Ankur Raval has over 8 years of experience as Deputy Manager in Electrical and Automation at Essar Steel Limited in Surat, India. He is responsible for maintenance planning and execution of electrical equipment, energy management, safety standards, and cost reduction. He has hands-on experience with automation technologies like PLCs, DCS, SCADA, and drives from Siemens, ABB, and other manufacturers. He also has skills in instrumentation, loop calibration, valve commissioning, and predictive maintenance of industrial assets.

1.  Deputy manager at Essar steel (i) ltd 
8+ years experience in Electrical and Automation at cold rolling complex
PRESENT JOB PROFILE:
Presently I am working with ESSAR STEEL LIMITED, HAZIRA-SURAT
(ISO9001: 2000, ISO: 14001, OHSAAS-17001, 5S certified) is one of the leading
Industrial Houses in India. Iron and Steel are one of the major thrusts at the
forefront of ESSAR's growth strategy. ESSAR has set up a 10 MTPA Hot Rolled
Coil plant (HRC) and Cold Rolling Complex, which are highly automated and
gave me real insight to the fundamentals of Electrical and Automation.
With the current position of Deputy Manager in Electrical & Automation Dept, of
Cold Rolling Mill complex in following Plants:
• Two pickling lines
1.fully continuous line
2. semi continuous line
• Acid regeneration plant
Ankur P Raval
Surat,India
Mobile : +918980990435
E Mail : ankurraval86@gmail.com

2. Responsibility:-
• Maintenance Planning and execution of Transformers, motors, instruments, HT
& LT switchgears.
• Maintain Maintenance history of Transformers, motors, instruments calibration
report, HT & LT switchgears.
• Maintain Energy Management System.
• Spares Material Planning.
• Maintain standard of Safety, 5S, Quality Circle, OHSAS.
• Maintain safety guideline, SOP, HIRAC during the job execution.
• Constantly focus on energy saving, cost saving and plant reliability.
• Maintain Gas, Smoke and Fire detection system.
Hands on Experience with various Automation and Drive Products like PLC’s
(SIEMENS S7 400 & ABB AC 800 M ), MOORE DCS, SCADA (INTOUCH, WONDER
WEAR), DC Drives (CONTROL TECHNIQUES, MENTOR-2), Siemens (Micro master
440, Simovert VC, Simovert MC AC drives), ABB (DCS 500 DC drives & ACS800 AC
Drives).
Job Includes Getting Analog and Digital signals from the field through Hardwiring,
connecting it to the Signal Modules, Programming, Modifying and Monitoring the
Logics. SCADA development using Graphic designing, Tag Generation, Tag
Assignment.
Hands on experience with ABB DRIVE WINDOW software for easy diagnoses of
parameters, signals and faults.
Hands on experience with IBA ANAYLSER software for process data acquisition.
ACADEMIC CREDENTIALS
 Diploma in electrical Enginnering , Technical education board, gujrat
CAREER SUMMARY
Working in Essar steel (i) ltd from 4 jun 2007 to till date
PROFESSIONAL EXPERIENCE
Electrical:-
• Predictive and Preventive maintenance of Transformers, HT/LT switch board,
HT & LT motors, Instruments, Fire detection system.
• Attend Break down and restore system in minimum time with safety.
Prepare FMEA, Root cause analysis. Keep MTBF and MTTR within norms.
• Testing of Power Transformer, varies types IDMT relays, HT cables, VCB & SF6
Breakers, ACB, HT motors.
• Calibration of sensors, flow meters, smoke/Gas detectors, servo valves.
• Maintain minimum spare material stock.
• Maintain drawings, manuals, test certificates, calibration reports, and
maintenance reports.
• Using SAP system. Document Management system.

3. Automation:-
• Troubleshooting, Maintaining, Implementation and Modification of Software and
Hardware structure for the Plant including PLCs with 12 RIO and Range of
Field Device. The PLC architecture includes RIOs and Profibus Enabled Field
Devices and Drives on a multimode Profibus Network.
• Development of Plant HMI System in Simatic WinCC software, Wonderware.
• Configuration, Parameterization and Troubleshooting of DCS 600 DC Drives,
ACS-800, SIEMENS AC DRIVES by Drive Window Software.
Summary of Skills & Experience in Instrumentation Field.
1) Commissioning & calibration of radar level transmitter, flow transmitter, PH
meter.
2) Commissioning & calibration of level switches, flow switches, pressure switches.
3) Commissioning of motorized, pneumatic valves.
4) Field devices like proximity switches, limit switches, micro switches & various
types of photo sensors.
5) Special field devices like coil diameter sensor, strip waviness measurement
sensor.
6) Maintenance of control valve such as temperature control, acid inlet, heating
etc.
HOBBIES & INTERESTS
 Music listing
 Reading
PERSONAL DOSSIER
Date of Birth : 14st
nov 1986
Nationality : Indian
Marital Status : Married, Blessed with 1 Kids
Linguistic Abilities : English, Hindi & Gujarati
Passport No :
Location Preference : Any gulf country