Mohammad Mintu is applying for the position of Instrument Supervisor and has over 14 years of experience in instrumentation for oil and gas projects in India and abroad. He provides his contact information, education qualifications including a diploma in instrumentation engineering, and describes his extensive experience in construction, commissioning, and maintenance of instrumentation systems. Mintu is looking to establish himself in an esteemed organization and utilize his skills and experience.

1. CURRICULUM VITAE
Mohammad Mintu
Email: - mdmintu006@gmail.com
Contact No. :- +91 8809613842/ +91 7549831752
Permanent Address : -
Mohammad Mintu
S/O – Mohammad Mahmood Alam
Village+ Post - Adsar
Dist. – Jamui (Bihar) 811307 India
Post Applied for Instrument Supervisor
Respected Sir,
I have came to know there are opening for the post of Instrument Supervisor in your esteemed organization. I
would like to present myself as a candidate for the same. I having a diploma in Instrumentation Engineering pulse
more than 14.06 years comprehensive experience in instrumentation (Oil & Gas field in India & Abroad) & control
combined with proficiency in managing Inspection Construction and Maintenance function. Ensuring compliance to
quality standards. Excellent relationship to the management with strong analytical problem solving, Sir given an
opportunity. I Promise my hard & intelligent works.
I am looking forward to your favorable reply,
Personal Profile :-
Name : MOHAMMAD MINTU
Father’s Name : MOHAMMAD MAHMOOD ALAM
Date of Birth : 10 March 1982
Place of Birth : Jamui
Martial statue : Married
Religion : Islam
Nationality : Indian
Languages know : English, Arabic, Urdu, & Hindi
Passport Detail :- : Passport no. :- L1323807(ECNR) Place of Issue :- PATNA
: Date of Issue : - 04/04/2013 Date of Expire :- 03/04/2023
Career Objective :-
To establish self in esteemed organization, proving self worthy to face all challenges.
Academic Qualification :-
S.S.C Passed in 1997 from St. Joseph Public School (janta high School )
Educational Qualification :-
Diploma in Instrumentation Engineering Passed in 2000 from Community Polytechnic Collage, Calcutta
Computer Literacy & Courses Attend :-
Proficient in Computer Application, MS Office(word excel, power point),knowledge internet, primavera.
HSE Induction, H2S Awareness and Escape, Basic Life Support, Job Hazard Analysis, Permit to Work.

2. Total Experience :- 14.06
Overseas experience :-
Company DA EMUYANG ENGINEERING
Designation Instrument Supervisor
Period 23-03-2016 to 10-08-2016
Project Sohar Refinery Project (Oman)
Company EPC SAMSUNG ENGG COMPANY
Designation Instrument Supervisor
Period 22-10-2014 to 27-02-2016
Project CPF 2 PROJECT Badra (IRAQ)
Company EPC DAELIM ENGINEERING
Designation Instrument Supervisor
Period 11-07-2013 to 25-08-2014
Project SADARA MFC PROJECT SAUDI ARABIA
Company EPC HEAVY HYUNDAI INDUSTRIES
Designation Instrument Supervisor
Period 17-05-2009 to 11-05-2013
Project SHABIYA POWER PLANT KUWAIT
Compan UTS KENTZ
Designation Instrument Supervisor
Period 23-03-2007 to 11-12-2008
Project OG 2 Gasco project abudhabi
Company KHARAFI NATIONAL
Designation Instrument Foreman
Period 17.08.2004 TO 30.01.2006
Project PIC SHUBA PROJECT KUWAIT
Indian experience :-
Company I C B LTD
Designation Instrument Foreman
Period 08-12-2001 to 09-12-2004
Project HAZIRA SURAT JAMNAGAR GUJRAT
Duties and responsibilities as an Instrument Supervisor & Foreman :-
 All types of Construction and Commissioning works from beginning to end the project works.
Explaining the job to workers and supervising during works like :-
 Experience in construction activities but not limited to

3. Construction Activities :-
 Preparation all inspection document & getting the material inspected.
 Conduct regular meeting with area in-charge, E&I Construction manager, consultants and problem solving
for technical/quality, aspect, materials schedule and other related project problem.
 Follow the installation works as per client’s standards and approved technical drawing and work programs.
 Supervision, Monitoring for Underground cable pulling, main ladder tray installation, Instrument stanchion
installation, Secondary ladder tray installation, Secondary cable pulling, Instrument installation and
Installation of new panel, junction box, proximeters and sensor.
 Tray, Impulse tube, Air pipe line, Conduit, Instrument and Junction box installation, Panel Errection, Support
Fabrication & Installation.
 Preparation of loop folders prior to loop checking. Specification check of all mounted instrument creating
punch list.
 Planning for Cable rooting, Cable pulling, Junction box and Instrument installation.
 Performs supervision of the installation of Electrical works which involve Power and Control Cable pulling,
Power & Control glanding and termination as per schedule installation of panel switch gear, LV switch gear
relay panel, associated to beaker testing meggering
 Earth Impedance Testing. Continuity testing, Breaker test, Battery test, Rotation test, Temperature test,
Vibration test for Non drive end and drive end for motor, Bus bar testing, Illumination test using Lux meter,
Relay test, PRD (pressure relief device test)
 Cable Glanding, Termination, Continuity check and Cable Meggering, Loop checking, Trouble shooting.
 Having sound knowledge of the plant safety rules and regulations.
 Sound knowledge about PTW (Permit to Work System).
 Calibration of all Pneumatic, Electronic, Smart & Field Bus Transmitters, Controller, Actuators, Control
Valve, I/P Converters, Thermocouple, RTD, Air Filter Regulators, ON/OFF Shutdown Valves, Solenoid
Valve etc.
 International Engineering Standard, Industries code & practices (NEC, API, ISA, NEMA And NFPA) ISO-
9001, QCP & ITP.
 Responsibility of raise RFI for client inspection for Electrical & Instrument related jobs Instrument junction
box, Cable tray rooting, Air pipe line, Impulse tubing, Cable termination, Clear the punch listing prior to
MCC completion.
 Control manpower engaged at the site for smooth works.
 Supervise employees in accordance with company policies & procedure.
 Avoid accident possibilities during the job period by giving proper guideline to the works

4. Commissioning and maintenance in Instrumentation :-
 Preparation of documents, Loop checking, Trouble shooting.
 Reviewing logic Diagram, Sequence flow chart, safeguarding and fire & gas logic and start up line up all
Instruments.
 Preparation and Review of pre-commissioning/commissioning documents check sheet, Test sheet.
 Performing and witnessing the all type of Instrument TX, Control Valve, ESD, ON/OFF Valve and MOV.
 Performing in Loop checking and fault finding as per Loop Wiring & schematic logic diagram.
 Performing Control Valve & ESD Valve operation and stoke test.
 Start up time line up the all Instrument and Level Transmitter are filling the particular fluid in the tubing.
 Troubleshooting of all type of Instrument and line up the Instrument.
 Witness and acceptance the commissioning loop folders as per system & sub system.
 Preparation of punch list and Review of Pre-commissioning & Commissioning Dossiers.
 Assisted vendor engineer for configuring points values, alarm set point, H/L points and Service description
for the respective loops as per the details/ feedback from the client.
TECHNICAL QUALIFICATION:
 Obtain Advance Diploma in Industrial Automation (ADIA) from Technocrat Automation
Pvt.Limited(IAO Accredited),Chennai.With 5 months hands on Practical experience in Industrial
Automation tools specializing in PLC,SCADA,DCS,P&FI,PAC and VFD.
TECHNICAL SKILLS
 PLC (Programmable Logic Controllers) & Programming languages such as LD(Ladder Diagram) &
FBD (Functional Bloc diagram)
 Hands on Practical exposure in brands as Siemens, AB (Allen Bradely), ABB (Asea Brown
Boveri), GE-FANUC,KEYENCE,OMRON
 SCADA (Supervisory Control & Data Aquisition) – Screen Designing,PLC interface,Data Collection
and storage
 VFD (Variable Frequency Drive) – Commissioning and Troubleshooting
 PAC(Programmable Automation Controller)
 DCS (Distributed Control System)
 Pneumatics & Field Instruments (Cntrol Valve, Sensors, Level Transmitters, Flow Transmitters,
Temperature Transmitters, Pressure Switches)
 Knowledge in Panel wiring
 Troubleshooting - PLC Programming
- Control Panel (Power wiring & Cotrol wiring)
Fire and Gas :-
 Maintenance and Faultfinding of Fire Gas Detecting equipment such as UV/IR flame detector, Smoke detector, Heat
detector, Fire detector, LEL detector, H2S Detector, Open path detectors etc.
 Servicing and Troubleshooting of all Detectors, Card Installation of Detector.

5.  Fire and Gas analyzer Instrument, Loop checking.
Test Equipment and Instrument :-
 Multifunction Calibrator, Decade Resistance Box, Dead Weight Tester, Pneumatic, Hydraulic, mA Source,
Temperature bath, Tk3, Pressure Calibrator (Fluke, Druck) Loop Calibrator (Fluke & GE), Communicator:-
275/375/475, Open path test kit, Gas Cylinder, U/V Torch etc.
 Level:- Level TX, Level switch, Level gauge.
 Pressure:- Pressure TX, Pressure switch, Pressure gauge DP TX and DP gauge.
 Temperature:- Temperature TX, Temperature gauge, Temperature switch, RTD and Thermocouple.
 Flow:- Flow TX, Flow switch, Flow meter, Vortex, Electromagnetic.
Drawing Knowledge :-
• Instrument Point layout drawing.
• Piping & Instrument Drawing.
• Instrument data sheet.
• Instrument loop drawing.
• Vendor document.
• Interlock drawing
• Instrument process hook-up drawing.
• Cable tranches layout drawing
• Primary & Secondary cable rooting drawing.
• Piping arrangement drawing.
• Isometric drawing.
• Instrument material system sheet.
• Instrument specification sheet.
• Electrical cable tray rooting drawing
• Lighting drawing
• Termination schedule drawing
DECLARATION
I hereby declare that the above particulars furnished by me are true to the best of my
knowledge and belief.
Date : Mohammad Mintu