This document contains a summary of Mohammed Aijaz Hussain's career experience and qualifications. He has over 8 years of experience as a civil engineer working on projects in Qatar, UAE, Oman, and Saudi Arabia. His experience includes working as a project engineer, senior civil engineer, and civil engineer on various construction projects such as tunnels, airports, roads, and industrial facilities. He holds a BTech in Civil Engineering and qualifications in AutoCAD, Revit, safety, and quality management.

1. MOHAMMED AIJAZ HUSSAIN
Mobile: 974-31221945
Aijazhussain2010@gmail.com
CAREER OBJECTIVE:
An Overall Experienced (8 yrs) B.tech in Civil Engineering (INDIA) seeking for a Challenging
Opportunity to be involved with an organization that encourages participating effectively in
Managing challenging endeavours, as a Project Engineer for satisfying the organisations
Objectives.
PROFESSIONAL SUMMARY:
● Worked at UCC-BOUYGUES IDRIS PROJECT as a Project Engineer Activities Involved
Grouting , Construction for Capping Beam , Excavation for Shaft , NATM , VSM
● Involved in construction of Shed area foundations & ground beams, High mast &
VDGS foundations, storm water, sewerage water & firefighting water lines, LV, ELV &
EFSO duct banks, fuel lines, PQ slabs, existing apron saw cutting& laying of
underground services & road works for the terminal expansion of Fly Dubai airlines at
Dubai International Airport
● Worked at Al-Maktoom International Airport (Terminal JXB-030) as a Sr.Civil Engineer
was responsible for laying dry & wet underground services.
● Worked as Sr.Civil Engineer for the construction of Runway and Airport Facilities like
Airfield Ground lightening duct bank & primary & secondary ducting at Das Island
Airport

2. WORK EXPERIENCE
Urbacon Contracting company
Doha Qatar
Project Engineer
September 2015 – May 2016
Job Responsibilities:
● Prepare Method of Statement for Excavation NATM & VSM SHAFT
● Overseeing and Enforcing Safety Policies within Tunnelling works
● Overseeing and Enforcing the Environmental Policies within Tunnelling works
● Assessing and Reviewing design work on site Supervising and Advising tunnel
Construction Plan and Sub-contractor
● Worked Involved Prepare Shaft Grouting Method of statement , Check the mix design
for Grouting , Density and viscosity , Drilling , Verticality Test , Installation for TAM
pipe , Grouting for packer and Tam pipe , check Jean Lutz Parameter for Drilling and
Grouting , Prepare daily Production Report and submit to Manager ,
● Worked Involved Review Method of Statement for Capping Beam , Construction for
Capping Beam and Parapet wall ,
● Site Supervision and Coordination of the Continuous Running of the Tunnelling Works
● Worked Involved Installation for Wire Mesh & Rock bolt and shotcrete
● Organize Material and Manpower , Prepare Daily Site Report for Production & Sub
contractors
● Maintained and documented reports on a daily basis regarding the projects assigned to
various departments.
● Specified the time and elements of construction contracts

3. Al-Naboodah Construction Group
Company, UAE
Sr.Civil Engineer
December 2013 – Augest 2015
Projects:
● Dubai International Airport (Client: Dubai Civil Aviation and Consultant: Dar Al -
Hadassah).
● Al-Maktoom International Airport (Client: Dubai Civil Aviation and Consultant: Dar
Al -Hadassah).
● Comprehensive R881-2A1 Parallel Road & Bridge Work in Business Bay Dubai.
(Client: Parson)
● Das island development of Construction of Runway and Airport Facilities
(Client: Abu Dhabi National Oil Company (ADNOC) and Consultant: Dorch
Job Responsibilities:
 Maintained and documented reports on a daily basis regarding the projects assigned to
various departments.
 Specified the time and elements of construction contracts.
 Analysed and monitored the project reports to sort out issues in the documentation part.
 Sending Breach of Notices to the Sub-Contractors, for delaying the progress.
 Managing the Site-Construction liaise with Project Manager and Site Engineers.
 Construction of Blue water facility and Portable water facility Construction
 Construction on Substation Works
 Prepare Project Program for 3 Weeks Look ahead in Candy software
 Supervise the construction of project to ensure that the work is executed to the client's
specifications. Finish the major excavation of earth work for Bridges ,Box Culvert ,
Apron Drain Channel , before the Schedule
 Handle variety of sector like civil structure works, Box Culvert’s, Apron Drain Channels,
Retaining Wall, Steel Fixing, Shuttering, Concrete Work AS per Client Approved
Drawings.
 After Finish the Steel Fixing or Shuttering Work Submit IR to the Client ,and Take
Approval for Concrete Work
 Timely Submit IR to the QC Department
 Before Excavation of Earth Work Make Excavation Permit, And Permission to Safety
Department.
 Planning and Make Schedule , DPR daily Submit to the Construction Manager
 Poring For Structure Make Safety Checklist and Submit to the QHSE
 Daily Take Safety Meeting for Crew Members, about PPE , Safety Harness
 Routine Check Scaffolding for Structure and Safety Tag , Safety Policies Apply
 Checking shuttering
 Knowledge of bar bending
 Before Excavation for Earth work check underground utility with cable detector.

4. Gal far Engineering & contracting SAOG
Company, OMAN
Sr.Civil Engineer
December 2011 – November 2013
Projects:
● MC-5 Development of Salalaha Airport (Client: Cowl Larsen & Hills International).
Roles and Responsibilities:
 Developed guidelines in the construction of special projects.
 Planned and oversaw entire program operations.
 Ensured that construction site is safe and that projects are completed safely and in
accordance with the specified standards.
 Worked in coordination with the project administrator and project managers to
complete the projects.
 Served as a point of contact from project inception to project completion.
 Worked with the project team members, clients and vendors to coordinate activities,
provisioning, environment setup, installation and integration testing.
 Worked under the supervision and guidance of the assistant project manager and
superintendent and learned project strategies from them.
 Allocated resources to various departments and managers as per their needs and
requirements.
 Attended annual meets and summits and presented upcoming projects.
 Supervise the construction of project to ensure that the work is executed to the client's
specifications.
 Supervise and monitor the site labor force through General Foreman monitoring the
work of any subcontractors to complete the work as per customer's satisfaction.
 Oversee quality control and safety matters on the site, and ensure that regulations are
adhered to.
 Prepare necessary paperwork for the completion of work and get it authorized by the
client after their inspection.
 Oversee the selection and requisition of materials for use in the construction /
maintenance, to check whether the materials are as specified.
 Prepared Drawings for Civil Structural Drafting, Steel/R.C.C Detailer
 Prepared Drawings for Underground Services, for Water Sewerage line Electrical
Cables, Manholes, Telephone Lines, Substations,etc.

5. Saudi Bin Laden Group (RPD)
Company, SAUDI ARABIA
Civil Engineer
November 2008 to November 2010
Job Responsibilities:
 Execute the project within the time frame & monitor day - day Construction activities
and produced site progress reports.
 Worked in coordination with the project administrator and project managers to
complete the projects.
 Served as a point of contact from project inception to project completion.
 Worked with the project team members, clients and vendors to coordinate activities,
provisioning, environment setup, installation and integration testing.
 Supervision of work in Concrete & Asphalt Road’s, Irrigation projects, underground
Services of Building Project’s.
 Prepared Drawings with AutoCAD for Alupco Aluminum Doors & Windows.
 Supervise of work Aluminum Doors & Windows for High Rise Building Projects.
 Supervision of work Excavation and Backfilling of water pipe line, sewage pipe line,
Electrical Cables’.
 Supervision of all design work on a specific project, frequent contact with Project
Engineering..
 Quality Analyzing Monitoring and Controlling the Quality of civil works at
Construction site.
 Supervise of work in Fabrication & Erection of Structural Steel work for Industrial
project.
PROFESSIONAL QUALIFICATION
BTech in Civil Engineering (2008, First Class)
Banglore Technological University, Bangalore, India.
Diploma in Civil Engineering (2004, First Class)
QuliQutub Shah Polytechnic, Hyderabad, India
Diploma in Autocad 2D,3D,3DMAX,REVIT
QuliQutub Shah Polytechnic, Hyderabad, India
ADVANCED SCAFFOLDING AND TAG INSPECTOR
Bureau viretas
CANDY SOFTWARE (PLANNING AND RESOURCES)

6. Safety and Quality Responsibilities:-
 Maintain standards of safety and comply with Company’s Health, Safety and
Environment Management System requirements.
 Take reasonable care of own health and safety and that of others in the
workplace. Follow and maintain Company standards of Quality in accordance
with Company Quality System requirements
PERSONAL INFORMATION:
Date of Birth: 5th march1983
Marital Status: Married.
Nationality / Religion: Indian / Islam
Languages Known: English &Arabic.
Driving License: UAE & QATAR.
REFERENCES:
Available on request