C. Vengal Reddy is a DGM of Refractories at Jindal Steel and Power Limited in Angul, Odisha. He has over 21 years of experience in the refractories field working for various steel and ceramic companies. He holds a diploma in Ceramic Technology and B-Tech in Ceramic Technology. His responsibilities have included annual budgeting, technical discussions with vendors, minimizing refractory consumption and cost control, and handling refractory management services.
1. PROJECTS EXECUTED: OIL & GAS AS WELL AS BUILDING CONSTRUCTION PROJECTS ( AS A SUPERVISOR CIVIL)
1- Acting as a link between Civil Engineers and the Foreman & charge hand.
2- Execution of storm water trench, hot oil trench, electrical trench, post padding by sand for all pipelines, grade slab, paving, shim plate installation, anchor bolt installation in various foundations, pedestal casting and installation,
Manhole casting and installation, grouting of vessels and sewer pipe, fencing foundation casting and its installation.
3- Conducting Tool Box Talk on everyday basis on starting work Activity at site.
4- I can take permit of any work as per client specified specification and requirements.
5- I can execute any work in safe and in well-disciplined manners to give better output towards to achieve organization goals.
6- I can also execute more than 5 activities at a time on site by providing better output.
7- Assisting the site Foreman and charge hand in all site civil construction activities from foundation up to final finishing stage 8- Supervising all construction activities and providing technical inputs for construction and coordination with the site management.
9- Anchoring on-site construction activities to ensure completion of project within the time and cost parameters and effective resource utilization to maximize the output.
10- Checking the physical and chemical composition of materials such as concrete, brick, Block, Cement, aggregates (fine as well as coarse), Steel and plywood.
11- Calculation of materials for construction works at site.
12- Giving detailed notes on daily progress report to me superior about every day work.
13- Preparation of BBS, Supervision and Execution of Entire Civil works like Excavation, Backfilling, Compaction, Surface protection, Form work, Rebar work, Concreting Masonry work, Block work, plastering, Water proofing work Painting, Plumbing, Tiling and Flooring work.
• Well pad development and installation of foundation for pipelines.
Finmeccanica: signed a contract worth USD 1,334 million for Honolulu driverle...Leonardo
Finmeccanica, through its companies Ansaldo STS and AnsaldoBreda, has signed a contract worth USD 1,334 million (net of Hawaiian GET tax) with HART (Honolulu Authority for Rapid Transportation) to supply the technology and vehicles for the new driverless metro line for the city of Honolulu (State of Hawaii).
1. PROJECTS EXECUTED: OIL & GAS AS WELL AS BUILDING CONSTRUCTION PROJECTS ( AS A SUPERVISOR CIVIL)
1- Acting as a link between Civil Engineers and the Foreman & charge hand.
2- Execution of storm water trench, hot oil trench, electrical trench, post padding by sand for all pipelines, grade slab, paving, shim plate installation, anchor bolt installation in various foundations, pedestal casting and installation,
Manhole casting and installation, grouting of vessels and sewer pipe, fencing foundation casting and its installation.
3- Conducting Tool Box Talk on everyday basis on starting work Activity at site.
4- I can take permit of any work as per client specified specification and requirements.
5- I can execute any work in safe and in well-disciplined manners to give better output towards to achieve organization goals.
6- I can also execute more than 5 activities at a time on site by providing better output.
7- Assisting the site Foreman and charge hand in all site civil construction activities from foundation up to final finishing stage 8- Supervising all construction activities and providing technical inputs for construction and coordination with the site management.
9- Anchoring on-site construction activities to ensure completion of project within the time and cost parameters and effective resource utilization to maximize the output.
10- Checking the physical and chemical composition of materials such as concrete, brick, Block, Cement, aggregates (fine as well as coarse), Steel and plywood.
11- Calculation of materials for construction works at site.
12- Giving detailed notes on daily progress report to me superior about every day work.
13- Preparation of BBS, Supervision and Execution of Entire Civil works like Excavation, Backfilling, Compaction, Surface protection, Form work, Rebar work, Concreting Masonry work, Block work, plastering, Water proofing work Painting, Plumbing, Tiling and Flooring work.
• Well pad development and installation of foundation for pipelines.
Finmeccanica: signed a contract worth USD 1,334 million for Honolulu driverle...Leonardo
Finmeccanica, through its companies Ansaldo STS and AnsaldoBreda, has signed a contract worth USD 1,334 million (net of Hawaiian GET tax) with HART (Honolulu Authority for Rapid Transportation) to supply the technology and vehicles for the new driverless metro line for the city of Honolulu (State of Hawaii).
Zyskaj czas - prezentacja projektu Indesit + Digital OneOlgierd Cygan
Prezentacja kampani reklamowo-sprzedażowej "Zyskaj czas" przygotowanej przez Digital One dla Indesit Polska. Kampania prowadzona w internecie. Prezentacja przygotowana na Mixx Awards 2013.
Nos ajude a escolher o Antenado do ANO. Leia os perfis e vote pelo email: antenados@ramacrisna.org.br
Conheça o projeto: www.projetoantenados.blogspot.com
A PROJECT REPORT ON
“Eliminating corner gap in sc mould at LD2 SNC”.
During the internship the following research is evaluated and being verified by the authorized TATA steel employee.
1. CURICULAM VAITE
C. VENGAL REDDY
Phone: +91 9937410806 (Per) Flat.no – D-19/3
Phone: +91 9777446627(Off) JSPL Township
JSPL, ANGUL
ODISSA
ODISSA – 735111.
cvreddyhospet@yahoo.co.in
cvreddy_kalyani@rediffmail.com
Name : CHEMARLA VENGAL REDDY
Father Name : Shri. C. Seshi Reddy
Date of Birth : 08-07-1972
Marital status : Married
Languages known : English, Hindi & Telugu
Presently stationed at : JSPL Township, Angul .
EDUCATIONAL QUALIFICATIONS:
Institution
Diploma in Ceramic Technology
Govt. Institute of Ceramic Technology,
Gudur – A.P.
B-TECH in CERAMIC TECHNOLOGY
CGCRI (Central Glass & Ceramic Research Institute)
Kolkata.
RESPONSIBILITIES:-
• ANNUAL BUDGETING.
•TECHNICAL DISCUSSION WITH VENDORS and FINALIZATION.
•SELECTION OF REFRACTORIES IN RESPECTIVE AREAS.
• PROCUREMENT PLANING.
•MINIMIZEING REFRACTORY CONSUMPTION and COST CONTROL .
•MONITORING THE PERFORMANCE ON REGULAR BASIS AND STEPS FOR
IMPROVEMENT.
•EXECUTING THE LINING JOBS AS PER DESIGN.
•STUDYING REFRACTORY PRODUCTS PERFORMANCE OF DIFFERENT
SUPPLIERS.
•HANDLING CONTRACTORS & THEIR WORKFORCE.
•REFRACTORIES INSPECTION.
•FURNACE DESIGN & DEVELOPMENT.
•HANDLING REFRACTORY MANAGEMENT SERVICES.
•PROJECTS EXPERIENCE.
•M AINTAINING SAFETY and 5s ACTIVITIES IN REFRACTORY AREAS.
WORK EXPERIENCE: More than Twenty One years as mentioned below:
2. At present I am working as DGM , REFRACTORY IN M/s. JINDAL STEEL and
POWER LIMITED. ANGUL.
M/S. Jindla Steel & Power
Limited.
DGM .
Aug-2013 to Responsible for All refractory areas.
LDP:-500x2 kilns(cimprogetti technology)
DRI:-
Capacity 1.85 million Tone Gas based vertical
shaft furnace .(Midrex technology) with
Gas heater.(linde technology)
EAF :-
Capacity 250 MT.(Biggest EAF in india)
LRF :-250 MT Ladles.
Twin station RHD and VD
Slab Caster single strand :- 200,260 & 300
mm thickness and width 1500mm to 2300
mm.
Billet Caster Eight strand:- 165x165 mm.
(open and close casting)
RHF:- 250 tph (five stein technology)
RHF:-Reheating furnace
Widest plate mill (width 5000 mm)
Power plant :- 6 X 135 kv.
M/s kalyani carpenter
special steels ltd.
Pune.
Associate Vice President.
In Refractory.
Mar-2010 to
July-2013
3,1/2 years
In charge for all refractory jobs,
EAF –Capacity 30MT(With S/G taping system)
ROOT ----
LRF - VD – VOD – CCM & INGOT
CASTING.
ROOLING MILLS (Refractory jobs)
(KCSSL is making 100% alloy steels )
3. M/s ISMT Ltd., Pune
Asst. VICE PRESIDENT
Refractories
Feb’06 – feb-10
4 years
• 03 plants in and around Pune.
•Responsible for total refractory applications and
its performance at all 3 plants. Steel Plant with 0.3
MTPA with 50 ton EAF LF/VD-Caster, & 6
MTPA capacity Seamless Tube plant containing 2
Rotary Hearth Furnace (70 ton & 30 ton), BQF
Mill.
•Maintenance of 50 M T EAF and responsible for
smooth operation of Furnace including lining,
gunning, fettling and ramming
•Ladle lining and ladle supervising, ladle purging
system, Slide gate operation
•EAF roof delta casting and proper heating
•VD Heat shield lining and casting
•Rolling mill Re-heating furnace refractory
maintenance and applications
•Rotary hearth furnace relining and refractory
maintenance
•Bogie hearth furnace maintenance
• Maintaining & ensuring availability of all
equipment for production from refractories side.
M/s OCL India Ltd,
Rajgangpur - Orissa.
Officer (Marketing &
Tech. Services)
Posted at Jindal
Vijaynagar Steel Plant
(JSW)
2,1/2 Years
Oct’03 - Feb’06
•Based in Hospet, I was given the responsibility to
handle total technical services in South India with
main concentration on M/s JSW Steel. Monitoring
Ladle Lining, performance, cost analysis, order &
payment follow-up were typical responsibilities.
•Established EOF gunning material & Mag-Carbon
bricks at M/s Hospet Steels (Mukand & Kalyani
JV)
•Also established EOF gunning material at M/s
SISCOL, Salem.
•Introduced SEN, Ladle shroud & Castable in
M/s Kirloskar & Ferrous and M/s Sterlite
copper.
M/s MPR Refractory Ltd,
Hyderabad .
Asst. Manager (Tech.
Services)
Posted at M/s Vizag Steel
Plant (VSP)
4 Years
July’99- Sept’03
•Looking after, all commercial & technical jobs
like BF Hot metal ladle & Terpedo ladle lining,
Mixer ladle & Steel teaming ladle lining in SMS
area etc. at VISAKHAPATNAM STEEL PLANT
in behalf of M/s MPR Refractory Ltd.
•Attending customer complaints time to time in
various areas.
M/s SKG Refractories
Ltd., Nagpur.
Asst. Manager
(Production)
2 Years
July’97-June’99
•Handling total production PPC, Quality
management & Cost analysis.
•Successfully produced Mag-Carbon products &
supplied to all major steel plants.
4. M/s MPR Refractory Ltd,
Hyderabad .
Engineer – Production &
Service
2 Year
May’95-June’97
•Monitoring installations of LADLES & Mixer.
•Study of operational parameters at VSP and make
necessary modifications at production side for
improvement in performance.
•Wear profile study & refractory consumption
analysis at VSP.
•Preparing new designs & recommendation of
zonal lining concept in Steel Ladle.
•Follow up for new trial orders etc,
•Regular visit to VSP.
INPLANT TRAINING: (One year)
Company Period Profile
1. M/s HMT Glass Limited,
Hyderabad.
6 months •Undergone overall training in QC, R&D and
production departments.
•HMT is producing electrical bulbs & tubes.
2. M/s STILES (I) Ltd. Tirupathi. 6 months •Overall training in PPC, batch house, Roller kiln,
presses and R&D.
•Producing all types ceramic tiles.
COMPUTER SKILLS:
•Able to prepare reports, charts, graphs using the latest version of Microsoft office.
•Familiar with Micro Soft POWER POINT.
•Regularly accessing the Internet for mailing & surfing purpose.
Hobbies: Play Cricket, Volleyball and Reading technical papers & magazines.
Being young, sincere, energetic and hard working besides having versatile experience, I
sincerely believe that I will be able to deliver best results if I am given an opportunity to
serve your esteemed organization.
(C. VEGAL REDDY)
Date:
Place:
5. M/s MPR Refractory Ltd,
Hyderabad .
Engineer – Production &
Service
2 Year
May’95-June’97
•Monitoring installations of LADLES & Mixer.
•Study of operational parameters at VSP and make
necessary modifications at production side for
improvement in performance.
•Wear profile study & refractory consumption
analysis at VSP.
•Preparing new designs & recommendation of
zonal lining concept in Steel Ladle.
•Follow up for new trial orders etc,
•Regular visit to VSP.
INPLANT TRAINING: (One year)
Company Period Profile
1. M/s HMT Glass Limited,
Hyderabad.
6 months •Undergone overall training in QC, R&D and
production departments.
•HMT is producing electrical bulbs & tubes.
2. M/s STILES (I) Ltd. Tirupathi. 6 months •Overall training in PPC, batch house, Roller kiln,
presses and R&D.
•Producing all types ceramic tiles.
COMPUTER SKILLS:
•Able to prepare reports, charts, graphs using the latest version of Microsoft office.
•Familiar with Micro Soft POWER POINT.
•Regularly accessing the Internet for mailing & surfing purpose.
Hobbies: Play Cricket, Volleyball and Reading technical papers & magazines.
Being young, sincere, energetic and hard working besides having versatile experience, I
sincerely believe that I will be able to deliver best results if I am given an opportunity to
serve your esteemed organization.
(C. VEGAL REDDY)
Date:
Place: