Correct Glove for the Task
•Download as PPSX, PDF•
1 like•546 views
This toolbox talk discusses the importance of using the correct type of glove for different construction tasks to prevent hand injuries. It provides examples of the types of gloves used for welding, working with chemicals, general construction work, and electrical work. The key message is that the glove chosen should match the risks identified in the task risk assessment in order to protect hands from burns, chemicals, sharp objects, and other hazards.
Report
Share
Report
Share
Recommended
Tips for welding in a safe manner
Welding requires safety precautions to avoid disastrous consequences from fires or injuries. Before welding, inspect equipment for leaks and wear, prepare the work area by removing combustibles, and ensure proper ventilation and fire extinguishers are available. Dress appropriately in flame-retardant clothing that fully covers the body, and always wear an arc mask to filter ultraviolet and infrared rays.
Hand protection
The workplace can create many hazards for your hands, whether from chemicals, cuts or burns. No single glove can provide appropriate protection for every work situation, hence we have amply types of hand protection gloves and it is important to assess the risk for each task and select a glove that provides specialized protection.
Hand Protection Overview
This document provides an overview of hand protection categories and materials. It discusses the main categories of gloves including leather, cotton, supported, unsupported/disposable, and activity/mechanics gloves. The key materials used in gloves are also examined, such as nitrile, neoprene, vinyl, cotton, nylon, polyester, aramid, HPPE, and various engineered fibers. Standards for cut resistance testing and Cordova's high performance glove lines are also summarized.
Asbestos testing mackay
One day maybe you wonder whether or not your home contains asbestos. As we know, asbestos-containing material (ACM) is widely used in 1980s and mostly can be found in roofing wall sheeting, floor sheeting, fencing, eaves, insulation and hot water systems.
Renz Ring Wire Opner
The RING WIRE OPENER is a compact, handheld device that easily opens wire or spiral bindings without damaging paper. It can open bindings from 6.9-25.4mm in diameter at a rate of up to 360 books per hour. The device simply slides along the wire seam to remove the binding without tools or effort. Additional sheets can then be inserted to rebind the document with a new wire or element.
Housekeeping
The document discusses the importance of good housekeeping for safety. It states that good housekeeping is the first law of accident prevention and is a responsibility of all workers. Poor housekeeping can lead to unsafe conditions and implies an unprofessional work environment. The document provides tips for maintaining good housekeeping such as cleaning up the work area, disposing of waste properly, and storing materials and tools safely. Good housekeeping promotes efficiency, morale and reduces accidents.
Guidelines in dryer vent cleaning in manhattan
Dryer vent cleaning is important for safety and efficiency. Over 15,000 clothes dryer fires occur each year due to uncleaned dryer vents. When lint builds up in dryer vents, heat and moisture cannot escape which causes the dryer to work harder and increases fire risks. Dryer vents should be cleaned at least once or twice a year to prevent fires and improve dryer performance.
100% pass NEBOSH, PMP, LEED, IOSH, NFPA, IIRSM, NUCO, MEDICFIRST, Highfield, ...
100% pass NEBOSH, PMP, LEED, IOSH, NFPA, IIRSM, NUCO, MEDICFIRST, Highfield, ...ISDTIS KENNIS TRAINING INSTITUTE
INTERNATIONAL SKILL DEVELOPMENT TRAINING INSTITUTIONS
Soft Skills Training Programs
Management Skills Training Programs
Technical Skills Training Programs
Up Skills Training Programs
Employment oriented Skills Training Program
Contact us: 044- 24311557 / 9176733557 info@anytraininganywhere.com
Recommended
Tips for welding in a safe manner
Welding requires safety precautions to avoid disastrous consequences from fires or injuries. Before welding, inspect equipment for leaks and wear, prepare the work area by removing combustibles, and ensure proper ventilation and fire extinguishers are available. Dress appropriately in flame-retardant clothing that fully covers the body, and always wear an arc mask to filter ultraviolet and infrared rays.
Hand protection
The workplace can create many hazards for your hands, whether from chemicals, cuts or burns. No single glove can provide appropriate protection for every work situation, hence we have amply types of hand protection gloves and it is important to assess the risk for each task and select a glove that provides specialized protection.
Hand Protection Overview
This document provides an overview of hand protection categories and materials. It discusses the main categories of gloves including leather, cotton, supported, unsupported/disposable, and activity/mechanics gloves. The key materials used in gloves are also examined, such as nitrile, neoprene, vinyl, cotton, nylon, polyester, aramid, HPPE, and various engineered fibers. Standards for cut resistance testing and Cordova's high performance glove lines are also summarized.
Asbestos testing mackay
One day maybe you wonder whether or not your home contains asbestos. As we know, asbestos-containing material (ACM) is widely used in 1980s and mostly can be found in roofing wall sheeting, floor sheeting, fencing, eaves, insulation and hot water systems.
Renz Ring Wire Opner
The RING WIRE OPENER is a compact, handheld device that easily opens wire or spiral bindings without damaging paper. It can open bindings from 6.9-25.4mm in diameter at a rate of up to 360 books per hour. The device simply slides along the wire seam to remove the binding without tools or effort. Additional sheets can then be inserted to rebind the document with a new wire or element.
Housekeeping
The document discusses the importance of good housekeeping for safety. It states that good housekeeping is the first law of accident prevention and is a responsibility of all workers. Poor housekeeping can lead to unsafe conditions and implies an unprofessional work environment. The document provides tips for maintaining good housekeeping such as cleaning up the work area, disposing of waste properly, and storing materials and tools safely. Good housekeeping promotes efficiency, morale and reduces accidents.
Guidelines in dryer vent cleaning in manhattan
Dryer vent cleaning is important for safety and efficiency. Over 15,000 clothes dryer fires occur each year due to uncleaned dryer vents. When lint builds up in dryer vents, heat and moisture cannot escape which causes the dryer to work harder and increases fire risks. Dryer vents should be cleaned at least once or twice a year to prevent fires and improve dryer performance.
100% pass NEBOSH, PMP, LEED, IOSH, NFPA, IIRSM, NUCO, MEDICFIRST, Highfield, ...
100% pass NEBOSH, PMP, LEED, IOSH, NFPA, IIRSM, NUCO, MEDICFIRST, Highfield, ...ISDTIS KENNIS TRAINING INSTITUTE
INTERNATIONAL SKILL DEVELOPMENT TRAINING INSTITUTIONS
Soft Skills Training Programs
Management Skills Training Programs
Technical Skills Training Programs
Up Skills Training Programs
Employment oriented Skills Training Program
Contact us: 044- 24311557 / 9176733557 info@anytraininganywhere.com
PSC Task Specific Gloves Range 2018
This document provides an overview and guide to task specific gloves sold by Project Sales Corp. It includes sections on chemical resistant gloves made of materials like nitrile, neoprene, butyl and PVC. It also covers heat resistant, fire, welding, cut resistant, cryogenic and inspection gloves. For each glove type, it lists brands and products carried by Project Sales Corp and their key features for protective different workplace hazards. The document is intended to help users select the appropriate gloves for their specific tasks.
Task Specific Work Gloves Guidebook 2017
This document provides an overview and guide to non-impact protective gloves. It discusses various types of non-impact gloves including chemical, electrical, fire, basic work, welding, cut resistant, cryogenic, inspection, hot mill, mechanics style and assembly gloves. For chemical gloves, it describes nitrile, neoprene, butyl and PVC gloves and provides details on specific glove products from companies like Ansell, Condor, Grainger, Rubberex, Superior and Honeywell. The document is a reference for selecting the appropriate type of non-impact glove for different work hazards and conditions.
Sharp objects presentation
The document provides tips for safely working with sharp objects and protecting hands from injuries. It discusses:
1. How to prevent puncture wounds through good housekeeping and being careful with power tools.
2. The proper first aid for puncture wounds and signs of infection to watch for.
3. Different types of gloves that can protect hands in various situations like disposable gloves, rubber gloves, leather gloves, and metal mesh gloves.
4. Additional hazards for hands like machinery, chemicals, heat/cold, electricity, and repetitive motions. It stresses using safety devices, guards, and disconnecting power before repairing equipment.
Hand Protection
Hand injuries are common in the workplace, accounting for 25% of lost time injuries. Using proper hand protection like gloves can reduce injuries by 20%. There are different types of gloves for various purposes, such as chemical resistance, heat resistance, cut resistance, and more. Proper glove selection and fit is important to provide effective hand protection.
Hand Safety 2020
This document discusses hand safety and proper hand protection. It notes that hands are important but vulnerable, as demonstrated by the inability to tie shoes with thumbs tucked inside. The document then outlines common hand injuries like cuts, punctures, sprains and injuries from rotating machinery. It provides examples of past accidents and notes that woodworking and manufacturing jobs commonly involve hand injuries. The document emphasizes choosing the right gloves and PPE for hazards, maintaining focus, and proper preventative actions and precautions to avoid injuries.
Hand safety 2020
This document discusses hand safety and proper hand protection. It notes that hands are important but vulnerable, as demonstrated by examples of common hand injuries like cuts, punctures, and crushed fingers. Several case studies describe specific hand injuries that occurred in woodworking facilities. The document emphasizes selecting the right gloves for the job and hazards, maintaining gloves, and following precautions like avoiding pinch points and using tools instead of hands. Proper hand protection, training, and precautions can help prevent disabling hand injuries.
Personal Protective Equipment
This document provides information on personal protective equipment (PPE) including training requirements and types of PPE used to protect the eyes and face, head, hands, feet, and body from workplace hazards. It discusses potential injury incidents related to impact, heat, chemicals, dust, light/radiation (eyes), falling/flying objects, electric shock, drips (head), cuts, burns, repetitive stress (hands), punctures, slips, extreme temperatures (feet), and chemical/heat exposure (body). The appropriate PPE to use depends on the hazard and includes safety glasses, goggles, welding helmets, hard hats, gloves, safety shoes, aprons, coveralls, and full body suits. Proper fit
Do cut resistant gloves really work.pptx
In the modern, fast-paced world, safety is of the utmost importance, and this is especially true in industrial settings, where workers are constantly at risk from pointed objects. This article investigates the efficacy of cut-resistant gloves by analyzing their practicality, advantages, and uses in actual life situations.
personal protective equipment 2023.pptx
This document discusses personal protective equipment (PPE) for welding. It describes various types of PPE including welding helmets, protective covers, leather jackets, aprons and gloves to protect welders from heat, sparks and radiation. Safety shoes, glasses, face shields, respirators and earmuffs are also outlined. Proper PPE is important to prevent injury and protect health when welding. The document provides examples of PPE and quizzes students on identifying appropriate equipment.
Hand safety toolkit from iadc website
This document provides guidance on hand safety through five toolbox talks focused on common hand injury hazards. Each talk highlights a "danger zone" and real injury examples to avoid. Gloves are identified as a secondary form of protection, with primary controls like proper hand positioning, guarding, and tool use being most effective to keep hands out of danger zones. The talks cover injuries from sharp objects, thermal/chemical burns, stored energy releases, and pinch points; emphasizing awareness of hazards and following safe work practices to minimize exposure and risk of injury.
Superior Glove PPE Automotive Overview OHS
This document provides information about hand injuries and protective gloves. It introduces several experts in safety equipment and discusses their backgrounds. It then gives statistics on common hand injuries and their costs. Different types of gloves are described that address multiple hazards like cuts, heat, oil, and dexterity. Key properties of Kevlar fiber that provide cut resistance and its use in gloves and sleeves are outlined. Design features of protective sleeves and proper glove sizing are emphasized for effective protection.
Must-Have Safety Gear for Construction Workers
Safety should be the top priority for any construction company. Basic protective gear like hard hats, safety glasses, gloves, and steel-toed boots can help prevent common injuries among workers like cuts, burns, and vision or hearing loss. Additional equipment such as harnesses and flame-resistant clothing may be needed when working with hazards like heights, welding sparks, or chemicals. Ensuring all workers have the proper safety equipment for each task can help reduce and potentially eliminate injuries and accidents on the job site.
Hand and Power Tools Safety and KYHS-LOF Refresher (1).pdf
This document provides an overview of safety considerations for using portable hand and power tools. It discusses common injury risks like electric shock, amputation, eye injuries, and hearing loss. It emphasizes the importance of guarding, using the proper tool for the job, inspecting tools for damage, carrying tools safely, and wearing appropriate personal protective equipment. The key message is that hand injuries are preventable through safety awareness, respecting hazards, and being conscious of hand placement at all times when using tools.
Protective clothing
This document provides guidance on proper protective clothing and equipment for various construction and industrial work tasks. It recommends wearing sturdy leather shoes with steel toes to protect feet from falling objects. When working in wet areas, rubber footwear should be worn. Hard hats should be worn when exposed to falling objects and must fit properly. Safety goggles or glasses should be worn when doing tasks like sawing, drilling, or using compressed air to protect eyes from hazards. Dust masks or respirators should be worn when working in dusty or toxic areas depending on concentration. Gloves should be worn when handling materials with sharp edges or when chemicals are present. Hearing protection like ear plugs or muffs must be worn in noise levels over 90
Hand Protection.pptx
This document discusses hand protection and proper glove use. It notes that hands are commonly injured, with 20% of disabling workplace injuries involving hands, including cuts, burns and fractures. The document outlines different types of gloves, their purposes, and limitations. Proper glove selection and fit can protect hands from knives, chemicals, heat, electricity and other hazards, but gloves may also present hazards if not selected and used correctly. Care and replacement of damaged or ill-fitting gloves is also discussed.
Hand Protection.pptx
This document discusses hand protection and proper glove use. It notes that hands are commonly injured, with 20% of disabling workplace injuries involving hands. Different types of gloves protect against various hazards like cuts, chemicals, heat, and electricity. The document emphasizes properly selecting gloves for the specific hazard, and notes that gloves can have limitations and need proper fitting, care, cleaning and replacement when damaged.
SAFETY ENGINEERING- Personal Protective Equipment
This document discusses various safety roles and personal protective equipment. It describes security personnel who help detect safety hazards and assist engineers. It outlines the types of checks security can perform and various hazards they may encounter. The document then discusses different types of personal protective equipment including head, eye, face, hand, foot, body, hearing and respiratory protection. For each type of protective equipment, it identifies common hazards, provides examples, and describes appropriate equipment to use.
TPC Aug 2015 issue - 1st Half
The document discusses construction site safety and emphasizes the importance of taking safety seriously. It provides several examples of construction accidents that permanently changed peoples' lives. It then offers specific safety tips for different tasks like using fall protection equipment, wearing proper protective gear, inspecting tools for hazards, and following manufacturers' safety instructions. The goal is to prevent injuries and save lives by promoting a strong safety culture in the construction industry.
Why People Wear Protective Clothing
Protective clothing is worn in certain jobs to prevent injuries and save lives. Garments like steel-toed boots, overalls, gloves, masks, and hard hats protect those in construction, medical, science, and welding fields from dangers like falling objects, chemicals, fluids, sparks, and more. Employers provide these important items to their valuable employees as accidents could be prevented if proper protective gear is worn for the task. People should always prioritize protective clothing if their work poses life-threatening risks.
Welding
Welding is a common method of joining metals that involves fusing two pieces together. It carries several hazards including impact, penetration, harmful fumes and heat/light radiation. Welding is considered high risk, especially in operating plants, but risks can be reduced through various defenses including training, barriers, permits, communication, assessments, PPE, supervision and emergency preparedness. Proper PPE like welding helmets, gloves, aprons and leg covers are required to prevent burns from hot metal and radiation. Spark containment and protecting others is also important for safety.
Line of fire safety
A short safety awareness session focussing on how to identify and prevent line of fire hazards and risks.
Alcohol and drug safety awareness
Drug and alcohol use pose significant health risks and social consequences. Worldwide in 2010, the average alcohol consumption was 6.2 liters per person over 15, which equals 13.5 grams of pure alcohol daily. That year, alcohol was attributable to around 3.3 million deaths globally or 5.9% of all deaths. Approximately 230 million people worldwide have used illicit drugs, with 15.3 million having drug use disorders. Drug use can negatively impact work performance through withdrawal symptoms, preoccupation with obtaining drugs, and illegal activities like drug sales to coworkers.
More Related Content
Similar to Correct Glove for the Task
PSC Task Specific Gloves Range 2018
This document provides an overview and guide to task specific gloves sold by Project Sales Corp. It includes sections on chemical resistant gloves made of materials like nitrile, neoprene, butyl and PVC. It also covers heat resistant, fire, welding, cut resistant, cryogenic and inspection gloves. For each glove type, it lists brands and products carried by Project Sales Corp and their key features for protective different workplace hazards. The document is intended to help users select the appropriate gloves for their specific tasks.
Task Specific Work Gloves Guidebook 2017
This document provides an overview and guide to non-impact protective gloves. It discusses various types of non-impact gloves including chemical, electrical, fire, basic work, welding, cut resistant, cryogenic, inspection, hot mill, mechanics style and assembly gloves. For chemical gloves, it describes nitrile, neoprene, butyl and PVC gloves and provides details on specific glove products from companies like Ansell, Condor, Grainger, Rubberex, Superior and Honeywell. The document is a reference for selecting the appropriate type of non-impact glove for different work hazards and conditions.
Sharp objects presentation
The document provides tips for safely working with sharp objects and protecting hands from injuries. It discusses:
1. How to prevent puncture wounds through good housekeeping and being careful with power tools.
2. The proper first aid for puncture wounds and signs of infection to watch for.
3. Different types of gloves that can protect hands in various situations like disposable gloves, rubber gloves, leather gloves, and metal mesh gloves.
4. Additional hazards for hands like machinery, chemicals, heat/cold, electricity, and repetitive motions. It stresses using safety devices, guards, and disconnecting power before repairing equipment.
Hand Protection
Hand injuries are common in the workplace, accounting for 25% of lost time injuries. Using proper hand protection like gloves can reduce injuries by 20%. There are different types of gloves for various purposes, such as chemical resistance, heat resistance, cut resistance, and more. Proper glove selection and fit is important to provide effective hand protection.
Hand Safety 2020
This document discusses hand safety and proper hand protection. It notes that hands are important but vulnerable, as demonstrated by the inability to tie shoes with thumbs tucked inside. The document then outlines common hand injuries like cuts, punctures, sprains and injuries from rotating machinery. It provides examples of past accidents and notes that woodworking and manufacturing jobs commonly involve hand injuries. The document emphasizes choosing the right gloves and PPE for hazards, maintaining focus, and proper preventative actions and precautions to avoid injuries.
Hand safety 2020
This document discusses hand safety and proper hand protection. It notes that hands are important but vulnerable, as demonstrated by examples of common hand injuries like cuts, punctures, and crushed fingers. Several case studies describe specific hand injuries that occurred in woodworking facilities. The document emphasizes selecting the right gloves for the job and hazards, maintaining gloves, and following precautions like avoiding pinch points and using tools instead of hands. Proper hand protection, training, and precautions can help prevent disabling hand injuries.
Personal Protective Equipment
This document provides information on personal protective equipment (PPE) including training requirements and types of PPE used to protect the eyes and face, head, hands, feet, and body from workplace hazards. It discusses potential injury incidents related to impact, heat, chemicals, dust, light/radiation (eyes), falling/flying objects, electric shock, drips (head), cuts, burns, repetitive stress (hands), punctures, slips, extreme temperatures (feet), and chemical/heat exposure (body). The appropriate PPE to use depends on the hazard and includes safety glasses, goggles, welding helmets, hard hats, gloves, safety shoes, aprons, coveralls, and full body suits. Proper fit
Do cut resistant gloves really work.pptx
In the modern, fast-paced world, safety is of the utmost importance, and this is especially true in industrial settings, where workers are constantly at risk from pointed objects. This article investigates the efficacy of cut-resistant gloves by analyzing their practicality, advantages, and uses in actual life situations.
personal protective equipment 2023.pptx
This document discusses personal protective equipment (PPE) for welding. It describes various types of PPE including welding helmets, protective covers, leather jackets, aprons and gloves to protect welders from heat, sparks and radiation. Safety shoes, glasses, face shields, respirators and earmuffs are also outlined. Proper PPE is important to prevent injury and protect health when welding. The document provides examples of PPE and quizzes students on identifying appropriate equipment.
Hand safety toolkit from iadc website
This document provides guidance on hand safety through five toolbox talks focused on common hand injury hazards. Each talk highlights a "danger zone" and real injury examples to avoid. Gloves are identified as a secondary form of protection, with primary controls like proper hand positioning, guarding, and tool use being most effective to keep hands out of danger zones. The talks cover injuries from sharp objects, thermal/chemical burns, stored energy releases, and pinch points; emphasizing awareness of hazards and following safe work practices to minimize exposure and risk of injury.
Superior Glove PPE Automotive Overview OHS
This document provides information about hand injuries and protective gloves. It introduces several experts in safety equipment and discusses their backgrounds. It then gives statistics on common hand injuries and their costs. Different types of gloves are described that address multiple hazards like cuts, heat, oil, and dexterity. Key properties of Kevlar fiber that provide cut resistance and its use in gloves and sleeves are outlined. Design features of protective sleeves and proper glove sizing are emphasized for effective protection.
Must-Have Safety Gear for Construction Workers
Safety should be the top priority for any construction company. Basic protective gear like hard hats, safety glasses, gloves, and steel-toed boots can help prevent common injuries among workers like cuts, burns, and vision or hearing loss. Additional equipment such as harnesses and flame-resistant clothing may be needed when working with hazards like heights, welding sparks, or chemicals. Ensuring all workers have the proper safety equipment for each task can help reduce and potentially eliminate injuries and accidents on the job site.
Hand and Power Tools Safety and KYHS-LOF Refresher (1).pdf
This document provides an overview of safety considerations for using portable hand and power tools. It discusses common injury risks like electric shock, amputation, eye injuries, and hearing loss. It emphasizes the importance of guarding, using the proper tool for the job, inspecting tools for damage, carrying tools safely, and wearing appropriate personal protective equipment. The key message is that hand injuries are preventable through safety awareness, respecting hazards, and being conscious of hand placement at all times when using tools.
Protective clothing
This document provides guidance on proper protective clothing and equipment for various construction and industrial work tasks. It recommends wearing sturdy leather shoes with steel toes to protect feet from falling objects. When working in wet areas, rubber footwear should be worn. Hard hats should be worn when exposed to falling objects and must fit properly. Safety goggles or glasses should be worn when doing tasks like sawing, drilling, or using compressed air to protect eyes from hazards. Dust masks or respirators should be worn when working in dusty or toxic areas depending on concentration. Gloves should be worn when handling materials with sharp edges or when chemicals are present. Hearing protection like ear plugs or muffs must be worn in noise levels over 90
Hand Protection.pptx
This document discusses hand protection and proper glove use. It notes that hands are commonly injured, with 20% of disabling workplace injuries involving hands, including cuts, burns and fractures. The document outlines different types of gloves, their purposes, and limitations. Proper glove selection and fit can protect hands from knives, chemicals, heat, electricity and other hazards, but gloves may also present hazards if not selected and used correctly. Care and replacement of damaged or ill-fitting gloves is also discussed.
Hand Protection.pptx
This document discusses hand protection and proper glove use. It notes that hands are commonly injured, with 20% of disabling workplace injuries involving hands. Different types of gloves protect against various hazards like cuts, chemicals, heat, and electricity. The document emphasizes properly selecting gloves for the specific hazard, and notes that gloves can have limitations and need proper fitting, care, cleaning and replacement when damaged.
SAFETY ENGINEERING- Personal Protective Equipment
This document discusses various safety roles and personal protective equipment. It describes security personnel who help detect safety hazards and assist engineers. It outlines the types of checks security can perform and various hazards they may encounter. The document then discusses different types of personal protective equipment including head, eye, face, hand, foot, body, hearing and respiratory protection. For each type of protective equipment, it identifies common hazards, provides examples, and describes appropriate equipment to use.
TPC Aug 2015 issue - 1st Half
The document discusses construction site safety and emphasizes the importance of taking safety seriously. It provides several examples of construction accidents that permanently changed peoples' lives. It then offers specific safety tips for different tasks like using fall protection equipment, wearing proper protective gear, inspecting tools for hazards, and following manufacturers' safety instructions. The goal is to prevent injuries and save lives by promoting a strong safety culture in the construction industry.
Why People Wear Protective Clothing
Protective clothing is worn in certain jobs to prevent injuries and save lives. Garments like steel-toed boots, overalls, gloves, masks, and hard hats protect those in construction, medical, science, and welding fields from dangers like falling objects, chemicals, fluids, sparks, and more. Employers provide these important items to their valuable employees as accidents could be prevented if proper protective gear is worn for the task. People should always prioritize protective clothing if their work poses life-threatening risks.
Welding
Welding is a common method of joining metals that involves fusing two pieces together. It carries several hazards including impact, penetration, harmful fumes and heat/light radiation. Welding is considered high risk, especially in operating plants, but risks can be reduced through various defenses including training, barriers, permits, communication, assessments, PPE, supervision and emergency preparedness. Proper PPE like welding helmets, gloves, aprons and leg covers are required to prevent burns from hot metal and radiation. Spark containment and protecting others is also important for safety.
Similar to Correct Glove for the Task (20)
Hand and Power Tools Safety and KYHS-LOF Refresher (1).pdf
Hand and Power Tools Safety and KYHS-LOF Refresher (1).pdf
More from Rudi Nieuwoudt
Line of fire safety
A short safety awareness session focussing on how to identify and prevent line of fire hazards and risks.
Alcohol and drug safety awareness
Drug and alcohol use pose significant health risks and social consequences. Worldwide in 2010, the average alcohol consumption was 6.2 liters per person over 15, which equals 13.5 grams of pure alcohol daily. That year, alcohol was attributable to around 3.3 million deaths globally or 5.9% of all deaths. Approximately 230 million people worldwide have used illicit drugs, with 15.3 million having drug use disorders. Drug use can negatively impact work performance through withdrawal symptoms, preoccupation with obtaining drugs, and illegal activities like drug sales to coworkers.
Monthly Environmental Inspection
This document outlines the requirements for a monthly environmental inspection at a construction site. It lists 12 compliance issues that are to be checked, including appointing contractors, safety training, personal protective equipment, health and safety, excavation and backfilling, dust control, water management, noise, storage and handling of hazardous substances, and waste management. For each compliance issue, the inspector notes whether the activity is acceptable or not, and includes evidence and details any responsible persons and completion dates for corrective actions. The goal of the inspection is to ensure all construction activities comply with environmental regulations and best practices.
Hand Tool Snapshots
This document provides safety guidance for using various hand tools, including hammers, sledgehammers, pickaxes, rakes, shovels, and hand saws. For each tool, it highlights potential hazards and recommends proper techniques to mitigate risks, such as inspecting tools for defects, using appropriate personal protective equipment, maintaining control of tools, and avoiding ergonomic stresses. The introduction notes some general safety measures that apply to all hand tools, like using task-specific PPE, proper storage, training, and pre-use inspections.
HSE HIRA Triggers
The document discusses Hazard Identification and Risk Assessment (HIRA) Trigger Boards used to improve the quality of Daily Safety Task Instructions (DSTIs) by prompting workers to consider potential hazards. The trigger boards listed common hazards to help engage workers in actively identifying hazards in their tasks rather than just recording instructions. Their use on one project led to clear improvements in the thoroughness of DSTI documentation. The boards provided can be adapted to different work activities.
Road Travel Safety
This document provides tips for safe road travel during the holiday season. It emphasizes the importance of planning and preparing your vehicle. You should conduct regular safety checks, understand how to respond to warning lights or signals, and know how to call for assistance if needed. In addition to ensuring your vehicle is roadworthy, you need to be well-rested, plan your route, avoid distractions, and pack an emergency kit. Proper preparation and awareness can help enhance safety and prevent problems when traveling on the road.
Managing Fatigue
Fatigue can be caused by work-related factors like long shifts, work demands, and environments, as well as outside factors like sleep loss, travel, and lifestyle. The effects of fatigue include slower reactions, forgetfulness, absent-mindedness, and lack of attention. Long-term fatigue can reduce coordination and lead to underestimating risks. Fatigue must be managed by employers and employees to prevent accidents and ensure workers are fit for duty.
Eye protection
Eye injuries on construction sites are mainly caused by not wearing eye protection or wearing the wrong type of protection. Common hazards that can injure eyes include dust, sparks, wires, and chemicals. The document provides examples of eye injuries from sparks and wire brushes that occurred because no eye protection was worn. It recommends wearing safety glasses for general work, goggles if working in dusty conditions, and both safety glasses and a face shield if grinding, cutting, or welding. Proper care and replacement of eye protection when scratched or damaged is also advised to protect workers' eyes.
Working at Hieght - Scaffold and Grating Platforms
Scaffold and grating platforms used for working at heights must have steel hook-on boards or grating tied down securely. Each platform requires toe-boards, guardrails, and safe access via ladder or staircase. Gaps are not allowed, and any removed grating requires a permit and barricades below. Working safely requires all tools tethered, platforms kept clear, work areas demarcated below, and no work during hazardous weather.
Working at Height - Safety Harness Inspection
Safety harnesses and lanyards limit falls but do not eliminate them, and are not a substitute for effective fall protection measures like guardrails on working platforms. Users must do pre-use inspections of harnesses and lanyards to identify any issues like cuts, breaks, or damage that could compromise safety. Special attention should be paid to webbing, buckles, D-rings, snap hooks, and any areas subjected to abrasion, chemicals, or heat when inspecting for signs of wear or potential failure.
Working at Height - Falling Objects
This document discusses the hazards of working at heights and falling objects. It provides facts about the speed and impact of solid objects when dropped from heights of 20m, 35m and 70m. Falling objects are a major hazard on construction sites and can cause serious injuries even from seemingly innocent dropped tools. To reduce the risk of falling objects, the document recommends securing loads and tools, maintaining good housekeeping, using physical barriers below work areas, monitoring control effectiveness, and using personal protective equipment.
Scaffold Inspections
Scaffold users have responsibilities to check scaffolds before use, as inspections are done by competent persons appointed by the erection company. Scaffolds must be inspected weekly, after erection or dismantling, after alterations, incidents, or inclement weather. Inspection tags provide information on the scaffold dimensions and components, erection team, and inspector, and must be displayed at access points with red "Do Not Use" tags for scaffolds requiring inspection.
Emergency Preparedness
This document discusses emergency preparedness and provides guidance on developing an emergency plan. It outlines key aspects to consider like having an emergency plot plan showing escape routes and assembly points. Emergency equipment needs to be available and inspected regularly. The document assigns emergency roles and responsibilities to employees, supervisors, emergency controllers and a safety officer. It stresses the importance of regular emergency drills to test effectiveness and identify areas for improvement. Drills should be treated as real emergencies and followed by a debriefing session and report.
More from Rudi Nieuwoudt (13)
Working at Hieght - Scaffold and Grating Platforms
Working at Hieght - Scaffold and Grating Platforms
Recently uploaded
Artificial Intelligence, Data and Competition – OECD – June 2024 OECD discussion
Artificial Intelligence, Data and Competition – OECD – June 2024 OECD discussionOECD Directorate for Financial and Enterprise Affairs
This presentation by OECD, OECD Secretariat, was made during the discussion “Artificial Intelligence, Data and Competition” held at the 143rd meeting of the OECD Competition Committee on 12 June 2024. More papers and presentations on the topic can be found at oe.cd/aicomp.
This presentation was uploaded with the author’s consent.
Mastering the Concepts Tested in the Databricks Certified Data Engineer Assoc...
• For a full set of 760+ questions. Go to
https://skillcertpro.com/product/databricks-certified-data-engineer-associate-exam-questions/
• SkillCertPro offers detailed explanations to each question which helps to understand the concepts better.
• It is recommended to score above 85% in SkillCertPro exams before attempting a real exam.
• SkillCertPro updates exam questions every 2 weeks.
• You will get life time access and life time free updates
• SkillCertPro assures 100% pass guarantee in first attempt.
Collapsing Narratives: Exploring Non-Linearity • a micro report by Rosie Wells
Insight: In a landscape where traditional narrative structures are giving way to fragmented and non-linear forms of storytelling, there lies immense potential for creativity and exploration.
'Collapsing Narratives: Exploring Non-Linearity' is a micro report from Rosie Wells.
Rosie Wells is an Arts & Cultural Strategist uniquely positioned at the intersection of grassroots and mainstream storytelling.
Their work is focused on developing meaningful and lasting connections that can drive social change.
Please download this presentation to enjoy the hyperlinks!
Artificial Intelligence, Data and Competition – LIM – June 2024 OECD discussion
Artificial Intelligence, Data and Competition – LIM – June 2024 OECD discussionOECD Directorate for Financial and Enterprise Affairs
This presentation by Yong Lim, Professor of Economic Law at Seoul National University School of Law, was made during the discussion “Artificial Intelligence, Data and Competition” held at the 143rd meeting of the OECD Competition Committee on 12 June 2024. More papers and presentations on the topic can be found at oe.cd/aicomp.
This presentation was uploaded with the author’s consent.
Competition and Regulation in Professions and Occupations – OECD – June 2024 ...
Competition and Regulation in Professions and Occupations – OECD – June 2024 ...OECD Directorate for Financial and Enterprise Affairs
This presentation by OECD, OECD Secretariat, was made during the discussion “Competition and Regulation in Professions and Occupations” held at the 77th meeting of the OECD Working Party No. 2 on Competition and Regulation on 10 June 2024. More papers and presentations on the topic can be found at oe.cd/crps.
This presentation was uploaded with the author’s consent.
Pro-competitive Industrial Policy – LANE – June 2024 OECD discussion
Pro-competitive Industrial Policy – LANE – June 2024 OECD discussionOECD Directorate for Financial and Enterprise Affairs
This presentation by Nathaniel Lane, Associate Professor in Economics at Oxford University, was made during the discussion “Pro-competitive Industrial Policy” held at the 143rd meeting of the OECD Competition Committee on 12 June 2024. More papers and presentations on the topic can be found at oe.cd/pcip.
This presentation was uploaded with the author’s consent.
Why Psychological Safety Matters for Software Teams - ACE 2024 - Ben Linders.pdf
Psychological safety in teams is important; team members must feel safe and able to communicate and collaborate effectively to deliver value. It’s also necessary to build long-lasting teams since things will happen and relationships will be strained.
But, how safe is a team? How can we determine if there are any factors that make the team unsafe or have an impact on the team’s culture?
In this mini-workshop, we’ll play games for psychological safety and team culture utilizing a deck of coaching cards, The Psychological Safety Cards. We will learn how to use gamification to gain a better understanding of what’s going on in teams. Individuals share what they have learned from working in teams, what has impacted the team’s safety and culture, and what has led to positive change.
Different game formats will be played in groups in parallel. Examples are an ice-breaker to get people talking about psychological safety, a constellation where people take positions about aspects of psychological safety in their team or organization, and collaborative card games where people work together to create an environment that fosters psychological safety.
原版制作贝德福特大学毕业证（bedfordhire毕业证）硕士文凭原版一模一样
原版一模一样【微信：741003700 】【贝德福特大学毕业证（bedfordhire毕业证）硕士文凭】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Artificial Intelligence, Data and Competition – ČORBA – June 2024 OECD discus...
Artificial Intelligence, Data and Competition – ČORBA – June 2024 OECD discus...OECD Directorate for Financial and Enterprise Affairs
This presentation by Juraj Čorba, Chair of OECD Working Party on Artificial Intelligence Governance (AIGO), was made during the discussion “Artificial Intelligence, Data and Competition” held at the 143rd meeting of the OECD Competition Committee on 12 June 2024. More papers and presentations on the topic can be found at oe.cd/aicomp.
This presentation was uploaded with the author’s consent.
Artificial Intelligence, Data and Competition – SCHREPEL – June 2024 OECD dis...
Artificial Intelligence, Data and Competition – SCHREPEL – June 2024 OECD dis...OECD Directorate for Financial and Enterprise Affairs
This presentation by Thibault Schrepel, Associate Professor of Law at Vrije Universiteit Amsterdam University, was made during the discussion “Artificial Intelligence, Data and Competition” held at the 143rd meeting of the OECD Competition Committee on 12 June 2024. More papers and presentations on the topic can be found at oe.cd/aicomp.
This presentation was uploaded with the author’s consent.
Tom tresser burning issue.pptx My Burning issue
Addressing the status of black home ownership in America. and what actions are taken to impact these trends.
Mẫu PPT kế hoạch làm việc sáng tạo cho nửa cuối năm PowerPoint
Mẫu PPT kế hoạch làm việc sáng tạo cho nửa cuối năm PowerPoint
ASONAM2023_presection_slide_track-recommendation.pdf
Presented at the 2023 IEEE/ACM International Conference on
Advances in Social Networks Analysis and Mining.
Suzanne Lagerweij - Influence Without Power - Why Empathy is Your Best Friend...
This is a workshop about communication and collaboration. We will experience how we can analyze the reasons for resistance to change (exercise 1) and practice how to improve our conversation style and be more in control and effective in the way we communicate (exercise 2).
This session will use Dave Gray’s Empathy Mapping, Argyris’ Ladder of Inference and The Four Rs from Agile Conversations (Squirrel and Fredrick).
Abstract:
Let’s talk about powerful conversations! We all know how to lead a constructive conversation, right? Then why is it so difficult to have those conversations with people at work, especially those in powerful positions that show resistance to change?
Learning to control and direct conversations takes understanding and practice.
We can combine our innate empathy with our analytical skills to gain a deeper understanding of complex situations at work. Join this session to learn how to prepare for difficult conversations and how to improve our agile conversations in order to be more influential without power. We will use Dave Gray’s Empathy Mapping, Argyris’ Ladder of Inference and The Four Rs from Agile Conversations (Squirrel and Fredrick).
In the session you will experience how preparing and reflecting on your conversation can help you be more influential at work. You will learn how to communicate more effectively with the people needed to achieve positive change. You will leave with a self-revised version of a difficult conversation and a practical model to use when you get back to work.
Come learn more on how to become a real influencer!
Pro-competitive Industrial Policy – OECD – June 2024 OECD discussion
Pro-competitive Industrial Policy – OECD – June 2024 OECD discussionOECD Directorate for Financial and Enterprise Affairs
This presentation by OECD, OECD Secretariat, was made during the discussion “Pro-competitive Industrial Policy” held at the 143rd meeting of the OECD Competition Committee on 12 June 2024. More papers and presentations on the topic can be found at oe.cd/pcip.
This presentation was uploaded with the author’s consent.
2024-05-30_meetup_devops_aix-marseille.pdf
Slides de notre meetup DevOps AixMarseille du 30 mai 2024 chez SmarTribune
Sujets: platform engineering / terragrunt / test containers
XP 2024 presentation: A New Look to Leadership
Presentation slides from XP2024 conference, Bolzano IT. The slides describe a new view to leadership and combines it with anthro-complexity (aka cynefin).
BRIC_2024_2024-06-06-11:30-haunschild_archival_version.pdf
These are the slides of my presentation at BRIC 2024 about global science overlay maps using OpenAlex.
Recently uploaded (20)
Artificial Intelligence, Data and Competition – OECD – June 2024 OECD discussion
Artificial Intelligence, Data and Competition – OECD – June 2024 OECD discussion
Mastering the Concepts Tested in the Databricks Certified Data Engineer Assoc...
Mastering the Concepts Tested in the Databricks Certified Data Engineer Assoc...
Collapsing Narratives: Exploring Non-Linearity • a micro report by Rosie Wells
Collapsing Narratives: Exploring Non-Linearity • a micro report by Rosie Wells
Artificial Intelligence, Data and Competition – LIM – June 2024 OECD discussion
Artificial Intelligence, Data and Competition – LIM – June 2024 OECD discussion
Competition and Regulation in Professions and Occupations – OECD – June 2024 ...
Competition and Regulation in Professions and Occupations – OECD – June 2024 ...
Pro-competitive Industrial Policy – LANE – June 2024 OECD discussion
Pro-competitive Industrial Policy – LANE – June 2024 OECD discussion
Why Psychological Safety Matters for Software Teams - ACE 2024 - Ben Linders.pdf
Why Psychological Safety Matters for Software Teams - ACE 2024 - Ben Linders.pdf
Artificial Intelligence, Data and Competition – ČORBA – June 2024 OECD discus...
Artificial Intelligence, Data and Competition – ČORBA – June 2024 OECD discus...
Artificial Intelligence, Data and Competition – SCHREPEL – June 2024 OECD dis...
Artificial Intelligence, Data and Competition – SCHREPEL – June 2024 OECD dis...
Mẫu PPT kế hoạch làm việc sáng tạo cho nửa cuối năm PowerPoint
Mẫu PPT kế hoạch làm việc sáng tạo cho nửa cuối năm PowerPoint
ASONAM2023_presection_slide_track-recommendation.pdf
ASONAM2023_presection_slide_track-recommendation.pdf
Suzanne Lagerweij - Influence Without Power - Why Empathy is Your Best Friend...
Suzanne Lagerweij - Influence Without Power - Why Empathy is Your Best Friend...
Pro-competitive Industrial Policy – OECD – June 2024 OECD discussion
Pro-competitive Industrial Policy – OECD – June 2024 OECD discussion
BRIC_2024_2024-06-06-11:30-haunschild_archival_version.pdf
BRIC_2024_2024-06-06-11:30-haunschild_archival_version.pdf
Correct Glove for the Task
- 1. Toolbox Talk Correct Glove for the Task Compiled by Rudi Nieuwoudt
- 2. 2 The Correct Glove for the job On construction sites we have many tasks including carrying scaffold material, pulling cables, electrical instrumentation work, painting etc. Each and every task holds its own unique risks for hand injuries and that is why it is extremely important to use the correct glove for the job. Lets take a look at the different types of gloves you are likely to come across on most construction sites… Knowing what glove to use will be determined by the risk assessment that was conducted for the work you need to do. Make sure that you are aware of the requirements as set out in the risk assessment. And remember…if you are unsure…ASK!!
- 3. 3 Welding Gloves Welding gloves are very thick with long cuffs. They are padded on the inside to protect the user against the heat generated by welding and also against sparks or welding flux that would burn through thinner gloves. The Correct Glove for the job PVC Gloves These gloves are used for tasks where you work with chemicals or flammable liquids. They protect your hand by preventing chemicals coming into contact with your skin. Tasks where you would use PVC gloves include; • Concrete floating • Applying shutter oil to shutters • Painting • Refueling of generators. Think of any task where you are using chemicals or flammable liquids. Leather gloves will not protect you because the leather soaks up liquids and this could burn your skin.
- 4. 4 Leather Gloves/General Worker Gloves These gloves are used for tasks where you handle large objects. Think of tasks where there are pinch points, sharp or rough edges. We would use these gloves for tasks like; • Carrying Scaffold material. • Scaffold Erection • Carrying shutters or rebar. • Steel Fixing • Cable pulling. • Bolt-ups • Or carrying any heavy objects. The Correct Glove for the job Electrician Gloves These gloves are mostly used by electricians because they enable you to handle small objects like wires or small screws. THESE GLOVES MAY NOT BE USED FOR LIFTING HEAVY OBJECTS OR FOR ANY HOTWORK LIKE GRINDING OR WELDING!!
- 5. 5 The Correct Glove for the job The most important piece PPE you will ever own is your mind. Make the decision today and work safely not only for yourself, but for your family as well. If you don’t make the decision to work safely, no Risk Assessment, Safe Work Procedure, JSA, Method Statement or Task Instruction will help you.