The RING WIRE OPENER is a compact, handheld device that easily opens wire or spiral bindings without damaging paper. It can open bindings from 6.9-25.4mm in diameter at a rate of up to 360 books per hour. The device simply slides along the wire seam to remove the binding without tools or effort. Additional sheets can then be inserted to rebind the document with a new wire or element.

1. OFFICE LINE
RING WIRE OPENER
Reliable and easy hand wire opening device for all RENZ RING
WIRE® or any wire bound documents.
Customer benefits:
Open 3:1 or 2:1 binding wires easily without
damaging the paper of the bound product
Any length possible
Compact design
Output:
Max. opened
products per hour
360
All performance outputs are based on 80 gsm paper
and may vary depending on the product type, the
working environment and the operator.

2. Place the document on desk Position the nose of the RING Slide the device all the way Now you can easily remove
with the wire seam showing. WIRE OPENER into the wire along the wire seam. the opened binding wire.
seam.
If any additional pre punched
sheets are required they can
now be added and re bound
using a new colour or bin-
ding element.
Technical data: RING WIRE OPENER
Pitch: 3:1 & 2:1
Binding element Ø:
6.9 - 25.4 mm
1/4“ - 1“
Min. binding width: 10 mm
Max. binding width: 420 mm
No. of books output per hr: 360
Dimensions L x W x H: 240 x 15 x 95 mm
Weight: 0.10 kg
Packaging dimensions L x W x H: 260 x 30 x 120 mm
Weight with packaging: 0.14 kg
Power requirement: -
Technical modifications may be
made without notice.
1 mm = 10 sheets of paper, based on 80 gsm.
All performance outputs are based on 80 gsm paper and may vary depending on For further information and videos
the product type, the working environment and the operator. please visit:
Binding Outlet
www.bindingoutlet.uk
Product code: 49480200125 (v2)