2. • I opened up Quark and
started a new project.
• I kept the page layout as
A4 but changed the
column amount to 3.
• This enabled me to have
3 equal columns for my
contents page
I changed this to 3
3. • This was the starting point to my contents page
• 3 equal columns
4. • I added a shape all the way around my page.
• I used the colour codes from my front cover to
use as the colour for my contents page. This was
because I wanted to keep the same colour
scheme.
5. • I added a main title by using the text box
tool.
• I kept the same font as my front cover
(Goudy Stout) but changed the colour to
black.
6. • I added the magazine title by using the text box tool.
• I put this underneath the ‘Contents’ title and made it
smaller so that it didn’t draw attention away from the
contents.
• I used the same colour scheme as my front cover
masthead by using certain colour codes.
7. • I used the shape tool to draw two boxes in the two side columns,
making sure they were of equal width but not length.
• I used the margin guidelines to do this.
• I then filled them in with a solid white colour.
8. • I added two text boxes to
the right hand column;
within the white area.
• I filled the top box with a
feature article title and
information; to go under a
image.
• I filled the bottom box
with regular content.
• I kept the same font
(Goudy Stout and Kalinga)
and colour scheme as my
front cover text.
9. • I also added a text box to the left hand column,
covering the majority of the white area.
• I also kept the same colour scheme and font in
this column as I did on the right and front cover.
10. • I used the thin strips of column as a guide for
my page numbers.
• I used Kalinga font but made it bold and a size
12.
11. • I added two rectangle shapes to my page
number columns, starting at the top of the
white areas and going down to the bottom.
• I filled them in with the new colour I had
created from my college title.
12. • I used the shape tool to create a box underneath the white area
in the right hand column.
• This will later be used to hold text.
• I kept the same colour fill as my page numbers so that it carried
on from that section.
13. • I added text to this box by using the text tool.
• I used the font Kalinga and used the colour
codes from my front cover.
14. • I added all of
these images by
using the image
tool
• I drew out the
image box for
each one, right
clicked and
selected
‘import’.
• I then chose the
appropriate
images.