Consumer Electronics PPT
•Download as PPTX, PDF•
2 likes•2,725 views
This document lists various countries including India, Dubai, Canada, and Australia with India mentioned the most. Consumer durables are also referenced but no other context is provided.
Report
Share
Report
Share
Recommended
Losses in optical fiber
Losses in optical fibers include attenuation from absorption and scattering, as well as dispersion effects. Attenuation is caused by absorption of light energy through heating of impurities in the fiber, resulting in a loss of optical power over length. Dispersion causes pulse broadening and occurs from intermodal and intramodal effects such as material and waveguide dispersion. An optical time domain reflectometer (OTDR) can be used to detect faults, splices, and bends in fibers by emitting light pulses and measuring backscattered light over time to map reflections in the fiber.
Arduino traffic lights
This document provides code for creating a basic traffic light system using an Arduino Uno board. It defines pin assignments for the red, yellow, and green LEDs. The setup function initializes the pins as outputs. The loop function calls changeLights every 15 seconds. ChangeLights turns the lights on and off in sequence: green off and yellow on for 3 seconds, yellow off and red on for 5 seconds, red and yellow on for 2 seconds, then red and yellow off with green on.
Micro controller based Traffic control system
This project deals with traffic system controlled by a microcontroller.
using IR controllers instead of using old timing circuits.
This system aims to provide much better and safer way of controlling Traffic signal system.
This system of controlling will help a lot in future.
Distance Measurement by Ultrasonic Sensor
It is designed to measure the distance of any object by using an ultrasonic transducer. Ultrasonic means of distance measurement is a convenient method compared to traditional one using measurement scales.This kind of measurement is particularly applicable to inaccessible areas where traditional means cannot be implemented such as high temperature, pressure zones etc.
RFID and IR Based Attendance System
This document describes an RFID and IR based attendance system project. It includes the aim, block diagram, circuit diagram of RFID, working of the circuit, applications of RFID, and results and conclusions from developing and testing the system. An RFID reader module controlled by a microcontroller reads RFID tags when an IR sensor first detects a person's presence. The system allows for automated attendance tracking to reduce paper records and store data longer term. Future scopes involve enhancing the range and data transfer capabilities.
Automatic railway gate control using arduino uno
This document describes an automatic railway gate control system using Arduino Uno. The system uses IR sensors to detect the arrival and departure of trains. When a train is detected, the system closes the railway gate automatically using servo or DC motors controlled by the Arduino. Buzzers notify people trying to cross the gate that it is closing. The system aims to prevent accidents at unmanned railway crossings by automating gate operation instead of manual control. The hardware components include an Arduino Uno, IR sensors, motors, buzzers and more. The system is programmed using Arduino C code.
Virtual instrumentation
Presentation consist on Virtual Instrumentation with the minor knowledge on Lab View and what are these
LED Display
An LED display uses an array of light-emitting diodes (LEDs) as pixels to provide a video display. LED displays are bright, making them suitable for outdoor signs and billboards. The largest LED display in the world is located on the Fremont Street Experience in Las Vegas, measuring 1,500 feet long. LED displays have replaced CRT displays and provide thinner, more energy efficient screens. Future innovations include rollable OLED displays, transparent screens, and holograms.
Recommended
Losses in optical fiber
Losses in optical fibers include attenuation from absorption and scattering, as well as dispersion effects. Attenuation is caused by absorption of light energy through heating of impurities in the fiber, resulting in a loss of optical power over length. Dispersion causes pulse broadening and occurs from intermodal and intramodal effects such as material and waveguide dispersion. An optical time domain reflectometer (OTDR) can be used to detect faults, splices, and bends in fibers by emitting light pulses and measuring backscattered light over time to map reflections in the fiber.
Arduino traffic lights
This document provides code for creating a basic traffic light system using an Arduino Uno board. It defines pin assignments for the red, yellow, and green LEDs. The setup function initializes the pins as outputs. The loop function calls changeLights every 15 seconds. ChangeLights turns the lights on and off in sequence: green off and yellow on for 3 seconds, yellow off and red on for 5 seconds, red and yellow on for 2 seconds, then red and yellow off with green on.
Micro controller based Traffic control system
This project deals with traffic system controlled by a microcontroller.
using IR controllers instead of using old timing circuits.
This system aims to provide much better and safer way of controlling Traffic signal system.
This system of controlling will help a lot in future.
Distance Measurement by Ultrasonic Sensor
It is designed to measure the distance of any object by using an ultrasonic transducer. Ultrasonic means of distance measurement is a convenient method compared to traditional one using measurement scales.This kind of measurement is particularly applicable to inaccessible areas where traditional means cannot be implemented such as high temperature, pressure zones etc.
RFID and IR Based Attendance System
This document describes an RFID and IR based attendance system project. It includes the aim, block diagram, circuit diagram of RFID, working of the circuit, applications of RFID, and results and conclusions from developing and testing the system. An RFID reader module controlled by a microcontroller reads RFID tags when an IR sensor first detects a person's presence. The system allows for automated attendance tracking to reduce paper records and store data longer term. Future scopes involve enhancing the range and data transfer capabilities.
Automatic railway gate control using arduino uno
This document describes an automatic railway gate control system using Arduino Uno. The system uses IR sensors to detect the arrival and departure of trains. When a train is detected, the system closes the railway gate automatically using servo or DC motors controlled by the Arduino. Buzzers notify people trying to cross the gate that it is closing. The system aims to prevent accidents at unmanned railway crossings by automating gate operation instead of manual control. The hardware components include an Arduino Uno, IR sensors, motors, buzzers and more. The system is programmed using Arduino C code.
Virtual instrumentation
Presentation consist on Virtual Instrumentation with the minor knowledge on Lab View and what are these
LED Display
An LED display uses an array of light-emitting diodes (LEDs) as pixels to provide a video display. LED displays are bright, making them suitable for outdoor signs and billboards. The largest LED display in the world is located on the Fremont Street Experience in Las Vegas, measuring 1,500 feet long. LED displays have replaced CRT displays and provide thinner, more energy efficient screens. Future innovations include rollable OLED displays, transparent screens, and holograms.
Bluetooth Controlled Robot
The document describes a project to create a robot that is controlled by an Android application using Bluetooth connectivity. A group of five students created the robot under the guidance of a project guide. The robot uses a microcontroller and Bluetooth module to receive commands from an Android phone app and control two DC motors. The goal is to allow remote control of the robot's movement in four directions using an Android phone as a wireless remote control via Bluetooth.
Seminar on direct to home
DTH (Direct to Home) technology involves transmitting satellite programming directly to small dish antennas at individual homes. It does not require a local cable operator and allows broadcasters to connect directly with consumers. DTH systems consist of an uplink antenna, satellite, minidish antenna, low noise block down converter, and set top box. DTH offers better picture quality than cable TV since the signal travels directly from satellite to user without passing through coaxial cables. DTH has expanded television access to both urban and rural areas in India.
Lcd & led tv technologies
This document compares and contrasts LCD and LED display technologies. It discusses the basic principles of liquid crystals and how they enable LCD displays. It describes the different types of LCDs including passive matrix and active matrix. It then discusses LED display technology, including the types of LED driving and different LED displays. It provides the advantages and disadvantages of both LCD and LED as well as common applications for each type of display technology. Finally, it summarizes the key differences between LCD and LED displays.
Automatic room light controller with bi directional visitor counter using Ard...
This Project Has Two Modules.
First module is '' Visitor Counter " and The Other Module is " Automatic Room Light Controller ".
Density based trafiic control
This document describes a density based traffic control system that uses sensors and a microcontroller to dynamically control traffic lights based on vehicle density. Sensors placed on roads measure traffic and transmit values to a microcontroller. As traffic increases on a road, the values change and the microcontroller prioritizes that road's traffic light to allow traffic to flow more efficiently. The system aims to reduce traffic congestion through adaptive, density-based traffic light timing.
Ec8791 lpc2148
Introduction to LPC2148, Features of LPC 2148, LPC2148 Architecture, LPC 2148 Peripherals, LPC2148 Pin description
9 d55201 testing & testability
This document outlines topics related to testing and testability for an M.Tech examination. It lists eight questions, with each question having two parts (a) and (b). The questions cover topics such as modeling digital circuits, delay models, fault models, ATPG for sequential circuits, scan architectures, boundary scan testing, DFT approaches, signature analysis, self-test design, memory testing, JTAG testing features, hazard detection, and RTS. Students must answer any five questions by explaining the related concepts in detail.
Third Eye for blind.pptx
This document describes a voice-based alert system for blind people that uses UV sensors to detect obstacles. The system includes a Cortex M3 microcontroller, IR sensors, a voice circuit, and buzzer. It aims to provide low-cost, low-power obstacle detection and voice alerts to guide blind users. The proposed model improves on previous versions by using a more advanced microcontroller and additional sensors like motion sensors. Potential applications include security systems, interactive exhibits, parking assistance, and robot navigation.
Traffic light controller
My new upload !!! --> http://www.slideshare.net/choleraparth91/smart-vehicle-ensuring-safe-ride-using-accerolometer-laser-sensor-co-sensor-and-also-with-use-of-gsm-modem-and-solar-panel
Contact & follow me to get PDF & PPT file - https://www.linkedin.com/in/parthcholera/
Email me directly if you want these file !!
choleraparth91@yahoo.com
or
contact me on fb - https://www.facebook.com/choleraparth91
or
https://www.facebook.com/Textivity
or
message me on - 08097508067
I suggest to go for these project !!! :D :D
Ece interview questions with answers
The document discusses various topics related to mobile communication systems:
1. Different categories of antennas and examples of each including wire antennas, microstrip antennas, reflector antennas, travelling wave antennas, and aperture antennas.
2. Types of handover in mobile networks - hard handoff and soft handoff.
3. Ionospheric bending which is the phenomenon of radio wave refraction in the ionospheric layer causing the waves to bend.
IR Remote Control
Infrared remote controls were first developed in the late 1970s and use infrared light and photo receptors to send signals from the remote to electronic devices. They allow control of TVs, radios, DVD players, and other devices by sending different infrared light frequencies for different functions. Now infrared remotes can control many devices at once and have become common due to problems with earlier remote control technologies that required direct line of sight or could be affected by outside interference. Infrared remotes are used for entertainment, industrial applications, and military purposes like missile guidance.
Smart shopping trolley.
Smart Shopping trolley, complete detail about smart shopping trolley system,
Basically this is based on RFID technology,
Components
Arduino nano
RFID reader EM 18
RFID Tags
Push button
Red and Green LED
BreadBoard
Jumper wires
Buzzer
16x2 LCD
I2C Module.
Microwave Phase shifter
The document discusses different types of microwave phase shifters. It describes that a phase shifter is a two-port device that provides a fixed or variable phase shift of an RF signal with minimal attenuation. It then focuses on ferrite phase shifters, which use ferrite materials to provide a variable phase shift by changing the bias field of the ferrite. The document also discusses distributed phase shifters, active vs. passive phase shifters, analog vs. digital phase shifters, and fixed vs. variable phase shifters.
Wireless E-Notice Board Using Bluetooth Report.docx
This document describes the design of a wireless electronic notice board. It uses an Arduino Uno microcontroller connected to an LCD display and Bluetooth module. An Android application on a smartphone can send text messages to the Bluetooth module, which the Arduino then displays on the LCD. This allows notices to be updated in real-time wirelessly, replacing the need for physical paper notices on a traditional notice board.
Ultra wide band antenna
Ultra-wideband (UWB) antennas must transmit very short pulse signals accurately and efficiently. The document discusses various types of UWB antennas including traveling-wave antennas like horn antennas, frequency-independent antennas whose radiation patterns do not change with frequency, self-complementary antennas with constant input impedance regardless of frequency or shape, multiple resonance antennas made of multiple narrowband elements, and electrically small antennas. Key antenna characterization parameters in time and frequency domains are also presented.
RFID based smart shopping cart and billing system
To make the shopping easy by automated billing at the shopping mall/ super maeket. This module mainly cocnsists of Arduino, RFID tags & reader and zigbee module.
Broadside array vs end fire array
Broadside Array vs end-fire array
Higher directivity.
Provide increased directivity in
elevation and azimuth planes.
Generally used for reception.
Impedance match difficulty in
high power transmissions.
Variants are:
Horizontal Array of Dipoles
RCA Fishborne Antenna
Series Phase Array
Radar Using Arduino
Rader is an object detection system. It uses Microwaves to determine the range, altitude, direction, or speed of objects. The radar can transmit radio waves or microwaves which bounce off any object in their path. So, we can easily determine any object in the radar range. Adruino is a single-board microcontroller to make electronics more discipline. The radar system has different performance specifications and also it comes in a verity of size.
An Arduino radar project is more than a visual project because of its circuit implementation. There are different hardware use to accomplish the Arduino Radar Sensor. Like as, Arduino UNO. HC-SRo4 Ultrasonic Sensor including a Servo Motor. The main appearance is the visual narration in the Processing Application.
It is very simple, the Ultrasonic Sensor collects the object information with the help of Arduino and passes it to Processing Application. In the processing application, there is a simple Graphics application implemented which mimic a radar screen.
Software defined radio
This document discusses software defined radio (SDR) technology. SDR uses software modules running on generic hardware like DSPs and microprocessors to implement radio functions rather than using dedicated hardware components. This allows radios to have their functionality redefined or upgraded through changes to its software. The document outlines the architecture of SDR systems and provides examples of SDR applications in areas like public safety, military uses, and commercial devices. It also discusses benefits such as flexibility and interoperability as well as challenges related to hardware limitations and software complexity. The future scope of SDR is seen to include adaptive radios and cognitive radios that can dynamically change their transmission behavior.
SoC Design
This document provides an overview of system on chip (SoC) design. It discusses that a SoC integrates all components of an electronic system onto a single chip, and that SoC design involves identifying user needs and integrating various intellectual property blocks. The document then covers SoC fundamentals like the use of soft and hard IP cores, the design flow from specification to fabrication, and strategies for addressing SoC complexity through partitioning, abstraction levels, and reuse of pre-designed components.
Consumer electronics final, jkc
The document summarizes key findings from a BlogHer study on consumer electronics. It found that communication and entertainment devices are most indispensable. Women prefer online reviews when researching purchases and are more likely to use blogs than social media for purchase advice. Younger adults and minorities are heavy mobile users and turn to their phones for purchase help. Price is a top concern for most groups.
Consumer Electronics in India - An Analysis
This document provides an overview of the consumer electronics industry in India. It defines consumer electronics as brown goods, which include traditional audio/video equipment, computers, mobile phones, and related devices. The document notes that the Indian consumer electronics market was worth $22 billion in 2008 and is predicted to reach $46 billion by 2013, representing a compound annual growth rate of 16%. It provides market share information for different segments and discusses trends in computers, audio/video devices, mobile phones, and key drivers of growth in the Indian consumer electronics industry.
More Related Content
What's hot
Bluetooth Controlled Robot
The document describes a project to create a robot that is controlled by an Android application using Bluetooth connectivity. A group of five students created the robot under the guidance of a project guide. The robot uses a microcontroller and Bluetooth module to receive commands from an Android phone app and control two DC motors. The goal is to allow remote control of the robot's movement in four directions using an Android phone as a wireless remote control via Bluetooth.
Seminar on direct to home
DTH (Direct to Home) technology involves transmitting satellite programming directly to small dish antennas at individual homes. It does not require a local cable operator and allows broadcasters to connect directly with consumers. DTH systems consist of an uplink antenna, satellite, minidish antenna, low noise block down converter, and set top box. DTH offers better picture quality than cable TV since the signal travels directly from satellite to user without passing through coaxial cables. DTH has expanded television access to both urban and rural areas in India.
Lcd & led tv technologies
This document compares and contrasts LCD and LED display technologies. It discusses the basic principles of liquid crystals and how they enable LCD displays. It describes the different types of LCDs including passive matrix and active matrix. It then discusses LED display technology, including the types of LED driving and different LED displays. It provides the advantages and disadvantages of both LCD and LED as well as common applications for each type of display technology. Finally, it summarizes the key differences between LCD and LED displays.
Automatic room light controller with bi directional visitor counter using Ard...
This Project Has Two Modules.
First module is '' Visitor Counter " and The Other Module is " Automatic Room Light Controller ".
Density based trafiic control
This document describes a density based traffic control system that uses sensors and a microcontroller to dynamically control traffic lights based on vehicle density. Sensors placed on roads measure traffic and transmit values to a microcontroller. As traffic increases on a road, the values change and the microcontroller prioritizes that road's traffic light to allow traffic to flow more efficiently. The system aims to reduce traffic congestion through adaptive, density-based traffic light timing.
Ec8791 lpc2148
Introduction to LPC2148, Features of LPC 2148, LPC2148 Architecture, LPC 2148 Peripherals, LPC2148 Pin description
9 d55201 testing & testability
This document outlines topics related to testing and testability for an M.Tech examination. It lists eight questions, with each question having two parts (a) and (b). The questions cover topics such as modeling digital circuits, delay models, fault models, ATPG for sequential circuits, scan architectures, boundary scan testing, DFT approaches, signature analysis, self-test design, memory testing, JTAG testing features, hazard detection, and RTS. Students must answer any five questions by explaining the related concepts in detail.
Third Eye for blind.pptx
This document describes a voice-based alert system for blind people that uses UV sensors to detect obstacles. The system includes a Cortex M3 microcontroller, IR sensors, a voice circuit, and buzzer. It aims to provide low-cost, low-power obstacle detection and voice alerts to guide blind users. The proposed model improves on previous versions by using a more advanced microcontroller and additional sensors like motion sensors. Potential applications include security systems, interactive exhibits, parking assistance, and robot navigation.
Traffic light controller
My new upload !!! --> http://www.slideshare.net/choleraparth91/smart-vehicle-ensuring-safe-ride-using-accerolometer-laser-sensor-co-sensor-and-also-with-use-of-gsm-modem-and-solar-panel
Contact & follow me to get PDF & PPT file - https://www.linkedin.com/in/parthcholera/
Email me directly if you want these file !!
choleraparth91@yahoo.com
or
contact me on fb - https://www.facebook.com/choleraparth91
or
https://www.facebook.com/Textivity
or
message me on - 08097508067
I suggest to go for these project !!! :D :D
Ece interview questions with answers
The document discusses various topics related to mobile communication systems:
1. Different categories of antennas and examples of each including wire antennas, microstrip antennas, reflector antennas, travelling wave antennas, and aperture antennas.
2. Types of handover in mobile networks - hard handoff and soft handoff.
3. Ionospheric bending which is the phenomenon of radio wave refraction in the ionospheric layer causing the waves to bend.
IR Remote Control
Infrared remote controls were first developed in the late 1970s and use infrared light and photo receptors to send signals from the remote to electronic devices. They allow control of TVs, radios, DVD players, and other devices by sending different infrared light frequencies for different functions. Now infrared remotes can control many devices at once and have become common due to problems with earlier remote control technologies that required direct line of sight or could be affected by outside interference. Infrared remotes are used for entertainment, industrial applications, and military purposes like missile guidance.
Smart shopping trolley.
Smart Shopping trolley, complete detail about smart shopping trolley system,
Basically this is based on RFID technology,
Components
Arduino nano
RFID reader EM 18
RFID Tags
Push button
Red and Green LED
BreadBoard
Jumper wires
Buzzer
16x2 LCD
I2C Module.
Microwave Phase shifter
The document discusses different types of microwave phase shifters. It describes that a phase shifter is a two-port device that provides a fixed or variable phase shift of an RF signal with minimal attenuation. It then focuses on ferrite phase shifters, which use ferrite materials to provide a variable phase shift by changing the bias field of the ferrite. The document also discusses distributed phase shifters, active vs. passive phase shifters, analog vs. digital phase shifters, and fixed vs. variable phase shifters.
Wireless E-Notice Board Using Bluetooth Report.docx
This document describes the design of a wireless electronic notice board. It uses an Arduino Uno microcontroller connected to an LCD display and Bluetooth module. An Android application on a smartphone can send text messages to the Bluetooth module, which the Arduino then displays on the LCD. This allows notices to be updated in real-time wirelessly, replacing the need for physical paper notices on a traditional notice board.
Ultra wide band antenna
Ultra-wideband (UWB) antennas must transmit very short pulse signals accurately and efficiently. The document discusses various types of UWB antennas including traveling-wave antennas like horn antennas, frequency-independent antennas whose radiation patterns do not change with frequency, self-complementary antennas with constant input impedance regardless of frequency or shape, multiple resonance antennas made of multiple narrowband elements, and electrically small antennas. Key antenna characterization parameters in time and frequency domains are also presented.
RFID based smart shopping cart and billing system
To make the shopping easy by automated billing at the shopping mall/ super maeket. This module mainly cocnsists of Arduino, RFID tags & reader and zigbee module.
Broadside array vs end fire array
Broadside Array vs end-fire array
Higher directivity.
Provide increased directivity in
elevation and azimuth planes.
Generally used for reception.
Impedance match difficulty in
high power transmissions.
Variants are:
Horizontal Array of Dipoles
RCA Fishborne Antenna
Series Phase Array
Radar Using Arduino
Rader is an object detection system. It uses Microwaves to determine the range, altitude, direction, or speed of objects. The radar can transmit radio waves or microwaves which bounce off any object in their path. So, we can easily determine any object in the radar range. Adruino is a single-board microcontroller to make electronics more discipline. The radar system has different performance specifications and also it comes in a verity of size.
An Arduino radar project is more than a visual project because of its circuit implementation. There are different hardware use to accomplish the Arduino Radar Sensor. Like as, Arduino UNO. HC-SRo4 Ultrasonic Sensor including a Servo Motor. The main appearance is the visual narration in the Processing Application.
It is very simple, the Ultrasonic Sensor collects the object information with the help of Arduino and passes it to Processing Application. In the processing application, there is a simple Graphics application implemented which mimic a radar screen.
Software defined radio
This document discusses software defined radio (SDR) technology. SDR uses software modules running on generic hardware like DSPs and microprocessors to implement radio functions rather than using dedicated hardware components. This allows radios to have their functionality redefined or upgraded through changes to its software. The document outlines the architecture of SDR systems and provides examples of SDR applications in areas like public safety, military uses, and commercial devices. It also discusses benefits such as flexibility and interoperability as well as challenges related to hardware limitations and software complexity. The future scope of SDR is seen to include adaptive radios and cognitive radios that can dynamically change their transmission behavior.
SoC Design
This document provides an overview of system on chip (SoC) design. It discusses that a SoC integrates all components of an electronic system onto a single chip, and that SoC design involves identifying user needs and integrating various intellectual property blocks. The document then covers SoC fundamentals like the use of soft and hard IP cores, the design flow from specification to fabrication, and strategies for addressing SoC complexity through partitioning, abstraction levels, and reuse of pre-designed components.
What's hot (20)
Automatic room light controller with bi directional visitor counter using Ard...
Automatic room light controller with bi directional visitor counter using Ard...
Wireless E-Notice Board Using Bluetooth Report.docx
Wireless E-Notice Board Using Bluetooth Report.docx
Viewers also liked
Consumer electronics final, jkc
The document summarizes key findings from a BlogHer study on consumer electronics. It found that communication and entertainment devices are most indispensable. Women prefer online reviews when researching purchases and are more likely to use blogs than social media for purchase advice. Younger adults and minorities are heavy mobile users and turn to their phones for purchase help. Price is a top concern for most groups.
Consumer Electronics in India - An Analysis
This document provides an overview of the consumer electronics industry in India. It defines consumer electronics as brown goods, which include traditional audio/video equipment, computers, mobile phones, and related devices. The document notes that the Indian consumer electronics market was worth $22 billion in 2008 and is predicted to reach $46 billion by 2013, representing a compound annual growth rate of 16%. It provides market share information for different segments and discusses trends in computers, audio/video devices, mobile phones, and key drivers of growth in the Indian consumer electronics industry.
Electronics industry
The document provides an overview of the electronics industry in India. It discusses the evolution of the industry from the early 1900s to the present day, with key developments including the rise of consumer electronics in the 1970s and growth of the industry in India starting in the 1960s. Major players in the Indian market are outlined like Sony, Toshiba, Samsung, Apple, and Nokia. The current state of the computer, audio/video, and mobile phone sectors in India are then summarized with projections for continued growth in the coming years.
Presentation on electronics industry
The document discusses the electronics industry, including its evolution from radios and televisions to modern devices like computers and semiconductors. It notes that the industry began in the early 1900s and expanded significantly in the 1960s with analog devices and further in the 1970s with consumer electronics. For India specifically, the electronics industry took off in the 1960s and has grown to $32 billion currently, though it still only constitutes 0.7% of the global market. The market is expected to continue growing significantly in the coming years.
B Plan On Consumer Electronics
The document discusses the consumer electronics industry globally and in India. It provides an overview of key players, trends, opportunities and challenges in the industry. It then discusses a potential business model and marketing strategy for an electronics retail store in India, including target customer segments, differentiation strategies, and the marketing mix.
Analysis of Electronics Sector in India
The electronics sector in India has grown rapidly since the late 1980s with increasing private investment. It contributes significantly to the economy and employment. Major companies include LG, Sony, and Samsung. The sector faces moderate rivalry among firms. Changing lifestyles and increasing incomes are driving growth in the sector. Companies are shifting to more customer-oriented demand forecasting models to better understand market trends. The sector has immense potential for further expansion.
Electronics industry
Electronics Industry,CEERI,IIT Delhi,DEAL,CEL,DLRL,BEL,NIT,Prime Minister Rajeev Gandhi,Dr Udai Pareek,Theory plus Practice,Learning by Doing
Business plan presentation
The document is a business plan presentation for Samsung that provides an overview of the company's history and operations. It summarizes that Samsung was founded in 1938 and initially traded goods before expanding into various industries such as electronics in 1969. Today, Samsung Electronics is a leading global electronics company headquartered in South Korea with products including semiconductors, mobile phones, TVs, and home appliances. The presentation outlines Samsung's vision to inspire the world through innovation and introduces the company's key products, markets, management team, and subsidiaries.
Consumer Electronics Show 2015 - The Final Word
The International CES is an annual trade show held in Las Vegas that brings together over 3,600 exhibitors from the consumer technology industry. It serves as a proving ground for innovators to introduce new technologies to over 150,000 attendees from over 140 countries. Now in its 40th year, CES covers innovations in hardware, content, delivery systems, and more.
Business Plan
This document provides a business plan for a Dosa restaurant. It outlines objectives to keep food costs below 35% of revenue and expand marketing. The plan details the restaurant's mission to provide excellent food and service. It will feature indoor and outdoor seating with a unique Indian design. The menu will focus on dosas and other South Indian cuisine. The plan analyzes the target market and identifies competitors. It proposes strategies for marketing, sales, management, hiring staff, and financial projections.
Basic hand tools (Electronics Technology)
The document discusses various basic hand tools used in electronics servicing. It describes screwdrivers like slotted and Phillips screwdrivers. Soldering tools discussed include soldering irons, soldering tool stands, and desoldering tools. Boring tools mentioned are mini-drills and portable electric drills. Cutting tools include utility knives and hacksaws. Auxiliary tools discussed are magnifying glasses and paint brushes. Electrical equipment defined are volt-ohm-milliammeters, oscilloscopes, and signal generators. The document concludes by asking the reader to classify different hand tools according to their specification.
Sample Business Proposal Presentation
The Unify Company is a new centralized web development company in the Caraga Region of the Philippines. It is led by CEO Ferdinand Balbin and aims to create a website that promotes tourism and allows local businesses to advertise their products and services. This centralized portal will help overcome the challenges of individual business websites having low visibility. The company works with the Department of Tourism to distribute promotional materials and hopes to generate revenue through business subscriptions to the website.
Knowledge and Technology Transfer Office (KTTO) - By Sebastian Jimenez (Innov...
Presentation related with the Knowledge and Techonology Transfer Office of the CIBICAN. presented by Sebstian Jiménez. October 13, 2015. The Office was created thanks to the support to the European Project IMBRAIN
Intellectual Property Rights
This document discusses the role of intellectual property in economic growth. It argues that innovation drives national economic growth, and that intellectual property protection encourages innovation. It notes that developed countries now have knowledge-based economies that rely heavily on intellectual property, while developing countries still rely on primary industries. The document also acknowledges that very strong intellectual property protections could inhibit growth in poor countries by limiting knowledge sharing. Overall, it presents India as an example of a country that has benefited from a balanced intellectual property system, experiencing high economic growth through policies that encourage investment and trade while still allowing for knowledge diffusion.
Ganguli Setting Ip Policies For Tech Transfer Offices In The Arab Worl1
Ganguli Setting Ip Policies For Tech Transfer Offices In The Arab Worl1
4th Technology Commercialization Conference Amman
Accenture Consumer Electronics Products And Services Usage 09
US study on the usage of consumer electronics and services including online
Concept of IPR and patent
The document discusses intellectual property rights (IPR) and patents. It begins with defining property and IPR, noting that IPR gives creators exclusive rights over their creations for a certain period. IPR is divided into industrial property and copyright. The main focus is on patents, which provide inventors exclusive rights to make and use inventions for 20 years. To be patented, inventions must be novel, involve an inventive step, and have industrial applicability. The patent process and requirements are described. Compulsory licensing and penalties for IPR infringement are also outlined. The conclusion emphasizes that IPR promotion encourages innovation.
Presentation on Roadmap for IPR Research in India
Presentation on Roadmap for IPR Research in India
Contact Us for Intellectual Property Services
BananaIP Counsels
Regd Office
No.40,3rd Main Road,JC Industrial Estate,
Kanakapura Road,Bangalore – 560 062.
Email: contact@bananaip.com
Telephone: +91-80-26860414 /24/34
Evolution of Industrial Policy in India
The document provides an overview of the evolution of industrial policy in India from 1948 to 1991. Some of the key highlights include:
1) Industrial policies were introduced in 1948, 1956, 1977, 1980 and 1991 to regulate private industry and encourage growth. These policies classified industries, set investment limits, and established rules around foreign investment and technology transfers.
2) The 1991 New Industrial Policy largely deregulated industry licensing, allowing automatic approvals for most foreign investment and technology transfers. Only a handful of industries remained restricted.
3) The changes aimed to boost growth by reducing bureaucracy, encouraging private business, and opening India's economy to global investment and trade. Location restrictions for industries were also relaxed under the new policy
Dr. Ravi Dhar on "Technology Transfer: an overview- 2014"
This document provides an overview of technology transfer. It discusses how technology transfer is the process of developing practical applications from scientific research results. It notes that while the concept has been practiced for many years, the volume of modern research and potential failures require careful management. The document then reviews the history of technology transfer in India, from ancient times to the present day, noting how economic reforms in the 1990s helped accelerate technology sourcing and in-licensing. It also outlines some of the key players and emerging clusters in India's biotechnology sector.
Viewers also liked (20)
Knowledge and Technology Transfer Office (KTTO) - By Sebastian Jimenez (Innov...
Knowledge and Technology Transfer Office (KTTO) - By Sebastian Jimenez (Innov...
Ganguli Setting Ip Policies For Tech Transfer Offices In The Arab Worl1
Ganguli Setting Ip Policies For Tech Transfer Offices In The Arab Worl1
Accenture Consumer Electronics Products And Services Usage 09
Accenture Consumer Electronics Products And Services Usage 09
Dr. Ravi Dhar on "Technology Transfer: an overview- 2014"
Dr. Ravi Dhar on "Technology Transfer: an overview- 2014"
More from EncycloMedia Networks
Creative showcase on the Unilever Brands
The document discusses Unilever's use of out-of-home advertising for their latest shampoo launch in India. It notes that Encyclomedia effectively and efficiently promoted the product using an interactive mirror installation and other out-of-home creatives. An employee of Unilever India praises Encyclomedia for the creative concepts used at various locations.
Impact Creative for Footwear and Apparel Brands
This document discusses shoe and apparel sourcing from multiple countries including Argentina, India, and Canada. India is mentioned most frequently, suggesting it may be a major sourcing location for shoes and apparel. The document also references an "India - Concept", implying a concept related to sourcing from India.
Creative Impact for Luggage Brands
The document discusses luggage and mentions India multiple times. It does not provide any other context or details beyond repeating the word "India" on each line.
Creative Impact for Beer Brands
EncycloMedia works with many beer brands across the globe for their OOH & In-store campaigns to increase recall and market share. Here are some examples of the campaigns we have executed for the beer brands.
Realty PPT
This document repeatedly mentions India 10 times. It focuses solely on discussing India, with no other details or context provided about the topic.
E commerce PPT
The document describes an e-commerce marketing campaign that used billboards with integrated LED screens at strategic locations. The LED screens displayed the number of current website visitors in real-time for the city where the billboard was located, such as showing 39041 visitors at 11:53 am. The billboards aimed to promote the e-commerce website and drive more traffic.
Cell Phone PPT
This document lists the countries Mexico, Turkey, India, Argentina, Ireland, Australia, Bangladesh, Saudi Arabia, and Dubai. India is listed the most with 8 mentions, followed by Argentina and Saudi Arabia with 2 mentions each. The other countries are each listed once. The document appears to be tracking locations relevant to the handset and telecom industries.
High Impact Creative for Banking and Financial Sector
EncycloMedia works with many Banks and companies in the financial sector OOH & In-branch campaigns. Here are some examples of the campaigns we have executed for the Banking and Finance Industry.
OOH & In-Store campaigns for Automotive Brands
EncycloMedia works with many automobile and motorbike brands across the globe for their OOH & In-store campaigns to increase recall and market share. Here are some examples of the campaigns we have designed and executed.
3D Designs for Telecom and Mobile handsets by EncycloMedia
This document lists the countries Mexico, Turkey, India, Argentina, Ireland, Australia, Bangladesh, Saudi Arabia, and Dubai. India is listed the most with 8 mentions, followed by Argentina and Saudi Arabia with 2 mentions each. The other countries are each listed once. The document appears to be tracking locations relevant to the handset and telecom industries.
Creative OOH & Retail
This document appears to contain a series of numbers counting down from 6 to 1. It does not contain any other words or context, so a 3 sentence summary is not possible to generate from the limited information provided.
More from EncycloMedia Networks (11)
High Impact Creative for Banking and Financial Sector
High Impact Creative for Banking and Financial Sector
3D Designs for Telecom and Mobile handsets by EncycloMedia
3D Designs for Telecom and Mobile handsets by EncycloMedia
Recently uploaded
Skybuffer SAM4U tool for SAP license adoption
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Generating privacy-protected synthetic data using Secludy and Milvus
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
Finale of the Year: Apply for Next One!
Presentation for the event called "Finale of the Year: Apply for Next One!" organized by GDSC PJATK
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
Predictive maintenance is a proactive approach that anticipates equipment failures before they happen. At the forefront of this innovative strategy is Artificial Intelligence (AI), which brings unprecedented precision and efficiency. AI in predictive maintenance is transforming industries by reducing downtime, minimizing costs, and enhancing productivity.
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Ocean Lotus cyber threat actors represent a sophisticated, persistent, and politically motivated group that poses a significant risk to organizations and individuals in the Southeast Asian region. Their continuous evolution and adaptability underscore the need for robust cybersecurity measures and international cooperation to identify and mitigate the threats posed by such advanced persistent threat groups.
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Recently uploaded (20)
Generating privacy-protected synthetic data using Secludy and Milvus
Generating privacy-protected synthetic data using Secludy and Milvus
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
WeTestAthens: Postman's AI & Automation Techniques
WeTestAthens: Postman's AI & Automation Techniques
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Deep Dive: Getting Funded with Jason Jason Lemkin Founder & CEO @ SaaStr
Deep Dive: Getting Funded with Jason Jason Lemkin Founder & CEO @ SaaStr
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Consumer Electronics PPT
Editor's Notes
- Dubai
- india
- india
- india
- india
- india
- india
- canada
- australia
- india
- india
- dubai
- dubai