Competent person
•
0 likes•85 views
This document outlines the competency requirements for personnel working on the Sungai Besi - Ulu Kelang (SUKE) Expressway Project. It specifies that all operators of machinery, equipment, cranes, and vehicles must have valid licenses and certificates from relevant authorities and a minimum number of years of experience operating similar equipment. Safety officers and supervisors overseeing scaffolding, welding, and electrical work must also meet minimum experience requirements and certifications as outlined in the local legislation and by the construction company, MRCB Builders. Contractors must only engage competent personnel who meet these competency standards.
Report
Share
Report
Share
Download to read offline
Recommended
effectively managing pre-dismissal and post-dismissal dispute-resolution proc...
effectively managing pre-dismissal and post-dismissal dispute-resolution proc...Marketing Durban Chamber
The Cox Yeats Labour Team is presenting a one-day workshop on effectively managing pre-dismissal and post-dismissal dispute resolution procedures. The workshop will cover topics such as utilizing procedural fairness, understanding pre-arbitration procedures, preparing for arbitration, and presenting your case effectively at arbitration. It will be held on Friday, September 2nd from 8:30am to 4pm at the Gateway Hotel in Umhlanga. The cost is R1,710 per person. Those interested can RSVP by August 26th.hubres2015-2
Jonathan Esparza has over 5 years of experience in fast-paced medical device assembly. He has decreased assembly times by 50% and increased production by 10% per day through time management and pace setting. He is proficient with various hand tools, power tools, inspection equipment, soldering, and reading blueprints. His experience includes assembly positions at Physio Control, Genie Industries, Olympic Medical, Spacelabs, and Philips Medical.
Repair laser
Laser Repair Depot repairs various lasers including medical, scientific, industrial, and aesthetic lasers. They provide repair services for diode, fiber, and flash lamp pumped lasers as well as IPL, Lightsheer, and cosmetic lasers. Laser Repair Depot aims to maximize value for customers and ensure complete satisfaction through quality repairs performed by expert laser technicians.
My biodata.
Chetan Prajapati is seeking a position that utilizes his skills in quality control inspection and allows for professional development. He has over 10 years of experience in quality control inspection for valves, pumps, and other industrial equipment. Currently, Chetan works as a QC Inspector at Q80 Valve Industries in Kuwait, where he handles inspection, testing, documentation, and ensures supplier and third party compliance.
AvsGlobal Profile
The document discusses a team of engineers with over 15 years of experience in water treatment systems across the globe. They have come together to form a multi-disciplinary team to utilize their expertise and help clients with best practices. The team has automated various water treatment systems and provides engineering consulting services such as EPC contracting, lender consulting, third party inspections, and O&M consulting. They are looking to expand into the Middle Eastern market.
Lifting using excavator
This document outlines the safe operating procedure for lifting using excavators on the Sungai Besi - Ulu Kelang (SUKE) Highway Project. It lists requirements such as possessing a valid lifting machinery certificate, clearly marking the safe working load, using an original manufacturer lifting hook, deploying a signalman, only travelling with the arm and boom retracted, having loads rigged by trained riggers under supervision, and requiring operators and riggers to be trained and competent. The procedure is part of MRCB Builders' efforts to ensure excavator lifting is done safely according to regulations on the highway construction project.
Inspections and tagging
This document outlines safe operating procedures for scaffolding at a construction site. It states that all scaffold components must be inspected for damage and certified as safe to use within 7 days of use. Upon installation and after any modifications, scaffolds must be inspected by a competent person according to local regulations. Scaffolds must also undergo ongoing inspections every 7 days or after exposure to weather events. Scaffolds under construction or modification must display red tags, while scaffolds deemed safe for use must display green tags with inspection details. Scaffolds cannot display both tags simultaneously.
Lifting approval and permit to-work
This document outlines safety procedures for lifting operations during a highway construction project. It requires contractors to submit a safe work method statement, risk assessment, and lifting plan for approval before any lifts. It also mandates daily coordination meetings when multiple cranes are operating to prevent clashes. All lifting activities must be clearly communicated and authorized through a permit system, with oversight from the project's crane coordinator to ensure lifts comply with approved plans and procedures.
Recommended
effectively managing pre-dismissal and post-dismissal dispute-resolution proc...
effectively managing pre-dismissal and post-dismissal dispute-resolution proc...Marketing Durban Chamber
The Cox Yeats Labour Team is presenting a one-day workshop on effectively managing pre-dismissal and post-dismissal dispute resolution procedures. The workshop will cover topics such as utilizing procedural fairness, understanding pre-arbitration procedures, preparing for arbitration, and presenting your case effectively at arbitration. It will be held on Friday, September 2nd from 8:30am to 4pm at the Gateway Hotel in Umhlanga. The cost is R1,710 per person. Those interested can RSVP by August 26th.hubres2015-2
Jonathan Esparza has over 5 years of experience in fast-paced medical device assembly. He has decreased assembly times by 50% and increased production by 10% per day through time management and pace setting. He is proficient with various hand tools, power tools, inspection equipment, soldering, and reading blueprints. His experience includes assembly positions at Physio Control, Genie Industries, Olympic Medical, Spacelabs, and Philips Medical.
Repair laser
Laser Repair Depot repairs various lasers including medical, scientific, industrial, and aesthetic lasers. They provide repair services for diode, fiber, and flash lamp pumped lasers as well as IPL, Lightsheer, and cosmetic lasers. Laser Repair Depot aims to maximize value for customers and ensure complete satisfaction through quality repairs performed by expert laser technicians.
My biodata.
Chetan Prajapati is seeking a position that utilizes his skills in quality control inspection and allows for professional development. He has over 10 years of experience in quality control inspection for valves, pumps, and other industrial equipment. Currently, Chetan works as a QC Inspector at Q80 Valve Industries in Kuwait, where he handles inspection, testing, documentation, and ensures supplier and third party compliance.
AvsGlobal Profile
The document discusses a team of engineers with over 15 years of experience in water treatment systems across the globe. They have come together to form a multi-disciplinary team to utilize their expertise and help clients with best practices. The team has automated various water treatment systems and provides engineering consulting services such as EPC contracting, lender consulting, third party inspections, and O&M consulting. They are looking to expand into the Middle Eastern market.
Lifting using excavator
This document outlines the safe operating procedure for lifting using excavators on the Sungai Besi - Ulu Kelang (SUKE) Highway Project. It lists requirements such as possessing a valid lifting machinery certificate, clearly marking the safe working load, using an original manufacturer lifting hook, deploying a signalman, only travelling with the arm and boom retracted, having loads rigged by trained riggers under supervision, and requiring operators and riggers to be trained and competent. The procedure is part of MRCB Builders' efforts to ensure excavator lifting is done safely according to regulations on the highway construction project.
Inspections and tagging
This document outlines safe operating procedures for scaffolding at a construction site. It states that all scaffold components must be inspected for damage and certified as safe to use within 7 days of use. Upon installation and after any modifications, scaffolds must be inspected by a competent person according to local regulations. Scaffolds must also undergo ongoing inspections every 7 days or after exposure to weather events. Scaffolds under construction or modification must display red tags, while scaffolds deemed safe for use must display green tags with inspection details. Scaffolds cannot display both tags simultaneously.
Lifting approval and permit to-work
This document outlines safety procedures for lifting operations during a highway construction project. It requires contractors to submit a safe work method statement, risk assessment, and lifting plan for approval before any lifts. It also mandates daily coordination meetings when multiple cranes are operating to prevent clashes. All lifting activities must be clearly communicated and authorized through a permit system, with oversight from the project's crane coordinator to ensure lifts comply with approved plans and procedures.
Duties lifting supervisors
This document outlines the duties and responsibilities of lifting supervisors for a private highway project in Malaysia. The lifting supervisors are responsible for: (1) monitoring lifting operations to ensure they are carried out safely and in compliance with approved plans; (2) briefing lifting crews on plans and ensuring understanding before lifts; and (3) day-to-day management and coordination of lifting operations, including meetings for lifts using multiple cranes. They must also check contractor competencies and appointments, and monitor safe execution of lifts according to the Crane Lift Plan.
Mazagon Dock Recruitment 2022 Notification For 1501 Non Executive Posts
The document announces the recruitment of 1501 non-executives on a fixed term contract basis at Mazagon Dock Shipbuilders Limited for a period of 3 years, which may be extended by 1+1 years. Various trades are listed with the number of current and backlog vacancies for skilled, semi-skilled, and special grade positions. Eligibility criteria including required qualifications and experience are provided for each trade.
Storm water, sediment and erosion control
This document outlines safe operating procedures for storm water, sediment, and erosion control for a highway construction project. It states that sediment and erosion control devices must be implemented and maintained to prevent soil loss and water pollution. Stormwater and sediment risks must be addressed based on slope, soil type, and weather. All stormwater runoff must be treated before discharge. Stormwater drains, traps, and detention ponds must be cleaned and maintained to filter pollutants and prevent uncontrolled discharges. Any water discharged into watercourses must be filtered, treated, comply with regulations, and have discharge records kept.
Magdy hussine cv
I am mechanical Engineer having 21 years’ experience in commissioning and start up large power plants.
I have 14 years’ Experience as lead Engineer.
I have B.Sc. of Mechanical Engineering In Thermal Power Engineering on 1993 also I have Post graduate Diploma of Mechanical Engineering in Thermal Power Engineering on 2001.
I work before to KDP, Toshiba, Nem, ABB, Ansaldo Caldaia, Samsung C&T and Metka companies.
Last job I was working as commissioning team leader with Samsung C&T in Qurayyah IPP power plant 4100 MW in KSA.
Herewith my CV attached please find it.
Kindly I am looking for a new opportunity
Best Regards,
Magdy Hussine
Mechanical Commissioning and Start up Leader Engineer
C V Dulla SUP Did - Copy
This document provides a curriculum vitae for Dulla Dhanesh Dalpatram, an instrumentation technician with over 17 years of experience in India and the Gulf region working for companies in petrochemicals, oil refining, and gas plants. It outlines his objective to provide excellence through knowledge and hard work in a senior instrumentation role. It then details his job responsibilities and experience maintaining, commissioning, and troubleshooting various instrumentation including pneumatic, electronic, and smart instruments. It lists his employment history from 1989 to present in various roles and countries. It concludes with personal information and qualifications including education and safety training.
L&T Inplant training at chennai metro report
Larsen and Toubro (L&T) was awarded contracts to complete two unfinished sections of the Chennai Metro rail project after the previous contractor abruptly pulled out. L&T is responsible for the design and construction of underground stations and tunnels between Government Estate and Saidapet. Extensive surveys and investigations were conducted before construction, including basic surveys, soil investigations, and subsurface investigations to understand the land, topography, and soil conditions. The Environmental Health and Safety department of L&T oversees safety procedures and training to ensure worker and public safety during the large-scale metro construction project.
Legal register
The document outlines various legal and regulatory requirements that must be complied with relating to environmental, health and safety standards. Key requirements include obtaining necessary approvals for construction activities, complying with ambient air and water quality standards, managing hazardous waste properly, conducting safety inspections and training, and maintaining required documentation such as monitoring records. Non-compliance could result in penalties from regulatory authorities.
06 5759-tec ops-sect 3 (3.01-3.10)- repairs, maint & insp
This document outlines Bernhard Schulte Shipmanagement's policies and procedures for repairs, maintenance, and inspections on vessels. It details requirements for inspection and maintenance plans to be developed by the Chief Officer and Chief Engineer. It also describes procedures for work planning meetings at monthly, weekly, and daily intervals to plan maintenance tasks. Toolbox meetings with crew are required before maintenance work to review safety aspects. Non-conformities and equipment defects must be reported and tracked for rectification. A Planned Maintenance System (PMS) is used to schedule all maintenance tasks.
MS_IEC_60601-1_2006.pdf
This document provides the summary of MS IEC 60601-1:2006 Medical Electrical Equipment - Part 1: General Requirements for Basic Safety and Essential Performance. It outlines the general requirements and testing standards for medical electrical equipment to ensure basic safety and essential performance. The document defines terms related to medical devices. It also describes classification systems for medical equipment based on factors like protection against electric shock and water ingress. Furthermore, it specifies various marking, labeling and documentation requirements for medical devices to identify them and provide safety and operating instructions.
Mih[.CV2013updated
Abdellah Mih is a 48-year-old Algerian electrical engineer and project manager with over 22 years of experience maintaining electrical equipment on LNG tankers and as an electro-technical officer. He is fluent in English and French with basic Spanish. His qualifications include a diploma in electrical engineering, project management certification, and various safety and technical training certificates. Currently he works as a project manager for a corrugated paper machine company after many years of experience on LNG ships and in dry dock maintenance and management.
Core Risk Assessment for Office work.docx
This document contains a risk assessment for office and site work activities at a project in Al Wathba, Abu Dhabi. It identifies 8 activities with potential hazards and risks: 1) employee mobilization, 2) office work, 3) using printers, 4) using hole punchers/scissors/staplers, 5) using display screen equipment, 6) electrical connections, 7) working in hot/humid conditions, and 8) lack of information/awareness about working in heat. For each activity, it evaluates risk level, lists control measures to reduce risk, identifies responsible parties, and notes applicable legal references and standards. The overall goal is to reduce risk levels through trainings, proper equipment use,
HSE ABDUL GULREZ AKHTAR CV
Abdul Gulrez Akhtar is applying for the position of Senior Safety Officer/Advisor. He has over 7 years of experience in EHS management working on various construction projects in Saudi Arabia and UAE. He outlines his responsibilities in previous roles developing and implementing safety plans, conducting audits and inspections, investigating incidents, and reporting. He emphasizes skills like teamwork, communication, and adapting to demanding environments.
Wind mills audit report copy
Varroc Group's windmill projects experienced delays in initiating the renewable energy certificate (REC) mechanism, obtaining accreditation and registration under the REC framework, and selling its first REC set. This resulted in missed opportunities to earn REC income for electricity units generated between April 2011 to May 2012, estimated at INR 146.29 lakhs. The audit recommends that Varroc join relevant trade associations and subscribe to industry publications to stay updated on government policies and frameworks. Management acknowledged the delay but stated that the REC process was started as soon as they received information about the mechanism.
Technician (L&P)
The document summarizes a technician's responsibilities at Halliburton International Inc. from July 2013 to present. The technician's main responsibilities include inspecting and maintaining open and cased hole logging tools, preparing tools for jobs, conducting maintenance, and troubleshooting issues. The technician also received training in safety areas like personal protective equipment, radiation awareness, substance abuse prevention, and environmental awareness.
P.s.santhosh kumar (resume).doc
PS Santhosh Kumar is applying for a suitable mechanical position. He has a B.Tech in Mechanical Engineering with 7 years of experience in projects, commissioning, and maintenance of air separation plants. Currently he is the Maintenance In-charge at Vedanta Group managing a team of 20 staff. He is looking for new opportunities to further develop his skills and help organizations achieve their goals.
SAFETY REQUIREMENTS FOR FORMWORK STRUCTURES
This document outlines safety requirements and procedures for formwork structures used in concrete construction. It specifies that a professional engineer must design complex or tall formwork structures and provide documentation. Requirements include using sound materials, bracing, fall protection, inspection, and following the engineer's design and dismantling procedures. The formwork must safely support all loads and be constructed, concreted, and dismantled safely according to the engineer's specifications and risk assessments.
BINAPURI OSH Management System Awareness Training
This document outlines the objectives and roadmap for Bina Puri Sdn Bhd and Bina Puri Construction Sdn Bhd to achieve Occupational Safety and Health Management System (OSHMS) certification according to OHSAS 18001 and MS 1722 standards. It discusses the integration of OSHMS documents with quality management systems, roles and responsibilities, audit processes, and accident management procedures. The overall goal is to minimize risks to employees and ensure compliance with legal requirements through a systematic OSH management approach.
Jowm for web
The document announces job openings at NMDC Limited's Donimalai Iron Ore Mine and Pellet Plant in Karnataka, India. It provides details on 17 open positions, required qualifications and experience for each. Key information includes:
- Application deadline is March 10, 2015. Positions include Junior Officers, Operators, Mechanics, Technicians, Assistants and Attendants.
- Qualifications range from graduate degrees to diplomas and ITIs. Relevant experience is required for some roles.
- Selected candidates will undergo paid training from 18-24 months before placement in regular pay scales.
- Application fees are Rs. 100-50, waived for SC/ST/PWD
adnan haider
Adnan Haider is seeking a challenging job in health and safety where he can utilize his technical background and experience. He has over 10 years of experience in health, safety, and environment roles where he developed and executed safety plans, conducted training, inspected equipment, and investigated accidents. His experience spans roles in Saudi Arabia, the UAE, and Oman. He has expertise in areas like HVAC systems, firefighting systems, and heavy equipment inspection.
altaf resume work preparation
Mohammed Altaf Hussain is applying for the position of Works Preparation Controller. He has over 12 years of experience in Gulf countries working on various oil and gas projects as a welding system operator and document/data/work preparation controller. He has strong technical skills in MS Office applications and operating systems.
SHASSIC KV.pdf
Sistem Penilaian Keselamatan dan Kesihatan dalam Pembinaan atau SHASSIC bertujuan menilai prestasi kontraktor dalam pengurusan keselamatan dan kesihatan di tapak pembinaan. Ia terdiri daripada 3 komponen utama: semakan dokumen, pemeriksaan tapak kerja, dan temubual pekerja. SHASSIC memberi manfaat kepada kontraktor untuk mengenal pasti kelemahan dan meningkatkan amalan keselamatan melalui latihan.
KV Segamat SHASSIC.pdf
This document outlines the agenda and content for a training session on the Safety Health Assessment System in Construction (SHASSIC). The agenda covers an overview of SHASSIC and the construction industry, SHASSIC assessment approaches including document review, workplace inspection, and employee interviews. It also discusses the SHASSIC scoring methodology and provides examples of score calculations. The training aims to guide participants on how to assess construction project safety and health performance using the SHASSIC framework.
More Related Content
Similar to Competent person
Duties lifting supervisors
This document outlines the duties and responsibilities of lifting supervisors for a private highway project in Malaysia. The lifting supervisors are responsible for: (1) monitoring lifting operations to ensure they are carried out safely and in compliance with approved plans; (2) briefing lifting crews on plans and ensuring understanding before lifts; and (3) day-to-day management and coordination of lifting operations, including meetings for lifts using multiple cranes. They must also check contractor competencies and appointments, and monitor safe execution of lifts according to the Crane Lift Plan.
Mazagon Dock Recruitment 2022 Notification For 1501 Non Executive Posts
The document announces the recruitment of 1501 non-executives on a fixed term contract basis at Mazagon Dock Shipbuilders Limited for a period of 3 years, which may be extended by 1+1 years. Various trades are listed with the number of current and backlog vacancies for skilled, semi-skilled, and special grade positions. Eligibility criteria including required qualifications and experience are provided for each trade.
Storm water, sediment and erosion control
This document outlines safe operating procedures for storm water, sediment, and erosion control for a highway construction project. It states that sediment and erosion control devices must be implemented and maintained to prevent soil loss and water pollution. Stormwater and sediment risks must be addressed based on slope, soil type, and weather. All stormwater runoff must be treated before discharge. Stormwater drains, traps, and detention ponds must be cleaned and maintained to filter pollutants and prevent uncontrolled discharges. Any water discharged into watercourses must be filtered, treated, comply with regulations, and have discharge records kept.
Magdy hussine cv
I am mechanical Engineer having 21 years’ experience in commissioning and start up large power plants.
I have 14 years’ Experience as lead Engineer.
I have B.Sc. of Mechanical Engineering In Thermal Power Engineering on 1993 also I have Post graduate Diploma of Mechanical Engineering in Thermal Power Engineering on 2001.
I work before to KDP, Toshiba, Nem, ABB, Ansaldo Caldaia, Samsung C&T and Metka companies.
Last job I was working as commissioning team leader with Samsung C&T in Qurayyah IPP power plant 4100 MW in KSA.
Herewith my CV attached please find it.
Kindly I am looking for a new opportunity
Best Regards,
Magdy Hussine
Mechanical Commissioning and Start up Leader Engineer
C V Dulla SUP Did - Copy
This document provides a curriculum vitae for Dulla Dhanesh Dalpatram, an instrumentation technician with over 17 years of experience in India and the Gulf region working for companies in petrochemicals, oil refining, and gas plants. It outlines his objective to provide excellence through knowledge and hard work in a senior instrumentation role. It then details his job responsibilities and experience maintaining, commissioning, and troubleshooting various instrumentation including pneumatic, electronic, and smart instruments. It lists his employment history from 1989 to present in various roles and countries. It concludes with personal information and qualifications including education and safety training.
L&T Inplant training at chennai metro report
Larsen and Toubro (L&T) was awarded contracts to complete two unfinished sections of the Chennai Metro rail project after the previous contractor abruptly pulled out. L&T is responsible for the design and construction of underground stations and tunnels between Government Estate and Saidapet. Extensive surveys and investigations were conducted before construction, including basic surveys, soil investigations, and subsurface investigations to understand the land, topography, and soil conditions. The Environmental Health and Safety department of L&T oversees safety procedures and training to ensure worker and public safety during the large-scale metro construction project.
Legal register
The document outlines various legal and regulatory requirements that must be complied with relating to environmental, health and safety standards. Key requirements include obtaining necessary approvals for construction activities, complying with ambient air and water quality standards, managing hazardous waste properly, conducting safety inspections and training, and maintaining required documentation such as monitoring records. Non-compliance could result in penalties from regulatory authorities.
06 5759-tec ops-sect 3 (3.01-3.10)- repairs, maint & insp
This document outlines Bernhard Schulte Shipmanagement's policies and procedures for repairs, maintenance, and inspections on vessels. It details requirements for inspection and maintenance plans to be developed by the Chief Officer and Chief Engineer. It also describes procedures for work planning meetings at monthly, weekly, and daily intervals to plan maintenance tasks. Toolbox meetings with crew are required before maintenance work to review safety aspects. Non-conformities and equipment defects must be reported and tracked for rectification. A Planned Maintenance System (PMS) is used to schedule all maintenance tasks.
MS_IEC_60601-1_2006.pdf
This document provides the summary of MS IEC 60601-1:2006 Medical Electrical Equipment - Part 1: General Requirements for Basic Safety and Essential Performance. It outlines the general requirements and testing standards for medical electrical equipment to ensure basic safety and essential performance. The document defines terms related to medical devices. It also describes classification systems for medical equipment based on factors like protection against electric shock and water ingress. Furthermore, it specifies various marking, labeling and documentation requirements for medical devices to identify them and provide safety and operating instructions.
Mih[.CV2013updated
Abdellah Mih is a 48-year-old Algerian electrical engineer and project manager with over 22 years of experience maintaining electrical equipment on LNG tankers and as an electro-technical officer. He is fluent in English and French with basic Spanish. His qualifications include a diploma in electrical engineering, project management certification, and various safety and technical training certificates. Currently he works as a project manager for a corrugated paper machine company after many years of experience on LNG ships and in dry dock maintenance and management.
Core Risk Assessment for Office work.docx
This document contains a risk assessment for office and site work activities at a project in Al Wathba, Abu Dhabi. It identifies 8 activities with potential hazards and risks: 1) employee mobilization, 2) office work, 3) using printers, 4) using hole punchers/scissors/staplers, 5) using display screen equipment, 6) electrical connections, 7) working in hot/humid conditions, and 8) lack of information/awareness about working in heat. For each activity, it evaluates risk level, lists control measures to reduce risk, identifies responsible parties, and notes applicable legal references and standards. The overall goal is to reduce risk levels through trainings, proper equipment use,
HSE ABDUL GULREZ AKHTAR CV
Abdul Gulrez Akhtar is applying for the position of Senior Safety Officer/Advisor. He has over 7 years of experience in EHS management working on various construction projects in Saudi Arabia and UAE. He outlines his responsibilities in previous roles developing and implementing safety plans, conducting audits and inspections, investigating incidents, and reporting. He emphasizes skills like teamwork, communication, and adapting to demanding environments.
Wind mills audit report copy
Varroc Group's windmill projects experienced delays in initiating the renewable energy certificate (REC) mechanism, obtaining accreditation and registration under the REC framework, and selling its first REC set. This resulted in missed opportunities to earn REC income for electricity units generated between April 2011 to May 2012, estimated at INR 146.29 lakhs. The audit recommends that Varroc join relevant trade associations and subscribe to industry publications to stay updated on government policies and frameworks. Management acknowledged the delay but stated that the REC process was started as soon as they received information about the mechanism.
Technician (L&P)
The document summarizes a technician's responsibilities at Halliburton International Inc. from July 2013 to present. The technician's main responsibilities include inspecting and maintaining open and cased hole logging tools, preparing tools for jobs, conducting maintenance, and troubleshooting issues. The technician also received training in safety areas like personal protective equipment, radiation awareness, substance abuse prevention, and environmental awareness.
P.s.santhosh kumar (resume).doc
PS Santhosh Kumar is applying for a suitable mechanical position. He has a B.Tech in Mechanical Engineering with 7 years of experience in projects, commissioning, and maintenance of air separation plants. Currently he is the Maintenance In-charge at Vedanta Group managing a team of 20 staff. He is looking for new opportunities to further develop his skills and help organizations achieve their goals.
SAFETY REQUIREMENTS FOR FORMWORK STRUCTURES
This document outlines safety requirements and procedures for formwork structures used in concrete construction. It specifies that a professional engineer must design complex or tall formwork structures and provide documentation. Requirements include using sound materials, bracing, fall protection, inspection, and following the engineer's design and dismantling procedures. The formwork must safely support all loads and be constructed, concreted, and dismantled safely according to the engineer's specifications and risk assessments.
BINAPURI OSH Management System Awareness Training
This document outlines the objectives and roadmap for Bina Puri Sdn Bhd and Bina Puri Construction Sdn Bhd to achieve Occupational Safety and Health Management System (OSHMS) certification according to OHSAS 18001 and MS 1722 standards. It discusses the integration of OSHMS documents with quality management systems, roles and responsibilities, audit processes, and accident management procedures. The overall goal is to minimize risks to employees and ensure compliance with legal requirements through a systematic OSH management approach.
Jowm for web
The document announces job openings at NMDC Limited's Donimalai Iron Ore Mine and Pellet Plant in Karnataka, India. It provides details on 17 open positions, required qualifications and experience for each. Key information includes:
- Application deadline is March 10, 2015. Positions include Junior Officers, Operators, Mechanics, Technicians, Assistants and Attendants.
- Qualifications range from graduate degrees to diplomas and ITIs. Relevant experience is required for some roles.
- Selected candidates will undergo paid training from 18-24 months before placement in regular pay scales.
- Application fees are Rs. 100-50, waived for SC/ST/PWD
adnan haider
Adnan Haider is seeking a challenging job in health and safety where he can utilize his technical background and experience. He has over 10 years of experience in health, safety, and environment roles where he developed and executed safety plans, conducted training, inspected equipment, and investigated accidents. His experience spans roles in Saudi Arabia, the UAE, and Oman. He has expertise in areas like HVAC systems, firefighting systems, and heavy equipment inspection.
altaf resume work preparation
Mohammed Altaf Hussain is applying for the position of Works Preparation Controller. He has over 12 years of experience in Gulf countries working on various oil and gas projects as a welding system operator and document/data/work preparation controller. He has strong technical skills in MS Office applications and operating systems.
Similar to Competent person (20)
Mazagon Dock Recruitment 2022 Notification For 1501 Non Executive Posts
Mazagon Dock Recruitment 2022 Notification For 1501 Non Executive Posts
06 5759-tec ops-sect 3 (3.01-3.10)- repairs, maint & insp
06 5759-tec ops-sect 3 (3.01-3.10)- repairs, maint & insp
More from HASNIZAM BIN MD SAAD
SHASSIC KV.pdf
Sistem Penilaian Keselamatan dan Kesihatan dalam Pembinaan atau SHASSIC bertujuan menilai prestasi kontraktor dalam pengurusan keselamatan dan kesihatan di tapak pembinaan. Ia terdiri daripada 3 komponen utama: semakan dokumen, pemeriksaan tapak kerja, dan temubual pekerja. SHASSIC memberi manfaat kepada kontraktor untuk mengenal pasti kelemahan dan meningkatkan amalan keselamatan melalui latihan.
KV Segamat SHASSIC.pdf
This document outlines the agenda and content for a training session on the Safety Health Assessment System in Construction (SHASSIC). The agenda covers an overview of SHASSIC and the construction industry, SHASSIC assessment approaches including document review, workplace inspection, and employee interviews. It also discusses the SHASSIC scoring methodology and provides examples of score calculations. The training aims to guide participants on how to assess construction project safety and health performance using the SHASSIC framework.
Machinery Inspection.pdf
This document contains a machinery inspection checklist used to inspect various types of construction equipment. The checklist includes items like body structure, hydraulic hoses, leakages, lights, fire extinguishers, brakes, lubrication levels, and safety equipment. Mechanics use this checklist to systematically inspect equipment, note any issues found, and get supervisor approval.
HASNIZAM SHASSIC CIS 10 2020 (CIDB).pdf
This document contains information relating to a SHASSIC (Safety and Health Assessment System in Construction) assessment for a construction project. It includes an agenda for the assessment activities over one day, which involves document review, questionnaires for different levels of staff, and a site inspection. Forms are provided to record attendance, document checklist results, and collect information on the project and SHASSIC assessment. The document aims to provide structure and records for conducting the SHASSIC assessment of the construction project's safety and health system and performance.
SHASSIC HASNIZAM.pdf
Sistem Penilaian Keselamatan dan Kesihatan dalam Pembinaan atau SHASSIC bertujuan menilai prestasi kontraktor dalam pengurusan keselamatan dan kesihatan di tapak pembinaan. Ia terdiri daripada 3 komponen utama: semakan dokumen, pemeriksaan tapak kerja, dan temubual pekerja. SHASSIC memberi manfaat kepada kontraktor untuk mengenal pasti kelemahan dan meningkatkan amalan keselamatan melalui latihan.
Latihan Asas Pengawal Bendera
Dokumen ini memberikan panduan untuk pengawal bendera dalam mengawal lalulintas di tapak pembinaan. Ia menjelaskan tanggungjawab pengawal bendera untuk mengekalkan kecekapan dan keselamatan lalulintas dengan menggunakan peralatan seperti bendera, baton cahaya dan pakaian reflektif. Dokumen ini juga memberikan panduan untuk tindakan seperti memberi isyarat untuk memperlahankan, menghentikan
Heat Stroke
Heat stroke is a life-threatening condition caused by the body overheating, usually as a result of prolonged exposure to or physical exertion in high temperatures. It is characterized by an elevated core body temperature above 40°C and alterations in the central nervous system. Left untreated, heat stroke can cause death or permanent disability. Those at highest risk include children, the elderly, those with chronic illnesses, athletes, and outdoor workers. To prevent heat stroke, it is important to stay hydrated, limit strenuous activity during hot weather, wear loose-fitting clothing, and monitor for symptoms in high-risk groups. Immediate cooling of the body and medical help are needed if heat stroke occurs.
HEALTH EFFECTS OF CIGARETTE SMOKING.pdf
This document discusses the health effects of cigarette smoking. It notes that cigarettes contain over 7,000 chemical compounds, including 70 that are carcinogenic. The four worst diseases caused by smoking are heart disease, stroke, COPD, and lung cancer. Quitting smoking is difficult due to nicotine addiction but can significantly improve health outcomes over time by reducing risks of these and other smoking-related diseases. The document also covers the dangers of secondhand and thirdhand smoke exposure.
SHASSIC CIS 10 2020
The document provides information on a training program on Safety Health Assessment System in Construction (SHASSIC). It includes an agenda for the training with topics such as Construction Industry Overview, SHASSIC Overview, Assessors Guide for Document Check, Workplace Inspection and Interview. It also includes formulas and examples for calculating SHASSIC scores based on compliance and non-compliance during the Document Check and Workplace Inspection assessments. Special situations with different number of high risk activities are also covered.
Standard Industri Pembinaan cis 10 2020
This document presents the Construction Industry Standard (CIS 10:2020) for the Safety and Health Assessment System in Construction (SHASSIC) in Malaysia. SHASSIC provides a standardized method to assess and evaluate contractors' occupational safety and health performance on construction projects. It involves assessing documentation, inspecting workplaces, and interviewing employees. The assessment covers various safety and health aspects such as policies, hazard identification, training, emergency response, and performance monitoring. Compliance with SHASSIC helps contractors improve their safety practices but does not guarantee legal compliance. The standard references several Malaysian occupational safety laws and regulations.
Handbook for rigger signalman hasnizam
This handbook provides guidance on worker safety for riggers and signalmen. It outlines proper attire and safety equipment, roles and responsibilities, good and bad rigging practices, inspections of lifting equipment, and crane hand signals. The handbook aims to help riggers and signalmen understand their roles to ensure safe lifting operations through correct rigging, inspections, communication and following recommended signals. Maintaining good communication between all parties is emphasized.
SHASSIC CIS 10 : 2018
The document consists of repetitions of the name "HASNIZAM BIN MD SAAD" appearing on different lines without any other context or information provided.
Sila pakai topeng muka
The document recommends wearing face masks, using hand sanitizer, practicing social distancing, and maintaining personal space for safety and health. It is signed by Hasnizam Md Saad, an occupational safety and health practitioner, suggesting these are guidelines for protecting against illness.
Garispanduan pkp pembinaan
Dokumen tersebut menyediakan garis panduan langkah pencegahan Covid-19 di tapak pembinaan untuk memastikan keselamatan dan mengurangkan risiko penularan. Ia meliputi langkah-langkah seperti saringan kesihatan, pengangkutan pekerja, amalan di tapak pembinaan seperti penjarakan sosial, dan kebersihan. Dokumen ini bertujuan membantu pihak berkaitan mengambil langkah berjaga-jaga di tapak
Covid 19 guidance for the workplace
This document provides guidance from MRCB Group of Companies on preventing the spread of COVID-19 at construction project sites. It outlines procedures for monitoring the virus situation, producing a business continuity plan, preventing infection through hand hygiene and distancing measures, and certifying sick leave. The guidance is intended to safeguard workers and operations during the COVID-19 outbreak while following the latest advisories from Malaysian health authorities.
Sohelp
Program SoHELP bertujuan untuk meningkatkan tahap kepatuhan terhadap kesihatan pekerjaan terutamanya dalam pengurusan bahan kimia, bunyi dan ergonomi. Ia melibatkan kerjasama antara pihak berkuasa kesihatan dan keselamatan pekerjaan dengan syarikat untuk menilai dan meningkatkan amalan kesihatan pekerjaan melalui lima peringkat pelaksanaan.
Working at height
The document contains safety guidelines and requirements for working at heights from Hasnizam Md Saad, the Safety & Health Officer at MRCB Learning Development Centre in Kuala Lumpur. It addresses the need to use proper personal protective equipment when working over 3 meters high or on scaffolding. Checklists are provided on roles and responsibilities, competence training, signage requirements, and examples of unsafe conditions like missing guardrails or unstable scaffolding. Contact details for Hasnizam are listed for any safety-related questions.
Mrcb forklift training
The document discusses project S210 to construct elevated stations and associated works at Cyberjaya City Centre and Putrajaya Sentral on the Mass Rapid Transit Line 2 from Sungai Buloh to Serdang to Putrajaya. It includes contract details and discusses safe forklift operation procedures such as pre-operation checks, fueling, loading, unloading, and trailer operations to prevent accidents and injuries.
More from HASNIZAM BIN MD SAAD (20)
Recently uploaded
Introduction to AI for Nonprofits with Tapp Network
Dive into the world of AI! Experts Jon Hill and Tareq Monaur will guide you through AI's role in enhancing nonprofit websites and basic marketing strategies, making it easy to understand and apply.
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama UniversityAkanksha trivedi rama nursing college kanpur.
Natural birth techniques are various type such as/ water birth , alexender method, hypnosis, bradley method, lamaze method etcclinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS Template 2023-2024 by: Irene S. Rueco
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
Advanced Java[Extra Concepts, Not Difficult].docx
This is part 2 of my Java Learning Journey. This contains Hashing, ArrayList, LinkedList, Date and Time Classes, Calendar Class and more.
How to Build a Module in Odoo 17 Using the Scaffold Method
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
A Strategic Approach: GenAI in Education
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
MATATAG CURRICULUM: ASSESSING THE READINESS OF ELEM. PUBLIC SCHOOL TEACHERS I...
In this research, it concludes that while the readiness of teachers in Caloocan City to implement the MATATAG Curriculum is generally positive, targeted efforts in professional development, resource distribution, support networks, and comprehensive preparation can address the existing gaps and ensure successful curriculum implementation.
Top five deadliest dog breeds in America
Thinking of getting a dog? Be aware that breeds like Pit Bulls, Rottweilers, and German Shepherds can be loyal and dangerous. Proper training and socialization are crucial to preventing aggressive behaviors. Ensure safety by understanding their needs and always supervising interactions. Stay safe, and enjoy your furry friends!
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Let’s explore the intersection of technology and equity in the final session of our DEI series. Discover how AI tools, like ChatGPT, can be used to support and enhance your nonprofit's DEI initiatives. Participants will gain insights into practical AI applications and get tips for leveraging technology to advance their DEI goals.
Recently uploaded (20)
Introduction to AI for Nonprofits with Tapp Network
Introduction to AI for Nonprofits with Tapp Network
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
How to Build a Module in Odoo 17 Using the Scaffold Method
How to Build a Module in Odoo 17 Using the Scaffold Method
Pride Month Slides 2024 David Douglas School District
Pride Month Slides 2024 David Douglas School District
MATATAG CURRICULUM: ASSESSING THE READINESS OF ELEM. PUBLIC SCHOOL TEACHERS I...
MATATAG CURRICULUM: ASSESSING THE READINESS OF ELEM. PUBLIC SCHOOL TEACHERS I...
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Competent person
- 1. PROJEK PENSWASTAAN LEBUHRAYA BERTINGKAT SUNGAI BESI – ULU KELANG (SUKE) : PACKAGE CA2 TENDERNO:TURNPIKE-SUKE-T-A-ML-CA2-011(Rev.1) Doc. No. SUKE/CA2/ESH/SOP/01 Rev. No. 0 Rev. Date JANUARY 2020 SAFE OPERATING PROCEDURE _______________________________________________________________________________ MRCBBUILDERS SDN BHD(COMPANY NO: 300947-T) PREPARED BY: ………………………………………. HASNIZAM MD SAAD SAFETY & HEALTH OFFICER REVIEW BY: ………………………………. MOHD SYAFIQ EZZUDDIN MANAGER ESH APPROVE BY: ……………………………………. LEE JUIN LIAN SR PROJECT MANAGER Duties and Responsibilities Competent Person 1. Contractor to only engage competent personnel for activities requires special competencies as per the Local Legislations and MRCB ESH Requirements. 2. All drivers & machinery operators must have valid driving license and certificates from relevant authorities. This includes the Excavators, Backhoe, Cranes & Heavy and Light Vehicles. 3. Other equipment such as Fork Lift, Sky lift, Boom Lift, Scissors Lift, Mast Climbers, Gondola, Spider Cranes, etc. if not covered under licensed based competencies, an acknowledgement letter from company clearly stating the details of the experience with copy of training certificates from authorised third party will be required. The approval will be also subject to verification of competencies (V.O.C) and assessment where required by MRCB. 4. All plant, machineries or equipment operator must have minimum 3 years of experiences in operating similar type and model of plant, machineries or equipment. 5. Tower Crane & Mobile Crane operators must have minimum 5 years of experience in operating similar capacity cranes. 6. Safety & Health Officer (SHO)-DOSH Registered (Green Book)- minimum 5 years’ experience. 7. Site Safety Supervisor (SSS)-DOSH Registered (Yellow Book)- minimum 3 years’ experience. 8. Scaffolds Erector- DOSH registered competent person – minimum 3 years’ experience. 9. Scaffold Supervisor & Inspector –DOSH registered – minimum 3 years’ experience. 10. Welders-Welding certificates & DOSH Registered where required – minimum 2 years’ experience. 11. Electrician- Licensed electrician as per the Energy Commission /Suruhanjaya Tenaga (EC/ST) - 3 years’ experience. 12. Contractors to comply with any other latest competency needs under the MRCB ESH Requirements or Local Legislations which may not be captured in this document. SAFE OPERATING PROCEDURE