Safety engineering and the environment (scqf level 5) dr2 d34
Technician (L&P)
1. Position: Technician (Logging & Perforating).
Company: Halliburton International Inc. (www.halliburton.com)
Duration: July, 2013 - Present.
Responsibilities:
Making sure all safety precaution equipment is taken.
Periodically inspection of all types of open hole-cased hole tools, hand tools,
safety equipment, lifting gears, calibration and high pressure equipment.
Open hole and cased hole tools and equipment preparation, maintenance,
calibration, proper utilization, planning and implementation.
Perform all necessary troubleshooting with the tools or the unit as required during
or after a job, with proper reporting for the same.
Preparation of purchase requisition, follow up and finally check-up of tools and
equipments, Evaluate and plan the requirements of spare parts and consumable
stock of all systems components.
Conducted failure analysis of mechanical & electrical failures as well as
unexpected maintenance & operational problems related to tools and
equipment.
Perform post job service of open and cased hole logging and perforating tools.
Down hole tools trouble shooting during tools calibration.
Reservoir description tool (RDT) PM1, PM2, PM3 maintenance
and troubleshooting (mechanical and electrical part).
Perform RDT function test.
Testing logging tools after maintenance using INSIT Software.
Responsible for open hole and cased hole logging tools schedule maintenance
planning and execution. (As for example –PM1, PM2 and PM3).
DITS/INSITE down hole tools maintenance and trouble
Shooting till component level, Example of open hole tools: SDLT,
BSAT, ACRI, ACRS, WSRA, ICT, XRMM, OMRM, MSFL, DLLS,PTMS, D4TG, PTS, HPS,
DPS, QGS, FPS, FLID and MCS. Example of auxiliary tools: RWCH, HRCH, MCSA,
DTDD, FXIS, FXDS, RCEN, ACNS and CENI, Example of cased hole tools: CBL, CCL,
CAST-F, PLT tools (SONDEX tools: AUH001, CFBM031, CFBM032, CFBM033, CFJM008,
CFSM024, CTF004, FDI001, FDR020, ILS022, PGR020, PKJ013, PRC017, PRC034,
PSJ010, QPC003, QPS019 and free point).
Perform all types of DITS & INSITE tools mechanical section function test.
Maintained all tools maintenance, spare parts and other record by SAP system.
Example: PR05 - Travel Expense Manager, MMBE - Stock Overview, IH08 - Display
Equipment, IW29 - Display Notifications, IW28 - Change Notifications, IW21 -
Create PM Notification – General, MD04 - Display Stock/Requirements Situation,
MB21 - Create Reservation, MB22 - Change Reservation, MB23 - Display
Reservation, MIGO - Goods Movement, ME2N - Purchase Orders by PO Number,
MB51 - Material Doc. List, ME23N - Display Purchase Order, ME2M - Purchase
Orders by Material , MB03 - Display Material Document , ME53N - Display
Purchase Requisition, ME23 - Display Purchase Order, MIGO - Goods Movement,
IW24 - Create PM Malfunction Report , IW25 - Create PM Activity Report, IW26 -
Create Maintenance Request , IW31 - Create Order, IW32 - CHANGE ORDER,
2. IW39 - Display PM orders, IW27 - Set deletion flag f. PM notification, IW34 - PM
Order for PM Notification, IW30 - Notification List (Multi-Level), IW36 - Create PM
Sub-Order, IW37 - Change Operations, IW38 - Change PM Orders, IW40 - Display
Orders (Multi-Level), IW41 - Enter PM Order Confirmation, IW43 - Display PM Order
Confirmation, IW44 - PM Order Collective Confirmation, IW45 - Cancel PM Order
Confirmation, IW46 - Post processing of PDC Error Records, IW47 - Confirmation
List, IW49 - Display Operations, IW58 - Change Service Notifications, CAT2 - Time
Sheet: Maintain Times, ZMQSZ - User Group MM, Query SZ, ZAEX3 - Display AMI
Transfer Document, ZMCL - Material Contact Plant report, IE02 - Change
Equipment, IE07 - Equipment List (Multi-level), ZMR1 - Reservations Report, MB03 -
Display Material Document, IW27 - Set deletion flag f. PM notification.
Responsible for upgrade all NOM and OEB.
Responsible for spare parts inventory and order spare parts for next maintenance.
Good understanding of drilling, logging & perforation operations and processes.
Good understanding of health, safety and environment policies in the oil and gas
industry.
Effective communication skills and a team player.
Quick adaptation to job specific roles or trainings under professional mentoring
processes in place and a culture of team work.
RDT – (HPS, DPS, QGS, FPS, FLID & MCS).
PM1 and Post job service.
PM2 and PM3 maintenance.
Fault finding & trouble shooting.
Function test using insit software.
Parameters data analyses and record keeping.
Participate in unplanned maintenance.
Calliper Tools – (SDLM, MSFM, ICT, OMRM & XRMM)
PM1 and Post job service.
PM2 and PM3 maintenance.
Fault finding & trouble shooting.
Function test using insit software.
Parameters data analyses and record keeping.
Participate in unplanned maintenance.
SONDEX Tools
PM1 and Post job service.
PM2 and PM3 maintenance.
Fault finding & trouble shooting.
Function test.
Parameters data analyses and record keeping.
Participate in unplanned maintenance.
Auxiliary Tools – (RWCH, MCSA, DTDD, FXIS, FXDS, RCEN & CENI)
PM1 and Post job service.
PM2 and PM3 maintenance.
Fault finding & trouble shooting.
Parameters data analyses and record keeping.
Participate in unplanned maintenance.
3. Vacuum System
Operate vacuum system.
Vacuum tool and oil fill.
Vacuum system maintenance.
Test box
Text tool using test box (Example: RDT test box, SDLM, MSFM, OMRM, XRMM and
cast test box.
Test box maintenance.
Training course: Personal Protective Equipment (PPE).
Duration: 12th May, 2014 – (2 Hours).
Training Location: Halliburton University.
Company: Halliburton International Inc. Bangladesh.
Training course: Radiation General Awareness
Duration: 27th Aug, 2013 – (2 Hours).
Training Location: Halliburton University.
Company: Halliburton International Inc. Bangladesh.
Training course: Shell Halliburton Life Saving Rules.
Duration: 04th Sep, 2013 – (1.5 Hours).
Training Location: Halliburton University.
Company: Halliburton International Inc. Bangladesh.
Training course: Substance Abuse Drug Free Workplace.
Duration: 04th Sep, 2013 – (2 Hours).
Training Location: Halliburton University.
Company: Halliburton International Inc. Bangladesh.
Training course: Wireline and Perforating Red Zone Safety.
Duration: 19th Sep, 2013 – (2.5 Hours).
Training Location: Halliburton University.
Company: Halliburton International Inc. Bangladesh.
Training course: Hazard Communication.
Duration: 04th Sep, 2013 – (2 Hours).
Training Location: Halliburton University.
Company: Halliburton International Inc. Bangladesh.
Training course: Halliburton Dropped Objects Training.
Duration: 03rd Apr, 2014 – (2 Hours).
Training Location: Halliburton University.
Company: Halliburton International Inc. Bangladesh.
4. Training course: Explosive General Awareness.
Duration: 06th Sep, 2013 – (2 Hours).
Training Location: Halliburton University.
Company: Halliburton International Inc. Bangladesh.
Training course: Ergonomics General Awareness.
Duration: 03rd Sep, 2013 – (2 Hours).
Training Location: Halliburton University.
Company: Halliburton International Inc. Bangladesh.
Training course: Environmental Awareness.
Duration: 28th Aug, 2013 – (2 Hours).
Training Location: Halliburton University.
Company: Halliburton International Inc. Bangladesh.
Training course: Blood borne Pathogens.
Duration: 1st Sep, 2013 – (2 Hours).
Training Location: Halliburton University.
Company: Halliburton International Inc. Bangladesh.