Collège ste thérèse (french) school presentation
•
3 likes•224 views
The document discusses a technology class where students worked on various software programs and coding with Scratch. They completed projects like a bridge project and greenhouse design. Students learned skills like 3D modeling with Sketchup, circuit programming, and workshop skills like cutting, welding, and assembling. They entered a regional contest to present their finished greenhouse project, which used technologies like solar panels, automated curtains and fans.
Report
Share
Report
Share
Recommended
Caddcentre certificate qu-mx_nzeymze4mditmte3oa== (1)
Amit Singh completed a course on Revit MEP at CADD Centre Training Services in Jamshedpur, India in March 2017. The course covered topics such as software introduction, family creation, HVAC, electrical, plumbing, and fire protection system design in Revit MEP. It also included work sharing, schedules, documentation, sheet setting, and an independent project with expert assistance. Niraj Kumar Singh verified Amit Singh's certificate for the Revit MEP course on January 23, 2018.
Rules for Network Construction
The document discusses rules for constructing network diagrams that represent project operations. Some key rules include: arrows represent activities and circles represent events; networks flow from left to right with activities only starting once all preceding activities are complete; each activity must start and end at a circle; event numbers increase from tail to head; networks can only have one initial and one terminal node; dummy and parallel activities are not permitted; and looping or burst events are also not allowed.
caddcentre_certificate
This document is a certificate from November 2015 certifying that Sridhar Chowbina.R completed a course on Revit MEP at CADD Centre Training Services in Bangalore, India. The course covered topics such as project setup, family creation, HVAC system design, electrical system design, plumbing, fire protection, documentation, and an independent project. Sridhar is certified in the use of Revit MEP software for mechanical, electrical, and plumbing design.
caddcentre_certificate-QTE2MDg0NDM5My02MTA=
This certificate verifies that Subodh Ashok Bansode completed a course on AutoCAD Electrical in August 2016 taught by CADD Centre Training Services. The course covered topics such as working with projects in AutoCAD Electrical, creating schematic symbols and circuits, working with PLC ladders and I/O diagrams, wiring design, components, reports generation, and a final independent project with expert assistance. Ganesh Patil certified that Subodh Ashok Bansode completed the AutoCAD Electrical course on August 27, 2016.
Self Initiative School Activity Multan Town Apr-13
This document summarizes a marketing activity held at schools in Multan, Pakistan to promote a product called Peki. Over 5 days, the activity was held at 5 schools with approximately 2,600 students aged 3-7 participating. A total of 2,220 units were sold generating 22,200 in sales. Student and teacher feedback on the activity was positive, praising it as engaging and a good break for students. Expenses totaled 6,320 resulting in a shortfall of 1,680. The event organizer thanked those involved for their support in executing the successful outreach program.
School board presentation
École Riverside School presented to the trustees of the SDML on November 12, 2013. The principal, Rob Fisher, discussed initiatives at the school focused on social justice, making a difference in the world, and infusing technology into the curriculum through peer-to-peer learning projects. One such project was called "It's our backyard too!" where students researched and took action on an issue, then presented to their peers. The school was also using reflective practice and seed grants to fund projects like QR coding books so students could record their thoughts and a smarter use of Smartboards in the classroom. Test results showed 91% of students were meeting expectations in their learning.
Baras national high schoo lpowerpoint
The document contains questions about the origin of baseball, the continent where Egypt is located, the primary color of a circle, items not included in a group, and solving a basic math equation to find the value of x.
Rajshree school activity(Rajasthan Film Festival)
Rajasthan film festival (RFF) is the largest film festival Awards Show in Jaipur Rajasthan, India. It gives a best platform to filmmakers and artists
Recommended
Caddcentre certificate qu-mx_nzeymze4mditmte3oa== (1)
Amit Singh completed a course on Revit MEP at CADD Centre Training Services in Jamshedpur, India in March 2017. The course covered topics such as software introduction, family creation, HVAC, electrical, plumbing, and fire protection system design in Revit MEP. It also included work sharing, schedules, documentation, sheet setting, and an independent project with expert assistance. Niraj Kumar Singh verified Amit Singh's certificate for the Revit MEP course on January 23, 2018.
Rules for Network Construction
The document discusses rules for constructing network diagrams that represent project operations. Some key rules include: arrows represent activities and circles represent events; networks flow from left to right with activities only starting once all preceding activities are complete; each activity must start and end at a circle; event numbers increase from tail to head; networks can only have one initial and one terminal node; dummy and parallel activities are not permitted; and looping or burst events are also not allowed.
caddcentre_certificate
This document is a certificate from November 2015 certifying that Sridhar Chowbina.R completed a course on Revit MEP at CADD Centre Training Services in Bangalore, India. The course covered topics such as project setup, family creation, HVAC system design, electrical system design, plumbing, fire protection, documentation, and an independent project. Sridhar is certified in the use of Revit MEP software for mechanical, electrical, and plumbing design.
caddcentre_certificate-QTE2MDg0NDM5My02MTA=
This certificate verifies that Subodh Ashok Bansode completed a course on AutoCAD Electrical in August 2016 taught by CADD Centre Training Services. The course covered topics such as working with projects in AutoCAD Electrical, creating schematic symbols and circuits, working with PLC ladders and I/O diagrams, wiring design, components, reports generation, and a final independent project with expert assistance. Ganesh Patil certified that Subodh Ashok Bansode completed the AutoCAD Electrical course on August 27, 2016.
Self Initiative School Activity Multan Town Apr-13
This document summarizes a marketing activity held at schools in Multan, Pakistan to promote a product called Peki. Over 5 days, the activity was held at 5 schools with approximately 2,600 students aged 3-7 participating. A total of 2,220 units were sold generating 22,200 in sales. Student and teacher feedback on the activity was positive, praising it as engaging and a good break for students. Expenses totaled 6,320 resulting in a shortfall of 1,680. The event organizer thanked those involved for their support in executing the successful outreach program.
School board presentation
École Riverside School presented to the trustees of the SDML on November 12, 2013. The principal, Rob Fisher, discussed initiatives at the school focused on social justice, making a difference in the world, and infusing technology into the curriculum through peer-to-peer learning projects. One such project was called "It's our backyard too!" where students researched and took action on an issue, then presented to their peers. The school was also using reflective practice and seed grants to fund projects like QR coding books so students could record their thoughts and a smarter use of Smartboards in the classroom. Test results showed 91% of students were meeting expectations in their learning.
Baras national high schoo lpowerpoint
The document contains questions about the origin of baseball, the continent where Egypt is located, the primary color of a circle, items not included in a group, and solving a basic math equation to find the value of x.
Rajshree school activity(Rajasthan Film Festival)
Rajasthan film festival (RFF) is the largest film festival Awards Show in Jaipur Rajasthan, India. It gives a best platform to filmmakers and artists
Yasin ÇAPAR - Portfoilo
This document provides a summary of Yasin Capar's portfolio, which includes undergraduate projects, personal projects, and customer projects involving mechanical design and engineering. Some of the key projects mentioned are the design of an air deflector machine, a thermoelectric module to generate energy from heat differences, a 3D printer, structural staircases, a concrete crane machine, and a CPU air cooling system. For each project, Yasin completed computer-aided design of parts, assembly, and engineering analysis including structural, thermal and frequency simulations.
Slides Apde2002 Enhance
The document discusses the ENHANCE project which aims to define common working methods for the European aeronautics industry. It outlines the goals and features of the project including establishing standards and improving competitiveness. It then describes some of the technical work packages and experiments conducted including developing digital product masters, evaluating data exchange formats like STEP, and implementing workflow systems. The conclusion discusses feedback on standards and promoting the results through an upcoming forum conference.
An Introduction to Electronics Cooling
This presentation dives into the basics of electronics cooling and demonstrates how engineering simulation software, like SimScale, can help evaluate electronics cooling performance. Additionally, it covers topics like accuracy, accessibility & pre-processing. Learn how computational fluid dynamics and thermal analysis can address issues of thermal management and help engineers optimize designs quickly.
What Is Heat Transfer?: https://bit.ly/3tARTwa
What is CFD | Computational Fluid Dynamics?: https://bit.ly/3lwhrrj
What Are the Navier-Stokes Equations?: https://bit.ly/3qYSKVz
How To Calculate Heat Dissipation In Watts?: https://bit.ly/3s4cLeG
Slope Final Review Meeting - WP3
The document summarizes the work done for Task 3.4 of the SLOPE project. An intelligent processor head was developed that can perform grading and marking of logs. Sensors were added to measure stress waves, cutting forces, near infrared spectra and hyperspectral images. The processor head can determine wood properties and mark each log with an RFID tag containing collected information. All systems were designed, implemented and tested on the processor head prototype, fulfilling the objectives of the task.
Temperature monitoring system
This document outlines a temperature monitoring system that includes sensors to collect temperature data, transmit it to the cloud, and display it on a user dashboard. It allows users to control connected devices like fans from the dashboard. The system aims to provide an end-to-end solution for collecting sensor data and visualizing or acting on it remotely. It also discusses revenue models including freemium options and subscriptions, as well as future enhancements like integrating additional sensors and control capabilities.
Alex Lull -- Portfolio
Alex Lull's mechanical engineering portfolio summarizes several projects demonstrating skills in areas like thermodynamics, design, programming, and fabrication. Projects include designing a power generation system using waste heat from steel mills, creating an attachment to help wheelchair athletes, conducting research on hydraulic fracturing, performing failure analysis, building an oscillating air engine, programming a robot to navigate a maze, designing audio equipment, and developing a Simon game using an FPGA board. The portfolio shows strengths in problem solving, modeling, electronics, and gaining experience through practical applications of mechanical engineering principles.
Laser Scanning SOQ.PDF
Magnasoft is an international geospatial and 3D laser scanning services company that leverages technology, domain knowledge, and work processes to deliver high quality data to clients worldwide. It has over 350 global clients, 600 associates, and centers of excellence in 65+ countries. Magnasoft offers as-built 3D modeling services for structures, equipment, HVAC, piping, electrical, and instrumentation using software like AutoCAD, Revit, CADWorx, PDMS, and Microstation. It captures laser scan and photographic data and creates 3D models, drawings, and other deliverables for industries like oil and gas, process, shipbuilding, airports and more.
Electronics engineering CDR Sample
If you are an electronics engineer and want to migrate to Australia to seek better career prospects or a new job in your domain, then you can prepare a CDR sample for electronics engineer according to the Migration Skills booklet prepared by Engineers Australia. The Electronics Engineers from overseas with a wish to enhance their career in Australia are required to go through a CDR assessment by EA to get selected in the employment code: ANZSCO 233411.
CDR sample for Electronics Engineers includes all the required reports such as Curriculum Vitae (CV), Continuing Professional Development (CPD), three Career Episodes (CE), and Summary Statement.
Caleb Vanderpleog Resume and Academic Summary
Caleb Vanderploeg is a mechanical engineer with experience in video editing, mechanical engineering, machining, and tutoring. He graduated from Arizona State University with a 3.9 GPA and a Bachelor's degree in mechanical engineering. His experience includes working as a video editor at WireBuzz LLC, a mechanical engineering intern at GoPro Inc., a machinist at Division Design, Engineer, Machine LLC, and a tutor at Varsity Tutoring. He has extensive experience with CAD software such as SolidWorks and Creo, as well as simulation software including ANSYS and Simulink. His academic projects include designing a wind turbine gearbox and a camera gimbal system. He also has experience performing finite element
Power Meter
Team 3 created a power meter device that displays energy usage statistics on a graphical interface to help users save time and money. They used a combination of agile and traditional project management for the new design. The team utilized an FPGA, Nios II, software, IP blocks, and outsourced consultants. Version control was done with TortoiseSVN and the code was organized into directories for C code, RTL code, documentation, and more. The team successfully interfaced the power monitoring chip with the FPGA and displayed data on an LCD but struggled with some interfaces and documentation.
COMIT March 2017 - Cost Effective Digitisation of Existing Assets
Presentation by Graham Cameron of GSK on cost effective digitisation of existing assets. Presented at the COMIT community day held at Bentley in London, 2nd March 2017
Software Architecture in Process Automation: UML & the "Smart Factory"
Distributed control systems are currently evolving towards Industrial Internet-of-Things (IIoT) systems. Still, they still suffer from complex commissioning processes that incur high costs. Researchers have proposed several so-called ''Plug and Produce'' (PnP) approaches, where commissioning shall be largely automated, but they have suffered from semantic ambiguities and usually rely on proprietary information models. We propose a novel reference architecture for PnP in IIoT systems, which is based on OPC UA and PLCopen standards and can reduce industrial device commissioning times across vendor products to a few seconds. Our proof-of-concept implementation can handle more than 500 signals per millisecond during runtime, sufficient for most application scenarios.
11 adv revision_notes_term_3
3D printing uses additive manufacturing by laying down material in layers to build an object. It allows objects to be created without molds or dies. There are different types of 3D printing including stereolithography, selective laser sintering, and fused deposition modeling which use different materials and processes. 3D printing involves modeling the object digitally, setting up the print, and then printing it layer by layer. Common materials used are PLA and ABS plastics. Basic electronic and circuitry concepts are also introduced such as voltage, current, resistance, batteries, resistors, diodes, LEDs, and motors.
Engineering Portfolio
The document describes various projects Frank Iattarelli has worked on from 2012 to present. They include a 3D dust printer, CNC name plaque, qualification line, cable cutting guide, helical wire guide, and more. The projects utilized various manufacturing methods like SolidWorks, CNC milling, manual machining, 3D printing, and more. Most projects were designed and built to learn new skills, solve problems, or create functional prototypes.
Basics of autocad
This document provides an overview of AutoCAD, a commercial computer-aided design software. It discusses the history and applications of AutoCAD, including its use in architecture, engineering, graphic design, 3D printing, fashion, and industrial design. The document also outlines some of AutoCAD's key features such as storage and accessibility of files, 3D viewing capabilities, efficient revisions and modifications, speed, and accuracy of dimensions. Autodesk has developed several vertical programs built on the AutoCAD platform for specialized uses.
The Role of CFD in Real Life Designs
This paper relates two heat sinks, a medical suction device, a household oven, and an industrial control valve as examples
that illustrate how SolidWorks® Flow Simulation can help design engineers create the best possible product designs
when dealing with heat transfer and fluid flow problems. SolidWorks Flow Simulation is an intelligent, easy-to-use
computational fluid dynamics (CFD) program that will facilitate the work of design engineers who use SolidWorks 3D
CAD software for design creation.
Walk through Streaming Technologies: EPL
The document discusses event processing using the Esper engine and Event Processing Language (EPL). It provides an overview of Esper's features for efficient event processing, extensibility as middleware, rich user interface, and high availability. The document then demonstrates EPL using a running example of detecting fires based on sensor data. It shows how to define event types, register queries, use various window types, and detect patterns with temporal operators.
Autocadtraininginchandigarh 140629032743-phpapp01
This document discusses AutoCAD training provided by CADTech. It begins with an overview of AutoCAD and the industries that use it, including automobiles, machinery, electronics, plastics, and construction. It then lists the types of AutoCAD training available for different engineering fields. The document describes CADTech's training facilities, curriculum, and experienced faculty. It provides contact information for inquiries about their AutoCAD training programs.
AutoCAD 2020 Toolsets
The document discusses several specialized toolsets available to AutoCAD subscribers, including toolsets for architecture, electrical, mechanical, MEP, plant 3D, and raster design. It provides brief descriptions of the types of intelligent objects, automation capabilities, and time savings each toolset provides for its industry compared to basic AutoCAD functions. Studies showed productivity gains of up to 95% for the electrical toolset and 60% for the architecture toolset when performing common design tasks.
Design Resume 1.3
Stephen Chun has experience in mechanical engineering and design. He received a Bachelor of Science in Mechanical Engineering from the University of California, San Diego in June 2014. Currently, he works as a Mechanical Design Engineer at Skyfront Inc. where he designed a hybrid engine allowing a quadcopter to fly for over 3 hours. Previously, he has interned at Techstars Accelerator – Qualcomm Ventures Incubator and worked on various mechanical engineering projects including a robot that used IP to scan and spray paint 3D objects. He also has experience in product design and entrepreneurship from working on a startup called Nutlockers. His skills include CAD, C++, MATLAB, and controls systems.
A Free 200-Page eBook ~ Brain and Mind Exercise.pptx
(A Free eBook comprising 3 Sets of Presentation of a selection of Puzzles, Brain Teasers and Thinking Problems to exercise both the mind and the Right and Left Brain. To help keep the mind and brain fit and healthy. Good for both the young and old alike.
Answers are given for all the puzzles and problems.)
With Metta,
Bro. Oh Teik Bin 🙏🤓🤔🥰
More Related Content
Similar to Collège ste thérèse (french) school presentation
Yasin ÇAPAR - Portfoilo
This document provides a summary of Yasin Capar's portfolio, which includes undergraduate projects, personal projects, and customer projects involving mechanical design and engineering. Some of the key projects mentioned are the design of an air deflector machine, a thermoelectric module to generate energy from heat differences, a 3D printer, structural staircases, a concrete crane machine, and a CPU air cooling system. For each project, Yasin completed computer-aided design of parts, assembly, and engineering analysis including structural, thermal and frequency simulations.
Slides Apde2002 Enhance
The document discusses the ENHANCE project which aims to define common working methods for the European aeronautics industry. It outlines the goals and features of the project including establishing standards and improving competitiveness. It then describes some of the technical work packages and experiments conducted including developing digital product masters, evaluating data exchange formats like STEP, and implementing workflow systems. The conclusion discusses feedback on standards and promoting the results through an upcoming forum conference.
An Introduction to Electronics Cooling
This presentation dives into the basics of electronics cooling and demonstrates how engineering simulation software, like SimScale, can help evaluate electronics cooling performance. Additionally, it covers topics like accuracy, accessibility & pre-processing. Learn how computational fluid dynamics and thermal analysis can address issues of thermal management and help engineers optimize designs quickly.
What Is Heat Transfer?: https://bit.ly/3tARTwa
What is CFD | Computational Fluid Dynamics?: https://bit.ly/3lwhrrj
What Are the Navier-Stokes Equations?: https://bit.ly/3qYSKVz
How To Calculate Heat Dissipation In Watts?: https://bit.ly/3s4cLeG
Slope Final Review Meeting - WP3
The document summarizes the work done for Task 3.4 of the SLOPE project. An intelligent processor head was developed that can perform grading and marking of logs. Sensors were added to measure stress waves, cutting forces, near infrared spectra and hyperspectral images. The processor head can determine wood properties and mark each log with an RFID tag containing collected information. All systems were designed, implemented and tested on the processor head prototype, fulfilling the objectives of the task.
Temperature monitoring system
This document outlines a temperature monitoring system that includes sensors to collect temperature data, transmit it to the cloud, and display it on a user dashboard. It allows users to control connected devices like fans from the dashboard. The system aims to provide an end-to-end solution for collecting sensor data and visualizing or acting on it remotely. It also discusses revenue models including freemium options and subscriptions, as well as future enhancements like integrating additional sensors and control capabilities.
Alex Lull -- Portfolio
Alex Lull's mechanical engineering portfolio summarizes several projects demonstrating skills in areas like thermodynamics, design, programming, and fabrication. Projects include designing a power generation system using waste heat from steel mills, creating an attachment to help wheelchair athletes, conducting research on hydraulic fracturing, performing failure analysis, building an oscillating air engine, programming a robot to navigate a maze, designing audio equipment, and developing a Simon game using an FPGA board. The portfolio shows strengths in problem solving, modeling, electronics, and gaining experience through practical applications of mechanical engineering principles.
Laser Scanning SOQ.PDF
Magnasoft is an international geospatial and 3D laser scanning services company that leverages technology, domain knowledge, and work processes to deliver high quality data to clients worldwide. It has over 350 global clients, 600 associates, and centers of excellence in 65+ countries. Magnasoft offers as-built 3D modeling services for structures, equipment, HVAC, piping, electrical, and instrumentation using software like AutoCAD, Revit, CADWorx, PDMS, and Microstation. It captures laser scan and photographic data and creates 3D models, drawings, and other deliverables for industries like oil and gas, process, shipbuilding, airports and more.
Electronics engineering CDR Sample
If you are an electronics engineer and want to migrate to Australia to seek better career prospects or a new job in your domain, then you can prepare a CDR sample for electronics engineer according to the Migration Skills booklet prepared by Engineers Australia. The Electronics Engineers from overseas with a wish to enhance their career in Australia are required to go through a CDR assessment by EA to get selected in the employment code: ANZSCO 233411.
CDR sample for Electronics Engineers includes all the required reports such as Curriculum Vitae (CV), Continuing Professional Development (CPD), three Career Episodes (CE), and Summary Statement.
Caleb Vanderpleog Resume and Academic Summary
Caleb Vanderploeg is a mechanical engineer with experience in video editing, mechanical engineering, machining, and tutoring. He graduated from Arizona State University with a 3.9 GPA and a Bachelor's degree in mechanical engineering. His experience includes working as a video editor at WireBuzz LLC, a mechanical engineering intern at GoPro Inc., a machinist at Division Design, Engineer, Machine LLC, and a tutor at Varsity Tutoring. He has extensive experience with CAD software such as SolidWorks and Creo, as well as simulation software including ANSYS and Simulink. His academic projects include designing a wind turbine gearbox and a camera gimbal system. He also has experience performing finite element
Power Meter
Team 3 created a power meter device that displays energy usage statistics on a graphical interface to help users save time and money. They used a combination of agile and traditional project management for the new design. The team utilized an FPGA, Nios II, software, IP blocks, and outsourced consultants. Version control was done with TortoiseSVN and the code was organized into directories for C code, RTL code, documentation, and more. The team successfully interfaced the power monitoring chip with the FPGA and displayed data on an LCD but struggled with some interfaces and documentation.
COMIT March 2017 - Cost Effective Digitisation of Existing Assets
Presentation by Graham Cameron of GSK on cost effective digitisation of existing assets. Presented at the COMIT community day held at Bentley in London, 2nd March 2017
Software Architecture in Process Automation: UML & the "Smart Factory"
Distributed control systems are currently evolving towards Industrial Internet-of-Things (IIoT) systems. Still, they still suffer from complex commissioning processes that incur high costs. Researchers have proposed several so-called ''Plug and Produce'' (PnP) approaches, where commissioning shall be largely automated, but they have suffered from semantic ambiguities and usually rely on proprietary information models. We propose a novel reference architecture for PnP in IIoT systems, which is based on OPC UA and PLCopen standards and can reduce industrial device commissioning times across vendor products to a few seconds. Our proof-of-concept implementation can handle more than 500 signals per millisecond during runtime, sufficient for most application scenarios.
11 adv revision_notes_term_3
3D printing uses additive manufacturing by laying down material in layers to build an object. It allows objects to be created without molds or dies. There are different types of 3D printing including stereolithography, selective laser sintering, and fused deposition modeling which use different materials and processes. 3D printing involves modeling the object digitally, setting up the print, and then printing it layer by layer. Common materials used are PLA and ABS plastics. Basic electronic and circuitry concepts are also introduced such as voltage, current, resistance, batteries, resistors, diodes, LEDs, and motors.
Engineering Portfolio
The document describes various projects Frank Iattarelli has worked on from 2012 to present. They include a 3D dust printer, CNC name plaque, qualification line, cable cutting guide, helical wire guide, and more. The projects utilized various manufacturing methods like SolidWorks, CNC milling, manual machining, 3D printing, and more. Most projects were designed and built to learn new skills, solve problems, or create functional prototypes.
Basics of autocad
This document provides an overview of AutoCAD, a commercial computer-aided design software. It discusses the history and applications of AutoCAD, including its use in architecture, engineering, graphic design, 3D printing, fashion, and industrial design. The document also outlines some of AutoCAD's key features such as storage and accessibility of files, 3D viewing capabilities, efficient revisions and modifications, speed, and accuracy of dimensions. Autodesk has developed several vertical programs built on the AutoCAD platform for specialized uses.
The Role of CFD in Real Life Designs
This paper relates two heat sinks, a medical suction device, a household oven, and an industrial control valve as examples
that illustrate how SolidWorks® Flow Simulation can help design engineers create the best possible product designs
when dealing with heat transfer and fluid flow problems. SolidWorks Flow Simulation is an intelligent, easy-to-use
computational fluid dynamics (CFD) program that will facilitate the work of design engineers who use SolidWorks 3D
CAD software for design creation.
Walk through Streaming Technologies: EPL
The document discusses event processing using the Esper engine and Event Processing Language (EPL). It provides an overview of Esper's features for efficient event processing, extensibility as middleware, rich user interface, and high availability. The document then demonstrates EPL using a running example of detecting fires based on sensor data. It shows how to define event types, register queries, use various window types, and detect patterns with temporal operators.
Autocadtraininginchandigarh 140629032743-phpapp01
This document discusses AutoCAD training provided by CADTech. It begins with an overview of AutoCAD and the industries that use it, including automobiles, machinery, electronics, plastics, and construction. It then lists the types of AutoCAD training available for different engineering fields. The document describes CADTech's training facilities, curriculum, and experienced faculty. It provides contact information for inquiries about their AutoCAD training programs.
AutoCAD 2020 Toolsets
The document discusses several specialized toolsets available to AutoCAD subscribers, including toolsets for architecture, electrical, mechanical, MEP, plant 3D, and raster design. It provides brief descriptions of the types of intelligent objects, automation capabilities, and time savings each toolset provides for its industry compared to basic AutoCAD functions. Studies showed productivity gains of up to 95% for the electrical toolset and 60% for the architecture toolset when performing common design tasks.
Design Resume 1.3
Stephen Chun has experience in mechanical engineering and design. He received a Bachelor of Science in Mechanical Engineering from the University of California, San Diego in June 2014. Currently, he works as a Mechanical Design Engineer at Skyfront Inc. where he designed a hybrid engine allowing a quadcopter to fly for over 3 hours. Previously, he has interned at Techstars Accelerator – Qualcomm Ventures Incubator and worked on various mechanical engineering projects including a robot that used IP to scan and spray paint 3D objects. He also has experience in product design and entrepreneurship from working on a startup called Nutlockers. His skills include CAD, C++, MATLAB, and controls systems.
Similar to Collège ste thérèse (french) school presentation (20)
COMIT March 2017 - Cost Effective Digitisation of Existing Assets
COMIT March 2017 - Cost Effective Digitisation of Existing Assets
Software Architecture in Process Automation: UML & the "Smart Factory"
Software Architecture in Process Automation: UML & the "Smart Factory"
Recently uploaded
A Free 200-Page eBook ~ Brain and Mind Exercise.pptx
(A Free eBook comprising 3 Sets of Presentation of a selection of Puzzles, Brain Teasers and Thinking Problems to exercise both the mind and the Right and Left Brain. To help keep the mind and brain fit and healthy. Good for both the young and old alike.
Answers are given for all the puzzles and problems.)
With Metta,
Bro. Oh Teik Bin 🙏🤓🤔🥰
NIPER 2024 MEMORY BASED QUESTIONS.ANSWERS TO NIPER 2024 QUESTIONS.NIPER JEE 2...
NIPER JEE PYQ
NIPER JEE QUESTIONS
MOST FREQUENTLY ASK QUESTIONS
NIPER MEMORY BASED QUWSTIONS
CapTechTalks Webinar Slides June 2024 Donovan Wright.pptx
Slides from a Capitol Technology University webinar held June 20, 2024. The webinar featured Dr. Donovan Wright, presenting on the Department of Defense Digital Transformation.
HYPERTENSION - SLIDE SHARE PRESENTATION.
IT WILL BE HELPFULL FOR THE NUSING STUDENTS
IT FOCUSED ON MEDICAL MANAGEMENT AND NURSING MANAGEMENT.
HIGHLIGHTS ON HEALTH EDUCATION.
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...Nguyen Thanh Tu Collection
https://app.box.com/s/qspvswamcohjtbvbbhjad04lg65waylfGeography as a Discipline Chapter 1 __ Class 11 Geography NCERT _ Class Notes...
Geography as discipline
Information and Communication Technology in Education
(𝐓𝐋𝐄 𝟏𝟎𝟎) (𝐋𝐞𝐬𝐬𝐨𝐧 2)-𝐏𝐫𝐞𝐥𝐢𝐦𝐬
𝐄𝐱𝐩𝐥𝐚𝐢𝐧 𝐭𝐡𝐞 𝐈𝐂𝐓 𝐢𝐧 𝐞𝐝𝐮𝐜𝐚𝐭𝐢𝐨𝐧:
Students will be able to explain the role and impact of Information and Communication Technology (ICT) in education. They will understand how ICT tools, such as computers, the internet, and educational software, enhance learning and teaching processes. By exploring various ICT applications, students will recognize how these technologies facilitate access to information, improve communication, support collaboration, and enable personalized learning experiences.
𝐃𝐢𝐬𝐜𝐮𝐬𝐬 𝐭𝐡𝐞 𝐫𝐞𝐥𝐢𝐚𝐛𝐥𝐞 𝐬𝐨𝐮𝐫𝐜𝐞𝐬 𝐨𝐧 𝐭𝐡𝐞 𝐢𝐧𝐭𝐞𝐫𝐧𝐞𝐭:
-Students will be able to discuss what constitutes reliable sources on the internet. They will learn to identify key characteristics of trustworthy information, such as credibility, accuracy, and authority. By examining different types of online sources, students will develop skills to evaluate the reliability of websites and content, ensuring they can distinguish between reputable information and misinformation.
How to Setup Default Value for a Field in Odoo 17
In Odoo, we can set a default value for a field during the creation of a record for a model. We have many methods in odoo for setting a default value to the field.
Educational Technology in the Health Sciences
Plenary presentation at the NTTC Inter-university Workshop, 18 June 2024, Manila Prince Hotel.
Recently uploaded (20)
A Free 200-Page eBook ~ Brain and Mind Exercise.pptx
A Free 200-Page eBook ~ Brain and Mind Exercise.pptx
NIPER 2024 MEMORY BASED QUESTIONS.ANSWERS TO NIPER 2024 QUESTIONS.NIPER JEE 2...
NIPER 2024 MEMORY BASED QUESTIONS.ANSWERS TO NIPER 2024 QUESTIONS.NIPER JEE 2...
CapTechTalks Webinar Slides June 2024 Donovan Wright.pptx
CapTechTalks Webinar Slides June 2024 Donovan Wright.pptx
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...
Geography as a Discipline Chapter 1 __ Class 11 Geography NCERT _ Class Notes...
Geography as a Discipline Chapter 1 __ Class 11 Geography NCERT _ Class Notes...
Information and Communication Technology in Education
Information and Communication Technology in Education
220711130097 Tulip Samanta Concept of Information and Communication Technology
220711130097 Tulip Samanta Concept of Information and Communication Technology
220711130088 Sumi Basak Virtual University EPC 3.pptx
220711130088 Sumi Basak Virtual University EPC 3.pptx
Collège ste thérèse (french) school presentation
- 5. Programming of the model with ActiveHome
- 6. Search for information on the internet Use of PowerPoint software to make presentations
- 9. Experiences
- 10. The bridge project Lots of projects
- 13. Team working
- 15. Renewable energy
- 16. 3D towns puzzles
- 17. The green house design project
- 18. 3D presentation of the model with Sketchup software
- 22. We validated the plans by making a first cardboard model
- 23. Taking measurements and cutting with the the scroll saw
- 24. Using the miter saw for making the wooden frame Nailing different parts
- 25. Using the milling machine
- 26. Welding components of some modules Screwing hinges
- 27. Collage of parts with the glue gun
- 29. Engine actuators S0 and S1: curtain control S3: Fan Control Température sensor E3 Humidity sensor A2 Sensors and actuators End of race sensor E0 et E1 engine actuators S6 and S7: control ventilation door Module puissance pour pompe d’arrosage S4
- 30. * Programming of the model through Logicator programming software and programming editor of Picaxe. Then transfer programs in AUTOPROG control unit A4.
- 33. Technical solutions Door rack system Solar panels Fan Water recovery gutter Garden Pump Water pipe Shading curtain Door actuator system
- 34. Finished project
- 36. Projects presentation at a regional contest : Alexis, Erwana et Aymeric
- 37. All classes in the school have an Interactive Whiteboard
- 38. Computer room
- 40. Thank you for watching !