Cisco catalyst 2960x 48 lps-l datasheet
•Download as DOCX, PDF•
0 likes•309 views
The Cisco Catalyst 2960X-48LPS-L is a 1U rack-mountable switch that provides 48 10/100/1000 Ethernet ports with up to 370W of Power over Ethernet Plus budget. It has 4 small form-factor pluggable (SFP) uplink ports, supports stacking of up to 8 switches, and has a switching bandwidth of 216Gbps and forwarding performance of 107.1Mpps.
Report
Share
Report
Share
Recommended
Software Defined Network (SDN) using ASR9000 :: BRKSPG-2722 | San Diego 2015
The document discusses deploying SDN on the Cisco ASR 9000 platform. It provides an overview of SDN drivers, concepts and definitions. It then describes how the ASR 9000 supports SDN through capabilities like BGP-LS, stateful PCEP, OpenFlow, NETCONF/YANG. The rest of the document discusses these protocols and technologies in more detail and provides examples and configurations for SDN on the ASR 9000.
Cisco catalyst 2960x 48 fps-l datasheet
Cisco Catalyst 2960X series 48 ports LAN Base stackable switch delivers Power over Ethernet Plus(PoE+) that supports up to 740W of PoE budget for 24 ports with 30W per port or 48 ports with 15.4W per port.
BaiCells Introduction & Product Introduction-EN-vf-updated
Baicells is a provider of LTE network solutions including small cell equipment and simplified EPC solutions. They have a strong management team with extensive experience from major telecom companies. Baicells offers a full portfolio of indoor and outdoor small cells, CPE devices, and lightweight EPC solutions to provide cost-effective wireless connectivity for a variety of uses cases. They have strategic partnerships with major ODM/OEM suppliers and implement strict quality control processes.
Gigabit Passive Optical Network Presentation
The document describes a project to design and implement a new global network infrastructure for Intelligent Imaging Systems Corporation using a Gigabit Passive Optical Network with a private cloud solution powered by VMware. This will consolidate and converge technologies into a unified system to provide resources and services to every business unit. The solution aims to be highly available, robust, secured, accessible, future-proof, scalable and manageable. It will simplify network management and improve overall performance and efficiency.
Fiber to the Home business model
Describes Innovative Business model for deploying fiber to the home bundled with gas and electric bill
Cisco catalyst 2960x 24 ts-l datasheet
Cisco catalyst 2960X-24TS-L LAN Base Layer 2 stackable switch provides enterprise-class access for campus and branch applications.
Routine maintenance(v600 r003c00 02)
This document provides guidelines for routine maintenance of Huawei NetEngine80E/40E routers, including daily and periodic maintenance items and operations. It describes cleaning the air filters and various components, backing up and restoring configuration files, checking the grounding system, and operations that involve risks. The document aims to help network monitoring, on-site maintenance, and system maintenance engineers properly maintain the routers.
Recommended
Software Defined Network (SDN) using ASR9000 :: BRKSPG-2722 | San Diego 2015
The document discusses deploying SDN on the Cisco ASR 9000 platform. It provides an overview of SDN drivers, concepts and definitions. It then describes how the ASR 9000 supports SDN through capabilities like BGP-LS, stateful PCEP, OpenFlow, NETCONF/YANG. The rest of the document discusses these protocols and technologies in more detail and provides examples and configurations for SDN on the ASR 9000.
Cisco catalyst 2960x 48 fps-l datasheet
Cisco Catalyst 2960X series 48 ports LAN Base stackable switch delivers Power over Ethernet Plus(PoE+) that supports up to 740W of PoE budget for 24 ports with 30W per port or 48 ports with 15.4W per port.
BaiCells Introduction & Product Introduction-EN-vf-updated
Baicells is a provider of LTE network solutions including small cell equipment and simplified EPC solutions. They have a strong management team with extensive experience from major telecom companies. Baicells offers a full portfolio of indoor and outdoor small cells, CPE devices, and lightweight EPC solutions to provide cost-effective wireless connectivity for a variety of uses cases. They have strategic partnerships with major ODM/OEM suppliers and implement strict quality control processes.
Gigabit Passive Optical Network Presentation
The document describes a project to design and implement a new global network infrastructure for Intelligent Imaging Systems Corporation using a Gigabit Passive Optical Network with a private cloud solution powered by VMware. This will consolidate and converge technologies into a unified system to provide resources and services to every business unit. The solution aims to be highly available, robust, secured, accessible, future-proof, scalable and manageable. It will simplify network management and improve overall performance and efficiency.
Fiber to the Home business model
Describes Innovative Business model for deploying fiber to the home bundled with gas and electric bill
Cisco catalyst 2960x 24 ts-l datasheet
Cisco catalyst 2960X-24TS-L LAN Base Layer 2 stackable switch provides enterprise-class access for campus and branch applications.
Routine maintenance(v600 r003c00 02)
This document provides guidelines for routine maintenance of Huawei NetEngine80E/40E routers, including daily and periodic maintenance items and operations. It describes cleaning the air filters and various components, backing up and restoring configuration files, checking the grounding system, and operations that involve risks. The document aims to help network monitoring, on-site maintenance, and system maintenance engineers properly maintain the routers.
NT_N Guard Ring Noise Analysis
The purpose of this report is to provide a detailed example and analysis of a N_TN guard ring structure. This scheme could be used to separate the analogue and digital domains on chip, and thus used for noise attenuation and noise collection.
Furthermore this report will hypothesis additional noise performance improvements that could be made for added noise isolation.
Passive Optical Networks - PON: Customer Case Study, Design, Implementation a...
View all Sessions
Kashif Islam, Solutions Architect , Cisco
Jay Romero, Sr. Director, IT Operations , Erickson Living
Come and learn how Erickson Living achieved deployment success using Cisco ME4600 based GPON Solution. Guest Presenter: Jay Romero, Sr.Director - IT Operations. Passive Optical Networks (PON) provides an effective and efficient way of providing fiber based high speed access to residential and business users. With the ever-growing demand for higher bandwidth, service providers are looking for fiber solutions that are cost-effective and easy to deploy and manage. This session will provide an insight into PON technology, with a focus on Gigabit-Capable PON. Attendees will learn basic design principles and applicable use cases for architecting a GPON Network using the Cisco ME4600 OLT and ONT/ONU. The presentation will outline the requirements to configure and verify an end-to-end service over ME4600 OLT. Redundancy mechanisms, such as Type B protection, in a GPON based environment will also be covered Attendees will walk away from this session with a firm understanding of the GPON technology, a clear view of applicability of GPON vs point-to-point ethernet for varius scenarios and reference designs for an effective, fast and reliable GPON network using Cisco ME4600 series of OLT and ONT products.
MPLS on Router OS V7 - Part 1
Webinar topic: MPLS on Router OS V7 - Part 1
Presenter: Achmad Mardiansyah & M. Taufik Nurhuda
In this webinar series, How MPLS on Router OS V7 works
Please share your feedback or webinar ideas here: http://bit.ly/glcfeedback
Check our schedule for future events: https://www.glcnetworks.com/en/schedule/
Follow our social media for updates: Facebook, Instagram, YouTube Channel, and telegram also discord
Recording available on Youtube
https://youtu.be/SvZrYNA0-rQ
Optical amplifiers
Optical amplifiers like semiconductor optical amplifiers (SOAs), erbium doped fiber amplifiers (EDFAs), and Raman amplifiers are essential for long-haul fiber optic systems by lessening the effects of dispersion and attenuation. SOAs amplify signals bidirectionally but have high coupling loss and noise. EDFAs allow for longer transmission distances by amplifying light using erbium-doped fiber and laser pumps. They are used as in-line and power amplifiers and preamplifiers to enhance receiver sensitivity. Modern networks require wideband hybrid amplifiers for many wavelength channels.
Alcatel Lucent Gpon Technology Training 2
This document provides an overview of Alcatel-Lucent's 7360 ISAM FX fiber access platform, including its shelf types, board types, and line cards. The 7360 ISAM FX offers various shelf configurations (FX-16, FX-8, FX-4) that can accommodate different mixtures of fiber line cards. It supports both GPON and EPON fiber technologies as well as point-to-point Ethernet services. The document describes the control and line cards available, including high-capacity GPON and 10G PON options. It positions the 7360 ISAM FX as a flexible fiber access platform for residential, business, and mobile backhaul services.
Implications of super channels on CDC ROADM architectures
OFC 2014 Presentation
This study proposes CDC ROADM architecture compatible with emerging DWDM super-channel technology. A real world network model is used to quantify that this architecture requires fewer network components leading to less capital and operational costs.
Huawei GPON Fundamentals
This document provides an overview of GPON (Gigabit-capable Passive Optical Network) technology. It discusses the basic concepts and working principles of PON networks, comparing GPON to other PON standards like EPON. The document also analyzes key GPON standards and specifications, describes the GPON network model reference, and reviews basic GPON performance parameters and network protection modes.
Mikrotik firewall mangle
In this webinar, we started the discussion with the basic concepts of firewall in mikrotik. We then focusing on firewall mangle as it is said in title.
we discussed three most-used mangle action on mikrotik routerOS, they are: mark-packet, mark-connection, mark-routing. each mangle action has its own example case of its usage.
The recording is available on youtube (GLC Networks Channel): https://www.youtube.com/channel/UCI611_IIkQC0rsLWIFIx_yg
Basic Cisco ASA 5506-x Configuration (Firepower)
This document provides instructions for configuring basic network security on a Cisco ASA 5506-x firewall. It outlines requirements for separating networks into an Internet, user, and DMZ segment. It then provides steps to update the ASA software, configure interfaces and security levels, enable internet access via NAT and routing, allow web access to servers on the DMZ, optionally configure DHCP, and optionally redirect traffic to the FirePOWER module. It also includes steps for hardening the device by shutting down unused interfaces, enabling SSH access, and configuring time and logging.
optimazation of standard cell layout
The document discusses various layout optimizations that can be made to standard cells to reduce both internal power and area. These include removing "hammer head" structures to decrease transistor length, moving gate contacts over active areas to reduce transistor height, and reducing source/drain capacitances to decrease dynamic current without impacting speed. Post-layout simulations showed a new D flip-flop design with these optimizations reduced internal power by 20% while maintaining clock-to-Q delay, and improved saturation current by 15-50% while reducing area by 20%.
Enable DPDK and SR-IOV for containerized virtual network functions with zun
Zun is an OpenStack service that manages containers as first-class resources without relying on virtual machines. The document discusses enabling DPDK and SR-IOV support in Zun to accelerate containerized network functions (NFV). It outlines challenges in using containers for NFV and how Zun addresses gaps. Benchmark tests show containers leveraging DPDK and SR-IOV through Zun can achieve near-physical server performance for networking workloads.
Scaling Beyond 100G With 400G and 800G
This document discusses scaling network bandwidth beyond 100G and into the 400G and 800G era. It summarizes the emerging 400G and 800G form factors of CFP8, QSFP-DD, and OSFP. It also outlines the transition from 10/40G switching ports to 25/100G and then to 100/400G ports. The growth of bandwidth needs from 2X per year is driving this transition. Standards like 400G Ethernet are emerging to support these higher speeds. Migration to 25Gbps using SFP28 is presented as the initial step to maximize port density and efficiency within existing infrastructure.
OIF Workshop at NGON & DCI World 2022
OIF experts presented project updates, discussed overcoming implementation challenges through interoperability and open optical networking and disaggregation at NGON & DCI World 2022 held in Barcelona, Spain June 21–23, 2022.
Speakers gave an overview of OIF’s 400ZR work, including results from a recent interoperability demonstration, co-packaging, Common Management Interface Specification (CMIS), common electrical interfaces (112G and 224G) and Transport Software Defined Networking (SDN) Application Program Interface (API).
ACI Hands-on Lab
Cisco® Application Centric Infrastructure (ACI) is an innovative architecture that radically simplifies, optimizes, and accelerates the entire application deployment lifecycle. Cloud, mobility, and big data applications are causing a shift in the data center model. Cisco ACI redefines the power of IT, enabling IT to be more responsive to changing business and application needs, enhancing agility, and adding business value. Cisco ACI delivers a transformational operating model for next-generation data center and cloud applications. This Cisco ACI hands lab will step you through from the ACI Fabric concepts to deployment. • Cisco ACI Overview • ACI Fabric Discovery • ACI Building Basic Network Constructs • ACI Building Policy Filters and Contracts • : Deploying a 3-Tier Application Network Profile • ACI Integrating with VMware • Deploying a Service Graph with Application Network Profile • Exploring Monitoring and Troubleshooting
PON design considerations for FTTH FTTx
The document discusses considerations for designing an EPON network. It covers bandwidth requirements, splitting architecture options including 1-stage and 2-stage splitting, maximum transmission distances depending on splitting ratios, calculating the optical power budget, services that can be provided over EPON including FTTH and FTTB/C, upgrading existing networks, required network nodes and equipment, and cable types.
Gis basics
The document describes a retrofit solution for replacing aging gas-insulated switchgear circuit breakers with a new self-compression circuit breaker model. The retrofit involves installing two adapters to connect the new three-phase circuit breaker to the existing single-phase gas insulated switchgear sections. The retrofit solution lowers maintenance costs and brings the switchgear up to the latest technical standards, while allowing the other components of the gas insulated switchgear to remain in service for their full lifespan. Detailed diagrams and steps are provided to illustrate the retrofit process and components.
Cadence P-cell tutorial
This document provides a tutorial on Cadence SKILL PCELL (parameterized cell). It discusses what a pCell is, advantages of using pCells, how to create a pCell both graphically and textually using SKILL language, safety rules for creating SKILL pCells, and functions for building layout shapes and other elements in a pCell definition. It includes examples of SKILL code for defining a simple pCell and debugging pCells. Appendices provide references for common SKILL functions used in pCells.
Medium Voltage Terminations- up to 42kV.| AKBAR TRADING EST.| mail@akbartradi...
Cold Applied:
• TFTI-TFTO:
Single Core Polymeric Cable Termination - Pre Expanded on Holdout - up to 42kV
• TFTI-TFTO:
Single Core Polymeric Cable Termination - Push On - up to 42kV
Heat Shrinkable:
• IXSU/OXSU:
Uniterm - Terminations for Polymeric Cables - up to
42kV
Uniterm - Terminations for Polymeric Cables - up to
42kV - Selection Guide
• IXSU/OXSU - EPKT Quick Reference Guide
Heat Shrinkable Elbows:
• EPKT:
Heat Shrinkable Termination System for cables up to 36kV
Heat Shrinkable Termination Selection Guide
• RSRB:
Inline Bushing Boots
• RSRB:
Right Angle Bushing Boots
Inline & Right Angle Bushing Boot Selection Guide
Push On Elbows:
• RCAB:
Elastomeric Flexible Bushing Boot - up to 17.5kV ONLY
• RCAB:
Inline Cold Applied Boot - up to 24kV ONLY
• RICS:
Insulated Elbow Adaptors - up to 24kV
Insulated Elbow Adaptors - up to 24kV - Selection Guide
• RSES/RSSS:
Insulated Screened Elbows - 250A - up to 24kV
• RSTI:
Insulated Screened Elbows - 630A - up to 24kV
• RSTI:
Insulated Screened Elbows - 630A - up to 36kV
• RSTI:
Insulated Screened Elbow - Piggyback Coupling System - up to 36kV
GURO MV:
NEW
GUROFLEX Medium Voltage - Cold pour Insulating Compound
Section 4:
Energy Division
http://energy.tycoelectronics.com
OptiXtrans E6600 main slide.pdf
The document summarizes the key features and capabilities of the OptiXtrans E6600 platform:
- It is Huawei's next-generation optical transport platform for enterprises, supporting multiple services including SDH, packet, and OTN.
- It converges 4 services in 1 device and supports interfaces from 2M to 100G.
- It features high integration, huge capacity of over 20T per fiber, intelligent O&M, and simplified network architecture.
Cisco catalyst 3650-24ts-s datasheet
The Cisco Catalyst 3650-24TS-S Switch can stack up to 9 switches with 160 Gbps stack bandwidth. It has 24 Ethernet ports and 4 SFP uplink ports, supports up to 1000 wireless clients, and measures 44.5 cm x 44.5 cm x 4.4 cm. Accessories include stack modules, licenses to upgrade features, and power supplies. It has an IP Base feature set while the similar WS-C3650-24TS-L has a LAN Base feature set.
Cisco catalyst 3850-48t-s datasheet
The document summarizes the specifications of the Cisco WS-C3850-48T-S 48-port Ethernet switch, including that it has 48 10/100/1000 Ethernet ports, supports stacking of up to 9 units, has a forwarding performance of 130.95 million packets per second, and dimensions of 44.5 cm x 44.5 cm x 4.45 cm. Recommended accessories include network modules, power supplies, stacking cables, and license upgrades. It also compares the specifications of the WS-C3850-24T-S and WS-C3850-48T-S models.
More Related Content
What's hot
NT_N Guard Ring Noise Analysis
The purpose of this report is to provide a detailed example and analysis of a N_TN guard ring structure. This scheme could be used to separate the analogue and digital domains on chip, and thus used for noise attenuation and noise collection.
Furthermore this report will hypothesis additional noise performance improvements that could be made for added noise isolation.
Passive Optical Networks - PON: Customer Case Study, Design, Implementation a...
View all Sessions
Kashif Islam, Solutions Architect , Cisco
Jay Romero, Sr. Director, IT Operations , Erickson Living
Come and learn how Erickson Living achieved deployment success using Cisco ME4600 based GPON Solution. Guest Presenter: Jay Romero, Sr.Director - IT Operations. Passive Optical Networks (PON) provides an effective and efficient way of providing fiber based high speed access to residential and business users. With the ever-growing demand for higher bandwidth, service providers are looking for fiber solutions that are cost-effective and easy to deploy and manage. This session will provide an insight into PON technology, with a focus on Gigabit-Capable PON. Attendees will learn basic design principles and applicable use cases for architecting a GPON Network using the Cisco ME4600 OLT and ONT/ONU. The presentation will outline the requirements to configure and verify an end-to-end service over ME4600 OLT. Redundancy mechanisms, such as Type B protection, in a GPON based environment will also be covered Attendees will walk away from this session with a firm understanding of the GPON technology, a clear view of applicability of GPON vs point-to-point ethernet for varius scenarios and reference designs for an effective, fast and reliable GPON network using Cisco ME4600 series of OLT and ONT products.
MPLS on Router OS V7 - Part 1
Webinar topic: MPLS on Router OS V7 - Part 1
Presenter: Achmad Mardiansyah & M. Taufik Nurhuda
In this webinar series, How MPLS on Router OS V7 works
Please share your feedback or webinar ideas here: http://bit.ly/glcfeedback
Check our schedule for future events: https://www.glcnetworks.com/en/schedule/
Follow our social media for updates: Facebook, Instagram, YouTube Channel, and telegram also discord
Recording available on Youtube
https://youtu.be/SvZrYNA0-rQ
Optical amplifiers
Optical amplifiers like semiconductor optical amplifiers (SOAs), erbium doped fiber amplifiers (EDFAs), and Raman amplifiers are essential for long-haul fiber optic systems by lessening the effects of dispersion and attenuation. SOAs amplify signals bidirectionally but have high coupling loss and noise. EDFAs allow for longer transmission distances by amplifying light using erbium-doped fiber and laser pumps. They are used as in-line and power amplifiers and preamplifiers to enhance receiver sensitivity. Modern networks require wideband hybrid amplifiers for many wavelength channels.
Alcatel Lucent Gpon Technology Training 2
This document provides an overview of Alcatel-Lucent's 7360 ISAM FX fiber access platform, including its shelf types, board types, and line cards. The 7360 ISAM FX offers various shelf configurations (FX-16, FX-8, FX-4) that can accommodate different mixtures of fiber line cards. It supports both GPON and EPON fiber technologies as well as point-to-point Ethernet services. The document describes the control and line cards available, including high-capacity GPON and 10G PON options. It positions the 7360 ISAM FX as a flexible fiber access platform for residential, business, and mobile backhaul services.
Implications of super channels on CDC ROADM architectures
OFC 2014 Presentation
This study proposes CDC ROADM architecture compatible with emerging DWDM super-channel technology. A real world network model is used to quantify that this architecture requires fewer network components leading to less capital and operational costs.
Huawei GPON Fundamentals
This document provides an overview of GPON (Gigabit-capable Passive Optical Network) technology. It discusses the basic concepts and working principles of PON networks, comparing GPON to other PON standards like EPON. The document also analyzes key GPON standards and specifications, describes the GPON network model reference, and reviews basic GPON performance parameters and network protection modes.
Mikrotik firewall mangle
In this webinar, we started the discussion with the basic concepts of firewall in mikrotik. We then focusing on firewall mangle as it is said in title.
we discussed three most-used mangle action on mikrotik routerOS, they are: mark-packet, mark-connection, mark-routing. each mangle action has its own example case of its usage.
The recording is available on youtube (GLC Networks Channel): https://www.youtube.com/channel/UCI611_IIkQC0rsLWIFIx_yg
Basic Cisco ASA 5506-x Configuration (Firepower)
This document provides instructions for configuring basic network security on a Cisco ASA 5506-x firewall. It outlines requirements for separating networks into an Internet, user, and DMZ segment. It then provides steps to update the ASA software, configure interfaces and security levels, enable internet access via NAT and routing, allow web access to servers on the DMZ, optionally configure DHCP, and optionally redirect traffic to the FirePOWER module. It also includes steps for hardening the device by shutting down unused interfaces, enabling SSH access, and configuring time and logging.
optimazation of standard cell layout
The document discusses various layout optimizations that can be made to standard cells to reduce both internal power and area. These include removing "hammer head" structures to decrease transistor length, moving gate contacts over active areas to reduce transistor height, and reducing source/drain capacitances to decrease dynamic current without impacting speed. Post-layout simulations showed a new D flip-flop design with these optimizations reduced internal power by 20% while maintaining clock-to-Q delay, and improved saturation current by 15-50% while reducing area by 20%.
Enable DPDK and SR-IOV for containerized virtual network functions with zun
Zun is an OpenStack service that manages containers as first-class resources without relying on virtual machines. The document discusses enabling DPDK and SR-IOV support in Zun to accelerate containerized network functions (NFV). It outlines challenges in using containers for NFV and how Zun addresses gaps. Benchmark tests show containers leveraging DPDK and SR-IOV through Zun can achieve near-physical server performance for networking workloads.
Scaling Beyond 100G With 400G and 800G
This document discusses scaling network bandwidth beyond 100G and into the 400G and 800G era. It summarizes the emerging 400G and 800G form factors of CFP8, QSFP-DD, and OSFP. It also outlines the transition from 10/40G switching ports to 25/100G and then to 100/400G ports. The growth of bandwidth needs from 2X per year is driving this transition. Standards like 400G Ethernet are emerging to support these higher speeds. Migration to 25Gbps using SFP28 is presented as the initial step to maximize port density and efficiency within existing infrastructure.
OIF Workshop at NGON & DCI World 2022
OIF experts presented project updates, discussed overcoming implementation challenges through interoperability and open optical networking and disaggregation at NGON & DCI World 2022 held in Barcelona, Spain June 21–23, 2022.
Speakers gave an overview of OIF’s 400ZR work, including results from a recent interoperability demonstration, co-packaging, Common Management Interface Specification (CMIS), common electrical interfaces (112G and 224G) and Transport Software Defined Networking (SDN) Application Program Interface (API).
ACI Hands-on Lab
Cisco® Application Centric Infrastructure (ACI) is an innovative architecture that radically simplifies, optimizes, and accelerates the entire application deployment lifecycle. Cloud, mobility, and big data applications are causing a shift in the data center model. Cisco ACI redefines the power of IT, enabling IT to be more responsive to changing business and application needs, enhancing agility, and adding business value. Cisco ACI delivers a transformational operating model for next-generation data center and cloud applications. This Cisco ACI hands lab will step you through from the ACI Fabric concepts to deployment. • Cisco ACI Overview • ACI Fabric Discovery • ACI Building Basic Network Constructs • ACI Building Policy Filters and Contracts • : Deploying a 3-Tier Application Network Profile • ACI Integrating with VMware • Deploying a Service Graph with Application Network Profile • Exploring Monitoring and Troubleshooting
PON design considerations for FTTH FTTx
The document discusses considerations for designing an EPON network. It covers bandwidth requirements, splitting architecture options including 1-stage and 2-stage splitting, maximum transmission distances depending on splitting ratios, calculating the optical power budget, services that can be provided over EPON including FTTH and FTTB/C, upgrading existing networks, required network nodes and equipment, and cable types.
Gis basics
The document describes a retrofit solution for replacing aging gas-insulated switchgear circuit breakers with a new self-compression circuit breaker model. The retrofit involves installing two adapters to connect the new three-phase circuit breaker to the existing single-phase gas insulated switchgear sections. The retrofit solution lowers maintenance costs and brings the switchgear up to the latest technical standards, while allowing the other components of the gas insulated switchgear to remain in service for their full lifespan. Detailed diagrams and steps are provided to illustrate the retrofit process and components.
Cadence P-cell tutorial
This document provides a tutorial on Cadence SKILL PCELL (parameterized cell). It discusses what a pCell is, advantages of using pCells, how to create a pCell both graphically and textually using SKILL language, safety rules for creating SKILL pCells, and functions for building layout shapes and other elements in a pCell definition. It includes examples of SKILL code for defining a simple pCell and debugging pCells. Appendices provide references for common SKILL functions used in pCells.
Medium Voltage Terminations- up to 42kV.| AKBAR TRADING EST.| mail@akbartradi...
Cold Applied:
• TFTI-TFTO:
Single Core Polymeric Cable Termination - Pre Expanded on Holdout - up to 42kV
• TFTI-TFTO:
Single Core Polymeric Cable Termination - Push On - up to 42kV
Heat Shrinkable:
• IXSU/OXSU:
Uniterm - Terminations for Polymeric Cables - up to
42kV
Uniterm - Terminations for Polymeric Cables - up to
42kV - Selection Guide
• IXSU/OXSU - EPKT Quick Reference Guide
Heat Shrinkable Elbows:
• EPKT:
Heat Shrinkable Termination System for cables up to 36kV
Heat Shrinkable Termination Selection Guide
• RSRB:
Inline Bushing Boots
• RSRB:
Right Angle Bushing Boots
Inline & Right Angle Bushing Boot Selection Guide
Push On Elbows:
• RCAB:
Elastomeric Flexible Bushing Boot - up to 17.5kV ONLY
• RCAB:
Inline Cold Applied Boot - up to 24kV ONLY
• RICS:
Insulated Elbow Adaptors - up to 24kV
Insulated Elbow Adaptors - up to 24kV - Selection Guide
• RSES/RSSS:
Insulated Screened Elbows - 250A - up to 24kV
• RSTI:
Insulated Screened Elbows - 630A - up to 24kV
• RSTI:
Insulated Screened Elbows - 630A - up to 36kV
• RSTI:
Insulated Screened Elbow - Piggyback Coupling System - up to 36kV
GURO MV:
NEW
GUROFLEX Medium Voltage - Cold pour Insulating Compound
Section 4:
Energy Division
http://energy.tycoelectronics.com
OptiXtrans E6600 main slide.pdf
The document summarizes the key features and capabilities of the OptiXtrans E6600 platform:
- It is Huawei's next-generation optical transport platform for enterprises, supporting multiple services including SDH, packet, and OTN.
- It converges 4 services in 1 device and supports interfaces from 2M to 100G.
- It features high integration, huge capacity of over 20T per fiber, intelligent O&M, and simplified network architecture.
What's hot (20)
Passive Optical Networks - PON: Customer Case Study, Design, Implementation a...
Passive Optical Networks - PON: Customer Case Study, Design, Implementation a...
Implications of super channels on CDC ROADM architectures
Implications of super channels on CDC ROADM architectures
Enable DPDK and SR-IOV for containerized virtual network functions with zun
Enable DPDK and SR-IOV for containerized virtual network functions with zun
Medium Voltage Terminations- up to 42kV.| AKBAR TRADING EST.| mail@akbartradi...
Medium Voltage Terminations- up to 42kV.| AKBAR TRADING EST.| mail@akbartradi...
Similar to Cisco catalyst 2960x 48 lps-l datasheet
Cisco catalyst 3650-24ts-s datasheet
The Cisco Catalyst 3650-24TS-S Switch can stack up to 9 switches with 160 Gbps stack bandwidth. It has 24 Ethernet ports and 4 SFP uplink ports, supports up to 1000 wireless clients, and measures 44.5 cm x 44.5 cm x 4.4 cm. Accessories include stack modules, licenses to upgrade features, and power supplies. It has an IP Base feature set while the similar WS-C3650-24TS-L has a LAN Base feature set.
Cisco catalyst 3850-48t-s datasheet
The document summarizes the specifications of the Cisco WS-C3850-48T-S 48-port Ethernet switch, including that it has 48 10/100/1000 Ethernet ports, supports stacking of up to 9 units, has a forwarding performance of 130.95 million packets per second, and dimensions of 44.5 cm x 44.5 cm x 4.45 cm. Recommended accessories include network modules, power supplies, stacking cables, and license upgrades. It also compares the specifications of the WS-C3850-24T-S and WS-C3850-48T-S models.
Cisco catalyst 3650-24ps-s datasheet
Cisco Catalyst 3650-24PS-S is the next generation enterprise-level standalone with stackable option switch with IP Base image. WS-C3650-24PS-S has 24 Gigabit Ethernet POE+ ports with 4 fixed 1G SFP uplink ports and provides fully convergence between wired and wireless capacity on a single platform.
Cisco catalyst switching cisco catalyst 2960-s series technical overview
This document provides an overview and comparison of the Cisco Catalyst 2960-S fixed switching solutions. It describes the key features and specifications of the 2960-S including its 24/48 10/100/1000 ports with fixed uplinks, FlexStack stacking technology, full PoE support, low power consumption, and LAN Lite and LAN Base software options. It also compares stacking and other features between the 2960-S and 3750-X series.
cisco-ws-c2960x-48lps-l-datasheet.pdf
The Cisco Catalyst 2960X-48LPS-L switch provides 48 Gigabit Ethernet ports with up to 370W of Power over Ethernet (PoE) for powering devices. It is a 1U rack-mountable switch that can be stacked with up to 8 units and provides 108Gbps of switching bandwidth. The switch has 48 RJ-45 ports, 4 small form-factor pluggable (SFP+) ports, and supports management and monitoring features through its integrated web interface.
Cisco switch catalyst 2960 x datasheet
The document provides specifications for the Cisco Catalyst 2960X switch, including:
- It is a fixed-configuration, stackable Gigabit Ethernet switch with 24 or 48 ports and optional stacking of up to 8 switches.
- It supports up to 740W of Power over Ethernet Plus (PoE+) and has energy efficient features.
- Key features include line-rate performance, SFP/SFP+ uplinks, Cisco IOS software, and security features.
cisco-ws-c2960x-48lps-l-datasheet.pdf
The Cisco Catalyst 2960X-48LPS-L is a 1U rack-mountable switch that provides 48 10/100/1000 Ethernet ports with 370W of Power over Ethernet (PoE+) budget. It has 4 small form-factor pluggable (SFP+) ports for uplinks, 512MB of RAM, 128MB of flash memory, and can stack with up to 8 similar switches. The switch complies with various IEEE networking standards and provides features such as VLAN, QoS, security, and management functions.
cisco-ws-c2960xr-48fps-i-datasheet.pdf
The Cisco Catalyst WS-C2960XR-48FPS-I is a 48-port Gigabit Ethernet switch with a 1U rack-mountable enclosure. It has functional layer 2 and layer 3 features, with a forwarding bandwidth of 108 Gbps, switching bandwidth of 216 Gbps, and 740W of PoE+ power. The switch is designed to offer operational simplicity and enhance network reliability when deployed.
cisco-ws-c2960xr-48lps-i-datasheet.pdf
The Cisco Catalyst WS-C2960XR-48LPS-I is a 1U rack-mountable switch with 48 Gigabit Ethernet ports and 4 SFP uplink ports. It has a forwarding bandwidth of 108Gbps and switching bandwidth of 216Gbps. The switch supports up to 370W of PoE+ power. It has dual field replaceable power supplies for power resiliency and basic layer 2 and 3 switching features. The switch is designed to provide simple functionality and increase network reliability when deployed.
cisco-ws-c2960x-48fps-l-datasheet.pdf
The Cisco Catalyst 2960X-48FPS-L is a 1U rack-mountable switch that provides 48 Gigabit Ethernet ports with 740W of PoE+ power. It has 4 small form-factor pluggable (SFP) uplink ports, 512MB of RAM, and 128MB of flash memory. The switch supports stacking of up to 8 units and has a switching bandwidth of 216Gbps.
cisco-ws-c2960x-48fpd-l-datasheet.pdf
This document provides specifications for the Cisco Catalyst 2960X-48FPD-L 48-port Gigabit Ethernet switch. It has 48 10/100/1000 Ethernet ports with Power over Ethernet Plus (PoE+) support for up to 740W of power. The switch has 2 10G SFP+ uplink ports, is rack-mountable, and can stack with up to 8 of the same switches or 4 mixed 2960-S switches. It provides Layer 2 switching, PoE, security, and management features.
cisco-c9300-24p-e-datasheet.pdf
The document provides product details and specifications for the Cisco Catalyst 9300 Series C9300-24P-E switch. It is a 24-port PoE+ network essentials switch that provides 445W of available PoE power. Key specifications include 24 10/100/1000 copper ports, 8GB of RAM, 16GB of flash memory, and a maximum switching capacity of 208Gbps. It has a 1U rack-mount form factor and weighs 16.33 pounds. The document provides contact information for purchasing and getting additional information about the switch.
cisco-c9300-48p-e-datasheet.pdf
The document provides product details and specifications for the Cisco Catalyst 9300-48P-E switch. It is a 48-port PoE+ switch that is part of Cisco's Catalyst 9300 Series. Key specifications include 48 10/100/1000 copper ports that support PoE+, a 715W default power supply that provides 437W of PoE power, dimensions of 1.73 x 17.5 x 17.5 inches, and a weight of 16.33 pounds. It has high performance capabilities such as a switching capacity of 256Gbps and stacking bandwidth of 480Gbps.
cisco-ws-c2960x-24pd-l-datasheet.pdf
The Cisco Catalyst 2960X-24PD-L is a 24-port rack-mountable switch with 2 10G SFP+ uplink ports and 370W of PoE+ power. It has 24 Gigabit Ethernet ports, 2 10G SFP+ uplink ports, 512MB RAM, and can be stacked with up to 8 additional switches. The switch is 1U in size, has a rack-mountable enclosure, and provides Layer 2 switching functionality with 95.2Mpps of switching performance.
cisco-ws-c2960xr-24ts-i-datasheet.pdf
The Cisco Catalyst 2960XR-24TS-I is a 1U rack-mountable switch with 24 10/100/1000 Ethernet ports and 4 1GbE SFP uplink ports. It has a forwarding bandwidth of 108Gbps and can be stacked with up to 8 additional switches. The switch is IP Lite and has various Layer 2 and basic Layer 3 features such as VLAN, ACLs, QoS, and routing. Accessories include stacking modules, cables, power supplies, and rack mounting kits. Hi-Network provides quotes and sales support for this and other networking equipment.
cisco-c9300-48u-a-datasheet.pdf
The document provides information about the Cisco Catalyst 9300-48U-A switch, including its specifications and features. It is a 48-port UPOE switch with 822W of available PoE power. Key features include Cisco StackWise-480 stacking, 8 GB of DRAM, and support for up to 96 Gbps of wireless bandwidth per switch. It has a 1.73" height and weighs 16.33 pounds. The document also provides contact information for Hi-Network to purchase the switch.
huawei-s5700-28x-pwr-li-ac-brochure-datasheet.pdf
The S5700-28X-PWR-LI-AC is a next-generation energy-saving gigabit enterprise switch developed by Huawei that can be installed in small equipment rooms. It has 24 10/100/1000 Ethernet ports, 4 10GE SFP+ ports, and PoE functionality. The switch is dedicated to helping customers build reliable and secure networks. It has a forwarding performance of 96Mpps and switching capacity of 256Gbps. The switch has a dimensions of 442mm x 220mm x 43.6mm and weighs 6.6kg. It can be powered by AC power and has an operational power consumption of less than 448.8W when using PoE.
cisco-c9300-48p-a-datasheet.pdf
The Cisco Catalyst 9300 Series Switch C9300-48P-A is a 48-port PoE+ network advantage switch. It has 48 10/100/1000 copper ports that provide a total of 437W of PoE power. The switch has a stacking bandwidth of 480Gbps and switching capacity of 256Gbps, making it suitable for high-density deployments. It is optimized for wireless connectivity and security. Customers can contact info@hi-network.com for purchase and support.
Cisco 2960x datasheet and supported sfp modules
Cisco Catalyst 2960-X series switches are fixed-configuration and stackable gigabit ethernet layer 2 and layer 3 access switches, and include configurations to fit in any enterprise network. Here I will mainly introduce the knowledge of 2960-X series switches and compatible SFP modules for it.
cisco-c9300l-48t-4x-e-datasheet.pdf
The Cisco Catalyst 9300L-48T-4X-E is a 48-port network switch with 4 10GbE uplink ports and support for Power over Ethernet (PoE). It provides high performance switching and routing with throughput of up to 176Gbps. The switch has 8GB of RAM, 16GB flash memory, and is designed to replace older Catalyst 3850 models in enterprise networks. It supports advanced features including stacking, quality of service, access control lists, and network monitoring.
Similar to Cisco catalyst 2960x 48 lps-l datasheet (20)
Cisco catalyst switching cisco catalyst 2960-s series technical overview
Cisco catalyst switching cisco catalyst 2960-s series technical overview
Recently uploaded
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays, June 2024 with Maria Copot 20
Generating privacy-protected synthetic data using Secludy and Milvus
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
Climate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Infrastructure Challenges in Scaling RAG with Custom AI models
Building Retrieval-Augmented Generation (RAG) systems with open-source and custom AI models is a complex task. This talk explores the challenges in productionizing RAG systems, including retrieval performance, response synthesis, and evaluation. We’ll discuss how to leverage open-source models like text embeddings, language models, and custom fine-tuned models to enhance RAG performance. Additionally, we’ll cover how BentoML can help orchestrate and scale these AI components efficiently, ensuring seamless deployment and management of RAG systems in the cloud.
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
OpenID AuthZEN Interop Read Out - Authorization
During Identiverse 2024 and EIC 2024, members of the OpenID AuthZEN WG got together and demoed their authorization endpoints conforming to the AuthZEN API
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Taking AI to the Next Level in Manufacturing.pdf
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
Recently uploaded (20)
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Generating privacy-protected synthetic data using Secludy and Milvus
Generating privacy-protected synthetic data using Secludy and Milvus
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift.pdf
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Infrastructure Challenges in Scaling RAG with Custom AI models
Infrastructure Challenges in Scaling RAG with Custom AI models
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
Cisco catalyst 2960x 48 lps-l datasheet
- 1. WS-C2960X-48LPS-L Datasheet Overview (Cisco Catalyst 2960X-48LPS-L) Cisco Catalyst 2960X series 48 ports LAN Base stackable switch delivers Power over Ethernet Plus(PoE+) that supports up to 370W of PoE budget for 12 ports with 30W per port, or 24 ports with 15.4W per port or 48 ports with 7.4W per port. Quick Specs Figure 1 shows the appearance of WS-C2960X-48LPS-L. Table 1 shows the Quick Specs. Product Code WS-C2960X-48LPS-L Enclosure Type Rack-mountable - 1U Feature Set LAN Base Uplink Interfaces 4 x 1G SFP Ports 48 x 10/100/1000 Ethernet Gigabit ports Available PoE Power 370W Maximum stacking number 8 Stack bandwidth 80G Forwarding Performance 107.1Mpps
- 2. Switching Bandwidth 216Gbps RAM 512 MB Flash Memory 128 MB Dimensions 44.5 cm x 36.8 cm x 4.5 cm Package Weight 10.65 Kg Product Details Figure 2 shows the front panel of the Cisco Catalyst 2960X-48LPS-L switch. Note: ① Ethernet management port ⑥ SFP module ports ② Mode button ⑦ 48 x 10/100/1000 ports ③ Switch LEDs ⑧ CONSOLE LED ④ USB mini-Type B (console) port ⑨ MGMT LED ⑤ USB Type A ports ⑩ RJ-45 console port ·The Switch LEDs include SYST, STAT, SPEED, RPS, MAST, POE and STACK LEDs. ·Power over Ethernet Plus(PoE+) supports up to 370W of PoE budget for 12 ports with 30W per port or 24 ports with 15.4W per port or 48 ports with 7.4W per port.
- 3. Figure 3 shows the back panel of the Cisco Catalyst 2960X-48LPS-L switch. Note: ① FlexStack-Plus module slot and cover ③ RPS Connector ② Fan Exhaust ④ AC power connector Figure 4 shows the stackable capacity. This C2960X switch delivers stackable capacity that supports up to 8 switches stacking with same 2960-X LAN base series. It also can stack up to 4 switches stacking when mixed with 2960-S LAN base series switches. The Accessories Table 2 shows some accessories of WS-C2960X-48LPS-L. Models Description
- 4. C2960X-STACK Catalyst 2960-X FlexStack Plus Stacking Module CAB-STK-E-0.5M Cisco FlexStack Stacking Cables GLC-LH-SM GE SFP, LC connector LX/LH transceiver GLC-SX-MMD 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM CAB-CONSOLE-RJ45 Console Cable 6ft with RJ45 and DB9F CAB-CONSOLE-USB Console Cable 6 ft with USB Type A and mini-B Compare to Similar Items Table 3 shows the comparison of similar items. Models WS-C2960X-48LPS-L WS-C2960X-24PS-L Ports 48 x 10/100/1000 Ethernet Gigabit ports 24 x Ethernet 10/100/1000 Gigabit port Uplinks 4 x 1G SFP 4 x 1G SFP Available PoE Power 370W 370W FlexStack-Plus Stacking Optional Optional