Please check all questions included in this final Below
• Question 1
The image below is an example of what type of WAN connection?
• Question 2
Which of the following is a type of coaxial cable? (Choose 2)
• Question 3
Which of the following is a common Layer 2 protocol that could run over a dedicated leased line?
• Question 4
For more classes visit
www.snaptutorial.com
Please check all questions included in this final Below
• Question 1
The image below is an example of what type of WAN connection?
• Question 2
Which of the following is a type of coaxial cable? (Choose 2)
• Question 3
CIS 175 Effective Communication - tutorialrank.comBartholomew19
For more course tutorials visit
www.tutorialrank.com
Please check all questions included in this final Below
• Question 1
The image below is an example of what type of WAN connection?
• Question 2
For more classes visit
www.snaptutorial.com
Please check all questions included in this final Below
• Question 1
The image below is an example of what type of WAN connection?
• Question 2
Which of the following is a type of coaxial cable? (Choose 2)
For more course tutorials visit
www.newtonhelp.com
Please check all questions included in this final Below
• Question 1
The image below is an example of what type of WAN connection?
• Question 2
Which of the following is a type of coaxial cable? (Choose 2)
For more course tutorials visit
www.tutorialrank.com
Please check all questions included in this final Below
• Question 1
The image below is an example of what type of WAN connection?
• Question 2
For more classes visit
www.snaptutorial.com
Please check all questions included in this final Below
• Question 1
The image below is an example of what type of WAN connection?
• Question 2
Which of the following is a type of coaxial cable? (Choose 2)
• Question 3
CIS 175 Effective Communication - tutorialrank.comBartholomew19
For more course tutorials visit
www.tutorialrank.com
Please check all questions included in this final Below
• Question 1
The image below is an example of what type of WAN connection?
• Question 2
For more classes visit
www.snaptutorial.com
Please check all questions included in this final Below
• Question 1
The image below is an example of what type of WAN connection?
• Question 2
Which of the following is a type of coaxial cable? (Choose 2)
For more course tutorials visit
www.newtonhelp.com
Please check all questions included in this final Below
• Question 1
The image below is an example of what type of WAN connection?
• Question 2
Which of the following is a type of coaxial cable? (Choose 2)
For more course tutorials visit
www.tutorialrank.com
Please check all questions included in this final Below
• Question 1
The image below is an example of what type of WAN connection?
• Question 2
This study guide is intended to provide those pursuing the CCNA certification with a framework of what concepts need to be studied. This is not a comprehensive document containing all the secrets of the CCNA, nor is it a “braindump” of questions and answers.
I sincerely hope that this document provides some assistance and clarity in your studies.
PERFORMANCE EVALUATION OF CDMAROUTER FOR NETWORK - ON - CHIPVLSICS Design
This paper presents the performance evaluation of router based on code division multiple access technique (CDMA) for Network-on-Chip (NoC). The design is synthesized using Xilinx Virtex4 XC4VLX200 device. The functional behavior is verified using Modelsim XE III 6.2 C. The delay and throughput values are obtained for variable payload sizes. Throughput-Power and Delay-Power characteristics are also verified for NoC.
The proclaim of this topic is to remind the Loopback addresses in networking. This presentation update the knowledge of network users including to testing the standalone machine (i.e. End user machine) and Network Layer devices (Such as Router , Switches).
Design and implementation of log domain decoder IJECEIAES
Low-Density-Parity-Check (LDPC) code has become famous in communications systems for error correction, as an advantage of the robust performance in correcting errors and the ability to meet all the requirements of the 5G system. However, the mot challenge faced researchers is the hardware implementation, because of higher complexity and long run-time. In this paper, an efficient and optimum design for log domain decoder has been implemented using Xilinx system generator with FPGA device Kintex7 (XC7K325T-2FFG900C). Results confirm that the proposed decoder gives a Bit Error Rate (BER) very closed to theory calculations which illustrate that this decoder is suitable for next generation demand which needs a high data rate with very low BER.
A NOVEL APPROACH FOR LOWER POWER DESIGN IN TURBO CODING SYSTEMVLSICS Design
Low Power is an extremely important issue for future mobile communication systems; The focus of this paper is to implementat turbo codes for low power solutions. The effect on performance due to variation in parameters like frame length, number of iterations, type of encoding scheme and type of the interleave in the presence of additive white Gaussian noise is studied with the floating point model. In order to obtain the effect of quantization and word length variation, a fixed point model of the application is also developed.. The application performance measure, namely bit-error rate (BER) is used as a design constraint while optimizing for power and area coverage. Low power Optimization is Performed on Implementation levels by the use of Voltage scaling. With those Techniques we can reduced the power 98.5%and Area(LUT) is 57% and speed grade is Increased .This type of Power maneger is proposed and implemented based on the timing details of the turbo decoder in the VHDL model.
CIS 175 Imagine Your Future/newtonhelp.com bellflower42
For more course tutorials visit
www.newtonhelp.com
Please check all questions included in this final Below
• Question 1
The image below is an example of what type of WAN connection?
• Question 2
For more course tutorials visit
www.newtonhelp.com
Please check all questions included in this final Below
• Question 1
The image below is an example of what type of WAN connection?
• Question 2
Which of the following is a type of coaxial cable? (Choose 2)
ExamQuestion 1For a network tech, one benefit of understanding.docxcravennichole326
Exam
Question 1
For a network tech, one benefit of understanding the OSI seven-layer model and how traffic in an actual network works through the model is applying this knowledge to _______________ networks.
1 points
Question 2
What device do you need to split a large network into smaller ones?
1 points
Question 3
What is the Network layer unique identifier assigned to each device on a TCP/IP network?
1 points
Question 4
Which TCP/IP model layer uses connection-oriented protocols?
1 points
Question 5
Which layer of the TCP/IP model performs IP addressing functions?
1 points
Question 6
Of the following, which is the fastest category of UTP cabling?
1 points
Question 7
Which kind of cable does not provide any protection against EMI?
1 points
Question 8
Which kind of cable works best for long-distance transmissions?
1 points
Question 9
Most network technologies that use fiber-optics use which type of fiber-optic cables?
1 points
Question 10
What organization provides a variety of industry-wide cabling standards, such as those for serial, parallel, and FireWire?
1 points
Question 11
Which IEEE subcommittee sets the standards for Wireless LAN networks?
1 points
Question 12
At which layer of the OSI model does network cabling belong?
1 points
Question 13
Which connector is used for UTP cabling on a network?
1 points
Question 14
What is the maximum distance between a hub and a node on a 10BaseT network?
1 points
Question 15
What kind of cabling does the 10BaseFL standard specify?
1 points
Question 16
Which of the following is NOT an advantage of fiber-optic cabling over UTP?
1 points
Question 17
How many pairs of pins in an RJ-45 connector does a 10BaseT device actually use?
1 points
Question 18
Which of the following is true of an Ethernet hub?
1 points
Question 19
What basis do bridges use to determine whether to forward traffic?
1 points
Question 20
Of all the Gigabit Ethernet standards detailed in the chapter, which maintains a signal over the greatest distance?
1 points
Question 21
What type of fiber-optic cable is used in a 1000BaseLX network?
1 points
Question 22
What is the most common connector used in a 1000BaseSX network?
1 points
Question 23
The "W" in the standard 10GBaseSW stands for which type of signaling?
1 points
Question 24
The "R" in the standard 10GBaseSR stands for which type of signaling?
1 points
Question 25
What is the solution manufacturers devised to accommodate the need for switches to connect to a variety of 10 GbE connector types?
1 points
Question 26
The problem of modal distortion, involving light bouncing back and forth at a sharp angle as it travels down a cable, is unique to which type of fiber-optic cable?
1 points
Question 27
What network component is built into most PCs today?
1 points
Question 28
What type of connector is used by all UTP Ethernet NICs?
1 points
Question 29
With Windows, what can you .
. What are device types A and B in the exhibit below?
2. Which of the following is a NOT a network category based on the geographical dispersion of network components?
This study guide is intended to provide those pursuing the CCNA certification with a framework of what concepts need to be studied. This is not a comprehensive document containing all the secrets of the CCNA, nor is it a “braindump” of questions and answers.
I sincerely hope that this document provides some assistance and clarity in your studies.
PERFORMANCE EVALUATION OF CDMAROUTER FOR NETWORK - ON - CHIPVLSICS Design
This paper presents the performance evaluation of router based on code division multiple access technique (CDMA) for Network-on-Chip (NoC). The design is synthesized using Xilinx Virtex4 XC4VLX200 device. The functional behavior is verified using Modelsim XE III 6.2 C. The delay and throughput values are obtained for variable payload sizes. Throughput-Power and Delay-Power characteristics are also verified for NoC.
The proclaim of this topic is to remind the Loopback addresses in networking. This presentation update the knowledge of network users including to testing the standalone machine (i.e. End user machine) and Network Layer devices (Such as Router , Switches).
Design and implementation of log domain decoder IJECEIAES
Low-Density-Parity-Check (LDPC) code has become famous in communications systems for error correction, as an advantage of the robust performance in correcting errors and the ability to meet all the requirements of the 5G system. However, the mot challenge faced researchers is the hardware implementation, because of higher complexity and long run-time. In this paper, an efficient and optimum design for log domain decoder has been implemented using Xilinx system generator with FPGA device Kintex7 (XC7K325T-2FFG900C). Results confirm that the proposed decoder gives a Bit Error Rate (BER) very closed to theory calculations which illustrate that this decoder is suitable for next generation demand which needs a high data rate with very low BER.
A NOVEL APPROACH FOR LOWER POWER DESIGN IN TURBO CODING SYSTEMVLSICS Design
Low Power is an extremely important issue for future mobile communication systems; The focus of this paper is to implementat turbo codes for low power solutions. The effect on performance due to variation in parameters like frame length, number of iterations, type of encoding scheme and type of the interleave in the presence of additive white Gaussian noise is studied with the floating point model. In order to obtain the effect of quantization and word length variation, a fixed point model of the application is also developed.. The application performance measure, namely bit-error rate (BER) is used as a design constraint while optimizing for power and area coverage. Low power Optimization is Performed on Implementation levels by the use of Voltage scaling. With those Techniques we can reduced the power 98.5%and Area(LUT) is 57% and speed grade is Increased .This type of Power maneger is proposed and implemented based on the timing details of the turbo decoder in the VHDL model.
CIS 175 Imagine Your Future/newtonhelp.com bellflower42
For more course tutorials visit
www.newtonhelp.com
Please check all questions included in this final Below
• Question 1
The image below is an example of what type of WAN connection?
• Question 2
For more course tutorials visit
www.newtonhelp.com
Please check all questions included in this final Below
• Question 1
The image below is an example of what type of WAN connection?
• Question 2
Which of the following is a type of coaxial cable? (Choose 2)
ExamQuestion 1For a network tech, one benefit of understanding.docxcravennichole326
Exam
Question 1
For a network tech, one benefit of understanding the OSI seven-layer model and how traffic in an actual network works through the model is applying this knowledge to _______________ networks.
1 points
Question 2
What device do you need to split a large network into smaller ones?
1 points
Question 3
What is the Network layer unique identifier assigned to each device on a TCP/IP network?
1 points
Question 4
Which TCP/IP model layer uses connection-oriented protocols?
1 points
Question 5
Which layer of the TCP/IP model performs IP addressing functions?
1 points
Question 6
Of the following, which is the fastest category of UTP cabling?
1 points
Question 7
Which kind of cable does not provide any protection against EMI?
1 points
Question 8
Which kind of cable works best for long-distance transmissions?
1 points
Question 9
Most network technologies that use fiber-optics use which type of fiber-optic cables?
1 points
Question 10
What organization provides a variety of industry-wide cabling standards, such as those for serial, parallel, and FireWire?
1 points
Question 11
Which IEEE subcommittee sets the standards for Wireless LAN networks?
1 points
Question 12
At which layer of the OSI model does network cabling belong?
1 points
Question 13
Which connector is used for UTP cabling on a network?
1 points
Question 14
What is the maximum distance between a hub and a node on a 10BaseT network?
1 points
Question 15
What kind of cabling does the 10BaseFL standard specify?
1 points
Question 16
Which of the following is NOT an advantage of fiber-optic cabling over UTP?
1 points
Question 17
How many pairs of pins in an RJ-45 connector does a 10BaseT device actually use?
1 points
Question 18
Which of the following is true of an Ethernet hub?
1 points
Question 19
What basis do bridges use to determine whether to forward traffic?
1 points
Question 20
Of all the Gigabit Ethernet standards detailed in the chapter, which maintains a signal over the greatest distance?
1 points
Question 21
What type of fiber-optic cable is used in a 1000BaseLX network?
1 points
Question 22
What is the most common connector used in a 1000BaseSX network?
1 points
Question 23
The "W" in the standard 10GBaseSW stands for which type of signaling?
1 points
Question 24
The "R" in the standard 10GBaseSR stands for which type of signaling?
1 points
Question 25
What is the solution manufacturers devised to accommodate the need for switches to connect to a variety of 10 GbE connector types?
1 points
Question 26
The problem of modal distortion, involving light bouncing back and forth at a sharp angle as it travels down a cable, is unique to which type of fiber-optic cable?
1 points
Question 27
What network component is built into most PCs today?
1 points
Question 28
What type of connector is used by all UTP Ethernet NICs?
1 points
Question 29
With Windows, what can you .
. What are device types A and B in the exhibit below?
2. Which of the following is a NOT a network category based on the geographical dispersion of network components?
Cis 175 Enthusiastic Study / snaptutorial.comGeorgeDixon96
. What are device types A and B in the exhibit below?
2. Which of the following is a NOT a network category based on the geographical dispersion of network components?
CCNA 4 Answers, CCNA 1 Version 4.0 Answers, CCNA 2 Version 4.0 Answers, CCNA 3 Version 4.0 Answers, CCNA 4 Version 4.0 Answers, CCNA 1 Final Version 4.0 Answers, CCNA 2 Final Version 4.0 Answers, CCNA 3 Final Version 4.0 Answers, CCNA 4 Final Version 4.0 Answers
1) What is the difference between CSMACD and CSMACA2) Which .docxdorishigh
1) What is the difference between CSMA/CD and CSMA/CA
2) Which of the following is a form of Ethernet that is transmitted over Fiber Optics
3) You’re setting up a network at an engineering office where very large files are going to move back and forth over the network all day long, day in and day out. Which of the following devices is more likely to avoid a lot of network congestion?
4) A router operates at the ____________ layer of the OSI model.
5) Which of the OSI layers interprets an IP address?
6) How does Exponential backoff work.
7) A collision on an Ethernet network occurs when ______________.
8) In the above illustrated IP address, if this were a Class B address, which of the four octets would be part of the network address?
9) Describe how CSMA/CD works.
10) RIP is a form of _______________ protocol.
11) You have a Class C TCP/IP network. You are using the default subnet mask. What is the maximum number of hosts you can have on your network?
12) Which Networking hardware protocol utilizes CSMA/CD media access methods?
1) FDDI uses a ___________ topology
2) 15.46.86.101 is a ________________ IP address.
3) What is the difference between RTZ and AMI signaling.
4) Which network topology requires that a terminator be installed at both ends of the network?
1) IPX/SPX uses a ____________ -bit network address.
2) The proper default subnet mask for a Class A network is 255.255.0.0.
1) Why is CRC a better error detection method than checksum
2) Which of the following is NOT something DHCP can automaticall configure.
3) The HTTP protocol uses port 80 on a typical Windows machine
4) TCP/IP Version 6 uses a _____________ -bit address.
5) Which of the following OSI layers breaks the user data down into smaller chunks for transmission onto the network?
1) The protocol that is used for outgoing email messages is usually _____________.
...
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
Introduction to AI for Nonprofits with Tapp NetworkTechSoup
Dive into the world of AI! Experts Jon Hill and Tareq Monaur will guide you through AI's role in enhancing nonprofit websites and basic marketing strategies, making it easy to understand and apply.
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
A Survey of Techniques for Maximizing LLM Performance.pptx
Cis 175 Enhance teaching / snaptutorial.com
1. CIS 175 Final Exam (New 100 % Score)
For more classes visit
www.snaptutorial.com
Please check all questions included in this final Below
• Question 1
The image below is an example of what type of WAN connection?
• Question 2
Which of the following is a type of coaxial cable? (Choose 2)
• Question 3
Which of the following is a common Layer 2 protocol that could run
over a dedicated leased line?
• Question 4
SONET uses ________ cabling and offers high data rates, typically in
the ________ Mbps— ________ Gbps range, and long-distance
limitations, typically in the ________ km— ________ km range.
• Question 5
The data rates for T3 link is ________.
• Question 6
A common Layer 2 protocol used on dedicated leased lines is ________.
• Question 7
If the bandwidth of an OC-1 link is 51.84 Mbps, what is the bandwidth
of an OC-3 link?
• Question 8
2. When a wireless channel uses more than one frequency the transmission
method called ________ spectrum.
• Question 9
To protect WLAN traffic from eavesdroppers, a variety of security
standards and practices have been developed, including all of the
following except:
• Question 10
WLAN security based on a PSK technology is called ________ mode.
• Question 11
The wireless device that is marked X in the image below is a ________.
• Question 12
WLANs can be categorized based on their use of wireless APs. The
three main categories are ________,________,and ________.
• Question 13
Which is NOT a security threat for WLAN’s?
• Question 14
Which of the following is one of the broad categories of wireless
antennae that are based on coverage? (Choose 2)
• Question 15
The Wide Area Network (WAN) design below represents what type of
fault-tolerant network design?
• Question 16
Which QoS design consideration is incorrect?
• Question 17
Which term is best described by the following definition: “Both NICs
are active at the same time, and they each have their own MAC
address”?
• Question 18
Which of the following is one of the two modes of Network Interface
Card (NIC) redundancy? (Choose 2)
• Question 19
The ________ command can be used to display information about
current sessions, including source and destination IP addresses and port
numbers.
• Question 20
3. Which command is a UNIX command?
• Question 21
A route can be added by using the route ________ command.
• Question 22
Which command is a UNIX command?
• Question 23
Which UNIX ARP option below is use to display current ARP entries in
a UNIX Hosts’ ARP table?
• Question 24
The ________ command can be used to see what a Layer 2 MAC
address corresponds to a known Layer 3 IP address.
• Question 25
The ________ command pings every router hop from the source to the
destination and reports the round-trip time for each router hop.
• Question 26
The ________ command displays NetBIOS information in IP-based
networks.
• Question 27
Which of the following is NOT a UNIX CLI command?
• Question 28
Imagine that you have been troubleshooting a network cable (either
copper or fiber optic), and you determine that there is a break in the
cable. What would you use to identify exactly where the break exists?
• Question 29
What does the acronym PPDIOO stand for?
• Question 30
Which of the devices shown is a Throughput Tester?
• Question 31
When working with copper cabling (as opposed to fiber optic) a
________ can check a variety of a cable’s electrical characteristics.
• Question 32
What kind of information would you find in an Application Log?
• Question 33
What is the name of the instrument pictured below?
• Question 34
4. What does a Throughput Tester do?
• Question 35
Which of the approaches is used to determine the password of a system
account or a user account? (Choose 2)
• Question 36
Which of the following is NOT an example of an integrity violation?
• Question 37
Which of the following is a firewall device type? (Choose 2)
• Question 38
What type of integrity attack is described in the diagram below?
• Question 39
What are the three primary goals of network security?
• Question 40
What are the three types of malicious traffic detection methods?
• Question 41
What type of availability attack is described in the diagram below?
• Question 42
________ can occur when an analog connection creates an
electromagnetic field around its conductors, inducing its waveforms on a
nearby analog connection.
• Question 43
What is the administrative distance of Routing Information Protocol
(RIP) routing protocol?
• Question 44
Which of the following is a common OSI Layer 3 (network layer)
troubleshooting issue? (Choose 2)
• Question 45
Look at the topology shown below. What is the design issue with this
wireless network?
• Question 46
Consider the network diagram presented below, let’s assume that both
switches are capable of auto negotiating Ethernet speeds of 10, 100, and
1000 Mbps. Let’s also assume the switches do not support MDIX.
Refer to the network diagram. Identify what the Layer 1 issue would be
in this topology.
5. • Question 47
What is the administrative distance of Open Shortest Path First (OSFP)
routing protocol?
• Question 48
What is the administrative distance of internal Enhanced Interior
Gateway Routing Protocol (EIGRP) routing protocol?
• Question 49
Out of these three steps above, the majority of a troubleshooter’s efforts
are spent in which step?
• Question 50
Which of the following is a common OSI Layer 1 (physical layer)
troubleshooting issue?
**************************************************
CIS 175 Midterm Exam
For more classes visit
www.snaptutorial.com
1. What are device types A and B in the exhibit below?
2. Which of the following is a NOT a network category based on
the geographical dispersion of network components?
6. 3. Which of the following applies to client-server network?
(Choose 2)
4. Which of the following matching from the diagram below is
correct?
5. Which of the following applies to the diagram shown below?
(Choose 2)
6. Which of the following matching from the diagram below is
correct?
7. Which of the following statements is TRUE? (Choose 2)
8. The term packet is used fairly generically to refer to protocol
data unit (PDU). However, PDU might have additional names based on
their OSI layer. What is the name of the PDU in the physical layer of the
OSI reference Model?
9. Which of the following matching is true concerning the
Protocol Data Unit (PDU) and its corresponding OSI layer location?
10. Which of the following layers is NOT part of the TCP/IP
protocol stack?
11. Which of the following is NOTalayer of the Open Systems
Interconnect (OSI) reference model?
12. Which of the following is NOT a characteristic of the Media
Access Control (MAC) sublayer of the data-link layer (Layer 2) of the
OSI reference layered model?
13. Which OSI reference model layer is responsible for?
(a) Setting up session
(b) Maintaining a session
(c) Tearing down a session
14. What layers of the OSI correspond to labels A and B?
15. John, the Network Administrator of XYZ Corporation, is
interested in changing the format of text from American Standard Code
for Information Interchange (ASCII) to Extended Binary Code Decimal
Interchange Code (EBCDIC). In addition, his IT manager requested that
all sensitive and confidential information on their servers should be
protected by applying the appropriate encryption. What OSI reference
model layer is responsible for data format such as encryption?
16. What is the purpose of a DNS server?
7. 17. How fast can category 5e transfer data?
18. What is the purpose of a proxy server?
19. What is a virtual server?
20. What is the purpose of RTP in VoIP?
21. Which two types of media are twisted-pair cable?
22. What is the purpose of a virtual desktop?
23. How many broadcast domains are there in the diagram?
24. How fast is standard Ethernet?
25. What is the actual distance of 10Base 2?
26. You can configure user authentication at Layer 2 of the OSI.
What IEEE standard would you use for this?
27. What is the IEEE standard for PoE?
28. How is a switch selected as a root bridge for spanning tree if
the bridge priorities are the same?
29. What is the purpose of the trunk in the diagram?
30. There are four states that a port goes through when
transitioning to the forwarding state. What is the correct order?
31. How many bytes in an IEEE 802.1Q VLAN tag?
32. A more efficient design which involve the logical separate of a
switch ports into different broadcast domains is known as a ________.
33. What is the result of the binary conversion in the example
below?
34. Which IP addresses assignment method leads to less
administrative efforts to Information Technology professionals?
35. What is the result of the binary conversion in the example
below?
36. The diagram below shows an example of what kind of
transmission?
37. How many bits in an IPv4 address?
38. What is the network address for APIPA?
39. How many hosts can you have with a subnet of
192.168.1.0/28?
40. How many bits per octet in an IPv4 address?
41. What are sections A and B of the IP address?
8. 42. For static NAT to work, how many inside global addresses are
needed for inside local addresses?
43. What is the purpose of ARP?
44. Both PC1 and Server 1 have a default gateway, what is the
purpose of a default gateway?
45. Which of the following is a link-state routing protocol that uses
a metric of cost? Choose only one.
46. At the moment PC1 can't reach the Internet. You add a static
default route to R1 that sends all traffic to an unknown destination out
s1/1. Can a user on PC1 access the Internet?
47. Match the Type of NAT on the left with the correct definition
on the right.
48. What is the administrative distance for an internal EIGRP
route?
49. What are the two methods used to prevent loops in a distance
vector routing protocol?
50. Which of the following is an Exterior Gateway Protocol?
Choose only one.
**************************************************
CIS 175 Week 10 Assignment 1 Network
Consultation for DesignIT (2 Papers and 2 PPT)
For more classes visit
www.snaptutorial.com
9. This Tutorial contains 2 Papers and 2 PPT
Assignment 1: Network Consultation for DesignIT
This assignment contains two (2) Sections: Network Consultation
Proposal and Network Consultation Presentation. You must submit both
sections as separate files in order to complete this assignment.
The owners of DesignIT, who recently purchased 56'x36' space for their
expanding business, have asked you to place a bid on a consulting job.
DesignIT is a graphic arts company that, up until now, had contracted
work out to temporary design services. The new space will allow them
to hire two (2) full time designers and a receptionist.
Description of space purchased:
4 Cubicles
1 Office
1 Server room
1 Reception desk
1 Conference room
Below is the design of the space purchased:
Click here if you are having trouble viewing the above image.
Using the building layout, your role is to provide DesignIT with a
network design that interconnects the following considerations:
DesignIT plans to relocate three (3) servers already configured as
follows:
1 Web Server – Microsoft IIS Server
10. 1 File Server – Microsoft Server 2008
1 Server – Server 2008 Small Business Server
DesignIT has requested that the design include the following:
High speed Internet access
Firewall
Antivirus / malware protection
Six (6) computers
Three (3) color laser printers
Wireless access for portable devices
DesignIT has requested the consideration of all interconnected devices
and wiring, along with speeds, for best performance.
Section 1: Network Consultation Proposal
(Microsoft Word)
Create a cost analysis, and develop a proposal for the company.
Write an five to seven (5-7) page proposal in which you:
Recommend one (1) suitable network design.
Suggest one (1) network architecture.
Suggest LAN and Wireless LAN (WLAN) wiring considerations.
Recommend hardware options and costs.
Suggest security considerations for:
Firewall
Antivirus software
Recommend software options and costs.
Outline the labor costs, equipment costs, and service costs for your
suggested design in table format.
Identify the single point of failure, and recommend potential mitigation
strategies.
Use at least three (3) quality resources in this assignment. Note:
Wikipedia and similar Websites do not qualify as quality resources.
Section 1 of your assignment must follow these formatting requirements:
11. Be typed, double spaced, using Times New Roman font (size 12), with
one-inch margins on all sides; citations and references must follow APA
or school-specific format. Check with your professor for any additional
instructions.
Include a cover page containing the title of the assignment, the student’s
name, the professor’s name, the course title, and the date. The cover
page and the reference page are not included in the required assignment
page length.
Section 2: Network Consultation Presentation
(Microsoft PowerPoint or equivalent)
Use Microsoft PowerPoint or an open source alternative to present your
findings to the client.
Create a five to ten (5-10) slide presentation in which you:
Outline the recommendations from your written proposal in Section 1.
Provide general speaking notes that you would use to highlight non-
visual content.
The specific course learning outcomes associated with this assignment
are:
Explain the basic components and media of network systems and
distinguish between LANs, MANs, and WANs.
Summarize current networking standards and how standards bodies and
the standardization process impact networking technology.
Describe the TCP / IP protocols and various functions among the
application layer.
Contrast why different technologies are deployed in different contexts of
networking, such as topology, bandwidth, distance, and number of users.
Explain and differentiate among network hardware devices and
components.
Compare and contrast among network operating systems.
12. Describe security policy, practices, encryption techniques, and design
considerations in support of business operations in a networked
environment.
Explain the role of integrity and availability in a networked
environment.
Use technology and information resources to research issues in
computing networks.
Write clearly and concisely about introductory networking topics using
proper writing mechanics and technical style conventions.
**************************************************