Circular type sinter plant
•Download as DOCX, PDF•
0 likes•694 views
Circular type sintering machines are usually used for blast furnaces under 200m3 due to their high performance to cost ratio, short construction periods, and improved production environment and labor conditions. They can achieve sintering ratios of 70-80%. The sinter plant includes areas for raw materials, crushing, mixing, sintering, and product screening and transfer. Sinter types are classified based on their CaO/SiO2 ratio as non-self fluxing, self-fluxing, or high basicity. Raw materials include iron ore, fluxes like limestone and dolomite, and fuels like coke.
Report
Share
Report
Share
Recommended
What is the use of kaolin after grinding
Kaolin is a type of clay mineral that is processed through grinding to produce fine particles between 80-1000 mesh. This processing improves its brightness, whiteness, and particle size distribution, allowing it to be used in a wide range of applications including ceramics, refractory materials, papermaking, rubber products, petrochemical processes, and materials for the nuclear and aerospace industries. The document provides examples of specific uses of kaolin and advertises grinding mill equipment from a manufacturer for processing kaolin.
How to polish and maintain injection molds?
The polishing described in plastic mold processing is very different from the surface polishing required in other industries. Strictly speaking, the polishing of the mold should be called mirror processing. Not only does it have high requirements for polishing itself, but it also has a high standard for surface flatness, smoothness, and geometric accuracy. Surface polishing generally requires only a shiny surface.
Krb engineering metalworking coolants for machining
Metalworking coolants serve several important functions including cooling tools and workpieces, lubricating interfaces, protecting against corrosion and biological growth, and facilitating chip removal. An ideal coolant provides these functions at low cost while maintaining a long sump life, ease of use, and compatibility with multiple materials and operations. Heat generated during machining is primarily transferred to the chip, workpiece, and tool, with the majority going to the chip. Coolants function by providing hydrodynamic, boundary, or extreme pressure lubrication between interfaces. Soluble oils generally have good corrosion protection and lubricity at low cost, while semi-synthetics and synthetics offer improved cleanliness, sump life, and biological and coolant system control.
Manufacturing Processes 29
The document discusses the powder metallurgy process which involves four main steps: 1) powder preparation by grinding or chemical reaction to produce metal powders, 2) mixing and blending powders with additives, 3) compacting the blended powder in a die under high pressure to form a green compact, and 4) sintering the compact at high temperature to strengthen bonds between particles into a final product. Secondary operations like infiltration may further increase density. Powder metallurgy allows mass production of parts with complex shapes and close tolerances at lower cost than conventional methods.
Product manufacturing
The document discusses various product design techniques for manufacturing, including cutting by abrasion where an abrasive material is used to shape a workpiece through rubbing, and the mechanics of abrasion which involve grains of abrasive material contacting and removing fragments of the workpiece. It also describes factors that affect abrasion such as hardness, grain size, force, and lubricants. Specific techniques covered include grinding, polishing, buffing, flame cutting which uses an oxygen jet to cut materials, and laser cutting which uses a concentrated beam of light to precisely cut thin materials. Water jet cutting is also summarized, which uses a high pressure water jet optionally with abrasive particles to cut materials without thermal effects.
Abrasive jet machining
The document discusses abrasive jet machining (AJM), which is a machining process where material is removed by a high-velocity stream of abrasive particles carried in a gas. It describes the process, components, parameters, capabilities, applications, advantages, and disadvantages of AJM. Key aspects covered include that AJM uses abrasive particles accelerated in a gas stream to cause micro-fracturing and erosion of the workpiece surface, and that it can machine hard and brittle materials with a cool cutting action and high surface finish.
Design and-construction-of-soil-moisture-measurement-system
This document describes the design and construction of a soil moisture measurement system using an Arduino soil moisture sensor. The system aims to study different soil moisture measurement methods and design a device to measure soil moisture. It consists of an Arduino, soil moisture sensor, LCD display, and other components. The document outlines the objectives, literature review on past measurement methods, methodology including components and workflow, results of soil moisture readings from different soil types, and applications and advantages/disadvantages of the system. It concludes the system provides reliable and accurate measurements and recommends future improvements to the system.
Sensors for water level, soil moisture temp & r.humidity
Arduino and sensors for water level, soil moisture, temperature & relative humidity for application in the ClimaAdapt Project areas - Nagarjuna Sagar Project Left and Right Canals in the States of Telangana and Andhra Pradesh for water use efficiency - Canal and On Farm
Recommended
What is the use of kaolin after grinding
Kaolin is a type of clay mineral that is processed through grinding to produce fine particles between 80-1000 mesh. This processing improves its brightness, whiteness, and particle size distribution, allowing it to be used in a wide range of applications including ceramics, refractory materials, papermaking, rubber products, petrochemical processes, and materials for the nuclear and aerospace industries. The document provides examples of specific uses of kaolin and advertises grinding mill equipment from a manufacturer for processing kaolin.
How to polish and maintain injection molds?
The polishing described in plastic mold processing is very different from the surface polishing required in other industries. Strictly speaking, the polishing of the mold should be called mirror processing. Not only does it have high requirements for polishing itself, but it also has a high standard for surface flatness, smoothness, and geometric accuracy. Surface polishing generally requires only a shiny surface.
Krb engineering metalworking coolants for machining
Metalworking coolants serve several important functions including cooling tools and workpieces, lubricating interfaces, protecting against corrosion and biological growth, and facilitating chip removal. An ideal coolant provides these functions at low cost while maintaining a long sump life, ease of use, and compatibility with multiple materials and operations. Heat generated during machining is primarily transferred to the chip, workpiece, and tool, with the majority going to the chip. Coolants function by providing hydrodynamic, boundary, or extreme pressure lubrication between interfaces. Soluble oils generally have good corrosion protection and lubricity at low cost, while semi-synthetics and synthetics offer improved cleanliness, sump life, and biological and coolant system control.
Manufacturing Processes 29
The document discusses the powder metallurgy process which involves four main steps: 1) powder preparation by grinding or chemical reaction to produce metal powders, 2) mixing and blending powders with additives, 3) compacting the blended powder in a die under high pressure to form a green compact, and 4) sintering the compact at high temperature to strengthen bonds between particles into a final product. Secondary operations like infiltration may further increase density. Powder metallurgy allows mass production of parts with complex shapes and close tolerances at lower cost than conventional methods.
Product manufacturing
The document discusses various product design techniques for manufacturing, including cutting by abrasion where an abrasive material is used to shape a workpiece through rubbing, and the mechanics of abrasion which involve grains of abrasive material contacting and removing fragments of the workpiece. It also describes factors that affect abrasion such as hardness, grain size, force, and lubricants. Specific techniques covered include grinding, polishing, buffing, flame cutting which uses an oxygen jet to cut materials, and laser cutting which uses a concentrated beam of light to precisely cut thin materials. Water jet cutting is also summarized, which uses a high pressure water jet optionally with abrasive particles to cut materials without thermal effects.
Abrasive jet machining
The document discusses abrasive jet machining (AJM), which is a machining process where material is removed by a high-velocity stream of abrasive particles carried in a gas. It describes the process, components, parameters, capabilities, applications, advantages, and disadvantages of AJM. Key aspects covered include that AJM uses abrasive particles accelerated in a gas stream to cause micro-fracturing and erosion of the workpiece surface, and that it can machine hard and brittle materials with a cool cutting action and high surface finish.
Design and-construction-of-soil-moisture-measurement-system
This document describes the design and construction of a soil moisture measurement system using an Arduino soil moisture sensor. The system aims to study different soil moisture measurement methods and design a device to measure soil moisture. It consists of an Arduino, soil moisture sensor, LCD display, and other components. The document outlines the objectives, literature review on past measurement methods, methodology including components and workflow, results of soil moisture readings from different soil types, and applications and advantages/disadvantages of the system. It concludes the system provides reliable and accurate measurements and recommends future improvements to the system.
Sensors for water level, soil moisture temp & r.humidity
Arduino and sensors for water level, soil moisture, temperature & relative humidity for application in the ClimaAdapt Project areas - Nagarjuna Sagar Project Left and Right Canals in the States of Telangana and Andhra Pradesh for water use efficiency - Canal and On Farm
Chemical, mineralogical and metallurgical characterization of goethite rich i...
In this paper the influence of structural water present in goethite rich ore fines on sinter properties like mean size, RI,
RDI, TI, AI and microstructure were studied. For this three plant sinters with different basicities (A1, A2 and A3) were
experimentally produced varying the raw mix. From the study on variable basicity, it is found that increased basicity has good
effects on the sinter properties. The desired norms of metallurgical properties for good quality sinter required for large size blast
furnace met with increased tumbler index and decreased abrasion index. The RI is also better in highly fluxed sinter A3 and the
RDI is low. All these are happening due to availability of more free lime and porosity. The mean-size of sinter also increases
with increase of basicity. The reducibility index and RDI of sinter A2 and A3 appear to be similar although there is a variation
in chemistry and basicity, this may be attributed to use of more micro-fines in raw material of sinter A3. The specific consumption
of coke rate is highest for sinter A3 is also due to more micro-fines in raw materials. From the microstructure it is found that in
sinter A1 more magnetite and less ferrites are developed in comparison to A2 and A3. The silicoferrites of calcium and
aluminium (SFCA) developed in sinter A2 and A3 are acicular in structure which provides better strength to the sinter. Also the
porosity is more in case of A2 and A3 which can accelerate the reducibility process.
What is the use of briquette
Briquette is a coal product with a certain shape or particle size by mechanically pressing fine coal or pulverized coal. It is mainly divided into industrial briquette and civil briquette.
IIT-Kanpur Project
The document reports on a project to develop micropellets from beneficiated low-grade iron ore fines for use as feed material in sinter plants. The project studies process parameters for pelletizing iron ore fines into spherical pellets 4-6mm in size using various binders. The parameters optimized are binder type and amount, moisture content, pelletizer disk speed and angle, and pelletization time. The quality of the micropellets is evaluated based on yield of acceptable sized pellets, and their cold strength and durability. Developing micropellets with sufficient cold strength to facilitate transport and charging into sinter plants without further firing is a focus of the project.
20150410 fenmeihui
Fly ash is a fine powder recovered from coal combustion flue gases. It is composed mainly of oxides like SiO2, Al2O3, FeO, and Fe2O3. Large amounts of fly ash are produced annually by coal-fired power plants. Unaddressed fly ash can pollute the atmosphere and water systems. Fly ash can also be used as an additive in concrete where its small particles enhance strength and homogeneity. Mineral processing involves pre-selecting ore, separating valuable minerals from waste via primary selection to produce concentrates and tailings, and combining processes to comprehensively recover useful components from coarse and fine particles.
Sponge Iron Plant.pdf
Zhengzhou Hengyang Industry Co., Ltd provides services related to rotary kiln systems for sponge iron production. They specialize in designing, manufacturing, installing, and providing operational support for rotary kilns and related equipment. The company offers training programs and innovative solutions to help plants reach their full potential. The document describes the raw material requirements, manufacturing process, and basic components involved in a typical coal-based rotary kiln system for producing sponge iron.
Powder Metallurgy
Powder metallurgy (PM) is a term covering a wide range of ways in which materials or components are made from metal powders. PM processes can avoid, or greatly reduce, the need to use metal removal processes, thereby drastically reducing yield losses in manufacture and often resulting in lower costs.
Conventional Powder-Metallurgy Process
The powder-metallurgy (PM) process, depicted in the diagram below, involves mixing elemental or alloy powders, compacting the mixture in a die and then sintering, or heating, the resultant shapes in an atmosphere-controlled furnace to metallurgically bond the particles.
Sintering process of Iron Ore General.docx
The document summarizes the sintering process used in iron making. Sintering involves heating a mixture of iron ore fines, return fines, and fluxes to partially melt the materials and form porous agglomerates called sinter. This sinter product is the main burden material charged to blast furnaces. The key steps are granulation of the raw materials, formation of a sinter bed on a moving grate, combustion through the bed which agglomerates the materials, and screening of the final sinter product into sizes suitable for the blast furnace burden. Proper control of variables like feed moisture and burn-through point are important for stabilizing the process.
Hismelt (ironmaking) process
The document discusses the Hismelt process as an alternative to the blast furnace process for ironmaking. Some key points:
- Hismelt can utilize poorer quality raw materials like non-coking coal and non-agglomerated iron ore fines compared to blast furnaces.
- The process involves injecting iron ore, coal, and fluxes directly into a molten bath where the carbon in the coal reacts with oxygen to reduce the iron ore.
- This allows for higher absorption efficiency and enables use of ultra-fine materials. It also creates conditions for phosphorus to partition strongly to the slag.
- The process has lower specific energy consumption and oxygen demand than blast furnaces or CO
Design And Fabrication Of Iron Ore Sintering Machine
This document is a project report submitted by Albin Kuriachan Cherian and Siddharth Rathod for their Bachelor of Engineering degree. The project involves designing and fabricating an iron ore sintering machine in the metallurgical engineering department laboratory for experimental studies. The report provides background on the sintering process and reviews literature on sintering machine types, process parameters, quality control, and the economics and trends of sintering practice. It then details the design of the iron ore sintering machine to be fabricated, including dimensions, materials, and the fabrication process. The report concludes with the scope for future work and an overall conclusion.
Aluminium production-process
The document discusses the production of aluminum through the Hall-Heroult process. It involves dissolving alumina in a cryolite electrolyte and passing an electric current to reduce the alumina to aluminum. Key raw materials include alumina, carbon anodes, cryolite, aluminum fluoride and large amounts of electrical power. Prebaked carbon anodes are made from coke, pitch and butts and are essential to the electrolysis process. The continuous smelting process requires maintaining the potline 24/7 to avoid costly shutdowns.
Pellet and its use in blast furnace
This document discusses pellets, which are spherical balls made from iron ore fines that are used as a feed material in blast furnaces. Some key points include:
- Pellets have good physical properties that make them suitable for mechanical transportation over long distances. They also have excellent metallurgical properties similar to or better than lump iron ore.
- Using pellets in ironmaking can reduce CO2 emissions by up to 44 million tonnes per year compared to using sinters. This is due to reductions in mining, transportation, agglomeration and steelmaking emissions.
- Increasing the proportion of pellets in a blast furnace burden can improve gas utilization by 4% and reduce co
Classification of Tool Materials
Classification of Tool Materials.
For More Details
Subscribe to My YOUTUBE CHANNEL
Engineering Study Materials : https://www.youtube.com/channel/UC8vigo0VxccfcGnmJnf-ESA
071113 hm arm impacts
The document discusses the advantages of using alternative raw materials (ARMs) in cement production. It notes that the cement process allows for complete combustion of organic materials and results in zero ultimate waste. Using ARMs in cement kilns can help reduce emissions and fossil fuel usage while providing a waste disposal solution. However, certain elements like chlorine from some ARMs can disrupt the kiln operation and lead to quality irregularities if not carefully controlled. Overall, ARMs only slightly modify cement behavior as long as elements remain in low, stable concentrations and are trapped in insoluble phases of the clinker.
Minerals used in Refractories and ceramic
The document discusses various mineral raw materials used in the ceramic industry in India. The principal materials are silica in the form of quartz and other minerals, and alumino-silicates like feldspars and clays. Major sources of silica are quartzite, sandstone and high silica sands. Important feldspar sources are pegmatites in Rajasthan, Bihar and Andhra Pradesh. Ball clays are found in Rajasthan and Gujarat while china clay deposits exist across India. Refractory materials include fireclay, quartz, dolomite, magnesite, serpentine, olivine and chromite. The document also provides details on the
SOLID WASTE MANAGEMENT IN PRIMARY STEELMAKING.pptx
The document discusses solid waste management in primary steelmaking. It outlines the types and sources of solid waste generated from various processes, including blast furnace slag, steel slag, dust, and mill scale. It also describes methods for recycling and reusing waste materials, such as utilizing blast furnace slag in cement production, road construction, and soil conditioning. The high levels of solid waste generated are a challenge, but proper waste management through recycling and reuse is important for sustainable growth of the steel industry.
Sintering Technology
The document discusses sinter making technology used in iron ore mining. It describes how iron ore fines generated during mining cannot be directly charged in blast furnaces due to size restrictions. Sintering is used to agglomerate the fines into a porous mass that meets size requirements. The key steps in sinter making include: 1) raw material preparation through crushing, mixing and granulation to produce a homogeneous mixture, 2) ignition of the mixture on a traveling grate where combustion of fuel preheats and agglomerates the fines into sinter.
Final print report
Powder metallurgy is a process of making components from metallic powders. The key steps are manufacturing metal powders, blending powders, compacting, sintering, and finishing. The characteristics of metal powders that influence the process are particle shape, size, distribution, flow rate, compressibility, apparent density, and purity. Common powder manufacturing methods include atomization, machining, crushing/milling, reduction, electrolytic deposition, shotting, and condensation. Particle characteristics determine how powders behave during compaction and sintering.
Chapter 8 powder metallurgy
Powder metallurgy is a process for manufacturing parts from metal powders by compacting and sintering. Key steps include producing metal powders through methods like atomization or chemical reduction, blending powders and lubricants, compacting the blended powder in a die under pressure to form a green compact, and sintering the compact at high temperatures to bond the powder particles. The sintered parts have properties that cannot be achieved through conventional manufacturing and the process allows for high precision and low waste production of simple parts.
slageu.pptx
The method and machine to treat slag of metal industries, the method based on improve the mechanical properties of the slag as well as prevent its interaction with water, improvement is done by bonding slag with binders in slag treatment machine. consists of mill for crushing and grinding of slag, mixer to achieve homogeneity, bunker to assemble the bonding materials that do not need grinding, tank to collect and heat mixture to become viscous and easy deformed in pipes and a bowl to collect the treated slag.
powder metallurgy and micromachining notes
This document discusses powder metallurgy, which involves pressing metal powders into a shape at room temperature and then sintering the powders to fuse them together without melting. The most common metals used are iron, copper, aluminum, and others. Parts produced through powder metallurgy have good mechanical properties and dimensional tolerances at a lower cost than casting or machining. The document then describes various powder production methods like atomization, electrolysis, carbonyl decomposition, and comminution. It also discusses properties of metal powders like size, shape, purity and their effect on properties of sintered parts. The basic powder metallurgy process steps of blending, compacting, sintering and finishing
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
More Related Content
Similar to Circular type sinter plant
Chemical, mineralogical and metallurgical characterization of goethite rich i...
In this paper the influence of structural water present in goethite rich ore fines on sinter properties like mean size, RI,
RDI, TI, AI and microstructure were studied. For this three plant sinters with different basicities (A1, A2 and A3) were
experimentally produced varying the raw mix. From the study on variable basicity, it is found that increased basicity has good
effects on the sinter properties. The desired norms of metallurgical properties for good quality sinter required for large size blast
furnace met with increased tumbler index and decreased abrasion index. The RI is also better in highly fluxed sinter A3 and the
RDI is low. All these are happening due to availability of more free lime and porosity. The mean-size of sinter also increases
with increase of basicity. The reducibility index and RDI of sinter A2 and A3 appear to be similar although there is a variation
in chemistry and basicity, this may be attributed to use of more micro-fines in raw material of sinter A3. The specific consumption
of coke rate is highest for sinter A3 is also due to more micro-fines in raw materials. From the microstructure it is found that in
sinter A1 more magnetite and less ferrites are developed in comparison to A2 and A3. The silicoferrites of calcium and
aluminium (SFCA) developed in sinter A2 and A3 are acicular in structure which provides better strength to the sinter. Also the
porosity is more in case of A2 and A3 which can accelerate the reducibility process.
What is the use of briquette
Briquette is a coal product with a certain shape or particle size by mechanically pressing fine coal or pulverized coal. It is mainly divided into industrial briquette and civil briquette.
IIT-Kanpur Project
The document reports on a project to develop micropellets from beneficiated low-grade iron ore fines for use as feed material in sinter plants. The project studies process parameters for pelletizing iron ore fines into spherical pellets 4-6mm in size using various binders. The parameters optimized are binder type and amount, moisture content, pelletizer disk speed and angle, and pelletization time. The quality of the micropellets is evaluated based on yield of acceptable sized pellets, and their cold strength and durability. Developing micropellets with sufficient cold strength to facilitate transport and charging into sinter plants without further firing is a focus of the project.
20150410 fenmeihui
Fly ash is a fine powder recovered from coal combustion flue gases. It is composed mainly of oxides like SiO2, Al2O3, FeO, and Fe2O3. Large amounts of fly ash are produced annually by coal-fired power plants. Unaddressed fly ash can pollute the atmosphere and water systems. Fly ash can also be used as an additive in concrete where its small particles enhance strength and homogeneity. Mineral processing involves pre-selecting ore, separating valuable minerals from waste via primary selection to produce concentrates and tailings, and combining processes to comprehensively recover useful components from coarse and fine particles.
Sponge Iron Plant.pdf
Zhengzhou Hengyang Industry Co., Ltd provides services related to rotary kiln systems for sponge iron production. They specialize in designing, manufacturing, installing, and providing operational support for rotary kilns and related equipment. The company offers training programs and innovative solutions to help plants reach their full potential. The document describes the raw material requirements, manufacturing process, and basic components involved in a typical coal-based rotary kiln system for producing sponge iron.
Powder Metallurgy
Powder metallurgy (PM) is a term covering a wide range of ways in which materials or components are made from metal powders. PM processes can avoid, or greatly reduce, the need to use metal removal processes, thereby drastically reducing yield losses in manufacture and often resulting in lower costs.
Conventional Powder-Metallurgy Process
The powder-metallurgy (PM) process, depicted in the diagram below, involves mixing elemental or alloy powders, compacting the mixture in a die and then sintering, or heating, the resultant shapes in an atmosphere-controlled furnace to metallurgically bond the particles.
Sintering process of Iron Ore General.docx
The document summarizes the sintering process used in iron making. Sintering involves heating a mixture of iron ore fines, return fines, and fluxes to partially melt the materials and form porous agglomerates called sinter. This sinter product is the main burden material charged to blast furnaces. The key steps are granulation of the raw materials, formation of a sinter bed on a moving grate, combustion through the bed which agglomerates the materials, and screening of the final sinter product into sizes suitable for the blast furnace burden. Proper control of variables like feed moisture and burn-through point are important for stabilizing the process.
Hismelt (ironmaking) process
The document discusses the Hismelt process as an alternative to the blast furnace process for ironmaking. Some key points:
- Hismelt can utilize poorer quality raw materials like non-coking coal and non-agglomerated iron ore fines compared to blast furnaces.
- The process involves injecting iron ore, coal, and fluxes directly into a molten bath where the carbon in the coal reacts with oxygen to reduce the iron ore.
- This allows for higher absorption efficiency and enables use of ultra-fine materials. It also creates conditions for phosphorus to partition strongly to the slag.
- The process has lower specific energy consumption and oxygen demand than blast furnaces or CO
Design And Fabrication Of Iron Ore Sintering Machine
This document is a project report submitted by Albin Kuriachan Cherian and Siddharth Rathod for their Bachelor of Engineering degree. The project involves designing and fabricating an iron ore sintering machine in the metallurgical engineering department laboratory for experimental studies. The report provides background on the sintering process and reviews literature on sintering machine types, process parameters, quality control, and the economics and trends of sintering practice. It then details the design of the iron ore sintering machine to be fabricated, including dimensions, materials, and the fabrication process. The report concludes with the scope for future work and an overall conclusion.
Aluminium production-process
The document discusses the production of aluminum through the Hall-Heroult process. It involves dissolving alumina in a cryolite electrolyte and passing an electric current to reduce the alumina to aluminum. Key raw materials include alumina, carbon anodes, cryolite, aluminum fluoride and large amounts of electrical power. Prebaked carbon anodes are made from coke, pitch and butts and are essential to the electrolysis process. The continuous smelting process requires maintaining the potline 24/7 to avoid costly shutdowns.
Pellet and its use in blast furnace
This document discusses pellets, which are spherical balls made from iron ore fines that are used as a feed material in blast furnaces. Some key points include:
- Pellets have good physical properties that make them suitable for mechanical transportation over long distances. They also have excellent metallurgical properties similar to or better than lump iron ore.
- Using pellets in ironmaking can reduce CO2 emissions by up to 44 million tonnes per year compared to using sinters. This is due to reductions in mining, transportation, agglomeration and steelmaking emissions.
- Increasing the proportion of pellets in a blast furnace burden can improve gas utilization by 4% and reduce co
Classification of Tool Materials
Classification of Tool Materials.
For More Details
Subscribe to My YOUTUBE CHANNEL
Engineering Study Materials : https://www.youtube.com/channel/UC8vigo0VxccfcGnmJnf-ESA
071113 hm arm impacts
The document discusses the advantages of using alternative raw materials (ARMs) in cement production. It notes that the cement process allows for complete combustion of organic materials and results in zero ultimate waste. Using ARMs in cement kilns can help reduce emissions and fossil fuel usage while providing a waste disposal solution. However, certain elements like chlorine from some ARMs can disrupt the kiln operation and lead to quality irregularities if not carefully controlled. Overall, ARMs only slightly modify cement behavior as long as elements remain in low, stable concentrations and are trapped in insoluble phases of the clinker.
Minerals used in Refractories and ceramic
The document discusses various mineral raw materials used in the ceramic industry in India. The principal materials are silica in the form of quartz and other minerals, and alumino-silicates like feldspars and clays. Major sources of silica are quartzite, sandstone and high silica sands. Important feldspar sources are pegmatites in Rajasthan, Bihar and Andhra Pradesh. Ball clays are found in Rajasthan and Gujarat while china clay deposits exist across India. Refractory materials include fireclay, quartz, dolomite, magnesite, serpentine, olivine and chromite. The document also provides details on the
SOLID WASTE MANAGEMENT IN PRIMARY STEELMAKING.pptx
The document discusses solid waste management in primary steelmaking. It outlines the types and sources of solid waste generated from various processes, including blast furnace slag, steel slag, dust, and mill scale. It also describes methods for recycling and reusing waste materials, such as utilizing blast furnace slag in cement production, road construction, and soil conditioning. The high levels of solid waste generated are a challenge, but proper waste management through recycling and reuse is important for sustainable growth of the steel industry.
Sintering Technology
The document discusses sinter making technology used in iron ore mining. It describes how iron ore fines generated during mining cannot be directly charged in blast furnaces due to size restrictions. Sintering is used to agglomerate the fines into a porous mass that meets size requirements. The key steps in sinter making include: 1) raw material preparation through crushing, mixing and granulation to produce a homogeneous mixture, 2) ignition of the mixture on a traveling grate where combustion of fuel preheats and agglomerates the fines into sinter.
Final print report
Powder metallurgy is a process of making components from metallic powders. The key steps are manufacturing metal powders, blending powders, compacting, sintering, and finishing. The characteristics of metal powders that influence the process are particle shape, size, distribution, flow rate, compressibility, apparent density, and purity. Common powder manufacturing methods include atomization, machining, crushing/milling, reduction, electrolytic deposition, shotting, and condensation. Particle characteristics determine how powders behave during compaction and sintering.
Chapter 8 powder metallurgy
Powder metallurgy is a process for manufacturing parts from metal powders by compacting and sintering. Key steps include producing metal powders through methods like atomization or chemical reduction, blending powders and lubricants, compacting the blended powder in a die under pressure to form a green compact, and sintering the compact at high temperatures to bond the powder particles. The sintered parts have properties that cannot be achieved through conventional manufacturing and the process allows for high precision and low waste production of simple parts.
slageu.pptx
The method and machine to treat slag of metal industries, the method based on improve the mechanical properties of the slag as well as prevent its interaction with water, improvement is done by bonding slag with binders in slag treatment machine. consists of mill for crushing and grinding of slag, mixer to achieve homogeneity, bunker to assemble the bonding materials that do not need grinding, tank to collect and heat mixture to become viscous and easy deformed in pipes and a bowl to collect the treated slag.
powder metallurgy and micromachining notes
This document discusses powder metallurgy, which involves pressing metal powders into a shape at room temperature and then sintering the powders to fuse them together without melting. The most common metals used are iron, copper, aluminum, and others. Parts produced through powder metallurgy have good mechanical properties and dimensional tolerances at a lower cost than casting or machining. The document then describes various powder production methods like atomization, electrolysis, carbonyl decomposition, and comminution. It also discusses properties of metal powders like size, shape, purity and their effect on properties of sintered parts. The basic powder metallurgy process steps of blending, compacting, sintering and finishing
Similar to Circular type sinter plant (20)
Chemical, mineralogical and metallurgical characterization of goethite rich i...
Chemical, mineralogical and metallurgical characterization of goethite rich i...
Design And Fabrication Of Iron Ore Sintering Machine
Design And Fabrication Of Iron Ore Sintering Machine
SOLID WASTE MANAGEMENT IN PRIMARY STEELMAKING.pptx
SOLID WASTE MANAGEMENT IN PRIMARY STEELMAKING.pptx
Recently uploaded
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Design and Analysis of Algorithms-DP,Backtracking,Graphs,B&B
Dynamic Programming
Backtracking
Techniques for Graphs
Branch and Bound
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
一比一原版(IIT毕业证)伊利诺伊理工大学毕业证成绩单专业办理
IIT毕业证原版定制【微信：176555708】【伊利诺伊理工大学毕业证成绩单-学位证】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：176555708】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：176555708】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
学历顾问：微信：176555708
在线办理(ANU毕业证书)澳洲国立大学毕业证录取通知书一模一样
学校原件一模一样【微信：741003700 】《(ANU毕业证书)澳洲国立大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Modelagem de um CSTR com reação endotermica.pdf
Modelagem em função de transferencia. CSTR não-linear.
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Bigdata of technology
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
Building Electrical System Design & Installation
Guide for Building Electrical System Design & Installation
一比一原版(UC Berkeley毕业证)加利福尼亚大学|伯克利分校毕业证成绩单专业办理
UC Berkeley毕业证原版定制【微信：176555708】【加利福尼亚大学|伯克利分校毕业证成绩单-学位证】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：176555708】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：176555708】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
学历顾问：微信：176555708
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Low power architecture of logic gates using adiabatic techniques
The growing significance of portable systems to limit power consumption in ultra-large-scale-integration chips of very high density, has recently led to rapid and inventive progresses in low-power design. The most effective technique is adiabatic logic circuit design in energy-efficient hardware. This paper presents two adiabatic approaches for the design of low power circuits, modified positive feedback adiabatic logic (modified PFAL) and the other is direct current diode based positive feedback adiabatic logic (DC-DB PFAL). Logic gates are the preliminary components in any digital circuit design. By improving the performance of basic gates, one can improvise the whole system performance. In this paper proposed circuit design of the low power architecture of OR/NOR, AND/NAND, and XOR/XNOR gates are presented using the said approaches and their results are analyzed for powerdissipation, delay, power-delay-product and rise time and compared with the other adiabatic techniques along with the conventional complementary metal oxide semiconductor (CMOS) designs reported in the literature. It has been found that the designs with DC-DB PFAL technique outperform with the percentage improvement of 65% for NOR gate and 7% for NAND gate and 34% for XNOR gate over the modified PFAL techniques at 10 MHz respectively.
bank management system in java and mysql report1.pdf
truth is high but higher still is truth full living
Recently uploaded (20)
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024)
Design and Analysis of Algorithms-DP,Backtracking,Graphs,B&B
Design and Analysis of Algorithms-DP,Backtracking,Graphs,B&B
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
Low power architecture of logic gates using adiabatic techniques
Low power architecture of logic gates using adiabatic techniques
bank management system in java and mysql report1.pdf
bank management system in java and mysql report1.pdf
Circular type sinter plant
- 1. Circular type sintering machine is usually used for the blast furnace volume under 200m³ ， the advantages are high performance cost ratio, short construction period, convenient for dust removal and crushing treatment, compared with box type sintering type, the air leakage ratio is improved at some degree, the production environment and the labor intensity of workers also get well improved, the sintering ratio usually can achieve 70~80%. The sinter plant is composed of raw materials stock yard, crushing chamber (flux), batching room, primary and secondary drum type material mixer, downdraught sinter disk, end products crushing and screening and transfer station. Types of sinter: The value of CaO/SiO2 ＜ 1, it is non self-fluxing sinter, it is self-fluxing sinter if the basicity is 1~1.5,it is high basicity sinter if the basicity is 1.5~2.5. Sinter raw materials: 1. Ferrous raw materials mainly include magnetite, hematite, limonite, siderite, iron ore powder is the main raw materials for sinter production, its physicochemical property affect the quality of sinter a lot. The requirement for iron ore powder include high grade, stable composition, less impurities, the content of gangue is suitable for slagging, appropriate grain size, if the moisture content of concentrate is above 12%, the batching accuracy and the mixing uniformity will be affected. 2. The sinter flux can be divided into alkaline flux, neutral flux (Al2O3) and acidic flux (quartz). The commonly used alkaline flux have limestone(CaCO3),slaked lime(Ca(OH)2), unslaked lime (CaO),dolomite(CaMg(CO3)2). The requirement for flux include high efficient content, less acidic oxide, sulfur, phosphorus, etc. appropriate particle size and moisture. 3. The sinter fuel is composed of ignition fuel and sinter fuel, sinter fuel is the combusting solid fuel between material beds, the common types include broken coke and anthracite, some component like phosphorus, sulphur, ferrous sulfate in sinter raw materials can release heat during sinter process and become auxiliary heat source, the requirement for solid fuel is high fixed carbon, low volatiles, ash and sulphur content.