This document contains a proposal from Dana Noavaran Energy & Industry Co. for an 18MW combined heat and power (CHP) generation plant for Khoramshahr Power Plant. It includes specifications and pricing for 9 generator sets, heat recovery systems, cooling systems, lubricating oil systems, fuel gas systems, and other mechanical, electrical, and civil engineering components. It also provides construction, installation, testing, commissioning, and training costs. The total proposed cost is over 10 million Euros.
13 ta data sheet - flypartsguy.com - 10.2018FrankEasel
- The document provides specifications for a Weichai America Corp WP13GTA engine, including its type, dimensions, performance ratings, thermal balance, weight and other technical details.
- It is an inline 6-cylinder 4-stroke engine with a displacement of 12.54 liters. Maximum power output is 313.9 kW at the flywheel on natural gas and 202.4 kW on liquid propane gas.
- Additional details provided include air and fuel system specifications, cooling and lubrication systems, electrical system specifications, and performance curves.
This document discusses heat pump technology and Mayekawa heat pump products. It provides technical specifications and performance data for Mayekawa reciprocating and screw compressor heat pumps, including the N6HK and N160GHS models. It also presents three case studies where Mayekawa heat pumps were installed to produce hot water for district heating, industrial processes, and overcompression applications. The document concludes with information on Mayekawa's global presence and availability of its heat pump products worldwide.
This document describes Guangdong Honny Power-Tech Co., Ltd and Googol Engine-Tech Co., which are power solution and large power engine manufacturers. It provides information on their product lines, which include gas generators from 160kW to 1452kW and large diesel/gas engines. It also details the companies' locations, vision, and standard equipment and components included with their genset and power solutions.
2014 Googol gas generator introduction-googol(1)Mike Renko
Googol Engine-Tech Co. produces gas and diesel engines for power generation. They have manufacturing bases in China and the US. Their product lines include the R series gas generators from 160kW to 500kW and the J series from 600kW to 1452kW. The document provides technical specifications and components for their gas generator sets including engines, alternators, control systems, and other electrical and mechanical components.
10 ta data sheet - flypartsguy.com - 8.2018FrankEasel
This document provides specifications for a Weichai America Corp WP10GTA engine. It includes basic data on displacement, cylinder configuration, aspiration, power ratings, thermal balance, weight and dimensions, cooling system details, lubrication system specs, and fuel consumption curves. The engine is an inline 4-cycle diesel with a bore and stroke of 126mm x 130mm, producing 284.6 kW at 212.2 HP on natural gas and 216.8 kW at 161.7 HP on liquid propane gas under ISO 3046 test conditions.
Satellite chiller package miu dec 2013 - enEUROPAGES
This document describes a satellite chiller package that provides cooling without requiring a machine room. It has a mobile unit design for easy installation, high efficiency, and reliability due to factory manufacturing. The package includes monitoring and automatic control systems. Diagrams show the flow and components of single and dual-unit systems using ammonia refrigerant. Performance specifications are given for summer and winter operation, showing higher efficiency and COP when using automatic Vi control that optimizes condensing temperature. Remote monitoring capabilities include energy use tracking, alarms, trend recording, and optimal control for energy savings.
Presented at Data Centre World, 27/2/13, 11.30am, Facilities Theatre. With many alternative cooling solutions available it can be confusing as to which most improve efficiency and reduce operating costs of a data centre.
Using CFD modelling and actual site data to illustrate best practice, Airedale International Air Conditioning demonstrates the benefits and constraints of available containment options and proposes optimised free-cooling solutions for each application type.
The session was presented by George Hannah, Product Development Director, Airedale International Air Conditioning. George plays a key role in strengthening Airedale’s position at the forefront of precision air conditioning and chiller development, by leading an expanding programme of new product development and the application of new generation technology. His remit is to steer the company's expansion into developing rack level cooling systems and innovative cooling solutions that increase data centre efficiency, raise free-cooling potential and harness and reclaim energy. George heads a product development team of twenty three, including sponsored PhD students and graduate apprentices. He is a chartered mechanical engineer with a B Eng (Hons) from Heriot Watt University.
13 ta data sheet - flypartsguy.com - 10.2018FrankEasel
- The document provides specifications for a Weichai America Corp WP13GTA engine, including its type, dimensions, performance ratings, thermal balance, weight and other technical details.
- It is an inline 6-cylinder 4-stroke engine with a displacement of 12.54 liters. Maximum power output is 313.9 kW at the flywheel on natural gas and 202.4 kW on liquid propane gas.
- Additional details provided include air and fuel system specifications, cooling and lubrication systems, electrical system specifications, and performance curves.
This document discusses heat pump technology and Mayekawa heat pump products. It provides technical specifications and performance data for Mayekawa reciprocating and screw compressor heat pumps, including the N6HK and N160GHS models. It also presents three case studies where Mayekawa heat pumps were installed to produce hot water for district heating, industrial processes, and overcompression applications. The document concludes with information on Mayekawa's global presence and availability of its heat pump products worldwide.
This document describes Guangdong Honny Power-Tech Co., Ltd and Googol Engine-Tech Co., which are power solution and large power engine manufacturers. It provides information on their product lines, which include gas generators from 160kW to 1452kW and large diesel/gas engines. It also details the companies' locations, vision, and standard equipment and components included with their genset and power solutions.
2014 Googol gas generator introduction-googol(1)Mike Renko
Googol Engine-Tech Co. produces gas and diesel engines for power generation. They have manufacturing bases in China and the US. Their product lines include the R series gas generators from 160kW to 500kW and the J series from 600kW to 1452kW. The document provides technical specifications and components for their gas generator sets including engines, alternators, control systems, and other electrical and mechanical components.
10 ta data sheet - flypartsguy.com - 8.2018FrankEasel
This document provides specifications for a Weichai America Corp WP10GTA engine. It includes basic data on displacement, cylinder configuration, aspiration, power ratings, thermal balance, weight and dimensions, cooling system details, lubrication system specs, and fuel consumption curves. The engine is an inline 4-cycle diesel with a bore and stroke of 126mm x 130mm, producing 284.6 kW at 212.2 HP on natural gas and 216.8 kW at 161.7 HP on liquid propane gas under ISO 3046 test conditions.
Satellite chiller package miu dec 2013 - enEUROPAGES
This document describes a satellite chiller package that provides cooling without requiring a machine room. It has a mobile unit design for easy installation, high efficiency, and reliability due to factory manufacturing. The package includes monitoring and automatic control systems. Diagrams show the flow and components of single and dual-unit systems using ammonia refrigerant. Performance specifications are given for summer and winter operation, showing higher efficiency and COP when using automatic Vi control that optimizes condensing temperature. Remote monitoring capabilities include energy use tracking, alarms, trend recording, and optimal control for energy savings.
Presented at Data Centre World, 27/2/13, 11.30am, Facilities Theatre. With many alternative cooling solutions available it can be confusing as to which most improve efficiency and reduce operating costs of a data centre.
Using CFD modelling and actual site data to illustrate best practice, Airedale International Air Conditioning demonstrates the benefits and constraints of available containment options and proposes optimised free-cooling solutions for each application type.
The session was presented by George Hannah, Product Development Director, Airedale International Air Conditioning. George plays a key role in strengthening Airedale’s position at the forefront of precision air conditioning and chiller development, by leading an expanding programme of new product development and the application of new generation technology. His remit is to steer the company's expansion into developing rack level cooling systems and innovative cooling solutions that increase data centre efficiency, raise free-cooling potential and harness and reclaim energy. George heads a product development team of twenty three, including sponsored PhD students and graduate apprentices. He is a chartered mechanical engineer with a B Eng (Hons) from Heriot Watt University.
This document provides an overview of powertrains and discusses key topics like emission requirements, energy sources, transportation energy usage, industry inertia, thermodynamic principles, engine types, sizes, and the convergence of SI and CI technology. It summarizes emission standards over time that have driven a factor of 10 reduction in pollutants every 15 years. It also outlines the energy density benefits of liquid hydrocarbons as a fuel source and charts the historical usage of transportation energy in the US by vehicle type.
This document provides specifications for an Industrial Diesel Generator Set - B1000 50Hz including:
- Power ratings of 1000kVA standby and 909kVA prime
- Technical details on the Baudouin engine, Kohler alternator, cooling and fuel systems
- Dimensions and weights for compact and soundproofed versions
- Performance data at different loads and environmental conditions
- Standard features like the APM403 control panel and protections
- Compliance with international standards for quality and safety
This document provides specifications for an industrial diesel generator set model KD1000-F that produces 1000kVA at 50Hz. It includes details on the generator set such as its engine specifications, alternator specifications, fuel consumption, dimensions, noise levels, and optional control panel models. The generator set is designed to have high reliability and performance for applications such as data centers or mission critical systems.
This document provides specifications for an Industrial Diesel Generator Set - D830 operating at 50 Hz. It includes details on:
- Generator ratings of 825 kVA (Standby) and 750 kVA (Prime)
- Engine specifications including the brand, model, power output, cooling system, and emissions level
- Alternator specifications including the brand, insulation class, voltage regulation, and harmonics
- Control panel options including the APM303, APM403, and APM802
- Dimensions and sound levels for both compact and soundproofed versions
- Standard features and scope of supply
Tdb vrf dvm s standard for turkey (odu 50 hz hp) ver.1.0Haluk TOSUN
This document provides technical specifications for Daikin VRF outdoor units for the Turkish market ranging from 14HP to 30HP. It includes specifications such as unit model names, cooling and heating capacity, power consumption, compressor type, fan performance, piping dimensions, installation limitations, sound levels and unit dimensions. The specifications are organized in tables with detailed footnotes explaining testing conditions.
This document provides specifications for an industrial diesel generator set. It is a 1000 kVA, 800 kWe unit that meets EPA Tier 2 emission standards. It uses a 12 cylinder KOHLER KD series engine. The generator set is available in different enclosure options with sound levels between 77-86 dB(A) at 1 meter depending on the enclosure. It includes standard and optional control panel options to monitor and operate the unit.
This document provides specifications for an Industrial Diesel Generator Set - KD800-E that is 50Hz, emission optimized and EPA Tier 2 compliant. It produces 800kVA in standby mode and 727kVA in prime power mode. The generator set uses a KOHLER KD series engine and commercial KOHLER alternator. It also lists dimensions, sound levels, fuel consumption and control panel options. Performance data is given for the engine along with cooling system, alternator and acoustic enclosure details.
The document discusses integrating solar generation at a thermal power plant to reduce auxiliary power consumption (APC). It proposes mounting solar panels on building roofs and over water reservoirs. This could reduce APC by 1.14%, saving on fuel costs and increasing revenue. Other benefits include earning energy saving certificates, lowering tariffs, and reducing cooling water temperatures. The proposal outlines installing the solar system, potential locations for panels, and interconnecting to the grid and township. Key advantages are listed, along with considerations like maintaining panel efficiency and increased water usage.
This document provides specifications for an Industrial Diesel Generator Set - B900 50Hz including:
- Generator set ratings of 900kVA (720kWe) for standby use and 818kVA (654kWe) for prime power use
- Technical specifications for the Baudouin 12M26G900 engine such as bore, stroke, speed, fuel system details
- Alternator details including brand, voltage regulation, and harmonic distortion levels
- Dimensional details for the compact and soundproofed versions
- Standard features included with the generator set such as the control panel, enclosure, base frame, and manuals
- Emission compliance and applicable codes and standards
This document provides specifications for a trigeneration power plant model called the SpruceTrigen 66 Biogas. It can generate up to 66 kW of total power output from a biogas fueled engine, including 10 kW of net electric power and over 15 kW of hot water output. Key components are a 1000W gas engine, 230/400V alternator, R410a refrigerant compressor, and associated cooling and heating loops. Operating conditions range from -30 to 45 degrees C with noise levels up to 69 dB at 7 meters. Total dimensions are 77x72x158 cm and weight is 310 kg.
Siemens offers a range of industrial gas turbines from 5 to 50 megawatts for power generation and mechanical drive applications. Their gas turbine product line includes 9 models (SGT-100 to SGT-800) that are designed for high efficiency, reliability, and low emissions. The turbines run on natural gas and can also use other fuels. They provide solutions for power generation, cogeneration, mechanical drives, and compression applications in industries such as oil/gas, marine, chemicals and more.
Modeling and Valuing Cogeneration with AURORAxmpEPIS Inc
This document discusses modeling and valuing cogeneration facilities. It provides information on different cogeneration system configurations including simple cycle, combined cycle, and cogeneration systems. Sample calculations are shown for a cogeneration facility with two combustion turbines, heat recovery steam generators, and a steam turbine. Key outputs include the heat balance, fuel chargeable to power production, and inputs for an AURORA valuation analysis model.
Siemens offers an industrial gas turbine product range from 5 to 50 megawatts for power generation and mechanical drive applications. Their gas turbines run on natural gas and offer high efficiency and low emissions. Siemens provides solutions for power producers, industrial plants, and the oil and gas industry involving gas turbine sets, combined heat and power plants, and lifetime service packages.
10 na data sheet - flypartsguy.com - 9.2018FrankEasel
This document provides specifications for a Weichai America Corp WP10GNA engine. It lists technical details such as the engine being an inline 4-cylinder with 9.7L displacement. Performance data is provided for both natural gas and liquid propane operation, including gross and net power ratings at various speeds. Charts show torque, power and fuel consumption curves across the engine speed range. Additional details include dimensions, weight, cooling and lubrication system capacities.
Tc fls sihi_lem_lel_91_to_161_fla_en (pump chan khong)thanh Le
The document describes SIHI liquid ring vacuum pumps models LEM and LEL. Key points:
- They are single-stage, displacement pumps with robust, uncomplicated construction.
- They can handle nearly all gases and vapors, as well as small amounts of entrained liquids. Operation is easy and reliable with low noise and vibration.
- Continuous water supply is needed during operation to remove heat from gas compression and replenish the liquid ring.
- Applications include exhausting dry and humid gases where a vacuum of 33 to 900 mbar is required.
- Specifications and performance characteristics and cutaway diagrams are provided for models LEM/LEL 91, 126, and 161.
This document provides specifications for a Caterpillar 3412C generator set. It can generate between 680-900 kVA at 50 Hz. The generator set has a V-12 four-stroke water-cooled diesel engine that is 27.02L in displacement. It also includes a SR500 alternator, EMCP 4 control panel, radiator cooling system, and other standard equipment. Optional equipment can be added such as circuit breakers, exhaust components, and starting/charging systems. Dimensions and performance data are also listed.
This document provides specifications for a trigeneration power plant model. It produces 14 kW of net electric power and can also provide heated and cooled water. The power plant uses a natural gas engine to drive an alternator and power a refrigerant compressor. It has a total efficiency of 115% and dimensions of 77 x 72 x 158 cm. It is capable of supplying 9.1 kW of electric power to a consumer along with heated and cooled water outputs.
This document outlines a proposed high-efficiency combined cycle power generation system using a helium-cooled very high temperature reactor (VHTR) as the heat source. It describes using the Numerical Propulsion System Simulation (NPSS) code to model the system and analyze the performance of a combined Brayton-Rankine cycle. Key findings from the NPSS analysis of a HiEff/Rankine combined cycle design point include a reactor outlet temperature of 900°C, steam turbine output of 300MWe, gas turbine output of 229MWe, and overall cycle efficiency of 45%. Validation options including a small-scale prototype facility or modifying an existing helium-cooled gas turbine test facility are also discussed.
Performance and emission characteristics on glow plug hot surface ignition c....eSAT Journals
This document summarizes research into using ethanol as a fuel in a diesel engine with glow plug hot surface ignition and various modifications. Key findings include:
- A copper piston crown material engine with additive achieved 5% higher efficiency than a standard engine.
- Lower ignition delays, shorter combustion duration, and higher peak pressures and pressure rise rates were observed with a copper piston crown material engine using ethanol with an additive in a low heat rejection configuration.
- Emissions of hydrocarbons, carbon monoxide, and smoke were lower with the copper piston crown material engine using ethanol with an additive in the low heat rejection setup.
High Performance Computing for Instabilities in Aerospace Propulsion Systemsinside-BigData.com
In this deck from PASC 2019, Thierry Poinsot from Toulouse Fluid Mechanics Institute presents: High Performance Computing for Instabilities in Aerospace Propulsion Systems.
"Combustion produces more than 80 percent of the world's energy. This will continue for a long time as the global energy growth remains much larger than what new renewable energies can provide. Our civilization must allow the growth of combustion sources but, at the same time, keep global warming as well as pollution under control. Science has a key role in this scenario: it must optimize combustion systems far beyond the present state of the art. To do this, one promising path is to use High Performance Computation to compute and optimize combustors before they are built. This talk focuses on aerospace propulsion where optimization often leads to the occurrence of instabilities where combustion couples with acoustics, leading to unacceptable oscillations (the most famous example is the Apollo engine which required 1330 full scale tests to reach acceptable oscillation levels). The talk will show how simulation is used to control these problems, in real gas turbine engines and in rocket engines."
Watch the video: https://wp.me/p3RLHQ-kq4
Learn more: https://pasc19.pasc-conference.org/
Sign up for our insideHPC Newsletter: http://insidehpc.com/newsletter
La norma ISO 14001 establece los requisitos para un sistema de gestión ambiental que puede ser adoptado por cualquier organización para gestionar de manera responsable los impactos ambientales de sus operaciones. La norma se centra en establecer una política ambiental, fijar objetivos y metas, implementar programas para cumplirlos, y revisar periódicamente el sistema para asegurar la mejora continua. La certificación bajo ISO 14001 ayuda a las organizaciones a demostrar su compromiso con la sustentabilidad y el cumplimiento ambiental.
This document provides an overview of powertrains and discusses key topics like emission requirements, energy sources, transportation energy usage, industry inertia, thermodynamic principles, engine types, sizes, and the convergence of SI and CI technology. It summarizes emission standards over time that have driven a factor of 10 reduction in pollutants every 15 years. It also outlines the energy density benefits of liquid hydrocarbons as a fuel source and charts the historical usage of transportation energy in the US by vehicle type.
This document provides specifications for an Industrial Diesel Generator Set - B1000 50Hz including:
- Power ratings of 1000kVA standby and 909kVA prime
- Technical details on the Baudouin engine, Kohler alternator, cooling and fuel systems
- Dimensions and weights for compact and soundproofed versions
- Performance data at different loads and environmental conditions
- Standard features like the APM403 control panel and protections
- Compliance with international standards for quality and safety
This document provides specifications for an industrial diesel generator set model KD1000-F that produces 1000kVA at 50Hz. It includes details on the generator set such as its engine specifications, alternator specifications, fuel consumption, dimensions, noise levels, and optional control panel models. The generator set is designed to have high reliability and performance for applications such as data centers or mission critical systems.
This document provides specifications for an Industrial Diesel Generator Set - D830 operating at 50 Hz. It includes details on:
- Generator ratings of 825 kVA (Standby) and 750 kVA (Prime)
- Engine specifications including the brand, model, power output, cooling system, and emissions level
- Alternator specifications including the brand, insulation class, voltage regulation, and harmonics
- Control panel options including the APM303, APM403, and APM802
- Dimensions and sound levels for both compact and soundproofed versions
- Standard features and scope of supply
Tdb vrf dvm s standard for turkey (odu 50 hz hp) ver.1.0Haluk TOSUN
This document provides technical specifications for Daikin VRF outdoor units for the Turkish market ranging from 14HP to 30HP. It includes specifications such as unit model names, cooling and heating capacity, power consumption, compressor type, fan performance, piping dimensions, installation limitations, sound levels and unit dimensions. The specifications are organized in tables with detailed footnotes explaining testing conditions.
This document provides specifications for an industrial diesel generator set. It is a 1000 kVA, 800 kWe unit that meets EPA Tier 2 emission standards. It uses a 12 cylinder KOHLER KD series engine. The generator set is available in different enclosure options with sound levels between 77-86 dB(A) at 1 meter depending on the enclosure. It includes standard and optional control panel options to monitor and operate the unit.
This document provides specifications for an Industrial Diesel Generator Set - KD800-E that is 50Hz, emission optimized and EPA Tier 2 compliant. It produces 800kVA in standby mode and 727kVA in prime power mode. The generator set uses a KOHLER KD series engine and commercial KOHLER alternator. It also lists dimensions, sound levels, fuel consumption and control panel options. Performance data is given for the engine along with cooling system, alternator and acoustic enclosure details.
The document discusses integrating solar generation at a thermal power plant to reduce auxiliary power consumption (APC). It proposes mounting solar panels on building roofs and over water reservoirs. This could reduce APC by 1.14%, saving on fuel costs and increasing revenue. Other benefits include earning energy saving certificates, lowering tariffs, and reducing cooling water temperatures. The proposal outlines installing the solar system, potential locations for panels, and interconnecting to the grid and township. Key advantages are listed, along with considerations like maintaining panel efficiency and increased water usage.
This document provides specifications for an Industrial Diesel Generator Set - B900 50Hz including:
- Generator set ratings of 900kVA (720kWe) for standby use and 818kVA (654kWe) for prime power use
- Technical specifications for the Baudouin 12M26G900 engine such as bore, stroke, speed, fuel system details
- Alternator details including brand, voltage regulation, and harmonic distortion levels
- Dimensional details for the compact and soundproofed versions
- Standard features included with the generator set such as the control panel, enclosure, base frame, and manuals
- Emission compliance and applicable codes and standards
This document provides specifications for a trigeneration power plant model called the SpruceTrigen 66 Biogas. It can generate up to 66 kW of total power output from a biogas fueled engine, including 10 kW of net electric power and over 15 kW of hot water output. Key components are a 1000W gas engine, 230/400V alternator, R410a refrigerant compressor, and associated cooling and heating loops. Operating conditions range from -30 to 45 degrees C with noise levels up to 69 dB at 7 meters. Total dimensions are 77x72x158 cm and weight is 310 kg.
Siemens offers a range of industrial gas turbines from 5 to 50 megawatts for power generation and mechanical drive applications. Their gas turbine product line includes 9 models (SGT-100 to SGT-800) that are designed for high efficiency, reliability, and low emissions. The turbines run on natural gas and can also use other fuels. They provide solutions for power generation, cogeneration, mechanical drives, and compression applications in industries such as oil/gas, marine, chemicals and more.
Modeling and Valuing Cogeneration with AURORAxmpEPIS Inc
This document discusses modeling and valuing cogeneration facilities. It provides information on different cogeneration system configurations including simple cycle, combined cycle, and cogeneration systems. Sample calculations are shown for a cogeneration facility with two combustion turbines, heat recovery steam generators, and a steam turbine. Key outputs include the heat balance, fuel chargeable to power production, and inputs for an AURORA valuation analysis model.
Siemens offers an industrial gas turbine product range from 5 to 50 megawatts for power generation and mechanical drive applications. Their gas turbines run on natural gas and offer high efficiency and low emissions. Siemens provides solutions for power producers, industrial plants, and the oil and gas industry involving gas turbine sets, combined heat and power plants, and lifetime service packages.
10 na data sheet - flypartsguy.com - 9.2018FrankEasel
This document provides specifications for a Weichai America Corp WP10GNA engine. It lists technical details such as the engine being an inline 4-cylinder with 9.7L displacement. Performance data is provided for both natural gas and liquid propane operation, including gross and net power ratings at various speeds. Charts show torque, power and fuel consumption curves across the engine speed range. Additional details include dimensions, weight, cooling and lubrication system capacities.
Tc fls sihi_lem_lel_91_to_161_fla_en (pump chan khong)thanh Le
The document describes SIHI liquid ring vacuum pumps models LEM and LEL. Key points:
- They are single-stage, displacement pumps with robust, uncomplicated construction.
- They can handle nearly all gases and vapors, as well as small amounts of entrained liquids. Operation is easy and reliable with low noise and vibration.
- Continuous water supply is needed during operation to remove heat from gas compression and replenish the liquid ring.
- Applications include exhausting dry and humid gases where a vacuum of 33 to 900 mbar is required.
- Specifications and performance characteristics and cutaway diagrams are provided for models LEM/LEL 91, 126, and 161.
This document provides specifications for a Caterpillar 3412C generator set. It can generate between 680-900 kVA at 50 Hz. The generator set has a V-12 four-stroke water-cooled diesel engine that is 27.02L in displacement. It also includes a SR500 alternator, EMCP 4 control panel, radiator cooling system, and other standard equipment. Optional equipment can be added such as circuit breakers, exhaust components, and starting/charging systems. Dimensions and performance data are also listed.
This document provides specifications for a trigeneration power plant model. It produces 14 kW of net electric power and can also provide heated and cooled water. The power plant uses a natural gas engine to drive an alternator and power a refrigerant compressor. It has a total efficiency of 115% and dimensions of 77 x 72 x 158 cm. It is capable of supplying 9.1 kW of electric power to a consumer along with heated and cooled water outputs.
This document outlines a proposed high-efficiency combined cycle power generation system using a helium-cooled very high temperature reactor (VHTR) as the heat source. It describes using the Numerical Propulsion System Simulation (NPSS) code to model the system and analyze the performance of a combined Brayton-Rankine cycle. Key findings from the NPSS analysis of a HiEff/Rankine combined cycle design point include a reactor outlet temperature of 900°C, steam turbine output of 300MWe, gas turbine output of 229MWe, and overall cycle efficiency of 45%. Validation options including a small-scale prototype facility or modifying an existing helium-cooled gas turbine test facility are also discussed.
Performance and emission characteristics on glow plug hot surface ignition c....eSAT Journals
This document summarizes research into using ethanol as a fuel in a diesel engine with glow plug hot surface ignition and various modifications. Key findings include:
- A copper piston crown material engine with additive achieved 5% higher efficiency than a standard engine.
- Lower ignition delays, shorter combustion duration, and higher peak pressures and pressure rise rates were observed with a copper piston crown material engine using ethanol with an additive in a low heat rejection configuration.
- Emissions of hydrocarbons, carbon monoxide, and smoke were lower with the copper piston crown material engine using ethanol with an additive in the low heat rejection setup.
High Performance Computing for Instabilities in Aerospace Propulsion Systemsinside-BigData.com
In this deck from PASC 2019, Thierry Poinsot from Toulouse Fluid Mechanics Institute presents: High Performance Computing for Instabilities in Aerospace Propulsion Systems.
"Combustion produces more than 80 percent of the world's energy. This will continue for a long time as the global energy growth remains much larger than what new renewable energies can provide. Our civilization must allow the growth of combustion sources but, at the same time, keep global warming as well as pollution under control. Science has a key role in this scenario: it must optimize combustion systems far beyond the present state of the art. To do this, one promising path is to use High Performance Computation to compute and optimize combustors before they are built. This talk focuses on aerospace propulsion where optimization often leads to the occurrence of instabilities where combustion couples with acoustics, leading to unacceptable oscillations (the most famous example is the Apollo engine which required 1330 full scale tests to reach acceptable oscillation levels). The talk will show how simulation is used to control these problems, in real gas turbine engines and in rocket engines."
Watch the video: https://wp.me/p3RLHQ-kq4
Learn more: https://pasc19.pasc-conference.org/
Sign up for our insideHPC Newsletter: http://insidehpc.com/newsletter
La norma ISO 14001 establece los requisitos para un sistema de gestión ambiental que puede ser adoptado por cualquier organización para gestionar de manera responsable los impactos ambientales de sus operaciones. La norma se centra en establecer una política ambiental, fijar objetivos y metas, implementar programas para cumplirlos, y revisar periódicamente el sistema para asegurar la mejora continua. La certificación bajo ISO 14001 ayuda a las organizaciones a demostrar su compromiso con la sustentabilidad y el cumplimiento ambiental.
El documento describe las posibilidades y limitaciones de las tecnologías de la información y la comunicación (TIC) aplicadas a la educación. Entre las posibilidades se encuentran la interconexión, interactividad e instantaneidad que permiten las TIC, así como la creación de nuevos lenguajes y rompen con la linealidad expresiva tradicional. Sin embargo, también existen limitaciones como la falta de formación del profesorado, distracciones en el aula, y falta de evidencia de mejoras en los resultados académicos de los estudiantes a pesar del
Este documento presenta una propuesta didáctica para explicar el sistema solar a estudiantes de primaria utilizando un video educativo de YouTube. El video muestra imágenes de los planetas y sus características clave. Antes y después del video, los estudiantes realizarán actividades prácticas como colocar los planetas en orden, completar una tabla con información y crear un móvil del sistema solar. El objetivo es que los estudiantes aprendan los componentes y estructura básicos de nuestro sistema planetario.
Betsy Anderson redesigned all print materials for The Philadelphia Foundation to better reflect its branding and market the organization as a whole rather than being donor-centric. She developed new outreach materials on planned giving and oversaw the production of web content and white papers analyzing data from a nonprofit study. Anderson launched the foundation's social media presence including its Facebook, LinkedIn, YouTube, and Razoo pages. She also coordinated redesign of the foundation's website and wrote monthly newsletters.
This document is a resume for Samuel Albert Nathan Israel Bronfen-Quinones. It summarizes his career experiences in public health as a sanitarian for New York City, mass production consulting, and various roles in quality control and production management. His resume highlights over 15 years of experience in scientific fields related to research, dietary supplement production, and public health safety compliance.
El documento trata sobre el trabajo mecánico y la potencia. Define el trabajo mecánico como la transferencia de energía entre un cuerpo y la fuerza que actúa sobre él. Explica cómo se calcula el trabajo realizado por una fuerza constante que desplaza un cuerpo una distancia d formando un ángulo θ con la dirección del movimiento. Además, define la potencia como la cantidad de trabajo realizado por unidad de tiempo y cómo se calcula. Por último, incluye ejemplos numéricos sobre cálculos de trabajo y potencia.
Este documento trata sobre la nutrición para nadadores de alto rendimiento. Explica las necesidades calóricas y de macronutrientes como proteínas, carbohidratos y grasas. También cubre el cronograma de comidas recomendado, con énfasis en la hidratación constante y la alimentación frecuente antes y después del entrenamiento. El objetivo es satisfacer las demandas energéticas sin sentir hambre ni saciedad.
El documento resume varias enfermedades infecciosas y contagiosas, incluyendo:
- Botulismo, una enfermedad neuroparalítica causada por la toxina del Clostridium botulinum que causa parálisis fláccida.
- Enfermedad de Chagas, causada por el parásito Trypanosoma cruzi transmitido por insectos, que puede causar daño cardíaco y del sistema digestivo.
- Gastroenteritis virales comunes en invierno causadas por una variedad de virus como el rotavirus que causan diar
Este documento trata sobre la importancia de la ergonomía y los factores de riesgo en el ámbito laboral. Explica que la ergonomía estudia la relación entre el ser humano y su entorno de trabajo. Identifica factores de riesgo como posturas inadecuadas y carga mental y física excesiva. También presenta soluciones ergonómicas como el diseño adecuado de puestos de trabajo y sugiere reglas para prevenir riesgos laborales.
Este documento proporciona instrucciones sobre cómo usar Microsoft Excel 2013. Explica cómo abrir y cerrar Excel, identifica las partes principales de la interfaz como la cinta de opciones, la hoja de cálculo y la barra de fórmulas, y describe cómo introducir, modificar y desplazarse dentro de los datos en Excel. También incluye ejemplos de teclas de método para realizar estas tareas y fuentes adicionales sobre el uso de Excel.
Enfermedades infectocontagiosas por katerine charanchiKaterineCharanchi
El documento resume varias enfermedades comunes en niños, incluyendo amigdalitis aguda (inflamación de las amígdalas causada principalmente por virus), apendicitis (inflamación del apéndice causada por obstrucción), alergias (reacciones alteradas a sustancias en el ambiente), bronquitis (inflamación de los bronquios causada por infecciones o contaminantes), conjuntivitis (inflamación del ojo causada por infecciones o irritantes), diarrea (aumento en deposiciones causado principalmente por infecciones virales
El documento habla sobre los conceptos de equilibrio energético, los tres tipos de somatotipos (endomórfico, mesomórfico y ectomórfico), el índice de masa corporal y su relación con el sobrepeso y la obesidad. También explica la diferencia entre la grasa corporal visible y la grasa oculta, y los métodos para medir la composición corporal como la grasa, el metabolismo y el músculo esquelético.
LudoPrevención consiste en aplicar técnicas innovadoras para motivar a los trabajadores a involucrarse en los temas de SST/PRL por convicción y no solo por obligación
O documento apresenta um resumo sobre o livro "Teorias de Currículo" de Alice Casimiro Lopes e Elizabeth Macedo. Ele discute as diferentes visões de currículo ao longo da história, incluindo a visão tradicional, tecnicista e crítica, e explica os tipos de teorias de currículo como teorias tradicionais, críticas e pós-críticas.
Este documento describe la sociedad de la información y sus características clave. Introdujo el concepto el sociólogo Daniel Bell en 1973 para referirse a una sociedad donde las tecnologías de la información juegan un papel esencial. La sociedad de la información se caracteriza por la globalización, nuevos sectores laborales, cambio rápido, automatización e interactividad.
GE JebachersGas Engine JGS620 technical specifications
• Gas engine
• General Principal
• 4 stroke principal
• Engine parts
• Product range
• Salient features
• Parts of generators
• Generator working
• Main components of a generator
• Technical Data (at Genset)
• Main dimensions and weights (at genset)
• Connections
• Output / fuel consumption
• Technical data of engine JGS 620
• Thermal energy balance
• Exhaust gas data
• Combustion air data
• Sound pressure level
• Sound power level
Chhattisgarh State Power Generation Company LimitedDeepak Kurrey
This is Chapter 1 of report on Chhattisgarh State Electricity Board.
This was assigned by Communication Skills under Report Writing, APG Shimla University, Shimla, HP
Incepted in 2007, Urja Thermal Solutions is a prominent company engaged in the Manufacturing, Exporting and supplying of Thermal Solutions. The company is working under the valuable assistance of its Owner, Mr. Swapnil Gautam. His successful contribution has helped the company grow in leaps and bounds. The company is located in Mumbai, Maharashtra.
"How Gas Engines can help with the Challenges of a Changing Energy System"Adam Wray-Summerson
Presented by Adam Wray-Summerson, Project & Market Development Manager for Clarke Energy, at the IDGTE Annual Seminar & Luncheon, Thursday 2nd May 2019
This document provides specifications for an FPI 1000P generator set including:
- Power ratings of 1000kVA at 50Hz and 995.2kVA at 60Hz at 0.8 power factor
- Prime and standby power definitions and usage limitations
- Engine model, speed, cooling and lubrication details
- Alternator model, voltage regulation, and performance data
- Standard enclosure dimensions and optional enhanced enclosure specifications
The document provides information about a refinery including:
- It started operating in 1984 as a joint venture and now processes 400,000 BPD of crude oil.
- Its main product yields are gasoline, diesel, jet fuel, and fuel oil.
- It has technical, operations, maintenance, and financial departments.
- Case studies examine crude distillation unit stream flows over 10 years and calculate heat exchanger fouling rates to predict cleaning needs.
- An experience overview discusses the refinery's induction program and a heat exchanger bundle replacement and testing project.
This document provides specifications for a Kohler 125RZG natural gas/LP gas generator set. It includes details on the generator, engine, alternator, cooling system, fuel system, lubrication system, electrical system, air requirements, and fuel consumption. The generator set has a 130 degree C rise alternator, a GM 8.1L V8 engine, and can output up to 130kW in standby mode or 115kW in prime power mode.
CESC, established in 1899, was the first thermal power generation company in India. It supplies power to the city of Kolkata and surrounding areas, serving over 2.4 million people. One of CESC's generating stations is the Southern Generating Station (SGS), located in Kolkata. SGS has two units with a generating capacity of 67.5 MW each, for a total capacity of 135 MW. It uses pulverized coal to power its boilers and generate electricity, which is then supplied to CESC's distribution network. SGS has achieved several performance milestones and certifications related to efficiency, environmental standards, and safety. It utilizes modern equipment and control systems to optimize power generation.
2016.12.14 DryFining Coal Gen presentation FINALSandra Broekema
The document summarizes 6 years of operating experience with DryFining, a coal drying process. It has upgraded 1000 tons per hour of lignite coal since 2009, reducing moisture from 38% to 30% by weight. This has increased the coal's heating value and reduced emissions while improving the net plant heat rate by 4.5%. Case studies show the process can increase generation capacity at coal plants and reduce capital and operating costs. The process provides more flexible, efficient fuel enhancement that benefits both new and existing coal-fired power facilities.
Brochure gas turbine sgt 300 for power generationceshesol71
The SGT-300 is a single-shaft industrial gas turbine from Siemens that produces 7.90 MW of power. It offers high efficiency of 31% and can run on various gaseous and liquid fuels. The compact and reliable design makes it suitable for industrial cogeneration applications producing over 18 tonnes of steam per hour and overall plant efficiencies over 80%. Key features include high efficiencies, low emissions, and on-site maintainability. It is used in power generation, cogeneration, and oil and gas applications.
- A wind farm study analyzed 1 year of wind data from a site including average wind speed, direction, and other parameters.
- Based on the data, a 100m diameter 2MW wind turbine was selected as the optimal design with the lowest LCOE and highest annual energy output.
- Performance simulations were conducted on the turbine, showing how its pitch, speed, power, and forces vary with wind speed.
- For integrating wind power onto the existing grid, the maximum penetration was found to be 10MW of wind (5 turbines), providing around 20% of annual electricity with 30.8% curtailment and a 26.88% capacity factor.
This document provides specifications for a natural gas powered trigeneration plant. The plant uses a Kohler CH-1000 gas engine to generate up to 18 kW of electricity while also providing hot water and chilled water through an absorption chiller. Key specifications include a total efficiency of 115%, electric output of 18 kW, fuel consumption of 8.0 m3/h of natural gas, and dimensions of 77 x 72 x 158 cm. It can provide hot water at 70/50°C, 45/30°C, and chilled water at 12/7°C while running on natural gas.
John Fairbanks of the US Department of Energy presented on thermoelectric developments for vehicular applications. He discussed the DOE's projects with automotive companies to develop thermoelectric generators using waste heat from engines to improve fuel efficiency. The projects aimed to recover at least 8-10% of fuel energy lost as heat and increase fuel economy by 2-9%. Fairbanks also described potential applications of thermoelectric technology for vehicle climate control, battery temperature regulation, and embedded semiconductor cooling.
This document summarizes an hydrogen fueled power plant from Secure Supplies that provides continuous 24 hour electricity and water pumping. It includes specifications for a 150KW hydrogen engine generator set that runs on hydrogen gas with low emissions and fuel consumption. The system is designed for off-grid applications like community power, farms, and mines.
Hydrogen & Bio Gas Engines Generator sets150 kw to 1 mw 1000kwDaniel Donatelli
This document summarizes an hydrogen fueled power plant from Secure Supplies that provides continuous 24 hour electricity and water pumping. It includes specifications for a 150KW hydrogen engine generator set that runs on hydrogen gas with low emissions and fuel consumption. The system is designed for off-grid applications like community power, farms, and mines.
This document is a project report submitted by Sushant Kumar summarizing his one month vocational training at the Kanti Bijlee Utpadan Nigam Limited power plant. The report provides an overview of the plant's operations including the processes of generating electricity from coal, the main boiler and turbine components, and control systems used. It also describes the milling system for pulverizing coal and the light up process for initially igniting the coal furnace.
Presentation on CO2 reduction and fuel saving technologies in steelworks by Dr. Chun-Da Chen of China Steel at "Clean Fossil Fuel Technologies" course in National Cheng Kung University, Taiwan.
Power cars provide power to End-On Generation coaches in Indian Railways. Earlier models had single engines but now have twin engines rated at higher power outputs. The power supply arrangement includes alternators, transformers, and air circuit breakers to control output. Engine accessories include items like oil coolers, pumps, governors and injectors. Modifications have improved safety, such as adding a neutral current reactor to reduce harmonics and interlocking the fire alarm with generator circuit breakers. Maintenance includes cleaning radiators, thermo imaging, and modifying control circuits.
1) Around 47% of the thermal energy used in cement production is wasted, with 35% of that waste heat recoverable to generate up to 30% of a plant's electricity needs.
2) Waste heat recovery reduces operating costs and increases profits, but has not been widely implemented except in China where most installations use steam turbines.
3) New organic Rankine cycle technology provides an alternative to steam turbines for cement plant waste heat recovery, offering efficiencies at lower temperatures without complex vacuum systems.
This document provides specifications for the Honny Googol 200kW/250kVA diesel generator. Some key details include:
- The generator is powered by a PTA780-G1A engine from Guangdong Honny Power Tech Co.
- Engine ratings include 252kW standby power, 230kW prime power, and 230kW continuous power.
- The generator has a typical generation standby output of 275kVA and prime output of 250kVA.
- Additional specifications cover the engine, cooling system, fuel system, electrical system, dimensions, and alternator.
1. Date
Number
Qty. Origin
Unit
price(€)
Total price(€)
1 220000
1.a 70000
1 1 pack IR
2 1pack IR
2.1 1pack IR
3 1pack IR
4 1pack IR
5 1pack IR
6 1pack IR
7 1pack IR
8 1pack IR
9 1pack IR
10 1pack IR
11 1pack IR
2.b 85000
1 1 pack IR
2 1pack IR
3 1pack IR
Proposal of CHP power generation ( 18MW ) for Khoramshahr Power Plant
Dana Noavaran Energy & industry Co.
Engineering
Genset
Lubricating oil system
Overhead Cranes
Emergency Diesel Generator (1250 KVA)
Power Transformer (11/33KV),3MVA
ONAN-OCT
20KV Switchgear Panels
Mechanical Engineering
Electrical Engineering
Water Treatment System
HVAC
Evaluation of Heat Consumption Market
Detailed Design of Heat recovery system
Exhaust gases system
Cooling system
Fuel gas system
Fire Fighting System
Power Plant LV Panels
Procedure
1
2. Date
Number
Qty. Origin
Unit
price(€)
Total price(€)
Proposal of CHP power generation ( 18MW ) for Khoramshahr Power Plant
Dana Noavaran Energy & industry Co.
Procedure
4 1pack IR
5 1pack IR
6 1pack IR
7 1pack IR
8 1pack IR
9 1pack IR
10 1pack IR
11 1pack IR
12 1pack IR
13 1pack IR
III. 65000
1 1 pack IR 40000
1.1
1.1.1
1.1.2
1.1.3
Control Panel for Monitoring and Control
of entire 9 Generators and substation
sequences with Operator and engineering
stations
Auxiliary Transformer
Earthing and Lighting System,Cables
Cable Tray and Terminations
Detialed Design
Generator – Transformer Unit Protection
Panel
Generator Metering Panel
Power plant Control panels
Civil Engineering
110V DC System
Power Plant protection panels
11KV Suitable Generator NGR
Calculation Data Sheet
Engine Room
Plant Civil & Architectal Design
Layout
2
3. Date
Number
Qty. Origin
Unit
price(€)
Total price(€)
Proposal of CHP power generation ( 18MW ) for Khoramshahr Power Plant
Dana Noavaran Energy & industry Co.
Procedure
1.1.4
1.2
1.2.1
1.2.2
1.2.3
1.2.4
1.3
1.3.1
1.3.2
1.3.3
1.3.4
2 1 pack 25000
2 10144000
2.a 8514000
1 9 set EU 750000 6750000
Part Description
1.1.2 Engine type
MTU
20V4000L62
1.1
Engineering Procurement
Mechanical Engineering Procurement
Evaluation of Soil, water sources,Power Grid
Detialed Design
Calculation Data Sheet
Layout
Switchgear Room
MTO
Genset
MTO
Engine Specification
Detialed Design
Calculation Data Sheet
Layout
Plant Control Room
MTO
3
4. Date
Number
Qty. Origin
Unit
price(€)
Total price(€)
Proposal of CHP power generation ( 18MW ) for Khoramshahr Power Plant
Dana Noavaran Energy & industry Co.
Procedure
1.1.3 Cylinder arrangement V
1.1.4 Number of cylinder 20
1.1.5 Bore /stroke 170/210 mm
1.1.6 volume 9533 liter
1.1.7 Speed 1500 rpm
1.1.8 Mean piston speed 10.5 m/s
1.1.9 Compression ratio 12.1:1
1.1.10 Mean effective pressure 16.8 bar
1.1.11
Standard power according to
ISO 3046
2000 kWmech
1.1.12 Specific full-load consumption
2.42
kWh/kWhmech
1.1.13
Gas consumption(based on
LHV = 10/03 kWh/m3n)
482.9 m3/h
1.1.14 Lube oil consumption 0.3 g/kWhmech
1.1.15 Electric starter
2 x 9 kW, 24
VDC
Part Description
1.2.1 Generator spannung 1100 V
1.2.2 Rating 2744 KVA
1.2.3 Insulation class F
Generator specificatoin
1.2
4
5. Date
Number
Qty. Origin
Unit
price(€)
Total price(€)
Proposal of CHP power generation ( 18MW ) for Khoramshahr Power Plant
Dana Noavaran Energy & industry Co.
Procedure
1.2
1.2.4 Temperature-rise rating F
1.2.5 Cos ɸ 0.8-1
1.2.6 Frequency 50Hz
1.2.7 speed 1500 rpm
1.2.8 efficiency 97.50%
1.2.9 Stator connection Star star
1.2.10 Voltage tolerance ± 5%
1.2.11 Frequency tolerance ± 5%
1.2.12 Max. Ambient temperature. 40°C
1.2.13 Installation altitude max. 1000m
1.2.14 Type of protection IP 23
1.3
1.3.1
1.3.1.1 Thermal output 1244 KW
1.3.1.2
Cooling water temperature,
inlet / outlet
78 / 90°C
1.3.1.3 Cooling water volume flow 94m³/h
1.3.1.4 Pressure loss 2.6 bar
Heat Generation
Engine Cooling
Generator specificatoin
5
6. Date
Number
Qty. Origin
Unit
price(€)
Total price(€)
Proposal of CHP power generation ( 18MW ) for Khoramshahr Power Plant
Dana Noavaran Energy & industry Co.
Procedure
1.3.2
1.3.2.1 Thermal output 99 KW
1.3.2.2
Mixture cooling water volume
flow
30 m³/h
1.3.2.3
Inlet temperature mixture
cooling water max.
52°C
1.3.2.4
Outlet temperature mixture
cooling water max.
55°C
1.3.2.5
Maximum permissible
pressure loss outside the heat
recovery
0.5 bar
1.3.2.6
System pressure permitted
maximum
6 bar
1.3.3
1.3.3.1 Thermal output by 120°C 1089 KW
1.3.3.2 Exhaust temperature 444°C
1.3.3.3 Exhaust gas mass flow, dry 10027 kg/h
1.3.3.4 Exhaust gas mass flow, moist 10787 kg/h
1.3.3.5 Exhaust gas volume flow, dry 7607 m³/h
1.3.3.6
Exhaust gas volume flow,
moist
8498 m³/h
1.4 Engine manegment system MMC-400
1.3.3.7
Permissible back-pressure
downstream of engine min. /
max.
30 / 60 mbar
Mixture Cooling
Exhaust Gas
6
7. Date
Number
Qty. Origin
Unit
price(€)
Total price(€)
Proposal of CHP power generation ( 18MW ) for Khoramshahr Power Plant
Dana Noavaran Energy & industry Co.
Procedure
2 9 set EU 72000 648000
2.1
2.2
3 9 set IR 16000 144000
3.1
3.2
3.3
3.4
3.5
4 1 pack IR 36000 36000
4.1
4.2
4.3
4.4
4.5
4.5
5 1 pack IR 65000 65000
5.1
steam heat exchanger system with 622 KW
Thermal power
Heat Recovery System
HVAC
hot water heat exchanger system with 524 KW
Thermal power(Hot water max 80 C)
Firefighting pump house
Water treatment package
Water Treatment System
Diffusers
Distribution Duct
Control & Admin room air condition Unit
Fire Fighting System
Miscellaneous pumps
Chemical storage tanks
Waste water treatment
Raw water tank
Engine room ventilation & Exhaust fan
Engine room Air condition (Air Washer)
Permeate water tank
7
8. Date
Number
Qty. Origin
Unit
price(€)
Total price(€)
Proposal of CHP power generation ( 18MW ) for Khoramshahr Power Plant
Dana Noavaran Energy & industry Co.
Procedure
5.2
5.3
5.4
5.5
5.6
6 1 pack IR 68000 68000
6.1
6.2
6.3
7 1pack IR 42000 42000
7.1
7.2
7.3
7.4
8 9 IR 38000 342000
8.1
8.2
8.3 Standby heater
Maintenance water tank
Expansion tank
Pipework for gas distribution
Gas regulating station (250 psi to 60 psi)
Fuel gas system
pipework for sprinkler
Fire alarm system
CO2 for transformers & control room
Foam tank
Cooling system
Elastic hoses
Waste lube oil tank
Lube service tank
Lube oil storage tank
Lubricating oil system
Pipework for gas venting
Sprinkler
8
9. Date
Number
Qty. Origin
Unit
price(€)
Total price(€)
Proposal of CHP power generation ( 18MW ) for Khoramshahr Power Plant
Dana Noavaran Energy & industry Co.
Procedure
8.4
8.5
9 9 set IR 22000 198000
9.1
9.2
9.3
9.4
11 3 set IR 32000 96000
12 1 set IR 125000 125000
12.1
12.2
12.3
2.b 1340000
13 9 set IR 95000 855000
14 1pack IR
15 1 set IR
16 1 set IR
18 9 set IR
240000
20KV Switchgear Panels
Power Plant LV Panels
11KV Suitable Generator NGR
240000
Generator – Transformer Unit Protection
Panel
Power Transformer (11/33KV),3MVA ONAN-
OCT
Raidiator Cooler
Circulated pump
Electrical Engineering Procurement
Overhead Cranes
Emergency Diesel Generator (1250 KVA)
Gas oil storage tank
Gas oil daily tank
Automatic transfer switch
Exhaust Stack
Oxidization catalyst convertor
Exhaust silencer
Exhaust duct
Exhaust gases system
9
10. Date
Number
Qty. Origin
Unit
price(€)
Total price(€)
Proposal of CHP power generation ( 18MW ) for Khoramshahr Power Plant
Dana Noavaran Energy & industry Co.
Procedure
19 9 set IR
20 1 set IR
21 1 set IR
22 1 set IR
21 1 pack IR 145000 145000
22 1 set IR 45000 35000
23 1 pack IR
24 1pack IR
2.c 290000
26 1 pack
27 1 pack
28 1 pack
29 1 pack
30 1 pack
31 1 pack
32 1 pack
240000
Civil Engineering Procurement
240000
65000
Cable Tray and Terminations
Generator Metering Panel
Power plant Control panels
Power Plant protection panels
110V DC System
Genset Foundation
Warehouse Building
Machine Room Structure
Switchgear Room Stucture
Plant control Room structure
Office room Stucture
Salon Foundation
Control Panel for Monitoring and Control of
entire 9 Generators and substation sequences
with Operator and engineering stations
Auxiliary Transformer
Earthing and Lighting System,Cables
65000
10
11. Date
Number
Qty. Origin
Unit
price(€)
Total price(€)
Proposal of CHP power generation ( 18MW ) for Khoramshahr Power Plant
Dana Noavaran Energy & industry Co.
Procedure
33 1 pack
34 1 pack
35 1 pack
36 1 pack
37 1 pack
3 693550
3.a 305550
1 9 IR 11000 99000
2 9 IR 4000 36000
Construction
Mechanical Installation
Genset
Transport of all equipment to iranian border
custom
Erection
Assembly
Piping
Cabeling
Combustion air ducting
Testing,Start up , Commissioning & Training
Heat recovery system
Transportation
Erection
Landscaping
Security Building
Water treatment pump station Building
Fire Fighting pump station Building
Excavation
11
12. Date
Number
Qty. Origin
Unit
price(€)
Total price(€)
Proposal of CHP power generation ( 18MW ) for Khoramshahr Power Plant
Dana Noavaran Energy & industry Co.
Procedure
3 9 IR 1600 14400
4 1 5400 5400
5 1 12000 12000
Testing
Fire Fighting System
Transportation
Water treatment System
Transportation
Erection
Piping
Cabeling
Erection
Piping
Ducting
Cabeling
Testing
Pipe and piping work for Heat exchanger
Cabeling
Testing
HVAC
Transportation
12
13. Date
Number
Qty. Origin
Unit
price(€)
Total price(€)
Proposal of CHP power generation ( 18MW ) for Khoramshahr Power Plant
Dana Noavaran Energy & industry Co.
Procedure
6 1 11600 11600
7 1 8400 8400
8 9 7600 68400Cooling system
Transportation
Erection
Piping
Cabeling
Testing
Erection
Piping
Cabeling
Testing
Lubricating oil system
Cabeling
Testing
Fuel gas system
Transportation
Construction
Erection
Piping
13
14. Date
Number
Qty. Origin
Unit
price(€)
Total price(€)
Proposal of CHP power generation ( 18MW ) for Khoramshahr Power Plant
Dana Noavaran Energy & industry Co.
Procedure
9 9 3300 29700
10 3 4800 14400
12 1 6250 6250
Testing
Emergency Diesel Generator
Transportation
Erection
Testing
Overhead Cranes
Transportation
Erection
Cabeling
Testing
Exhaust gases system
Transportation
Erection
Ducting
Transportation
Erection
Piping
Cabeling
14
15. Date
Number
Qty. Origin
Unit
price(€)
Total price(€)
Proposal of CHP power generation ( 18MW ) for Khoramshahr Power Plant
Dana Noavaran Energy & industry Co.
Procedure
3.b 268000
1 1
2 1
3 1
4 1
5 1
6 1
7 1
8 1
9 1
10 1
11 1
3.c 120000
26 1
Installation of 110 V DC
Electerical Installation of auxiliary
transformers
Installation of medium voltage system
Test,Start up & Commissionig
Installation of low voltage Switchgear
Installation of station auxiliary
transformers
Cabeling
Testing
Installation Of Electrical Equipment
Electrical installation of generators
Installation of automation system
Installation of system Grounding system
Plant electrification
Installation Of transmission line
Piping
Civil construction
Machine Room Structure
Construction
15
16. Date
Number
Qty. Origin
Unit
price(€)
Total price(€)
Proposal of CHP power generation ( 18MW ) for Khoramshahr Power Plant
Dana Noavaran Energy & industry Co.
Procedure
1
27 1
28 1
29 1
30 1
31 1
32 1
33 1
34 1
Switchgear Room Stucture
Construction
Plant control Room structure
Transportation
Construction
Genset Bedframe
Construction
Fire Fighting pump station Building
Construction
Erection
Office room Stucture
Construction
Salon Foundation
Construction
Excavation
Warehouse Building
Construction
Water treatment pump station Building
16
17. Date
Number
Qty. Origin
Unit
price(€)
Total price(€)
Proposal of CHP power generation ( 18MW ) for Khoramshahr Power Plant
Dana Noavaran Energy & industry Co.
Procedure
35 1
36 1
4 115000
898000
1772000
155000
573550
475000
11172550EPC & Testing
Mechanical BOP & Electrical BOP
Genset & Auxiliary
Mechanical & Electrical engineering
Mechanical & Electrical installation
Civil Engineering & Construction
Testing, Filling & 3 months Operation
Security Building
Construction
Landscaping
Construction
17