This document provides an overview of a chemistry module covering reaction rates and chemical equilibrium. It is divided into three lessons: 1) Factors affecting rates of reaction, 2) Factors affecting chemical equilibrium, and 3) Applications of chemical equilibrium. Lesson 1 discusses how the rate of a chemical reaction can be altered by changing factors like the nature and size of reactants, concentration, temperature, and presence of a catalyst. Lesson 2 explains the concept of chemical equilibrium as a dynamic balancing point, and how equilibrium can be influenced by adding or removing reactants/products or by changing pressure and temperature based on Le Chatelier's principle. The goal is for students to understand what controls the speed and direction of chemical changes.
Learning objectives:
Identify the different subsystems that make up the earth
Describe the interactions that transpire in each subsystem
Diagram the subsystems that make up the earth including the interactions that transpire in each interface.
Explain that the Earth consists of four subsystems, across whose boundaries matter and energy flow
Learning objectives:
Identify the different subsystems that make up the earth
Describe the interactions that transpire in each subsystem
Diagram the subsystems that make up the earth including the interactions that transpire in each interface.
Explain that the Earth consists of four subsystems, across whose boundaries matter and energy flow
Colligative properties of dilute solutions: lowering of vapour pressure, elevation of
boiling point, depression of freezing point and osmotic pressure including necessary
thermodynamic derivations.
An introduction to rates of reaction in Chemistry. Uses the runaway nuclear reaction in Fukushima (2011) to demonstrate how rates of reaction can be modified. Note that a nuclear reaction is not a chemical reaction.
Essay about Chemistry
Essay about Chemistry Lab
Chemistry In Chemistry
Chemistry
Chemical Element Essay
Whats Organic Chemistry Essay
The History of Chemistry Essay
The History of Chemistry Essay
Chemical Reactions Essay
Chemistry Essay
Chemistry Essay
Green Chemistry Essay
a presentation about types of chemical reaction for class 10th u s s s s sssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssss gggggggggggggggggggggggggggg g gg v vv c cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
Chemical reactants are substances that undergo a chemical reaction to form new substances. There are several types of chemical reactants based on their roles and participation in reactions. Here are some common types of chemical reactants:
Reactants
These are the primary substances that undergo a chemical change during a reaction.
Reactants are consumed during the reaction and are transformed into products.
Example: In the combustion of methane (
�
�
4
CH
4
+
�
2
O
2
→
�
�
2
CO
2
+
�
2
�
H
2
O), methane (
�
�
4
CH
4
) and oxygen (
�
2
O
2
) are the reactants.
Precipitates
Precipitates are solid substances that form during a chemical reaction in a solution.
They are often formed when two aqueous solutions react and a solid product (precipitate) is insoluble and separates from the solution.
Example: Mixing solutions of silver nitrate (
�
�
�
�
3
AgNO
3
) and sodium chloride (
�
�
�
�
NaCl) results in the formation of a white precipitate of silver chloride (
�
�
�
�
AgCl).
Acids and Bases
Acids and bases are types of reactants that participate in acid-base reactions.
Acids donate protons (
�
+
H
+
) while bases accept protons.
Example: In the reaction between hydrochloric acid (
�
�
�
HCl) and sodium hydroxide (
�
�
�
�
NaOH),
�
�
�
HCl (acid) reacts with
�
�
�
�
NaOH (base) to produce water (
�
2
�
H
2
O) and sodium chloride (
�
�
�
�
NaCl).
Oxidizing and Reducing Agents
Oxidizing agents gain electrons and are reduced during a reaction.
Reducing agents lose electrons and are oxidized during a reaction.
Example: In the reaction of iron (
�
�
Fe) with oxygen (
�
2
O
2
), oxygen acts as the oxidizing agent, while iron acts as the reducing agent to form iron oxide (
�
�
2
�
3
Fe
2
O
3
).
Catalysts
Catalysts are substances that speed up chemical reactions by lowering the activation energy, but they themselves are not consumed or permanently changed.
They provide an alternative pathway for the reaction to occur more rapidly.
Example: Enzymes in biological systems act as catalysts for various metabolic reactions.
Solvents
Solvents are substances in which reactions take place or in which reactants are dissolved.
They do not undergo a chemical change themselves during the reaction.
Example: Water (
�
2
�
H
2
O) is a common solvent used in many chemical reactions, particularly in aqueous solutions.
These are some fundamental types of chemical reactants based on their roles and behaviors in chemical reactions. Depending on the nature of the reaction and the substances involved, various combinations of these reactant types can participate to produce new products.
Smart eTeach offers for schools kids educational academic DVD for all subjects complete study material, CBSE Animated Content Video Lessons,ERP on-line category one to twelve. If you want Any Informations regarding the tutorial product please contact to Smarteteach.
Visit Website: www.smarteteach.com
Contact us at www.smarteteach.com/contactus
Similar to Chem m17 reaction rates & equilibrium (16)
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Neuro-symbolic is not enough, we need neuro-*semantic*Frank van Harmelen
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
"Impact of front-end architecture on development cost", Viktor TurskyiFwdays
I have heard many times that architecture is not important for the front-end. Also, many times I have seen how developers implement features on the front-end just following the standard rules for a framework and think that this is enough to successfully launch the project, and then the project fails. How to prevent this and what approach to choose? I have launched dozens of complex projects and during the talk we will analyze which approaches have worked for me and which have not.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
Key Trends Shaping the Future of Infrastructure.pdf
Chem m17 reaction rates & equilibrium
1. (Effective Alternative Secondary Education)
CHEMISTRY
MODULE 17
Reaction Rates and Equilibrium
BUREAU OF SECONDARY EDUCATION
Department of Education
DepEd Complex, Meralco Avenue
Pasig City
2. - 2 -
Module 17
Reaction Rates and Equilibrium
What this module is about
This module is all about the speed of chemical reactions and chemical equilibrium.
Some reactions are very fast like the burning of wood while others are very slow, like the
rusting of iron. Some reactions go to completion, that is, all the reactants are converted to
products. However, upon forming the product some reactions will revert to reactants
because of an equilibrium that exist. Understanding the factors affecting the rate or speed
of chemical reactions and the chemical equilibrium will help you appreciate the chemical
changes happening around you.
To make the discussion easy for you, the module is divided into three (3) lessons:
Lesson 1 – Factors Affecting Rates of Reaction
Lesson 2 – Factors Affecting Chemical Equilibrium
Lesson 3 – Applications of Chemical Equilibrium
What you are expected to learn
After going through this module, you should be able to:
1. define and differentiate exothermic and endothermic reactions.
2. describe the factors affecting the rate of reactions.
3. explain the Le Chatelier’s principle.
4. write an equilibrium expression.
How to learn from this module
Here are some pointers to remember as you go over this module.
1. Read and follow the instructions carefully.
2. Answer the pretest before reading the content of the module.
3. - 3 -
3. Take down notes and record points for clarification.
4. Always aim to get at least 70% of the total number of items given.
5. Be sure to answer the posttest at the end of the module.
What to do before (Pretest)
Take the pretest before proceeding to the lessons. Check your answers by referring to the
answer key on the last page of the module.
I. Write TRUE if the statement is correct, otherwise write FALSE.
_______________ 1. The speed of chemical reactions can be altered by adding a catalyst.
_______________ 2. When a chemical reaction gives off heat, it is an exothermic reaction.
_______________ 3. The speed of chemical reaction increases as the particle size
increases.
_______________ 4. When chemical equilibrium is achieved, there is no change in the
concentration of reactants and products.
_______________ 5. Heating causes more products to be formed for an endothermic
reaction.
II. Write whether the direction of the reaction will go FORWARD, REVERSE or NO
CHANGE.
2 A(g) + B(g) ↔ Q(g) + heat
_______________ 1. Pressure increased
_______________ 2. Volume decreased
_______________ 3. 2A removed
_______________ 4. B added
_______________ 5. System was cooled.
_______________ 6. Catalyst was added.
_______________ 7. Q was collected.
_______________ 8. Both B and Q were removed; same amount.
_______________ 9. Temperature was increased.
_______________ 10. Both B and Q were added; same amount.
Key to answers on page 14.
4. - 4 -
Lesson 1. Factors Affecting Reaction Rates
When you burn wood, heat is produced. We use this heat to cook our food or boil
water. The chemical reaction in this case is the burning of wood and since heat is given off,
we say the reaction is EXOTHERMIC. So we define an exothermic reaction as a reaction
where heat is evolved or given off.
When you mix urea and water, the container of the mixture feels cold. This is an
example of ENDOTHERMIC reaction, a reaction wherein heat is absorbed. To represent an
exothermic reaction, the value of change in enthalpy (∆H) is negative while for the
endothermic reaction, the value is positive. Enthalpy refers to the heat content measured
at constant pressure.
Exothermic reaction: Reactants → Products
C + O2 → CO2 ∆H = -393.5 kJ/mol
Endothermic reaction: Reactants → Products
N2 + O2 → 2NO ∆H = +180 kJ/mol
Aside from being exothermic or endothermic, chemical reactions taking place around
you are also sometimes very fast or very slow. Burning is a very fast chemical reaction
while the rusting of iron is slow. If a certain chemical reaction is desirable or useful like the
production of drugs to cure diseases, we want the chemical reaction to happen fast so we
can produce more in a short period of time. Is there anything we can do to alter the rate or
speed of chemical reaction?
Did you know that firecracker explosion is an example of an exothermic reaction…a
very fast exothermic reaction!
Turn the page and do Activity 1.1 to observe the rate of dissolution of sugar.
What you will do
Activity 1.1 The Rate of Dissolving Rock and Powder Sugar
Materials: Rock sugar Two (2) drinking glasses (same size)
Powder sugar Spoon
Water Watch
Procedure:
1. Pour water up to the same level on two drinking glasses.
5. - 5 -
2. Take a pinch of sugar and drop it in one of the glasses. Do not stir. After one
minute, stir the glass slowly until no sugar can be seen. Record the time it takes
for the sugar to be dissolved completely.
3. Repeat procedure no. 2, this time use rock sugar. The size of your rock sugar
should be that of a mongo bean.
Analysis:
How much time did it take the powder sugar to dissolve completely? How about the
rock sugar? Why is this so?
The speed or rate of chemical reactions is altered or changed by the following
factors:
1. Nature and size of the reactants
2. Concentration of the reactants
3. Temperature
4. Presence of Catalyst
Nature and Size of the Reactants
The activity demonstrated that particle size can increase or decrease the rate of
reaction. Though no chemical reaction has taken place, the rate of dissolution of sugar is
faster for the powder sugar than the rock sugar. Similarly, the wood we use to cook our
food is chopped to a desirable size so it will burn easily. If we do not chop the wood, it will
take more time for the wood to burn.
You also observe that some metals do not form rust while others do. Rusting is a
chemical reaction wherein the metal reacts with oxygen present in the air. The rust formed
is the product of that reaction. Gold does not rust but iron forms rust. Though both are
metals, gold does not react with oxygen while iron does.
Some elements have different physical forms. An example is the crystalline form of
diamond and graphite. Though the diamond and graphite are two different forms, both are
made up of the same element - carbon. Carbon exhibits ALLOTROPHY. Another example
of an element exhibiting allotrophy is phosphorus. One is color white and the other is red.
Between the two, white is more reactive. It burns readily when exposed to air while the red
phosphorus does not. Red phosphorus is less dangerous and can be stored for long
periods of time without exploding. However, to store white phosphorus, it has to be
submerged in water. Even though both are made up of the same element, their chemical
behaviors are different.
6. - 6 -
Concentration: The Law of Mass Action
The rate of the reaction is also observed to be proportional to the concentration of the
reacting system. This simply means that the greater the number of reacting components
present in a container, the more reaction will occur in a given time. An example of this is the
concentration of acids. If you have one (1) molar hydrochloric acid (HCl) and you drop a
metal zinc, the gas produced from the reaction is slow. However, if you have a six (6) molar
HCl, the reaction is very fast and you can see lots of bubbles forming. Six (6) molar HCl is
corrosive as well. Great care has to be observed in handling this acid.
Temperature
What is the reason why foods stored in the refrigerator stay longer? The answer is
temperature! Temperature can either increase or decrease the rate of reaction. The spoiling
of food indicates that an undesirable chemical reaction has taken place. During summer,
foods are easily spoiled. To avoid spoilage, these are stored inside the refrigerator.
In the same manner, desirable chemical reactions have to be carried out swiftly and
to achieve this, temperature is elevated. Commercially, reaction mixtures are heated and
then mixed. Extreme caution is required if the reaction is to be conducted at high
temperature. However, some of the reactants are destroyed at high temperature. Instead
of obtaining the desired valuable product, none is collected because the reactant has
already decomposed to some worthless compound. What then can be done?
Presence of Catalyst
If the desired reaction has to be carried out swiftly, without elevating the temperature
too much, CATALYSTS are used. Catalysts are substances that alter the rate of chemical
reaction without being consumed. It simply means that catalysts take part in the reaction but
after the reaction has been completed, they can be recovered and used again.
Catalysts alter the rate of reaction and therefore, these can increase or decrease the
rate of a particular reaction. When a catalyst increases the rate of the chemical reaction, it
is said to be a POSITIVE CATALYST or simply named catalyst. If it slows down the
reaction it is called a NEGATIVE CATALYST or it is commonly called an INHIBITOR. How
do catalysts accomplish this altering action? They do so by providing an alternative step or
path for the reaction to occur; they make short-cuts to reach their destination.
Catalysts can be of metals, ions, acids or bases. Inside our body, we have catalysts.
These are called ENZYMES. Enzymes do amazing tasks like converting the food we eat to
energy, and maintaining and repairing our cells.
As an application of what we have learned, let us take a look at the formation of
ammonia, NH3. Ammonia is a very important industrial chemical and has many uses, one of
which is in the manufacture of fertilizers. Ammonia is formed from the reaction of hydrogen
gas, H2, and nitrogen gas, N2. The reaction is written this way:
7. - 7 -
Hydrogen gas + Nitrogen gas → Ammonia gas
3H2 (g) + N2 (g) → 2NH3 (g)
The reaction is carried out at a higher pressure and at a slightly elevated
temperature. Yet, it is still slow. The temperature cannot be elevated too much due to
limitations imposed by chemical equilibrium. To overcome this problem, a catalyst is used.
We will study the detail of this reaction when we go to chemical equilibrium.
What you will do
Self-Test 1.1
I. Classify whether the reaction is endothermic or exothermic.
_______________ 1. Ice making
_______________ 2. H2O(l) → H2O(g)
_______________ 3. H2O(l) → H2O(s)
_______________ 4. CH3OH(g) → CO(g) + 2H2(g) ∆H = 90.2 KJ/mol
_______________ 5. CH2O(g) + H2(g) → CH3OH(g) ∆H = -92.2 KJ/mol
II. Indicate the factors that affect the rate of chemical reactions.
_______________ 1. Rusting of iron but not gold
_______________ 2. Spoiling of food at a warmer temperature
_______________ 3. Fermentation of sugars to alcohol using yeast
_______________ 4. Copper oxide speeds up the decomposition of H2O2 (hydrogen
peroxide)
_______________ 5. Grinding of calcium carbonate before calcining
Lesson 2. Factors Affecting Chemical Equilibrium
You can observe many fascinating events in a circus like a tiger jumping through a
ring of fire or clowns juggling balls. The most daring act, however, is when a performer
walks on a rope that is elevated several feet above the ground, crossing from one end to the
other. You can see the rigid training he underwent just to perform this balancing act.
In chemistry, a balancing act also occurs. This balancing act is what we call
chemical equilibrium. It is a dynamic state, not a static one. It is a state achieved when the
Key to answers on page 15.
8. - 8 -
rate of forming the product is the same as the rate of reverting the product back to its
reactants.
Forward reaction: REACTANTS → PRODUCTS
Reverse reaction: PRODUCTS → REACTANTS
We simply represent this as
REACTANTS ↔ PRODUCTS
The important concept here is that when the reactants are converted to products, the
products will revert to reactants. The speed of the forward reaction or product formation, is
the same as the speed of the reverse reaction or reactant formation. If this is the case, how
much reactants and products are there? Will the concentration of the reactants and product
change after a long period of time since reverse reaction is happening?
The answer is that there is no tendency for the concentration of the reactants and
products to change once they reached equilibrium. There is a particular numerical value for
the ratio of the products and reactants upon reaching equilibrium and this is the
EQUILIBRIUM CONSTANT, Kc, a characteristic property of the reaction system. The
equilibrium constant is expressed as:
][Reactants
[Products]
Kc =
The products referred to is the concentration of products at equilibrium, raised to its
stoichiometric coefficient. Likewise the reactant is the concentration of the reactants at
equilibrium raised to its stoichiometric coefficient. As an illustration, we write the equilibrium
expression for the given reaction as
H2 (g) + I2 (g) ↔ 2HI (g)
]][I[H
[HI]
Kc
22
2
=
In writing the equilibrium expression for a particular reaction, only GASES and
AQUEOUS SOLUTION (aq) are included. The solid and liquid states for both the reactants
and products are NOT INCLUDED.
So, if a certain chemical reaction is given, and you were asked to write its Kc, you
present it as the ratio of products and reactants raised to its respective stoichiometric
coefficient. An example is the decomposition of calcium carbonate to calcium oxide and
carbon dioxide. Take note of the state of the reactants and products.
CaCO3 (s) ↔ CaO (s) + CO2 (g)
9. - 9 -
We write the expression as
Kc = [CO2]
Le Chatelier’s Principle
If our chemical system is already at equilibrium, can we disturb it? Suppose we want
to collect more of the products rather than just allow the products to go back as reactants, is
there something we can do to shift the reaction towards the formation of products? The
answer is yes and this is based on Le Chatelier’s principle.
Le Chatelier, a french chemist, observed that when a system was already at
equilibrium and a disturbance or stress was applied, the system reacted in such a way that
stress was relieved and an equilibrium state was achieved. Picture it as a see-saw in a
balanced position. If you add weight, the see-saw will adjust the added weight so that the
balanced position can be achieved. If we can disturb the equilibrium thereby favoring the
reaction we want, what are we going to adjust? What are the factors that can affect
equilibrium? There are three things that we can do:
1. We add or remove one or more of the substances.
The direction of the reaction will move to where the disturbance or stress is
applied. Where will it be moved, to the left or to the right? Consider the reaction
below:
H2 (g) + I2 (g) ↔ 2HI (g)
If we add more of either one of the substances in the reactant side, we are
disturbing the equilibrium. There is now an increase in the concentration of the
reactants and this disturbed the equilibrium. To relieve this disturbance or stress, the
direction of the reaction will move to the right, forming more products. The change in
the direction of the reaction therefore relieves the stress on the reactant side.
If we remove HI in the product, this will favor the forward reaction. HI
concentration has now decreased. To attain equilibrium, add HI, then the direction of
the reaction will shift backward.
2. Increasing the pressure favors the lesser number of moles.
For the same reaction, we see that the total number of moles of the reactants
and product are the same. Pressure has no effect on this reaction system.
H2 (g) + I2 (g) ↔ 2HI (g)
1mole 1mole 2moles
However if we consider the formation of ammonia, there is now a difference in
the total number of moles of the reactants and product. Previously, the reaction was
written in one direction only, but this time it is a reversible reaction. If we increase the
10. - 10 -
pressure, the direction will go to the right, its total number of moles is only two (2)
while there are four (4) on the left.
3H2 (g) + N2 (g) ↔ 2NH3 (g)
3moles 1mole 2moles
The relation of pressure and volume are inversely proportional. If we increase
the pressure, the volume will decrease. If volume is increased, pressure will
decrease and this will shift the direction of the reaction to the left.
3. Temperature
Picture the exothermic reaction wherein the heat produced is part of the
product while for an endothermic reaction, heat is one of the reactants. For an
exothermic reaction, increasing the temperature will direct the reaction towards the
left. More reactants will be formed instead of the product. An endothermic reaction
will then favor the production of more reactants if we elevate the temperature.
Adding some substances that are not included in the reaction system will have
no effect on the equilibrium, That is, these cannot affect or change the direction of the
reaction despite their presence. As long as the substance being added does not
react with either one of the reactants or products, there is no effect. A catalyst also
has no effect since both the forward and reverse reactions are altered. It only
hastens the attainment of equilibrium.
What you will do
Activity 2.1
From the given reaction 4NH3(g) +5O2(g) 4NO(g) + 6H2O(g) ∆H = 950 KJ. Write True if
statement is correct, otherwise write False.
_______________1. The reaction is exothermic.
_______________2. Heating will cause forward reaction to occur.
_______________3. Pressure has no effect.
_______________4. The reaction will go forward if volume is increased.
_______________5. Adding ammonia will cause forward reaction to occur.
Key to answers on page 15.
→
←
11. - 11 -
What you will do
Self-Test 2.1
Try to check how much you have learned in this lesson by answering the following
questions.
I. Write the equilibrium expression for the following reactions
1. Ni(s) + 4CO(g) ↔ Ni(CO)4(g)
2. H2O(l) ↔ H2O(g)
3. NiO(s) + CO(g) ↔ CO2(g) + Ni(s)
4. H2(g) + I2(g) ↔ 2HI(g)
5. 3H2(g) + N2(g) ↔ 2NH3(g)
II. Consider the exothermic reaction
2SO2(g) + O2(g) ↔ 2SO3(g)
Write → if the reaction will go forward, ← for reverse and ↔ for no change in the direction of
the reaction.
_______________ 1. Adding oxygen
_______________ 2. Removing sulfur dioxide
_______________ 3. Removing sulfur trioxide
_______________ 4. Adding helium gas
_______________ 5. Adding catalyst
Lesson 3. Applications of Chemical Equilibrium
In this lesson, we will study some of the wonderful applications of chemical
equilibrium. The principles of chemical equilibrium are evident from the production of
industrial chemicals, the acid-balance in lakes and streams, to the maintenance of our blood
pH.
Haber Process: Ammonia synthesis
We have encountered the synthesis of ammonia from previous lessons. This time,
we will take a closer look at this reaction. The complete equation is written as
3H2(g) + N2(g) ↔ 2NH3(g) ∆H = -92 kJ/mol
Key to answers on page 15.
12. - 12 -
To produce ammonia economically, we have to run the reaction in such a way that
more ammonia can be obtained in a short period of time. To accomplish this, a catalyst is
used to reach equilibrium faster and temperature is elevated to increase the rate of reaction.
However, since the reaction is exothermic, elevating the temperature too much will
go in the reverse direction. To balance the need to accelerate the reaction and lessen the
formation of reactants, very high pressure is employed - about 300atm, and the temperature
is slightly increased to about 500o
C. The catalyst used is usually iron oxide. Ammonia is
collected periodically and the unreacted gases are recycled to the reactor.
Acid-Balance in Lakes
Unpolluted rainwater has a pH of about 5.6. This is due to the carbon dioxide, CO2
present in air. The reactions are given below.
CO2 g) + H2O(g) ↔ H2CO3(aq)
H2CO3(aq) ↔ H+
(aq) + HCO3
-
(aq)
The presence of dissolved CO2 makes our rain slightly acidic. Does this mean that
the acid rain causing environmental problems is due to carbon dioxide? The answer is no.
Acid rain is caused by sulfur dioxide, SO2, produced from the combustion of coal.
The use of coal as fuel has posted some problems due to the production of sulfur
dioxide. Sulfur content of coal ranges from 3% to 5%. Combustion of coal and the sulfur
contained therein is given below
Combustion of coal: CxHy + O2 → XCO2 + YH2O
where x represents the number of carbon atoms
y represents the number of hydrogen atoms
Combustion of sulfur: S + O2 ↔ H+
(aq) + SO2
Similarly for SO2,
SO2(g) + H2O(g) ↔ H2SO3(aq)
H2SO3(aq) ↔ H+
(aq) + HSO3
-
(aq)
H2SO3 is a stronger acid than H2CO3. About 0.12 ppmv (parts per million by volume)
of SO2 present in air will produce a pH of 4.30 in water whereas 350 ppmv of CO2 will have
a pH of 5.6.
In lakes surrounded by rocks, acid rain is counteracted. The acid-balance is provided
by the carbonates present in rocks. Limestone and rocks contain calcium carbonate,
CaCO3. We can represent the reaction as
CaCO3(s) + 2H+
(aq) ↔ Ca+
(aq) + CO2(g) + H2O(l)
13. - 13 -
Maintenance of Blood pH
The pH of blood is between 7.35 and 7.45. A value beyond this range indicates
illness and death may occur. Blood has many functions. One of its vital roles is to supply
oxygen gas to vital organs and tissues and transport carbon dioxide from tissues and
organs back to the lungs. Nutrients are likewise delivered by the blood and waste products
are carried out in return.
If the pH of blood is below 7.35, the condition is called ACIDOSIS. If the pH of the
blood is higher than 7.45, the condition is called ALKALOSIS. The protection of lake from
acid rain is very much similar to what is happening in the blood. The part of the complex
reaction is:
CO2(g) + H2O(g) ↔ H2CO3(aq) reaction 1
H2CO3(aq) ↔ H+
(aq) + HCO3
-
(aq) reaction 2
Little H2CO3 is formed so we can write the reaction simply as
CO2 (g) + H2O (g) ↔ H+
(aq) + HCO3
-
(aq) reaction 3
Carbon dioxide enhances the release of oxygen gas from the blood and the HCO3
-
produced is carried to the lungs. In the lungs, the reverse of reaction 2 occurs and it is
followed by the reverse of reaction 1. Carbon dioxide is then exhaled out of the lungs.
Take a look at reaction 3. If carbon dioxide cannot escape from the blood, higher
concentration of CO2 shifts the reaction towards the right, therefore more H+ is produced
making the blood acidic. Pneumonia is one sickness that causes acidosis. Breathing is
impaired, which leads to build up of CO2.
What you will do
Activity 3.1
Choose the correct answer.
_______________1. (CaCO3, SO2) counteracts acids in lakes.
_______________2. If the pH of blood is 7.45, the condition is called (acidosis, alkalosis).
_______________3. Blood supplies (O2, CO2) to vital organs and tissues.
_______________4. (H2SO3, H2CO3) is a stronger acid.
_______________5. Pneumonia causes (acidosis, alkalosis).
Key to answers on page 15.
14. - 14 -
What you will do
Self-Test 3.1
The following statements are false. Change the underlined word to make it true.
_______________1. In combustion reactions, water is the reactant.
_______________2. Ammonia synthesis is called Ostuald Process.
_______________3. Copper oxide is used as catalyst in ammonia synthesis.
_______________4. Carbon dioxide makes the raid acidic.
_______________5. High concentration of O2 causes acidosis.
Let’s Summarize
1. Exothermic reaction is the type of reaction wherein heat is given off.
2. Endothermic reaction is the type of reaction wherein heat is absorbed.
3. Law of mass action states that the rate of reaction is directly proportional to the
concentration of the reacting system.
4. Catalysts are substances that alter the rate of reaction.
5. Positive catalysts increase the rate of the reaction.
6. Inhibitor or negative catalysts decrease the rate of the reaction.
7. Enzymes are biological catalysts inside our body.
8. Chemical equilibrium is a state achieved when the rate of the forward and
reverse reaction are equal.
9. Le Chatelier states that when a system at equilibrium has been disturbed or
stress has been applied, the system will respond in such a way to relieve the
disturbance or the stress.
10.Equilibrium constant, Kc, is the characteristic property of the reacting system. It
is written as the ratio of equilibrium concentrations of products and reactants
raised to its respective stoichiometric coefficients.
11.Acidosis is a condition wherein the pH of blood is below 7.35.
12.Alkalosis is a condition wherein the pH of blood is above 7.45.
Key to answers on page 15.
15. - 15 -
Posttest
I. Write TRUE if the statement is correct, otherwise write FALSE.
_______________1. Catalysts are used up during chemical reaction.
_______________2. Catalysts have an effect on the direction of the reaction when
equilibrium is reached.
_______________3. Acidosis is due to high concentration of CO2 in the blood.
_______________4. Catalyst increases the rate of chemical reaction.
_______________5. Burning is an exothermic reaction.
II. For the reaction 3H2(g) + N2(g) ↔ 2NH3(g) ∆H = -92 kJ/mol
Cite five (5) ways on how you will increase the formation of ammonia
1.
2.
3.
4.
5.
III. Write the equilibrium expression for the following reactions
_______________1. 2N2O(g) + 3O2(g) ↔ 2N2O4(g)
_______________2. CO2(g) ↔ CO2(s)
_______________3. N2(g) + O2(g) ↔ 2NO(g)
_______________4. 2Cr3+
(aq) + Fe(s) ↔ 2Cr2+
(aq) + Fe2+
(aq)
_______________5. 2NaHCO3(s) ↔ Na2CO3(s) + CO2(g) + H2O(g)
Key to Answers
Pretest
I. TRUE or FALSE II. FORWARD, REVERSE or NO CHANGE
1. TRUE 1. FORWARD 6. NO CHANGE
2. TRUE 2. FORWARD 7. FORWARD
3. TRUE 3. REVERSE 8. NO CHANGE
4. TRUE 4. FORWARD 9. NO CHANGE
5. TRUE 5. FORWARD 10. NO CHANGE
Key to answers on page 16.
16. - 16 -
Lesson 1
Self-Test 1.1
I. II.
1. Endothermic 1. Nature of reactants
2. Exothermic 2. Temperature
3. Endothermic 3. Catalyst
4. Endothermic 4. Catalyst
5. Exothermic 5. Size of reactants
Lesson 2
Activity 2.1
1. True
2. False
3. False
4. True
5. True
Self-Test 2.1
I. Write the equilibrium expression II. Forward (→), reverse (←) or no change (↔)
][CO
][Ni(CO)
Kc1.
2
4
=
O][HKc2. 2=
[CO]
][CO
Kc3. 2
=
]][I[H
[HI]
Kc4.
22
2
=
][N][H
][NH
Kc5.
2
3
2
2
3
=
1. →
2. ←
3. →
4. ↔
5. ↔
Lesson 3
Activity 3.1 Self-Test 3.1
1. CaCO3 1. Oxygen
2. Alkalosis 2. Haber
3. O2 3. Iron oxide
4. H2SO3 4. SO2
5. Acidosis 5. CO2
17. - 17 -
Posttest
I. TRUE or FALSE III. Writing equilibrium expression
1. FALSE
2. FALSE
3. TRUE
4. TRUE
5. TRUE
II. Five (5) ways to increase formation of NH3
1. Add H2
2. Add N2
3. Remove NH3
4. Increase pressure/decrease volume
5. Decrease temperature
O][H][COKc5.
][Cr
][Fe][Cr
Kc4.
[CO]
[NO]
Kc3.
][CO
1
Kc2.
][OO][N
]O[N
Kc1.
22
23
222
2
2
3
2
2
2
2
42
=
=
=
=
=
+
++
References
Petrucci, R. (1982). General chemistry: Principles and applications. (3rd
ed.) USA:
McMillan Publishing Co.
Bunce, N. (1993). Introduction to environmental chemistry. Canada: Wuerz Publishing Ltd.
Bettleheim, F.A., Brown, W.H. & March, J. (2004). Introduction to organic and
biochemistry. (5th
ed.) USA: Brooks/Cole Publishing Co.
Denniston, K.J., Topping, J.J. & Caret, R.L. (2004). General, organic and biochemistry:
Principles and applications. (4th
ed.) USA: McGrawHill Publishing Co.
Manahan, S.E. (1991). Environmental chemistry. (5th
ed.) USA: Lewis Publisher.