The document provides instructions for drawing 13 isometric views of differently shaped blocks. For each block, three orthographic views are shown in figures 1 through 13 and directions are given to draw a full size isometric view of the block in the direction of the arrows shown, with a grid size of 10 mm x 10 mm and without showing hidden details.

2. CHAPTER 4 : ISOMETRIC DRAWING
1.
Three views of shaped block are shown in Figure 1. Draw a full size
isometric view of the block in the direction of arrows shown. The size
of grid is 10 mm x 10 mm. All hidden details need not be shown.
FIGURE 1
LOCAL PUBLICATIONS (001427383-A)

3. CHAPTER 4 : ISOMETRIC DRAWING
2.
Three views of shaped block are shown in Figure 2. Draw a full size
isometric view of the block in the direction of arrows shown. The size
of grid is 10 mm x 10 mm. All hidden details need not be shown.
FIGURE 2
LOCAL PUBLICATIONS (001427383-A)

4. CHAPTER 4 : ISOMETRIC DRAWING
2.
Three views of shaped block are shown in Figure 3. Draw a full size
isometric view of the block in the direction of arrows shown. The size
of grid is 10 mm x 10 mm. All hidden details need not be shown.
FIGURE 3
LOCAL PUBLICATIONS (001427383-A)

5. CHAPTER 4 : ISOMETRIC DRAWING
4.
Three views of shaped block are shown in Figure 4. Draw a full size
isometric view of the block in the direction of arrows shown. The size
of grid is 10 mm x 10 mm. All hidden details need not be shown.
FIGURE 4
LOCAL PUBLICATIONS (001427383-A)

6. CHAPTER 4 : ISOMETRIC DRAWING
5.
Two views of shaped block are shown in Figure 5. Draw a full size
isometric view of the block in the direction of arrows shown. The size
of grid is 10 mm x 10 mm. All hidden details need not be shown.
FIGURE 5
LOCAL PUBLICATIONS (001427383-A)

7. CHAPTER 4 : ISOMETRIC DRAWING
6.
Three views of shaped block are shown in Figure 6. Draw a full size
isometric view of the block in the direction of arrows shown. The size
of grid is 10 mm x 10 mm. All hidden details need not be shown.
FIGURE 6
LOCAL PUBLICATIONS (001427383-A)

8. CHAPTER 4 : ISOMETRIC DRAWING
7.
Three views of shaped block are shown in Figure 4. Draw a full size
isometric view of the block in the direction of arrows shown. The size
of grid is 10 mm x 10 mm. All hidden details need not be shown.
FIGURE 7
LOCAL PUBLICATIONS (001427383-A)

9. CHAPTER 4 : ISOMETRIC DRAWING
8.
Three views of shaped block are shown in Figure 8. Draw a full size
isometric view of the block in the direction of arrows shown. The size
of grid is 10 mm x 10 mm. All hidden details need not be shown.
FIGURE 8
LOCAL PUBLICATIONS (001427383-A)

10. CHAPTER 4 : ISOMETRIC DRAWING
9.
Three views of shaped block are shown in Figure 9. Draw a full size
isometric view of the block in the direction of arrows shown. The size
of grid is 10 mm x 10 mm. All hidden details need not be shown.
FIGURE 9
LOCAL PUBLICATIONS (001427383-A)

11. CHAPTER 4 : ISOMETRIC DRAWING
10. Three views of shaped block are shown in Figure 10. Draw a full size
isometric view of the block in the direction of arrows shown. The size
of grid is 10 mm x 10 mm. All hidden details need not be shown.
FIGURE 10
LOCAL PUBLICATIONS (001427383-A)

12. CHAPTER 4 : ISOMETRIC DRAWING
11. Three views of shaped block are shown in Figure 11. Draw a full size
isometric view of the block in the direction of arrows shown. The size
of grid is 10 mm x 10 mm. All hidden details need not be shown.
FIGURE 11
LOCAL PUBLICATIONS (001427383-A)

13. CHAPTER 4 : ISOMETRIC DRAWING
12. Three views of shaped block are shown in Figure 12. Draw a full size
isometric view of the block in the direction of arrows shown. The size
of grid is 10 mm x 10 mm. All hidden details need not be shown.
FIGURE 12
LOCAL PUBLICATIONS (001427383-A)

14. CHAPTER 4 : ISOMETRIC DRAWING
13. Three views of shaped block are shown in Figure 13. Draw a full size
isometric view of the block in the direction of arrows shown. The size
of grid is 10 mm x 10 mm. All hidden details need not be shown.
FIGURE 13
LOCAL PUBLICATIONS (001427383-A)