1) The document outlines procedures for changing trolley wheels and grinding rails on cranes to address issues like vibration, noise, and bearing damage.
2) Key steps include planning the project, using tools like jacks and thread rods to remove and install wheels, and using special grinding machines to reshape worn rails.
3) General considerations include securing the work area, properly adjusting new wheels, and adjusting rail levels before and after grinding. The goal is to eliminate operational issues and ensure healthy and safe working conditions.
MEKA J Series mobile jaw crushers provide true mobility with compact dimensions. MEKATRACK MTJ1165 is easy to transport between sites, provides fast set-up time and low operational costs with an excellent crushing capacity.
MEKA J Series mobile jaw crushers provide true mobility with compact dimensions. MEKATRACK MTJ1165 is easy to transport between sites, provides fast set-up time and low operational costs with an excellent crushing capacity.
Started to create milestones, we ameenji rubber private limited marked our presence in the year 1997 and operates in the manufacturing/servicing of rubber and rubber products since 55 years.Our quality services/products have always won us many appreciations from our clients. Our spontaneous performance and confident approach in offering the excellent range of elastomeric bridge bearings, bridge expansion joints, rubber sheets and made to order rubber moulded parts and extruded profiles that has made us to deepen our roots in the market.We ameenji rubber private limited breathe with the aim to satisfy our clients with our smart products/services.We are a unit of highly experienced professionals who all contribute best of their potentials to offer high efficiency.
The features of HD German jaw crusher is perfectly combining the crushing chamber and improving design of operation parameter, which not only can improve the production capacity and products quality
Welcome to International Journal of Engineering Research and Development (IJERD)IJERD Editor
journal publishing, how to publish research paper, Call For research paper, international journal, publishing a paper, IJERD, journal of science and technology, how to get a research paper published, publishing a paper, publishing of journal, publishing of research paper, reserach and review articles, IJERD Journal, How to publish your research paper, publish research paper, open access engineering journal, Engineering journal, Mathemetics journal, Physics journal, Chemistry journal, Computer Engineering, Computer Science journal, how to submit your paper, peer reviw journal, indexed journal, reserach and review articles, engineering journal, www.ijerd.com, research journals,
yahoo journals, bing journals, International Journal of Engineering Research and Development, google journals, hard copy of journal
JPMA, Mill Coupling used in Suigar Industry.
Mill coupling is installed for torque transmission from the final speed reduction gear/ Planetary Gear to the mill top roller.
In spite of the numerous shortcomings of the tail bar system, it was universally used simply because there was no better alternative before the introduction of Rope coupling / JPMA Mill Coupling.
JPMA Mill coupling completely replaces the conventional tail bar and square coupling assembly.
Bucket elevators transport huge loads in critical industries ever day - selecting the right chain and attachments is crucial to keep your operation up and running as efficiently as possible.
Jane Lien, Amalia Goutaki, Payal Patel
After speaking with local businesses, this team identified an underlying network of “business-neighbors,” where local businesses build relationships through promoting and collaborating one another. The Sweet Trolley is one way MSK can become an engaged neighbor and a part of this network. Through carrying items from local businesses, MSK can provide a virtual and mobile gift shop and recreation service to patients.
Started to create milestones, we ameenji rubber private limited marked our presence in the year 1997 and operates in the manufacturing/servicing of rubber and rubber products since 55 years.Our quality services/products have always won us many appreciations from our clients. Our spontaneous performance and confident approach in offering the excellent range of elastomeric bridge bearings, bridge expansion joints, rubber sheets and made to order rubber moulded parts and extruded profiles that has made us to deepen our roots in the market.We ameenji rubber private limited breathe with the aim to satisfy our clients with our smart products/services.We are a unit of highly experienced professionals who all contribute best of their potentials to offer high efficiency.
The features of HD German jaw crusher is perfectly combining the crushing chamber and improving design of operation parameter, which not only can improve the production capacity and products quality
Welcome to International Journal of Engineering Research and Development (IJERD)IJERD Editor
journal publishing, how to publish research paper, Call For research paper, international journal, publishing a paper, IJERD, journal of science and technology, how to get a research paper published, publishing a paper, publishing of journal, publishing of research paper, reserach and review articles, IJERD Journal, How to publish your research paper, publish research paper, open access engineering journal, Engineering journal, Mathemetics journal, Physics journal, Chemistry journal, Computer Engineering, Computer Science journal, how to submit your paper, peer reviw journal, indexed journal, reserach and review articles, engineering journal, www.ijerd.com, research journals,
yahoo journals, bing journals, International Journal of Engineering Research and Development, google journals, hard copy of journal
JPMA, Mill Coupling used in Suigar Industry.
Mill coupling is installed for torque transmission from the final speed reduction gear/ Planetary Gear to the mill top roller.
In spite of the numerous shortcomings of the tail bar system, it was universally used simply because there was no better alternative before the introduction of Rope coupling / JPMA Mill Coupling.
JPMA Mill coupling completely replaces the conventional tail bar and square coupling assembly.
Bucket elevators transport huge loads in critical industries ever day - selecting the right chain and attachments is crucial to keep your operation up and running as efficiently as possible.
Jane Lien, Amalia Goutaki, Payal Patel
After speaking with local businesses, this team identified an underlying network of “business-neighbors,” where local businesses build relationships through promoting and collaborating one another. The Sweet Trolley is one way MSK can become an engaged neighbor and a part of this network. Through carrying items from local businesses, MSK can provide a virtual and mobile gift shop and recreation service to patients.
ZGM type of roller grinding coal mill overhauling.
Overhauling is done to increase the efficiency of coal mill. Overhauling all equipments to check and avoid accidents. Overhauling is done to proper alligment.
1. Changing Trolley Wheels & Grinding Rails
“Noell Cranes”
Eng. M. Elnagdy
Junior Mechanical Engineer
Cranes Team
2. Contents:
* -Problem & Solution.
**-Project Planning.
***-Tools.
I-Wheels assembly procedures.
II-Changing wheels procedures.
III-Grinding the rails.
Safety for Life
****-General Considerations. SCCT
3. Goal of the project
1-Eliminate vibration of the operator cabins.
2-Eliminate noise.
3-Healthy working to the operator.
4-No BDN during operation.
4. * Problem
In operation and during loading and discharging containers from and to vessels, and after
many crane working hours, the shape of trolley wheel and trolley rail will change.
During many times of trolley movements, the trolley wheel waer from middle, and the rail
have a crown at the middle and appendages at ends which results to heavy vibration
and big noise.
Rails
original shape
shape after time
Solution
Grinding the rails by a special machines
Rail Material
St70 E360
hardness brinell 205-250
5. Wheels
The shape of the wheels changed and become with groove at middle from contact point with
the rails. Which lead to damaged the bearings.
Changing of wheel shape
Solution
Change trolley wheels
Wheel Material
Forging 1.6582+QT
Damaged bearing
6. ** Planning of the projects
For each crane it take from 10 to 11 days,
- one day preparation.
- four days changing trolley wheels and adjustment.
- five or six days grinding rails
7. *** Tools
Tool Qty Application
Hydraulic jack 100 t 2 Lifting trolley
Hydraulic jack 50t 2 Adjusting bearing housing center, remove gearbox support pin,
and remove gear box from wheel shaft
Hydraulic pump 2 Operating jacks
Thread rod M24, length 50cm 2 Lifting up and down wheels
Thread rod M24, length 20cm 4 Insert gearbox into wheel shaft.
Nuts M24 6 For thread rods M24 (for install gearbox)
Thread rod M16, length 1m 4 Extracting gearbox from wheel shaft
Chain block 3 t 1 Between service crane and gearbox
Small wire rope 1m length 2 Lift gearboxes and wheels
shackles 2 Lifting gearboxes and wheels
Lashing rope, 3m long 2 Lifting guide rollers
Various lining plates 20 To put under the trolley
100x150mm, with various
thickness (2,5,8,10,20,30mm)
Metal plates, thickness 40mm, 4 To put between jack and trolley
50x100mm
Grease type TEXCLAD2 For gearbox shaft and shrink disc
Grease type EP2 For bearings
Circlip lock pliers 2 For shrink disc
8. I- Wheel Assembly Procedures
A-Gearbox Side Assembly
1- Cleaning the shaft surface
2- Insert first cover (No. 6 in drawing) cover 360/172x25
-See the seal direction (No. 11 in drawing)
-Seal No. 170x200x15
9. 3-Heating the bearing (No. 10 in drawing),
-bearing type: spherical roller bearing
-bearing No. 23230
-using SKF induction heater (type TIH 100m).
-heating temperature 160 C.
4-Insert the bearing in its position.
-insert bearing must be fast.
-must wear heater gloves.
10. 5-Insert bearing housing (No. 4 in drawing).
-housing must be cleaned by soft grinding machine.
6-Insert distance bush 170/136x57 (No. 3 in drawing)
12. B- Another Side
1-Insert first cover (No. 7 in drawing)
-cover 360/172x25.
-see seal direction
2-Heating the bearing
13. 3-Insert the bearing.
-wearing a special gloves
4-Insert washer plate (No. 9 in drawing).
-PL 15x180x180
14. 5-Insert bearing housing.
-housing must be cleaned by soft grinding machine.
6-Insert second (No, 8 in drawing).
-cover 360x22
15. II- Changing Wheels Procedures
1-Bring the Trolley under the M- house, so that the WS- wheels standing under the
covers and we can using the M- house crane.
2-Under the trolley, between the rail and the trolley traveling girder one hydraulic
jack 100t under the jacking point- only make strong not lifting.
3-Check everywhere, also underneath the girder is free.
16. 4-Loose all screw of the guide roller support, and remove them.
5-Dismantle the cardan shaft on the gear box and the torque support- the gearbox is
secured on the hook of the M-house crane.
Torque support jack 50t Cardan shaft
17. 6-Dissolve the shrink disc.
*shrink disc components.
7-Pull off the gearbox.
Jack 50t
thread rod M16
18. 8-Dismantle on both sides of the bearing plates- in and outside.
9-Lift up the trolley, so high that we can rolling out the wheel. Before secure the
wheel by sling at the hook of the M-house crane.
19. 10-Bring the dismantled wheel on the ground and lift a new one- mount it- put the
trolley again on the rail.
11-Amount again bearing plates, torque support, cardan shaft, gearbox, and shrink
disc.
*before amount
shrink disc, shaft
must be cleaned
and put black
grease as see
*amount the gearbox using thread rod M24, length 20cm, and nut 24
20. III- Grinding the rail
-Grinding the rail is carried out by two special grinding machine mounted and
driven by trolley.
-The electrical supply from machinery house.
-The trolley moves by maintenance speed (from maintenance panel on the
trolley).
-Thickness of erased layer of the
rail by grinding Max. 2mm
21. -Grinding the rails take from 5 to 6 days, depend on rail status.
Grinding the rails from side.
Grinding the rails from top.
22. -Grinding the rails at beginning (grinding part is thin).
-Grinding the rail at finish (grinding part from 87:90 % of rail face)
23. -Grinding the rail at hinge point at start of grinding.
-Grinding the rail at hinge point at finishing of grinding
-Difference between start of grinding and finishing
24. General consideration
*Before Start trolley wheels changing:
1-Secure the area under the crane by safety cones.
2-Check maintenance crane of the crane.
3-Check bolts of machinery house for maintenance crane.
*Adjustment of wheel
1-Lift the trolley by hydraulic jack (100t).
2-Put the hydraulic jack (50t) under point (2) to rotate the housing to be the
point (1) at same level with point (3).
3-After finishing the adjustment of four wheels, move the trolley forward
and backward, and see the contact of the wheels with the rail
4-If there is any deviation of the wheel, lift the trolley up and move the point
(2) up little pit and repeat again until the wheel adjusted.
*When assembly the gear box, you must not put any grease on the shaft (at shrink disc area).
(3) (1) (2)
25. *Before Grinding the rail:
-Adjustment of rail level at hinge point by butting chimes between boom
and girder (thickness between 0.5 to 1 mm).
girder boom
*After grinding the rail:
-Cleaning the rail ,girder, and boom.
& operation test.