Presentazione di Silvia Catalino - ITACA - al convegno Sostenibilità ambientale nelle costruzioni - strumenti operativi per la valutazione. La Prassi di Riferimento UNI/PdR 13:2015, Rho 18.3.2015 BuildSMART MadeEXPO
Energia da Biogas prodotto con Rifiuti Solidi Urbaniadriano cirasole
Lack of management in waste collection in the Metropolitan areas of Matera reflects historical structural divide, which produces costs on the City Hall e on the final consumers through higher taxes, beyond further CO2 emissions to carry the waste to other regions to be recycled.
European Waste Framework Directive's 50 % should be pursued in 2020 for Municipal waste.
We should pass this target to become a sustainable community, reglobalizating the energy from bottom through Distributed Generated Association.
Distributed Generation is the strategic placement of small power generating units near customer loads. Distributed generation technologies include such resources as:
Industrial gas turbines
Reciprocating engines in industrial and commercial heat and power applications
Storage systems
Wind turbines
Photovoltaic
Biomass
Hydrogen Fuel cells
A DGA is a community of customers who become producers of their own energy, are less dependent from interests of power lobbies, interconnected in a global net where producers community ex-change energy to each other horizontally.
A Grid for Distributed Generation Energy produced from Municipal Waste would allow to my City Hall to comply with European standards and efficiency in Municipal Waste management, producing cheap energy for the inhabitants.
Energia da Biogas prodotto con Rifiuti Solidi Urbaniadriano cirasole
Lack of management in waste collection in the Metropolitan areas of Matera reflects historical structural divide, which produces costs on the City Hall e on the final consumers through higher taxes, beyond further CO2 emissions to carry the waste to other regions to be recycled.
European Waste Framework Directive's 50 % should be pursued in 2020 for Municipal waste.
We should pass this target to become a sustainable community, reglobalizating the energy from bottom through Distributed Generated Association.
Distributed Generation is the strategic placement of small power generating units near customer loads. Distributed generation technologies include such resources as:
Industrial gas turbines
Reciprocating engines in industrial and commercial heat and power applications
Storage systems
Wind turbines
Photovoltaic
Biomass
Hydrogen Fuel cells
A DGA is a community of customers who become producers of their own energy, are less dependent from interests of power lobbies, interconnected in a global net where producers community ex-change energy to each other horizontally.
A Grid for Distributed Generation Energy produced from Municipal Waste would allow to my City Hall to comply with European standards and efficiency in Municipal Waste management, producing cheap energy for the inhabitants.
Energia da Biogas prodotto con Rifiuti Solidi Urbaniadriano cirasole
Lack of management in waste collection in the Metropolitan areas of Matera reflects historical structural divide, which produces costs on the City Hall e on the final consumers through higher taxes, beyond further CO2 emissions to carry the waste to other regions to be recycled.
European Waste Framework Directive's 50 % should be pursued in 2020 for Municipal waste.
We should pass this target to become a sustainable community, reglobalizating the energy from bottom through Distributed Generated Association.
Distributed Generation is the strategic placement of small power generating units near customer loads. Distributed generation technologies include such resources as:
Industrial gas turbines
Reciprocating engines in industrial and commercial heat and power applications
Storage systems
Wind turbines
Photovoltaic
Biomass
Hydrogen Fuel cells
A DGA is a community of customers who become producers of their own energy, are less dependent from interests of power lobbies, interconnected in a global net where producers community ex-change energy to each other horizontally.
A Grid for Distributed Generation Energy produced from Municipal Waste would allow to my City Hall to comply with European standards and efficiency in Municipal Waste management, producing cheap energy for the inhabitants.
Energia da Biogas prodotto con Rifiuti Solidi Urbaniadriano cirasole
Lack of management in waste collection in the Metropolitan areas of Matera reflects historical structural divide, which produces costs on the City Hall e on the final consumers through higher taxes, beyond further CO2 emissions to carry the waste to other regions to be recycled.
European Waste Framework Directive's 50 % should be pursued in 2020 for Municipal waste.
We should pass this target to become a sustainable community, reglobalizating the energy from bottom through Distributed Generated Association.
Distributed Generation is the strategic placement of small power generating units near customer loads. Distributed generation technologies include such resources as:
Industrial gas turbines
Reciprocating engines in industrial and commercial heat and power applications
Storage systems
Wind turbines
Photovoltaic
Biomass
Hydrogen Fuel cells
A DGA is a community of customers who become producers of their own energy, are less dependent from interests of power lobbies, interconnected in a global net where producers community ex-change energy to each other horizontally.
A Grid for Distributed Generation Energy produced from Municipal Waste would allow to my City Hall to comply with European standards and efficiency in Municipal Waste management, producing cheap energy for the inhabitants.
Energia da Biogas prodotto con Rifiuti Solidi Urbaniadriano cirasole
Lack of management in waste collection in the Metropolitan areas of Matera reflects historical structural divide, which produces costs on the City Hall e on the final consumers through higher taxes, beyond further CO2 emissions to carry the waste to other regions to be recycled.
European Waste Framework Directive's 50 % should be pursued in 2020 for Municipal waste.
We should pass this target to become a sustainable community, reglobalizating the energy from bottom through Distributed Generated Association.
Distributed Generation is the strategic placement of small power generating units near customer loads. Distributed generation technologies include such resources as:
Industrial gas turbines
Reciprocating engines in industrial and commercial heat and power applications
Storage systems
Wind turbines
Photovoltaic
Biomass
Hydrogen Fuel cells
A DGA is a community of customers who become producers of their own energy, are less dependent from interests of power lobbies, interconnected in a global net where producers community ex-change energy to each other horizontally.
A Grid for Distributed Generation Energy produced from Municipal Waste would allow to my City Hall to comply with European standards and efficiency in Municipal Waste management, producing cheap energy for the inhabitants.
Energia da Biogas prodotto con Rifiuti Solidi Urbaniadriano cirasole
Lack of management in waste collection in the Metropolitan areas of Matera reflects historical structural divide, which produces costs on the City Hall e on the final consumers through higher taxes, beyond further CO2 emissions to carry the waste to other regions to be recycled.
European Waste Framework Directive's 50 % should be pursued in 2020 for Municipal waste.
We should pass this target to become a sustainable community, reglobalizating the energy from bottom through Distributed Generated Association.
Distributed Generation is the strategic placement of small power generating units near customer loads. Distributed generation technologies include such resources as:
Industrial gas turbines
Reciprocating engines in industrial and commercial heat and power applications
Storage systems
Wind turbines
Photovoltaic
Biomass
Hydrogen Fuel cells
A DGA is a community of customers who become producers of their own energy, are less dependent from interests of power lobbies, interconnected in a global net where producers community ex-change energy to each other horizontally.
A Grid for Distributed Generation Energy produced from Municipal Waste would allow to my City Hall to comply with European standards and efficiency in Municipal Waste management, producing cheap energy for the inhabitants.
Pandora: Climate change ed edifici sostenibilieAmbiente
Città Sostenibile 2011 - Conferenza stampa e Workshop: "Pandora: un organismo vivente a Marghera - progetto e contenuti". Intervento di Gabriella Chiellino, AD di eAmbiente Srl
Finestre, sostenibilità e riqualificazione, Gennaro Durante - De Carlo casainfoprogetto
Gamma soluzioni serramenti De Carlo (video); Sviluppo Sostenibile e Quadro Normativo; Il catalogo De Carlo e i dati tecnici delle finestre; Soluzioni e assistenza ai progettisti "De Carlo Soft 3.0” (il configuratore esperto di nuova generazione); Sostenibilità e riqualificazione, il legno.
Finestre, sostenibilità e riqualificazione - De Carlo Casa - Gennaro Durante...infoprogetto
Gamma soluzioni serramenti De Carlo (video); Sviluppo Sostenibile e Quadro Normativo, Soluzioni e assistenza ai progettisti "De Carlo Soft 3.0” (il configuratore esperto di nuova generazione), Certificazioni Volontarie e Caratteristiche prestazionali dell’involucro edilizio, Caratteristiche prestazionali obbligatorie dei serramenti. Perché scegliere le finestre in legno e legno/alluminio per una edilizia ecosostenibile.
Gennaro Durante e Bruno Borsarelli, De Carlo Casa Srl infoprogetto
Gamma soluzioni serramenti De Carlo (video); Sviluppo Sostenibile e Quadro Normativo, Soluzioni e assistenza ai progettisti "De Carlo Soft 3.0” (il configuratore esperto di nuova generazione), Certificazioni Volontarie e Caratteristiche prestazionali dell’involucro edilizio, Caratteristiche prestazionali obbligatorie dei serramenti. Perché scegliere le finestre in legno e legno/alluminio per una edilizia ecosostenibile.
Gennaro Durante De Carlo Casa Finestre, sostenibilità e riqualificazioneinfoprogetto
E' stata presentata una vasta gamma di soluzioni di serramenti De Carlo Casa e le caratteristiche prestazionali dell’involucro edilizio.
"Perché scegliere le finestre in legno e legno/alluminio per una edilizia ecosostenibile."
Sostenibilità ed economia circolare: esempi applicativi di simbiosi industrialeServizi a rete
Servizi a Rete TOUR 2022 | Presentazione di Massimo Spizzirri - Responsabile Depurazione e Fognature Acea Ato 2
19-20 ottobre 2022, Centro Congressi La Fornace di Acea Ato 2 a Roma
Arch Paola Marrone_tecnologie e strategie progettualiSOLAVA
Retrofit energetico
Pianificazione strategie e interventi: EPi climatizzazione invernale
Materiali e soluzioni per involucro orizzontale
Pianificazione strategie e interventi: EPe, invol climatizzazione estiva
Controllo termico
Presentazione a supporto dell'intervento di Andrea Galli, Esperto UNI/CT 016/GL 79 “Analisi del valore” al webinar LA UNI 11915:2023 SUL VALUE MANAGER: CONTESTO E PROSPETTIVE " del 16 febbraio 2024
Presentazione a supporto dell'intervento di Giampiero Bambagioni, Coordinatore UNI/CT 010/GL 02 “Stima del valore di mercato degli immobili” al webinar "LA UNI 11915:2023 SUL VALUE MANAGER: CONTESTO E PROSPETTIVE" del 16 febbraio 2024
More Related Content
Similar to UNI/PdR 13.1.2015 La struttura dei criteri del Protocollo Itaca
Pandora: Climate change ed edifici sostenibilieAmbiente
Città Sostenibile 2011 - Conferenza stampa e Workshop: "Pandora: un organismo vivente a Marghera - progetto e contenuti". Intervento di Gabriella Chiellino, AD di eAmbiente Srl
Finestre, sostenibilità e riqualificazione, Gennaro Durante - De Carlo casainfoprogetto
Gamma soluzioni serramenti De Carlo (video); Sviluppo Sostenibile e Quadro Normativo; Il catalogo De Carlo e i dati tecnici delle finestre; Soluzioni e assistenza ai progettisti "De Carlo Soft 3.0” (il configuratore esperto di nuova generazione); Sostenibilità e riqualificazione, il legno.
Finestre, sostenibilità e riqualificazione - De Carlo Casa - Gennaro Durante...infoprogetto
Gamma soluzioni serramenti De Carlo (video); Sviluppo Sostenibile e Quadro Normativo, Soluzioni e assistenza ai progettisti "De Carlo Soft 3.0” (il configuratore esperto di nuova generazione), Certificazioni Volontarie e Caratteristiche prestazionali dell’involucro edilizio, Caratteristiche prestazionali obbligatorie dei serramenti. Perché scegliere le finestre in legno e legno/alluminio per una edilizia ecosostenibile.
Gennaro Durante e Bruno Borsarelli, De Carlo Casa Srl infoprogetto
Gamma soluzioni serramenti De Carlo (video); Sviluppo Sostenibile e Quadro Normativo, Soluzioni e assistenza ai progettisti "De Carlo Soft 3.0” (il configuratore esperto di nuova generazione), Certificazioni Volontarie e Caratteristiche prestazionali dell’involucro edilizio, Caratteristiche prestazionali obbligatorie dei serramenti. Perché scegliere le finestre in legno e legno/alluminio per una edilizia ecosostenibile.
Gennaro Durante De Carlo Casa Finestre, sostenibilità e riqualificazioneinfoprogetto
E' stata presentata una vasta gamma di soluzioni di serramenti De Carlo Casa e le caratteristiche prestazionali dell’involucro edilizio.
"Perché scegliere le finestre in legno e legno/alluminio per una edilizia ecosostenibile."
Sostenibilità ed economia circolare: esempi applicativi di simbiosi industrialeServizi a rete
Servizi a Rete TOUR 2022 | Presentazione di Massimo Spizzirri - Responsabile Depurazione e Fognature Acea Ato 2
19-20 ottobre 2022, Centro Congressi La Fornace di Acea Ato 2 a Roma
Arch Paola Marrone_tecnologie e strategie progettualiSOLAVA
Retrofit energetico
Pianificazione strategie e interventi: EPi climatizzazione invernale
Materiali e soluzioni per involucro orizzontale
Pianificazione strategie e interventi: EPe, invol climatizzazione estiva
Controllo termico
Presentazione a supporto dell'intervento di Andrea Galli, Esperto UNI/CT 016/GL 79 “Analisi del valore” al webinar LA UNI 11915:2023 SUL VALUE MANAGER: CONTESTO E PROSPETTIVE " del 16 febbraio 2024
Presentazione a supporto dell'intervento di Giampiero Bambagioni, Coordinatore UNI/CT 010/GL 02 “Stima del valore di mercato degli immobili” al webinar "LA UNI 11915:2023 SUL VALUE MANAGER: CONTESTO E PROSPETTIVE" del 16 febbraio 2024
Presentazione a supporto dell'intervento di Oliviero Casale, UNI/CT 016/GL 89 “Gestione dell’innovazione”, UniProfessioni al webinar "LA NUOVA PRASSI DI RIFERIMENTO UNI-ENEL
GESTIONE DELL’INNOVAZIONE SOSTENIBILE - LINEE GUIDA
PER LA GESTIONE DEI PROCESSI DI INNOVAZIONE SOSTENIBILE NELLE IMPRESE ATTRAVERSO L’OPEN INNOVATION" del
9 febbraio 2024
Presentazione a supporto dell'intervento di Oliviero Casale, UNI/CT 016/GL 89 “Gestione dell’innovazione”, UniProfessioni al webinar "LA NUOVA PRASSI DI RIFERIMENTO UNI-ENEL
GESTIONE DELL’INNOVAZIONE SOSTENIBILE - LINEE GUIDA
PER LA GESTIONE DEI PROCESSI DI INNOVAZIONE SOSTENIBILE NELLE IMPRESE ATTRAVERSO L’OPEN INNOVATIONE" del
9 febbraio 2024
Presentazione a supporto dell'intervento di Matteo Gaudenzi, UNI/CT 016/GL 89 “Gestione dell’innovazione” al webinar "LA NUOVA PRASSI DI RIFERIMENTO UNI-ENEL
GESTIONE DELL’INNOVAZIONE SOSTENIBILE - LINEE GUIDA
PER LA GESTIONE DEI PROCESSI DI INNOVAZIONE SOSTENIBILE NELLE IMPRESE ATTRAVERSO L’OPEN INNOVATION" del
9 febbraio 2024
Presentazione a supporto dell'intervento di Intellectual property
Marco Imparato, ENEL al webinar "LA NUOVA PRASSI DI RIFERIMENTO UNI-ENEL
GESTIONE DELL’INNOVAZIONE SOSTENIBILE - LINEE GUIDA
PER LA GESTIONE DEI PROCESSI DI INNOVAZIONE SOSTENIBILE NELLE IMPRESE ATTRAVERSO L’OPEN INNOVATION" del
9 febbraio 2024
Presentazione a supporto dell'intervento di Luca Ciardiello, ENEL al webinar "LA NUOVA PRASSI DI RIFERIMENTO UNI-ENEL
GESTIONE DELL’INNOVAZIONE SOSTENIBILE - LINEE GUIDA
PER LA GESTIONE DEI PROCESSI DI INNOVAZIONE SOSTENIBILE NELLE IMPRESE ATTRAVERSO L’OPEN INNOVATION" del
9 febbraio 2024
Presentazione a supporto dell'intervento di Piergiuseppe Cassone, Coordinatore UNI/CT 016/GL 89 “Gestione dell’innovazione”, Confindustria Bergamo al webinar "LA NUOVA PRASSI DI RIFERIMENTO UNI-ENEL
GESTIONE DELL’INNOVAZIONE SOSTENIBILE - LINEE GUIDA
PER LA GESTIONE DEI PROCESSI DI INNOVAZIONE SOSTENIBILE NELLE IMPRESE ATTRAVERSO L’OPEN INNOVATION" del
9 febbraio 2024
Presentazione a supporto dell'intervento di Angelo Rigillo, ENEL al webinar "LA NUOVA PRASSI DI RIFERIMENTO UNI-ENEL GESTIONE DELL’INNOVAZIONE SOSTENIBILE - LINEE GUIDA
PER LA GESTIONE DEI PROCESSI DI INNOVAZIONE SOSTENIBILE NELLE IMPRESE ATTRAVERSO L’OPEN INNOVATION" del 9 febbraio 2024
Presentazione a supporto dell'intervento di Fabrizio Salmi, Studio Salmi/AIAS al webinar "15 ANNI DAL D.LGS.81/2008 E
L’EVOLUZIONE DELLA FIGURA DEL RSPP:
PROFESSIONISTI DELLA PRIVACY, DEL TRATTAMENTO
E DELLA PROTEZIONE DEI DATI PERSONALI, SICUREZZA DELLE INFORMAZIONI E WHISTLEBLOWING" del 31 gennaio 2024
Presentazione a supporto dell'intervento di Ivan Grumelli, DussmannS al webinar "15 ANNI DAL D.LGS.81/2008 E
L’EVOLUZIONE DELLA FIGURA DEL RSPP: PROFESSIONISTI DELLA PRIVACY, DEL TRATTAMENTO E DELLA PROTEZIONE DEI DATI PERSONALI, SICUREZZA DELLE INFORMAZIONI E WHISTLEBLOWING" del 31 gennaio 2024
Presentazione a supporto dell'intervento di Alessandro Foti, Vice-Presidente AIAS al webinar "15 ANNI DAL D.LGS.81/2008 E
L’EVOLUZIONE DELLA FIGURA DEL RSPP: PROFESSIONISTI DELLA PRIVACY, DEL TRATTAMENTO E DELLA PROTEZIONE DEI DATI PERSONALI, SICUREZZA DELLE INFORMAZIONI E WHISTLEBLOWING" del 31 gennaio 2024
Presentazione a supporto dell'intervento di Fabio Guasconi, Bl4ckswan/AIAS al webinar "15 ANNI DAL D.LGS.81/2008 E
L’EVOLUZIONE DELLA FIGURA DEL RSPP:
PROFESSIONISTI DELLA PRIVACY, DEL TRATTAMENTO
E DELLA PROTEZIONE DEI DATI PERSONALI, SICUREZZA DELLE INFORMAZIONI E WHISTLEBLOWING" del 31 gennaio 2024
Presentazione a supporto dell'intervento di Ugo Di Stefano, Lexellent/ASLA al webinar "15 ANNI DAL D.LGS.81/2008 E L’EVOLUZIONE DELLA FIGURA DEL RSPP:
PROFESSIONISTI DELLA PRIVACY, DEL TRATTAMENTO
E DELLA PROTEZIONE DEI DATI PERSONALI, SICUREZZA DELLE INFORMAZIONI E WHISTLEBLOWING" del 31 gennaio 2024
Presentazione a supporto dell'intervento di Giulia Pierini, LP Avvocati al webinar "LE NORME UNI E ISO A SUPPORTO DEL WHISTLEBLOWING, INTERNAL INVESTIGATION E DECRETO 231" del 11 dicembre 2023
Presentazione a supporto dell'intervento di Cindy Martine Grasso, Esperta UNI/CT 016/GL 09 al webinar "LE NORME UNI E ISO A SUPPORTO DEL WHISTLEBLOWING, INTERNAL INVESTIGATION E DECRETO 231" del 11 dicembre 2023
Presentazione a supporto dell'intervento di Roberto Fiore, Esperto UNI/CT 016/GL 09 al webinar "LE NORME UNI E ISO A SUPPORTO DEL WHISTLEBLOWING, INTERNAL INVESTIGATION E DECRETO 231" del 11 dicembre 2023
Presentazione a supporto dell'intervento di Alessandro Foti, Vice-Presidente AIAS al webinar "LE NORME UNI E ISO A SUPPORTO DEL WHISTLEBLOWING, INTERNAL INVESTIGATION E DECRETO 231" del 11 dicembre 2023
11 dicembre 2023
Presentazione a supporto dell'intervento di Alessandro Foti, Coordinatore UNI/CT 016/GL 09 al webinar "LE NORME UNI E ISO A SUPPORTO DEL WHISTLEBLOWING, INTERNAL INVESTIGATION E DECRETO 231" del 11 dicembre 2023
Presentazione a supporto dell'intervento di Stanislao Ziantoni, Coordinatore UNI/CT 016/GL 10 “Figure professionali afferenti alla gestione per la qualità”, rappresentante ANGQ in UNI, docente UNITRAIN e ANGQ Sistemi al webinar "LA NORMA UNI 11889 E I PERCORSI FORMATIVI PER FIGURE PROFESSIONALI DI TECNICO/A, SPECIALISTA E MANAGER DELLA QUALITÀ" del 9 ottobre 2023
3. EVOLUZIONE DEI SISTEMI DI VALUTAZIONE IN EUROPA
ENERGIA AMBIENTE SOSTENIBILITA’
EUROPEAN DIRECTIVE
2010/31 ENERGY
PERFORMANCE OF
BUILDINGS
ENERGY CERTIFICATION
ITALIAN LEGISLATIVE
DECREE 311/2006
CASA CLIMA
LEED NEIGHBORHOOD
DEVELOPMENT
BREEAM
HQE
DGNB NEW URBAN
DISTRICTS
ITACA PROTOCOL
UNI PdR 13/2015
SB METHOD
URBAN RATING
ITACA PROTOCOL-URBAN
SCALE (UNDER
CONSTRUCTION)
LEED®
DGNB
EPCLA ELCD
4. A.1 Selezione del sito Peso
A.1.5
Riutilizzo del territorio
34%
Favorire l’uso di aree contaminate, dismesse o precedentemente antropizzate.
A.1.6
Accessibilità al trasporto pubblico
23%Siti da cui sono facilmente accessibili le reti di trasporto pubblico, per ridurre l'uso dei veicoli
privati.
A.1.8
Mix funzionale dell'area
Prossimità ai servizi collettivi, distanza media dalle strutture base complementari alla residenza
23%
A.1.10
Adiacenza ad infrastrutture
20%
Distanza media dalle reti gas, acquedotto, fognature, elettrica
A.3 Progettazione dell'area Peso
A.3.3
Aree esterne di uso comune attrezzate
27%
Attrezzatura per la sosta delle persone delle aree di pertinenza dell’edificio
A.3.4
Supporto all’uso di biciclette
Numero posti sosta biciclette
73%
AREA A - RAPPORTO EDIFICIO CON IL SITO
6. AREA A- EMISSIONI E COSTI RISPARMIABILI – CASI STUDIO
PROSSIMITA’ ALLE STRUTTURE DI BASE COMPLEMENTARI
Abitanti km %persone gg
km/pers/
anno
kgCO2 car
kgCO2 bus
(0,069)
kg CO2
Risp.
m2
kGCO2/m2
1. R MACERATA 9 24 1,98 210 9979,2 1097,71 688,565 409,1472 217,5 1,9
2. R GABICCE 8 24 1,76 210 8870,4 975,744 612,058 363,6864 203,2 1,8
2. NC MONTEMARCIANO 23 24 5,06 210 25502,4 2805,26 1759,67 1045,598 580 1,8
5. NC MOGLIANO 13 24 2,86 210 14414,4 1585,58 994,594 590,9904 342 1,7
5 ALTAMURA 8 24 1,76 210 8870,4 975,744 612,058 363,6864 199 1,8
6 BASSANO 11 24 2,42 210 12196,8 1341,65 841,579 500,0688 292,3 1,7
MEDIA 1,8
PROSSIMITA’ ALLE FERMATE DI MEZZI PUBBLICI
7. AREA B. CONSUMO DI RISORSE - AREA C. CARICHI AMBIENTALI
ENERGIA ED EMISSIONI
B.1 Energia primaria non rinnovabile richiesta durante il ciclo di vita Peso
B.1.2
Energia primaria per il riscaldamento
50%
Rapporto tra EpiH immobile e EpiH, limite
B.1.5
Energia primaria per acqua calda sanitaria
50%
Ridurre consumi di Epi ACS
B.3 Energia da fonti rinnovabili Peso
B3.2
Energia rinnovabile per usi termici
Quota energia termica rinnovabile
50%
B.3.3
Energia prodotta nel sito per usi elettrici
50%
Quota energia elettrica rinnovabile
C.1 Emissioni di CO2 equivalente Peso
C.1.2 Emissioni previste in fase operativa 100%
Riduzione emissioni di CO2
SERIE UNi 11300
9. RISPARMI ENERGETICI POTENZIALI – CASI STUDIO
Proiezione sul 15 % del patrimonio residenziale precedente il 1952
Risparmio energetico potenziale usando i limiti di legge toe/y 1912936.78
Risparmio energetico potenziale usando la media dei valori dei casi
studio toe/y
2236258.19
Risparmio usando i limiti di legge % 7.38
Risparmio% usando la media dei valori dei casi studio % 8.63
Proiezione sul 25 % del patrimonio edilizio residenziale dal 1952 al 2001
Risparmio energetico potenziale usando i limiti di legge toe/y 1893548.96
Risparmio energetico potenziale usando la media dei valori dei casi studio
toe/y
3117066.88
Risparmio usando i limiti di legge %
7.31
Risparmio usando la media dei valori dei casi studio %
12.03
10. AREA B- CONSUMO DI RISORSE – AREA C CARICHI AMBIENTALI
AREA D QUALITA’ INDOOR – ENERGIA E PRESTAZIONI ESTIVE
B.6 Prestazioni dell'involucro Peso
B.6.2
Energia netta per il raffrescamento
58%
Riduzione indice raffrescamento estivo Epe,inv
B.6.3
Trasmittanza termica dell'involucro edilizio
42%
Riduzione trasmittanza termica U,ed / U,lim
B.6.4
Controllo della radiazione solare
0%
Trasmittanza solare del pacchetto finestra, schermo
B.6.5
Inerzia termica dell’edificio
0%
Trasmittanza termica periodica media Yie/Yie,lim
C.6 Impatto sull’ambiente circostante Peso
C.6.8
Effetto isola di calore
100%
Aree esterne in gradi di diminuire l’isola di calore
D.2 Ventilazione Peso
D.2.5
Ventilazione e qualità dell'aria
Garantire la ventilazione trasversale
100%
D.3 Benessere termoigrometrico Peso
D.3.2
Temperatura dell’aria nel periodo estivo
Scarto tra la temperatura operativa e la temperatura idealie
100%
Uni EN ISO 13789 -13786
Uni EN 15251
Uni 10375
12. AREA B- CONSUMO DI RISORSE - MATERIALI
B.4 Materiali eco-compatibili Peso
B.4.1
Riutilizzo di strutture esistenti
Superficie involucro e solai esistente riutilizzata
0%
B.4.6
Materiali riciclati/recuperati
Volume dei materiali e delle terre di scavo riciclati o da recupero utilizzati
18%
B.4.7
Materiali da fonti rinnovabili
Volume dei materiali di origine animale o vegetale utilizzati
18%
B4.8
Materiali locali
Peso dei materiali prodotti entro 200 km
18%
B.4.9
Materiali locali per finiture
Peso dei materiali prodotti entro 200 km
18%
B.4.10
Materiali riciclabili e smontabili
Strategie adottate per permettere la demolizione selettiva – montaggio a secco
10%
B4.11
Materiali certificati
Ricorso a marchi di tipo I e di tipo III
18%
NORME UNi EN ISO 14021-14024-
14025 -14024 -15804
14. AREA B- CONSUMO DI RISORSE AREA C - CARICHI AMBIENTALI
CONSUMI IDRICI
B.5 Acqua potabile Peso
B.5.1
Acqua potabile per irrigazione
Volume d’acqua risparmiata per uso irrigazione
64%
B.5.2
Acqua potabile per usi indoor
Volume acqua per usi domestici risparmiata
36%
C.3 Rifiuti solidi Peso
C.3.2
Rifiuti solidi prodotti in fase operativa
Disponibilità e accessibilità aree attrezzate per la raccolta differenziata
100%
C.4 Acque reflue Peso
C.4.1
Acque grigie inviate in fognatura
Volume di acque grigie risparmiate e riutilizzate
71%
C.4.3
Permeabilità del suolo
Estensione delle are esterne permeabili
29%
NORMA Uni/TS 11445
15. CONFRONTO FATTORI DI IMPATTO - LCA TRA
EDIFICI CON STESSA FORMA E DIMENSIONE
CON INVOLUCRI E IMPIANTI DIVERSI
16. AREA D - BENESSERE INDOOR AREA E –QUALITA’ DEL SERVIZIO
D.4 Benessere visivo Peso
D.4.1
Illuminazione naturale
Fattore medio di luce diurna negli ambienti principali
100%
D.5 Benessere acustico Peso
D.5.6
Qualità acustica dell'edificio
Classe acustica globale
100%
D.6 Inquinamento elettromagnetico Peso
D.6.1
Campi magnetici a frequenza industriale (50Hertz)
Ridurre l’esposizione ai campi elettrici e magnetici
100%
E.2 Funzionalità ed efficienza Peso
E 2.4
Qualità sistema di trasmissione dati
Cablaggio strutturato o rete wireless nelle parti comuni e alloggi
100%
E.3 Controllabilità degli impianti Peso
E3.6
Impianti domotici
Aumentare la dotazione domotica, n. impianti domotici
100%
E.6 Mantenimento delle prestazioni in fase operativa Peso
E.6.1
Mantenimento delle prestazioni dell’involucro edilizio
Assenza di condensa interstiziale nell’involucro
67%
E.6.5
Disponibilità della documentazione tecnica degli edifici
Documentazione tecnica , Piani d’uso, Piani di manutenzione.
33%
NORME UNi EN 15193 - UNi 11367 UNi/TR 11175 –UNi EN 12354- UNi EN ISO 13788
17. DIAGRAMMA STRUMENTI DI ISPEZIONE
RT33
Accredia
OdI
Prassi Uni
13.01.2015
REGISTRO
ITACA
Progettista
D.L.
Committente