Calico in networking mode
•Download as PPT, PDF•
1 like•488 views
This document discusses running Project Calico in Calico networking mode on Kubernetes. It provides commands to start minikube with Calico networking enabled, install Calico by downloading and modifying a YAML manifest file, and verify that Calico pods are running. Calico handles configuring networking and provides network policy in this mode.
Report
Share
Report
Share
Recommended
Calico using vagrant and virtual box
This presentation explains how to deploy a Kubernetes cluster with 3 nodes using Vagrant and VirtualBox. It outlines the dependencies needed, how to download the required files, deploy the Kubernetes master and two nodes, connect to the servers, and verify the environment by checking that the nodes can ping each other and access etcd, and that Docker is running on each node.
Deploying calico on docker
Project Calico provides a layer 3 network implementation for scalable datacenter deployments using minimal packet encapsulation for better resource usage and a simple yet powerful network stack. Calico can be deployed in Docker using a Docker network plugin to provide routing and advanced network policy for containers. The document provides steps to configure Docker with Calico networking by downloading the Calicoctl binary, configuring access to an etcd cluster, and launching the Calico node container.
Calico integration
There are three main components to integrating Calico network policy with Kubernetes: 1) The Calico node container which runs BGP and Felix agents on each Kubernetes node, 2) The CNI plugin which integrates with Kubernetes to configure pods, and 3) The Calico policy controller which implements the Kubernetes NetworkPolicy API and configures Calico policies. Installing these components involves deploying the Calico node container on each node, configuring the CNI plugins, and deploying the Calico policy controller as a Kubernetes pod.
Protecting host with calico
Project Calico is an open-source networking project that provides layer 3 networking for scalable datacenter deployments using a more efficient implementation than traditional overlays. Calico is able to secure network interfaces on hosts using the same security policy model used for workloads. It supports building components like Calicoctl and Calico/node, and defines two types of endpoints - host endpoints for static interfaces and workload endpoints for dynamically managed interfaces. To run Calico and secure host interfaces, basic connectivity and policy is created, host endpoint objects are created in etcd for each interface, and additional security policies can be applied.
Getting started with project calico
The document discusses setting up Project Calico networking on Minikube locally. It describes installing kubectl and Minikube on Ubuntu, then configuring Calico in policy-only mode by starting Minikube with specific flags and installing Calico from a YAML file. Finally, it checks that all pods are running successfully.
Getting started with k8 part2
The document discusses deploying applications to Kubernetes from the command line instead of using the dashboard. It shows how to delete existing deployments, check for current deployments, create a new deployment using `kubectl run` to pull an image from DockerHub, and verify the new deployment is visible both in the command line and dashboard. Deploying via the command line provides an alternative to using just the dashboard.
Calico using rkt
Project Calico provides layer 3 networking and network isolation for scalable Kubernetes and container workloads. This document demonstrates how to set up and test network isolation between rkt containers using Calico on a multi-node cluster. It describes creating Calico networking configurations and profiles for two rkt networks, deploying containers to each network on different nodes, and validating that containers can communicate within but not across networks due to Calico network policies.
Deploying calico on kubernetes
Calico is an open source project that provides networking and network policy in Kubernetes clusters. It uses a pure IP networking fabric for high performance networking and enforces network policies. The document then provides steps to configure a Kubernetes cluster with Calico networking by installing Calico, creating namespaces and pods, applying isolation policies to deny ingress traffic by default, and then allowing access to specific pods by applying a network policy file.
Recommended
Calico using vagrant and virtual box
This presentation explains how to deploy a Kubernetes cluster with 3 nodes using Vagrant and VirtualBox. It outlines the dependencies needed, how to download the required files, deploy the Kubernetes master and two nodes, connect to the servers, and verify the environment by checking that the nodes can ping each other and access etcd, and that Docker is running on each node.
Deploying calico on docker
Project Calico provides a layer 3 network implementation for scalable datacenter deployments using minimal packet encapsulation for better resource usage and a simple yet powerful network stack. Calico can be deployed in Docker using a Docker network plugin to provide routing and advanced network policy for containers. The document provides steps to configure Docker with Calico networking by downloading the Calicoctl binary, configuring access to an etcd cluster, and launching the Calico node container.
Calico integration
There are three main components to integrating Calico network policy with Kubernetes: 1) The Calico node container which runs BGP and Felix agents on each Kubernetes node, 2) The CNI plugin which integrates with Kubernetes to configure pods, and 3) The Calico policy controller which implements the Kubernetes NetworkPolicy API and configures Calico policies. Installing these components involves deploying the Calico node container on each node, configuring the CNI plugins, and deploying the Calico policy controller as a Kubernetes pod.
Protecting host with calico
Project Calico is an open-source networking project that provides layer 3 networking for scalable datacenter deployments using a more efficient implementation than traditional overlays. Calico is able to secure network interfaces on hosts using the same security policy model used for workloads. It supports building components like Calicoctl and Calico/node, and defines two types of endpoints - host endpoints for static interfaces and workload endpoints for dynamically managed interfaces. To run Calico and secure host interfaces, basic connectivity and policy is created, host endpoint objects are created in etcd for each interface, and additional security policies can be applied.
Getting started with project calico
The document discusses setting up Project Calico networking on Minikube locally. It describes installing kubectl and Minikube on Ubuntu, then configuring Calico in policy-only mode by starting Minikube with specific flags and installing Calico from a YAML file. Finally, it checks that all pods are running successfully.
Getting started with k8 part2
The document discusses deploying applications to Kubernetes from the command line instead of using the dashboard. It shows how to delete existing deployments, check for current deployments, create a new deployment using `kubectl run` to pull an image from DockerHub, and verify the new deployment is visible both in the command line and dashboard. Deploying via the command line provides an alternative to using just the dashboard.
Calico using rkt
Project Calico provides layer 3 networking and network isolation for scalable Kubernetes and container workloads. This document demonstrates how to set up and test network isolation between rkt containers using Calico on a multi-node cluster. It describes creating Calico networking configurations and profiles for two rkt networks, deploying containers to each network on different nodes, and validating that containers can communicate within but not across networks due to Calico network policies.
Deploying calico on kubernetes
Calico is an open source project that provides networking and network policy in Kubernetes clusters. It uses a pure IP networking fabric for high performance networking and enforces network policies. The document then provides steps to configure a Kubernetes cluster with Calico networking by installing Calico, creating namespaces and pods, applying isolation policies to deny ingress traffic by default, and then allowing access to specific pods by applying a network policy file.
Setting up a kubernetes cluster on ubuntu 18.04- loves cloud
#Kubernetes has become a de-facto standard for #container orchestration and is becoming ubiquitous with #devops across organizations. As the first part of this series, let us go through the steps involved in deploying a single master node # kubernetes #cluster along with two worker nodes.......#kubernetes #cluster #container #devops #Ubuntu
Calico 3
Calico version 3 has been released with several new features, including storing data in etcd version 3, running Felix on Windows in policy-only mode, supporting migration from Calico v2.6.5, and enhancements to the calicoctl command line utility. It also includes changes such as assigning host veth pairs a standard MAC address, offering an environment variable to clean up old CNI configuration data, and removing support for deprecated etcd configuration variables. However, it has some limitations including only being offered for Kubernetes, OpenShift, and host endpoints integrations currently, and not supporting GoBGP or route reflector clustering.
20170705 kubernetes with calico
This document discusses Kubernetes cluster networking and using Calico for networking. It provides an overview of networking inside a Pod, between Pods, and external access to services. It notes issues with performance using an overlay network and describes how Calico uses BGP routing and etcd to allow Pods to get routing information to connect to other Pods without using an overlay network. It also provides instructions for configuring Kubernetes and Calico, and references additional documentation.
Calico and simple policy
Project Calico is an open source networking and security solution that implements network policy for Kubernetes clusters. It uses layer 3 networking and supports defining network policies with fine-grained control over which connections are allowed between pods. This document discusses using Calico's implementation of the Kubernetes NetworkPolicy API to demonstrate a simple network policy that allows access to nginx pods in a namespace only from a designated access pod, while otherwise isolating pods in that namespace by default.
Calico and open shift
The document discusses how Calico networking can be integrated with OpenShift to provide networking and network policy for container workloads. Some key points:
- Calico is an open source networking and security solution that implements large, scalable cloud data center infrastructures using layer 3 networking.
- It supports rich network policies to provide tenant isolation, security groups, and reachability constraints.
- Calico can integrate easily with OpenShift via the openshift-ansible installer to provide the networking and network policy capabilities for OpenShift workloads.
- It differs from the native OpenShift SDN in that it allocates dynamic IP ranges, connects pods directly to the kernel rather than OVS, and does not require
Cloud Native User Group: Prometheus Day 2
提到 Kubernetes 要如何監測時，標準答案就是 Prometheus 裝下去就對了，但在擁有多個 K8S Cluster 時，組態如何管理，Metric 如何保管，AlertManager 如何設定…等該怎麼做比較好？此分享為 smalltown 透過 Prometheus Operator 整合 Thanos 來監控多個 K8S Cluster 的經驗談，期許大家聽完此分享可以縮短摸索的時間，更輕鬆的使用 Prometheus
Kubernetes networking & Security
This document discusses Kubernetes networking and security. It covers Docker networking and how all containers can communicate without NAT. It also discusses Kubernetes networking using Kubenet, Flannel, and Calico. Specifically, it explains how Kubenet provides networking between pods, how Flannel assigns each host a subnet and routes traffic between nodes, and how Calico uses IPIP encapsulation or routing to provide connectivity between pods.
Kubernetes Networking
The document discusses Kubernetes networking. It describes how Kubernetes networking allows pods to have routable IPs and communicate without NAT, unlike Docker networking which uses NAT. It covers how services provide stable virtual IPs to access pods, and how kube-proxy implements services by configuring iptables on nodes. It also discusses the DNS integration using SkyDNS and Ingress for layer 7 routing of HTTP traffic. Finally, it briefly mentions network plugins and how Kubernetes is designed to be open and customizable.
Java App On Digital Ocean: Deploying With Gitlab CI/CD
This is a complete presentation on how to deploy a SpringBoot app to a digital ocean server. It covers setting up the server, building a sample app and Gitlab CI config file.
Kuryr-Kubernetes: The perfect match for networking cloud native workloads - I...
Kuryr-Kubernetes: The perfect match for networking cloud native workloads - I...Cloud Native Day Tel Aviv
The Kuryr project offers an interesting approach to network cloud native workloads, by enabling container orchestration engines to consume network services from OpenStack Neutron.With pod-in-VM support, Kuryr-Kubernetes enables a whole slew of new hybrid workloads, like bare metal or in-VM pods accessing services that run on VMs, multiple COEs (e.g. Docker Swarm to Kubernetes), and more. Unified networking simplifies deployment, configuration and provides single pane of glass into management and troubleshooting.
Let’s dive into Kuryr Kubernetes and learn how different open source technologies can complement each other in order to enable number of complicated deployment scenarios.Kubernetes Networking
The document discusses Docker networking and Kubernetes networking concepts. It provides an overview of Docker networking and how containers on the same host can communicate. It then summarizes key Kubernetes concepts like pods, replication controllers, services and networking. It demonstrates how to create a replication controller and service for a Tomcat application. It also discusses exposing services externally and additional resources for learning about Docker and Kubernetes.
Simplifying and Securing your OpenShift Network with Project Calico
This document discusses Project Calico and how it can simplify and secure the network in OpenShift. It begins by acknowledging that virtual networking is now common but that current solutions do not scale well. It then discusses how Calico addresses this through a distributed architecture and fine-grained network policies. Calico implements a flat IP network without overlays for improved performance and simplifies troubleshooting. It can also enforce network policies by rendering them into ACL rules distributed to nodes. Calico has been deployed on thousands of clusters and integrates well with orchestrators like OpenShift.
Openstack Quantum
This presentation provides an introduction to OpenStack Quantum, the network connectivity component of OpenStack. It discusses what Quantum is, why it was created, its high-level architecture, current project status, and some additional details. Quantum provides virtual networking and network connectivity as a service for OpenStack compute instances. It aims to address limitations of the earlier nova-network component and provide more flexible network configuration and advanced networking capabilities.
Deploy Prometheus - Grafana and EFK stack on Kubic k8s Clusters
This document discusses how to deploy monitoring and centralized logging on Kubernetes clusters using Prometheus + Grafana and the EFK stack. It provides steps to deploy Kubernetes on Kubic, then install Prometheus + Grafana for monitoring and the EFK (Elasticsearch, Fluentd, Kibana) stack for logging. YAML files and links to deployment guides are referenced to easily set up each component, including configuring Prometheus and Grafana dashboards for visualization.
Docker Networking in OpenStack: What you need to know now
Learn how you bring secure, scalable, available and open software defined networking to Docker containers managed by OpenStack. This session will cover how Docker virtual networks function, how to plumb them into the virtual network fabric and reliably assign information such as IP addresses, virtual interfaces and more. In addition, this session will also cover how to securely wrap Docker containers using security policies and encryption.
Hybrid vFirewall ONAP use case
The document describes a hybrid virtual firewall (vFW) deployment on Kubernetes. It provides a reference deployment of Kubernetes that satisfies ONAP requirements. The deployment provisions a Kubernetes cluster on bare metal or VMs using Ansible playbooks. It then configures various addons and deploys the vFW use case which consists of a packet generator, firewall, and traffic sink virtual functions.
Project kuryr returns: Docker delivered, Kubernetes Next
Slides for the OpenStack Newton Summit in Austin that cover the changes done during the Mitaka cycle and the direction we will take for Neutron. Swarm and Kubernetes integrations explained
Kubernetes101 - Pune Kubernetes Meetup 6
This document provides an overview and agenda for a hands-on Kubernetes workshop. The workshop will cover Kubernetes concepts like pods, deployments, services, labels and selectors. It will demonstrate how to set up a Kubernetes cluster on Google Cloud and on a local laptop. Attendees will get hands-on experience with deploying applications and performing rolling updates using Kubernetes primitives.
Docker Swarm 1.12 Overview and Demo
An overview about Docker's new 1.12 release. This slide deck covers the new features as well as demo including commands to start up your own Docker Swarm on either Docker for Mac or Docker for Windows and deploy a Docker Service
The presentation was delivered via a container running RevealJS which is where some of the some formatting issues come from in SlideShare.
Deploying vn fs with kubernetes pods and vms
This document discusses deploying virtual network functions (VNFs) using Kubernetes pods and VMs. It covers using single root I/O virtualization (SR-IOV) and Open vSwitch with Data Plane Development Kit (OVS-DPDK) for high performance networking. SR-IOV allows VNFs direct access to network interface cards to bypass the hypervisor. OVS-DPDK processes packets in userspace using DPDK for accelerated performance compared to native Linux networking or SR-IOV for some workloads. The document provides configuration details for enabling SR-IOV and OVS-DPDK on the host and specifying network interfaces in KubeVirt virtual machine instances.
Monitoring Docker Containers with Metricbeat, Elasticsearch, and Kibana
In this presentation, you’ll learn how use Metricbeat to monitor bare Docker containers and shipping container data to Elasticsearch and Kibana.
Setting up the fabric v 0.6 in hyperledger
This document provides instructions for setting up Hyperledger Fabric version 0.6 using Docker containers. It outlines downloading the necessary software, cloning the Fabric codebase, running a network of four peer nodes, registering and enrolling users, deploying and invoking a sample chaincode.
More Related Content
What's hot
Setting up a kubernetes cluster on ubuntu 18.04- loves cloud
#Kubernetes has become a de-facto standard for #container orchestration and is becoming ubiquitous with #devops across organizations. As the first part of this series, let us go through the steps involved in deploying a single master node # kubernetes #cluster along with two worker nodes.......#kubernetes #cluster #container #devops #Ubuntu
Calico 3
Calico version 3 has been released with several new features, including storing data in etcd version 3, running Felix on Windows in policy-only mode, supporting migration from Calico v2.6.5, and enhancements to the calicoctl command line utility. It also includes changes such as assigning host veth pairs a standard MAC address, offering an environment variable to clean up old CNI configuration data, and removing support for deprecated etcd configuration variables. However, it has some limitations including only being offered for Kubernetes, OpenShift, and host endpoints integrations currently, and not supporting GoBGP or route reflector clustering.
20170705 kubernetes with calico
This document discusses Kubernetes cluster networking and using Calico for networking. It provides an overview of networking inside a Pod, between Pods, and external access to services. It notes issues with performance using an overlay network and describes how Calico uses BGP routing and etcd to allow Pods to get routing information to connect to other Pods without using an overlay network. It also provides instructions for configuring Kubernetes and Calico, and references additional documentation.
Calico and simple policy
Project Calico is an open source networking and security solution that implements network policy for Kubernetes clusters. It uses layer 3 networking and supports defining network policies with fine-grained control over which connections are allowed between pods. This document discusses using Calico's implementation of the Kubernetes NetworkPolicy API to demonstrate a simple network policy that allows access to nginx pods in a namespace only from a designated access pod, while otherwise isolating pods in that namespace by default.
Calico and open shift
The document discusses how Calico networking can be integrated with OpenShift to provide networking and network policy for container workloads. Some key points:
- Calico is an open source networking and security solution that implements large, scalable cloud data center infrastructures using layer 3 networking.
- It supports rich network policies to provide tenant isolation, security groups, and reachability constraints.
- Calico can integrate easily with OpenShift via the openshift-ansible installer to provide the networking and network policy capabilities for OpenShift workloads.
- It differs from the native OpenShift SDN in that it allocates dynamic IP ranges, connects pods directly to the kernel rather than OVS, and does not require
Cloud Native User Group: Prometheus Day 2
提到 Kubernetes 要如何監測時，標準答案就是 Prometheus 裝下去就對了，但在擁有多個 K8S Cluster 時，組態如何管理，Metric 如何保管，AlertManager 如何設定…等該怎麼做比較好？此分享為 smalltown 透過 Prometheus Operator 整合 Thanos 來監控多個 K8S Cluster 的經驗談，期許大家聽完此分享可以縮短摸索的時間，更輕鬆的使用 Prometheus
Kubernetes networking & Security
This document discusses Kubernetes networking and security. It covers Docker networking and how all containers can communicate without NAT. It also discusses Kubernetes networking using Kubenet, Flannel, and Calico. Specifically, it explains how Kubenet provides networking between pods, how Flannel assigns each host a subnet and routes traffic between nodes, and how Calico uses IPIP encapsulation or routing to provide connectivity between pods.
Kubernetes Networking
The document discusses Kubernetes networking. It describes how Kubernetes networking allows pods to have routable IPs and communicate without NAT, unlike Docker networking which uses NAT. It covers how services provide stable virtual IPs to access pods, and how kube-proxy implements services by configuring iptables on nodes. It also discusses the DNS integration using SkyDNS and Ingress for layer 7 routing of HTTP traffic. Finally, it briefly mentions network plugins and how Kubernetes is designed to be open and customizable.
Java App On Digital Ocean: Deploying With Gitlab CI/CD
This is a complete presentation on how to deploy a SpringBoot app to a digital ocean server. It covers setting up the server, building a sample app and Gitlab CI config file.
Kuryr-Kubernetes: The perfect match for networking cloud native workloads - I...
Kuryr-Kubernetes: The perfect match for networking cloud native workloads - I...Cloud Native Day Tel Aviv
The Kuryr project offers an interesting approach to network cloud native workloads, by enabling container orchestration engines to consume network services from OpenStack Neutron.With pod-in-VM support, Kuryr-Kubernetes enables a whole slew of new hybrid workloads, like bare metal or in-VM pods accessing services that run on VMs, multiple COEs (e.g. Docker Swarm to Kubernetes), and more. Unified networking simplifies deployment, configuration and provides single pane of glass into management and troubleshooting.
Let’s dive into Kuryr Kubernetes and learn how different open source technologies can complement each other in order to enable number of complicated deployment scenarios.Kubernetes Networking
The document discusses Docker networking and Kubernetes networking concepts. It provides an overview of Docker networking and how containers on the same host can communicate. It then summarizes key Kubernetes concepts like pods, replication controllers, services and networking. It demonstrates how to create a replication controller and service for a Tomcat application. It also discusses exposing services externally and additional resources for learning about Docker and Kubernetes.
Simplifying and Securing your OpenShift Network with Project Calico
This document discusses Project Calico and how it can simplify and secure the network in OpenShift. It begins by acknowledging that virtual networking is now common but that current solutions do not scale well. It then discusses how Calico addresses this through a distributed architecture and fine-grained network policies. Calico implements a flat IP network without overlays for improved performance and simplifies troubleshooting. It can also enforce network policies by rendering them into ACL rules distributed to nodes. Calico has been deployed on thousands of clusters and integrates well with orchestrators like OpenShift.
Openstack Quantum
This presentation provides an introduction to OpenStack Quantum, the network connectivity component of OpenStack. It discusses what Quantum is, why it was created, its high-level architecture, current project status, and some additional details. Quantum provides virtual networking and network connectivity as a service for OpenStack compute instances. It aims to address limitations of the earlier nova-network component and provide more flexible network configuration and advanced networking capabilities.
Deploy Prometheus - Grafana and EFK stack on Kubic k8s Clusters
This document discusses how to deploy monitoring and centralized logging on Kubernetes clusters using Prometheus + Grafana and the EFK stack. It provides steps to deploy Kubernetes on Kubic, then install Prometheus + Grafana for monitoring and the EFK (Elasticsearch, Fluentd, Kibana) stack for logging. YAML files and links to deployment guides are referenced to easily set up each component, including configuring Prometheus and Grafana dashboards for visualization.
Docker Networking in OpenStack: What you need to know now
Learn how you bring secure, scalable, available and open software defined networking to Docker containers managed by OpenStack. This session will cover how Docker virtual networks function, how to plumb them into the virtual network fabric and reliably assign information such as IP addresses, virtual interfaces and more. In addition, this session will also cover how to securely wrap Docker containers using security policies and encryption.
Hybrid vFirewall ONAP use case
The document describes a hybrid virtual firewall (vFW) deployment on Kubernetes. It provides a reference deployment of Kubernetes that satisfies ONAP requirements. The deployment provisions a Kubernetes cluster on bare metal or VMs using Ansible playbooks. It then configures various addons and deploys the vFW use case which consists of a packet generator, firewall, and traffic sink virtual functions.
Project kuryr returns: Docker delivered, Kubernetes Next
Slides for the OpenStack Newton Summit in Austin that cover the changes done during the Mitaka cycle and the direction we will take for Neutron. Swarm and Kubernetes integrations explained
Kubernetes101 - Pune Kubernetes Meetup 6
This document provides an overview and agenda for a hands-on Kubernetes workshop. The workshop will cover Kubernetes concepts like pods, deployments, services, labels and selectors. It will demonstrate how to set up a Kubernetes cluster on Google Cloud and on a local laptop. Attendees will get hands-on experience with deploying applications and performing rolling updates using Kubernetes primitives.
Docker Swarm 1.12 Overview and Demo
An overview about Docker's new 1.12 release. This slide deck covers the new features as well as demo including commands to start up your own Docker Swarm on either Docker for Mac or Docker for Windows and deploy a Docker Service
The presentation was delivered via a container running RevealJS which is where some of the some formatting issues come from in SlideShare.
Deploying vn fs with kubernetes pods and vms
This document discusses deploying virtual network functions (VNFs) using Kubernetes pods and VMs. It covers using single root I/O virtualization (SR-IOV) and Open vSwitch with Data Plane Development Kit (OVS-DPDK) for high performance networking. SR-IOV allows VNFs direct access to network interface cards to bypass the hypervisor. OVS-DPDK processes packets in userspace using DPDK for accelerated performance compared to native Linux networking or SR-IOV for some workloads. The document provides configuration details for enabling SR-IOV and OVS-DPDK on the host and specifying network interfaces in KubeVirt virtual machine instances.
What's hot (20)
Setting up a kubernetes cluster on ubuntu 18.04- loves cloud
Setting up a kubernetes cluster on ubuntu 18.04- loves cloud
Java App On Digital Ocean: Deploying With Gitlab CI/CD
Java App On Digital Ocean: Deploying With Gitlab CI/CD
Kuryr-Kubernetes: The perfect match for networking cloud native workloads - I...
Kuryr-Kubernetes: The perfect match for networking cloud native workloads - I...
Simplifying and Securing your OpenShift Network with Project Calico
Simplifying and Securing your OpenShift Network with Project Calico
Deploy Prometheus - Grafana and EFK stack on Kubic k8s Clusters
Deploy Prometheus - Grafana and EFK stack on Kubic k8s Clusters
Docker Networking in OpenStack: What you need to know now
Docker Networking in OpenStack: What you need to know now
Project kuryr returns: Docker delivered, Kubernetes Next
Project kuryr returns: Docker delivered, Kubernetes Next
Similar to Calico in networking mode
Monitoring Docker Containers with Metricbeat, Elasticsearch, and Kibana
In this presentation, you’ll learn how use Metricbeat to monitor bare Docker containers and shipping container data to Elasticsearch and Kibana.
Setting up the fabric v 0.6 in hyperledger
This document provides instructions for setting up Hyperledger Fabric version 0.6 using Docker containers. It outlines downloading the necessary software, cloning the Fabric codebase, running a network of four peer nodes, registering and enrolling users, deploying and invoking a sample chaincode.
Install a micro k8s single node cluster of kubernetes on windows 10
This document provides instructions for installing MicroK8s, a lightweight Kubernetes distribution, on a Ubuntu virtual machine running on Windows 10 using Hyper-V and Multipass. It describes enabling Hyper-V, creating an Ubuntu VM with Multipass, installing MicroK8s via snap, and deploying a test Nginx application. Additional steps cover enabling standard Kubernetes addons like DNS, dashboard, and registry and accessing the Kubernetes dashboard UI.
Deploy the blockchain network using kubernetes ap is on google cloud
This document provides instructions for deploying a Hyperledger Fabric 1.2 blockchain network with Hyperledger Composer 0.20 using Kubernetes APIs on Google Cloud Platform. It describes using Kubernetes concepts like pods, jobs, deployments and services to run the blockchain network. Steps include modifying configuration files, running a script to deploy the network onto the Kubernetes cluster, testing transactions, and viewing the deployed network on the Kubernetes dashboard.
Kubernetes and Istio
Istio Introduction
Setup
Shopping Portal Microservice Deployment
Canary Deployment
Routing Rules based on User Agent and Weight
Distributed Tracing
Visualizing Metrics
Docker and IBM Integration Bus
This document provides an overview of using Docker containers with IBM Integration Bus (IIB). It discusses how to build Docker images for IIB that include the runtime binaries. It also demonstrates running IIB in a Docker container, including exposing ports and using volumes to persist data. Additional topics covered include building images from existing runtime archives, running IIB with MQ, and deploying BAR files to IIB from within a Docker container.
kubernetes practice
The document provides instructions for setting up a Kubernetes cluster with one master node and one worker node on VirtualBox. It outlines the system requirements for the nodes, describes how to configure the networking and hostnames, install Docker and Kubernetes, initialize the master node with kubeadm init, join the worker node with kubeadm join, and deploy a test pod. It also includes commands to check the cluster status and remove existing Docker installations.
K8s - Setting up minikube
How to deploy minikube to test Kubernetes deployments. This presentation shows how to deploy minikube on Linux and MacOS with docker.
Java microservicesdockerdockerhubusecase2
The document describes steps to deploy a Java microservices Spring Boot project using Docker. It involves creating a Spring Boot project with REST API, building a Docker image with the application jar, and running the Docker container mapping the internal port to an external port. The Docker image is then deployed on DockerHub and pulled to deploy the application.
Setup Kubernetes with flannel on ubuntu platform
This document provides instructions for setting up Kubernetes with 2 nodes using kubeadm and flannel on Ubuntu. It describes installing Docker and Kubernetes, initializing the master node with kubeadm init, joining the worker node with the kubeadm join command, installing and configuring flannel as the pod network, and deploying and exposing the Kubernetes dashboard for management. Specific steps include installing Docker, initializing the master, saving the join command, installing flannel on all nodes, joining the worker, installing the dashboard and changing its service type to NodePort for external access.
Advancing Bitcoin 2019 - BTCPayServer Architecture
The document discusses the deployment of BTCPay Server using Docker containers. It describes how BTCPay Server is configured using Docker Compose files that are generated from fragments to define services like Bitcoin Core, Postgres, and plugins. Setup and management scripts are provided to generate configurations, start/stop containers, and update dependencies. The system is extensible through additional fragments and supports integrating new coins and plugins while maintaining updates through the main repository.
kubeadm Cluster Creation Internals_ From Self-Hosting to Upgradability and HA...
This document summarizes a talk given at KubeCon Austin about kubeadm cluster creation internals. It discusses what kubeadm is and how it fits into the Kubernetes ecosystem. It then details the technical aspects of what kubeadm does during initialization, including generating certificates, config files, static pod manifests, and deploying addons. It also covers how kubeadm handles upgrades and discusses approaches to achieving high availability.
Learn kubernetes in 90 minutes
This document provides an agenda and instructions for learning Kubernetes in 90 minutes. The agenda includes exercises on running a first web service in Kubernetes, revisiting pods, deployments and services, deploying with YAML files, and installing a microservices application called Guestbook. Key Kubernetes concepts covered include pods, deployments, services, YAML descriptors, and using deployments to scale applications. The document also provides background on containers, Docker, and the Kubernetes architecture.
Tectonic Summit 2016: Kubernetes 1.5 and Beyond
Kubernetes 1.5 introduces several new features to simplify cluster setup and improve scheduling. It provides an easy way to initialize a Kubernetes cluster with a single command using kubeadm. Multiple clusters can also be easily federated together using kubefed. Additionally, Kubernetes 1.5 enhances scheduling capabilities with taints and tolerations, which allow pods to be selectively scheduled to nodes based on hardware requirements like GPUs. This helps optimize workload placement on large, heterogeneous clusters.
Kubernetes installation
This document describes how to create a 3 node Kubernetes cluster using kubeadm. It provides instructions for initializing the master node, joining the worker nodes to the cluster, and deploying the flannel pod network. Key steps include disabling SELinux and swap, installing Docker, kubeadm and kubelet, initializing the master with kubeadm init, joining the workers with kubeadm join, and applying the flannel YAML.
Kubecon 2017 Zero Touch Kubernetes
This document discusses zero-configuration provisioning of Kubernetes clusters on unmanaged infrastructure. It describes using immutable bootstrapping to provision operating systems and install Docker and Kubernetes (using Kubeadm) across nodes without requiring centralized orchestration or SSH access. The document also discusses potential future directions for the Kubernetes community regarding node admission controls and dynamic Kubelet configuration to further reduce external configuration requirements during cluster provisioning.
KubeCon 2017 Zero Touch Provision
Rob Hirschfeld talk at the 2017 KubeCon in Austin, TX. In this talk he presents an Immutable Bootstrap demo of Kubernetes using Kubeadm to provision on bare metal. Talk URL http://sched.co/CU8h.
kubernetes_info.doc
Kubernetes requires at least two nodes, one master and one worker, to create a cluster. The document then explains how to install Kubernetes using apt on Ubuntu, select the IP for the master, and initialize it. It describes building a Docker image, pushing it to Docker Hub, creating a deployment using kubectl that uses the image, exposing the deployment as a NodePort service, and viewing the application in a web browser by getting the service URL from Minikube.
k8s.doc
Kubernetes requires at least two nodes, one master and one worker, to create a cluster. The document then explains how to install Kubernetes using apt on Ubuntu, select the IP for the master, and initialize it. It describes building a Docker image, pushing it to Docker Hub, creating a deployment using the image, exposing the deployment port, and viewing the application in a browser by getting the service URL.
Kamailio on Docker
This document discusses how to configure Kamailio as a session border controller (SBC) using Docker. It provides an introduction to Kamailio and explains how to install Kamailio from source on a CentOS Docker container. Specific steps are outlined to configure Kamailio to use MySQL, create the database schema, modify the configuration file to use the private and public IP addresses, and start the Kamailio server. The document also provides instructions for testing Kamailio by getting the error log, creating SIP user accounts, and registering a SIP softphone.
Similar to Calico in networking mode (20)
Monitoring Docker Containers with Metricbeat, Elasticsearch, and Kibana
Monitoring Docker Containers with Metricbeat, Elasticsearch, and Kibana
Install a micro k8s single node cluster of kubernetes on windows 10
Install a micro k8s single node cluster of kubernetes on windows 10
Deploy the blockchain network using kubernetes ap is on google cloud
Deploy the blockchain network using kubernetes ap is on google cloud
Advancing Bitcoin 2019 - BTCPayServer Architecture
Advancing Bitcoin 2019 - BTCPayServer Architecture
kubeadm Cluster Creation Internals_ From Self-Hosting to Upgradability and HA...
kubeadm Cluster Creation Internals_ From Self-Hosting to Upgradability and HA...
More from Anirban Sen Chowdhary
Change the game with Game changer
RingCentral is an award-winning cloud-based communications system with a large developer community called "Game Changer" that connects developers, users, and customers. Through Game Changer, developers can interact, help each other, share ideas, and participate in activities to learn about RingCentral's products and APIs while earning points and rewards. The platform aims to learn and contribute to the community in a fun way.
Some basics with ring central
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Ring central and python
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help boost feelings of calmness and well-being.
RingCentral application development overview
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Cloze connect ringcentral
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Overview on ring central errors part 4
The API allows 10 heavy, 40 medium, 50 light requests per user and 5 authorization requests; exceeding these thresholds will result in a 429 Too Many Requests HTTP error code. The document discusses that when requests begin exceeding limitations, servers commonly return responses with a 429 status.
Setting up your ring central sandbox in steps
RingCentral provides a sandbox environment for developers to test and build applications using its APIs. The summary outlines 5 steps to set up a RingCentral sandbox account:
1) Get a developer account on the RingCentral developer portal.
2) Log into the developer account and locate the sandbox account details.
3) Set the password for the sandbox account and log into the online account portal.
4) Create a test application on the developer dashboard by selecting the platform and feature to access via APIs.
5) The application API key and secret can then be used to test the application using the RingCentral APIs.
Overview on ring central errors: part 2
This document discusses server errors that can occur in the RingCentral application programming interface (API). Server errors have an HTTP status code in the 50x range and can be difficult to diagnose without access to server logs. Common causes include high traffic or maintenance. If the error persists, the RingCentral developer support team can investigate server logs to resolve the issue.
Overview on ring central errors
RingCentral offers communication services like VoIP calling, web meetings, and fax through a secure cloud phone system. Creating RingCentral applications is easy and can be done within minutes by logging into the RingCentral developer account. Once created, applications can access RingCentral APIs based on permissions and features. The RingCentral API uses specific error codes to simplify error processing for client applications. There are different categories of errors like server errors (HTTP 50x), authentication errors (HTTP 40x), and rate limiting errors (HTTP 429).
Call recording overview ring central
RingCentral provides call recording capabilities that allow recordings to be retrieved and streamed via their API. This enables uses cases like analyzing recordings to enhance customer interactions. RingCentral's call recording APIs support streaming playback of recordings using HTML5 audio tags without needing to download the file. Automatic call recording is not turned on by default and must be enabled in the account settings.
Ring central engaging with amazon alexa
RingCentral is integrating with Amazon Alexa to allow users to access RingCentral's communication services like voip calling, meetings, and faxes using voice commands with Alexa. This integration allows users to start and control RingCentral meetings, send messages, and make calls just by talking to Alexa. The integration authenticates users with voice recognition and securely connects RingCentral services with Alexa's voice assistant capabilities.
How ring central sdk changing the game
RingCentral provides communication services like voice calls, SMS, fax, and online meetings through their APIs. They have SDKs available for many programming languages to make it easy for developers to integrate these services into their applications. The RingCentral SDKs handle tasks like authorization and provide helper functions for working with API requests and responses. This allows developers across different platforms and languages to quickly add powerful communication capabilities to their applications.
When ring central connect salesforce
RingCentral integrates with Salesforce to provide seamless communication capabilities within the CRM. This improves customer retention, agent productivity, and business processes. The integration empowers the Salesforce system with RingCentral phone features and creates a more collaborative CRM experience. It allows users to create accounts, leads, contacts, and opportunities while on calls through a 360-degree view of customers. The integration is available on all browsers and devices and provides customized reports and dashboards along with accurate call and SMS logs to enhance the CRM experience.
Mule 4 connecting ring central
The document describes how to connect RingCentral APIs to send SMS messages using Mulesoft Mule 4. It involves creating a Mule application with a flow containing an HTTP listener, payload transformer, and HTTP request to call the RingCentral send SMS API. The flow first calls the RingCentral authorization API to get an access token, stores it in a variable, and passes it in the header when calling the send SMS API. This allows the application to authenticate and send SMS texts via the RingCentral API using Mule 4.
Ring central sdk
RingCentral exposes powerful communication APIs that allow sending messages via SMS, fax, or call from applications integrated with RingCentral. It provides SDKs for languages like Java, PHP, Python, and JavaScript to facilitate API access and handle authentication. The SDKs package RingCentral's API functionality into easy-to-use libraries for each language and handle tasks like token management. This allows developers across platforms and languages to quickly build communication features into their applications.
Ring central with okta
RingCentral and Okta integrate to provide secure single sign-on and identity management for RingCentral users. This allows users to access their RingCentral phone numbers from any mobile device securely. New users created in an organization's Active Directory will be automatically provisioned to RingCentral. The integration provides enterprise single sign-on so users only need to authenticate once to access multiple applications. It improves security, efficiency and simplicity by reducing the need for multiple credentials across different applications.
Ring central connecting salesforce overview
RingCentral is a leading cloud-based communication system that integrates with Salesforce to improve customer retention, agent productivity, and business processes. The integration allows users to create and manage Salesforce records while on calls through RingCentral, providing a 360-degree view of customers. It seamlessly connects the phone system and CRM for improved workflows and increased productivity.
Ring central call logs overview (part 2)
The document discusses RingCentral call logs and APIs. It provides the API URL to access call logs and notes that there is typically a 30 second delay before completed call details are available. It also mentions an API to access active/in-progress calls and that call log and call recording permissions are required. Finally, it notes administrators can enable/disable call log delivery and permissions.
More from Anirban Sen Chowdhary (20)
Recently uploaded
Skybuffer SAM4U tool for SAP license adoption
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Apps Break Data
How information systems are built or acquired puts information, which is what they should be about, in a secondary place. Our language adapted accordingly, and we no longer talk about information systems but applications. Applications evolved in a way to break data into diverse fragments, tightly coupled with applications and expensive to integrate. The result is technical debt, which is re-paid by taking even bigger "loans", resulting in an ever-increasing technical debt. Software engineering and procurement practices work in sync with market forces to maintain this trend. This talk demonstrates how natural this situation is. The question is: can something be done to reverse the trend?
Biomedical Knowledge Graphs for Data Scientists and Bioinformaticians
Dmitrii Kamaev, PhD
Senior Product Owner - QIAGEN
GNSS spoofing via SDR (Criptored Talks 2024)
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...Pitangent Analytics & Technology Solutions Pvt. Ltd
Discover top-tier mobile app development services, offering innovative solutions for iOS and Android. Enhance your business with custom, user-friendly mobile applications.Dandelion Hashtable: beyond billion requests per second on a commodity server
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
The typical problem in product engineering is not bad strategy, so much as “no strategy”. This leads to confusion, lack of motivation, and incoherent action. The next time you look for a strategy and find an empty space, instead of waiting for it to be filled, I will show you how to fill it in yourself. If you’re wrong, it forces a correction. If you’re right, it helps create focus. I’ll share how I’ve approached this in the past, both what works and lessons for what didn’t work so well.
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
Inconsistent user experience and siloed data, high costs, and changing customer expectations – Citizens Bank was experiencing these challenges while it was attempting to deliver a superior digital banking experience for its clients. Its core banking applications run on the mainframe and Citizens was using legacy utilities to get the critical mainframe data to feed customer-facing channels, like call centers, web, and mobile. Ultimately, this led to higher operating costs (MIPS), delayed response times, and longer time to market.
Ever-changing customer expectations demand more modern digital experiences, and the bank needed to find a solution that could provide real-time data to its customer channels with low latency and operating costs. Join this session to learn how Citizens is leveraging Precisely to replicate mainframe data to its customer channels and deliver on their “modern digital bank” experiences.
Principle of conventional tomography-Bibash Shahi ppt..pptx
before the computed tomography, it had been widely used.
Leveraging the Graph for Clinical Trials and Standards
Katja Glaß
OpenStudyBuilder Community Manager - Katja Glaß Consulting
Marius Conjeaud
Principal Consultant - Neo4j
Main news related to the CCS TSI 2023 (2023/1695)
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
“How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-eff...
“How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-eff...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/how-axelera-ai-uses-digital-compute-in-memory-to-deliver-fast-and-energy-efficient-computer-vision-a-presentation-from-axelera-ai/
Bram Verhoef, Head of Machine Learning at Axelera AI, presents the “How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-efficient Computer Vision” tutorial at the May 2024 Embedded Vision Summit.
As artificial intelligence inference transitions from cloud environments to edge locations, computer vision applications achieve heightened responsiveness, reliability and privacy. This migration, however, introduces the challenge of operating within the stringent confines of resource constraints typical at the edge, including small form factors, low energy budgets and diminished memory and computational capacities. Axelera AI addresses these challenges through an innovative approach of performing digital computations within memory itself. This technique facilitates the realization of high-performance, energy-efficient and cost-effective computer vision capabilities at the thin and thick edge, extending the frontier of what is achievable with current technologies.
In this presentation, Verhoef unveils his company’s pioneering chip technology and demonstrates its capacity to deliver exceptional frames-per-second performance across a range of standard computer vision networks typical of applications in security, surveillance and the industrial sector. This shows that advanced computer vision can be accessible and efficient, even at the very edge of our technological ecosystem.Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks creates AI-boosted business software that helps employees work more efficiently and effectively. Managing data across multiple RDBMS and NoSQL databases was already a challenge at their current scale. To prepare for 10X growth, they knew it was time to rethink their database strategy. Learn how they architected a solution that would simplify scaling while keeping costs under control.
The Microsoft 365 Migration Tutorial For Beginner.pptx
This presentation will help you understand the power of Microsoft 365. However, we have mentioned every productivity app included in Office 365. Additionally, we have suggested the migration situation related to Office 365 and how we can help you.
You can also read: https://www.systoolsgroup.com/updates/office-365-tenant-to-tenant-migration-step-by-step-complete-guide/
Recently uploaded (20)
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
Biomedical Knowledge Graphs for Data Scientists and Bioinformaticians
Biomedical Knowledge Graphs for Data Scientists and Bioinformaticians
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...
Dandelion Hashtable: beyond billion requests per second on a commodity server
Dandelion Hashtable: beyond billion requests per second on a commodity server
9 CEO's who hit $100m ARR Share Their Top Growth Tactics Nathan Latka, Founde...
9 CEO's who hit $100m ARR Share Their Top Growth Tactics Nathan Latka, Founde...
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
Principle of conventional tomography-Bibash Shahi ppt..pptx
Principle of conventional tomography-Bibash Shahi ppt..pptx
Leveraging the Graph for Clinical Trials and Standards
Leveraging the Graph for Clinical Trials and Standards
“How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-eff...
“How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-eff...
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
The Microsoft 365 Migration Tutorial For Beginner.pptx
The Microsoft 365 Migration Tutorial For Beginner.pptx
Calico in networking mode
- 2. In my last , we had a demonstration of Project Calico (https://www.projectcalico.org/) in Policy-only mode. In this post, we will see Project Calico(https://www.projectcalico.org/) in Calico networking mode. So as we know, we first require kubectl and minikube as we seen in that last post.
- 3. We will start minikube with following command: minikube start --memory 2096 --network-plugin=cni --host-only-cidr 172.17.17.1/24 --extra-config=kubelet.ClusterCIDR=192.168.0.0/16 --extra-config=proxy.ClusterCIDR=192.168.0.0/16 --extra-config=controller-manager.ClusterCIDR=192.168.0.0/16
- 4. We can see in the following screen:
- 5. and after some time it get started as below: In this mode Calico handles configuring the networking and provides policy.
- 6. After kubernetes is started with the above command then it is possible to install Calico though some slight modifications will need to be made to the manifests. The following commands can be used to pull down a manifest, update it, and then apply the manifest: sudo curl -O -L https://docs.projectcalico.org/v2.4/getting- started/kubernetes/installation/hosted/kubeadm/1.6/calico .yaml
- 7. We can see as below:
- 8. Then update it as follow: sudo sed -i -e '/nodeSelector/d' calico.yaml
- 9. We can see that below:
- 10. Followed by following command: sudo sed -i -e '/node-role.kubernetes.io/master: ""/d' calico.yaml
- 11. We can see that below:
- 12. And then the following: sudo sed -i -e 's/10.96.232/10.0.0/' calico.yaml
- 13. We can see that below:
- 14. And we can use following commands to install Calico: kubectl apply -f calico.yaml
- 15. We can see that below:
- 16. To confirm that all of the pods are running with the following command: kubectl get pods --all-namespaces
- 17. We can see that below:
- 18. So, we can see easily how Calico handles configuring the networking and provides policy. This is Calico in networking mode.