FOR MORE CLASSES VISIT
www.bus640homework.com
BUS 640 Week 1 DQ 1 Firm Objectives
BUS 640 Week 1 DQ 2 Decision Making Under Uncertainty
BUS 640 Week 1 Economics of Risk and Uncertainty Applied Problems
BUS 640 Week 2 DQ 1 Marginal Rate of Substitution
BUS 640 Week 2 DQ 2 Demand Elasticity
BUS 640 Week 2 Consumer Demand Analysis and..
FOR MORE CLASSES VISIT
www.bus640homework.com
BUS 640 Week 1 DQ 1 Firm Objectives
BUS 640 Week 1 DQ 2 Decision Making Under Uncertainty
BUS 640 Week 1 Economics of Risk and Uncertainty Applied Problems
BUS 640 Week 2 DQ 1 Marginal Rate of Substitution
BUS 640 Week 2 DQ 2 Demand Elasticity
BUS 640 Week 2 Consumer Demand Analysis and..
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
This is a presentation by Dada Robert in a Your Skill Boost masterclass organised by the Excellence Foundation for South Sudan (EFSS) on Saturday, the 25th and Sunday, the 26th of May 2024.
He discussed the concept of quality improvement, emphasizing its applicability to various aspects of life, including personal, project, and program improvements. He defined quality as doing the right thing at the right time in the right way to achieve the best possible results and discussed the concept of the "gap" between what we know and what we do, and how this gap represents the areas we need to improve. He explained the scientific approach to quality improvement, which involves systematic performance analysis, testing and learning, and implementing change ideas. He also highlighted the importance of client focus and a team approach to quality improvement.
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
Ethnobotany and Ethnopharmacology:
Ethnobotany in herbal drug evaluation,
Impact of Ethnobotany in traditional medicine,
New development in herbals,
Bio-prospecting tools for drug discovery,
Role of Ethnopharmacology in drug evaluation,
Reverse Pharmacology.
The Art Pastor's Guide to Sabbath | Steve ThomasonSteve Thomason
What is the purpose of the Sabbath Law in the Torah. It is interesting to compare how the context of the law shifts from Exodus to Deuteronomy. Who gets to rest, and why?
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptxEduSkills OECD
Andreas Schleicher presents at the OECD webinar ‘Digital devices in schools: detrimental distraction or secret to success?’ on 27 May 2024. The presentation was based on findings from PISA 2022 results and the webinar helped launch the PISA in Focus ‘Managing screen time: How to protect and equip students against distraction’ https://www.oecd-ilibrary.org/education/managing-screen-time_7c225af4-en and the OECD Education Policy Perspective ‘Students, digital devices and success’ can be found here - https://oe.cd/il/5yV
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
MARUTI SUZUKI- A Successful Joint Venture in India.pptx
BUS 644 Entire Course NEW
1. ASH BUS 644 Entire Course NEW
Check this A+ tutorial guideline at
http://www.uopassignments.com/bus-644-
ash/bus-644-entire-course-recent
For more classes visit
http://www.uopassignments.com/
BUS 644 Entire Course NEW
BUS 644 Week 1 DQ 1 Ethical Issues and Operations
NEW
BUS 644 Week 1 DQ 2 Business Processes NEW
BUS 644 Week 1 Midas Case Study NEW
BUS 644 Week 2 DQ 1 Productivity NEW
2. BUS 644 Week 2 DQ 2 Product Design and Quality
NEW
BUS 644 Week 2 Memorial Hospital Case Study NEW
BUS 644 Week 3 DQ 1 Suppliers NEW
BUS 644 Week 3 DQ 2 Forecasting Methods NEW
BUS 644 Week 3 Outsourcing NEW
BUS 644 Week 4 Beck Manufacturing and Plant
Capacity NEW
BUS 644 Week 4 DQ 1 Process Selection Product
Design and Capacity NEW
3. BUS 644 Week 4 DQ 2 Monique Food Processing
Company and Capacity NEW
BUS 644 Week 5 Alliance Supermarket and Point-of-
Sale (POS) systems NEW
BUS 644 Week 5 DQ 1 MRP Inventory and Customer
Service NEW
BUS 644 Week 5 DQ 2 Perpetual versus Periodic
Inventory Systems NEW
BUS 644 Week 6 DQ 1 Just-in-Time (JIT) Inventories
NEW
BUS 644 Week 6 DQ 2 Scheduling Procedures NEW
BUS 644 Week 6 Final Paper (Space Age Furniture
Problem) NEW
4. ASH BUS 644 Week 1 DQ 1 Ethical Issues and
Operations NEW
Check this A+ tutorial guideline at
http://www.uopassignments.com/bus-644-
ash/bus-644-week-1-dq-1-ethical-issues-and-
operations-recent
For more classes visit
http://www.uopassignments.com/
BUS 644 Week 1 DQ 1 Ethical Issues and Operations
NEW
Week 1 DQ 1 Ethical Issues and Operations
Ethical Issues and Operations. Ethical behavior is a
corporate issuethat affects the company’s bottom line.
How do ethical issues impact organizations and
operations? Include an example seen in the workplace,
in the news, etc. that relates to real-life situations.
Your initial post should be at least 200-250 words.
5. ASH BUS 644 Week 1 DQ 2 Business Processes
NEW
Check this A+ tutorial guideline at
http://www.uopassignments.com/bus-644-
ash/bus-644-week-1-dq-2-business-processes-
recent
For more classes visit
http://www.uopassignments.com/
BUS 644 Week 1 DQ 2 Business Processes NEW
Week 1 DQ 2 Business Processes
Business Processes. Why are the following business
processes important? Which process do you feel is
most important? Explain your reasoning.
a. Strategy development
b. Product development
6. c. Systems to produce goods and services
d. Order fulfillment
Your initial post should include real life situations and
be at least 200-250 words.
7. ASH BUS 644 Week 1 Midas Case Study NEW
Check this A+ tutorial guideline at
http://www.uopassignments.com/bus-644-
ash/bus-644-week-1-midas-case-study-recent
For more classes visit
http://www.uopassignments.com/
BUS 644 Week 1 Midas Case Study NEW
Week 1 Midas
Midas. Read the “Midas” case study in Chapter 2 of
your text. Answer questions 1through 4 in a two- to-
four page paper in accordance with APA guidelines as
outlined in the Ashford Writing Center. Your paper
should be in paragraph form (avoid the use of bullet
points), and supported with the concepts outlined in
your text. Provide at least two scholarly sources from
the Ashford University Library or other external
sources, excluding the textbook. Do not include the
original questions of the assignment in the paper.
8. a. What are the anticipated impacts upon operating
efficiency? How would you attempt to minimize the
negative impacts?
b. Should some operating practices be changed to
accommodate the tune-ups?
c. Should input be gathered from the shop owners? If
so, what?
d. If Midas decides to launch this new program, how
should it begin?
Carefully review the Grading Rubric for the criteria
that will be used to evaluate your assignment.
9. ASH BUS BUS 644 Week 2 DQ 1 Productivity NEW
Check this A+ tutorial guideline at
http://www.uopassignments.com/bus-644-
ash/bus-644-week-2-dq-1-productivity-recent
For more classes visit
http://www.uopassignments.com/
BUS 644 Week 2 DQ 1 Productivity NEW
Week 2 DQ 1 Productivity
Productivity. Many times trade-offs are necessary to
increase productivity. What are important trades-offs
involving the inputs to productivity? Your initial post
should include real life situations and be at least 200-
250 words.
10. ASH BUS 644 Week 2 DQ 2 Product Design and
Quality NEW
Check this A+ tutorial guideline at
http://www.uopassignments.com/bus-644-
ash/bus-644-week-2-dq-2-product-design-
and-quality-recent
For more classes visit
http://www.uopassignments.com/
BUS 644 Week 2 DQ 2 Product Design and Quality
NEW
Week 2 DQ 2 Product Design and Quality
Product Design and Quality. What important
organizational activities enable a firm to build quality
into its products? Explain each of these along with its
benefits. Your initialpost should include examples and
be at least 200-250 words.
11. ASH BUS 644 Week 2 Memorial Hospital Case
Study NEW
Check this A+ tutorial guideline at
http://www.uopassignments.com/bus-644-
ash/bus-644-week-2-memorial-hospital-case-
study-recent
For more classes visit
http://www.uopassignments.com/
BUS 644 Week 2 Memorial Hospital Case Study NEW
Week 2 Memorial Hospital
Memorial Hospital. Read the “Memorial Hospital” case
study in Chapter 4 of your text. Answer questions 1- 4
in a two- to- four (2-4) page paper in accordance with
APA guidelines as outlined in the Ashford Writing
Center. Your paper should be in paragraph form
(avoid the use of bullet points), and supported with
the concepts outlined in your text. Provide at least two
scholarly sources from the Ashford University Library
or other external sources, excluding the textbook. Do
12. not include the original questions of the assignment in
the paper.
a. Discuss some ways that a hospital might measure
quality.
b. What are the potential costs of quality for Memorial
Hospital? How could the value of a human life be
included?
c. Are there any ideas or techniques from TQM that
Janice could use to help Memorial focus on providing
quality health care?
d. What measures could Memorial use to assess the
quality of health care it is providing?
Carefully review the Grading Rubric for the criteria
that will be used to evaluate your assignment
13. ASH BUS 644 Week 3 DQ 1 Suppliers NEW
Check this A+ tutorial guideline at
http://www.uopassignments.com/bus-644-
ash/bus-644-week-3-dq-1-suppliers-recent
For more classes visit
http://www.uopassignments.com/
BUS 644 Week 3 DQ 1 Suppliers NEW
Week 3 DQ 1 Suppliers
Suppliers. Should a firm attempt to have fewer or
more suppliers? What are the advantages and
disadvantages of each approach? Your initial post
should be 200-250 words.
14. ASH BUS 644 Week 3 DQ 2 Forecasting Methods
NEW
Check this A+ tutorial guideline at
http://www.uopassignments.com/bus-644-
ash/bus-644-week-3-dq-2-forecasting-
methods-new,bus-644-week-3-outsourcing-
recent
For more classes visit
http://www.uopassignments.com/
BUS 644 Week 3 DQ 2 Forecasting Methods NEW
Week 3 DQ 2 Forecasting Methods
Forecasting Methods. Read Problem 6 in Chapter 6 of
your textbook. Calculate and answer parts a through d.
Include all calculations and spreadsheets in your post.
Explain why the moving average method was used
instead of another forecasting method. What might be
another forecasting method that could prove to be just
as useful? Your initial post should be 200-250 words
15. ASH BUS 644 Week 3 Outsourcing NEW
Check this A+ tutorial guideline at
http://www.uopassignments.com/bus-644-
ash/bus-644-week-3-outsourcing-recent
For more classes visit
http://www.uopassignments.com/
BUS 644 Week 3 Outsourcing NEW
Week 3 Outsourcing
Outsourcing. Outsourcing, especially to low labor-cost
countries, has grown substantially. What are the
advantages and disadvantages of outsourcing? Include
and describe a product or service of a specific low
labor-cost country as an example. Include a
recommendation/conclusion based on the research.
16. Answer the question in a two to four (2-4) page in
accordance with APA guidelines as outlined in the
Ashford Writing Center. Provide at least two (2)
scholarly sources from the Ashford Library or other
external sources, excluding the textbook. Your paper
should be in paragraph form (avoid the use of bullet
points), and supported with the concepts outlined in
your text. Do not include the original questions of the
assignment in the paper.
Carefully review the Grading Rubric for the criteria
that will be used to evaluate your assignment.
17. ASH BUS 644 Week 4 Beck Manufacturing and
Plant Capacity NEW
Check this A+ tutorial guideline at
http://www.uopassignments.com/bus-644-
ash/bus-644-week-4-dq-1-process-selection-
product-design-and-capacity-recent
For more classes visit
http://www.uopassignments.com/
BUS 644 Week 4 DQ 1 Process Selection Product
Design and Capacity NEW
Week 4 DQ 1 Process Selection Product Design and
Capacity
Process Selection: Product Design and Capacity. How
is process selection related to product design and
capacity determination? Your initial post should be
200-25
18. ASH BUS 644 Week 4 Beck Manufacturing and
Plant Capacity NEW
Check this A+ tutorial guideline at
http://www.uopassignments.com/bus-644-
ash/bus-644-week-4-beck-manufacturing-
and-plant-capacity-recent
For more classes visit
http://www.uopassignments.com/
BUS 644 Week 4 Beck Manufacturing and Plant
Capacity NEW
Week 4 Beck Manufacturing and Plant Capacity
Beck Manufacturing and Plant Capacity. Read the
“Beck Manufacturing” case study in Chapter 8 of your
text. Answer questions one through three in a two- to-
four page paper in accordance with APA guidelines as
outlined in the Ashford Writing Center.
a. Calculate the capacity of each machine center and
the capacity of the system.
19. b. If Beck wants to expand capacity, where should he
focus the company’s efforts? How much extra capacity
can he get without causing another operation to
become the bottleneck?
c. How may Mr. Beck expand capacity without
purchasing new equipment? Be specific.
Your paper should be in paragraph form (avoid the
use of bullet points), and supported with any formulas,
calculations, and concepts outlined in your text. Do not
include the original questions of the assignment in the
paper.
Carefully review the Grading Rubric for the criteria
that will be used to evaluate your assignment.
20. ASH BUS 644 Week 4 DQ 2 Monique Food
Processing Company and Capacity NEW
Check this A+ tutorial guideline at
http://www.uopassignments.com/bus-644-
ash/bus-644-week-4-dq-2-monique-food-
processing-company-and-capacity-recent
For more classes visit
http://www.uopassignments.com/
BUS 644 Week 4 DQ 2 Monique Food Processing
Company and Capacity NEW
Week 4 DQ 2 Monique Food Processing Company and
Capacity
Monique Food Processing Company and Capacity.
Read Problem 6: The “Monique Food Processing
Company” in Chapter 8 of your text.
Monique Food Processing Company produces light
snacks that can be heated in a microwave. The
following steps are included in the process: Steps
23. ASH BUS 644 Week 5 Alliance Supermarket and
Point-of-Sale (POS) systems NEW
Check this A+ tutorial guideline at
http://www.uopassignments.com/bus-644-
ash/bus-644-week-5-dq-1-mrp-inventory-and-
customer-service-recent
For more classes visit
http://www.uopassignments.com/
BUS 644 Week 5 DQ 1 MRP Inventory and Customer
Service NEW
Week 5 DQ 1 MRP Inventory and Customer Service
Materials Requirements (MRP) Inventory and
Customer Service. Explain how MRP can decrease a
company’s inventory while improving its customer
service level. Include a real-life example. Your initial
post should be 200-250 words.
24. ASH BUS 644 Week 5 Alliance Supermarket and
Point-of-Sale (POS) systems NEW
Check this A+ tutorial guideline at
http://www.uopassignments.com/bus-644-
ash/bus-644-week-5-alliance-supermarket-
and-point-of-sale-pos-systems-recent
For more classes visit
http://www.uopassignments.com/
BUS 644 Week 5 Alliance Supermarket and Point-of-
Sale (POS) systems NEW
Week 5 Alliance Supermarket and Point-of-Sale (POS)
systems
Alliance Supermarket and Point-of-Sale (POS)
Systems. Read the “Alliance Supermarket” case study
in Chapter 10 of your text. In a two- to- four page
paper, answer questions 1 & 2 in accordance with APA
guidelines as outlined in the Ashford Writing Center.
Alliance Supermarkets
25. Alliance Supermarkets has been using a point-of-sale
(POS) system for some time to track its inventory. The
system uses a laser scanner to read the universal
product code (UPC) on each item at the checkout
container. The UPC is a number that uniquely
identifies the product on which it appears. Currently,
Alliance is using the UPC information to update
inventory records for each item. Although the system
has greatly improved the company’s ability to
replenish inventory promptly, the company still has
some problems. For example, sudden changes in
demand for a particular item can catch the company
by surprise as it bases inventory replenishment on
historical demand patterns. Further, demand patterns
and preferences may vary from one store to another
depending on the customers served by each, but the
inventory system groups all demand information
together and treat each store equally. Finally, the
manufacturers that make the products stocked by
Alliance Supermarkets are always pressuring Alliance
to help them target appropriate customers for special
promotions and sales.
26. The chief information officer (CIO) of Alliance realizes
that much more could probably be done with the data
collected from its POS system. For example, the
company could analyze the relationship between each
product’s sales and weather patterns. It is even
possible to analyze an individual customer’s buying
habits and identify instances when a customer may be
persuaded to try a different brand of a certain product.
Suppose you have been asked to study this situation
and suggest possible new and innovative uses for the
information generated by the POS system. Ideally,
these ideas should help Alliance better serve its
customers by ensuring that adequate quantities of
each item are available, that costs are kept low, and
that customers are made aware of new products that
may interest them.
a. What information may help Alliance reduce costs
while providing better service?
27. b. If purchase information can be obtained on
individual customers, what new approach could be
used by Alliance?
Your paper should be in paragraph form (avoid the
use of bullet points), and supported with the concepts
outlined in your text. Do not include the original
questions of the assignment in the paper.
Carefully review the Grading Rubric for the criteria
that will be used to evaluate your assignment.
28. ASH BUS 644 Week 5 DQ 2 Perpetual versus
Periodic Inventory Systems NEW
Model:Recent
Check this A+ tutorial guideline at
http://www.uopassignments.com/bus-644-
ash/bus-644-week-5-dq-2-perpetual-versus-
periodic-inventory-systems-recent
For more classes visit
http://www.uopassignments.com/
BUS 644 Week 5 DQ 2 Perpetual versus Periodic
Inventory Systems NEW
Week 5 DQ 2 Perpetual versus Periodic Inventory
Systems
Perpetual versus Periodic Inventory Systems. Describe
the perpetual and the periodic inventory systems.
How are they different? Are there circumstances in
which one system is better than the other? Include
real-life examples. Your initial post should be 200-250
words..
29. ASH BUS 644 Week 6 DQ 1 Just-in-Time (JIT)
Inventories NEW
Check this A+ tutorial guideline at
http://www.uopassignments.com/bus-644-
ash/bus-644-week-6-dq-1-just-in-time-
jitinventories-recent
For more classes visit
http://www.uopassignments.com/
BUS 644 Week 6 DQ 1 Just-in-Time (JIT) Inventories
NEW
Week 6 DQ 1 Just-in-Time (JIT) Inventories
Just-in-Time (JIT) Inventories. Choose companies or
industries for which JIT would be totally
inappropriate? Explain your reasoning with examples
in 200-250 words.
30. ASH BUS 644 Week 6 DQ 2 Scheduling Procedures
NEW
Check this A+ tutorial guideline at
http://www.uopassignments.com/bus-644-
ash/bus-644-week-6-dq-2-scheduling-
procedures-recent
For more classes visit
http://www.uopassignments.com/
BUS 644 Week 6 DQ 2 Scheduling Procedures NEW
Week 6 DQ 2 Scheduling Procedures
Scheduling Procedures. Categorize different
scheduling procedures for various types of service
operations, such as restaurants, hospitals, and airlines.
Your initial post should include explanations and
examples and be 200-250 words
31. BUS 644 Week 6 Final Paper (Space Age Furniture
Problem) NEW
Check this A+ tutorial guideline at
http://www.uopassignments.com/bus-644-
ash/bus-644-week-6-final-paper-space-age-
furniture-problem-recent
For ore classes visit
http://www.uopassignments.com/
BUS 644 Week 6 Final Paper (Space Age Furniture
Problem) NEW
Week 6 Final Paper
Focus of the Final Paper
Read the “Space Age Furniture Company” case study in
Chapter 9 of your text. Answer the following
questions: and include any MRP calculations.
32. 1. What options are open to Coral to address this
problem?
2. How would reducing the minimum quantity of
subassemblies help?
3. What are the costs of carrying excess items in
inventory at each stage?
4. What is the trade-off between overtime costs and
inventory costs?
5. Which type(s) of production processing – job shop,
batch, repetitive, or continuous – is the primary mode
of operation? Explain.
6. In what ways could management keep track of job
status and location during production?
33. 7. Can you suggest any changes that might be
beneficial to the company or add value for the
customer? What are they?
The purpose of the Final Case is for you to culminate
the learning achieved in the course by describing your
understanding and application of knowledge in the
field of operations management. The paper should
integrate Readings and Resources and class
discussions into work and life experiences. It may
include explanation and examples from previous
events as well as implications for future applications.
Guidelines for Writing the Final Paper BUS 644
BUS644 BUS-644
Readdress the concept and the experience with critical
thought. That is, what is your response to the content,
either positive or negative, and then defend your
position. If multiple options/alternatives/positions
34. are present and are being rejected you must also
defend the reasons for rejecting an option..