The document provides guidance on the electrical safety requirements for dwellings as outlined in Part P of Schedule 1 to the Building Regulations 2010. It covers the design, installation, inspection and certification of electrical work. Installers must provide certification to show that electrical work complies with the wiring regulations BS 7671. Homeowners should be provided with information on operating, maintaining and modifying the electrical installation safely.
This document provides guidance on meeting the ventilation requirements of the Building Regulations 2010 for England and Wales. It covers ventilation provisions for new dwellings, buildings other than dwellings, and work on existing buildings. The main changes from the 2006 edition include increased ventilation rates for tighter dwellings, larger passive stack ventilator diameters, and clarification of guidance for refurbishing kitchens and bathrooms in existing homes. Performance-based criteria and standards are referenced to help ensure adequate ventilation and indoor air quality.
Charter Communications is the fourth largest cable television operator in the United States, serving over 6 million customers across 11 regions. The company believes that cable broadband will be the primary means of delivering new services like video, data, and voice to homes and businesses. Charter aims to deliver the full potential of broadband and provide superior customer service. The company has grown through 32 acquisitions since 1994 and successfully integrates new systems by empowering local managers and improving technology and marketing.
1. The document discusses services to help companies export security systems to Russia by attending trade shows in Moscow.
2. It describes how their GSE platform identifies sales leads before, during, and after the show to arrange meetings and generate qualified leads for clients.
3. Clients provide information about their company and products, which the service uses to set up an online contact center, advertise to potential customers, and provide after-show reports and lists of qualified leads.
The documents discuss challenges facing the pharmaceutical industry, including reputation issues, pricing pressures, impending patents expiring, and an aging population in Europe putting pressure on healthcare systems. They also discuss the need for pharmaceutical companies to shift to a more customer-centric model focused on providing value to customers rather than just selling products, and for sales forces to have a deeper understanding of disease states and healthcare economics.
Netherlands to help promote Vietnam tourism image abroad. Sofitel Legend Metropole Hanoi won the PATA gold award 2010. Contest to seek new slogan for National Tourism Campaign. International Tourism Festival to be held with Hanoi’s millennial years. Vietnam Water Puppetry.....
La efectividad del marketing digital y el nuevo modelo de planificaciónIAB Colombia
- The document discusses different methods of advertising and how consumers receive information from various media sources.
- Television, recommendations from friends/family, and print catalogs/brochures are the most common ways consumers receive information, followed closely by internet sources and magazines.
- The internet is used daily by 87% of consumers for personal purposes and 91% use it for work/study purposes, showing it is now integrated into most people's daily media consumption.
KlikEyeDoc is an online platform that aims to connect optometrists across the United States. It facilitates alumni relations and provides continuing education resources to solve knowledge needs. Optometrists, faculty, researchers, and students can use the platform. Key features include promoting optometry practices, online profiles, job postings, group discussions, and a knowledge stream of educational content. The goal is to engage and improve the profession and career prospects of optometrists.
This document provides guidance on meeting the ventilation requirements of the Building Regulations 2010 for England and Wales. It covers ventilation provisions for new dwellings, buildings other than dwellings, and work on existing buildings. The main changes from the 2006 edition include increased ventilation rates for tighter dwellings, larger passive stack ventilator diameters, and clarification of guidance for refurbishing kitchens and bathrooms in existing homes. Performance-based criteria and standards are referenced to help ensure adequate ventilation and indoor air quality.
Charter Communications is the fourth largest cable television operator in the United States, serving over 6 million customers across 11 regions. The company believes that cable broadband will be the primary means of delivering new services like video, data, and voice to homes and businesses. Charter aims to deliver the full potential of broadband and provide superior customer service. The company has grown through 32 acquisitions since 1994 and successfully integrates new systems by empowering local managers and improving technology and marketing.
1. The document discusses services to help companies export security systems to Russia by attending trade shows in Moscow.
2. It describes how their GSE platform identifies sales leads before, during, and after the show to arrange meetings and generate qualified leads for clients.
3. Clients provide information about their company and products, which the service uses to set up an online contact center, advertise to potential customers, and provide after-show reports and lists of qualified leads.
The documents discuss challenges facing the pharmaceutical industry, including reputation issues, pricing pressures, impending patents expiring, and an aging population in Europe putting pressure on healthcare systems. They also discuss the need for pharmaceutical companies to shift to a more customer-centric model focused on providing value to customers rather than just selling products, and for sales forces to have a deeper understanding of disease states and healthcare economics.
Netherlands to help promote Vietnam tourism image abroad. Sofitel Legend Metropole Hanoi won the PATA gold award 2010. Contest to seek new slogan for National Tourism Campaign. International Tourism Festival to be held with Hanoi’s millennial years. Vietnam Water Puppetry.....
La efectividad del marketing digital y el nuevo modelo de planificaciónIAB Colombia
- The document discusses different methods of advertising and how consumers receive information from various media sources.
- Television, recommendations from friends/family, and print catalogs/brochures are the most common ways consumers receive information, followed closely by internet sources and magazines.
- The internet is used daily by 87% of consumers for personal purposes and 91% use it for work/study purposes, showing it is now integrated into most people's daily media consumption.
KlikEyeDoc is an online platform that aims to connect optometrists across the United States. It facilitates alumni relations and provides continuing education resources to solve knowledge needs. Optometrists, faculty, researchers, and students can use the platform. Key features include promoting optometry practices, online profiles, job postings, group discussions, and a knowledge stream of educational content. The goal is to engage and improve the profession and career prospects of optometrists.
The document summarizes the reopening of the Movenpick Hotel Saigon following a $15 million renovation. Key points include:
1) The renovation included updating each room, public spaces, restaurants, and retail outlets with a modern design incorporating local Vietnamese style.
2) Twenty-seven new rooms were added for a total of 278 rooms. New chefs have also revitalized the dining options.
3) Updates were made with business travelers in mind, including modern meeting spaces, a large wine selection, and high-speed internet access throughout the hotel.
Red River ceramic road recognized as Guinness World Record. HCMC expected to start development project of Waterway Tourism. Accor signs two new Pullman hotels in Vietnam. Dragon festival to mark 1,000th anniversary Of Thang Long-Hanoi. MITT Organisers Made a Decision Expected by the Market.....
This presentation discusses net neutrality and its importance. It begins by defining net neutrality as the principle that all Internet traffic should be treated equally. It then discusses issues such as whether Internet service providers could discriminate based on content type or charge more for certain content. The presentation also covers debates around whether regulation could encourage or discourage investment and innovation. Overall, it argues that how content is treated online could significantly impact the future of Internet services and their quality.
The document discusses business mobility and Nokia's business mobility solutions. It notes that 850 million people globally used mobile phones for business purposes in 2009, while only about 20 million used mobile email daily. The adoption of mobility solutions is well along, with factors like virtual workforces and disruptive technologies driving business needs for productivity and efficiency gains through mobility. Nokia provides business mobility solutions across planning, deployment, operations and optimization. It discusses Nokia phones, software and services that provide integrated mobility solutions for businesses.
Liaison Faculty09 - Research for NHS Clinicians [Workshop]Alex J Mitchell
This is a workshop from 19-Mar-09 presented at the Royal College of Psychiatrists Liaison Faculty AGM in Prague. It is aimed at helping NHS clinicians getting published and understanding the pitfalls in publishing. Includes an analysis of productivity by medical colleagues in liaison psychiatry annoymised in this version)
This document summarizes key findings from a ConsumerLab report about how teenagers in the US are using technology in their social lives. The report is based on surveys of nearly 2,000 teenagers and in-depth interviews. It finds that most teenagers own smartphones and use texting as their preferred method of communication, but still value face-to-face interaction. It also finds that social media platforms like Facebook are widely used but considered just a tool rather than a primary method of socializing. Video chat usage is growing year-over-year as well.
How teenagers are using technology in their social lives? - ConsumerLab EricssonEricsson France
Teenagers prefer face-to-face communication over technology-based communication. While texting is popular, teenagers say they would miss in-person interaction the most if it was taken away. Video chatting is increasing in popularity as a way to connect with friends both near and far. Though teenagers are highly active on Facebook, they see it as just another tool rather than a preferred method of communication. Their social needs center around feelings of belonging and significance, and they will continue adopting new tools that help fulfill these fundamental emotional needs.
Sic 'Em Services is a marketing agency specializing in tactical projects and strategic programs. They offer four packages: spikeBrand focuses on branding strategy and identity, spikeBuzz on awareness and social media, spikeLeads on generating interest through search and direct marketing, and spikeDemand on consideration and sales. Sic 'Em has worked with companies like McAfee, NComputing, Actiance, Highway to Havasu, McGraw Insurance, and Pacific Specialty Insurance.
This document summarizes strategies for increasing revenues from Materials Recovery Facilities (MRFs) presented at the 2012 County Forum on Innovative Waste Management. It discusses the evolution of MRFs and single-stream recycling, the importance of understanding commodity markets and the recyclables stream, and contracting strategies like revenue sharing models and long-term contracts. Key points emphasized include understanding the value of recyclables, tracking packaging trends, optimizing cart programs, and negotiating assertively but flexibly with MRF operators.
Golfplan has broken ground on the construction of an 18-hole golf course at the new Jeong San Vina Golf Club located on an island in the Saigon River between Ho Chi Minh City and its new international airport. The golf course will serve as the centerpiece of a high-end resort development project with a hotel and condominiums overlooking the course, river, and city. Course architects face unique challenges in developing the course due to strict limits on land elevation changes imposed by the area's high water table.
Social Media Speaker Dawn Raquel Jensen (@dawnrjensen) of Virtual Options Coaching and Training (@virtualoptions) speaking at the February 2013 meetings of the Rock Your Business CEO Roundtable Mastermind in Orlando and Tampa, FL. For more information about Dawn or social media and digital marketing resrouces, visit http://www.virtualoptions.net
This document provides assembly instructions and specifications for an agility web training aid. It includes diagrams showing how the double hinge snaps connect pieces together. Notes indicate the pieces should be stackable and rotate freely. A second page shows details for nylon webbing included in assembling a hurdle. Colors used on training products are also listed.
This is a 2-day practical workshop on social and mobile search marketing optimization to be held on August 22-23, 2011 in Singapore and August 25-26, 2011 in Hong Kong. The workshop will be led by an expert in search engine optimization and will provide actionable strategies for brand visibility, reputation management, and measuring the effectiveness of search engine marketing. Attendees will learn the latest trends in social media and mobile search and how to apply search marketing tactics through hands-on exercises and case studies.
This 2-day practical workshop on Social & Mobile Search Marketing aims to equip attendees with techniques to integrate social, mobile and search elements into SEO and overall marketing efforts to boost brand performance and ROI. Through hands-on sessions and case studies, attendees will learn how to optimize websites, campaigns, and conversions as well as apply analytics to monitor strategies. The workshop will be led by an expert in SEO with over 10 years of experience and will provide benefits such as identifying search trends, analyzing SEM adoption, and overcoming challenges to SEM implementation.
A presentation by David Wilson, Managing Director of Participate Technologies introducing clicker technology for teaching in today's educational environment. www.participate.co.za
The hospitality industry is leveraging social, local and mobile (SoLoMo) technologies to enrich the customer experience. Hotels are using mobile apps to allow customers to book rooms, access loyalty programs, search for recipes from executive chefs, and get recommendations for nearby places. They are also using Facebook for marketing campaigns, collecting customer stories, and running contests. Experience apps on iPads in hotel rooms provide integrated luxury experiences by controlling room settings and placing food orders. SoLoMo initiatives are spreading customer experiences and generating customer data to increase loyalty and promotions.
The document discusses new online design resources launched by RS Components to help engineers. It introduces Component Chooser, a new parametric search tool that allows intuitive searching and comparison of over 260,000 electronic components. It also discusses the availability of downloadable 3D CAD models of over 20,000 products. Finally, it mentions DesignSpark, a new website providing design tools, reviews and industry discussion to simplify and accelerate the design process.
The document discusses new additions to Tyco Electronics' line of wire-to-board terminal blocks. Specifically, new left and right hand plugs have been added that provide additional wire access angle configurations to complement existing 3.5mm and 3.81mm vertical and right angle headers. The plugs allow for multiple wire access angles when mated with 90° and 270° header interfaces. They are stackable without losing centerline spacing. The plugs are UL recognized and serve industrial control, communication equipment, and HVAC control markets. Custom marking and color options are also available.
The document summarizes the reopening of the Movenpick Hotel Saigon following a $15 million renovation. Key points include:
1) The renovation included updating each room, public spaces, restaurants, and retail outlets with a modern design incorporating local Vietnamese style.
2) Twenty-seven new rooms were added for a total of 278 rooms. New chefs have also revitalized the dining options.
3) Updates were made with business travelers in mind, including modern meeting spaces, a large wine selection, and high-speed internet access throughout the hotel.
Red River ceramic road recognized as Guinness World Record. HCMC expected to start development project of Waterway Tourism. Accor signs two new Pullman hotels in Vietnam. Dragon festival to mark 1,000th anniversary Of Thang Long-Hanoi. MITT Organisers Made a Decision Expected by the Market.....
This presentation discusses net neutrality and its importance. It begins by defining net neutrality as the principle that all Internet traffic should be treated equally. It then discusses issues such as whether Internet service providers could discriminate based on content type or charge more for certain content. The presentation also covers debates around whether regulation could encourage or discourage investment and innovation. Overall, it argues that how content is treated online could significantly impact the future of Internet services and their quality.
The document discusses business mobility and Nokia's business mobility solutions. It notes that 850 million people globally used mobile phones for business purposes in 2009, while only about 20 million used mobile email daily. The adoption of mobility solutions is well along, with factors like virtual workforces and disruptive technologies driving business needs for productivity and efficiency gains through mobility. Nokia provides business mobility solutions across planning, deployment, operations and optimization. It discusses Nokia phones, software and services that provide integrated mobility solutions for businesses.
Liaison Faculty09 - Research for NHS Clinicians [Workshop]Alex J Mitchell
This is a workshop from 19-Mar-09 presented at the Royal College of Psychiatrists Liaison Faculty AGM in Prague. It is aimed at helping NHS clinicians getting published and understanding the pitfalls in publishing. Includes an analysis of productivity by medical colleagues in liaison psychiatry annoymised in this version)
This document summarizes key findings from a ConsumerLab report about how teenagers in the US are using technology in their social lives. The report is based on surveys of nearly 2,000 teenagers and in-depth interviews. It finds that most teenagers own smartphones and use texting as their preferred method of communication, but still value face-to-face interaction. It also finds that social media platforms like Facebook are widely used but considered just a tool rather than a primary method of socializing. Video chat usage is growing year-over-year as well.
How teenagers are using technology in their social lives? - ConsumerLab EricssonEricsson France
Teenagers prefer face-to-face communication over technology-based communication. While texting is popular, teenagers say they would miss in-person interaction the most if it was taken away. Video chatting is increasing in popularity as a way to connect with friends both near and far. Though teenagers are highly active on Facebook, they see it as just another tool rather than a preferred method of communication. Their social needs center around feelings of belonging and significance, and they will continue adopting new tools that help fulfill these fundamental emotional needs.
Sic 'Em Services is a marketing agency specializing in tactical projects and strategic programs. They offer four packages: spikeBrand focuses on branding strategy and identity, spikeBuzz on awareness and social media, spikeLeads on generating interest through search and direct marketing, and spikeDemand on consideration and sales. Sic 'Em has worked with companies like McAfee, NComputing, Actiance, Highway to Havasu, McGraw Insurance, and Pacific Specialty Insurance.
This document summarizes strategies for increasing revenues from Materials Recovery Facilities (MRFs) presented at the 2012 County Forum on Innovative Waste Management. It discusses the evolution of MRFs and single-stream recycling, the importance of understanding commodity markets and the recyclables stream, and contracting strategies like revenue sharing models and long-term contracts. Key points emphasized include understanding the value of recyclables, tracking packaging trends, optimizing cart programs, and negotiating assertively but flexibly with MRF operators.
Golfplan has broken ground on the construction of an 18-hole golf course at the new Jeong San Vina Golf Club located on an island in the Saigon River between Ho Chi Minh City and its new international airport. The golf course will serve as the centerpiece of a high-end resort development project with a hotel and condominiums overlooking the course, river, and city. Course architects face unique challenges in developing the course due to strict limits on land elevation changes imposed by the area's high water table.
Social Media Speaker Dawn Raquel Jensen (@dawnrjensen) of Virtual Options Coaching and Training (@virtualoptions) speaking at the February 2013 meetings of the Rock Your Business CEO Roundtable Mastermind in Orlando and Tampa, FL. For more information about Dawn or social media and digital marketing resrouces, visit http://www.virtualoptions.net
This document provides assembly instructions and specifications for an agility web training aid. It includes diagrams showing how the double hinge snaps connect pieces together. Notes indicate the pieces should be stackable and rotate freely. A second page shows details for nylon webbing included in assembling a hurdle. Colors used on training products are also listed.
This is a 2-day practical workshop on social and mobile search marketing optimization to be held on August 22-23, 2011 in Singapore and August 25-26, 2011 in Hong Kong. The workshop will be led by an expert in search engine optimization and will provide actionable strategies for brand visibility, reputation management, and measuring the effectiveness of search engine marketing. Attendees will learn the latest trends in social media and mobile search and how to apply search marketing tactics through hands-on exercises and case studies.
This 2-day practical workshop on Social & Mobile Search Marketing aims to equip attendees with techniques to integrate social, mobile and search elements into SEO and overall marketing efforts to boost brand performance and ROI. Through hands-on sessions and case studies, attendees will learn how to optimize websites, campaigns, and conversions as well as apply analytics to monitor strategies. The workshop will be led by an expert in SEO with over 10 years of experience and will provide benefits such as identifying search trends, analyzing SEM adoption, and overcoming challenges to SEM implementation.
A presentation by David Wilson, Managing Director of Participate Technologies introducing clicker technology for teaching in today's educational environment. www.participate.co.za
The hospitality industry is leveraging social, local and mobile (SoLoMo) technologies to enrich the customer experience. Hotels are using mobile apps to allow customers to book rooms, access loyalty programs, search for recipes from executive chefs, and get recommendations for nearby places. They are also using Facebook for marketing campaigns, collecting customer stories, and running contests. Experience apps on iPads in hotel rooms provide integrated luxury experiences by controlling room settings and placing food orders. SoLoMo initiatives are spreading customer experiences and generating customer data to increase loyalty and promotions.
The document discusses new online design resources launched by RS Components to help engineers. It introduces Component Chooser, a new parametric search tool that allows intuitive searching and comparison of over 260,000 electronic components. It also discusses the availability of downloadable 3D CAD models of over 20,000 products. Finally, it mentions DesignSpark, a new website providing design tools, reviews and industry discussion to simplify and accelerate the design process.
The document discusses new additions to Tyco Electronics' line of wire-to-board terminal blocks. Specifically, new left and right hand plugs have been added that provide additional wire access angle configurations to complement existing 3.5mm and 3.81mm vertical and right angle headers. The plugs allow for multiple wire access angles when mated with 90° and 270° header interfaces. They are stackable without losing centerline spacing. The plugs are UL recognized and serve industrial control, communication equipment, and HVAC control markets. Custom marking and color options are also available.
Thaweesak Koanantakool presented on bringing about a broadband future for Thailand. He discussed Thailand's broadband goals of ensuring universal access and affordable, high-quality broadband by 2020. However, there are challenges to overcome, including resolving the country's entangled regulatory environment with mobile concessions, upgrading infrastructure like deploying fiber networks, and addressing regulatory issues to promote competition. Bridging the digital divide by expanding broadband access in rural areas through wireless and other technologies is also a priority to achieve Thailand's national broadband goals.
XConnect is a global leader in IP Federations, providing ENUM registries and SIP-based peering services to enable seamless routing between IP networks. It operates the world's largest number of federations across segments including global, national, UC enterprise, and video. XConnect's patented technology addresses challenges of IP interconnect through configurable policy control and support for voice, video, and other multimedia services. With ongoing growth of IP communications including VoIP, video, and UC, XConnect is well positioned for continued expansion through its global multi-federation strategy and ability to enable new services.
- MeadWestvaco reported earnings results for the first quarter of 2009, with lower operating results reflecting weaker demand due to the challenging global economic environment.
- The company is executing strategies to significantly improve its business model and expects to achieve $125 million in savings for 2009 through actions like job cuts and manufacturing closures.
- Actions are helping maximize performance and maintain financial strength during this difficult period, as evidenced by a doubling of cash from operations to $90 million in Q1 2009.
The document contains contact information for bicycle parts distributors around the world. It lists the company name, phone number, email, website, and address for distributors in 27 countries ranging from Argentina to Thailand. It also includes images and specifications for 5 different stem models from PZ Racing, including details on material, extension length, bar bore diameter, angle, height, and weight.
Advertisment for fga recycle auction15 septAnna Fischer
The document announces an auction being held on September 15, 2012 at Fort Greely, Alaska to sell recycled and salvaged materials. The auction will begin at 9:00 am with early viewing at 8:00 am. All items must be paid for by check and removed by September 20th. A forklift will be available to help load heavy items. The document provides the auction schedule and lists items for sale including doors, sinks, fencing, cabinets, appliances, and scrap materials.
This document appears to be a design portfolio or website for Rijkhof Design, a packaging design company located in Indiana. It includes images and descriptions of some of their client projects, which include designs for coffee packaging, sports wraps, and other consumer products. The document promotes Rijkhof Design's services and capabilities in building brands through innovative packaging design.
Latest Borrell media panel from Q3 2009 reflecting panel\'s views on changing media environment and channels--bleak outlook on phone directories while mobile applications and Google continue strong.
This document provides instructions and specifications for an EasyWalker brand baby stroller. It lists technical details like approved safety standards, maximum weight capacities, and dimensions for the stroller base, seat unit, and carrycot. Contact information is also provided for the manufacturer and distributor.
The document provides a 3 paragraph summary of the Costa Brava region of Catalonia, Spain. It begins by describing the Costa Brava as one of Spain's major coastal tourist destinations, though it also notes there is dreary mass tourism in places and highlights the wild natural beauty that originally drew visitors. The second paragraph discusses attractions just inland like the medieval cities of Girona and Figueres, home to the Teatre-Museu Dalí museum. It also summarizes the Pyrenees mountains that run across the north of the region, describing the remote valleys and villages. The final paragraph briefly touches on less exciting areas in the far west and south but says there is still enough to explore for days, ranging from
The Art of the Bootstrap - Atlassian Starter Day 2010Atlassian
Atlassian started in a garage in Australia in 2002 and has grown to over $60 million in revenue after 8 years. The founders, Mike Cannon-Brookes and Scott Farquhar, bootstrapped the company through careful financial planning and using their product themselves. Their model involved selling software at an affordable price globally to gain thousands of customers and allowing the product to market itself through its usefulness.
You may be stressed about revealing your cancer diagnosis to your child or children.
Children love stories and these often provide parents with a means of broaching tricky subjects and so the ‘The Secret Warrior’ book was especially written for CANSA TLC, by creative writer and social worker, Sally Ann Carter.
Find out more:
https://cansa.org.za/resources-to-help-share-a-parent-or-loved-ones-cancer-diagnosis-with-a-child/
Understanding of Self - Applied Social Psychology - Psychology SuperNotesPsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
As we navigate through the ebbs and flows of life, it is natural to experience moments of low motivation and dwindling passion for our goals.
However, it is important to remember that this is a common hurdle that can be overcome with the right strategies in place.
In this guide, we will explore ways to rekindle the fire within you and stay motivated towards your aspirations.
ProSocial Behaviour - Applied Social Psychology - Psychology SuperNotesPsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
Procrastination is a common challenge that many individuals face when it comes to completing tasks and achieving goals. It can hinder productivity and lead to feelings of stress and frustration.
However, with the right strategies and mindset, it is possible to overcome procrastination and increase productivity.
In this article, we will explore the causes of procrastination, how to recognize the signs of procrastination in oneself, and effective strategies for overcoming procrastination and boosting productivity.
Aggression - Applied Social Psychology - Psychology SuperNotesPsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
2. ONLINE VERSION
Main changes made by the APPROVED DOCUMENTS
2010 amendments The following documents have been approved Approved Document K: Protection from falling
and issued by the First Secretary of State for the collision and impact
This 2006 edition incorporating 2010 amendments 1998 edition incorporating 2000 and 2010
purpose of providing practical guidance with
reflects the changes made as a result of the amendments
Building Regulations 2010 and Building (Approved respect to the requirements of the Building
inspector etc) Regulations 2010. The changes Regulations 2010. Approved Document L1A: Conservation of
mainly reflect regulation number changes as Approved Document A: Structure fuel and power – New dwellings
a result of re-ordering. There have been no 2004 edition incorporating 2010 amendments 2010 edition incorporating further 2010 amendments
amendments to the substantive requirements Approved Document L1B: Conservation of
in Schedule 1 (i.e. Parts A to P) of the Building Approved Document B (Fire safety) – Volume
1: Dwellinghouses fuel and power – Existing dwellings
Regulations.
2006 edition incorporating 2010 amendments 2010 edition incorporating further 2010 and 2011
Please note the simplification of the definition of amendments
‘room for residential purposes’ in regulation 2 of Approved Document B (Fire safety) – Volume
the Building Regulations 2010. Please also note 2: Buildings other than dwellinghouses Approved Document L2A: Conservation of
that L1(c) has now become regulation 40. 2006 edition incorporating 2007 and 2010 fuel and power – New buildings other than
amendments dwellings
2010 edition incorporating further 2010 amendments
Approved Document C: Site preparation and
resistance to contaminants and moisture Approved Document L2B: Conservation of
2004 edition incorporating 2010 amendments fuel and power – Existing buildings other than
dwellings
Approved Document D: Toxic substances 2010 edition incorporating further 2010 and 2011
1992 edition incorporating 2002 and 2010 amendments
amendments
Approved Document M: Access to and use of
Approved Document E: Resistance to the buildings
passage of sound 2004 edition incorporating 2010 amendments
2003 edition incorporating 2004 and 2010
amendments Approved Document N: Glazing – safety in
relation to impact, opening and cleaning
Approved Document F: Ventilation 1998 edition incorporating 2000 and 2010
2010 edition incorporating further 2010 amendments amendments
Approved Document G: Sanitation, hot water Approved Document P: Electrical safety –
safety and water efficiency Dwellings
2010 edition incorporating further 2010 amendments 2006 edition incorporating 2010 amendments
Approved Document H: Drainage and waste Approved Document to support regulation 7:
disposal Materials and workmanship
2002 edition incorporating 2010 amendments 1999 edition incorporating 2010 amendments
Approved Document J: Combustion
appliances and fuel storage systems
2010 edition incorporating further 2010 amendments
ONLINE VERSION
3. ONLINE VERSION P
Contents
PAGE PAGE
Use of guidance 3 Section 2: Material alterations and
material changes of use 13
The Approved Documents 3
Limitation on requirements 3 Section 3: Information about
other legislation 14
Materials and workmanship 3
Electricity at Work Regulations 1989 14
Mixed use development 4
Electricity Safety, Quality and Continuity
The Workplace (Health, Safety and Welfare)
Regulations 2002 14
Regulations 1992 4
Functionality requirements 14
The Requirements 5
Appendix A: Examples of electrical
Section 0: General guidance 7 installation diagrams 15
Performance 7
Appendix B: Copies of BS 7671
General 7 and IEE model forms 20
Definitions 7
Appendix C: Older practice that can be
Other regulations 7 encountered in alteration work 35
Notification of work 7
Appendix D: New harmonised cable
identification colours 40
Section 1: Design, installation,
inspection and testing, and provision
Appendix E: Competent person
of information 10
self-certification schemes 41
General 10
Standards referred to 42
Design and construction 10
General 10 Other publications referred to 43
Protection against flooding 10
Accessibility 10
Inspection and testing before taking
into service 10
General 10
BS 7671 certificates for all
electrical work 10
Building Regulations compliance
certificates/final notices for
notifiable work 11
Certification of notifiable work 11
a. Where the installer is registered
with a Part P competent person
self-certification scheme 11
b. Where the installer is not registered
with a Part P competent person
scheme but qualified to complete
BS 7671 certificates 11
c. Where installers are not qualified
to complete BS 7671 certificates 11
Third party certification 12
Inspection and testing of
non-notifiable work 12
Provision of information 12
Approved Document P Electrical safety – dwellings
ONLINE VERSION 1
5. ONLINE VERSION P
Use of guidance
THE APPROVED DOCUMENTS LIMITATION ON REQUIREMENTS
This document is one of a series that has been In accordance with regulation 8, the requirements
approved and issued by the Secretary of State in Parts A to D, F to K, N and P (except for
for the purpose of providing practical guidance paragraphs H2 and J7) of Schedule 1 to the
with respect to the requirements of Schedule 1 Building Regulations do not require anything
to and regulation 7 of the Building Regulations to be done except for the purpose of securing
2010 (SI 2010/2214) for England and Wales. reasonable standards of health and safety for
persons in or about buildings (and any others
At the back of this document is a list of all the
who may be affected by buildings or matters
documents that have been approved and issued
connected with buildings). This is one of the
by the Secretary of State for this purpose.
categories of purpose for which Building
Approved Documents are intended to provide Regulations may be made.
guidance for some of the more common building
Paragraphs H2 and J7 are excluded from
situations. However, there may well be alternative
regulation 8 because they deal directly with
ways of achieving compliance with the
prevention of the contamination of water. Parts E
requirements. Thus there is no obligation to
and M (which deal, respectively, with resistance
adopt any particular solution contained in an
to the passage of sound, and access to and use
Approved Document if you prefer to meet the
of buildings) are excluded from regulation 8
relevant requirement in some other way.
because they address the welfare and convenience
of building users. Part L is excluded from
Supplementary guidance regulation 8 because it addresses the conservation
The Office of the Deputy Prime Minister of fuel and power. All these matters are amongst
occasionally issues additional material to aid the purposes, other than health and safety, that
interpretation of the guidance contained in may be addressed by Building Regulations.
Approved Documents. This material may be
conveyed in official letters to Chief Executives of
Local Authorities and Approved Inspectors and/
MATERIALS AND WORKMANSHIP
or posted on the websites accessed through: Any building work which is subject to the
http://www.odpm.gov.uk/building-regulations. requirements imposed by Schedule 1 to the
Building Regulations should, in accordance with
Other requirements regulation 7, be carried out with proper materials
and in a workmanlike manner.
The guidance contained in an Approved Document
relates only to the particular requirements of the You may show that you have complied with
Regulations which the document addresses. The regulation 7 in a number of ways. These include
building work will also have to comply with any the appropriate use of a product bearing CE
other relevant requirements in Schedule 1 to the marking in accordance with the Construction
Regulations. Products Directive (89/106/EEC)1, the Low
Voltage Directive (73/23/EEC and amendment
There are Approved Documents which give 93/68/EEC)2 and the EMC Directive (89/336/
guidance on each of the Parts of Schedule 1 EEC)3, as amended by the CE marking Directive
and on Regulation 7. (93/68/EEC)4, or a product complying with an
appropriate technical specification (as defined
in those Directives), a British Standard, or an
alternative national technical specification of
any state which is a contracting party to the
European Economic Area which, in use, is
equivalent, or a product covered by a national
or European certificate issued by a European
Technical Approval issuing body, and the
conditions of use are in accordance with the
terms of the certificate. You will find further
guidance in the Approved Document supporting
regulation 7 on materials and workmanship.
1
As implemented by the Construction Products Regulations 1991
(SI 1620/1991).
2
As implemented by the Electrical Equipment (Safety) Regulations 1994
(SI 3260/1994).
3
As implemented by the Electromagnetic Compatibility Regulations 1992
(SI 2372/1992).
4
As implemented by the Construction Products (Amendment) Regulations
1994 (SI 3051/1994) and the Electromagnetic Compatibility
(Amendment) Regulations 1994 (SI 3080/1994).
Approved Document P Electrical safety – dwellings
ONLINE VERSION 3
6. P USE OF GUIDANCE L I N E
ON VERSION
Independent certification schemes THE WORKPLACE (HEALTH,
There are many UK product certification schemes. SAFETY AND WELFARE)
Such schemes certify compliance with the
requirements of a recognised document which is REGULATIONS 1992
appropriate to the purpose for which the material The Workplace (Health, Safety and Welfare)
is to be used. Materials which are not so certified Regulations 1992 as amended contain some
may still conform to a relevant standard. requirements which affect building design.
Many certification bodies which approve such The main requirements are now covered by the
schemes are accredited by UKAS. Building Regulations, but for further information
see: Workplace health, safety and welfare:
Technical specifications Workplace (Health, Safety and Welfare) Regulations
1992, Approved Code of Practice, L24, HMSO,
Under section 1(1) of the Building Act 1984, 1992 (ISBN 0 71760 413 6).
Building Regulations may be made for various
purposes including health, safety, welfare, The Workplace (Health, Safety and Welfare)
convenience, conservation of fuel and power and Regulations 1992 apply to the common parts
prevention of waste or contamination of water, of flats and similar buildings if people such as
furthering the protection or enhancement of the cleaners and caretakers are employed to work
environment, facilitating sustainable development in these common parts. Where the requirements
or the prevention and detection of crime. Standards of the Building Regulations that are covered by
and technical approvals are relevant guidance to this Part do not apply to buildings other than
the extent that they relate to these considerations. dwellings, the provisions may still be required in
However, they may also address other aspects the situations described above in order to satisfy
of performance such as serviceability, or aspects the Workplace Regulations.
which, although they relate to the purposes listed
above, are not covered by the current Regulations.
When an Approved Document makes reference
to a named standard, the relevant version of
the standard is the one listed at the end of the
publication. However, if this version has been
revised or updated by the issuing standards
body, the new version may be used as a source
of guidance provided it continues to address the
relevant requirements of the Regulations.
The appropriate use of a product which complies
with a European Technical Approval as defined in
the Construction Products Directive will meet the
relevant requirements.
The Office intends to issue periodic amendments
to its Approved Documents to reflect emerging
harmonised European Standards. Where a national
standard is to be replaced by a European
harmonised standard, there will be a co-existence
period during which either standard may be
referred to. At the end of the co-existence period
the national standard will be withdrawn.
MIXED USE DEVELOPMENT
In mixed use developments part of a building
may be used as a dwelling while another part
has a non-domestic use. In such cases, if the
requirements of the Regulations for dwellings
and non-domestic use differ, the requirements
for non-domestic use should apply in any shared
parts of the building.
Electrical safety – dwellings Approved Document P
4
ONLINE VERSION
7. ELECTRICAL SAFETYN L I N E
O VERSION P
The Requirements
This Approved Document took effect on 6 April
2006. It deals with the requirements of Part P
of Schedule 1 to the Building Regulations 2010.
Requirement Limits on application
PART P ELECTRICAL SAFETY
Design and installation The requirements of this part apply only to electrical installations
that are intended to operate at low or extra-low voltage and are:
P1. Reasonable provision shall be made in the design and
installation of electrical installations in order to protect persons (a) in or attached to a dwelling;
operating, maintaining or altering the installations from fire
(b) in the common parts of a building serving one or more
or injury.
dwellings, but excluding power supplies to lifts;
(c) in a building that receives its electricity from a source
located within or shared with a dwelling; or
(d) in a garden or in or on land associated with a building
where the electricity is from a source located within or shared
with a dwelling.
NOTES
Examples of application of Part P Interaction with other Parts of the
Part P applies to electrical installations in or Building Regulations
attached to buildings or parts of buildings Other Parts of Schedule 1 to the Building
comprising: Regulations contain requirements affecting
• dwelling houses and flats; electrical installations. Examples include, but
are not limited to:
• dwellings and business premises that have
a common supply – for example shops and • Part A (Structure): depth of chases in walls,
public houses with a flat above; and size of holes and notches in floor and
roof joists;
• common access areas in blocks of flats such
as corridors and staircases; • Part B (Fire safety): fire safety of certain
electrical installations; provision of fire alarm
• shared amenities of blocks of flats such as and fire detection systems; fire resistance of
laundries and gymnasiums. penetrations through floors and walls;
Part P applies also to parts of the above • Part C (Site preparation and resistance to
electrical installations: moisture): moisture resistance of cable
• in or on land associated with the buildings – penetrations through external walls;
for example Part P applies to fixed lighting • Part E (Resistance to the passage of sound):
and pond pumps in gardens; penetrations through floors and walls;
• in outbuildings such as sheds, detached • Part L (Conservation of fuel and power):
garages and greenhouses. energy efficient lighting; reduced current-
carrying capacity of cables in insulation;
Approved Document P Electrical safety – dwellings
ONLINE VERSION 5
8. P ELECTRICAL SAFETY I N E
ONL VERSION
• Part M (Access to and use of buildings):
height of socket outlets, switches and
.
consumer units.
Further guidance is available in:
• the Electrician’s guide to the Building
Regulations, published by the IEE (Institution
of Electrical Engineers), available from
www.iee.org
• the Electrical Installers’ Guide to the Building
Regulations published by the NICEIC Group
Limited and the ECA (Electrical Contractors’
Association), available from www.niceic.org.uk
or www.eca.co.uk.
Regulation 4(3) states that, on completion of
electrical installation work, the building (and parts
of the electrical installations in the building that
were not the subject of work) should be no worse
in terms of the level of compliance with the other
applicable Parts of Schedule 1 to the Building
Regulations than before the work was undertaken.
For example, one or more perforations of a ceiling
lining beneath a floor – made to accommodate
recessed lighting or similar fittings – may have an
adverse effect on that floor’s performance in terms
of its resistance to fire and sound penetration. Due
regard should therefore be paid to the guidance in
Approved Documents B and E on the performance
of compartment floors.
Regulation 4(3) also means that, when extending
or altering an installation, only the new work
must meet current requirements and there is no
obligation to upgrade the existing installation
unless the new work would adversely affect the
safety of the existing installation, or the state of
the existing installation was such that the new
work could not be operated safely, or where there
is a requirement to upgrade imposed by the
energy efficiency requirements of the Building
Regulations.
Electrical safety – dwellings Approved Document P
6
ONLINE VERSION
9. ONLINE VERSION P
Section 0: General guidance
Performance Kitchen is defined in the Building Regulations as
‘a room or part of a room which contains a sink
0.1 In the Secretary of State’s view, the and food preparation facilities’.
requirements will be met by adherence to the
‘Fundamental Principles’ for achieving safety given As a guide only, in open plan areas the zone of
in BS 7671:2001 Chapter 13. To achieve these a kitchen may be considered to extend from
requirements electrical installations must be: the edge of the sink to a distance of 3m or to
a nearer dividing wall.
a. designed and installed to afford appropriate
protection against mechanical and thermal Other Regulations
damage, and so that they do not present
electric shock and fire hazards to people; 0.5 Electrical work is also affected by the
Electricity at Work Regulations 1989 as amended
b. suitably inspected and tested to verify that and the Electricity Safety, Quality and Continuity
they meet the relevant equipment and Regulations 2002 as amended, as described in
installation standards. paragraphs 3.1 to 3.13.
General Notification of work
0.2 A way of satisfying the fundamental
principles would be to follow: When necessary to involve building
control bodies
a. the technical rules described in the body
of BS 7671:2001 as amended or in an 0.6 Except in the circumstances outlined in
equivalent standard approved by a member paragraph 0.7 below, notification of proposals to
of the EEA; and carry out electrical installation work must be given
to a building control body (the local authority or
b. guidance given in installation manuals that an approved inspector) before work begins.
are consistent with BS 7671:2001, such as:
When not necessary to involve building
i. the IEE (Institution of Electrical Engineers) control bodies
On-Site Guide;
0.7 It is not necessary to give prior notification
ii. the series of IEE Publications, Guidance of proposals to carry out electrical installation
Notes Nos 1 to 7. work to building control bodies in the following
0.3 The diagrams in Appendix A give an circumstances:
indication of the sorts of electrical services a. The proposed installation work is undertaken
encountered in dwellings, some of the ways by a person registered with an electrical self-
they can be connected and the complexity of certification scheme prescribed in regulations
the wiring and protective systems necessary (see schedule 3 of the Regulations). In these
to supply them. They are not an indication cases the person is responsible for ensuring
of the scope of Part P and must not be used compliance with BS 7671:2001 or an
for installation purposes. equivalent standard and all relevant building
regulations requirements. A full list of schemes
Definitions with contact details is given in Appendix E.
0.4 The following meanings apply throughout OR
this document:
b. The proposed electrical installation work is
Electrical installation is defined in the Building non-notifiable work of the type described in
Regulations as fixed electrical cables or fixed Table 1 and does not include the provision of
electrical equipment located on the consumer’s a new circuit (see schedule 4 of the
side of the electricity supply meter. Regulations).
Extra-low voltage is defined in the Building
Regulations as voltage not exceeding 50 volts
between conductors and earth for alternating
current or 120 volts between conductors for
direct current.
Low voltage which normally exceeds extra-low
voltage is defined in the Building Regulations as
not exceeding 1000 volts between conductors or
600 volts between conductors and earth for
alternating current; or 1500 volts between
conductors or 900 volts between conductors and
earth for direct current.
Approved Document P Electrical safety – dwellings
ONLINE VERSION 7
10. P GENERAL GUIDANCE I N E
ONL VERSION
Table 1 Work that need not be notified to building control bodies
Work consisting of:
Replacing any fixed electrical equipment (for example, socket-outlets, control switches and ceiling roses) which does not include the
provision of any new fixed cabling
Replacing the cable for a single circuit only, where damaged, for example, by fire, rodent or impact (a)
Re-fixing or replacing the enclosures of existing installation components (b)
Providing mechanical protection to existing fixed installations (c)
Installing or upgrading main or supplementary equipotential bonding (d)
Work that is not in a kitchen or special location and does not involve a special installation (e) and consists of:
Adding lighting points (light fittings and switches) to an existing circuit (f)
Adding socket-outlets and fused spurs to an existing ring or radial circuit (f)
Work not in a special location, on:
Telephone or extra-low voltage wiring and equipment for the purposes of communications, information technology, signalling, control
and similar purposes
Prefabricated equipment sets and associated flexible leads with integral plug and socket connections
Notes:
(a) On condition that the replacement cable has the same current-carrying capacity and follows the same route.
(b) If the circuit’s protective measures are unaffected.
(c) If the circuit’s protective measures and current-carrying capacity of conductors are unaffected by increased thermal insulation.
(d) Such work will need to comply with other applicable legislation, such as the Gas Safety (Installation and Use) Regulations.
(e) Special locations and installations are listed in Table 2.
(f) Only if the existing circuit protective device is suitable and provides protection for the modified circuit, and other relevant safety provisions are
satisfactory.
Table 2 Special locations and installations(a)
Special locations
Locations containing a bath tub or shower basin
Swimming pools or paddling pools
Hot air saunas
Special installations
Electric floor or ceiling heating systems
Outdoor lighting or power installations
Solar photovoltaic (PV) power supply systems
Small scale generators such as microCHP units
Extra-low voltage lighting installations, other than pre-assembled, CE-marked lighting sets
Note:
(a) See IEE Guidance Note 7 which gives more guidance on achieving safe installations where risks to people are greater.
Additional notes c. Consumer unit replacements are, however,
notifiable.
Tables 1 and 2 above give the general rules for
determining whether or not electrical installation d. In large bathrooms, the location containing
work is notifiable. The rules are based on the risk a bath or shower is defined by the walls of
of fire and injury and what is practicable. The the bathroom.
following notes provide additional guidance and e. Conservatories and attached garages are not
specific examples: special locations. Work in them is therefore
a. Notifiable jobs include new circuits back to not notifiable unless it involves the installation
the consumer unit, and extensions to circuits of a new circuit or the extension of a circuit in
in kitchens and special locations (bathrooms, a kitchen or special location or associated
etc) and associated with special installations with a special installation.
(garden lighting and power installations, etc). f. Detached garages and sheds are not special
b. Replacement, repair and maintenance jobs locations. Work within them is notifiable only
are generally not notifiable, even if carried out if it involves new outdoor wiring.
in a kitchen or special location or associated
with a special installation.
Electrical safety – dwellings Approved Document P
8
ONLINE VERSION
11. GENERAL GUIDANCE L I N E
ON VERSION P
g. Outdoor lighting and power installations are
special installations. Any new work in, for
example, the garden or that involves crossing
the garden is notifiable.
h. The installation of fixed equipment is within
the scope of Part P, even where the final
connection is by a 13A plug and socket.
However, work is notifiable only if it involves
fixed wiring and the installation of a new
circuit or the extension of a circuit in a kitchen
or special location or associated with a
special installation.
i. The installation of equipment attached to the
outside wall of a house (for example security
lighting, air conditioning equipment and radon
fans) is not notifiable provided that there are
no exposed outdoor connections and the
work does not involve the installation of a
new circuit or the extension of a circuit in a
kitchen or special location or associated with
a special installation.
j. The installation of a socket outlet on an
external wall is notifiable, since the socket-
outlet is an outdoor connector that could be
connected to cables that cross the garden
and requires RCD protection.
k. The installation of prefabricated, “modular”
systems (for example kitchen lighting systems
and armoured garden cabling) linked by plug
and socket connectors is not notifiable,
provided that products are CE-marked and
that any final connections in kitchens and
special locations are made to existing
connection units or points (possibly a 13A
socket outlet).
l. Work to connect an electric gate or garage
door to an existing isolator is not notifiable,
but installation of the circuit up to the isolator
is notifiable.
m. The fitting and replacement of cookers and
electric showers is not notifiable unless a new
circuit is needed.
n. New central heating control wiring installations
are notifiable even where work in kitchens
and bathrooms is avoided.
Approved Document P Electrical safety – dwellings
ONLINE VERSION 9
12. P ONLINE VERSION
Section 1: Design, installation, inspection
and testing, and provision of information
General BS 7671 installation certificates
1.1 Where electrical installation work is to be 1.8 In general, compliance with Part P can be
carried out professionally, compliance is necessary demonstrated by the issue of the appropriate
with the Electricity at Work Regulations 1989 as BS 7671 electrical installation certificate.
amended. 1.9 Inspection and testing should be carried
1.2 In accordance with the Electricity Safety, out to follow the procedures in Chapters 71 and
Quality and Continuity Regulations 2002 and the 74 of BS 7671:2001, and a copy of the appropriate
contract for a mains supply, proposals for new installation certificate should be supplied to the
installations of a mains supply or significant person ordering the work. The electrical installation
alterations to an existing mains supply must certificate must be made out and signed only by
be agreed with the electricity distributor. someone “qualified” to do so. Where this is the
case, a safety certificate should be issued for all
Design and installation but the simplest of like-for-like replacements.
1.10 “Qualified” in this context means having
General the appropriate qualifications, knowledge and
1.3 Electrical installations should be designed experience to carry out the inspection and testing
and constructed, suitably enclosed and separated procedures and complete the relevant electrical
by appropriate distances to provide mechanical installation certificate.
and thermal protection, so that they afford 1.11 The certificate should show that the
appropriate protection for persons against the electrical installation work has been:
risks of electric shock, burn or fire injuries.
a. Inspected appropriately during erection as
1.4 A way of complying is to follow the well as on completion to verify that the
technical rules in BS 7671:2001 as amended components are:
or an equivalent standard.
i. made in compliance with appropriate
Protection against flooding British Standards or harmonised
1.5 The Electricity Safety, Quality and Continuity European Standards;
Regulations 2002 require the electricity distributor ii. selected and installed in accordance with
to install the cut-out and meter in a safe location, BS 7671:2001 (including consideration of
where they are mechanically protected and can external influences such as the presence
be safely maintained. In compliance with this of moisture);
requirement, the electricity distributor and installer
may be required to take into account the risk of iii. not visibly damaged or defective so as to
flooding. Some guidance is given in the ODPM be unsafe.
publication Preparing for floods, available from b. Tested appropriately to check satisfactory
www.communities.gov.uk. performance in relation to continuity of
conductors, insulation resistance, separation
Accessibility of circuits, polarity, earthing and bonding
1.6 Wall-mounted socket-outlets, switches arrangements, earth fault loop impedance and
and consumer units should be located so that functionality of all protective devices including
they are easily reachable where this is necessary residual current devices. It is not necessary to
to comply with Part M of the Building Regulations. carry out all these tests for each and every
Approved Document M shows ways of complying. installation, only those which are needed to
Accessible consumer units should comply with establish whether the installation is safe.
BS EN 60439-3. 1.12 Appendix 6 of BS 7671 and Appendix B of
this Approved Document contain models of the
Inspection and testing before various BS 7671 certificates. Qualified installers
taking into service should use the one appropriate to the work they
have carried out.
General
1.13 BS 7671 does not insist on a Minor Works
1.7 Electrical installations should be inspected Certificate being issued for the replacement of
and tested as necessary and appropriate during equipment such as accessories or luminaires, but
and at the end of installation, before they are advises that this should be done where appropriate
taken into service, to verify that they are safe to inspection and testing has been carried out,
use, maintain and alter and comply with Part P irrespective of the extent of the work undertaken.
of the Building Regulations and with any other The Minor Works Certificate is not appropriate
relevant Parts of the Building Regulations. for the replacement of consumer units or similar
items, for which the full Electrical Installation
Certificate should be used.
Electrical safety – dwellings Approved Document P
10
ONLINE VERSION
13. DESIGN, INSTALLATION,L I N E V E R S I O N
O N INSPECTION AND TESTING P
1.14 Section 712 of BS 7671:2001 provides a b. Where the installer is not registered with a
list of all the inspections that may be necessary Part P competent person self-certification
although in particular cases only some elements scheme but qualified to complete BS 7671
will be relevant. A schedule of inspections forms installation certificates
part of the Electrical Installation Certificate in
1.21 Where notifiable electrical installer work
Appendix 6 of BS 7671 and in this Approved
is carried out by a person not registered with a
Document at Appendix B.
Part P competent person self-certification the
1.15 Section 713 of BS 7671:2001 provides work should be notified to a building control
a list of all the tests that may be necessary body (the local authority or an approved
although, again, in particular cases only some inspector) before work starts. Where the work is
elements may be relevant. A blank schedule necessary because of an emergency the building
for recording test results also forms part of the control body should be notified as soon as
Electrical Installation Certificate. Tests should possible. The building control body becomes
be carried out using appropriate and accurate responsible for making sure the work is safe
instruments under the conditions given in BS and complies with all relevant requirements of
7671, and the results compared with the relevant the Building Regulations.
performance criteria to confirm compliance.
1.22 Where installers are qualified to carry
1.16 The Minor Works Certificate lists six out inspection and testing and completing the
essential tests for additions and alterations that appropriate BS 7671 installation certificate, they
do not include the provision of a new circuit. should do so. A copy of the certificate should
Appropriate tests should be carried out depending then be given to the building control body. The
on the nature of the work. building control body will take this certificate into
account in deciding what further action (if any)
Building Regulations compliance certificates/ needs to be taken to make sure that the work
notices for notifiable work is safe and complies fully with all relevant
1.17 A Building Regulations compliance requirements. Building control bodies may ask for
certificate (issued by Part P competent person evidence that installers are qualified in this case.
scheme installers), completion certificates (issued 1.23 Where the building control body decides
by local authorities) and final notices (issued that the work is safe and meets all building
by approved inspectors) are evidence that regulation requirements it will issue a building
compliance with the Building Regulations has regulation completion certificate (the local
been achieved, and are issued on completion of authority) on request or a final certificate (an
notifiable works only. They are different documents approved inspector).
than a BS 7671 installation certificate and attest
compliance with all relevant requirements of the c. Where installers are not qualified to
Building Regulations, not just Part P. complete BS 7671 completion certificates
1.24 Where such installers (who may be
Certification of notifiable work contractors or DIYers) carry out notifiable electrical
a. Where the installer is registered with a Part P work, the building control body must be notified
competent person self-certification scheme before the work starts. Where the work is necessary
because of an emergency the building control body
1.18 Installers registered with a Part P competent should be notified as soon as possible. The building
person self-certification scheme are qualified to control body then becomes responsible for making
complete BS 7671 installation certificates and sure that the work is safe and complies with all
should do so in respect of every job they undertake. relevant requirements in the Building Regulations.
A copy of the certificate should always be given to
the person ordering the electrical installation work. 1.25 The amount of inspection and testing
needed is for the building control body to decide,
1.19 Where Installers registered with Part P based on the nature and extent of the electrical
competent person self-certification scheme, a work. For relatively simple notifiable jobs, such
Building Regulations compliance certificate must as adding a socket-outlet to a kitchen circuit,
be issued to the occupant either by the installer the inspection and testing requirements will be
or the installer’s registration body within 30 days minimal. For a house re-wire, a full set of inspections
of the work being completed. The relevant building and tests may need to be carried out.
control body should also receive a copy of the
information on the certificate within 30 days. 1.26 The building control body may choose to
carry out the inspection and testing itself, or to
1.20 The Regulations call for the Building contract out some or all of the work to a specialist
Regulations compliance certificate to be issued body to carry out the work on its behalf. Where
to the occupier. However, in the case of rented the building control body is a local authority it
properties, the certificate may be sent to the cannot require the building owner to undertake this
person ordering the work with a copy sent also work. However, under the Building (Local Authority
to the occupant. Charges) Regulations 2010, the authority may
charge a higher building control charge when first
notified the work or levy a supplementary charge
later, based on the recovery of its costs.
Approved Document P Electrical safety – dwellings
ONLINE VERSION 11
14. P DESIGN, INSTALLATION, N E V E RAND O N
ALLATION, INSPECTION S I TESTING
ONLI
1.27 A building control body will not issue a 1.34 The information should comprise items
BS 7671 installation certificate (as these can be called for by BS 7671:2001 or an equivalent
issued only by those carrying out the work), but standard and other appropriate information
only a Building Regulations completion certificate including:
(the local authority) or a final certificate (an
a. electrical installation certificates describing
approved inspector).
the installation and giving details of work
Third party certification carried out;
1.28 Unregistered installers should not b. permanent labels, for example on earth
themselves arrange for a third party to carry connections and bonds, and on items of
out final inspection and testing. The third party – electrical equipment such as consumer units
not having supervised the work from the and RCDs;
outset – would not be in a position to verify c. operating instructions and log books;
that the installation work complied fully with
BS 7671:2001 requirements. An electrical d. for unusually large or complex installations
installation certificate can be issued only by the only, detailed plans.
installer responsible for the installation work.
1.29 A third party could only sign a BS 7671:2001
Periodic Inspection Report or similar. The Report
would indicate that electrical safety tests had
been carried out on the installation which met
BS 7671:2001 criteria, but it could not verify that
the installation complied fully with BS 7671:2001
requirements – for example with regard to routing
of hidden cables.
Inspection and testing of
non-notifiable work
1.30 Non-notifiable electrical installation work
must also be carried out in accordance with the
requirements of BS 7671:2001 or an equivalent
standard. However, it is not necessary for the
work to be checked by a building control body or
alternatively carried out by an installer registered
with a Part P competent person self-certification
scheme.
1.31 Local authorities, however, can take
enforcement action if non-notifiable work – for
example electrical work which is part of a wider
project – is found to be unsafe and non-compliant.
1.32 Those qualified to complete BS 7671
installation certificates who carry out non-
notifiable work should issue the appropriate
electrical installation certificate for all but the
simplest of like-for-like replacements. DIYers may
wish to employ a qualified third party to carry out
inspection and testing of non-notifiable work to
make sure it is safe. The qualified person need
not necessarily be registered with a Part P
competent person scheme self-certification
scheme but, as required by BS 7671, must be
qualified in respect of the inspection and testing
of an installation.
Provision of information
1.33 Sufficient information should be left with
the occupant to ensure that persons wishing to
operate, maintain or alter an electrical installation
can do so with reasonable safety.
Electrical safety – dwellings Approved Document P
12
ONLINE VERSION
15. ONLINE VERSION P
Section 2: Extensions, material alterations
and material changes of use
2.1 Where any electrical installation work is
classified as an extension, a material alteration
or a material change of use, the addition and
alteration work must include:
a. such works on the existing fixed electrical
installation in the building as are necessary to
enable the additions and alterations, the circuits
which feed them, the protective measures and
the relevant earthing and bonding systems to
meet the requirements; and
b. establishing that the mains supply equipment
is suitable.
2.2 A way of complying would be to follow
for the new work the guidance given above in
Section 1 in relation to design, construction and
inspection and testing and to show that for the
altered circumstances:
a. the rating and the condition of the existing
equipment belonging to both the consumer
and to the electricity distributor:
i. can carry the additional loads being
allowed for, or
ii. are improved so that they can carry the
additional loads being allowed for; and
b. the correct protective measures are used; and
c. the earthing and equipotential bonding
arrangements are satisfactory.
2.3 In accordance with Regulation 4(3), the
whole of the existing installation does not need
to be upgraded to current standards, but only to
the extent necessary for the new work to meet
current standards except where upgrading is
required by the energy efficiency requirements
of the Building Regulations.
2.4 Appendix C offers guidance on some of
the types of older installations that might be
encountered in alteration work.
2.5 Appendix D offers guidance on applying
the harmonised European cable identification
system when making additions and alterations
to existing installations.
Approved Document P Electrical safety – dwellings
ONLINE VERSION 13
16. P ONLINE VERSION
Section 3: Information about other legislation
Electricity at Work Regulations 1989 for safety reasons), to maintain the supply within
defined tolerance limits and to provide certain
3.1 All electrical installations must be technical and safety information to consumers
accommodated in ways that meet the requirements to enable them to design their installations.
of the Building Regulations. However electrical
installations carried out by persons on whom 3.9 Distributors and meter operators must
duties are imposed by the Electricity at Work ensure that their equipment on consumers’
Regulations 1989 must meet the requirements premises is suitable for its purpose and safe in
of those Regulations. its particular environment and that the polarity
of conductors is clearly indicated.
3.2 The advice given below reflects the present
state of the Electricity at Work Regulations 1989 3.10 The Regulations allow the Secretary of
following amendments by Statutory Instruments State to issue safety enforcement notices to
1996/192, 1997/1993 and 1999/2024. consumers in circumstances where consumers’
installations outside buildings present a danger
3.3 Regulation 3 imposes duties on employers, to the public.
employees and the self-employed. Regulation
3(2)(b) places duties on employees equivalent to 3.11 In relation to ‘embedded’ generation5, the
those placed on employers and self-employed Regulations require persons operating ‘switched
persons where there are matters within their control. alternative’ sources of energy in their installations
to prevent a parallel connection occurring with
3.4 The text of the Electricity at Work Regulations the distributor’s network and to comply with BS
and guidance on how to comply with them are 7671. Sources of energy that operate in parallel
contained in the Health and Safety guidance with the distributor’s network must meet certain
document ‘Memorandum of Guidance on the additional safety standards: for example the
Electricity at Work Regulations 1989 – HSR25’. equipment must not be a source of danger or
Important elements of the Regulations include: cause interference with the distributor’s network.
a. The Electricity at Work Regulations require Persons installing domestic combined heat and
that electrical work is only carried out by power equipment must advise the local distributor
persons that are competent to prevent of their intentions before or at the time of
danger and injury while doing it, or who are commissioning the source.
appropriately supervised (Regulation 16). 3.12 Distributors are prevented by the Regulations
b. The Electricity at Work Regulations set general from connecting installations to their networks
requirements for the design, construction and which do not comply with BS 7671. Other persons
suitability of equipment for its intended use may connect installations to distributors’ networks
(Regulations 4(1), 5, 6, 7, 8, 9, 10, 11, 12). provided they obtain the prior consent of the
distributor, who may require evidence that the
Electricity Safety, Quality and installation complies with BS 7671 and that the
connection itself will meet safety and operational
Continuity Regulations 2002 requirements. Distributors may disconnect
3.5 The Electricity Safety, Quality and Continuity consumers’ installations which are a source of
Regulations 2002 (SI 2002/2665) came into danger or cause interference with their networks
force on 31 January 2003. These Regulations or other installations.
replaced the Electricity Supply Regulations 1988 3.13 Detailed Guidance on the Regulations is
(as amended). available at www.dti.gov.uk/electricity-regulations.
3.6 The Regulations specify safety standards
which are aimed at protecting the general public Functionality requirements
from danger. In addition, the Regulations specify 3.14 Part P of the Building Regulations makes
power quality and supply continuity requirements requirements covering the safety of fixed electrical
to ensure an efficient and economic electricity installations, but does not cover system functionality.
supply service for consumers.The Regulations The functionality of electrically powered systems
were introduced to improve standards in public such as fire alarm systems, fans and pumps is
safety and to align requirements to modern covered in other Parts of the Building Regulations
electricity markets. and other legislation.
3.7 The duty holders are generators, distributors,
suppliers, meter operators, consumers and
specified persons. Most of the duties apply to
distributors who own or operate networks used
to supply consumers’ installations, street furniture
or other networks.
3.8 Amongst other duties, distributors are 5
‘Embedded’ generators are those connected to the distribution networks
required to provide an earthing facility for new of public electricity suppliers rather than directly to the National Grid.
connections (unless this would be inappropriate Most CHP and renewable generating stations are embedded.
Electrical safety – dwellings Approved Document P
14
ONLINE VERSION
17. ONLINE VERSION P
Appendix A: Examples of electrical
installation diagrams
Notes d. Types of wiring or wiring system. While
PVC insulated and sheathed cables are
1. The diagrams do not give all the information likely to be suitable for much of the wiring
needed to achieve compliance with BS 7671, nor in a typical dwelling, other types of cable
do they cover all the electrical services found in may also be necessary. For example,
dwellings, some of which (e.g. swimming pools heat-resisting flexible cables are required for
and saunas) are subject to special requirements the final connections to certain equipment;
specified in Part 6 of BS 7671:2001. The diagrams the cable to the garage or shed, if run
must not be used for installation purposes. underground, is subject to certain
2. The diagrams are simplified examples of what requirements; and cables concealed in
may be encountered. They are not a substitute floors and walls in certain circumstances
for the proper consideration of for instance: are required to have an earthed metal
covering, be enclosed in steel conduit
a. Cross-sectional areas (csa) of the phase or have additional mechanical protection.
and neutral conductors of circuits. The
minimum csa required by BS 7671 depends e. Principles of cable routing. BS 7671 contains
on a number of variables, including: type criteria for the routing and positioning of
of cable, number of cores, type and cables, so as to give protection against
nominal current of overcurrent protective electric shock and fire as a result of
device, grouping with other circuits, mechanical damage to a cable. For example,
ambient temperature, contact with thermally such criteria are given for cables concealed
insulating materials and circuit length. in walls or buried in the ground.
b. Cross-sectional areas of protective f. Current ratings of circuits to fixed
conductors. BS 7671 contains different current-using equipment such as a
rules, involving a number of variables, for shower or cooker.
determining the minimum csa for each In the above context, diagrams are given as
type of protective conductor, including follows:
the earthing conductor, circuit protective
conductors, main equipotential bonding Diagram 1(a) indicates the many electrical
conductors and supplementary bonding appliances that can be found in the home and
conductors. how they might be supplied.
c. Types and nominal current ratings of Diagram 1(b) indicates earthing and bonding
fuses or circuit breakers. These particulars arrangements that can be necessary.
depend on the circuit design current Diagram 2(a) indicates earthing arrangements as
and load characteristics, and need to be might be provided by electricity distributors.
co-ordinated with the circuit conductors
and with the earth fault loop impedance Diagram 2(b) indicates the earthing arrangement
of the circuit. as might need to be provided by the consumer.
Key to diagrams
Approved Document P Electrical safety – dwellings
ONLINE VERSION 15
18. P EXAMPLES OF O N L I N E VALLATIONO N
INST E R S I
ELECTRICAL INSTALLATION DIAGRAMS
Diagram 1(a) Illustration of the fixed electrical installation that might be commonly
encountered in new or upgraded existing dwellings
Notes:
1. See the general rules in BS 7671:2001.
2. The RCD component in the main switch is required for TT systems (see Diagram 2(b)). Individual circuit 30mA RCDs may be required to avoid
unnecessary tripping.
3. The notices include advice on periodic testing and regular test operation of the RCDs.
4. The zone shown around the bath or shower corresponds to zone 3 in Section 601 of BS 7671:2001.
The socket-outlet shown in the bedroom with the shower cubicle must be outside zone 3.
Electrical safety – dwellings Approved Document P
16
ONLINE VERSION
19. EXAMPLES OF ELECTRICALN E V E R S I O N
O N L I INSTALLATION DIAGRAMS P
Diagram 1(b) Illustration of earthing and bonding conductors that might be part
of the electrical installation shown in Diagram 1(a)
Notes:
1. See the general rules in BS 7671:2001.
2. Circuit protective conductors are taken to all items of fixed electrical equipment and local isolation and switching devices which appear in Diagram 1(a).
3. In the case of a protective multiple earthing (PME) supply (see Diagram 2(a)), consult the electricity distributor.
4. Supplementary bonding is required in bathrooms to an extent dependent upon the presence of metallic fixtures, fittings and pipework: see Section 601
of BS 7671:2001.
Approved Document P Electrical safety – dwellings
ONLINE VERSION 17
20. P EXAMPLES OF O N L I N E VALLATIONO N
INST E R S I
ELECTRICAL INSTALLATION DIAGRAMS
Diagram 2(a) Example earthing arrangement where the electricity distributor
provides the earth connection (referred to as TN-C-S where the
connection is made to A, or TN-S where the connection is made
to B – the most common systems in urban areas)
Notes:
1. Connection A shows the arrangement where an electricity distributor provides a combined protective earthing and neutral conductor as part of a
protective multiple earthing system (referred to as TN-C-S).
Connection B shows the arrangement where an electricity distributor provides a protective earthing conductor (usually the metallic covering of the
supply cable) that is separate from the neutral conductor (as part of a system referred to as TN-S).
2. Connection A or B can only be made by the electricity distributor or its appointed agent.
Electrical safety – dwellings Approved Document P
18
ONLINE VERSION
21. EXAMPLES OF ELECTRICALN E V E R S I O N
O N L I INSTALLATION DIAGRAMS P
Diagram 2(b) Example earthing arrangement where consumers provide their own
earthing connection (referred to as a TT system)
Notes:
1. BS 7671:2001 requires that the part of the installation between the origin and the first RCD shall comply with the requirements for protection by Class II
equipment or equivalent insulation. For the arrangement shown, this applies to the consumer unit and the wiring connecting it to the supplier’s equipment.
2. The 100mA RCD component of the main switch should be of the time delayed type.
Approved Document P Electrical safety – dwellings
ONLINE VERSION 19
22. P ONLINE VERSION
Appendix B: Copies of BS 7671 and IEE
model forms
The BS 7671 and IEE forms and notes on the
following pages are taken from IEE Guidance
Note 3, 2002 edition, and are available for
downloading from the IEE website at www.iee.
org/Publish/WireRegs/forms.cfm.
They appear in the order:
Introduction
1. Introduction to Appendix 6 of BS 7671:2001
(Model forms for certification and reporting).
Initial inspection and testing
2. Notes for short form and full versions of
Electrical Installation Certificate.
3. Form 1 – Short form of Electrical Installation
Certificate (for use when one person is responsible
for the design, construction, inspection and
testing of an installation), including guidance
for recipients.
4. Form 2 – Full Electrical Installation
Certificate, including guidance for recipients
(standard form from Appendix 6 of BS 7671).
5. Form 3 – Schedule of Inspections (from
Appendix 6 of BS 7671) with notes.
6. Form 4 – Schedule of Test Results (from
Appendix 6 of BS 7671) with notes.
Minor works
7. Notes on completion of Minor Electrical
Installation Works Certificate.
8. Form 5 – Minor Electrical Installation Works
Certificate, including guidance for recipients
(from Appendix 6 of BS 7671).
Electrical safety – dwellings Approved Document P
20
ONLINE VERSION
23. COPIES OF BS 7671 AND IEE MODELE R S I O N
O N L I N E V FORMS P
CERTIFICATION AND REPORTING
Introduction
i. The Electrical Installation Certificate required by Part 7 of BS 7671 shall be made out and
signed or otherwise authenticated by a competent person or persons in respect of the design,
construction, inspection and testing of the work.
ii. The Minor Works Certificate required by Part 7 of BS 7671 shall be made out and signed or
otherwise authenticated by a competent person in respect of the inspection and testing of
an installation.
iii. The Periodic Inspection Report required by Part 7 of BS 7671 shall be made out and signed
or otherwise authenticated by a competent person in respect of the inspection and testing of
an installation.
iv. Competent persons will, as appropriate to their function under (i) (ii) and (iii) above, have a
sound knowledge and experience relevant to the nature of the work undertaken and to the
technical standards set down in this British Standard, be fully versed in the inspection and
testing procedures contained in this Standard and employ adequate testing equipment.
v. Electrical Installation Certificates will indicate the responsibility for design, construction,
inspection and testing, whether in relation to new work or further work on an existing installation.
Where design, construction and inspection and testing are the responsibility of one person,
a Certificate with a single signature declaration in the form shown below may replace the
multiple signatures section of the model form.
FOR DESIGN, CONSTRUCTION, INSPECTION & TESTING.
I being the person responsible for the Design, Construction, Inspection & Testing of
the electrical installation (as indicated by my signature below), particulars of which
are described above, having exercised reasonable skill and care when carrying out
the Design, Construction, Inspection & Testing, hereby CERTIFY that the said work for
which I have been responsible is to the best of my knowledge and belief in accordance
with BS 7671: …………, amended to ………… (date) except for the departures, if any,
detailed as follows.
vi. A Minor Works Certificate will indicate the responsibility for design, construction, inspection
and testing of the work described in Part 4 of the certificate.
vii. A Periodic Inspection Report will indicate the responsibility for the inspection and testing of
an installation within the extent and limitations specified on the report.
viii. A schedule of inspections and a schedule of test results as required by Part 7 (of BS 7671) shall
be issued with the associated Electrical Installation Certificate or Periodic Inspection Report.
ix. When making out and signing a form on behalf of a company or other business entity,
individuals shall state for whom they are acting.
x. Additional forms may be required as clarification, if needed by non-technical persons, or in
expansion, for larger or more complex installations.
xi. The IEE Guidance Note 3 provides further information on inspection and testing on completion
and for periodic inspections.
Approved Document P Electrical safety – dwellings
ONLINE VERSION 21
24. P COPIES OF BS O N L I N E MODEL FORMS N
7671 AND IEE V E R S I O
Electrical installation certificates
Notes for Forms 1 and 2
1. The Electrical Installation Certificate is to be used only for the initial certification of a new installation
or for an alteration or addition to an existing installation where new circuits have been introduced.
It is not to be used for a Periodic Inspection for which a Periodic Inspection Report form should be
used. For an alteration or addition which does not extend to the introduction of new circuits, a Minor
Electrical Installation Works Certificate may be used.
The original Certificate is to be given to the person ordering the work (Regulation 742-01-03).
A duplicate should be retained by the contractor.
2. This Certificate is only valid if accompanied by the Schedule of Inspections and the Schedule(s) of
Test Results.
3. The signatures appended are those of the persons authorised by the companies executing the work
of design, construction and inspection and testing respectively. A signatory authorised to certify
more than one category of work should sign in each of the appropriate places.
4. The time interval recommended before the first periodic inspection must be inserted (see IEE
Guidance Note 3 for guidance).
5. The page numbers for each of the Schedules of Test Results should be indicated, together with
the total number of sheets involved.
6. The maximum prospective fault current recorded should be the greater of either the short-circuit
current or the earth fault current.
7. The proposed date for the next inspection should take into consideration the frequency and quality
of maintenance that the installation can reasonably be expected to receive during its intended life,
and the period should be agreed between the designer, installer and other relevant parties.
Electrical safety – dwellings Approved Document P
22
ONLINE VERSION
25. COPIES OF BS 7671 AND IEE MODELE R S I O N
O N L I N E V FORMS P
Approved Document P Electrical safety – dwellings
ONLINE VERSION 23
26. P COPIES OF BS O N L I N E MODEL FORMS N
7671 AND IEE V E R S I O
Electrical safety – dwellings Approved Document P
24
ONLINE VERSION
27. COPIES OF BS 7671 AND IEE MODELE R S I O N
O N L I N E V FORMS P
Approved Document P Electrical safety – dwellings
ONLINE VERSION 25
28. P COPIES OF BS O N L I N E MODEL FORMS N
7671 AND IEE V E R S I O
Electrical safety – dwellings Approved Document P
26
ONLINE VERSION
29. COPIES OF BS 7671 AND IEE MODELE R S I O N
O N L I N E V FORMS P
Approved Document P Electrical safety – dwellings
ONLINE VERSION 27
30. P COPIES OF BS O N L I N E MODEL FORMS N
7671 AND IEE V E R S I O
Electrical safety – dwellings Approved Document P
28
ONLINE VERSION
31. COPIES OF BS 7671 AND IEE MODELE R S I O N
O N L I N E V FORMS P
Approved Document P Electrical safety – dwellings
ONLINE VERSION 29
32. P COPIES OF BS O N L I N E MODEL FORMS N
7671 AND IEE V E R S I O
Notes on schedule of test results
* Type of supply is ascertained from the supply company or by inspection.
* Ze at origin. When the maximum value declared by the electricity supplier is used, the
effectiveness of the earth must be confirmed by a test. If measured the main bonding will need
to be disconnected for the duration of the test.
* Short-circuit capacity of the device is noted, see Table 7.2A of the On-Site Guide or 2.7.15 of GN3.
* Prospective fault current (PFC). The value recorded is the greater of either the short-circuit
current or the earth fault current. Preferably determined by enquiry of the supplier.
The following tests, where relevant, shall be carried out in the following sequence:
Continuity of protective conductors, including main and supplementary bonding
Every protective conductor, including main and supplementary bonding conductors, should be
tested to verify that it is continuous and correctly connected.
*6 Continuity
Where Test Method 1 is used, enter the measured resistance of the phase conductor plus the
circuit protective conductor (R1+ R2).
See 10.3.1 of the On-Site Guide or 2.7.5 of GN3.
During the continuity testing (Test Method 1) the following polarity checks are to be carried out:
a. every fuse and single-pole control and protective device is connected in the phase conductor only;
b. centre-contact bayonet and Edison screw lampholders have outer contact connected to the
neutral conductor;
c. wiring is correctly connected to socket-outlets and similar accessories.
Compliance is to be indicated by a tick in polarity column 11.
(R1 + R2) need not be recorded if R2 is recorded in column 7.
*7 Where Test Method 2 is used, the maximum value of R2 is recorded in column 7.
Where the alternative method of Regulation 413-02-12 is used for shock protection, the
resistance of the circuit protective conductor R2 is measured and recorded in column 7.
See 10.3.1 of the On-Site Guide or 2.7.5 of GN3.
*8 Continuity of ring final circuit conductors
A test shall be made to verify the continuity of each conductor including the protective
conductor of every ring final circuit.
See 10.3.2 of the On-Site Guide or 2.7.6 of GN3.
*9,*10 Insulation resistance
All voltage sensitive devices to be disconnected or test between live conductors (phase and
neutral) connected together and earth.
The insulation resistance between live conductors is to be inserted in column 9.
The minimum insulation resistance values are given in Table 10.1 of the On-Site Guide or Table
2.2 of GN3.
See 10.3.3(iv) of the On-Site Guide or 2.7.7 of GN3.
All the preceding tests should be carried out before the installation is energised.
*11 Polarity
A satisfactory polarity test may be indicated by a tick in column 11.
Only in a Schedule of Test Results associated with a Periodic Inspection Report is it
acceptable to record incorrect polarity.
Electrical safety – dwellings Approved Document P
30
ONLINE VERSION
33. COPIES OF BS 7671 AND IEE MODELE R S I O N
O N L I N E V FORMS P
*12 Earth fault loop impedance Zs
This may be determined either by direct measurement at the furthest point of a live circuit or
by adding (R1 + R2) of column 6 to Ze. Ze is determined by measurement at the origin of the
installation or preferably the value declared by the supply company used.
Zs = Ze + (R1 + R2). Zs should be less than the values given in Appendix 2 of the On-Site
Guide or Appendix 2 of GN3.
*13 Functional testing
The operation of RCDs (including RCBOs) shall be tested by simulating a fault condition,
independent of any test facility in the device.
Record operating time in column 13. Effectiveness of the test button must be confirmed.
See Section 11 of the On-Site Guide or 2.7.16 of GN3.
*14 All switchgear and controlgear assemblies, drives, control and interlocks, etc. must be operated
to ensure that they are properly mounted, adjusted and installed.
Satisfactory operation is indicated by a tick in column 14.
Earth electrode resistance
The earth electrode resistance of TT installations must be measured, and normally an RCD
is required.
For reliability in service the resistance of any earth electrode should be below 200W. Record
the value on Form 1, 2 or 6, as appropriate.
See 10.3.5 of the On-Site Guide or 2.7.13 of GN3.
Approved Document P Electrical safety – dwellings
ONLINE VERSION 31
34. P COPIES OF BS O N L I N E MODEL FORMS N
7671 AND IEE V E R S I O
Electrical safety – dwellings Approved Document P
32
ONLINE VERSION
35. COPIES OF BS 7671 AND IEE MODELE R S I O N
O N L I N E V FORMS P
Approved Document P Electrical safety – dwellings
ONLINE VERSION 33
36. P COPIES OF BS O N L I N E MODEL FORMS N
7671 AND IEE V E R S I O
Notes on completion of minor electrical installation works certificate
Scope
The Minor Works Certificate is intended to be used for additions and alterations to an installation that
do not extend to the provision of a new circuit. Examples include the addition of a socket-outlet or a
lighting point to an existing circuit, the relocation of a light switch, etc. This Certificate may also be used
for the replacement of equipment such as accessories or luminaires, but not for the replacement of
distribution boards or similar items. Appropriate inspection and testing, however, should always be
carried out irrespective of the extent of the work undertaken.
Part 1 Description of minor works
1, 2 The minor works must be so described that the work that is the subject of the certification can
be readily identified.
4 See Regulations 120-01-03 and 120-02. No departures are to be expected except in most
unusual circumstances. See also Regulation 743-01-01.
Part 2 Installation details
2 The method of protection against indirect contact shock must be clearly identified, e.g. earthed
equipotential bonding and automatic disconnection of supply using fuse/circuit-breaker/RCD.
4 If the existing installation lacks either an effective means of earthing or adequate main
equipotential bonding conductors, this must be clearly stated. See Regulation 743-01-02.
Recorded departures from BS 7671 may constitute non-compliance with the Electricity Supply
Regulations 1988 as amended or the Electricity at Work Regulations 1989. It is important that
the client is advised immediately in writing.
Part 3 Essential tests
The relevant provisions of Part 7 (Inspection and Testing) of BS 7671 must be applied in full to all minor
works. For example, where a socket-outlet is added to an existing circuit it is necessary to:
1 establish that the earthing contact of the socket-outlet is connected to the main earthing terminal;
2 measure the insulation resistance of the circuit that has been added to, and establish that it
complies with Table 71A of BS 7671;
3 measure the earth fault loop impedance to establish that the maximum permitted disconnection
time is not exceeded;
4 check that the polarity of the socket-outlet is correct;
5 (if the work is protected by an RCD) verify the effectiveness of the RCD.
Part 4 Declaration
1, 3 The Certificate shall be made out and signed by a competent person in respect of the design,
construction, inspection and testing of the work.
1, 3 The competent person will have a sound knowledge and experience relevant to the nature of
the work undertaken and to the technical standards set down in BS 7671, be fully versed in
the inspection and testing procedures contained in the Regulations and employ adequate
testing equipment.
2 When making out and signing a form on behalf of a company or other business entity,
individuals shall state for whom they are acting.
Electrical safety – dwellings Approved Document P
34
ONLINE VERSION