Enthusiastic Quality and Fabrication Engineer with 3 + years of experience. Seeking to use proven project management and inspection skill on advanced manufacturing excellence at ABS Engineers. Increased production efficiency by 32% at MATE structural fabrication. Lowered welding defects 28 % department-wide. Certified NDT LEVEL-II Engineer.

1. 1
BHUVANESHWARAN E.
Quality & Fabrication Engineer – Structures & Pressure Vessels
: bhuvaneshwaran.e@outlook.com : +971544939795
: bhuvaneshwaran.e : R3764422
: https://www.linkedin.com/in/bhuvaneshwaran-elayaperumal-561957150/
: United Arab Emirates Visit Visa
Enthusiastic Quality and Fabrication Engineer with 3 + years of experience. Seeking to use
proven project management and inspection skill on advanced manufacturing excellence at
ABS Engineers. Increased production efficiency by 32% at MATE structural fabrication.
Lowered welding defects 28 % department-wide. Certified NDT LEVEL-II Engineer.
QUALITY AND FABRICATION ENGINEER at ABS ENGINEERS (2017 – 2018 ):
Independent Manufacturer and fabricator of Heavy structures, Pressure vessels, Boilers,
Hopper & Chute, Conveyor, MS & SS - Columns, Casings & Tanks up to 50 mm thick.
PROJECTS HANDLED:
 Fives Cail – KCP
 Motherson Automotive Technologies and Engineering (Fabrication and Erection)
 JK Tyres & Industries (Fabrication and Erection)
 CEAT Limited
 Amara Raja Pvt. Limited (Fabrication & Erection)
 ICF- Integral Coach Factory (Indian Railways Chennai)
OPERATIONS ON QUALITY:
 Non-destructive testing’s-UT,RT, RTFI & PT on Pressure Vessels, Heavy equipment.
 Inspection – Raw Materials, Dimension, Welding, Testing, Preservation and Packing.
 Documentation – QAP / ITP, WPS, PQR,WPQ,Inspection Reports, WorkSchedule chart.
 Codes & Specification – ASME VIII, NACE, Design code, Approved Drawings, Purchase order
specification, Purchaser’s standards and NDE Procedures.
 To ensure that all operations / activities related to project are executed as per requirements to
customer.
OPERATIONS ON FABRICATION:
 Planning – Task Scheduling, Loading Production,Facility location, Follow up & Execution.
 Procurement – Materials, Selection of Suppliers, TechnicalEvaluation, Negotiation.
 To assess & ascertain, the process and intricacy involved in the fabricationworks of each project
organize resources to cater to all the requirements.
 Closely monitor the project status withrespect to delivery requirements.
 Carryout conclusivesupervision for every project before release of material / handling of project
to the customer.
 Ensure purchase team has timely raised POwithin the projectbudget.
 Monitor and achieve department objectives.

2. 2
ASSISTANT QUALITY SUPERVISOR at LARSEN & TOUBRO (2016 - 2017):
PROJECTS HANDLED:
1. SAUDI ARAMCO 4. Tecnicas and Reunidas
2. Saipem 5. Sepco
3. Hitachi 6. Petrofac
OPERATIONS:
 Supervises and coordinates activities of workers engaged in inspecting incoming
materials of all projects, to adhere all inspection as per ASME standards.
 Internal forging and casting inspection on valves, Conducting Third party offering on non-
destructive testings (VT, UT, RT, RTFI, MPT & PT) & Painting,.
 Pre-dispatch inspection on heavy duty valves.
 Document dimensional studies, Material Test Certificate, QAP/ITP, Check sheets and Offer
lists.
QC - LINE INSPECTOR at SREE CHANDRA AUTO COMPONENTS(2015-2016)
OPERATIONS:
 Approves in-process production by confirming specifications.
 Conducting visual and measurement tests; communicating required adjustments to
production supervisor.
 Documentation -Inspection test plan- ITP, Product part approval process - PPAP,
Standard Operating Procedure - SOP, Statistical Process Control - SPC.
ACCOMPLISHMENT
 Achieved 93% of pass rate on braking hubs from 72% by conducting KT (Knowledge
Transfer) classes to machine setters/ operators.
 Been a trainer for valve manufacturers on inspection and testing
 Increased 11% valve offering rate every month
 Promoted as Fabrication Engineer – ABS Engineers
TRAININGS UNDERTAKEN:
 Completed In-Plant Training in Chennai port.
 Completed In-Plant Training in Marto pearl alloys Pvt. Limited.
 Attended Automobile Workshop in MIT.
 Industrial visit at Hindustan aeronautical LTD (HAL
SCHOLASTICS:
Bachelor of Engineering (Mechanical Engineering)
2015
RRASE college of Engineering, Anna University, Chennai
CERTIFIED ON ASNT SNT-TC 1A 2011 NDT LEVEL II (UT, RT, RTFI, MPT, LPT & VT).
Linguistic Abilities - ENGLISH HINDI TAMIL
Fluent Basic Fluent