The document outlines a Code of Conduct and Ethics for engineers in Bhutan. It begins with defining ethics as rules that govern conduct. It then lists a pledge by Bhutanese engineers to abide by ethics regarding their responsibilities to the engineering profession, public, employers, human welfare, research, the environment, and cultural values. The code further details responsibilities in each of these areas over several pages with specific guidelines. It concludes by listing references used in developing the code.
Pbl learners in digital content creation in sciencesChole Richard
Presentation on a newly thought out project using concept of project based learning program to engage learners in digital content creation for learning purposes in sciences.The presentation was made with objective of sharing a new concept in learning and to subject the project to teacher evaluation.
Describe the key thrust of the first canon of the Engineers Code of.pdfakashcommunication
Describe the key thrust of the first canon of the Engineer\'s Code of Ethics. Describe activities
that the Engineer can perform throughout the project life cycle in support of the First canon (e.g.
in Design Phase, Bid Package Preparation, and Construction Phase Services). You can
summarize your list of activities/examples in a table, specifying for each activity which
requirements/sub-section(s) a) through f) are addressed by such activity. Listing of activities
addressing most sub sections a through f is a plus. list a case example of Canon i possible
violation and its potential negative impacts, and possible ways that its contents can be controlled,
i.e. engineers to act within their area of competence, both voluntarily, but also In a \"community
based\" approach. A- List the canons of the Code of Ethics which relate to Risk Avoidance/Risk
Management for the general public and/or the parties involved in the design/construction project
cycle. Illustrate with one or 2 examples. List the canons of the Code of Ethics which relate to
personal/moral ethics of the engineer (example: fraud avoidance, conflicts of interest) throughout
the design/construction project cycle. Illustrate with one or 2 examples. Which canon relates to
the Engineer\'s need for continuous Improvement and learning, and support of professional
groups? Which canon(s) lists the need for sustainable environment and a good stewardship of the
environment? What Is the rationale for these themes to be included in the Code of Ethics?
Solution
ANS 1):- Key Thrust of the First Cannon of the Engineer\'s Code of Ethics :-
Engineers shall hold paramount the safety, health, and welfare of the public and shall
strive to comply with the principles of sustainable development in the performance of
their professional duties.
a. Engineers shall recognize that the lives, safety, health and welfare of the general
public are dependent upon engineering judgments, decisions, and practices incorporated
into structures, machines, products, processes and devices.
b. Engineers shall approve or seal only those design documents, reviewed or prepared
by them, which are determined to be safe for public health and welfare in
conformity with accepted engineering standards.
c. Engineers whose professional judgment is overruled under circumstances where
the safety, health and welfare of the public are endangered, or the principles of
sustainable development ignored, shall inform their clients or employers of the
possible consequences.
d. Engineers who have knowledge or reason to believe that another person or firm
may be in violation of any of the provisions of Canon 1 shall present such information
to the proper authority in writing and shall cooperate with the proper
authority in furnishing such further information or assistance as may be required.
e. Engineers should seek opportunities to be of constructive service in civic affairs
and work for the advancement of the safety, health and well-being of their c.
Code of Ethics for Engineers 4. Engineers shall act .docxmonicafrancis71118
Code of Ethics for Engineers
4. Engineers shall act for each employer or client as faithful agents or
trustees.
a. Engineers shall disclose all known or potential conflicts of interest
that could influence or appear to influence their judgment or the
quality of their services.
b. Engineers shall not accept compensation, financial or otherwise,
from more than one party for services on the same project, or for
services pertaining to the same project, unless the circumstances are
fully disclosed and agreed to by all interested parties.
c. Engineers shall not solicit or accept financial or other valuable
consideration, directly or indirectly, from outside agents in
connection with the work for which they are responsible.
d. Engineers in public service as members, advisors, or employees
of a governmental or quasi-governmental body or department shall
not participate in decisions with respect to services solicited or
provided by them or their organizations in private or public
engineering practice.
e. Engineers shall not solicit or accept a contract from a governmental
body on which a principal or officer of their organization serves as
a member.
5. Engineers shall avoid deceptive acts.
a. Engineers shall not falsify their qualifications or permit
misrepresentation of their or their associates’ qualifications. They
shall not misrepresent or exaggerate their responsibility in or for the
subject matter of prior assignments. Brochures or other
presentations incident to the solicitation of employment shall not
misrepresent pertinent facts concerning employers, employees,
associates, joint venturers, or past accomplishments.
b. Engineers shall not offer, give, solicit, or receive, either directly or
indirectly, any contribution to influence the award of a contract by
public authority, or which may be reasonably construed by the
public as having the effect or intent of influencing the awarding of a
contract. They shall not offer any gift or other valuable
consideration in order to secure work. They shall not pay a
commission, percentage, or brokerage fee in order to secure work,
except to a bona fide employee or bona fide established commercial
or marketing agencies retained by them.
III. Professional Obligations
1. Engineers shall be guided in all their relations by the highest standards
of honesty and integrity.
a. Engineers shall acknowledge their errors and shall not distort or
alter the facts.
b. Engineers shall advise their clients or employers when they believe
a project will not be successful.
c. Engineers shall not accept outside employment to the detriment of
their regular work or interest. Before accepting any outside
engineering employment, they will notify their employers.
d. Engineers shall not attempt to attract an engineer from another
employer by false or misleading pretenses.
e. Engineers shall not promote their own interest at the expense of the
dignity and integr.
Pbl learners in digital content creation in sciencesChole Richard
Presentation on a newly thought out project using concept of project based learning program to engage learners in digital content creation for learning purposes in sciences.The presentation was made with objective of sharing a new concept in learning and to subject the project to teacher evaluation.
Describe the key thrust of the first canon of the Engineers Code of.pdfakashcommunication
Describe the key thrust of the first canon of the Engineer\'s Code of Ethics. Describe activities
that the Engineer can perform throughout the project life cycle in support of the First canon (e.g.
in Design Phase, Bid Package Preparation, and Construction Phase Services). You can
summarize your list of activities/examples in a table, specifying for each activity which
requirements/sub-section(s) a) through f) are addressed by such activity. Listing of activities
addressing most sub sections a through f is a plus. list a case example of Canon i possible
violation and its potential negative impacts, and possible ways that its contents can be controlled,
i.e. engineers to act within their area of competence, both voluntarily, but also In a \"community
based\" approach. A- List the canons of the Code of Ethics which relate to Risk Avoidance/Risk
Management for the general public and/or the parties involved in the design/construction project
cycle. Illustrate with one or 2 examples. List the canons of the Code of Ethics which relate to
personal/moral ethics of the engineer (example: fraud avoidance, conflicts of interest) throughout
the design/construction project cycle. Illustrate with one or 2 examples. Which canon relates to
the Engineer\'s need for continuous Improvement and learning, and support of professional
groups? Which canon(s) lists the need for sustainable environment and a good stewardship of the
environment? What Is the rationale for these themes to be included in the Code of Ethics?
Solution
ANS 1):- Key Thrust of the First Cannon of the Engineer\'s Code of Ethics :-
Engineers shall hold paramount the safety, health, and welfare of the public and shall
strive to comply with the principles of sustainable development in the performance of
their professional duties.
a. Engineers shall recognize that the lives, safety, health and welfare of the general
public are dependent upon engineering judgments, decisions, and practices incorporated
into structures, machines, products, processes and devices.
b. Engineers shall approve or seal only those design documents, reviewed or prepared
by them, which are determined to be safe for public health and welfare in
conformity with accepted engineering standards.
c. Engineers whose professional judgment is overruled under circumstances where
the safety, health and welfare of the public are endangered, or the principles of
sustainable development ignored, shall inform their clients or employers of the
possible consequences.
d. Engineers who have knowledge or reason to believe that another person or firm
may be in violation of any of the provisions of Canon 1 shall present such information
to the proper authority in writing and shall cooperate with the proper
authority in furnishing such further information or assistance as may be required.
e. Engineers should seek opportunities to be of constructive service in civic affairs
and work for the advancement of the safety, health and well-being of their c.
Code of Ethics for Engineers 4. Engineers shall act .docxmonicafrancis71118
Code of Ethics for Engineers
4. Engineers shall act for each employer or client as faithful agents or
trustees.
a. Engineers shall disclose all known or potential conflicts of interest
that could influence or appear to influence their judgment or the
quality of their services.
b. Engineers shall not accept compensation, financial or otherwise,
from more than one party for services on the same project, or for
services pertaining to the same project, unless the circumstances are
fully disclosed and agreed to by all interested parties.
c. Engineers shall not solicit or accept financial or other valuable
consideration, directly or indirectly, from outside agents in
connection with the work for which they are responsible.
d. Engineers in public service as members, advisors, or employees
of a governmental or quasi-governmental body or department shall
not participate in decisions with respect to services solicited or
provided by them or their organizations in private or public
engineering practice.
e. Engineers shall not solicit or accept a contract from a governmental
body on which a principal or officer of their organization serves as
a member.
5. Engineers shall avoid deceptive acts.
a. Engineers shall not falsify their qualifications or permit
misrepresentation of their or their associates’ qualifications. They
shall not misrepresent or exaggerate their responsibility in or for the
subject matter of prior assignments. Brochures or other
presentations incident to the solicitation of employment shall not
misrepresent pertinent facts concerning employers, employees,
associates, joint venturers, or past accomplishments.
b. Engineers shall not offer, give, solicit, or receive, either directly or
indirectly, any contribution to influence the award of a contract by
public authority, or which may be reasonably construed by the
public as having the effect or intent of influencing the awarding of a
contract. They shall not offer any gift or other valuable
consideration in order to secure work. They shall not pay a
commission, percentage, or brokerage fee in order to secure work,
except to a bona fide employee or bona fide established commercial
or marketing agencies retained by them.
III. Professional Obligations
1. Engineers shall be guided in all their relations by the highest standards
of honesty and integrity.
a. Engineers shall acknowledge their errors and shall not distort or
alter the facts.
b. Engineers shall advise their clients or employers when they believe
a project will not be successful.
c. Engineers shall not accept outside employment to the detriment of
their regular work or interest. Before accepting any outside
engineering employment, they will notify their employers.
d. Engineers shall not attempt to attract an engineer from another
employer by false or misleading pretenses.
e. Engineers shall not promote their own interest at the expense of the
dignity and integr.
Code of Ethics for Engineers 4. Engineers shall act .docxmary772
Code of Ethics for Engineers
4. Engineers shall act for each employer or client as faithful agents or
trustees.
a. Engineers shall disclose all known or potential conflicts of interest
that could influence or appear to influence their judgment or the
quality of their services.
b. Engineers shall not accept compensation, financial or otherwise,
from more than one party for services on the same project, or for
services pertaining to the same project, unless the circumstances are
fully disclosed and agreed to by all interested parties.
c. Engineers shall not solicit or accept financial or other valuable
consideration, directly or indirectly, from outside agents in
connection with the work for which they are responsible.
d. Engineers in public service as members, advisors, or employees
of a governmental or quasi-governmental body or department shall
not participate in decisions with respect to services solicited or
provided by them or their organizations in private or public
engineering practice.
e. Engineers shall not solicit or accept a contract from a governmental
body on which a principal or officer of their organization serves as
a member.
5. Engineers shall avoid deceptive acts.
a. Engineers shall not falsify their qualifications or permit
misrepresentation of their or their associates’ qualifications. They
shall not misrepresent or exaggerate their responsibility in or for the
subject matter of prior assignments. Brochures or other
presentations incident to the solicitation of employment shall not
misrepresent pertinent facts concerning employers, employees,
associates, joint venturers, or past accomplishments.
b. Engineers shall not offer, give, solicit, or receive, either directly or
indirectly, any contribution to influence the award of a contract by
public authority, or which may be reasonably construed by the
public as having the effect or intent of influencing the awarding of a
contract. They shall not offer any gift or other valuable
consideration in order to secure work. They shall not pay a
commission, percentage, or brokerage fee in order to secure work,
except to a bona fide employee or bona fide established commercial
or marketing agencies retained by them.
III. Professional Obligations
1. Engineers shall be guided in all their relations by the highest standards
of honesty and integrity.
a. Engineers shall acknowledge their errors and shall not distort or
alter the facts.
b. Engineers shall advise their clients or employers when they believe
a project will not be successful.
c. Engineers shall not accept outside employment to the detriment of
their regular work or interest. Before accepting any outside
engineering employment, they will notify their employers.
d. Engineers shall not attempt to attract an engineer from another
employer by false or misleading pretenses.
e. Engineers shall not promote their own interest at the expense of the
dignity and integr.
Engineering Ethics: The Essence of Engineering Excellence | IEB 2019Abdullah Al Moinee
Moinee, A. Al., 2019, “Engineering Ethics: The Essence of Engineering Excellence," Engineering Excellence: Earth to Space, 59th IEB (The Institution of Engineers, Bangladesh) Convention, Dhaka, Bangladesh, pp. 07-10.
2 Ethics Session 1.pptxEthics in Engineering Pra.docxherminaprocter
2 Ethics Session 1.pptx
Ethics in Engineering Practice
MET 2711
1
This Photo by Unknown Author is licensed under CC BY-NC-ND
What is Engineering?
Engineers concern themselves with:
“the art of the practical application of scientific and empirical knowledge to the design and production or accomplishment of various sorts of constructive projects, machines and materials of use or value to man.”
“Value is not necessarily measured by an economic yardstick; the ancient pyramids and not a few structures since are of slight economic worth, while their value in terms of faith and beauty has often been considerable.”
2
Socrates on Ethics
Ethics are the norms by which acceptable and unacceptable behavior are measured.
According to Socrates, one develops ethics through maturity, wisdom and love.
Introduced the concept of teaching ethics and acceptable standards of conduct in 400 B.C.
Believed virtue was found primarily in human relationships, love and friendship, not through material gains.
3
https://classroom.synonym.com/what-were-socrates-beliefs-on-ethics-12084753.html
This Photo by Unknown Author is licensed under CC BY-NC-ND
A Brief Look at Engineering Projects Through the Ages
4
Roman Aquaducts
Contributed to the health and welfare of the society
Provided 200 million gallons of clean running water and plumbing to individual structures daily (200 gallons per person)
Supported economic activity
Allowed city of Rome to grow to approximately 1 million people
312 BCE to 500 AD
5
This Photo by Unknown Author is licensed under CC BY-SA
Santa Maria del Fiori (Florence Basilica)
Earliest and largest free-standing dome
Built as Europe recovered from the Black Plague, which killed approximately 1/3 of the population
An example of a project that reflected optimism for the future (faith and beauty)
Design competition in 1423
Brunelleschi proposes unique design, but contract requires him to share project responsibilities with Ghiberti
Brunelleschi had lost prior design competition to Ghiberti
6
This Photo by Unknown Author is licensed under CC BY-NC-ND
https://www.khanacademy.org/humanities/renaissance-reformation/early-renaissance1/sculpture-architecture-florence/v/brunelleschi-dome-of-the-cathedral-of-florence-1420-36
Santa Maria del Fiori (Florence Basilica)
Designs unique dome requiring no scaffolding. Uses brick in herringbone pattern to distribute weight out and down.
Includes a series of horizontal chains to keep structure from expanding outward
When time to install chains, Brunelleschi claims to be ill, so Ghiberti starts chain installation (without full details from Brunelleschi)
Brunelleschi “recovers” and criticizes the work, saying it will all have to be re-done
Setting up his fellow architect to fail (dishonorable conduct)
7
This Photo by Unknown Author is licensed under CC BY-NC-ND
https://www.khanacademy.org/humanities/renaissance-reformation/early-renaissance1/sculpture-ar.
2 Ethics Session 1.pptxEthics in Engineering Pra.docxjesusamckone
2 Ethics Session 1.pptx
Ethics in Engineering Practice
MET 2711
1
This Photo by Unknown Author is licensed under CC BY-NC-ND
What is Engineering?
Engineers concern themselves with:
“the art of the practical application of scientific and empirical knowledge to the design and production or accomplishment of various sorts of constructive projects, machines and materials of use or value to man.”
“Value is not necessarily measured by an economic yardstick; the ancient pyramids and not a few structures since are of slight economic worth, while their value in terms of faith and beauty has often been considerable.”
2
Socrates on Ethics
Ethics are the norms by which acceptable and unacceptable behavior are measured.
According to Socrates, one develops ethics through maturity, wisdom and love.
Introduced the concept of teaching ethics and acceptable standards of conduct in 400 B.C.
Believed virtue was found primarily in human relationships, love and friendship, not through material gains.
3
https://classroom.synonym.com/what-were-socrates-beliefs-on-ethics-12084753.html
This Photo by Unknown Author is licensed under CC BY-NC-ND
A Brief Look at Engineering Projects Through the Ages
4
Roman Aquaducts
Contributed to the health and welfare of the society
Provided 200 million gallons of clean running water and plumbing to individual structures daily (200 gallons per person)
Supported economic activity
Allowed city of Rome to grow to approximately 1 million people
312 BCE to 500 AD
5
This Photo by Unknown Author is licensed under CC BY-SA
Santa Maria del Fiori (Florence Basilica)
Earliest and largest free-standing dome
Built as Europe recovered from the Black Plague, which killed approximately 1/3 of the population
An example of a project that reflected optimism for the future (faith and beauty)
Design competition in 1423
Brunelleschi proposes unique design, but contract requires him to share project responsibilities with Ghiberti
Brunelleschi had lost prior design competition to Ghiberti
6
This Photo by Unknown Author is licensed under CC BY-NC-ND
https://www.khanacademy.org/humanities/renaissance-reformation/early-renaissance1/sculpture-architecture-florence/v/brunelleschi-dome-of-the-cathedral-of-florence-1420-36
Santa Maria del Fiori (Florence Basilica)
Designs unique dome requiring no scaffolding. Uses brick in herringbone pattern to distribute weight out and down.
Includes a series of horizontal chains to keep structure from expanding outward
When time to install chains, Brunelleschi claims to be ill, so Ghiberti starts chain installation (without full details from Brunelleschi)
Brunelleschi “recovers” and criticizes the work, saying it will all have to be re-done
Setting up his fellow architect to fail (dishonorable conduct)
7
This Photo by Unknown Author is licensed under CC BY-NC-ND
https://www.khanacademy.org/humanities/renaissance-reformation/early-renaissance1/sculpture-ar.
How does the National Society of Professional Engineers Code of Ethics.docxcliftonl1
How does the National Society of Professional Engineers Code of Ethics promote safety, health and welfare to the public? (2 - 3 paragraphs)
Solution
Preamble
Engineering is an important and learned profession. As members of this profession, engineers are expected to exhibit the highest standards of honesty and integrity. Engineering has a direct and vital impact on the quality of life for all people. Accordingly, the services provided by engineers require honesty, impartiality, fairness, and equity, and must be dedicated to the protection of the public health, safety, and welfare. Engineers must perform under a standard of professional behavior that requires adherence to the highest principles of ethical conduct.
I. Fundamental Canons
Engineers, in the fulfillment of their professional duties, shall:
Hold paramount the safety, health, and welfare of the public.
Perform services only in areas of their competence.
Issue public statements only in an objective and truthful manner.
Act for each employer or client as faithful agents or trustees.
Avoid deceptive acts.
Conduct themselves honorably, responsibly, ethically, and lawfully so as to enhance the honor, reputation, and usefulness of the profession.
II. Rules of Practice
Engineers shall hold paramount the safety, health, and welfare of the public.
much more ate web page
III. Professional Obligations
.
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
Neuro-symbolic is not enough, we need neuro-*semantic*Frank van Harmelen
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Essentials of Automations: Optimizing FME Workflows with Parameters
Bhutan code-of-ethics-for-engineers by ministry of works
1. Code of Conduct and Ethics for Engineers
Ministry of Works & Human Settlement Thimphu: Bhutan
2. Code of Conduct and Ethics for Engineers
Ministry of Works & Human Settlement Thimphu: Bhutan
○ ○ ○ ○ ○ ○ ○ ○ ○
Code of Conduct and Ethics
for
Engineers
MinistryofWorks&HumanSettlement
Thimphu:Bhutan
3. Code of Conduct and Ethics for Engineers
Ministry of Works & Human Settlement Thimphu: Bhutan 1
4. Code of Conduct and Ethics for Engineers
Ministry of Works & Human Settlement Thimphu: Bhutan
Definition:
Ethics is defined as a set of values,
rules, standards or moral principles that
govern the conduct of the individual or
member of a profession.
2
5. Code of Conduct and Ethics for Engineers
Ministry of Works & Human Settlement Thimphu: Bhutan
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Pledge:
We, the Engineers of Bhutan, in recognition
of the privilege and honor to serve the
Tsa Wa Sum, in recognition of the possibilities
of our technologies in affecting the quality
of life throughout the world, and in
acceptance of our personal obligation to the
profession, pledge to respect and abide by
the following ethics:
3
6. Code of Conduct and Ethics for Engineers
Ministry of Works & Human Settlement Thimphu: Bhutan
a. Responsibility and Obligation towards the Engineering
Profession.
b. ResponsibilityandObligationtowardsPublic,Employers
and Clients.
c. Responsibility forHuman Society’sWelfare, Safety and
Health.
d. Responsibility for Research and Professional
Development.
e. Responsibility to Preserve and Protect the Natural
Environment.
f. Responsibility to Preserve and Promote Cultural and
TraditionalValues.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
4
7. Code of Conduct and Ethics for Engineers
Ministry of Works & Human Settlement Thimphu: Bhutan 5
(A)
Responsibility and Obligation Towards
the Engineering Profession.
8. Code of Conduct and Ethics for Engineers
Ministry of Works & Human Settlement Thimphu: Bhutan
A1. Engineers shall not knowingly act in a manner which will be derogatory
to the honor, integrity, or dignity of the engineering profession or
knowingly engage in business or professional practices of a fraudulent,
dishonest or unethical nature.
A2. Offer services, opinions and advice on or undertake engineering
assignments only in areas of their competence and field of specialization
in a careful and diligent manner.
A3. Report to concerned agencies any illegal or unethical engineering
decisions or practices of engineers or others.
A4. An engineer shall prevent his/her personal or political involvement from
influencing or compromising their professional role or responsibility.
A5. An engineer must safeguard his professional independence at all times
and avoid any situation which would put him in conflict of interest.
A6. An engineer must respect the secrecy of all confidential information
obtained in the practice of his profession, unless otherwise approved by
law or client.
A7. An Engineer shall not participate or contribute to the illegal practice of
profession.
A8. An engineer shall not take upon himself the credit for engineering work
which belongs to a colleague or other group.
A9. An engineer must honestly and truthfully share the knowledge and
experience gained during the practice of the profession.
A10. Engineers shall not participate in the dissemination of untrue, unfair or
exaggerated statements regarding engineering.
A11. Engineers shall be objective and truthful in professional reports,
statements, or testimony.
A12. Engineers shall not maliciously or falsely, directly or indirectly, injure the
professional reputation, prospects, practice or employment of another
engineer or indiscriminately criticize another’s work.
6
9. Code of Conduct and Ethics for Engineers
Ministry of Works & Human Settlement Thimphu: Bhutan
(B)
Responsibility and Obligation Towards
Public, Employers and Clients.
7
10. Code of Conduct and Ethics for Engineers
Ministry of Works & Human Settlement Thimphu: Bhutan
B1. Engineers shall not accept professional employment outside of their regular
work or interest without the knowledge of their employers.
B2. Engineers shall not use any confidential information as a tool for personal
gain if such action affects the interests of the public, clients or the
employers.
B3. Engineers shall act as an honest agent or trustee of the employer or client
in regard to engineering and technical matters.
B4. Engineers shall maintain a fair and impartial attitude towards the public,
employers and clients.
B5. Engineers shall, in the practice of his/her profession, subordinate his
personal interest to that of his employer or clients.
B6. Engineers shall conduct themselves with fairness, and good faith towards
clients, colleagues and others, give credit where it is due and accept, as
well as give, honest and fair professional criticism.
B7. Engineers shall advocate and practice the judicious use of resources
belonging to public, employers or clients.
8
11. Code of Conduct and Ethics for Engineers
Ministry of Works & Human Settlement Thimphu: Bhutan
(C)
Responsibility for Human Society’s
Welfare, Safety and Health.
9
12. Code of Conduct and Ethics for Engineers
Ministry of Works & Human Settlement Thimphu: Bhutan
C1. Engineers shall not make any engineering judgments, decisions and adopt
practices that are detrimental to the welfare, safety and health of the general
public.
C2. Engineers shall inform, communicate and educate the society on the issues
of engineering that may be detrimental to the health and safety of the
general public.
C3. Engineers shall work for the enhancement of safety, health, and the social
welfare of both their local and the global community through the practice of
sustainable development.
C4. Engineers shall strive at all times to improve the living condition of the
people in the society by providing low-cost housing, clean drinking water,
safe electricity, convenient roads and other infrastructural requirements.
C5. During national disasters or emergencies, engineers shall make their
knowledge, services and skills freely available when called upon to help
and alleviate conditions of the affected members of the society.
C6. Engineers shall not adopt, advocate or practice any form of construction or
the use of construction materials that would directly or indirectly affect the
health and the safety of the users and the community.
10
13. Code of Conduct and Ethics for Engineers
Ministry of Works & Human Settlement Thimphu: Bhutan
(D)
Responsibility for Research and
Professional Development.
11
14. Code of Conduct and Ethics for Engineers
Ministry of Works & Human Settlement Thimphu: Bhutan
D1. Engineers shall keep themselves informed in order to maintain their
competence, strive to advance the body of knowledge within which they
practise and provide opportunities for the professional development of the
subordinates and fellow practitioners.
D2. Engineers shall strive to acquire knowledge and skills through appropriate
research endeavors aimed at advancing the technology for the sake of
mankind and his environment.
D3. Engineers shall be aware of the global technological changes, but adapt,
synthesize and implement to cater to the local needs.
D4. Engineers while duly publishing their professional experiences in any kind
of print media shall not practise any form of plagiarism.
D5. Engineers shall endeavor to conduct researches in the various fields of
engineering that are truly pertinent to the interest and the benefit of the
country and its people.
D6. Engineers while representing their country or a society or any organization
at an international or national forum, must not conduct, both personally
and professionally, in a manner that is derogatory to the prestige of the
country, its people and the organization being represented.
12
15. Code of Conduct and Ethics for Engineers
Ministry of Works & Human Settlement Thimphu: Bhutan 13
(E)
Responsibility to Preserve and Protect
the Natural Environment.
16. Code of Conduct and Ethics for Engineers
Ministry of Works & Human Settlement Thimphu: Bhutan
E1. Engineers should be committed to improving the environment by
adherence to the principles of sustainable development so as to enhance
the quality of community and global life.
E2. Engineers shall respect and work with nature and the global environment
for the sustainable development of mankind.
E3. Engineers shall reject any kind of action that involves unfair damages to
human surroundings and nature, and aim for the best possible technical,
social and political solution.
E4. Engineers shall strive to accomplish the useful objectives with the lowest
possible consumption of raw materials and energy and the lowest
production of wastes and any kind of pollution.
E5. Engineers shall study thoroughly the environment that will be affected,
assess all the impacts that might arise in the structure, dynamics and
aesthetics of the ecosystems involved, urbanized or natural, and select
the best alternative for development that is both environmentally sound
and sustainable.
E6. Engineers shall adopt environment-friendly methods of construction,
production and practice, including the safe and hygienic disposal of
hazardous wastes.
14
17. Code of Conduct and Ethics for Engineers
Ministry of Works & Human Settlement Thimphu: Bhutan
(F)
Responsibility to Preserve and Promote
Cultural and Traditional Values
15
18. Code of Conduct and Ethics for Engineers
Ministry of Works & Human Settlement Thimphu: Bhutan
F1. Engineers shall endeavor to preserve and promote the national culture and
tradition during the course of professional practice.
F2. Engineers shall, wherever possible, incorporate the designs and drawings
aimed at promoting the rich cultural and architectural heritage of the nation.
F3. Engineers shall strive to preserve, promote and improve the traditional arts
and crafts- Zorig Chusum, through the use of modern technology and
appropriate research activities.
F4. Engineers shall strive to give due regard and respects to the spiritual objects
of veneration and must endeavor at all times to preserve them.
F5. Engineers shall not undertake any professional or non-professional
activities that would endanger the spiritual, cultural and social values of the
nation.
F6. Engineers shall work hand-in-hand with the traditional artisans and
craftsmen/craftswomen as and when the situation demands and must duly
respect and regard them.
16
19. Code of Conduct and Ethics for Engineers
Ministry of Works & Human Settlement Thimphu: Bhutan
References:
The World Federation of Engineering Organization (WFEO)
Codes of Ethics.
The Japan Society of Civil Engineers(JSCE) Code of Ethics.
The American Society of Civil Engineers (ASCE) Code of
Ethics.
National Society of Professional Engineers (NSPE) Code of
Ethics.
Code of Ethics, The Institution of Engineers, Australia.
Professional Engineers(Code of Professional Conduct &
Ethics) Rules, Singapore.
American Council of Engineering Companies Ethical
Guidelines.
Code of Ethics of the Order of Quebec Engineers (OIQ)
TheAmerican Society of Mechanical Engineers (ASME) Code
of Ethics.
The Institute of Electrical & Electronics Engineers (IEEE) Code
of Ethics.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
17
20. Code of Conduct and Ethics for Engineers
Ministry of Works & Human Settlement Thimphu: Bhutan