Azat Amirov is a Kazakh citizen seeking a new position. He has over 10 years of experience in mechanical maintenance and field operations for oil and gas companies. He holds certificates in QHSE, sonde maintenance, and other industrial skills. His aim is to take on responsibilities with management trust, pursue qualification development, and gain financial independence through loyalty and initiative.

1. Amirov Azat Aibatovich
West Kazakhstan, Aksai city
Tel: +7 777 143 13 66
@-mail: aamirov3@gmail.com
azat_amirov90@mail.ru
About me: Kazakh, citizen of RK, single, 24-July-1990
Education: 2007-2011 West Kazakhstan Agrarian-Technological
University of Zhangir khan, faculty of machine building
Technological machines and the equipments;
(I was A’ grade pupil, received the raised grant)
2011-2016 Moscow State University of Gubkin
Management faculty, Manufacturing Management (distance education)
Knowledge of languages: Kazakh (toque), Russian (fluently), English (technical and colloquial)
PC skills: Microsoft Office 2010, AutoCAD, PhotoShop, Internet Explorer, Outlook, etc.
Experience:
June, 2016 - Till now
Baker Hughes Inc, Coiled Tubing Pressure Pumping
Supervisor (Field Specialist 2), include the Telecoil Specialist
Location: Kazakhstan, Aksai, client KPO(Karachaganak)
* Operate all coiled tubing equipment;
* Responsible for rig up and rig down, connecting discharge line with cementing unit and
wellhead fittings;
* Carry on pressure test of low and high pressure lines;
* Performs preventive routine service of the service machines and units;
* Pinpoints causes of field coiled tubing jobs and hydraulic fracturing and take corrective
actions on eliminating them;
* Equipment reporting (Check lists, Inventory list and etc.);
* Carry out loading of equipment and chemicals and transport them to well site;
* Drive company vehicles and bear responsibility for serviceability of the vehicles/equipment
assigned and availability of appropriate documentation;
* Carry out load fastening and bear responsibility for the loads transported;
* Perform other tasks related to operations support upon the order of higher management;
* Go to business trips related to operations upon request of the management if required
operationally;
* Perform any works/tasks in accordance with the company’s procedures and standards;
* Notify immediate supervisor of any incidents and situations assessed as unsafe and/or
inappropriate;
* Takes part in pre-job Safety meetings, discussing all safety related issues;

2. QHSE Functions:
* Ensure full awareness of and compliance with, the requirements of all relevant Company /
customer;
* QHSE Standards, Standard Practices, HSE
* Handbooks and emergency response procedures.
* Actively ensure that his/her own health and safety, and the health and safety of all fellow
workers or other workers are preserved at all times;
* Participate in the process of accomplishing goals and objectives established by Country
Manager;
* Have the right to stop any work they deem unsafe and suspend any employee from work, if their
presence may jeopardize the safety of other employees on the work site;
* Participate in emergency response drills when they are carried out on their facility;
* Operate the equipment assigned to me in accordance with applicable QHSE Standards,
Standard Practices and Manufacturer’s recommendations;
* Attend and take active part in safety meetings, pre-job / tailgate meetings;
* Assess hazards and risks prior to performing work.
April, 2016 – May, 2016
Baker Hughes Inc., PPS (Pipeline&Process Services)
Operator 3 lvl (III), (Hydro Test / Leak Test / Chemical Cleaning/Pipeline)
Location: Kazakhstan, Aksai, client KPO (Karachaganak)
* Understand Permit to Work systems. Raise permit, act as performing authority;
* Reading P&IDs and isometric drawings;
* Knowledge of air and diesel driven pumps operation;
* Masspectrometr knowledge;
* Rig up / down equipment, and carry out/supervise pre job checks in compliance
with job specific requirements, HSE procedures, and Permit to Work systems;
* Carry out / supervise duties in the field using own initiative, or in accordance with
instructions issued by the Project Coordinator / Senior Service Supervisor;
* Hold Pre-Job Safety Meetings, Toolbox Talks and Shift Handovers relating to the
work scope (Help or replace supervisor);
* Equipment rig up, function test, maintenance, and fault reporting / rectification,
gas log reporting;
* Mixing of chemicals (Helium, Foam);
* Assist to site personnel to ensuring safe performance of operations and in
minimizing risks of accidents and incidents; if necessary consult site personnel in
HSE issues within his competence;
January, 2012 – Febrary, 2016
Schlumberger Logelko Inc., Wireline
Maintenance Mechanical Technician
2012 – Aktau base, client Maersk, Exxon
2013-2014 – Tengiz, client TCO (Chevron)
2015-2016 – Aksai, client KPO (Karachaganak), Zhayikmunai

3. * The important role of maintaining the reliability of our equipment;
* Responsible for doing modifications on corrective and preventive maintenance, to
minimize the failures in electric and mechanical equipment in order to prevent either
lost time or poor quality data by ensuring that their assigned equipment is
maintained as per Segment standards;
* Assists in the development and coaching of less senior Technicians;
* Identifies opportunities through prescribed continuous improvement tools and
implements improvement plans and follows up;
*Repairs, modifies and rebuilds hydraulic and mechanical sections of logging tools
and performs mechanical and electrical maintenance on down-hole adapters,
swivels, and centralizers;
* Planning maintenance service;
* Constantly work on optimizing the work process, enhancing its productiveness and
performance;
January, 2010 – January, 2012
LLC “Special Technical Service”, position: Mechanical-Specialist, then Supervisor
January, 2010 - August, 2010 -Karachaganak field, KPC, Unit-4, Mechanic
September, 2010 - May, 2011 - West Eskene Development Project ''Karabatan'',
Mechanical Specialist
June, 2011 – January, 2012 - Karachaganak field, ECO-center (GPI), Supervisor
* Starts of turbines, pumps, and compressors etc.
* Check of conformity of a premise, a platform to service conditions and correctness
placing of the equipment, its connection to the electric network and other engineering
systems necessary for maintenance of work;
* Check of completeness of the equipment, density of connection of knots and
elements;
* Equipment inclusion, installation of control systems parameters, checking in
various operating modes;
* Laser alignment coupling. Motor (Nuovo Pignone)-Pump. With the help of high-
precision equipment ROTOLIGN PRO (Germany) and OPTOLIGN PRO (Germany);
* Measuring the distance of half coupling with the calipers;
* Checking of shaft alignment, laser adjustment of shaft, adjustment alignment
mirrors of flange connection;
* Alignment of flange;
* Cording control bolting;
* Diagnostics of a technical condition of equipment;
* Measure temperature on the working electric motor;
* Malfunction definition, repair or replacement of the failed knots and equipment
details;

4. June – august, 2009
Manufacturing practice in “Karachaganak Petroleum Operating B.V. Kazakhstan
Branch”, Unit-4, KPC
Position: Inspector QC – assistant (service and commission works)
* Study of the executed works of contractors and grant of complete information about
the done work;
May – September, 2008
Manufacturing practice in OJC”AksaiGazServis”
Position: Instrumental engineer - assistant
* Measure temperature on the working electric motor;
* Diagnostics equipment automation;
* Adjustment of the monitoring system of vibration;
* Installation and service of instrumental;
Certificates:
* QHSE 2 Course for Supervisors (May, 2014 Shlumberger, Almaty, KZ);
* Commentary Task Assessment Coacher (Schlumberger, Tengiz, KZ, 2013);
* Basic Sonde Maintenance Course
(Schlumberger, Kellyville Learning Center at USA, Nov-2013);
* Sonde Maintenance Course GTS-2A
(Schlumberger, Middle East Learning Center at Abu Dhabi, UAE, Oct-2014)
* Loss Prevention Team Leader – locally presented (Tengiz, KZ, 2014);
* All industrial needed certificates for permit to work in Kazakhstan and etc…
Aim: Personal qualities:
* Trust of management; * Quick learner;
* Qualification development; * Able to work under pressure;
* Financial independence; * Skill to communicate;
* Loyalty, Initiative;
* Accountability;
* Willing to work with other, take
their advice, use it accordingly & not
cause problem;
Additional information:
Have a recommendation letters from ''AGIP KCO'', ''Bonatti'',
‘’Schlumberger’’, “Baker Hughes” and ''KPO B.V.'' Driver license “B” and “C”.
Yours faithfully, Azat Amirov!