The document proposes the design and fabrication of an automatic side stand system for two-wheelers. The system uses a slow speed DC motor, limit switch, push button, stopper, and relay to automatically retract the side stand when the vehicle is started. This helps eliminate human error and reduces risks by ensuring the side stand is lifted before driving. Some key advantages are improved safety, low maintenance, and increased customer satisfaction by removing the need to manually operate the side stand.

1. Robust challenger
Automatic side stand system
Internal guide :
Mr. Aruno xavier (HOD mech)

2. AUTOMATIC SIDE STAND
FOR TWO WHEELERS
 BY
 THANU PILLAI
 NAGARAJAN
 SIVA RETHNAM
 AMALA RAJAN
 SIVA PRASANTH

3. ABSTRACT
 DESIGN AND FABRICATION OF AUTOMATIC
SIDE STAND SYSTEM
 Design and fabrication automatic side stand
system in two wheelers, auto safety start system
consists of Side stand lift system.
 When the starter button is push on, the side
stand gets lifted by means of electric lifter.
 This system is very useful for automation and
safety for the two wheeler users.

4.  TYPES OF EXISTING SIDE-STAND :
MANUAL STAND Manually operated
STANDS WITH INDICATORS Indicate position of Side-stand
STANDS WITH SPRINGS Retraction caused by spring

5. Manually operated
Retraction caused by spring
Indicate position of side stand

6.  DISADVANTAGES OF EXISTING
SIDE-STANDS :
 Accident prone
 Maximum Fatigue
 Only indicate the position

7.  INVENTION :
 Automatic side - stand
 Revolutionary product
 Self-retracting
 Human- Error Nullified
 Realization not required

8.  FUNCTIONING :
• Vehicle switched ‘ON’
• Side-Stand Retracts Automatically
• User ‘SAFE’ for action

9. Components of automatic
side stand system
1. Battery
2. Slow speed dc motor
3. Limit switch
4. Push button
5. Stopper
6. Side stand
7. Relay

10. 12v battery
It is used to supply 12v dc to motor

11. 12 v dc gear motor
•Motor is used to convert electrical energy to
mechanical energy
•Gear is used for speed reduction (worm gear)

12. Limit switch
A limit switch is configured to detect when a system's
element has moved to a certain position. A system operation
is triggered when a limit switch is tripped.

13. push button switch
Pushbutton switches are mechanical switch

14. Stopper
•Stopper is nothing but a rigid body
•It is used to stop the motion of stand in
certain limit

15. RELAY
It is used to change the direction of the motor.

16. WORKING PRINCIPLE
When the starter button was pressed electric circuit closed and
the electric gets power. Then the electric motor rotates and gives
pushing force to the stand, which lifts the stand.
When it touch or press the limit switch the power supply for the
forward direction of the motor is cut . At the same time reverse
direction power will supply when we pressed the push button.
If the push button was pressed the electric motors turns in
opposite direction which pulls the side stand and keep in original
position.

18.  ADVANTAGES OF INTRODUCTION :
Customer safety
Can form as a ‘Standard Feature’
Marginal increase in cost
Improved sales : To face competition.
Ergonomic friendly
Low maintenance : Can be repaired locally

19.  Comparison of Features:
PARTICULARS EXISTING SIDE STANDS INVENTED SIDE STAND
MANUAL YES AUTOMATIC
AUTOMATIC RETRACTION NO YES
HUMAN ERROR HIGH ELIMINATED
MAINTENANCE LOW LOW
STURDINESS STABLE STABLE
COST AVERAGE BELOW AVERAGE
CUSTOMER SATISFACTION AVERAGE GURANTEED
RISK FACTOR HIGH ELIMINATED
ERROR ELIMINATION NOT CONSIDERED TAKEN UNDER CONSIDERATION
MANUFACTURING OF
WITH EASE WITH EASE
SPARES
MARKET CAPTIVITY - IMPROVED SALES
TECHNOLOGY CUSTOMARY REVOLUTIONARY / UNIQUE
COMFORT IN USUAGE COMFORTABLE HIGHLY COMFORTABLE