Automatic Sharpener Project
•Download as PPTX, PDF•
0 likes•57 views
The document describes an automatic pencil sharpener project created by Group 2. The automatic sharpener uses an Arduino Uno, ultrasonic sensor, DC motor, relay PCB, batteries, and jumper cables to quickly and automatically sharpen pencils, making the process easier for users. The project includes components, scripts, block diagrams created in LabVIEW, and a conclusion stating that Arduino can accept sensor input and control outputs like motors.
Report
Share
Report
Share
Recommended
Obstacle detctor
This document describes an obstacle avoiding robot with a vacuum cleaner. The robot uses IR sensors and a microcontroller to detect obstacles and navigate around them while using a blower to function as a vacuum cleaner. It discusses the components, circuit diagram, software, applications and future enhancements such as adding a camera to increase range or modifying it to function as a firefighting robot. The goal is to create a robot that can autonomously clean an area while avoiding obstacles.
OBSTACLE AVOIDING CAR
This document describes an obstacle avoiding car project created by Utkarsh Bingewar, Shubham Thakur, and Rupesh Rote, with guidance from their assistant professor Mrs. Varsha Nanaware. The car uses an ultrasonic sensor and Arduino board to detect obstacles and navigate around them. When an obstacle is detected, the Arduino controls the motors to turn the car left or right to avoid the obstacle. The obstacle avoiding car has applications in areas like surveillance, hazardous environments, and unmanned vehicle navigation.
Introduction to robotics2
This document provides an introduction to robotics and microcontrollers like Arduino. It defines a robot as a device that can substitute for humans in places they cannot access, and lists common types as industrial automatons, humanoids, and AI bots. The document explains that robots work by sensing their environment, processing the situation, searching for rules to manipulate it, executing rules, and surviving changing conditions via a microcontroller brain. It provides examples of microcontroller manufacturers and describes the Arduino open-source hardware and software platform. Finally, it gives a basic line-following robot example to illustrate robot programming concepts.
Robot
An industrial robotic arm has several main components: a controller that acts as the "brain" and runs programs to operate the robot; an arm that positions the end effector using joints like shoulders, elbows, and wrists; an end effector like a gripper or vacuum that interacts with objects; drives like hydraulics, electrics, or pneumatics that power movement of the arm links; and sensors that provide feedback to the controller about the robot's environment.
Obstacle avoiding robot
ECWAY TECHNOLOGIES
IEEE PROJECTS,HARDWARE & SOFTWARE DEVELOPMENTS
OUR OFFICES @ CHENNAI / TRICHY / KARUR / ERODE / MADURAI / SALEM / COIMBATORE
BANGALORE / HYDRABAD
CELL: +91 98949 17187, +91 875487 1111 / 2111 / 3111 / 4111 / 5111 / 6111 / 8111
Mail to: ecwaytechnologies@gmail.com | ecwayembedded@gmail.com
VISIT: www.ecwaytechnologies.com | www.ecwayprojects.com
Pick and Place Robotic Arm 1
This presentation is base on Pick and Place Robotic Arm. Which is use in industrial automation or we can say its makes industries automatic. In this slides we are include what ever parts require and working of servo motor. Also discuss about structure of our robotic Arm.
HAND GESTURE CONTROLLED WHEEL CHAIR
This project is to develop a wheel chair for physically disabled people
The wheel chair is controlled by hand movement/hand gestures
The gestures are recognized by an accelerometer sensor
An ultrasonic sensor is used to detect the obstacles in front of the chair
The signals from the sensors are processed, and the wheel chair is controlled by Atmega-328 micro controller
Real-time Obstacle Avoidance Algorithm for Mobile Robots
The document presents an obstacle avoidance algorithm for mobile robots that uses ultrasonic sensors to detect obstacles and then implements the Bug 1 and Bug 2 algorithms to navigate around obstacles in a reactive manner. It describes the Bug algorithms, compares Bug 1 and Bug 2, and discusses other algorithms like VFH and potential fields. Potential applications of obstacle detection algorithms discussed include mining vehicles, smart cars, and autonomous cleaning robots.
Recommended
Obstacle detctor
This document describes an obstacle avoiding robot with a vacuum cleaner. The robot uses IR sensors and a microcontroller to detect obstacles and navigate around them while using a blower to function as a vacuum cleaner. It discusses the components, circuit diagram, software, applications and future enhancements such as adding a camera to increase range or modifying it to function as a firefighting robot. The goal is to create a robot that can autonomously clean an area while avoiding obstacles.
OBSTACLE AVOIDING CAR
This document describes an obstacle avoiding car project created by Utkarsh Bingewar, Shubham Thakur, and Rupesh Rote, with guidance from their assistant professor Mrs. Varsha Nanaware. The car uses an ultrasonic sensor and Arduino board to detect obstacles and navigate around them. When an obstacle is detected, the Arduino controls the motors to turn the car left or right to avoid the obstacle. The obstacle avoiding car has applications in areas like surveillance, hazardous environments, and unmanned vehicle navigation.
Introduction to robotics2
This document provides an introduction to robotics and microcontrollers like Arduino. It defines a robot as a device that can substitute for humans in places they cannot access, and lists common types as industrial automatons, humanoids, and AI bots. The document explains that robots work by sensing their environment, processing the situation, searching for rules to manipulate it, executing rules, and surviving changing conditions via a microcontroller brain. It provides examples of microcontroller manufacturers and describes the Arduino open-source hardware and software platform. Finally, it gives a basic line-following robot example to illustrate robot programming concepts.
Robot
An industrial robotic arm has several main components: a controller that acts as the "brain" and runs programs to operate the robot; an arm that positions the end effector using joints like shoulders, elbows, and wrists; an end effector like a gripper or vacuum that interacts with objects; drives like hydraulics, electrics, or pneumatics that power movement of the arm links; and sensors that provide feedback to the controller about the robot's environment.
Obstacle avoiding robot
ECWAY TECHNOLOGIES
IEEE PROJECTS,HARDWARE & SOFTWARE DEVELOPMENTS
OUR OFFICES @ CHENNAI / TRICHY / KARUR / ERODE / MADURAI / SALEM / COIMBATORE
BANGALORE / HYDRABAD
CELL: +91 98949 17187, +91 875487 1111 / 2111 / 3111 / 4111 / 5111 / 6111 / 8111
Mail to: ecwaytechnologies@gmail.com | ecwayembedded@gmail.com
VISIT: www.ecwaytechnologies.com | www.ecwayprojects.com
Pick and Place Robotic Arm 1
This presentation is base on Pick and Place Robotic Arm. Which is use in industrial automation or we can say its makes industries automatic. In this slides we are include what ever parts require and working of servo motor. Also discuss about structure of our robotic Arm.
HAND GESTURE CONTROLLED WHEEL CHAIR
This project is to develop a wheel chair for physically disabled people
The wheel chair is controlled by hand movement/hand gestures
The gestures are recognized by an accelerometer sensor
An ultrasonic sensor is used to detect the obstacles in front of the chair
The signals from the sensors are processed, and the wheel chair is controlled by Atmega-328 micro controller
Real-time Obstacle Avoidance Algorithm for Mobile Robots
The document presents an obstacle avoidance algorithm for mobile robots that uses ultrasonic sensors to detect obstacles and then implements the Bug 1 and Bug 2 algorithms to navigate around obstacles in a reactive manner. It describes the Bug algorithms, compares Bug 1 and Bug 2, and discusses other algorithms like VFH and potential fields. Potential applications of obstacle detection algorithms discussed include mining vehicles, smart cars, and autonomous cleaning robots.
Gesture control wheel chair 1
The document outlines a hand gesture controlled wheelchair. It includes the wheelchair architecture with a microcontroller, accelerometer, LCD display, and transmitter/receiver for wireless control. The software required is Atmel Studio 6 and USBasp driver. It includes block and circuit diagrams. Estimated total cost is around $3,630, with major expenses being the wheelchair frame at $2,000 and the accelerometer at $400. The wheelchair can be controlled wirelessly using hand gestures detected by the accelerometer to move forward, backward, left, or right.
Robotic hand
This document discusses the design and development of a robotic hand controlled by a glove. The robotic hand uses servos to mimic the motion of individual human fingers as controlled by sensors in the glove. It describes the components used - flex sensors in the glove, an Arduino microcontroller, and servos in the robotic hand. The document outlines the working principle and potential applications of this robotic hand system, such as in factories or for people with disabilities. It aims to develop a versatile robotic hand concept among business students.
IRJET- Development of Robotic Arm using Arduino and Matlab R2016a
This document describes the development of a robotic arm using Arduino and MATLAB R2016a. The robotic arm is controlled through a graphical user interface in MATLAB. Commands to move the arm left, right, up, down and to grip or release objects are sent from the GUI to an Arduino Uno board connected to the computer. A camera mounted on the arm allows the user to see the position of objects and guide movements. The arm uses three motors for accurate movement and an object detection system to facilitate pick and place tasks.
Robochair
This document presents a novel hands-free control system for intelligent wheelchairs using head gesture recognition. The system uses a webcam to capture facial images and integrates the Adaboost face detection algorithm and Camshift tracking algorithm to recognize head gestures in real-time. Five frontal gestures - center, up, down, left, right - are mapped to control commands like speed up, slow down, turn left, turn right to maneuver the wheelchair. The system was demonstrated to accurately recognize profile faces and control the wheelchair through various head gestures. This provides a robust hands-free interface for elderly or disabled users with limited mobility.
Robotics Safety
Industrial Robots are changing and this presentation leads the user to the tools to control the hazards of collaborative and non-collaborative robotics.
industrial robotic arm
This document describes the design and implementation of an industrial robotic arm controlled via Bluetooth using an Arduino board. The robotic arm consists of 3D printed parts, servo motors, and a Bluetooth module connected to the Arduino. It allows controlling the robotic arm's movements wirelessly using an Android phone to rotate four potentiometers and pick up objects. The proposed system aims to avoid the drawbacks of wired robotic arms by enabling wireless control via Bluetooth, reducing costs and space requirements compared to wired systems.
Automatic Collision Control System
The document describes an automatic collision control system created by students to prevent railway accidents. The system uses an Arduino Uno microcontroller and ultrasonic sensor to detect obstacles on the tracks. When an obstacle is detected within 20cm, an alarm is activated to alert passengers. If an obstacle is within 10cm, the train engine will shut off to prevent a collision. When the tracks are clear again, the train will restart automatically. The system is intended to significantly reduce the number of railway accidents and loss of life in India each year.
ctdt report
This document provides details about a project to create a smart wheelchair that can be controlled through hand gestures. A robotic arm is attached to the wheelchair to allow objects to be manipulated. The wheelchair and arm will be controlled by an Arduino using image processing of hand gestures from a camera. Inverse kinematics algorithms will be used to position the robotic arm. The project aims to help people with disabilities move freely and interact with objects.
Self Driving Technology
The presentation contains information about self driving car technology.Thank u for the support and if u have any suggestion regarding my presentation please give the feedback and don't forget to enter your comment on this presentation again THANK YOU...
Radar system using arduino
This document describes the design and implementation of a radar system using an Arduino. The system uses an Arduino Uno, ultrasonic sensor, servo motor, and other components to detect objects. It provides advantages such as seeing through fog or darkness and determining an object's range, position, and velocity. Limitations include not being able to distinguish close targets or recognize color. The system was created to learn about radar technology and demonstrate its uses and capabilities.
Hardware and software
The document describes the hardware and software used in the Shaver Technique. It lists specific blades, such as a double window blade and shark jaws blade, that are used. It also details the equipment needed, including a monitor, camera, light source, and motor drive units that can reach 5000 rpm or aspirate 1000 ml per minute. A single pedal is used to control both aspiration and the engine.
Landslide Detection using Arduino
This document describes a landslide detection system that uses sensors to monitor vibrations in the earth and detect humans. It uses a MEMS accelerometer sensor to detect landslide-level vibrations and a PIR sensor to detect humans. If both vibrations and a human are detected, an Arduino microcontroller activates a buzzer and sends a warning to an LCD display. The system aims to provide early warnings to save lives in the event of a landslide or other natural disaster.
Mainprojpresentation 150617092611-lva1-app6892
This document describes a vision assisted pick and place robotic arm guided by image processing concepts for object sorting. It discusses introducing a robotic arm that can pick objects from one location and place them in another using machine vision. The document covers key concepts like image acquisition, processing, object identification, and control signal transfer. It provides details on how a webcam captures images that are converted to grayscale and binary before edge detection and other processing to find object boundaries and centroids. Control signals are sent via an interface to guide the robotic arm based on image analysis. Potential applications and advantages like consistency and hazardous task handling are also summarized.
Industrial Robotics Chap 01 Fundamentals
The document provides an introduction to robotics, including definitions of key terms:
- A robot is an automatically controlled, reprogrammable device designed to perform tasks normally done by humans.
- Robots are classified based on their drive technology, work envelope/coordinate geometry, and motion control methods.
- Robotic systems have components like manipulators, end effectors, actuators, sensors, controllers, and software to allow various applications in manufacturing and other industries.
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks creates AI-boosted business software that helps employees work more efficiently and effectively. Managing data across multiple RDBMS and NoSQL databases was already a challenge at their current scale. To prepare for 10X growth, they knew it was time to rethink their database strategy. Learn how they architected a solution that would simplify scaling while keeping costs under control.
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
A Comprehensive Guide to DeFi Development Services in 2024
DeFi represents a paradigm shift in the financial industry. Instead of relying on traditional, centralized institutions like banks, DeFi leverages blockchain technology to create a decentralized network of financial services. This means that financial transactions can occur directly between parties, without intermediaries, using smart contracts on platforms like Ethereum.
In 2024, we are witnessing an explosion of new DeFi projects and protocols, each pushing the boundaries of what’s possible in finance.
In summary, DeFi in 2024 is not just a trend; it’s a revolution that democratizes finance, enhances security and transparency, and fosters continuous innovation. As we proceed through this presentation, we'll explore the various components and services of DeFi in detail, shedding light on how they are transforming the financial landscape.
At Intelisync, we specialize in providing comprehensive DeFi development services tailored to meet the unique needs of our clients. From smart contract development to dApp creation and security audits, we ensure that your DeFi project is built with innovation, security, and scalability in mind. Trust Intelisync to guide you through the intricate landscape of decentralized finance and unlock the full potential of blockchain technology.
Ready to take your DeFi project to the next level? Partner with Intelisync for expert DeFi development services today!
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Skybuffer AI, built on the robust SAP Business Technology Platform (SAP BTP), is the latest and most advanced version of our AI development, reaffirming our commitment to delivering top-tier AI solutions. Skybuffer AI harnesses all the innovative capabilities of the SAP BTP in the AI domain, from Conversational AI to cutting-edge Generative AI and Retrieval-Augmented Generation (RAG). It also helps SAP customers safeguard their investments into SAP Conversational AI and ensure a seamless, one-click transition to SAP Business AI.
With Skybuffer AI, various AI models can be integrated into a single communication channel such as Microsoft Teams. This integration empowers business users with insights drawn from SAP backend systems, enterprise documents, and the expansive knowledge of Generative AI. And the best part of it is that it is all managed through our intuitive no-code Action Server interface, requiring no extensive coding knowledge and making the advanced AI accessible to more users.
More Related Content
What's hot
Gesture control wheel chair 1
The document outlines a hand gesture controlled wheelchair. It includes the wheelchair architecture with a microcontroller, accelerometer, LCD display, and transmitter/receiver for wireless control. The software required is Atmel Studio 6 and USBasp driver. It includes block and circuit diagrams. Estimated total cost is around $3,630, with major expenses being the wheelchair frame at $2,000 and the accelerometer at $400. The wheelchair can be controlled wirelessly using hand gestures detected by the accelerometer to move forward, backward, left, or right.
Robotic hand
This document discusses the design and development of a robotic hand controlled by a glove. The robotic hand uses servos to mimic the motion of individual human fingers as controlled by sensors in the glove. It describes the components used - flex sensors in the glove, an Arduino microcontroller, and servos in the robotic hand. The document outlines the working principle and potential applications of this robotic hand system, such as in factories or for people with disabilities. It aims to develop a versatile robotic hand concept among business students.
IRJET- Development of Robotic Arm using Arduino and Matlab R2016a
This document describes the development of a robotic arm using Arduino and MATLAB R2016a. The robotic arm is controlled through a graphical user interface in MATLAB. Commands to move the arm left, right, up, down and to grip or release objects are sent from the GUI to an Arduino Uno board connected to the computer. A camera mounted on the arm allows the user to see the position of objects and guide movements. The arm uses three motors for accurate movement and an object detection system to facilitate pick and place tasks.
Robochair
This document presents a novel hands-free control system for intelligent wheelchairs using head gesture recognition. The system uses a webcam to capture facial images and integrates the Adaboost face detection algorithm and Camshift tracking algorithm to recognize head gestures in real-time. Five frontal gestures - center, up, down, left, right - are mapped to control commands like speed up, slow down, turn left, turn right to maneuver the wheelchair. The system was demonstrated to accurately recognize profile faces and control the wheelchair through various head gestures. This provides a robust hands-free interface for elderly or disabled users with limited mobility.
Robotics Safety
Industrial Robots are changing and this presentation leads the user to the tools to control the hazards of collaborative and non-collaborative robotics.
industrial robotic arm
This document describes the design and implementation of an industrial robotic arm controlled via Bluetooth using an Arduino board. The robotic arm consists of 3D printed parts, servo motors, and a Bluetooth module connected to the Arduino. It allows controlling the robotic arm's movements wirelessly using an Android phone to rotate four potentiometers and pick up objects. The proposed system aims to avoid the drawbacks of wired robotic arms by enabling wireless control via Bluetooth, reducing costs and space requirements compared to wired systems.
Automatic Collision Control System
The document describes an automatic collision control system created by students to prevent railway accidents. The system uses an Arduino Uno microcontroller and ultrasonic sensor to detect obstacles on the tracks. When an obstacle is detected within 20cm, an alarm is activated to alert passengers. If an obstacle is within 10cm, the train engine will shut off to prevent a collision. When the tracks are clear again, the train will restart automatically. The system is intended to significantly reduce the number of railway accidents and loss of life in India each year.
ctdt report
This document provides details about a project to create a smart wheelchair that can be controlled through hand gestures. A robotic arm is attached to the wheelchair to allow objects to be manipulated. The wheelchair and arm will be controlled by an Arduino using image processing of hand gestures from a camera. Inverse kinematics algorithms will be used to position the robotic arm. The project aims to help people with disabilities move freely and interact with objects.
Self Driving Technology
The presentation contains information about self driving car technology.Thank u for the support and if u have any suggestion regarding my presentation please give the feedback and don't forget to enter your comment on this presentation again THANK YOU...
Radar system using arduino
This document describes the design and implementation of a radar system using an Arduino. The system uses an Arduino Uno, ultrasonic sensor, servo motor, and other components to detect objects. It provides advantages such as seeing through fog or darkness and determining an object's range, position, and velocity. Limitations include not being able to distinguish close targets or recognize color. The system was created to learn about radar technology and demonstrate its uses and capabilities.
Hardware and software
The document describes the hardware and software used in the Shaver Technique. It lists specific blades, such as a double window blade and shark jaws blade, that are used. It also details the equipment needed, including a monitor, camera, light source, and motor drive units that can reach 5000 rpm or aspirate 1000 ml per minute. A single pedal is used to control both aspiration and the engine.
Landslide Detection using Arduino
This document describes a landslide detection system that uses sensors to monitor vibrations in the earth and detect humans. It uses a MEMS accelerometer sensor to detect landslide-level vibrations and a PIR sensor to detect humans. If both vibrations and a human are detected, an Arduino microcontroller activates a buzzer and sends a warning to an LCD display. The system aims to provide early warnings to save lives in the event of a landslide or other natural disaster.
Mainprojpresentation 150617092611-lva1-app6892
This document describes a vision assisted pick and place robotic arm guided by image processing concepts for object sorting. It discusses introducing a robotic arm that can pick objects from one location and place them in another using machine vision. The document covers key concepts like image acquisition, processing, object identification, and control signal transfer. It provides details on how a webcam captures images that are converted to grayscale and binary before edge detection and other processing to find object boundaries and centroids. Control signals are sent via an interface to guide the robotic arm based on image analysis. Potential applications and advantages like consistency and hazardous task handling are also summarized.
Industrial Robotics Chap 01 Fundamentals
The document provides an introduction to robotics, including definitions of key terms:
- A robot is an automatically controlled, reprogrammable device designed to perform tasks normally done by humans.
- Robots are classified based on their drive technology, work envelope/coordinate geometry, and motion control methods.
- Robotic systems have components like manipulators, end effectors, actuators, sensors, controllers, and software to allow various applications in manufacturing and other industries.
What's hot (14)
IRJET- Development of Robotic Arm using Arduino and Matlab R2016a
IRJET- Development of Robotic Arm using Arduino and Matlab R2016a
Recently uploaded
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks creates AI-boosted business software that helps employees work more efficiently and effectively. Managing data across multiple RDBMS and NoSQL databases was already a challenge at their current scale. To prepare for 10X growth, they knew it was time to rethink their database strategy. Learn how they architected a solution that would simplify scaling while keeping costs under control.
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
A Comprehensive Guide to DeFi Development Services in 2024
DeFi represents a paradigm shift in the financial industry. Instead of relying on traditional, centralized institutions like banks, DeFi leverages blockchain technology to create a decentralized network of financial services. This means that financial transactions can occur directly between parties, without intermediaries, using smart contracts on platforms like Ethereum.
In 2024, we are witnessing an explosion of new DeFi projects and protocols, each pushing the boundaries of what’s possible in finance.
In summary, DeFi in 2024 is not just a trend; it’s a revolution that democratizes finance, enhances security and transparency, and fosters continuous innovation. As we proceed through this presentation, we'll explore the various components and services of DeFi in detail, shedding light on how they are transforming the financial landscape.
At Intelisync, we specialize in providing comprehensive DeFi development services tailored to meet the unique needs of our clients. From smart contract development to dApp creation and security audits, we ensure that your DeFi project is built with innovation, security, and scalability in mind. Trust Intelisync to guide you through the intricate landscape of decentralized finance and unlock the full potential of blockchain technology.
Ready to take your DeFi project to the next level? Partner with Intelisync for expert DeFi development services today!
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Skybuffer AI, built on the robust SAP Business Technology Platform (SAP BTP), is the latest and most advanced version of our AI development, reaffirming our commitment to delivering top-tier AI solutions. Skybuffer AI harnesses all the innovative capabilities of the SAP BTP in the AI domain, from Conversational AI to cutting-edge Generative AI and Retrieval-Augmented Generation (RAG). It also helps SAP customers safeguard their investments into SAP Conversational AI and ensure a seamless, one-click transition to SAP Business AI.
With Skybuffer AI, various AI models can be integrated into a single communication channel such as Microsoft Teams. This integration empowers business users with insights drawn from SAP backend systems, enterprise documents, and the expansive knowledge of Generative AI. And the best part of it is that it is all managed through our intuitive no-code Action Server interface, requiring no extensive coding knowledge and making the advanced AI accessible to more users.
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
GNSS spoofing via SDR (Criptored Talks 2024)
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Folding is a recent technique for building efficient recursive SNARKs. Several elegant folding protocols have been proposed, such as Nova, Supernova, Hypernova, Protostar, and others. However, all of them rely on an additively homomorphic commitment scheme based on discrete log, and are therefore not post-quantum secure. In this work we present LatticeFold, the first lattice-based folding protocol based on the Module SIS problem. This folding protocol naturally leads to an efficient recursive lattice-based SNARK and an efficient PCD scheme. LatticeFold supports folding low-degree relations, such as R1CS, as well as high-degree relations, such as CCS. The key challenge is to construct a secure folding protocol that works with the Ajtai commitment scheme. The difficulty, is ensuring that extracted witnesses are low norm through many rounds of folding. We present a novel technique using the sumcheck protocol to ensure that extracted witnesses are always low norm no matter how many rounds of folding are used. Our evaluation of the final proof system suggests that it is as performant as Hypernova, while providing post-quantum security.
Paper Link: https://eprint.iacr.org/2024/257
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Recently uploaded (20)
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
A Comprehensive Guide to DeFi Development Services in 2024
A Comprehensive Guide to DeFi Development Services in 2024
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
WeTestAthens: Postman's AI & Automation Techniques
WeTestAthens: Postman's AI & Automation Techniques
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Automatic Sharpener Project
- 1. INSTRUMENTPROJECT AUTOMATIC SHARPENER GROUP 2 Annisa Dwi Zahra Sudarsono 181611035 Farhan Ar-Rasyid 181611039 Rahmayani Purwati 181611053 Rifqi 181611056
- 2. Automatic Sharpener has a purpose to make it easier for people. sharpener that works automatically, quickly and makes sharp pencils.
- 3. COMPONENT Arduino Uno Sensor Ultrasonik Kabel jumper Motor DC Battery Relay PCB Sharpener
- 9. CONCLUSION in conclusion arduino has many uses, one of which accepts input from sensors that are controlled by arduino, which produces an output that is a rotating motor