ATIs-B12-2-Wire-Gas-Transmitter-Support-Drawings.pdf

•

0 likes•3 views

www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường. Chuyên cung cấp vật tư cho dự án xử lý nước sạch, nước thải và môi trường. Envimart luôn đồng hành, tin cậy với đối tác nhà thầu, nhà tích hợp và người sử dụng.

Series B12 2-Wire Transmitter -
Page 1 of 7
B12 SENSOR / TRANSMITTER
B12 SENSOR / TRANSMITTER - EXPLOSION-PROOF
2.88"
73mm
3.75"
95mm
4.73"
120mm
6.07"
154mm
.75"
19mm
3/4" NPT
3/4" NPT
File: SS-B12RH.P65, REV-H, DATE: 5/28/10
1) Enclosure Ratings:
CLASS I, GROUPS B,C,D
CLASS II, GROUPS E,F,G
CLASS III
2) Assembly is normally mounted directly to suitable explosion-proof conduit.
3) To maintain the integrity of the transmitter, explosion-proof conduit and cable
entry seals are required by local electrical codes.
4) Remote C10 Sensor is dimensionally the same as the standard version. Cable
length is specified by customer. Dual condulet required for installation.
Dimensional
1) Enclosure Ratings:
Nema-4X / IP 66
2) Enclosure Material:
Polystyrene base and cover,
Standard Gray
3) Knockouts:
Pg 11 (.75" dia.)
Pg 16 (.90" dia.)

Series B12 2-Wire Transmitter -
Page 2 of 7
1.025"
26mm
1.5"
38mm
Pg16 THREAD
LOCKNUT
SEAL RING
2.0"
51mm
1.025"
26mm
2.60"
66mm
G10 SENSOR
GAS SPECIFIC
A10 SENSOR
GAS SPECIFIC
C10 EXPLOSION-PROOF SENSOR
GAS SPECIFIC
LENGTH IS
CUSTOMER
SPECIFIED
GAS SENSORS
A10 REMOTE SENSOR
GAS SPECIFIC
SS-B12RH, (5/10)
Support Data
C10 LEADED EXPLOSION-PROOF
SENSOR
GAS SPECIFIC

Series B12 2-Wire Transmitter -
Page 3 of 7
SS-B12RH, (5/10)
B12 w/ A10 SENSOR CALIBRATION ADAPTER
ATI-0467
B12 w/ A10 SENSOR FLOWCELL ASSEMBLY
ATI-0468
General Diagrams

Series B12 2-Wire Transmitter -
Page 4 of 7
SS-B12RH, (5/10)
X-PROOF TRANSMITTER w/ C10 SENSOR CALIBRATIONADAPTER
ATI-0466
XPROOF TRANSMITTER w/ C10 SENSOR FLOWCELL ASSEMBLY
ATI-0465
General Diagrams

Series B12 2-Wire Transmitter -
Page 5 of 7
CABLE GLAND INSTALLATION NOTES
1) Mount Transmitter to wall with screws inserted
in blind mounting holes, (accessible with cover
removed.
2) Cable gland supplied uses Pg 11 knockout.
Use extreme care in removing knockout.
Score inside of concentric knockout with razor
knife.
3) Sun shade is recommended for outdoor
applications.
REMOVING KNOCKOUTS
CONDUIT MOUNT INSTALLATION
1) To remove knockouts, place a thin bladed
screwdriver into the circular slot or the desired
knockout size and tap firmly with a hammer.
2) Remove Transmitter PCB prior to removing
knockouts, to prevent damage to the PCB.
1) Transmitter may be supported by conduit or
screwed to wall through blind mounting holes.
2) Sun shade is recommended for outdoor
applications.
CABLE GLAND SUPPLIED BY ATI
FROM RECEIVER
½" CONDUIT ADAPTOR
SUPPLIED
CONDUIT ENTRY MUST
BE SEALED WATER-TIGHT
½" CONDUIT
SS-B12RH, (5/10)
Installations

Series B12 2-Wire Transmitter -
Page 6 of 7
Support Data
ATI-0348
B12/G10 Insertion Sensor (Customer Wiring)
SS-B12RH, (5/10)

Series B12 2-Wire Transmitter -
Page 7 of 7
G10 INSERTION PROBE (SENSING POSITION)
ATI-0298
G10 INSERTION PROBE (CALIBRATION POSITION)
1) To place sensor into the Calibration position, slowly back the sensor out of the housing, until you here a click
and the sensor doesn't move any more. The sensor is now positioned to be calibrated. Attach tubing to barb
fitting, and proceed with calibration. When calibration is complete, the sensor is now ready to be placed back
into the sensing position. To do this pull up on the locking pin, and slide the sensor in a little bit release the
pin,then continue to slide the sensor all the way into the pipe. The sensor is now in operation again.
ATI-0299
Support Data
SS-B12RH, (5/10)

CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas) Cable Gland Size 20S (M20) 1/2" NPT Entry Thread Standard, 3/4" NPT Optional Cable Gland Suits Cable Diameters 9.5mm-15.9mm CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access. Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA) Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.

CMP PX2K & PXSS2K Barrier Cable Glands, Flameproof Exd and Increased Safety Exe

Thorne & Derrick International

CMP PX2K Barrier Cable Glands (ATEX Certified) for Hazardous Areas Zone 1, Zone 2, Zone 21, Zone 22 (Flameproof Exd) Cable Termination CMP PX2K Triple Certified Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’) barrier gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 hazardous areas - suitable with all types of armoured cable providing a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. CMP PX2K barrier cable glands are ATEX certified for use with equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound barrier glands for cable terminations within ATEX hazardous areas areas are supplied with a "universal" reversible armour clamp to suit all types of armoured cable termination - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. CMP PXSS2K barrier cable glands are Class I Division 2 ABCD approved for use with non-armoured marine and tray cable (type TC) providing a compound barrier seal around the cable conductors and an environmental seal on the cable outer jacket - the PXSS2K barrier glands are IP68 rated. CMP PX2K and PXSS2K barrier cable glands provide mechanical cable retention - a combined detachable spacer and compound tube allows the cable to be easily disconnected from the equipment for maintenance. This feature also facilitates remote make off procedures when the barrier termination is to be conducted in confined spaces.

CMP PX2K-40 Barrier Glands Exd Flameproof (ATEX) Cable Glands

Thorne & Derrick International

CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas) Cable Gland Size 40 (M40) 1.1/4" NPT Entry Thread Standard, 1.1/2" NPT Optional Cable Gland Suits Cable Diameters 27.9mm-40.4mm CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access. Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA) Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.

CMP PX2K-20S/16 Barrier Glands Exd Flameproof (ATEX) Cable Glands

Thorne & Derrick International

CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas) Cable Gland Size 20S/16 (M20) 1/2" NPT Entry Thread Standard, 3/4" NPT Optional Cable Gland Suits Cable Diameters 6.1mm-11.5mm CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access. Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA) Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.

CMP PX2K-50S Barrier Glands Exd Flameproof (ATEX) Cable GlandsThorne & Derrick International

CMP PX2K-20 Barrier Glands Exd Flameproof (ATEX) Cable Glands

Thorne & Derrick International

CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas) Cable Gland Size 20 (M20) 1/2" NPT Entry Thread Standard, 3/4" NPT Optional Cable Gland Suits Cable Diameters 12.5mm-20.9mm CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access. Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA) Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.

CMP PX2K-63 Barrier Glands Exd Flameproof (ATEX) Cable Glands

Thorne & Derrick International

CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas) Cable Gland Size 63 (M63) 2.1/2" NPT Entry Thread Standard, 3" NPT Optional Cable Gland Suits Cable Diameters 54.6mm-65.9mm CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access. Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA) Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.

CMP PX2K-75S Barrier Glands Exd Flameproof (ATEX) Cable Glands

Thorne & Derrick International

CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas) Cable Gland Size 75S (M75) 2.1/2" NPT Entry Thread Standard, 3" NPT Optional Cable Gland Suits Cable Diameters 59.0mm-72.1mm CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access. Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA) Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.

CMP Barrier Glands (Explosion Proof Cable Glands)

Thorne & Derrick International

Explosion proof barrier glands provide a flameproof compound seal, outer sheath seal and universal armour clamp for steel wire armoured (SWA) and galvanised steel braided (GSWB) cable termination. A barrier gland is an Ex d cable gland incorporating a compound filled chamber sealing around the individual cores of the cable to maintain the flameproof integrity of the electrical equipment. A barrier gland must be used where the standard method of cable glanding (elastomeric seals) an Ex cable entry is considered unlikely to maintain the integrity of flameproof electrical equipment and contain an explosion within the electrical enclosures due either to cable construction or degree of explosion risk.

CMP PX2K-90 Barrier Glands Exd Flameproof (ATEX) Cable Glands

Thorne & Derrick International

CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas) Cable Gland Size 90 (M90) 3" NPT Entry Thread Standard, 3.1/2" NPT Optional Cable Gland Suits Cable Diameters 76.2mm-90.4mm CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access. Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA) Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.

CMP PX2K-32 Barrier Glands Exd Flameproof (ATEX) Cable Glands

Thorne & Derrick International

CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas) Cable Gland Size 32 (M32) 1" NPT Entry Thread Standard, 1.1/4" NPT Optional Cable Gland Suits Cable Diameters 23.7mm-33.9mm CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access. Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA) Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.

CMP PX2K-25S Barrier Glands Exd Flameproof (ATEX) Cable Glands

Thorne & Derrick International

CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas) Cable Gland Size 25S (M25) 3/4" NPT Entry Thread Standard, 1" NPT Optional Cable Gland Suits Cable Diameters 14.0mm-22.0mm CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access. Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA) Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.

CMP PX2K-50 Barrier Glands Exd Flameproof (ATEX) Cable Glands

Thorne & Derrick International

CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas) Cable Gland Size 50 (M50) 2" NPT Entry Thread Standard, 2.1/2" NPT Optional Cable Gland Suits Cable Diameters 40.4mm-53.1mm CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access. Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA) Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.

CMP PX2K-75 Barrier Glands Exd Flameproof (ATEX) Cable Glands

Thorne & Derrick International

CMP PX2K Cable Glands (Barrier Glands Exd Flameproof with ATEX Certification for Hazardous Areas) Cable Gland Size 75 (M75) 3" NPT Entry Thread Standard, 3.1/2" NPT Optional Cable Gland Suits Cable Diameters 66.7mm-78.5mm CMP PX2K barrier cable glands are ATEX certified and suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22. Flameproof compound filled barrier glands for cable terminations within ATEX areas are supplied with a "universal" reversible armour ring to suit all types of armoured cables - this includes steel wire armoured (SWA), steel tape armoured (STA) and wire braided cables for installation within hazardous areas. Barrier cable glands provide a compound barrier seal around the cable conductors and an environmental seal on the cable outer sheath. The CMP PX2K cable gland provides a mechanical cable retention and electrical continuity via the cable armour termination. A combined detachable armour cone and compound tube, together with AnyWay universal cable clamping ring arrangement allows the cable to be easily disconnected from the electrical equipment and easily re-connected. This cable gland feature facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access. Cable Glands are suitable for following cable types - Wire Braid Armour, Single Steel Wire Armour (SWA), Screened Flexible Wire Braid (eg CY or SY), Steel Tape Armour (STA), Pliable Wire Armour (PWA) Cable Sealing Area - Inner Compound Barrier and Cable Outer Sheath CMP PX2K cable glands with offshore and marine approvals including Lloyds, DNV and ABS are available - LSF cable gland shrouds available for low smoke and fume cable terminations.

Zinc Continuous Analysis from SEIBOLD-Wasser.pdf

ENVIMART

Nickel Continuous Analysis from SEIBOLD-Wasser.pdf

ENVIMART

Similar to ATIs-B12-2-Wire-Gas-Transmitter-Support-Drawings.pdf

STI 7532 Instruction Manual

JMAC Supply

STI 7533AED Instruction Manual

JMAC Supply

Hawke ICG 653/Universal Hazardous Area Cable Gland

Thorne & Derrick International

Catalogue siemens MCB6 SX

Công ty cổ phần OKS | Tổng thầu thi công Nhà máy GMP, Tổng thầu thi công Nhà kho GSP

WT Henley House Service Cutouts - Series 7

Thorne & Derrick International

WT Henley 54137-04 Single Pole & Neutral House Service Cutouts 60/80A

Thorne & Derrick International

CMP PX2K-20S Barrier Glands Exd Flameproof (ATEX) Cable Glands

Thorne & Derrick International

CMP PX2K & PXSS2K Barrier Cable Glands, Flameproof Exd and Increased Safety Exe

Thorne & Derrick International

CMP PX2K-40 Barrier Glands Exd Flameproof (ATEX) Cable Glands

Thorne & Derrick International

CMP PX2K-20S/16 Barrier Glands Exd Flameproof (ATEX) Cable Glands

Thorne & Derrick International

CMP PX2K-50S Barrier Glands Exd Flameproof (ATEX) Cable GlandsThorne & Derrick International

CMP PX2K-20 Barrier Glands Exd Flameproof (ATEX) Cable Glands

Thorne & Derrick International

CMP PX2K-63 Barrier Glands Exd Flameproof (ATEX) Cable Glands

Thorne & Derrick International

CMP PX2K-75S Barrier Glands Exd Flameproof (ATEX) Cable Glands

Thorne & Derrick International

CMP Barrier Glands (Explosion Proof Cable Glands)

Thorne & Derrick International

CMP PX2K-90 Barrier Glands Exd Flameproof (ATEX) Cable Glands

Thorne & Derrick International

CMP PX2K-32 Barrier Glands Exd Flameproof (ATEX) Cable Glands

Thorne & Derrick International

CMP PX2K-25S Barrier Glands Exd Flameproof (ATEX) Cable Glands

Thorne & Derrick International

CMP PX2K-50 Barrier Glands Exd Flameproof (ATEX) Cable Glands

Thorne & Derrick International

CMP PX2K-75 Barrier Glands Exd Flameproof (ATEX) Cable Glands

Thorne & Derrick International

Similar to ATIs-B12-2-Wire-Gas-Transmitter-Support-Drawings.pdf (20)

STI 7532 Instruction Manual

STI 7533AED Instruction Manual

Hawke ICG 653/Universal Hazardous Area Cable Gland

Catalogue siemens MCB6 SX

WT Henley House Service Cutouts - Series 7

WT Henley 54137-04 Single Pole & Neutral House Service Cutouts 60/80A

CMP PX2K-20S Barrier Glands Exd Flameproof (ATEX) Cable Glands

CMP PX2K & PXSS2K Barrier Cable Glands, Flameproof Exd and Increased Safety Exe

CMP PX2K-40 Barrier Glands Exd Flameproof (ATEX) Cable Glands

CMP PX2K-20S/16 Barrier Glands Exd Flameproof (ATEX) Cable Glands

CMP PX2K-50S Barrier Glands Exd Flameproof (ATEX) Cable Glands

CMP PX2K-20 Barrier Glands Exd Flameproof (ATEX) Cable Glands

CMP PX2K-63 Barrier Glands Exd Flameproof (ATEX) Cable Glands

CMP PX2K-75S Barrier Glands Exd Flameproof (ATEX) Cable Glands

CMP Barrier Glands (Explosion Proof Cable Glands)

CMP PX2K-90 Barrier Glands Exd Flameproof (ATEX) Cable Glands

CMP PX2K-32 Barrier Glands Exd Flameproof (ATEX) Cable Glands

CMP PX2K-25S Barrier Glands Exd Flameproof (ATEX) Cable Glands

CMP PX2K-50 Barrier Glands Exd Flameproof (ATEX) Cable Glands

CMP PX2K-75 Barrier Glands Exd Flameproof (ATEX) Cable Glands

Recently uploaded

Micro RNA genes and their likely influence in rice (Oryza sativa L.) dynamic ...

Open Access Research Paper

Micro RNAs (miRNAs) are small non-coding RNAs molecules having approximately 18-25 nucleotides, they are present in both plants and animals genomes. MiRNAs have diverse spatial expression patterns and regulate various developmental metabolisms, stress responses and other physiological processes. The dynamic gene expression playing major roles in phenotypic differences in organisms are believed to be controlled by miRNAs. Mutations in regions of regulatory factors, such as miRNA genes or transcription factors (TF) necessitated by dynamic environmental factors or pathogen infections, have tremendous effects on structure and expression of genes. The resultant novel gene products presents potential explanations for constant evolving desirable traits that have long been bred using conventional means, biotechnology or genetic engineering. Rice grain quality, yield, disease tolerance, climate-resilience and palatability properties are not exceptional to miRN Asmutations effects. There are new insights courtesy of high-throughput sequencing and improved proteomic techniques that organisms’ complexity and adaptations are highly contributed by miRNAs containing regulatory networks. This article aims to expound on how rice miRNAs could be driving evolution of traits and highlight the latest miRNA research progress. Moreover, the review accentuates miRNAs grey areas to be addressed and gives recommendations for further studies.

DRAFT NRW Recreation Strategy - People and Nature thriving together

Robin Grant

ppt on beauty of the nature by Palak.pptx

RaniJaiswal16

Characterization and the Kinetics of drying at the drying oven and with micro...

Open Access Research Paper

The objective of this work is to contribute to valorization de Nephelium lappaceum by the characterization of kinetics of drying of seeds of Nephelium lappaceum. The seeds were dehydrated until a constant mass respectively in a drying oven and a microwawe oven. The temperatures and the powers of drying are respectively: 50, 60 and 70°C and 140, 280 and 420 W. The results show that the curves of drying of seeds of Nephelium lappaceum do not present a phase of constant kinetics. The coefficients of diffusion vary between 2.09.10-8 to 2.98. 10-8m-2/s in the interval of 50°C at 70°C and between 4.83×10-07 at 9.04×10-07 m-8/s for the powers going of 140 W with 420 W the relation between Arrhenius and a value of energy of activation of 16.49 kJ. mol-1 expressed the effect of the temperature on effective diffusivity.

growbilliontrees.com-Trees for Granddaughter (1).pdf

yadavakashagra

Sustainable farming practices in India .pptx

chaitaliambole

Q&A with the Experts: The Food Service Playbook

World Resources Institute (WRI)

Presentación Giulio Quaggiotto-Diálogo improbable .pptx.pdf

Innovation and Technology for Development Centre

Natural farming @ Dr. Siddhartha S. Jena.pptx

sidjena70

AGRICULTURE Hydrophonic FERTILISER PPT.pptx

BanitaDsouza

Artificial Reefs by Kuddle Life Foundation - May 2024

punit537210

Situated in Pondicherry, India, Kuddle Life Foundation is a charitable, non-profit and non-governmental organization (NGO) dedicated to improving the living standards of coastal communities and simultaneously placing a strong emphasis on the protection of marine ecosystems. One of the key areas we work in is Artificial Reefs. This presentation captures our journey so far and our learnings. We hope you get as excited about marine conservation and artificial reefs as we are. Please visit our website: https://kuddlelife.org Our Instagram channel: @kuddlelifefoundation Our Linkedin Page: https://www.linkedin.com/company/kuddlelifefoundation/ and write to us if you have any questions: info@kuddlelife.org

Prevalence, biochemical and hematological study of diabetic patients

Open Access Research Paper

Diabetes is a rapidly and serious health problem in Pakistan. This chronic condition is associated with serious long-term complications, including higher risk of heart disease and stroke. Aggressive treatment of hypertension and hyperlipideamia can result in a substantial reduction in cardiovascular events in patients with diabetes 1. Consequently pharmacist-led diabetes cardiovascular risk (DCVR) clinics have been established in both primary and secondary care sites in NHS Lothian during the past five years. An audit of the pharmaceutical care delivery at the clinics was conducted in order to evaluate practice and to standardize the pharmacists’ documentation of outcomes. Pharmaceutical care issues (PCI) and patient details were collected both prospectively and retrospectively from three DCVR clinics. The PCI`s were categorized according to a triangularised system consisting of multiple categories. These were ‘checks’, ‘changes’ (‘change in drug therapy process’ and ‘change in drug therapy’), ‘drug therapy problems’ and ‘quality assurance descriptors’ (‘timer perspective’ and ‘degree of change’). A verified medication assessment tool (MAT) for patients with chronic cardiovascular disease was applied to the patients from one of the clinics. The tool was used to quantify PCI`s and pharmacist actions that were centered on implementing or enforcing clinical guideline standards. A database was developed to be used as an assessment tool and to standardize the documentation of achievement of outcomes. Feedback on the audit of the pharmaceutical care delivery and the database was received from the DCVR clinic pharmacist at a focus group meeting.

International+e-Commerce+Platform-www.cfye-commerce.shop

laozhuseo02

Bhopal Gas Leak Tragedy - A Night of death

upasana742003

Alert-driven Community-based Forest monitoring: A case of the Peruvian Amazon

CIFOR-ICRAF

Environmental Science Book By Dr. Y.K. Singh

AhmadKhan917612

IPCC Vice Chair Ladislaus Change Central Asia Climate Change Conference 27 Ma...

ipcc-media

Willie Nelson Net Worth: A Journey Through Music, Movies, and Business Ventures

greendigital

Willie Nelson is a name that resonates within the world of music and entertainment. Known for his unique voice, and masterful guitar skills. and an extraordinary career spanning several decades. Nelson has become a legend in the country music scene. But, his influence extends far beyond the realm of music. with ventures in acting, writing, activism, and business. This comprehensive article delves into Willie Nelson net worth. exploring the various facets of his career that have contributed to his large fortune. Follow us on: Pinterest Introduction Willie Nelson net worth is a testament to his enduring influence and success in many fields. Born on April 29, 1933, in Abbott, Texas. Nelson's journey from a humble beginning to becoming one of the most iconic figures in American music is nothing short of inspirational. His net worth, which estimated to be around $25 million as of 2024. reflects a career that is as diverse as it is prolific. Early Life and Musical Beginnings Humble Origins Willie Hugh Nelson was born during the Great Depression. a time of significant economic hardship in the United States. Raised by his grandparents. Nelson found solace and inspiration in music from an early age. His grandmother taught him to play the guitar. setting the stage for what would become an illustrious career. First Steps in Music Nelson's initial foray into the music industry was fraught with challenges. He moved to Nashville, Tennessee, to pursue his dreams, but success did not come . Working as a songwriter, Nelson penned hits for other artists. which helped him gain a foothold in the competitive music scene. His songwriting skills contributed to his early earnings. laying the foundation for his net worth. Rise to Stardom Breakthrough Albums The 1970s marked a turning point in Willie Nelson's career. His albums "Shotgun Willie" (1973), "Red Headed Stranger" (1975). and "Stardust" (1978) received critical acclaim and commercial success. These albums not only solidified his position in the country music genre. but also introduced his music to a broader audience. The success of these albums played a crucial role in boosting Willie Nelson net worth. Iconic Songs Willie Nelson net worth is also attributed to his extensive catalog of hit songs. Tracks like "Blue Eyes Crying in the Rain," "On the Road Again," and "Always on My Mind" have become timeless classics. These songs have not only earned Nelson large royalties but have also ensured his continued relevance in the music industry. Acting and Film Career Hollywood Ventures In addition to his music career, Willie Nelson has also made a mark in Hollywood. His distinctive personality and on-screen presence have landed him roles in several films and television shows. Notable appearances include roles in "The Electric Horseman" (1979), "Honeysuckle Rose" (1980), and "Barbarosa" (1982). These acting gigs have added a significant amount to Willie Nelson net worth. Television Appearances Nelson's char

Navigating the complex landscape of AI governance

Piermenotti Mauro

Summary of the Climate and Energy Policy of Australia

yasmindemoraes1

Recently uploaded (20)

Micro RNA genes and their likely influence in rice (Oryza sativa L.) dynamic ...

DRAFT NRW Recreation Strategy - People and Nature thriving together

ppt on beauty of the nature by Palak.pptx

Characterization and the Kinetics of drying at the drying oven and with micro...

growbilliontrees.com-Trees for Granddaughter (1).pdf

Sustainable farming practices in India .pptx

Q&A with the Experts: The Food Service Playbook

Presentación Giulio Quaggiotto-Diálogo improbable .pptx.pdf

Natural farming @ Dr. Siddhartha S. Jena.pptx

AGRICULTURE Hydrophonic FERTILISER PPT.pptx

Artificial Reefs by Kuddle Life Foundation - May 2024

Prevalence, biochemical and hematological study of diabetic patients

International+e-Commerce+Platform-www.cfye-commerce.shop

Bhopal Gas Leak Tragedy - A Night of death

Alert-driven Community-based Forest monitoring: A case of the Peruvian Amazon

Environmental Science Book By Dr. Y.K. Singh

IPCC Vice Chair Ladislaus Change Central Asia Climate Change Conference 27 Ma...

Willie Nelson Net Worth: A Journey Through Music, Movies, and Business Ventures

Navigating the complex landscape of AI governance

Summary of the Climate and Energy Policy of Australia

ATIs-B12-2-Wire-Gas-Transmitter-Support-Drawings.pdf

1. Series B12 2-Wire Transmitter - Page 1 of 7 B12 SENSOR / TRANSMITTER B12 SENSOR / TRANSMITTER - EXPLOSION-PROOF 2.88" 73mm 3.75" 95mm 4.73" 120mm 6.07" 154mm .75" 19mm 3/4" NPT 3/4" NPT File: SS-B12RH.P65, REV-H, DATE: 5/28/10 1) Enclosure Ratings: CLASS I, GROUPS B,C,D CLASS II, GROUPS E,F,G CLASS III 2) Assembly is normally mounted directly to suitable explosion-proof conduit. 3) To maintain the integrity of the transmitter, explosion-proof conduit and cable entry seals are required by local electrical codes. 4) Remote C10 Sensor is dimensionally the same as the standard version. Cable length is specified by customer. Dual condulet required for installation. Dimensional 1) Enclosure Ratings: Nema-4X / IP 66 2) Enclosure Material: Polystyrene base and cover, Standard Gray 3) Knockouts: Pg 11 (.75" dia.) Pg 16 (.90" dia.)

2. Series B12 2-Wire Transmitter - Page 2 of 7 1.025" 26mm 1.5" 38mm Pg16 THREAD LOCKNUT SEAL RING 2.0" 51mm 1.025" 26mm 2.60" 66mm G10 SENSOR GAS SPECIFIC A10 SENSOR GAS SPECIFIC C10 EXPLOSION-PROOF SENSOR GAS SPECIFIC LENGTH IS CUSTOMER SPECIFIED GAS SENSORS A10 REMOTE SENSOR GAS SPECIFIC SS-B12RH, (5/10) Support Data C10 LEADED EXPLOSION-PROOF SENSOR GAS SPECIFIC

3. Series B12 2-Wire Transmitter - Page 3 of 7 SS-B12RH, (5/10) B12 w/ A10 SENSOR CALIBRATION ADAPTER ATI-0467 B12 w/ A10 SENSOR FLOWCELL ASSEMBLY ATI-0468 General Diagrams

4. Series B12 2-Wire Transmitter - Page 4 of 7 SS-B12RH, (5/10) X-PROOF TRANSMITTER w/ C10 SENSOR CALIBRATIONADAPTER ATI-0466 XPROOF TRANSMITTER w/ C10 SENSOR FLOWCELL ASSEMBLY ATI-0465 General Diagrams

5. Series B12 2-Wire Transmitter - Page 5 of 7 CABLE GLAND INSTALLATION NOTES 1) Mount Transmitter to wall with screws inserted in blind mounting holes, (accessible with cover removed. 2) Cable gland supplied uses Pg 11 knockout. Use extreme care in removing knockout. Score inside of concentric knockout with razor knife. 3) Sun shade is recommended for outdoor applications. REMOVING KNOCKOUTS CONDUIT MOUNT INSTALLATION 1) To remove knockouts, place a thin bladed screwdriver into the circular slot or the desired knockout size and tap firmly with a hammer. 2) Remove Transmitter PCB prior to removing knockouts, to prevent damage to the PCB. 1) Transmitter may be supported by conduit or screwed to wall through blind mounting holes. 2) Sun shade is recommended for outdoor applications. CABLE GLAND SUPPLIED BY ATI FROM RECEIVER ½" CONDUIT ADAPTOR SUPPLIED CONDUIT ENTRY MUST BE SEALED WATER-TIGHT ½" CONDUIT SS-B12RH, (5/10) Installations

6. Series B12 2-Wire Transmitter - Page 6 of 7 Support Data ATI-0348 B12/G10 Insertion Sensor (Customer Wiring) SS-B12RH, (5/10)

7. Series B12 2-Wire Transmitter - Page 7 of 7 G10 INSERTION PROBE (SENSING POSITION) ATI-0298 G10 INSERTION PROBE (CALIBRATION POSITION) 1) To place sensor into the Calibration position, slowly back the sensor out of the housing, until you here a click and the sensor doesn't move any more. The sensor is now positioned to be calibrated. Attach tubing to barb fitting, and proceed with calibration. When calibration is complete, the sensor is now ready to be placed back into the sensing position. To do this pull up on the locking pin, and slide the sensor in a little bit release the pin,then continue to slide the sensor all the way into the pipe. The sensor is now in operation again. ATI-0299 Support Data SS-B12RH, (5/10)

ATIs-B12-2-Wire-Gas-Transmitter-Support-Drawings.pdf

Recommended

Recommended

More Related Content

Similar to ATIs-B12-2-Wire-Gas-Transmitter-Support-Drawings.pdf

Similar to ATIs-B12-2-Wire-Gas-Transmitter-Support-Drawings.pdf (20)

More from ENVIMART

More from ENVIMART (20)

Recently uploaded

Recently uploaded (20)

ATIs-B12-2-Wire-Gas-Transmitter-Support-Drawings.pdf