Astro vee
•
2 likes•650 views
The AstroVee is a high efficiency particulate air (HEPA) filter designed for constant and variable air volume systems. It uses a V-shaped configuration of mini pleat media packs in a rigid galvanized steel housing to increase media area and filter capacity. This allows for low pressure drop and energy costs. The AstroVee is suitable for applications requiring strict airborne contaminant control, and its rigid construction performs well under turbulent conditions.
Report
Share
Report
Share
Download to read offline
Recommended
Standard boiler 500 mwerection manual (boiler auxiliaries)
This manual will help you to technical details required during erection of 500 mw boiler. very neatly crafted manual by BHEL.hats off t them.
Flare stack design drawing (25 ft) with structural support
This document provides specifications for a pipe structure including a 3 inch schedule 40 pipe, 150 class flanges, and a total height of 25 feet that must withstand wind speeds of 50 meters per second.
Cooling water (CW) system
Cooling water is used to remove heat from machines and can be recycled or used once. Recirculating systems use cooling towers or ponds to remove heat. Industrial cooling towers use water sources like rivers as makeup water to replace evaporated water. They continuously circulate water through heat exchangers where heat is absorbed and rejected to the atmosphere through partial water evaporation. Different types of cooling towers exist like natural draft, induced draft, and forced draft towers which vary based on design and how air is moved through the tower. Key components, performance parameters, and maintenance factors of cooling towers are discussed.
Power plant performance_efficiency
Power Plant Performance/Efficiency Monitoring Tool -
Especially for them who really want to work with Efficiency monitoring, This Spread sheet include Boiler Efficiency (ASME PTC 4.0, 2008), Turbine Efficiency (ASME PTC 6.0, 1998), APH Performance (ASME PTC 4.3), Auxiliary Power Consumption (APC) moreover it generate plant MIS As well as complete report.
If you want to download in Spreadsheet/excel format.
http://www.scribd.com/doc/157799307/Power-Plant-Performance-Efficiency-Monitoring-Tool
ज्ञान प्राप्त करने के तीन तरीके है. पहला चिंतन जो सबसे सही तरीका है. दूसरा अनुकरण जो सबसे आसान तरीका है और तीसरा अनुभव जो सबसे कष्टकारी है ~ कन्फ्यूसियस
Cb gf web in aug 2016, controls r2 8.23.16 final
Como controlar el nivel de agua de la calderas y los metodos de control mas conveniente. Esta presentacion con los expertos de Cleaver brooks y Grundfos te dan los mejores alternativas para controlar el nivel de agua de las calderas.
210 mw turbine cycle heat rate
The Presentation describes and calculates the LMW 210 MW Steam Turbine with actual parameters of steam, condensate and feed water
TPS EFFICIENCY AND HEAT RATE
DESCRIBES THE THERMAL POWER STATION HEAT RATE AND EFFICIENCY
CASE STUDY OF A 210 MW PLANT, COAL BASED, WITH HP,IP AND LP TURBINES WITH CONDENSER.
Improve plant heat rate with feedwater heater control
This document discusses improving thermal efficiency in power plants by optimizing feedwater heater performance and control. It contains the following key points:
1. Small deviations in heat rate can have large impacts on annual fuel costs, so precise control of feedwater heater levels is important for efficiency. Poor level control leads to heat losses.
2. Feedwater heaters use extraction steam to preheat feedwater and improve boiler efficiency. Accurate level control ensures optimal heat transfer. Instrument errors can degrade performance.
3. Two case studies show how unreliable level controls increased annual fuel costs by $243,000 in one plant and led to excessive heater bypasses in another. Updating controls provided paybacks of 1
Recommended
Standard boiler 500 mwerection manual (boiler auxiliaries)
This manual will help you to technical details required during erection of 500 mw boiler. very neatly crafted manual by BHEL.hats off t them.
Flare stack design drawing (25 ft) with structural support
This document provides specifications for a pipe structure including a 3 inch schedule 40 pipe, 150 class flanges, and a total height of 25 feet that must withstand wind speeds of 50 meters per second.
Cooling water (CW) system
Cooling water is used to remove heat from machines and can be recycled or used once. Recirculating systems use cooling towers or ponds to remove heat. Industrial cooling towers use water sources like rivers as makeup water to replace evaporated water. They continuously circulate water through heat exchangers where heat is absorbed and rejected to the atmosphere through partial water evaporation. Different types of cooling towers exist like natural draft, induced draft, and forced draft towers which vary based on design and how air is moved through the tower. Key components, performance parameters, and maintenance factors of cooling towers are discussed.
Power plant performance_efficiency
Power Plant Performance/Efficiency Monitoring Tool -
Especially for them who really want to work with Efficiency monitoring, This Spread sheet include Boiler Efficiency (ASME PTC 4.0, 2008), Turbine Efficiency (ASME PTC 6.0, 1998), APH Performance (ASME PTC 4.3), Auxiliary Power Consumption (APC) moreover it generate plant MIS As well as complete report.
If you want to download in Spreadsheet/excel format.
http://www.scribd.com/doc/157799307/Power-Plant-Performance-Efficiency-Monitoring-Tool
ज्ञान प्राप्त करने के तीन तरीके है. पहला चिंतन जो सबसे सही तरीका है. दूसरा अनुकरण जो सबसे आसान तरीका है और तीसरा अनुभव जो सबसे कष्टकारी है ~ कन्फ्यूसियस
Cb gf web in aug 2016, controls r2 8.23.16 final
Como controlar el nivel de agua de la calderas y los metodos de control mas conveniente. Esta presentacion con los expertos de Cleaver brooks y Grundfos te dan los mejores alternativas para controlar el nivel de agua de las calderas.
210 mw turbine cycle heat rate
The Presentation describes and calculates the LMW 210 MW Steam Turbine with actual parameters of steam, condensate and feed water
TPS EFFICIENCY AND HEAT RATE
DESCRIBES THE THERMAL POWER STATION HEAT RATE AND EFFICIENCY
CASE STUDY OF A 210 MW PLANT, COAL BASED, WITH HP,IP AND LP TURBINES WITH CONDENSER.
Improve plant heat rate with feedwater heater control
This document discusses improving thermal efficiency in power plants by optimizing feedwater heater performance and control. It contains the following key points:
1. Small deviations in heat rate can have large impacts on annual fuel costs, so precise control of feedwater heater levels is important for efficiency. Poor level control leads to heat losses.
2. Feedwater heaters use extraction steam to preheat feedwater and improve boiler efficiency. Accurate level control ensures optimal heat transfer. Instrument errors can degrade performance.
3. Two case studies show how unreliable level controls increased annual fuel costs by $243,000 in one plant and led to excessive heater bypasses in another. Updating controls provided paybacks of 1
Process Design for Natural Gas Transmission
This document provides an overview of the process design methodology for natural gas transmission from a gas plant to a city power station via a pipeline and booster compressor station. Key details include:
- Natural gas composition and properties, pipeline lengths and specifications
- Three part design methodology for the upstream pipeline, booster compressor, and downstream pipeline
- Property estimation methods including Kay's rule, Sutton correlations, and Dranchuk-Abou-Kassem equation of state
- Accounting for non-hydrocarbon gases like CO2 and H2S using Wichert & Aziz correlations
The design process involves estimating pipeline parameters, mixture properties, pressure drops, temperatures and flows to safely transmit the natural gas while
STUDY OF VARIOUS SYSTEMS IN 500MW THERMAL POWER PLANT
The document provides details about a main project report submitted by four students for their Bachelor of Technology degree. It discusses studying various systems in a 500MW thermal power plant. The report includes chapters on the coal handling plant, ash handling plant, electrostatic precipitator, boiler, steam turbine, generator, condenser and cooling towers, water treatment plant, transformers, switchyard, and the start up procedure for Dr. NTTPS Stage-4 plant. The objective of the project is to study the operation, maintenance and protection of power transformers used in Stage-IV of Dr. NTTPS thermal power plant.
Energy adudit methodology for boiler
This document describes the methodology for conducting an energy audit of a turbine cycle. It discusses collecting data on steam and water cycle parameters, measuring turbine efficiency, identifying factors that affect heat rate, and evaluating the performance of feedwater heaters. The key steps involve collecting design specifications and operational data, measuring temperatures, pressures, flows, and outputs, calculating turbine efficiency using enthalpy methods, identifying reasons for deviations from design performance, and analyzing factors like steam conditions, condenser performance, heat exchanger fouling that affect the heat rate.
Jak zwiększyc efektywność pompy ciepła
Efektywność pompy ciepła jest zależna od szeregu czynników związanych z budową, zastosowanymi komponentami, a także projektem całego systemu. Pompy ciepła flexoTHERM i flexoCOMPACT produkowane przez firmę Vaillant cechują się zastosowaniem glikolu w obiegu pomiędzy jednostką zewnętrzną, a wewnętrzną. W porównaniu do standardowych pomp ciepła typu Split, gdzie w układzie krąży czynnik ziębniczy, takie rozwiązanie cechuje się nie tylko wygodą montażu (brak ingerencji w układ chłodniczy pompy ciepła), ale także zwiększoną efektywnością dzięki m.in. wyeliminowaniu strat ciepła z obiegu czynnika i strat energii na wydłużone cykle rozmrażania wymiennika powietrza i podgrzewania oleju przy rozruchu sprężarki.
NTPC Ramagundam Station Blackout and Action Plan
The document provides information about station blackout procedures and restoration of power supply at NTPC Ramagundam power station. It defines types of power outages like transient faults and brownouts. It describes the status of units during a blackout and emergency equipment that can be started. The action plan details starting DC equipment, preventing steam entry into condensers, starting emergency AC equipment and restoring station power supply. It also provides summaries of the Southern Region power grid and procedures for starting up the individual subsystems in Andhra Pradesh.
Planilha geral 2015-06-29_16_50_30
Este documento detalha os serviços necessários para a construção do Teatro Ópera de Campinas, incluindo serviços preliminares, movimento de terra, fundações, superestrutura e estrutura metálica. Os principais itens são escavações, fundações com estacas hélice, blocos e vigas de concreto, formas, armaduras, concretagem e estrutura metálica. O valor total estimado é de aproximadamente R$27 milhões.
Themal power plant NTPC
The document provides details about a power plant familiarization training carried out at NTPC Ltd Ramagundam Super Thermal Power Station from January 16-31, 2015. It includes an introduction to NTPC, an overview of the energy conversion process at the power plant from coal to steam to electricity, and descriptions of various power plant equipment involved such as coal handling equipment, fans, air preheaters, the boiler and its auxiliaries, the turbine, condenser, heaters, deaerator, boiler feed pump, generator and cooling tower.
Spirax sarco the-steam-and-condensate-loop-block-1-14
Steam is a widely used and efficient energy carrier that can be generated and distributed cost effectively via pipe networks. It can transfer large amounts of heat energy for applications like mechanical power, heating buildings and industrial processes. Modern steam systems are automated and easy to control precisely via pressure and temperature regulation. Steam plants are durable, flexible for multiple uses, and when well maintained can operate efficiently for many years.
Steam Thermocompressor Technical Information
Steam thermocompressors utilize a flow of high pressure steam to boost the pressure of a stream of low pressure steam. The purpose can be to either recycle the low pressure steam with the added heat, or to create a usable steam supply from a low pressure steam source.
coal feeder and ccs control auto loop.pptx
The document describes the fuel master and coordinated control system (CCS) used to automatically control the amount of coal fed to a boiler. The fuel master control loop uses a controller to vary the output to multiple coal feeders based on the boiler's operating mode and demand. The CCS provides coordinated control of the boiler and turbine to maintain balance of the unit load, steam pressure, and fuel/air demand. It can operate the boiler in follow, coordinated, or base modes depending on the status of the boiler and turbine masters.
Dobór kotła do powierzchni domu
Dobór mocy grzewczej kotła do budynku powinien być poprzedzony szczegółowymi obliczeniami projektowymi w ramach których określa się zapotrzebowanie ciepła dla ogrzewania, a także uwzględnia wymagania dla podgrzewania ciepłej wody użytkowej. W przypadku nowych budynków taki projekt często jest wykonywany w ramach jego dokumentacji projektowej, jednak dla istniejących budynków może być to problematyczne. Dlatego też stosuje się w praktyce różnego rodzaju metody wskaźnikowe pozwalające na szybki dobór mocy kotła np. w stosunku do powierzchni lub kubatury domu.
210 mw turbine cycle heat rate
210 MW Turbine Cycle Heat Rate includes all parameters of Steam and Condensate at various inlets and outlets of HP, IP and LP Turbines, Condenser and also takes into consideration the regenerative HP, IP/LP Heaters in the Turbine Cycle. Well Illustrated with all diagrams.
Technic Magazine issue 326 ( วารสารเทคนิค ฉบับ 326 )
Technic Magazine issue 326 ( วารสารเทคนิค ฉบับ 326 )M&E Co., Ltd. - Engineering Magazine in Thailand
The most popular Thai magazine in the field of Mechanical, Electrical and Industrial Engineering. Technic Magazine is printed in Thailand and distributed throughout Thailand since 1984.
MORE INFORMATION: www.me.co.thPlanos de transporte 18º Congresso ANTP
O documento apresenta uma lista de 26 planos de transporte e urbanísticos desenvolvidos para a cidade de São Paulo entre 1926 e 2010. Os planos são divididos em categorias como planos de transporte, planos urbanísticos e grupos gestores. O objetivo é estudar os antecedentes históricos dos planos para entender as razões para a não aplicação dos mesmos e a percepção de falta de planejamento na cidade.
Unit lightup synchronisation & shutdown
This document provides information about the start-up process for a 660 MW power generating unit at Adani Power Limited in Tiroda, India. It discusses the key steps in preparing boiler and turbine systems, warming up and rolling the turbine, synchronizing with the grid, and gradually loading the unit to full power. The start-up involves flushing the boiler, lighting the furnace, warming casings, rolling the turbine to operating speed, switching over steam flows, and cutting in coal mills in stages to ramp up load. Critical parameters are monitored at each stage to ensure safe and efficient start-up of the unit.
The Coal mill performance monitoring
The presentation covers the capacity of the coal mill wrt the grindebility index, the PA flow, coal flow, fuel air ratio etc.
MARANGON-M.-Dez-2018-Capítulo-05-Resistência-ao-Cisalhamento-dos-Solos.pdf
O documento discute a resistência ao cisalhamento dos solos. Explica que a resistência depende da coesão e do ângulo de atrito interno do solo, que podem ser determinados por ensaios de laboratório e campo. Descreve brevemente os principais ensaios de campo, incluindo o ensaio de penetração estática do cone, o ensaio de palheta e o ensaio pressiométrico.
Thermal power plant efficiency
The Presentation describes the basics about the Efficiency and performance of a steam based power plant. It also describes how the heat rate of the power plant is important from the point of view of fuel savings.
Harsh ntpc
NTPC Dadri power plant has an installed capacity of 2642 MW including 1820 MW from thermal units and 817 MW from gas units. It sources coal from Piparwara mine in Jharkhand and water from Upper Ganga Canal. The basic processes include coal handling, combustion in boilers to produce steam, steam passing through turbines to generate electricity, and condensation of steam in condensers. Key components are coal handling plant, boilers, turbines, condensers, cooling towers, ESPs for emissions control, and chimney. Fly ash is a byproduct that is used in construction materials.
Lọc khí AAF Varice xvl
VariCel VXL are compact filters designed for industrial and commercial HVAC systems. They offer high capacities of 3000-5000 m3/h, are lightweight and easy to install. VariCel VXL filters are available in efficiency classes F6-F9 and can withstand difficult operating conditions like changes in air volume, high humidity, and intermittent water exposure. They also have long service lives and low resistance.
Lọc khí Vari cel I
This document summarizes VariCel air filters, which are extended surface supported pleat filters available in different efficiencies. VariCel filters can withstand difficult operating conditions and are designed to improve indoor air quality. They have a rigid construction with a bonded pleated media pack to maintain structure under various conditions. VariCel filters also have a dual density media design that allows for maximum dust collection.
More Related Content
What's hot
Process Design for Natural Gas Transmission
This document provides an overview of the process design methodology for natural gas transmission from a gas plant to a city power station via a pipeline and booster compressor station. Key details include:
- Natural gas composition and properties, pipeline lengths and specifications
- Three part design methodology for the upstream pipeline, booster compressor, and downstream pipeline
- Property estimation methods including Kay's rule, Sutton correlations, and Dranchuk-Abou-Kassem equation of state
- Accounting for non-hydrocarbon gases like CO2 and H2S using Wichert & Aziz correlations
The design process involves estimating pipeline parameters, mixture properties, pressure drops, temperatures and flows to safely transmit the natural gas while
STUDY OF VARIOUS SYSTEMS IN 500MW THERMAL POWER PLANT
The document provides details about a main project report submitted by four students for their Bachelor of Technology degree. It discusses studying various systems in a 500MW thermal power plant. The report includes chapters on the coal handling plant, ash handling plant, electrostatic precipitator, boiler, steam turbine, generator, condenser and cooling towers, water treatment plant, transformers, switchyard, and the start up procedure for Dr. NTTPS Stage-4 plant. The objective of the project is to study the operation, maintenance and protection of power transformers used in Stage-IV of Dr. NTTPS thermal power plant.
Energy adudit methodology for boiler
This document describes the methodology for conducting an energy audit of a turbine cycle. It discusses collecting data on steam and water cycle parameters, measuring turbine efficiency, identifying factors that affect heat rate, and evaluating the performance of feedwater heaters. The key steps involve collecting design specifications and operational data, measuring temperatures, pressures, flows, and outputs, calculating turbine efficiency using enthalpy methods, identifying reasons for deviations from design performance, and analyzing factors like steam conditions, condenser performance, heat exchanger fouling that affect the heat rate.
Jak zwiększyc efektywność pompy ciepła
Efektywność pompy ciepła jest zależna od szeregu czynników związanych z budową, zastosowanymi komponentami, a także projektem całego systemu. Pompy ciepła flexoTHERM i flexoCOMPACT produkowane przez firmę Vaillant cechują się zastosowaniem glikolu w obiegu pomiędzy jednostką zewnętrzną, a wewnętrzną. W porównaniu do standardowych pomp ciepła typu Split, gdzie w układzie krąży czynnik ziębniczy, takie rozwiązanie cechuje się nie tylko wygodą montażu (brak ingerencji w układ chłodniczy pompy ciepła), ale także zwiększoną efektywnością dzięki m.in. wyeliminowaniu strat ciepła z obiegu czynnika i strat energii na wydłużone cykle rozmrażania wymiennika powietrza i podgrzewania oleju przy rozruchu sprężarki.
NTPC Ramagundam Station Blackout and Action Plan
The document provides information about station blackout procedures and restoration of power supply at NTPC Ramagundam power station. It defines types of power outages like transient faults and brownouts. It describes the status of units during a blackout and emergency equipment that can be started. The action plan details starting DC equipment, preventing steam entry into condensers, starting emergency AC equipment and restoring station power supply. It also provides summaries of the Southern Region power grid and procedures for starting up the individual subsystems in Andhra Pradesh.
Planilha geral 2015-06-29_16_50_30
Este documento detalha os serviços necessários para a construção do Teatro Ópera de Campinas, incluindo serviços preliminares, movimento de terra, fundações, superestrutura e estrutura metálica. Os principais itens são escavações, fundações com estacas hélice, blocos e vigas de concreto, formas, armaduras, concretagem e estrutura metálica. O valor total estimado é de aproximadamente R$27 milhões.
Themal power plant NTPC
The document provides details about a power plant familiarization training carried out at NTPC Ltd Ramagundam Super Thermal Power Station from January 16-31, 2015. It includes an introduction to NTPC, an overview of the energy conversion process at the power plant from coal to steam to electricity, and descriptions of various power plant equipment involved such as coal handling equipment, fans, air preheaters, the boiler and its auxiliaries, the turbine, condenser, heaters, deaerator, boiler feed pump, generator and cooling tower.
Spirax sarco the-steam-and-condensate-loop-block-1-14
Steam is a widely used and efficient energy carrier that can be generated and distributed cost effectively via pipe networks. It can transfer large amounts of heat energy for applications like mechanical power, heating buildings and industrial processes. Modern steam systems are automated and easy to control precisely via pressure and temperature regulation. Steam plants are durable, flexible for multiple uses, and when well maintained can operate efficiently for many years.
Steam Thermocompressor Technical Information
Steam thermocompressors utilize a flow of high pressure steam to boost the pressure of a stream of low pressure steam. The purpose can be to either recycle the low pressure steam with the added heat, or to create a usable steam supply from a low pressure steam source.
coal feeder and ccs control auto loop.pptx
The document describes the fuel master and coordinated control system (CCS) used to automatically control the amount of coal fed to a boiler. The fuel master control loop uses a controller to vary the output to multiple coal feeders based on the boiler's operating mode and demand. The CCS provides coordinated control of the boiler and turbine to maintain balance of the unit load, steam pressure, and fuel/air demand. It can operate the boiler in follow, coordinated, or base modes depending on the status of the boiler and turbine masters.
Dobór kotła do powierzchni domu
Dobór mocy grzewczej kotła do budynku powinien być poprzedzony szczegółowymi obliczeniami projektowymi w ramach których określa się zapotrzebowanie ciepła dla ogrzewania, a także uwzględnia wymagania dla podgrzewania ciepłej wody użytkowej. W przypadku nowych budynków taki projekt często jest wykonywany w ramach jego dokumentacji projektowej, jednak dla istniejących budynków może być to problematyczne. Dlatego też stosuje się w praktyce różnego rodzaju metody wskaźnikowe pozwalające na szybki dobór mocy kotła np. w stosunku do powierzchni lub kubatury domu.
210 mw turbine cycle heat rate
210 MW Turbine Cycle Heat Rate includes all parameters of Steam and Condensate at various inlets and outlets of HP, IP and LP Turbines, Condenser and also takes into consideration the regenerative HP, IP/LP Heaters in the Turbine Cycle. Well Illustrated with all diagrams.
Technic Magazine issue 326 ( วารสารเทคนิค ฉบับ 326 )
Technic Magazine issue 326 ( วารสารเทคนิค ฉบับ 326 )M&E Co., Ltd. - Engineering Magazine in Thailand
The most popular Thai magazine in the field of Mechanical, Electrical and Industrial Engineering. Technic Magazine is printed in Thailand and distributed throughout Thailand since 1984.
MORE INFORMATION: www.me.co.thPlanos de transporte 18º Congresso ANTP
O documento apresenta uma lista de 26 planos de transporte e urbanísticos desenvolvidos para a cidade de São Paulo entre 1926 e 2010. Os planos são divididos em categorias como planos de transporte, planos urbanísticos e grupos gestores. O objetivo é estudar os antecedentes históricos dos planos para entender as razões para a não aplicação dos mesmos e a percepção de falta de planejamento na cidade.
Unit lightup synchronisation & shutdown
This document provides information about the start-up process for a 660 MW power generating unit at Adani Power Limited in Tiroda, India. It discusses the key steps in preparing boiler and turbine systems, warming up and rolling the turbine, synchronizing with the grid, and gradually loading the unit to full power. The start-up involves flushing the boiler, lighting the furnace, warming casings, rolling the turbine to operating speed, switching over steam flows, and cutting in coal mills in stages to ramp up load. Critical parameters are monitored at each stage to ensure safe and efficient start-up of the unit.
The Coal mill performance monitoring
The presentation covers the capacity of the coal mill wrt the grindebility index, the PA flow, coal flow, fuel air ratio etc.
MARANGON-M.-Dez-2018-Capítulo-05-Resistência-ao-Cisalhamento-dos-Solos.pdf
O documento discute a resistência ao cisalhamento dos solos. Explica que a resistência depende da coesão e do ângulo de atrito interno do solo, que podem ser determinados por ensaios de laboratório e campo. Descreve brevemente os principais ensaios de campo, incluindo o ensaio de penetração estática do cone, o ensaio de palheta e o ensaio pressiométrico.
Thermal power plant efficiency
The Presentation describes the basics about the Efficiency and performance of a steam based power plant. It also describes how the heat rate of the power plant is important from the point of view of fuel savings.
Harsh ntpc
NTPC Dadri power plant has an installed capacity of 2642 MW including 1820 MW from thermal units and 817 MW from gas units. It sources coal from Piparwara mine in Jharkhand and water from Upper Ganga Canal. The basic processes include coal handling, combustion in boilers to produce steam, steam passing through turbines to generate electricity, and condensation of steam in condensers. Key components are coal handling plant, boilers, turbines, condensers, cooling towers, ESPs for emissions control, and chimney. Fly ash is a byproduct that is used in construction materials.
What's hot (20)
STUDY OF VARIOUS SYSTEMS IN 500MW THERMAL POWER PLANT
STUDY OF VARIOUS SYSTEMS IN 500MW THERMAL POWER PLANT
Spirax sarco the-steam-and-condensate-loop-block-1-14
Spirax sarco the-steam-and-condensate-loop-block-1-14
Technic Magazine issue 326 ( วารสารเทคนิค ฉบับ 326 )
Technic Magazine issue 326 ( วารสารเทคนิค ฉบับ 326 )
MARANGON-M.-Dez-2018-Capítulo-05-Resistência-ao-Cisalhamento-dos-Solos.pdf
MARANGON-M.-Dez-2018-Capítulo-05-Resistência-ao-Cisalhamento-dos-Solos.pdf
Similar to Astro vee
Lọc khí AAF Varice xvl
VariCel VXL are compact filters designed for industrial and commercial HVAC systems. They offer high capacities of 3000-5000 m3/h, are lightweight and easy to install. VariCel VXL filters are available in efficiency classes F6-F9 and can withstand difficult operating conditions like changes in air volume, high humidity, and intermittent water exposure. They also have long service lives and low resistance.
Lọc khí Vari cel I
This document summarizes VariCel air filters, which are extended surface supported pleat filters available in different efficiencies. VariCel filters can withstand difficult operating conditions and are designed to improve indoor air quality. They have a rigid construction with a bonded pleated media pack to maintain structure under various conditions. VariCel filters also have a dual density media design that allows for maximum dust collection.
aeration-products-for-energy-efficient-biological-treatment.pdf
The document discusses aeration products and systems for wastewater treatment plants. It describes various aeration equipment options from the company, including fine bubble diffusers, coarse bubble diffusers, and mechanical aerators. It emphasizes that the company's engineers can optimize aeration processes through system design, equipment selection, installation, and use of monitoring and control systems to improve oxygen transfer efficiency and reduce energy costs.
Horizontal laminar air flow
We are manufacturers of horizontal laminar air flow in India since 1990. Our laminar air flows are widely used for day to day
clean rooms activities, pathogen handling, microbiology and biotechnology applications in various laboratories.
Air Filters Catalog - Concept Engineers
Concept Engineers is an Indian manufacturer and exporter of industrial ventilation equipment established in 2000. It produces a wide range of products including fans, air handling units, air pollution control equipment, and industrial air filters. The company aims to provide high quality, reliable products and services at competitive prices. It serves clients in industries such as HVAC, petrochemicals, pharmaceuticals, food processing, and more. Concept Engineers has become a leading supplier of these products in India and has an expanding global export business.
Product Quick Reference Guide
AAF has issued a new Product Quick Reference Guide. This brochure provides an overview on the AAF air filter portfolio at a glance. Per air filter, an introduction to the main configuration, performance and overall application is given. The new brochure covers more products and includes a short selection matrix and air filtration glossary.
Am wash
AmWash is a lightweight, washable panel filter for HVAC systems. It has a reusable aluminum steel frame, synthetic fiber media, and low airflow resistance. The media is available in thicknesses of 10mm or 20mm, providing high dust holding capacity. AmWash filters are classified as G3, F4, or F5 and can be used as prefilters or main filters to improve indoor air quality. The filters are easy to install due to their lightweight and compact size. They have a sturdy galvanized steel frame and can withstand harsh operating conditions. The media can also be blow cleaned or washed with a detergent solution for limited cleaning.
Am wash
AmWash is a lightweight, washable panel filter for HVAC systems. It has a reusable aluminum steel frame, synthetic fiber media, and low airflow resistance. The media is available in thicknesses of 10mm or 20mm, providing high dust holding capacity. AmWash filters are classified as G3, F4, or F5 and can be used as prefilters or main filters to improve indoor air quality. The filters are easy to install due to their lightweight and compact size. While they can be blow cleaned, they are also washable using water and detergent.
Weiss technik-mc-op-decken-en
The document summarizes clean air systems for operating theatres provided by Weiss Technik. The systems include operating theatre (OT) recirculating air canopies (ULA systems) and OT filter surface canopies (FFA systems). ULA systems integrate the complete clean air system into an overhead canopy using recirculating air modules. FFA systems supply 100% fresh air from air conditioning units located in adjacent rooms. Both systems create a protective zone for surgical staff and patients using high-efficiency particle filters and unidirectional airflow. Weiss Technik offers customized solutions and claims to be a single-source provider for coordinated clean air, HVAC, and service needs in operating theatres.
Isoclean Healthcare Platform Isolator (HPI G3)
The Isoclean® Healthcare Platform Isolator (HPI-G3) facilitates the isolation of a product or process while providing the required sterile/aseptic environment. It is configured to operate at positive or negative pressure in single or recirculating airflow. This equipment provides a comprehensive range of personnel and product protection in addition to the surrounding work areas and the environment.
• Pharmacy Compounding (Chemotherapy/TPN)
• Small-scale Potent Material Handling
• Aseptic Processing
• Research and Development
• Cell processing
Catalog DOMEL - Brushless Motors and Blowers
The document discusses brushless blowers/pumps manufactured by Domel. It provides details on their construction, applications in industries like manufacturing and medicine, and specifications for different models. Domel offers brushless blowers in various sizes from 135mm to 244mm in diameter with power ratings up to 1800W. They are characterized by compact design, high efficiency, precise control, and can be used for applications like fume extraction, printing machines, medical devices, and more.
Vertical laminar air flow
Weiber Vertical Laminar Air Flow Manufacturers, Laminar Airflow Manufacturers India, Air Flow Bench Suppliers, Vertical Laminar Air Flow Bench, Vertical Air Flow Suppliers, Vertical Laminar Airflow India, Laminar Airflow Suppliers India, Vertical Laminar Air Flow, Airflow Laminar Manufacturers For More Information Please Logon http://cutt.us/sBSY
Supplier of Composites Vacuum Bagging Equipment - Airtech Advanced Materials ...
Supplier of Composites Vacuum Bagging Equipment - Airtech Advanced Materials ...Airtech Advanced Materials Group
The largest exporters of vacuum bagging and composite tooling materials for prepreg/autoclave, resin infusion, and wet lay-up processes is Airtech Advanced Materials Group. With nearly 50 years of extrusion experience, Airtech is your local source for vacuum bagging materials, composite tooling producers, and 3D Print knowledge. For more details: https://airtech.com/Esco Pharma Laminar Flow Straddle Units, Single and Double
The document describes Esco Enterprise Laminar Flow Straddle Units, which are vertical laminar flow clean benches designed for industrial process protection. The key points are:
1) The units come in single and double models up to 1.8 meters wide to suit various industrial applications like electronics, pharmaceuticals, and food production.
2) They provide ISO Class 4 air quality within the work area through ULPA filters with over 99.999% efficiency on particles down to 0.1 microns.
3) The units feature durable stainless steel work surfaces, energy efficient fans, antimicrobial coatings, and meet various international safety standards for cleanroom equipment.
Industrial filters
Enviro Tech Industrial Products offers a wide range of industrial filters for applications such as air and water pollution analysis, liquid clarification, and cell harvesting. Their filter product line includes fine filters, pre-filters, HVAC filters, HEPA filters, bag filters, carbon filters, fuel filters, and oil filters. The filters are manufactured using materials like non-woven synthetic media, activated charcoal, and expanded metal mesh in various micron ratings and sizes.
Bio astrovee 365-in-0804
BioVee and AstroVee are lightweight filters designed for HVAC systems that provide high filtration efficiency while maintaining low pressure drops. They are available in classifications H10 to H13, have rigid designs with pleated media packs and thermoplastic separators to ensure good air quality. The polystyrene construction is fully incinerable and free of halogens. They can operate at temperatures up to 80°C and withstand temporary moisture exposure without significant pressure increases.
ACI company overview 2011
ACI Company Overview provides information about ACI including that it is a designer and manufacturer of industrial air movement products established in 1969. It has a global presence through distributors worldwide and offers standard and custom engineered solutions across industries. ACI supplies industrial fans, airknife systems, drying solutions and accessories to industries such as food, beverage, automotive, and others.
Temperature & Humidity Control Chamber
Utopia produces temperature and humidity control chambers and test chambers that maintain appropriate conditions for critical environments like clean rooms. These chambers can accurately control temperature within a desired range and satisfy criteria for a variety of testing purposes in industries like automotive, construction, aerospace, and electronics. Utopia also provides walk-in chambers large enough to fit pallets for preconditioning and testing under different temperature and humidity conditions while monitoring tests. Additionally, Utopia supplies octagonal-shaped unidirectional filtering ceilings that reduce operating costs compared to square designs by around 20% through decreased surface area and air flow requirements.
Rpt (af 2-741-in-1-0698)
The RPT Safe Change Housing is designed for safely removing radioactive, pathogenic, and toxic contaminants from the air. It features a compact, modular design and fully enclosed bag system for changing filters. The housing can be used with single or double stage filtration and is applicable in industries like healthcare, pharmaceuticals, microelectronics, and nuclear. Filters are securely clamped in place and can be safely removed and contained within the bag during replacement to minimize risk of hazardous particles escaping. The housing is compact and modular to accommodate high air volumes, and is made of reinforced steel constructed to withstand pressures and temperatures.
COMPANY PROFILE
The document provides information on a company that manufactures and supplies various filtration products including air filters, water filters, filter bags, ducting, and diffusers. It lists the company's contact information and facilities. It then describes the types of air and water filtration products offered, including details on their applications and materials. Finally, it provides specifications for several of its air filter product lines.
Similar to Astro vee (20)
aeration-products-for-energy-efficient-biological-treatment.pdf
aeration-products-for-energy-efficient-biological-treatment.pdf
Supplier of Composites Vacuum Bagging Equipment - Airtech Advanced Materials ...
Supplier of Composites Vacuum Bagging Equipment - Airtech Advanced Materials ...
Esco Pharma Laminar Flow Straddle Units, Single and Double
Esco Pharma Laminar Flow Straddle Units, Single and Double
More from Công ty TNHH Thương Mại Quốc Tế ICD
Lọc khí Vari cel v_1
This document provides specifications for Varicel V air filters made by AAF Malaysia. It lists various sizes and models of filters with their dimensions, rated airflow capacities, and efficiency levels. The filters are available in 95%, 80%, and 70% average efficiency models. They are constructed from plastic, anodized separators, and water-repellent micro fine glass fibers as the media.
Lọc khí Tm 2 tm-4 afp-1-475
This document provides information on the TM-2 and TM-4 ducted, disposable ceiling filter modules for cleanroom applications. It summarizes that the TM-2 is a lower cost filtration module for class 100,000 to 10 cleanrooms, while the TM-4 is designed for higher efficiency class 100 to 1 cleanrooms. Both modules feature lightweight designs, adjustable distribution plates, integral grilles, and mini-pleat filter packs for high filtration performance. The document provides details on construction, installation, performance specifications and efficiency options for the TM-2 and TM-4 series ceiling filter modules.
Lọc khí Saafcarb%20mc%20gpf 1-114
The SAAFCarb MC media is a non-toxic, disposable media made of porous pellets used to scrub chlorine gas from air streams. The pellets are formed from activated carbon, alumina, and binders impregnated to enhance chlorine removal capacity. The media chemisorptively removes gases through adsorption, absorption and chemical reaction, changing the gases into harmless solids. It is designed to remove a minimum of 10% of chlorine gas by weight.
Rolomatic
The Roll-O-Matic is a heavy-duty automatic renewable media air filter that requires little maintenance. It uses a spool system to advance high quality filter media evenly so that unfiltered air does not bypass the media. The basic components include an upper dispensing unit that houses the clean media roll, a lower rewind unit for the used media, guide rods and rollers to keep the media flat, and a motor and controls to advance the media automatically.
Rollomatgold
Roll-O-Mat produces various types of automatic roll filter media for air filters, including Roll-O-Mat Gold, Blue, Green, and Red. The different media types vary in material (fiberglass or synthetic fibers), thickness (1/2 to 2 inches), adhesive coating, and maximum operating temperature (up to 300°F for Roll-O-Mat Red). All media are 65 feet long and have a tinted side to indicate air flow direction. Roll-O-Mat Gold has the highest fiber density and compression strength for maximum filtration performance.
Rollo mat
The document summarizes Roll-O-Mat, a high-quality roll filter media that is suitable for use in automatic roll filters from AAF and other manufacturers. It has a progressive density construction that enables dirt particles to be captured throughout its depth, maintains its form during use, and has a high dust holding capacity. It is made of coated glass fibers bonded with thermoset resin and is available in different widths and lengths to accommodate various installation needs.
Roll o matic installation & maintenance guide rev2
This document provides installation and maintenance instructions for the Roll-O-Matic G5 automatic air filter. It describes the components, specifications and dimensions of the filter. It also provides details on installing the renewable media roll, making duct connections, electrical wiring and control arrangements. Maintenance instructions include lubrication, media replacement procedures and recommended spare parts.
Pharma gel (afp 1-408b)
The document summarizes the features of the PharmaGel HEPA filter module. It includes an airtight gel seal that forms around the filter to prevent leaks. The filter is held securely in place by four retainers that turn 90 degrees to easily replace the filter cartridge. The module housing is constructed of sturdy welded aluminum and can be used for either vertical or horizontal airflow applications.
Front line%20afp 1-228d
FrontLine is a line of fiberglass air filter media from AAF International designed for different operating conditions and dirt loading levels. FrontLine Gold is designed for the toughest conditions and highest performance. It has very high compression strength from a bonded fiber construction. FrontLine Blue and Green are for high and medium performance conditions, respectively. FrontLine Red is designed for higher temperature applications up to 250°F. The document provides details on the construction, adhesive, fiber content, and performance specifications of each type of FrontLine media.
Amer sorbafp 1-190a
This document discusses different types of activated carbon filters and their uses. It describes several adsorbent media options for chemical air filtration, including granular activated carbon (GAC), potassium permanganate, and blends. It also provides details on various carbon filter housings, trays, inserts and panels that can be used with the different adsorbent media depending on the application and types of gases and odors needing removal. Key information highlighted includes the different filter materials used, their odor removal capabilities, and housing features that allow for easy access and replacement of filter components.
Ag28
The document describes AG-28 paint arrestor pads. It discusses how the open weave fiber pattern holds more paint and collects it throughout the full depth of the pad, extending the pad's life. Clean exhaust air flows through due to the thermoset resin preventing collapse. The continuous glass fibers force paint to change directions, collecting on the fibers while cleaner air flows through. AG-28 pads can be changed quickly and fit standard holding frames with no new accessories needed.
Afffu
The AstroFan FFU is a self-contained ceiling filter fan unit designed for use in cleanroom areas. It has low energy consumption and operating costs while providing high static pressure and airflow. The unit comprises a steel or aluminum housing, backward curved fan and motor, and replaceable HEPA or ULPA filter. It is available with traditional AC motors or more efficient EC motors, and various control and interface options.
Atexr
This document provides information on the AmerTex R-Series air filter media line. It describes the various synthetic and natural media types, their recommended applications, cleaning methods, and technical specifications. The R-Series media features an exclusive bonding technology, low airflow resistance, and high dust holding capacity. Media types include R15 Economy, R17 Durable, R29 Standard, R50 Super, and the natural R20 media. They are suitable for applications like air conditioners, ventilation systems, and paint spray booths. The media can be cleaned by washing or blowing with compressed air.
Atexf
This document summarizes information about the AmerTex F-Series air filter media. It describes three versions - F30, F55, and F60 - that are suitable for paint spray and drying booth applications and require fine filtration. The F30 medium can be used as a prefilter, while the F55 and F60 are recommended for applications needing higher air cleanliness. All are made of fine synthetic fibers in a multi-layer structure, are white in color, fire retardant, and come in rolls to fit various filter surface areas.
Lọc khí 5700 afp-1-108 f
The document describes heavy duty panel filters ("5700" filters) that are designed for general air filtration in industrial and commercial HVAC systems where dust loading is heavy. The filters have a heavy duty chipboard frame bonded to metal retainers on both sides of a dense fiberglass media pad. For additional rigidity, a stiffener bar is bonded to the center of the frame. The media contains more glass fibers per square foot than standard filters, providing greater surface area to catch particles. The progressively denser media construction enables the filters to hold more dirt throughout the depth.
Dri pak25
The document describes the DriPak® 25 synthetic pocket filter. It has a high dust holding capacity and robust pocket design that makes it suitable for difficult conditions. As a prefilter, it protects higher efficiency filters and prolongs their service life, reducing maintenance needs. It has a low resistance to airflow and is classified as a G4 filter according to EN779 standards. Technical data and specifications for the filter are provided, including dimensions, airflow capacities, and resistance levels.
Ast 3 4000
The AstroCel III 4000 air filter can handle air volumes up to 4000 m3/h. It is classified as H12 or H13 under EN1822 standards, exhibiting excellent efficiency on fine particulate matter. Due to its high capacity, the filter requires less installation space and time compared to smaller HEPA filters processing the same air volume. It also has a low pressure drop, reducing energy costs for existing installations.
Ast 3 3400
The AstroCel III 3400 MDF filter is classified as H12 or H13 according to EN1822 standards, displaying excellent efficiency on fine particulate matter. It has a high capacity of 3400 m3/h, allowing fewer filters to handle the same air volume as lower capacity HEPA filters, saving on installation space and time. Its high media area also results in low pressure drop and reduced energy consumption. Additional benefits include a smooth, non-shedding construction from MDF cell sides and easy installation.
More from Công ty TNHH Thương Mại Quốc Tế ICD (19)
Roll o matic installation & maintenance guide rev2
Roll o matic installation & maintenance guide rev2
Astro vee
- 1. Better Air is Our BusinessR AstroVee High Efficiency Particulate Air Filters (HEPA) Rigid Construction Improves Performance Under Turbulent Operating Conditions High air volume capacity H12 and H13 to EN1822 AstroVee is a heavy duty, high efficiency particulate air filter (HEPA) designed for both Constant Air Volume (CAV) and Variable Air Volume (VAV) systems. The AstroVee filter is made of multiple mini pleat media packs assembled in a V-shaped configuration, into an electro-galvanized steel housing with an aluminium flange at the air entry side. This configuration substantially increases the amount of media contained in the filter over conventional rigid type filter. In existing installations, the filter’s high media area ensures lowpressure drop, which reduces energy cost. The filter is designed for installation in AHU’s. It is suitable for use in hospital operating theatres, semi-conductor, microelectronic, food and pharmaceutical industries and gasturbine inlet applications where airborne contaminants must be carefully controlled. The rigid metal construction improves performance under turbulent operating conditions. The AstroVee is ideal for extremely difficult conditions such as high turbulence and frequent fan shut down. High Air Volume Capacity The filter is designed for use in high air volume applications up to 4000 m3/h. Its high capacity design provide competitive advantage to other conventional HEPA filter of the same size; fewer filters are required to handle the same volume of air in the systems, which reduces costs, installation space and time. For system operating at lower velocities, the AstroVee service life will be significantly prolonged thus reducing the operating cost further. High Capacity, Mini-Pleat Design The AstroVee is made from ultra fine, moisture resistance and fire retardant fiberglass media. Separators made from special thermoplastic beads maintain even spacing between pleats for optimal airflow with minimal air resistance. The consistent pleat spacing of the media allows higher dust holding capacity and full use of the entire depth of the media. Classification All AstroVee HEPA filters are classified H12 or H13 to EN1822.
- 2. AstroVee Specification Tel: 03-5569 2633 / Fax: 03-5569 3633 No. 9 (Lot 136), Jalan Juru Ukur U1/19, Hicom-Glenmarie Industrial Park, 40150 Shah Alam, Selangor Darul Ehsan, Malaysia. www.aafasia.com ISO-9001 Certified Firm ©2006 AAF Malaysia AV-01-MAL/OCT , 06 AAF has a policy of continuous product research and improvement and reserves the right to change design and specifications without notice. Better Air is Our BusinessR Standard Sizes and Ratings Size in mm without gasket Media area Nominal airflow 287 292592 15 1500 592 292592 30 3400 m2 H W D m3/h Efficiency Efficiency @ 0.3 μm Efficiency EN1822 @ MPPS 99.97% 99.5% 99.99% 99.95% H12 H13 Maximum Operating Temperature : 70°C (158°F) Media : High efficiency, water resistant glass fibre Separators : Hot melt Cell sides and Header : Galv. steel and extruded aluminium Gasket : Gasket on clean air side as standard Notes: - Final resistance 750 Pa. - Initial resistance at nominal airflow: 275 Pa. - Filters can operate up to 125% of rated volume Airflow Versus Resistance InitialResistance(Pa) Airflow (m3/h) 592x592 287x592 0 50 100 150 200 250 300 350 400 450 0 1000 2000 3000 4000 5000 Selection Table Component Definition Component 34 Size Code A Efficiency 2 Gasket S Cellsides Material Component Code Definition Please refer to AAF sales office for size code A = 99.99% 0.3μm B = 99.995% 0.3μm C = 99.97% 0.3μm D = Special 0 = No Gasket 1 = Upstream 2 = Downstream 3 = Both sides 4 = Special requirement S = Standard (Black Powder Coat GI) T = Special An AstroVee can be ordered using the following Style Code. Use the table to specify a product suitable to your application requirements. Example: 34 - A - 2 - S