Assignment guides
•
2 likes•401 views
This document provides instructions for a 1500-word report on drilling engineering systems for a Drilling Engineering II course. Students are asked to discuss 6 interrelated drilling systems and how the design and operation of each system impacts safety, quality, and efficiency of the drilling operation. The report must be submitted by email by December 16th and include sections on planning, achievement, attitude and understanding, quality of presentation, and references. Plagiarism is not permitted and late submissions within 7 days will only receive a pass mark.
Report
Share
Report
Share
Download to read offline
Recommended
Project guideline for 4th stage students
This document provides guidance to students on completing their final year project at Koya University's Faculty of Engineering, School of Chemical and Petroleum Engineering, Petroleum Department. It covers various aspects of project development and presentation, including working with supervisors, general project structure and style, typographical design, referencing, plagiarism, and oral presentation requirements. Students are expected to complete an original research project of around 60 pages in length on an approved topic relating to their field of study.
The format for_the_project__training_report
This document provides guidelines and formatting requirements for a project report submitted for a B.Tech degree in Electronics and Communication Engineering. It includes specifications for the cover page, declaration by the student, certificate by the guide, acknowledgements, abstract, table of contents, body of the report divided into chapters, appendices, references, numbering of equations, and presentation guidelines. The report should be between 40-60 pages, bound with maroon cardboard and lamination, and include the required sections in the specified format.
Technical Report Writing (Format of Final year project's thesis)
The document provides guidelines for formatting a technical report for a final year project. It outlines the required sections which include a cover page, title page, declaration, acknowledgements, abstract, table of contents, list of figures, list of tables, body, references, and appendices. The body will present an introduction, sections on the topic, and a conclusion with cited sources and graphics. The guidelines provide examples and formatting instructions for each section.
Technical report writing
This document provides guidelines for writing formal technical reports for mechanical engineering courses. It discusses the typical sections of a lab report, including the title page, objective, background, experiment, results, and conclusions. It provides formatting requirements for reports, such as using a 12-point font, one-inch margins, and double spacing. Guidelines are provided for writing style, including using passive voice, present tense for certain sections, and avoiding first person pronouns. The document also discusses effectively formatting tables, figures, equations, and references in reports.
Part of Report furqan m lodhi
The document outlines the typical parts of a technical report, including the title page, table of contents, executive summary, introduction, discussion, conclusions, recommendations, bibliography/references, and appendices. It then provides more details on each individual part and what they typically include. The document also lists the names of the group members presenting on this topic and provides some extra information on numbering, margins, and whether certain parts should come before or after others in the report.
Chapter 04 part 2 Tech. Writing 2014-2015
This document discusses the methodology for writing technical reports. It covers planning reports, using illustrations and organizing content. Key sections include organizing content with consistent numbering, referencing ideas and sources, and using appendices for supplemental information. The document also differentiates between reference styles and covers editing reports for spelling, grammar, logic and completeness.
Attachment
The document provides guidelines for submitting a major project report after completing a student project. It specifies that the report should include sections for the cover page, title page, declaration, certificate, abstract, table of contents, detailed project description with diagrams and tables, conclusion, recommendations, references, and appendices. It also provides details on report formatting, binding, number of copies to submit, paper size, margins, fonts, spacing, pagination, and required contents for the accompanying CD. Annexures with sample templates are provided for the cover page, title page, declaration, certificate, and table of contents.
Final report presentation
The document provides guidelines for structuring a usability report as a hybrid presentation and written report. It should include a title page, table of contents, executive summary, introduction, methodology, findings, recommendations, conclusion, author info, and appendix. The executive summary is a high-level overview of one page. The introduction states the research purpose and previews sections. Methodology describes procedures, measures, and participants. Findings presents aggregated and task-specific results and identifies usability issues. Recommendations lists issues and proposed interface changes. The conclusion summarizes key takeaways. Formatting should be scannable and use visual elements like tables and graphs. A presentation covers methods, findings, issues, and recommendations in 15
Recommended
Project guideline for 4th stage students
This document provides guidance to students on completing their final year project at Koya University's Faculty of Engineering, School of Chemical and Petroleum Engineering, Petroleum Department. It covers various aspects of project development and presentation, including working with supervisors, general project structure and style, typographical design, referencing, plagiarism, and oral presentation requirements. Students are expected to complete an original research project of around 60 pages in length on an approved topic relating to their field of study.
The format for_the_project__training_report
This document provides guidelines and formatting requirements for a project report submitted for a B.Tech degree in Electronics and Communication Engineering. It includes specifications for the cover page, declaration by the student, certificate by the guide, acknowledgements, abstract, table of contents, body of the report divided into chapters, appendices, references, numbering of equations, and presentation guidelines. The report should be between 40-60 pages, bound with maroon cardboard and lamination, and include the required sections in the specified format.
Technical Report Writing (Format of Final year project's thesis)
The document provides guidelines for formatting a technical report for a final year project. It outlines the required sections which include a cover page, title page, declaration, acknowledgements, abstract, table of contents, list of figures, list of tables, body, references, and appendices. The body will present an introduction, sections on the topic, and a conclusion with cited sources and graphics. The guidelines provide examples and formatting instructions for each section.
Technical report writing
This document provides guidelines for writing formal technical reports for mechanical engineering courses. It discusses the typical sections of a lab report, including the title page, objective, background, experiment, results, and conclusions. It provides formatting requirements for reports, such as using a 12-point font, one-inch margins, and double spacing. Guidelines are provided for writing style, including using passive voice, present tense for certain sections, and avoiding first person pronouns. The document also discusses effectively formatting tables, figures, equations, and references in reports.
Part of Report furqan m lodhi
The document outlines the typical parts of a technical report, including the title page, table of contents, executive summary, introduction, discussion, conclusions, recommendations, bibliography/references, and appendices. It then provides more details on each individual part and what they typically include. The document also lists the names of the group members presenting on this topic and provides some extra information on numbering, margins, and whether certain parts should come before or after others in the report.
Chapter 04 part 2 Tech. Writing 2014-2015
This document discusses the methodology for writing technical reports. It covers planning reports, using illustrations and organizing content. Key sections include organizing content with consistent numbering, referencing ideas and sources, and using appendices for supplemental information. The document also differentiates between reference styles and covers editing reports for spelling, grammar, logic and completeness.
Attachment
The document provides guidelines for submitting a major project report after completing a student project. It specifies that the report should include sections for the cover page, title page, declaration, certificate, abstract, table of contents, detailed project description with diagrams and tables, conclusion, recommendations, references, and appendices. It also provides details on report formatting, binding, number of copies to submit, paper size, margins, fonts, spacing, pagination, and required contents for the accompanying CD. Annexures with sample templates are provided for the cover page, title page, declaration, certificate, and table of contents.
Final report presentation
The document provides guidelines for structuring a usability report as a hybrid presentation and written report. It should include a title page, table of contents, executive summary, introduction, methodology, findings, recommendations, conclusion, author info, and appendix. The executive summary is a high-level overview of one page. The introduction states the research purpose and previews sections. Methodology describes procedures, measures, and participants. Findings presents aggregated and task-specific results and identifies usability issues. Recommendations lists issues and proposed interface changes. The conclusion summarizes key takeaways. Formatting should be scannable and use visual elements like tables and graphs. A presentation covers methods, findings, issues, and recommendations in 15
Chapter 05 Tech. Writing 2014-2015
Formal reports are used to document experiments, designs, and other technical information for specific audiences. They have a standardized structure including a front matter with title page, abstract, and table of contents, main text with introduction, discussion, and conclusion sections, and back matter with appendices, references, and glossary. Informal reports are shorter, for internal use without predefined sections, and distinguishable from formal reports by their format and audiences. Formal reports present information in an organized, logical manner for readers outside the organization using clear language.
structure of research report
This document defines research and outlines the typical structure of a research report. Research is defined as a systematic investigation into a topic using scientific methods to establish facts and reach conclusions. A research report contains the key aspects of a research project and presents relevant information on the work carried out, which can be handwritten, typed or computerized. The standard format of a research report includes introductory pages such as a cover page, abstract, acknowledgements and table of contents. The main body includes chapters such as an introduction, literature review, methodology, data analysis and conclusion. Appendices provide additional details like questionnaires and bibliographies.
Chapter 06 Technical Writing 2014-2015
This document discusses different types of technical reports, including laboratory reports, periodic reports, design reports, proposals, and field reports. It provides details on the purpose and typical sections included in each type of report. For laboratory reports, it describes the differences between academic and industrial reports and discusses ethics, audience, and common sections. It also covers activity reports, progress reports, and annual reports as examples of periodic reports.
Complete and detailed description of the mini projects reports
This document provides guidelines for students completing an industry-oriented mini project as part of their B-Tech degree program. Students must complete a mini project either individually or in small batches, on a topic related to their field of study. They must submit a project proposal and be assigned an advisor. The mini project report should be 20-30 pages and follow a specified format including title page, table of contents, acknowledgements, abstract, lists of figures and tables. It will be evaluated by a committee including an external examiner. The mini project aims to provide students with practical experience applying their classroom learning to industry problems.
Report Writing
This document outlines the key components of a report and how to structure one effectively. It discusses that a report presents specific information in a clear format to address a problem or issue. The standard structure includes an introduction, main body with sections, conclusion, recommendations, references, and appendices. Using a template can save time when creating multiple reports with similar elements.
Manual2013 pr (1)
This document provides guidelines for MBA students at Dr MGR Educational and Research Institute University for preparing their final year project reports. It outlines the general requirements for the report format and contents, including the number of copies to submit, page dimensions and margins, arrangement of chapters and appendices, and instructions for typing, numbering, binding etc. Appendices provide sample templates for the report cover page, title page, declaration, contents listing, and other elements. The guidelines are intended to help students organize their project reports in an orderly, scholarly manner according to the University's standards.
presentation.ppt2
The document summarizes a workshop presentation on report writing skills and presentation techniques. It covers the structure and content of technical reports, including introductions, types of reports, formatting, references, characteristics of good reports, drafting, and common pitfalls. It also discusses presentation skills like structuring, delivery, and handling questions.
4 year bbs_project_procedures_779816
This document outlines the procedures and formatting requirements for a final project report for a Bachelor of Business Studies program. It details that students are responsible for writing and submitting an original project report following the specified guidelines. This includes preparing a proposal, working with a supervisor, adhering to formatting standards, and submitting drafts to the research committee for review and approval. The report must include chapters on the introduction, literature review, research methods, results and findings, and a discussion and conclusion section. Strict formatting standards for fonts, spacing, pagination, headings, and preliminary pages are also provided.
Guidelines for thesis preparation 3
This document provides guidelines for the preparation of research reports, dissertations, and theses at the University of Malaya. It outlines the standard format which includes preface, text, and supplementary sections. The preface section includes elements like the title page, abstract, table of contents, and lists. The text section covers chapters such as introduction, literature review, and conclusion. The supplementary section includes appendices and publications. The document provides examples and specifications for formatting, structure, style, and submission of final research documents.
Writing Reports
The document provides a template and guidelines for writing an explanation report. It outlines the key components including a title, definition, description of parts, explanation of how it works, and optional comments. As an example, it then provides a sample explanation report on how a windmill works, following the template structure of title, definition, description of parts, operations, and applications. It concludes by asking students to write their own explanation report on dinosaurs using the facts sheet and template provided.
4.02a Student Notes
The document provides information on understanding charts and graphs used in business, including defining the difference between charts and graphs, explaining the purpose of charts, listing commonly used business charts and why they are used, and describing the components and types of charts. Key points covered include that charts visually communicate spreadsheet data through labels, titles and colors, and common charts include column, stacked bar, line, pie, and XY scatter charts which are used to analyze trends, comparisons, and correlations.
Capillary suction-timers
This document describes an experiment to evaluate the capillary suction time (CST) test for measuring sludge dewaterability. The objectives were to evaluate alternative test apparatus designs and procedures to improve precision and reduce costs. The CST test measures the time for filtrate to travel between electrodes using a filter paper under suction. Variables tested included funnel geometry, filter paper type, stirring, temperature, and sludge concentration. The results could help recommend improved CST test methods.
Rheological properties using model 900 viscometer
The document describes procedures for determining rheological properties using a Model 900 viscometer. It outlines the aim, theory of operation, apparatus used, calibration procedures, testing procedures in both manual and automatic modes using accompanying software, and references. The viscometer measures properties like temperature, shear stress, viscosity, shear rate, and RPM by monitoring the angular displacement of a bob submerged in a test fluid under different rotational speeds.
Petroleum Eng world of Difference
The document provides an overview of the history and use of fossil fuels from ancient times to the present day, when fossil fuels still make up the vast majority of energy consumption globally. It discusses key events and innovations that drove increased fossil fuel usage, particularly the rise of oil due to developments like the automobile. The roles of geoscientists and petroleum engineers in exploring for and producing oil and gas reserves are also summarized.
Styleguide
The Society of Petroleum Engineers (SPE) produces publications for engineers worldwide. Clear writing is essential due to the international audience. SPE's style guide promotes clarity, conciseness, accuracy, and consistency. It provides guidelines on abbreviations, numbers, punctuation, and other elements of technical papers. While the style guide is intended for SPE's own publications, others may also find it helpful. The objective is to define SPE's treatment of style questions, not establish a broadly applicable industry standard.
Liquid permeability
This document describes a procedure for determining the liquid permeability of a core sample using a liquid permeability device. The test involves applying confining pressure and nitrogen gas pressure to the core sample to force water through it. The time required to fill graduated flasks of different volumes is measured and entered into a template spreadsheet to calculate permeability based on Darcy's law. Potential sources of error are leakage through pores allowing gas to escape and not accounting for temperature effects.
FORMATION RESISTIVITY
1) The document describes an experiment to measure the resistivity of coarse, medium, and fine sands to determine resistivity index I, formation factor F, cementation factor M, and saturation exponent n.
2) Resistivity was measured for each sand at 100% and partial water saturation. Formation factor F was calculated, and a graph of log(F) vs log(porosity) was plotted to obtain cementation factor M.
3) A graph of resistivity index I vs water saturation Sw was also plotted to obtain saturation exponent n for each sand.
Permebility and Porosity
This document summarizes the results of experiments measuring permeability and porosity in rock samples. It discusses determining absolute permeability using Darcy's law and plotting flow rate versus pressure difference. Relative permeability of oil and water was also calculated using Darcy and Corey methods. The Corey method was found to be more accurate as it showed relative permeability depends on water saturation. Porosity experiments involved measuring bulk volume geometrically and through buoyancy, and pore volume to calculate porosity. Permeability decreased with increasing flow rate.
Mud weighting
1. The experiment aimed to prepare a mud with a known density and then increase its density by adding barite. Barite has a high specific gravity of 4.2, which allows mud density to be increased up to 21 pounds per gallon.
2. Procedures involved mixing bentonite and water to form a mud, then weighing and adding barite while stirring. The mud balance measured the initial and final mud densities.
3. Barite is the most common weighting agent due to its ability to significantly increase mud density up to 21 ppg, control formation pressures, and stability. It is also inert, readily available, and not classified as hazardous.
Kick t1
my presentation about kick tolerance and contain 3 videos
the reference (well drilling & construction) Hussain Rabia
and weatherford essay & videos from youtube
Field Development Project Report - EAB_7_157
The aim of this project was to evaluate and propose the best development plan for a shallow offshore oilfield located in the Northern North Sea using a provided 3D static reservoir model. The field was interpreted to have major normal faulting and folding likely due to Jurassic rifting. Key formations included thick sandstones of the Brent Group deposited in a deltaic environment. Reservoir properties showed heterogeneity with porosity 2-37% and permeability 50-700 mD. An estimated 373 MMSTB of oil initially in place was determined. Sensitivity analysis on transmissibility was conducted to understand fault properties. The proposed plan was to develop the field with 8 vertical producer wells and 2 water injector wells to achieve 30% recovery over 20 years
More Related Content
What's hot
Chapter 05 Tech. Writing 2014-2015
Formal reports are used to document experiments, designs, and other technical information for specific audiences. They have a standardized structure including a front matter with title page, abstract, and table of contents, main text with introduction, discussion, and conclusion sections, and back matter with appendices, references, and glossary. Informal reports are shorter, for internal use without predefined sections, and distinguishable from formal reports by their format and audiences. Formal reports present information in an organized, logical manner for readers outside the organization using clear language.
structure of research report
This document defines research and outlines the typical structure of a research report. Research is defined as a systematic investigation into a topic using scientific methods to establish facts and reach conclusions. A research report contains the key aspects of a research project and presents relevant information on the work carried out, which can be handwritten, typed or computerized. The standard format of a research report includes introductory pages such as a cover page, abstract, acknowledgements and table of contents. The main body includes chapters such as an introduction, literature review, methodology, data analysis and conclusion. Appendices provide additional details like questionnaires and bibliographies.
Chapter 06 Technical Writing 2014-2015
This document discusses different types of technical reports, including laboratory reports, periodic reports, design reports, proposals, and field reports. It provides details on the purpose and typical sections included in each type of report. For laboratory reports, it describes the differences between academic and industrial reports and discusses ethics, audience, and common sections. It also covers activity reports, progress reports, and annual reports as examples of periodic reports.
Complete and detailed description of the mini projects reports
This document provides guidelines for students completing an industry-oriented mini project as part of their B-Tech degree program. Students must complete a mini project either individually or in small batches, on a topic related to their field of study. They must submit a project proposal and be assigned an advisor. The mini project report should be 20-30 pages and follow a specified format including title page, table of contents, acknowledgements, abstract, lists of figures and tables. It will be evaluated by a committee including an external examiner. The mini project aims to provide students with practical experience applying their classroom learning to industry problems.
Report Writing
This document outlines the key components of a report and how to structure one effectively. It discusses that a report presents specific information in a clear format to address a problem or issue. The standard structure includes an introduction, main body with sections, conclusion, recommendations, references, and appendices. Using a template can save time when creating multiple reports with similar elements.
Manual2013 pr (1)
This document provides guidelines for MBA students at Dr MGR Educational and Research Institute University for preparing their final year project reports. It outlines the general requirements for the report format and contents, including the number of copies to submit, page dimensions and margins, arrangement of chapters and appendices, and instructions for typing, numbering, binding etc. Appendices provide sample templates for the report cover page, title page, declaration, contents listing, and other elements. The guidelines are intended to help students organize their project reports in an orderly, scholarly manner according to the University's standards.
presentation.ppt2
The document summarizes a workshop presentation on report writing skills and presentation techniques. It covers the structure and content of technical reports, including introductions, types of reports, formatting, references, characteristics of good reports, drafting, and common pitfalls. It also discusses presentation skills like structuring, delivery, and handling questions.
4 year bbs_project_procedures_779816
This document outlines the procedures and formatting requirements for a final project report for a Bachelor of Business Studies program. It details that students are responsible for writing and submitting an original project report following the specified guidelines. This includes preparing a proposal, working with a supervisor, adhering to formatting standards, and submitting drafts to the research committee for review and approval. The report must include chapters on the introduction, literature review, research methods, results and findings, and a discussion and conclusion section. Strict formatting standards for fonts, spacing, pagination, headings, and preliminary pages are also provided.
Guidelines for thesis preparation 3
This document provides guidelines for the preparation of research reports, dissertations, and theses at the University of Malaya. It outlines the standard format which includes preface, text, and supplementary sections. The preface section includes elements like the title page, abstract, table of contents, and lists. The text section covers chapters such as introduction, literature review, and conclusion. The supplementary section includes appendices and publications. The document provides examples and specifications for formatting, structure, style, and submission of final research documents.
Writing Reports
The document provides a template and guidelines for writing an explanation report. It outlines the key components including a title, definition, description of parts, explanation of how it works, and optional comments. As an example, it then provides a sample explanation report on how a windmill works, following the template structure of title, definition, description of parts, operations, and applications. It concludes by asking students to write their own explanation report on dinosaurs using the facts sheet and template provided.
4.02a Student Notes
The document provides information on understanding charts and graphs used in business, including defining the difference between charts and graphs, explaining the purpose of charts, listing commonly used business charts and why they are used, and describing the components and types of charts. Key points covered include that charts visually communicate spreadsheet data through labels, titles and colors, and common charts include column, stacked bar, line, pie, and XY scatter charts which are used to analyze trends, comparisons, and correlations.
What's hot (11)
Complete and detailed description of the mini projects reports
Complete and detailed description of the mini projects reports
Viewers also liked
Capillary suction-timers
This document describes an experiment to evaluate the capillary suction time (CST) test for measuring sludge dewaterability. The objectives were to evaluate alternative test apparatus designs and procedures to improve precision and reduce costs. The CST test measures the time for filtrate to travel between electrodes using a filter paper under suction. Variables tested included funnel geometry, filter paper type, stirring, temperature, and sludge concentration. The results could help recommend improved CST test methods.
Rheological properties using model 900 viscometer
The document describes procedures for determining rheological properties using a Model 900 viscometer. It outlines the aim, theory of operation, apparatus used, calibration procedures, testing procedures in both manual and automatic modes using accompanying software, and references. The viscometer measures properties like temperature, shear stress, viscosity, shear rate, and RPM by monitoring the angular displacement of a bob submerged in a test fluid under different rotational speeds.
Petroleum Eng world of Difference
The document provides an overview of the history and use of fossil fuels from ancient times to the present day, when fossil fuels still make up the vast majority of energy consumption globally. It discusses key events and innovations that drove increased fossil fuel usage, particularly the rise of oil due to developments like the automobile. The roles of geoscientists and petroleum engineers in exploring for and producing oil and gas reserves are also summarized.
Styleguide
The Society of Petroleum Engineers (SPE) produces publications for engineers worldwide. Clear writing is essential due to the international audience. SPE's style guide promotes clarity, conciseness, accuracy, and consistency. It provides guidelines on abbreviations, numbers, punctuation, and other elements of technical papers. While the style guide is intended for SPE's own publications, others may also find it helpful. The objective is to define SPE's treatment of style questions, not establish a broadly applicable industry standard.
Liquid permeability
This document describes a procedure for determining the liquid permeability of a core sample using a liquid permeability device. The test involves applying confining pressure and nitrogen gas pressure to the core sample to force water through it. The time required to fill graduated flasks of different volumes is measured and entered into a template spreadsheet to calculate permeability based on Darcy's law. Potential sources of error are leakage through pores allowing gas to escape and not accounting for temperature effects.
FORMATION RESISTIVITY
1) The document describes an experiment to measure the resistivity of coarse, medium, and fine sands to determine resistivity index I, formation factor F, cementation factor M, and saturation exponent n.
2) Resistivity was measured for each sand at 100% and partial water saturation. Formation factor F was calculated, and a graph of log(F) vs log(porosity) was plotted to obtain cementation factor M.
3) A graph of resistivity index I vs water saturation Sw was also plotted to obtain saturation exponent n for each sand.
Permebility and Porosity
This document summarizes the results of experiments measuring permeability and porosity in rock samples. It discusses determining absolute permeability using Darcy's law and plotting flow rate versus pressure difference. Relative permeability of oil and water was also calculated using Darcy and Corey methods. The Corey method was found to be more accurate as it showed relative permeability depends on water saturation. Porosity experiments involved measuring bulk volume geometrically and through buoyancy, and pore volume to calculate porosity. Permeability decreased with increasing flow rate.
Mud weighting
1. The experiment aimed to prepare a mud with a known density and then increase its density by adding barite. Barite has a high specific gravity of 4.2, which allows mud density to be increased up to 21 pounds per gallon.
2. Procedures involved mixing bentonite and water to form a mud, then weighing and adding barite while stirring. The mud balance measured the initial and final mud densities.
3. Barite is the most common weighting agent due to its ability to significantly increase mud density up to 21 ppg, control formation pressures, and stability. It is also inert, readily available, and not classified as hazardous.
Kick t1
my presentation about kick tolerance and contain 3 videos
the reference (well drilling & construction) Hussain Rabia
and weatherford essay & videos from youtube
Field Development Project Report - EAB_7_157
The aim of this project was to evaluate and propose the best development plan for a shallow offshore oilfield located in the Northern North Sea using a provided 3D static reservoir model. The field was interpreted to have major normal faulting and folding likely due to Jurassic rifting. Key formations included thick sandstones of the Brent Group deposited in a deltaic environment. Reservoir properties showed heterogeneity with porosity 2-37% and permeability 50-700 mD. An estimated 373 MMSTB of oil initially in place was determined. Sensitivity analysis on transmissibility was conducted to understand fault properties. The proposed plan was to develop the field with 8 vertical producer wells and 2 water injector wells to achieve 30% recovery over 20 years
Mud density
This document summarizes a student's fluid mechanics lab experiment on measuring mud density. The aim was to learn how to use a mud balance apparatus to measure the density of drilling mud and see how density changes with the addition of barite. The student first prepared a bentonite mud and measured its density. Barite was then added to increase the mud density, which was remeasured. Understanding mud density is important for maintaining proper hydrostatic pressure to prevent fluid influx from formations during drilling.
General overview of Petroleum Engineering Depatment
In this presentation we were trying to give our departments fresh students a quick introduction about university, dormotory, petroleum engineering, study tips and other neccesary stufs for first stage students.
Rheology of Fluids Hydraulic Calculations & Drilling Fluid (Mud) Filtration T...
This document summarizes two experiments conducted to investigate the rheology of drilling fluids and their filtration properties. In Experiment 2, the rheological behavior of two mud samples (Mud A and Mud B) was analyzed using a viscometer. Both muds exhibited similar shear thinning properties and were best described by the Herschel-Bulkley and power law rheological models. In Experiment 3, the filtration properties of the two muds were examined by measuring filter cake buildup and fluid invasion over time. Key results showed that the muds had similar rheology and filtration behavior.
Drilling fluid
This document provides an overview of drilling fluids and their role in drilling operations. It discusses the components and properties of drilling fluids, including continuous and dispersed phases as well as additives. The types of drilling fluids are described, including water-based muds, oil-based muds, gases, and gas-liquid mixtures. The key functions of drilling fluids to support drilling operations are also outlined. The document concludes with discussions of pressure terminologies and examples of calculations related to drilling fluid properties and components.
Specific gravity by weight
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise boosts blood flow, releases endorphins, and promotes changes in the brain which help regulate emotions and stress levels.
Drilling fluids
my presentation about drilling fluids and contain 5 videos
the reference (well drilling & construction) Hussain Rabia
and some videos from youtube
Drilling Mud Laboratory
This document discusses drilling mud, including its types, composition, properties, functions, and laboratory/field testing. It describes water-based muds and oil-based muds as the two main types, and their components such as liquids, solids, and chemicals. Key properties covered include density, viscosity, filtration, and gel strength. Important functions of drilling mud include hole cleaning, pressure control, cooling and lubrication. Common laboratory tests to evaluate mud properties and performance include measuring density, rheology, filtration, sand content, resistivity, and pH.
Viewers also liked (18)
General overview of Petroleum Engineering Depatment
General overview of Petroleum Engineering Depatment
Rheology of Fluids Hydraulic Calculations & Drilling Fluid (Mud) Filtration T...
Rheology of Fluids Hydraulic Calculations & Drilling Fluid (Mud) Filtration T...
Similar to Assignment guides
BAIT1003 Assignment
This document provides details for an assignment on proposing a computer systems upgrade for an engineering consultancy firm. Students are asked to review and compare specifications of two computer system brands that could fulfill the firm's requirements. They must propose a procurement plan listing the hardware, software, and justifications for their selection. The presentation of the report must follow specific guidelines, including a submission form, plagiarism statement, contents page, and references in Harvard style. Marks will be awarded based on the detailed criteria provided.
Final reportguidelines
The document provides guidelines for the final report and presentation for an engineering senior design course. It specifies the required sections and formatting for the final report, including a cover page, introduction, system requirements, architectural overview, detailed design, results and conclusion, and references. It states the final report should be a maximum of 10 pages, double-spaced, with 12 point font. Additional details are provided on requirements, submission process, and presentation guidelines.
i just need these revisedWeek 7 Assignment 2.3 - Submit He.docx
i just need these revised
Week 7 Assignment 2.3 - Submit Here
Students
, please view the "Submit a Clickable Rubric Assignment" video in the Student Center.
Instructors
, training on how to grade is within the Instructor Center.
Assignment 2.3: Justification Report – Part 3 (Final)
Due Week 7 and worth 180 points
In Assignments 2.1 (Part 1) and 2.2 (Part 2) of the Justification Report, you built up the major parts of your formal, researched justification report (Problem Statement, Overview of Alternatives, Criteria, Methods, Evaluation of Alternatives, Findings and Analysis, and References). For Part 3 you will begin by inserting your revisions of Parts 1 and 2 based on your instructor’s suggestions. Then, you will include a few new sections.
Note:
Some sections presented below are out of order so pay attention to where the section should go (for instance, the Transmittal should be the second page of your report based on the provided template). It is essential that you present the final report in the correct section order.
Use the basic outline below to draft your paper. Organize your responses to each question under the following section headings:
·
Preliminary Parts (for Question 1)
·
Introduction (for Question 2)
·
o
Problem Statement (for Question 2b)
o
Terminology (for Question 2c)
o
Major Sections of the Report (for Question 2d)
o
Scope and Limitations of the Research (for Question 2e)
·
Recommendation (for Question 3)
·
References (for Question 4)
Using the provided template from Week 7, write Part 3 to complete a single-spaced report in which you:
6.
Create the preliminary parts of the report that precede the Introduction (after reading Chapter 11 in the textbook). Each element (1a to 1d) appears on a separate page (1a should be page 1, 1b should be page 2, etc.). The preliminary part includes:
.
Title Page
a.
Transmittal (stand-alone business letter)
b.
Table of Contents
c.
Executive Summary
7.
Create an introduction that tells what your report is about. The introduction includes:
.
Begin with a general introduction paragraph that gives the reader any needed background information on the company or problem.
a.
Include the Problem Statement that you already created and revised in Part 1.
b.
Include terms that readers will need to know in order to understand the report.
c.
Briefly summarize the major sections and findings of the report developed in Parts 1 and 2.
Note:
This is in addition to including the revised sections not instead of including the revised previous sections from Parts 1 and 2.
d.
Discuss what your report will cover and what it will not (including limitations such as research, time, information, or any other factors the reader should consider when reading the report).
8.
Create the Recommendation section of the Report.
.
Provide a one to two (1-2) sentence recommendation based on what your Evaluation of Alternatives and Findings and Analysis sections have .
Guidelines for Final Year Engineering & Technology Project.ppt
The document provides guidelines for final year engineering and technology projects. It outlines 12 program outcomes that engineering graduates should achieve, including applying knowledge to solve problems, designing solutions, modern tool usage, and lifelong learning. It also lists course objectives like developing technical skills and communication abilities. Project timelines are given for hardware and software based projects. Guidelines are provided for project reports, including formats, chapters, and appendices. Instructions are given to students and supervisors to ensure quality projects.
Detailed format for E-commerce project report |BBA
This document provides guidelines for preparing an e-commerce project report for a Bachelor of Business Administration program, including formatting guidelines for the paper, typing, layout, page numbering, binding, and arrangement of chapters. The report should follow a specific structure, beginning with an introduction, literature review, requirements analysis, software design, hardware/software specifications, content management system setup and configuration, finalizing the product, testing, further enhancements/recommendations, references, and appendices. Figures, photos, and tables should be numbered by chapter. The bibliography should be in alphabetical order by author or title. Samples of the front cover and certificate page are also provided.
Report format template sample from assignmentsupport.com essay writing services
Report format template sample from assignmentsupport.com essay writing services https://writeessayuk.com/
The document provides guidelines for submitting the final report for an EE 402 course, including:
- Reports must be submitted electronically in Microsoft Word or PDF/HTML format.
- The report should include sections on the problem, background, objectives, design approach, design documentation, test plan and results.
- The report must follow specific formatting guidelines for style, layout, headings, tables, figures, and references.
- Permission is required to use copyrighted materials from other sources.ECOM1000 – Project Part 2 Final Report ECOM1000 Analytic
ECOM1000 – Project Part 2: Final Report
ECOM1000: Analytics for Decision Making Page | 1
Faculty of Business and Law | School Accounting, Economics and Finance
CRICOS Provider Code 00301J
Curtin University, Semester 2, 2021
ECOM1000 Project
Part 2 (35%) – Final Report
The country representatives have accepted your proposal. Please go ahead with carrying
out the activities/tasks mentioned in the proposal (part 1). In addition to the activities
stated in part 1, the representatives would also like you to include the following items in
your report:
1. Explore the relationship across a pair of different aspects of the country over time.
For example, is there a relationship between the population and the environment
indicators over time? Can this relationship be quantified? Note, that your choice
of aspects could be influenced by the available data.
2. Construct a confidence interval for one of the aspects. Please state all
assumptions clearly and provide an interpretation of the interval.
3. Are there any legal or privacy issues with the data that is being used in the report?
Please provide some details/justification.
The three requests above must be incorporated into the methodology section i.e. update
the methodology section from part 1. As before, we are expected to apply the knowledge
from the unit modules to address these requests.
One of the main features of the final report is the results of the analysis. For this section
you are expected to produce a dashboard using the data for your country. The dashboard
is simply a collection of different types of graphs (similar to the ones in our tutorial/lab
work). The emphasis is presenting the data using different types of plots such as time
series plots, scatter plots, histograms, box plots and/or cumulative percentage charts.
Ensure that the plot type is matched well with the data that is being used. In addition to
this, results should also include numerical data summaries as well as the analysis
pertaining to the first two requests.
Lastly, it is very important that we provide brief commentary on all plots/results of the
analysis. The commentary is expected to be based on the content covered in the unit.
The final report should contain the following components:
Title page – update from part 1
Cover letter – update from part 1: This should now also include an updated
statement about what the report is about. It should explicitly state any changes (if
applicable) that you have made since the original proposal.
Tables of contents – update from part 1
Executive summary – A brief outline/summary of what the report contains. This
summary must be between 0.75 to 1 page maximum. This summary must NOT
contain any plots and/or tables. It is strongly advised that this section be written
at the end once all the other sections have been finalis ...
HS2031 Human Computer Interaction Assignment 2 Page 1 of 5 .docx
HS2031 Human Computer Interaction Assignment 2 Page 1 of 5
Assessment Details and Submission Guidelines
Trimester T2 2019
Unit Code HS2031
Unit Title Human Computer Interaction (HCI)
Assessment
Type
Group Assignment
Assessment
Title
HCI - Heuristic evaluation plan for a university learning management system
Purpose of the
assessment
(with ULO
Mapping)
Students will be able to:
c. Demonstrate skills in designing and evaluating interactive systems and web- based
applications
d. Apply knowledge of theoretical foundations of HCI to practical situations
Weight 20% of the total assessments
Total Marks 100% scaled to 20%
Word limit 2000-2500 words
Due Date Week 10
Submission
Guidelines
All work must be submitted on Blackboard by the due date along with a completed
Assignment Cover Page.
The assignment must be in MS Word format, 1.5 spacing, 11-pt Calibri (Body) font and 2 cm
margins on all four sides of your page with appropriate section headings.
Reference sources must be cited in the text of the report, and listed appropriately at the
end in a reference list using Harvard or IEEE referencing style.
HOLMES
INSTITUTE
FACULTY OF
HIGHER
EDUCATION
UNDERGRADUATE
PROGRAM
HS2031 Human Computer Interaction Assignment 2 Page 2 of 5
Assignment 2 Specification
The purpose of the report is to provide a heuristic evaluation plan for university learning management
system. In this group assignment (maximum 5 students) you are required to produce a non-functioning
prototype, usability analysis and heuristic evaluation plan for an organisation, in the format of a report
(2000-2500 words) documenting your design rationale.
All members must contribute equally to the assignment and the walkthrough. Non-attendance at the
walkthrough will mean a mark of ZERO is awarded to the group member.
Many Universities in Australia and the world are using learning management systems (LMS) such as
Blackboard and Moodel. As an HCI specialist team you have been requested to propose the user interface
design modifications for the LMS Blackboard of our university HOLMES institute.
1. Perform a user analysis. You must have a clear view of the users of this system. Consider that not
everyone is comfortable with the technology. For example, you need to deal with user variation
such as age or language skills.
2. Perform a task analysis to identify the tasks the potential users will perform, and in what order.
3. Consolidate your findings from your user and task analysis and propose a design and specify
system requirements to realise the recommended interface. For example, the number of items to
display, the screen size, what colours, how many different screens to display, the devices to you,
the physical design.
4. Develop a low-fidelity (paper) prototype (a minimum of 4 screens). Based on the above
requirements, develop a preliminary design of the user inter ...
CIS 210 – Assignments and RubricsAssignment 1 Inventory Manag.docx
CIS 210 – Assignments and Rubrics
Assignment 1: Inventory Management Systems
Your sister owns a small clothing store. During a conversation at a family dinner, she mentions her frustration with having to manually track and reorder high demand items. She would like an automated system but has a very small budget.
Write a 4-5 page paper in which you create a plan for a low-cost automated inventory system in which you:
Describe all the necessary equipment.
Explain the costs involved in the creation of the system.
Describe the ongoing maintenance that will be required.
Provide a workflow diagram in Visio or equivalent software to illustrate how the system will work.
Your assignment must follow these formatting requirements:
Be typed, double-spaced, using Times New Roman font (size 12), with one-inch margins on all sides; citations and references must follow APA or school-specific format. Check with your professor for any additional instructions.
Include a cover page containing the title of the assignment, the student’s name, the professor’s name, the course title, and the date. The cover page and the reference page are not included in the required assignment page length.
Include charts or diagrams created in Excel, Visio, MS Project, or one of their equivalents such as Open Project, Dia, and OpenOffice. The completed diagrams/charts must be imported into the Word document before the paper is submitted.
The specific Course Learning Outcomes associated with this assignment are:
Describe the types of business needs that can be addressed using information technology-based solutions.
Create requirements for a system through a formal technique that enables a productive change in a way the business is conducted.
Use contemporary CASE tools in process and data modeling.
Use technology and information resources to research issues in systems analysis and development.
Write clearly and concisely about Systems Analysis and Development topics using proper writing mechanics and technical style conventions.
Grading for this assignment will be based on answer quality, logic / organization of the paper, and language and writing skills, using the following rubric.
Points: 100
Assignment 1: Inventory Management Systems
Criteria
Unacceptable
Below 60% F
Meets Minimum Expectations
60-69% D
Fair
70-79% C
Proficient
80-89% B
Exemplary
90-100% A
1. Describe all the necessary equipment.
Weight: 10%
Did not submit or incompletely described all the necessary equipment.
Insufficiently described all the necessary equipment.
Partially described all the necessary equipment.
Satisfactorily described all the necessary equipment.
Thoroughly described all the necessary equipment.
2. Explain the costs involved in the creation of the system.
Weight: 20%
Did not submit or incompletely explained the costs involved in the creation of the system.
Insufficiently explained the costs involved in the creation of the system.
Partially explained the costs involved in the creat ...
Management Information System Practice Orientations abou.docx
Management Information System Practice
Orientations about the Final Project
Introduction
The present project is a practice exercise where students will apply the concepts studied
in class analyzing an organization or firm, in this case the organization will be the firm
where each student works or Polytechnic University (Orlando-Miami Campuses) if the
student does not work.
Objective
Propose a new system or improve and existent system of an organization applying the
knowledge learned in the different courses of Business Administration Program.
Reference
C. V. Brown, D. W. DeHayes et al. Managing Information Technology, Seventh Edition,
Pearson Prentice Hall, 2012.
Students are encouraged to add their own reading list as appropriate.
Development
The development of the project requires the following analysis:
1. Current structure and behavioral view of the organization.
2. The structural characteristics cover a clear dividing of labor (managers and staff),
hierarchy, explicit rules and procedures, impartial judgments, technical
qualifications for positions, and maximum organizational efficiency.
3. Classify what type of organizational structure is It, and it differences respect other
types of organizations similar to. Unique characteristics of this organization
respect to other high educational center such as organizational type,
environments, goals, power, constituencies, function, leadership, tasks,
technology, and business process. It principal strengths and weakness.
4. Current information technology and current information systems. How these
resources are used (or not).
5. Experiences of other competitors which use information systems. How these ISs
could affect the organization.
6. Analysis of Information systems more implemented in this type of organizations
and which the team will recommend and why?
7. Develop a proposal redesigned the organization with information systems. The
role of a network and Internet in this proposal.
8. Information systems security and control.
9. Assessing the cost of the proposal.
10. Writing of the final project in MS Word. Parts of report: (Title, author and
professor, Index, Introduction, Goals, Development, Conclusion and
Recommendations, and References, Some diagrams and pictures could be
included. These must have numbers and titles.
11. PowerPoint presentation.
Deadline
The project will have six phases or cuts, which end with a report.
First phase (09/23/2013 - 09/29/2013): In this phase, the student must specify what will
be the organization or firm selected. It could be the organization where each student
works or any other selected by him. You can select a division, a department, a section of
a production process, etc.
Note: It is a six-week course, so you should analyze, design, complete, and write the final
report and PowerPoint presentation in six weeks in order to obtain the c ...
Group project bs1
1. The document provides details for a group project assignment on building services systems for a Quantity Surveying course.
2. Students will be assigned to groups of up to 6 people and tasked with preparing a report on one of 10 topics related to sustainable building services.
3. The 3500-word report must include documentation of the selected system, an explanation of the installation process, benefits and problems, at least one case study, and recommendations for future improvements. Reports will be assessed based on demonstrated understanding, quality of documentation, and clear communication.
Group project bs1
1. The document provides details for a group project assignment on building services systems for a Quantity Surveying course.
2. Students will be assigned to groups of up to 6 people and each group will analyze one of 10 topics related to sustainable building services.
3. The final deliverables are an A4 bound report of at least 3500 words analyzing the assigned topic, including visuals, installation processes, advantages/disadvantages, a case study, and recommendations. Groups will also do a 7-10 minute presentation on their topic.
Writing Issc Cpaper J Vd S Nov06b
The document provides tips for writing a paper that will be accepted by the International Solid-State Circuits Conference (ISSCC). It emphasizes demonstrating innovation that advances the state-of-the-art, including quantitative results, comparisons to previous work, and highlighting what is technically novel. It warns against submissions without new hardware results or simulations without silicon implementation and testing. The review process is rigorous, with expert reviewers ensuring papers meet high technical standards.
This document is for Coventry University students for their ow.docx
This document is for Coventry University students for their own use in completing their
assessed work for this module and should not be passed to third parties or posted on any
website. Any infringements of this rule should be reported to
[email protected]
Faculty of Engineering, Environment and Computing
M09CDE Computer Architectures and
Principles
Assignment Brief 2018/19
Module Title: Computer Architectures
and Principles
Individual Cohort (January) Module Code
M09CDE
Coursework Title
Resit Coursework
Hand out date:
21/01/2019
Lecturer
Dr Dianabasi Nkantah
Due date: 6pm 29th April
2019
Estimated Time (hrs): 30 hours
Word Limit*: 3500
Coursework type: Assignment % of Module Mark
50%
Submission arrangement online via CUMoodle: Submission link on CUMoodle
File types and method of recording: ‘.pdf’, ‘.docx’, ‘.doc’
Mark and Feedback date: 13th Mar 2019
Mark and Feedback method: Feedback file on CUMoodle
Module Learning Outcomes Assessed:
2. Evaluate alternative systems software and machine performance features in order to select
appropriate tools and deploy suitable hardware elements for a given set of technical and
operational requirements.
3. Discuss the benefits of a range of system architectures and communications infrastructure
elements for a range of applications and user requirements bearing in mind the competing
constraints of performance, cost, security and usability.
4. Identify the merits of a range of specialised architectures in providing performance and other
critical requirements for particular application areas or environments, measuring their
effectiveness in achieving these goals.
Task and Mark distribution:
SECTION A
You are required to choose two currently used microprocessors (from two different manufacturers).
Processor manufacturers include Intel, AMD, ARM, Motorola, Fujitsu, VIA Technologies, etc. Each of the
two processors chosen should be suitable for use in a different class of computers (e.g. PCs/Laptops,
Servers, and embedded systems) from the second processor. Conduct research with the aim of analysing,
as well as comparing and contrasting the design of these processors. A report of this analysis and
comparison/contrast, with recommendations, should be compiled and submitted. You are expected to
conduct research external to lectures (e.g. finding evidence to support your claims from manufacturer
websites, journal/conference articles, etc.).
Research should focus on performance, cost and energy consumption of these microprocessors.
Aspects of design to consider should include, but not limited to, instruction set architecture, internal
structure, interconnection architecture, cache organisation, error correction, memory management and
parallel processing. Your report should also provide an indication of the current trend in processor design.
This document is for Coventry University students for their own use in completing the.
Submit the proposal for a final project. This proposal should be a.docx
Submit the proposal for a final project. This proposal should be at least one paragraph.
Objectives
• Turn in Midterm/Interim Group Work
Assignments
Your Midterm/Interim report for your group project must include the following components in your paper:
1. Clear Definition of the Project Background
2. Clear Definition of the Project Objective
3. RFP
4. Detailed Proposal including Technical, Management, and Cost Sections.
5. Completed Evaluation Form for the Proposal
6. Written Contract including any Provisions
7. Discussion of Project Constraints
I will use the following rubric:
Category
Item
Points
Content/Application of Project Management Principles
(90% Max Pts)
The project has a clear background and the needs are accurately identified. RFP solicitation documentation is present, along with detailed cost selection criteria.
The practice, technology, or solution used is appropriate and applicable to solving the business requirement as stated in the fact pattern.
Essential contract provisions and constraints are spelled out.
The report should be a minimum of 10 pages of doubled spaced content, not including any front matter, references, or graphs.
Mechanics, grammar and Formatting.
(10% Max Pts)
No errors in grammar or spelling. Each paragraph develops a central concept and transitions logically. Use of APA formatting is required.
.
Similar to Assignment guides (15)
i just need these revisedWeek 7 Assignment 2.3 - Submit He.docx
i just need these revisedWeek 7 Assignment 2.3 - Submit He.docx
Guidelines for Final Year Engineering & Technology Project.ppt
Guidelines for Final Year Engineering & Technology Project.ppt
Detailed format for E-commerce project report |BBA
Detailed format for E-commerce project report |BBA
Report format template sample from assignmentsupport.com essay writing services
Report format template sample from assignmentsupport.com essay writing services
ECOM1000 – Project Part 2 Final Report ECOM1000 Analytic
ECOM1000 – Project Part 2 Final Report ECOM1000 Analytic
HS2031 Human Computer Interaction Assignment 2 Page 1 of 5 .docx
HS2031 Human Computer Interaction Assignment 2 Page 1 of 5 .docx
CIS 210 – Assignments and RubricsAssignment 1 Inventory Manag.docx
CIS 210 – Assignments and RubricsAssignment 1 Inventory Manag.docx
Management Information System Practice Orientations abou.docx
Management Information System Practice Orientations abou.docx
This document is for Coventry University students for their ow.docx
This document is for Coventry University students for their ow.docx
Submit the proposal for a final project. This proposal should be a.docx
Submit the proposal for a final project. This proposal should be a.docx
More from Kamal Abdurahman
Liquid permeability
This document describes an experiment to determine the liquid permeability of a core sample using a liquid permeability device. The experiment involves applying confining pressure from a nitrogen gas supply, using another nitrogen gas supply to push water through the core sample, and measuring the flow rate and time taken to fill a graduated flask to calculate permeability based on Darcy's law. Safety warnings and references are also provided.
Helum porosty meter
This experiment aims to determine porosity using a helium porosimeter. The student, Kamal Abdurahman, will conduct the experiment supervised by Mr. Ali Kamal. The helium porosimeter works by measuring the volume of helium gas that expands into sample pores based on Boyle's and Charles' laws. This allows direct measurement of grain volume and pore volume, from which porosity and grain density can be derived. The apparatus includes a helium porosimeter, pressure gauge, and various sample holders to accommodate different sized rock plugs and cores.
Porosity by saturation method
This experiment aims to determine the porosity of a core sample using the saturation method. The procedure involves saturating a dry core sample with brine under vacuum and pressure, then measuring the saturated and dry weights to calculate pore volume and porosity. Effective porosity is measured, representing the interconnected pores that contain movable fluids like brine. Core plugs are analyzed to determine physical rock properties like porosity and permeability important for calculating oil and gas in place volumes. The result of porosity value for the sample will be reported to the nearest 0.1%.
Core cleaning
This experiment aims to clean a core sample using the Soxhlet extraction method to remove any oil or water and preserve the original properties of the reservoir rock. The core sample is placed in a thimble and submerged in toluene solvent inside a Soxhlet apparatus. Toluene is slowly boiled and condenses, flowing over the core sample and removing any contaminants through multiple cycles. After drying, the core sample weight is measured before and after to calculate fluid saturations and determine if the cleaning was successful in purifying the core.
Core plugging test
This document describes an experiment to prepare core plugs from rock core samples. The objectives are to determine physical properties of the rock like porosity and permeability. The procedure involves slabbing the core, drilling plugs from the core using a core plugging machine, and analyzing the plugs through routine and special core analysis. Routine analysis provides properties for reservoir evaluation while special analysis gives information on multiphase flow and wettability. The results of core analysis are used to improve hydrocarbon recovery and production predictions.
Multi desaturator cell
This document describes an experiment to determine the capillary pressure-saturation curves for a core sample using a multi-desaturator cell apparatus. The apparatus applies varying pressures to the core sample to remove water from the pores and measure the resulting saturation levels. The procedure involves saturating core samples with brine, placing them in the cell on a ceramic plate, increasing the air pressure to remove water, then measuring water production and plotting capillary pressure versus saturation. The goal is to understand how capillary pressure affects water saturation in porous rock cores at different pressures.
Carbon residue report
Carbon residue is a test performed on lubricating oils and fuels to determine their potential to form carbon deposits. The test involves heating an oil sample in a small tube and measuring the carbon residue left behind. A higher carbon residue number indicates the oil or fuel is more likely to leave deposits that can clog engines or damage components over time.
PH meter report
This document discusses measuring the pH of drilling mud using a pH meter. It begins with an introduction of the aim, which is to measure the pH of drilling mud to understand its acidity and alkalinity. It then discusses the theory behind pH and how hydrogen ion concentration relates to acidity and alkalinity. The apparatus used is a pH meter, which is calibrated using standard water. Samples are then tested and the pH is measured and recorded. The discussion covers how pH is important for drilling operations and can impact equipment, as well as methods for measuring pH.
Mud Filtration Test
This document discusses mud filtration experiments. It aims to monitor the rate of fluid loss from a filter press under controlled conditions and measure the thickness of residue deposited on the filter paper. Filtration properties are important for understanding invasion into porous formations and filter cake buildup on wellbores. The experiment uses a standard filter press to test mud samples under static and dynamic filtration conditions at varying temperatures and pressures. Results like fluid loss volume and filter cake thickness indicate how much water/oil wetting and permeability damage may occur in formations. Formation damage can reduce productivity and is affected by factors like filter cake properties, filtrate invasion, and drilling/completion operations.
Capillary suction-timers
This document describes an experiment to evaluate the capillary suction time (CST) test for measuring sludge dewaterability. The objectives were to evaluate alternative test apparatus designs and procedures to improve precision and reduce costs. The CST test measures the time for filtrate to travel between electrodes using a filter paper under suction. Variables tested included funnel geometry, filter paper type, stirring, temperature, and sludge concentration. The results could help recommend improved CST test methods and better understand relationships between CST and other sludge dewaterability tests.
Steady state gas permeameter
This document discusses using a steady state gas permeameter to measure the permeability of samples such as oil well cores and tight gas sandstones. The steady state gas permeameter measures the drop in pressure and flow rate through a sample during testing. Software then uses Darcy's Law to compute the permeability. The apparatus includes a steady state gas permeameter. References are provided on steady state permeability measurement and properties of rocks at high temperatures and pressures.
Poster about oil field distribution in kurdistan
Poster about all oil fields in Kurdistan and their Locations.
GIS and Remote Sensing
This document summarizes a report on using GIS and remote sensing for natural resource mapping and management. It was prepared by Kamal Abdurahman for his supervisor at Koya University. The report describes using satellite imagery to map geology, vegetation, soils, and land use/land cover in a region of the Middle East. Imagery was analyzed using GIS software to extract spatial information on natural resources for sustainable management and decision making. Field verification involved collecting GPS points to validate mapped resources. Final maps of the study area's geology, soils, vegetation and land use were produced at a scale of 1:25,000.
Open Hole Completion Design
1. Open-hole completions, also called 'barefoot' completions, involve setting casing above the productive interval and drilling into and through the reservoir, leaving it uncased and exposed to the wellbore.
2. For a simple open-hole well completion, the process involves setting production casing above the zone of interest before drilling into it, leaving it open to the wellbore, and then installing wellhead equipment to control flow.
3. Key steps include drilling into the formation, installing wellhead valves and pipes to direct and burn off initial flow, and cleaning the well until the flow stabilizes before testing and starting production.
Galvanic corrosion
This document provides an overview of galvanic corrosion. It defines corrosion and galvanic corrosion specifically. Galvanic corrosion occurs when two dissimilar metals are in contact, where the more active metal corrodes at an accelerated rate while the noble metal corrodes at a reduced rate. The document highlights how the difference in corrosion potentials between the metals determines the severity of galvanic corrosion. It also notes some methods to prevent galvanic corrosion, such as using galvanic coatings and controlling the surface area ratio between the metals. Videos are included to demonstrate galvanic corrosion procedures and examples.
Rig types.
The document discusses different types of drilling rigs and factors for selecting a rig. It outlines various land and offshore rigs, including conventional land rigs, mobile land rigs, inland barge rigs, posted barge rigs, submersible rigs, fixed jacket rigs, and drill ships. Key factors for selecting a rig include the surface location, maximum hole depth, horsepower requirements, cost, and availability. Offshore rigs like submersible rigs can work in water depths from 18 to 70 feet, while drill ships are used for the deepest water depths of over 2500 meters.
Structural Geology for petroleum Egineering Geology
Structural geology is the study of geological structures like faults, folds, and joints. It provides important information for fields like engineering geology, economic geology, and plate tectonics. Folds form when rock layers bend under pressure and heat. The limbs of folds dip inward or outward forming anticlines and synclines. Faults form when rocks break under stress, producing displacement along a fracture. The hanging wall moves relative to the footwall. Joints are fractures without displacement that form to relieve stress. Unconformities represent gaps in the geological record due to erosion. They provide evidence about past environmental conditions. Structural features must be considered for engineering projects due to their effects on rock strength and fluid flow. Plate t
More from Kamal Abdurahman (18)
Structural Geology for petroleum Egineering Geology
Structural Geology for petroleum Egineering Geology
Recently uploaded
The Diamonds of 2023-2024 in the IGRA collection
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...Nguyen Thanh Tu Collection
https://app.box.com/s/tacvl9ekroe9hqupdnjruiypvm9rdaneBeyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Iván Bornacelly, Policy Analyst at the OECD Centre for Skills, OECD, presents at the webinar 'Tackling job market gaps with a skills-first approach' on 12 June 2024
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Main Java[All of the Base Concepts}.docx
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
Reimagining Your Library Space: How to Increase the Vibes in Your Library No ...
Librarians are leading the way in creating future-ready citizens – now we need to update our spaces to match. In this session, attendees will get inspiration for transforming their library spaces. You’ll learn how to survey students and patrons, create a focus group, and use design thinking to brainstorm ideas for your space. We’ll discuss budget friendly ways to change your space as well as how to find funding. No matter where you’re at, you’ll find ideas for reimagining your space in this session.
Leveraging Generative AI to Drive Nonprofit Innovation
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.Hindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
How to Manage Your Lost Opportunities in Odoo 17 CRM
Odoo 17 CRM allows us to track why we lose sales opportunities with "Lost Reasons." This helps analyze our sales process and identify areas for improvement. Here's how to configure lost reasons in Odoo 17 CRM
clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
Recently uploaded (20)
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Reimagining Your Library Space: How to Increase the Vibes in Your Library No ...
Reimagining Your Library Space: How to Increase the Vibes in Your Library No ...
Leveraging Generative AI to Drive Nonprofit Innovation
Leveraging Generative AI to Drive Nonprofit Innovation
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
How to Manage Your Lost Opportunities in Odoo 17 CRM
How to Manage Your Lost Opportunities in Odoo 17 CRM
Assignment guides
- 1. BSc Petroleum Engineering Drilling Engineering II 4th stage Drilling engineering operation consist six systems, which are related to each other, one messing system the drill operation will be stopped or suspend until the system will back again Each of the systems are significant in the life of well drilling and design or selection of each parts will be related to the final Safety, Quality and Efficiency of drilling operation. Submit a 1500 word report discussing the above statements. In your report you may include or refer to points such as: System definition System includes The design and operation guide The output of the systems NOTE The assignment must provide information on the selected system for each divided groups The final work contributes 1 point of the lecture towards the total mark of drilling engineering II over 40%. The Report must not be more than 7 pages of A4; this is not including table of content; diagrams and references. The report must also be typed and bound on one side, font ; Times New Roman, size 12 body writing 14 heading, line spacing 1.5. The structure of the report must include: contents page; list of tables; list of figures; main body work; conclusion and references. Submitted by email (Sarhad.ahmed@koyauniversity.org) by 16th December 2015. Late submission after this date will only achieve a pass mark. If submitted within 7 days of the original submission date. The mark will be divided as follows; Planning Achievement Attitude and understanding Quality of Presentation References (ref-work standards) Although you can discuss your work with others; the final presented work must be your own work. Any infringement of the university plagiarism regulations will be dealt with in accordance with the university plagiarism procedures.
- 2. Added Header ( not for title page) Added footer Paged number (Faculty name) (Department name) (Course name) (Stage) Title In italic and bold Prepared by: Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Supervised by: Mr, XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Student Email:xxxxxxx@gmail.com Year (XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX