Army Presentation
•Download as PPT, PDF•
0 likes•388 views
The document describes a single machine that can shred and sterilize different types of waste through a process of stabilization and volume/weight reduction with no liquid release or infection risks. The machine contains components like a sterilization chamber, rotor, and valves. The process raises the temperature over time to either pasteurize or fully sterilize the waste. Benefits include an automatic and safe cycle with a dry, odorless final product of reduced volume and weight. Applications include use in military hospitals, ships, and mobile emergency situations.
Report
Share
Report
Share
Recommended
Cleanster machines catalogue Cleaning Machine Manufacturer India
We are offer Industrial Bin OR Crate Cleaning Machine with advanced filtration and oil remove coalsing system for increasing component efficiency, work performance and working life which reduces cost.
Science fair
This document provides instructions for creating elephant toothpaste. It lists the ingredients needed which include 30% hydrogen peroxide, sodium iodide or potassium iodide solution, liquid soap, and food coloring. The instructions describe measuring out 20mL of hydrogen peroxide into a graduated cylinder, adding a squirt of dish soap and some food coloring, then adding 5mL of the sodium iodide solution which causes a quick reaction and produces toothpaste-like foam.
Horizontal Autoclave (Cylindrical) by ACMAS Technologies Pvt Ltd.
We are manufacturers of horizontal autoclave, triple walled horizontal autoclave India since 1990. Our horizontal autoclaves are widely used for day to day mass scale sterilization procedures and in various bulk laboratory applications . For more information please log on http://cutt.us/SZ7Mr
Washing machine
The document provides an overview of washing machines, including their history, components, processes, and tips. It discusses how washing machines have evolved from manual washing on rocks to modern machines with microchips and smartphone controls. The key components of a washing machine are described, such as the inner and outer tubs, plumbing, drive mechanism, and pump. The washing process involves filling, agitating, draining, rinsing, and spinning cycles. Tips are provided on pre-treating stains, choosing the right water temperature, and avoiding detergent residue. Common problems like not spinning or draining and solutions are also summarized.
Wp p1701-a101 e (en)
This document provides information about a built-in under-sink water purifier model A101E made in Japan. It uses a 4-layer filtration system including a non-woven fabric, hollow fiber membrane, ion exchange fibers, and activated carbon to remove sediments, soluble lead, toxic impurities, and other contaminants while keeping minerals intact. Testing shows it can remove 13 substances and produces water meeting Vietnamese drinking water standards. Compared to bottled water, the purifier saves 53-81% annually in water costs using just one replacement cartridge per year that filters 8,000 liters of water.
dettol hand wash price 250ml
hand sanitize is the following best thing influenza and corona virus avoidance. Be DAT as it may, what do you do when the stores are completely
Autoclave the hit sterilisation
The document discusses the history and working of autoclaves. Autoclaves were invented in 1879 by Charles Chamberland to sterilize equipment using pressurized steam above the boiling point of water. Autoclaves work by increasing the pressure inside a sealed chamber, raising the temperature above 100°C to sterilize materials through wet heat. They have various applications in microbiology, medicine, dentistry and laboratories. Safety, cost, and ability to sterilize different materials pose limitations to their use.
Microlit Ultimus | Indian Institute of Toxicology Research
The document describes Microlit Ultimus, a bottle top dispenser that offers four modes of dispensing through its patented Dual Inlet technology. It can perform rinsing, dilution, and dual liquid handling without needing to remount the dispenser due to its ability to connect to two separate liquid sources. This is more efficient than ordinary dispensers that require remounting for different tasks. The dispenser is suitable for industries like pharmaceuticals and life sciences due to its precision and chemical compatibility. It has received praise from scientists at CSIR-IITR for safely dispensing acids and improving analysis results.
Recommended
Cleanster machines catalogue Cleaning Machine Manufacturer India
We are offer Industrial Bin OR Crate Cleaning Machine with advanced filtration and oil remove coalsing system for increasing component efficiency, work performance and working life which reduces cost.
Science fair
This document provides instructions for creating elephant toothpaste. It lists the ingredients needed which include 30% hydrogen peroxide, sodium iodide or potassium iodide solution, liquid soap, and food coloring. The instructions describe measuring out 20mL of hydrogen peroxide into a graduated cylinder, adding a squirt of dish soap and some food coloring, then adding 5mL of the sodium iodide solution which causes a quick reaction and produces toothpaste-like foam.
Horizontal Autoclave (Cylindrical) by ACMAS Technologies Pvt Ltd.
We are manufacturers of horizontal autoclave, triple walled horizontal autoclave India since 1990. Our horizontal autoclaves are widely used for day to day mass scale sterilization procedures and in various bulk laboratory applications . For more information please log on http://cutt.us/SZ7Mr
Washing machine
The document provides an overview of washing machines, including their history, components, processes, and tips. It discusses how washing machines have evolved from manual washing on rocks to modern machines with microchips and smartphone controls. The key components of a washing machine are described, such as the inner and outer tubs, plumbing, drive mechanism, and pump. The washing process involves filling, agitating, draining, rinsing, and spinning cycles. Tips are provided on pre-treating stains, choosing the right water temperature, and avoiding detergent residue. Common problems like not spinning or draining and solutions are also summarized.
Wp p1701-a101 e (en)
This document provides information about a built-in under-sink water purifier model A101E made in Japan. It uses a 4-layer filtration system including a non-woven fabric, hollow fiber membrane, ion exchange fibers, and activated carbon to remove sediments, soluble lead, toxic impurities, and other contaminants while keeping minerals intact. Testing shows it can remove 13 substances and produces water meeting Vietnamese drinking water standards. Compared to bottled water, the purifier saves 53-81% annually in water costs using just one replacement cartridge per year that filters 8,000 liters of water.
dettol hand wash price 250ml
hand sanitize is the following best thing influenza and corona virus avoidance. Be DAT as it may, what do you do when the stores are completely
Autoclave the hit sterilisation
The document discusses the history and working of autoclaves. Autoclaves were invented in 1879 by Charles Chamberland to sterilize equipment using pressurized steam above the boiling point of water. Autoclaves work by increasing the pressure inside a sealed chamber, raising the temperature above 100°C to sterilize materials through wet heat. They have various applications in microbiology, medicine, dentistry and laboratories. Safety, cost, and ability to sterilize different materials pose limitations to their use.
Microlit Ultimus | Indian Institute of Toxicology Research
The document describes Microlit Ultimus, a bottle top dispenser that offers four modes of dispensing through its patented Dual Inlet technology. It can perform rinsing, dilution, and dual liquid handling without needing to remount the dispenser due to its ability to connect to two separate liquid sources. This is more efficient than ordinary dispensers that require remounting for different tasks. The dispenser is suitable for industries like pharmaceuticals and life sciences due to its precision and chemical compatibility. It has received praise from scientists at CSIR-IITR for safely dispensing acids and improving analysis results.
Army final ppt
The document discusses the performance appraisal system in the Pakistan Army and how it is linked to compensation. It provides background on the history and structure of the Pakistan Army. The performance appraisal process involves annual confidential reports for both officers and other ranks. Officers are evaluated on criteria like ability, leadership, and professional competence by multiple reporting officers. Techniques used include graphic rating scales, pen pictures, and behavioral anchored rating scales. While the performance evaluation does not directly impact base pay, it is indirectly linked to compensation and promotion recommendations. Politics and human factors can sometimes introduce errors into the appraisal process.
US President Air force one ppt
This is the ppt of US President's Air Force One on which he travel across the world and I am glad to present the ppt on this..
True pinoy
This document highlights characteristics of successful Filipino entrepreneurs. It profiles Henry Sy of SM Prime Holdings, Tony Caktiong of Jollibee, and Lucio Tan of Tanduay Holdings as pioneering Pinoy entrepreneurs in business. It also discusses successful Filipinos in other fields like fashion (Dr. Vicky Belo), entertainment (Nino Muhlach), sports, government (Manny Villar), and others (Socorro Ramos of National Bookstore). The document encourages Filipinos to ignite their potential and work hard, as these entrepreneurs did, to achieve success.
PHILIPPINE CONTEMPORARY POPULAR MUSIC-PINOY ROCK
Report on Pinoy Folk and Rock Music presented by my students Josh Villanueva, John Aguado and Marianne Dasal for my Philippine Contemporary Popular Music class in DLS-College of St. Benilde.
Pakistan - Armed Forces
The Pakistani military was formed after independence in 1947 and drew experienced officers from those who served under British rule. It has fought three wars against India and engaged in border skirmishes with Afghanistan and India. The military currently has over 921,000 active and reserve personnel across the army, navy, air force and paramilitary forces. It has participated in UN peacekeeping missions and provides disaster relief domestically and abroad.
Pakistan armed forces
Pakistan Armed Forces
Headquarters
Leadership
Chairman, Joint Chiefs of Staff Committee
General Khalid Shameem Wynne
Secretary of Defence
Nargis Sethi
Chief of Army Staff
Chief of Air Staff
Chief of Navy Staff
General Ashfaq Parvez Kayani
Air Chief Marshal Tahir Rafik Butt
Muhammad Asif Sandila
Manpower
Military age 16–49 years old[1]
Available for
military service 48,453,305 males, age 16–49 (2010 est.),
44,898,096 females, age 16–49 (2010 est.)
Fit for
military service 37,945,440 males, age 16–49 (2010 est.),
37,381,549 females, age 16–49 (2010 est.)
Expenditures
Budget $6.41 billion (2010–11) (ranked 35th)
Percent of GDP 2.6% (2008)
Foreign suppliers China
United States
France
Italy
Germany
Sweden
Turkey
Pakistan Armed Forces
The Pakistan Armed Forces, Musalah Afwaj-e-Pakistan) are the military forces of Pakistan. They are the seventh largest in the world in terms of active troops. The armed forces comprise three main branches:
the Pakistan Army, the Pakistan Navy (including the Pakistan Marines) and the Pakistan Air Force, together with a number of paramilitary forces.
Following 1962, Pakistan Armed Forces has had close military relations with the People's Republic of China, including development and research cooperation to enhance military system, such as on the JF-17 Thunder, K-8 Karakorum, and others as well. China is the leading supplier of military equipments to Pakistan.
The armed forces were formed in 1947 when Pakistan became independent from the British Empire.
Pakistan Armed Forces are the largest contributors to United Nations peacekeeping efforts, with more than 10,000 personnel deployed in 2007. Other foreign deployments have consisted of Pakistani military personnel as advisers in African and Arab countries.
History
Before 1947, most military officers of the newly formed Pakistan Armed Forces had served in the British Indian Army and fought in both World Wars and the numerous Anglo-Afghan Wars. Several experienced commanders who fought in the British military in World War II joined Pakistan Armed Forces giving it professionalism, experience and leadership. After independence, the military was supposed to have been divided between India and Pakistan with a ratio of 64% going to India and 36% for Pakistan; however, it is estimated that India refused to divide its share of equipment and some analyst suggest that Pakistan inherited a mere 15% of its allocated share.
The Pakistan Armed Forces have also taken over the Pakistani government several times since independence mainly on the pretext of lack of good civilian leadership, whom most Pakistanis regard as corrupt and inefficient. However, according to the political parties removed from power by the army, political instability, lawlessness and corruption are direct consequences of army rule.
TROOP STRENGTH
Pakistan’ Military is the seventh largest in th
7 lessons on Presentation Design from TED TALKS | Curly Films
TED TALKS was created in 1984 with a big mission in mind: to gather the most interesting people in the world, sharing their passion in about 18 minutes. TED stands today as the benchmark for the best presentations. Why? Because the best presentations entail a well-thought storytelling structure that easily sings to the audience. Curly Films - Storytelling Office shares 7 tips you can use in your own business presentations.
Sterile dosage form
This document discusses the production of sterile dosage forms. It covers topics such as types of sterile dosage forms including parenteral, ophthalmic, and pyrogen-free forms. It also discusses water for injection, types including water for injection, sterile water for injection, and bacteriostatic water for injection. Methods of sterilization are outlined like steam sterilization, dry heat, filtration, and radiation. Other areas covered include air classification systems, HEPA filters, and production line flow charts.
Menikini industry presentation
This document discusses the benefits of using saturated dry steam for industrial sanitizing over traditional cleaning methods. Dry steam requires only three stages - physical removal of dirt, cleaning with steam or steam/water/detergent, and drying. This is more efficient than the traditional six stage process. Dry steam is effective at killing pathogens due to thermal shock. It is also suitable for complex surfaces, does not damage delicate surfaces, saves water, and is environmentally friendly as it reduces detergent, water, and chemical waste. Studies show dry steam reduces bacterial contamination on surfaces to levels required by EU regulations. The document promotes dry steam cleaning for food, beverage, hospitality, and other industries.
Plaq_Dipho_EN_2014_HD
This document provides information on chemical burns and the use of DIPHOTERINE® solution for emergency treatment. It discusses:
- How chemicals like corrosives and irritants can burn the skin by destroying cells through chemical reactions.
- The limitations of using water alone for washing, as it can further damage tissues.
- How DIPHOTERINE® solution works as an effective washing agent by stopping the chemical reactions and preserving cells from further damage, through its amphoteric chelating properties.
- Clinical evidence and studies showing DIPHOTERINE® solution's effectiveness in treating chemical burns, even with delayed washing times, and preserving vision in serious eye burns.
Menikini katalog
The document discusses the benefits of industrial sanitizing using ecological dry steam. It can sanitize surfaces with only three stages compared to six for traditional methods. Dry steam is more environmentally friendly as it uses less water and chemicals. Studies show dry steam is highly effective at reducing bacterial and fungal contamination on surfaces. The document lists various industrial and commercial applications where dry steam cleaning provides economical, social, and environmental benefits over traditional cleaning methods.
Facility requirements for Hazardous drug Manufacturing
The document provides guidance for ensuring safety throughout the manufacturing process of hormonal drugs. It emphasizes the importance of personnel safety, environmental safety, and patient safety by following current good manufacturing practice guidelines. This includes minimizing risks of contamination and cross-contamination. The document then lists numerous regulatory and industry standards that should be referred to for sterile drug production.
BOWE_Factbook_EN
This document provides information about Böwe Textile Cleaning GmbH, a German manufacturer of dry cleaning machines. It summarizes the company's history, starting in 1945, and its development of innovative dry cleaning machines. It highlights key aspects of Böwe's premium line of machines, including their quality construction with round components, efficient drying systems, safety features, and multi-stage distillation process. The document also lists some of Böwe's satisfied customers around the world and installations of its machines.
Autoclave
The document discusses sterilization and autoclaves. It defines sterilization as removing microorganisms through processes like heat, chemicals, irradiation, or filtration. An autoclave is then described as a pressurized device that uses high temperature steam to achieve sterilization above water's boiling point. The document outlines the basic components, construction, and operating principles of autoclaves, including how increased pressure allows for higher sterilization temperatures. It also discusses autoclave usage, types, limitations, maintenance procedures, and quality control measures like indicators.
Autoclave
The autoclave is a device used to sterilize equipment and supplies using high pressure steam. It works by sealing items inside a chamber and raising the temperature above 100°C using pressurized steam, which is able to kill microorganisms like bacteria and viruses. Autoclaves have been used in healthcare settings since the late 19th century to safely sterilize surgical and dental tools. Modern autoclaves still function on these same principles, using precise temperature, pressure, and timing to eliminate all forms of microbial life that could cause infection. They must be properly maintained and cleaned regularly to ensure effective and safe sterilization.
Private dental practice after covid 19 pandemic outbreak
The document provides guidelines for private dental practices after the COVID-19 pandemic, including screening patients, using personal protective equipment like masks and gloves, maintaining infection control practices through measures like social distancing and disinfecting surfaces, and categorizing treatment based on patients' COVID-19 status. It also outlines recommendations for procedures, clinic maintenance, and managing costs associated with increased safety precautions. The guidelines are meant to help dental practices safely resume operations while preventing the spread of coronavirus.
Autoclave Steam Sterilizer - Pharmaceutical
Autoclave Steam Sterilizer is used in Microbiology, QC & Research laboratory in the Pharma industry for sterilization by steam. This laboratory sterilizer helps to demonstrate the temperature distribution in the loaded chamber is acceptable and that the items within the chamber receive a uniform heat treatment.
MMW - Product Portfolio
This document provides information on a company's portfolio of water purification products. It lists various models of water purification systems with their specifications, including reverse osmosis (RO) units, ultrafiltration units, and desalination units. The systems are intended for uses such as providing clean drinking water in humanitarian crises, expeditions, and for public buildings. Pictures and descriptions of some example models are provided, along with optional extras and specifications.
BMW Management
The document outlines guidelines for managing biomedical waste in hospitals. It discusses categorizing waste based on infectivity, proper segregation, collection, storage, and disposal methods. Training of staff, safety precautions, and regulatory compliance are important aspects of the waste management process. The goal is to minimize infectious waste production, safely dispose of waste, and prevent the spread of hospital-acquired infections.
STERILIZATION PROCESS & MANAGEMENT
STERILIZATION PROCESS & MANAGEMENTHamzah Meraj, Faculty of Architecture, Jamia Millia Islamia, New delhi
STERILIZATION
PROCESS & MANAGEMENT
Sterilizationistheprocessusedtorenderaproductfreefromallformsofviablemicro-organisms(bacteria,spores,fungi,andviruses)
Sterilizationisrequiredbecausenotallmicro-organismshavebeencompletelydestroyedduringthedecontaminationprocess.
WithintheSPD,thesterilizationareaiswheresterilizers(steam,and/orlowtemperatureprocesses),arelocatedincludingthespaceforloading,unloading,andcooling.Thiscanbeaccommodatedbyatwoorthreezonesystem.OT sterilisation
The document provides guidelines for cleaning and disinfection procedures in an operating theatre. It discusses general cleaning including daily scrubbing and disinfecting of surfaces. It also describes procedures for disinfecting instruments using chlorine solutions or glutaraldehyde. Various sterilization methods are outlined like autoclaving of linen and steam sterilization of instruments. The document also discusses sampling and culturing techniques to test the cleanliness of surfaces in the operating theatre.
BIO-MEDICAL WASTE TREATMENT AND DISPOSAL OVERVIEW IN INDIA
this upload on bio-medical waste treatment and disposal overview is improved version of my previous upload on the subject. The presentation highlights the bio-medical treatment status at Allahabad, India. The content is the result of my experience gained from routine inspections of various health care facilities located in Allahabad region.
More Related Content
Viewers also liked
Army final ppt
The document discusses the performance appraisal system in the Pakistan Army and how it is linked to compensation. It provides background on the history and structure of the Pakistan Army. The performance appraisal process involves annual confidential reports for both officers and other ranks. Officers are evaluated on criteria like ability, leadership, and professional competence by multiple reporting officers. Techniques used include graphic rating scales, pen pictures, and behavioral anchored rating scales. While the performance evaluation does not directly impact base pay, it is indirectly linked to compensation and promotion recommendations. Politics and human factors can sometimes introduce errors into the appraisal process.
US President Air force one ppt
This is the ppt of US President's Air Force One on which he travel across the world and I am glad to present the ppt on this..
True pinoy
This document highlights characteristics of successful Filipino entrepreneurs. It profiles Henry Sy of SM Prime Holdings, Tony Caktiong of Jollibee, and Lucio Tan of Tanduay Holdings as pioneering Pinoy entrepreneurs in business. It also discusses successful Filipinos in other fields like fashion (Dr. Vicky Belo), entertainment (Nino Muhlach), sports, government (Manny Villar), and others (Socorro Ramos of National Bookstore). The document encourages Filipinos to ignite their potential and work hard, as these entrepreneurs did, to achieve success.
PHILIPPINE CONTEMPORARY POPULAR MUSIC-PINOY ROCK
Report on Pinoy Folk and Rock Music presented by my students Josh Villanueva, John Aguado and Marianne Dasal for my Philippine Contemporary Popular Music class in DLS-College of St. Benilde.
Pakistan - Armed Forces
The Pakistani military was formed after independence in 1947 and drew experienced officers from those who served under British rule. It has fought three wars against India and engaged in border skirmishes with Afghanistan and India. The military currently has over 921,000 active and reserve personnel across the army, navy, air force and paramilitary forces. It has participated in UN peacekeeping missions and provides disaster relief domestically and abroad.
Pakistan armed forces
Pakistan Armed Forces
Headquarters
Leadership
Chairman, Joint Chiefs of Staff Committee
General Khalid Shameem Wynne
Secretary of Defence
Nargis Sethi
Chief of Army Staff
Chief of Air Staff
Chief of Navy Staff
General Ashfaq Parvez Kayani
Air Chief Marshal Tahir Rafik Butt
Muhammad Asif Sandila
Manpower
Military age 16–49 years old[1]
Available for
military service 48,453,305 males, age 16–49 (2010 est.),
44,898,096 females, age 16–49 (2010 est.)
Fit for
military service 37,945,440 males, age 16–49 (2010 est.),
37,381,549 females, age 16–49 (2010 est.)
Expenditures
Budget $6.41 billion (2010–11) (ranked 35th)
Percent of GDP 2.6% (2008)
Foreign suppliers China
United States
France
Italy
Germany
Sweden
Turkey
Pakistan Armed Forces
The Pakistan Armed Forces, Musalah Afwaj-e-Pakistan) are the military forces of Pakistan. They are the seventh largest in the world in terms of active troops. The armed forces comprise three main branches:
the Pakistan Army, the Pakistan Navy (including the Pakistan Marines) and the Pakistan Air Force, together with a number of paramilitary forces.
Following 1962, Pakistan Armed Forces has had close military relations with the People's Republic of China, including development and research cooperation to enhance military system, such as on the JF-17 Thunder, K-8 Karakorum, and others as well. China is the leading supplier of military equipments to Pakistan.
The armed forces were formed in 1947 when Pakistan became independent from the British Empire.
Pakistan Armed Forces are the largest contributors to United Nations peacekeeping efforts, with more than 10,000 personnel deployed in 2007. Other foreign deployments have consisted of Pakistani military personnel as advisers in African and Arab countries.
History
Before 1947, most military officers of the newly formed Pakistan Armed Forces had served in the British Indian Army and fought in both World Wars and the numerous Anglo-Afghan Wars. Several experienced commanders who fought in the British military in World War II joined Pakistan Armed Forces giving it professionalism, experience and leadership. After independence, the military was supposed to have been divided between India and Pakistan with a ratio of 64% going to India and 36% for Pakistan; however, it is estimated that India refused to divide its share of equipment and some analyst suggest that Pakistan inherited a mere 15% of its allocated share.
The Pakistan Armed Forces have also taken over the Pakistani government several times since independence mainly on the pretext of lack of good civilian leadership, whom most Pakistanis regard as corrupt and inefficient. However, according to the political parties removed from power by the army, political instability, lawlessness and corruption are direct consequences of army rule.
TROOP STRENGTH
Pakistan’ Military is the seventh largest in th
7 lessons on Presentation Design from TED TALKS | Curly Films
TED TALKS was created in 1984 with a big mission in mind: to gather the most interesting people in the world, sharing their passion in about 18 minutes. TED stands today as the benchmark for the best presentations. Why? Because the best presentations entail a well-thought storytelling structure that easily sings to the audience. Curly Films - Storytelling Office shares 7 tips you can use in your own business presentations.
Viewers also liked (7)
7 lessons on Presentation Design from TED TALKS | Curly Films
7 lessons on Presentation Design from TED TALKS | Curly Films
Similar to Army Presentation
Sterile dosage form
This document discusses the production of sterile dosage forms. It covers topics such as types of sterile dosage forms including parenteral, ophthalmic, and pyrogen-free forms. It also discusses water for injection, types including water for injection, sterile water for injection, and bacteriostatic water for injection. Methods of sterilization are outlined like steam sterilization, dry heat, filtration, and radiation. Other areas covered include air classification systems, HEPA filters, and production line flow charts.
Menikini industry presentation
This document discusses the benefits of using saturated dry steam for industrial sanitizing over traditional cleaning methods. Dry steam requires only three stages - physical removal of dirt, cleaning with steam or steam/water/detergent, and drying. This is more efficient than the traditional six stage process. Dry steam is effective at killing pathogens due to thermal shock. It is also suitable for complex surfaces, does not damage delicate surfaces, saves water, and is environmentally friendly as it reduces detergent, water, and chemical waste. Studies show dry steam reduces bacterial contamination on surfaces to levels required by EU regulations. The document promotes dry steam cleaning for food, beverage, hospitality, and other industries.
Plaq_Dipho_EN_2014_HD
This document provides information on chemical burns and the use of DIPHOTERINE® solution for emergency treatment. It discusses:
- How chemicals like corrosives and irritants can burn the skin by destroying cells through chemical reactions.
- The limitations of using water alone for washing, as it can further damage tissues.
- How DIPHOTERINE® solution works as an effective washing agent by stopping the chemical reactions and preserving cells from further damage, through its amphoteric chelating properties.
- Clinical evidence and studies showing DIPHOTERINE® solution's effectiveness in treating chemical burns, even with delayed washing times, and preserving vision in serious eye burns.
Menikini katalog
The document discusses the benefits of industrial sanitizing using ecological dry steam. It can sanitize surfaces with only three stages compared to six for traditional methods. Dry steam is more environmentally friendly as it uses less water and chemicals. Studies show dry steam is highly effective at reducing bacterial and fungal contamination on surfaces. The document lists various industrial and commercial applications where dry steam cleaning provides economical, social, and environmental benefits over traditional cleaning methods.
Facility requirements for Hazardous drug Manufacturing
The document provides guidance for ensuring safety throughout the manufacturing process of hormonal drugs. It emphasizes the importance of personnel safety, environmental safety, and patient safety by following current good manufacturing practice guidelines. This includes minimizing risks of contamination and cross-contamination. The document then lists numerous regulatory and industry standards that should be referred to for sterile drug production.
BOWE_Factbook_EN
This document provides information about Böwe Textile Cleaning GmbH, a German manufacturer of dry cleaning machines. It summarizes the company's history, starting in 1945, and its development of innovative dry cleaning machines. It highlights key aspects of Böwe's premium line of machines, including their quality construction with round components, efficient drying systems, safety features, and multi-stage distillation process. The document also lists some of Böwe's satisfied customers around the world and installations of its machines.
Autoclave
The document discusses sterilization and autoclaves. It defines sterilization as removing microorganisms through processes like heat, chemicals, irradiation, or filtration. An autoclave is then described as a pressurized device that uses high temperature steam to achieve sterilization above water's boiling point. The document outlines the basic components, construction, and operating principles of autoclaves, including how increased pressure allows for higher sterilization temperatures. It also discusses autoclave usage, types, limitations, maintenance procedures, and quality control measures like indicators.
Autoclave
The autoclave is a device used to sterilize equipment and supplies using high pressure steam. It works by sealing items inside a chamber and raising the temperature above 100°C using pressurized steam, which is able to kill microorganisms like bacteria and viruses. Autoclaves have been used in healthcare settings since the late 19th century to safely sterilize surgical and dental tools. Modern autoclaves still function on these same principles, using precise temperature, pressure, and timing to eliminate all forms of microbial life that could cause infection. They must be properly maintained and cleaned regularly to ensure effective and safe sterilization.
Private dental practice after covid 19 pandemic outbreak
The document provides guidelines for private dental practices after the COVID-19 pandemic, including screening patients, using personal protective equipment like masks and gloves, maintaining infection control practices through measures like social distancing and disinfecting surfaces, and categorizing treatment based on patients' COVID-19 status. It also outlines recommendations for procedures, clinic maintenance, and managing costs associated with increased safety precautions. The guidelines are meant to help dental practices safely resume operations while preventing the spread of coronavirus.
Autoclave Steam Sterilizer - Pharmaceutical
Autoclave Steam Sterilizer is used in Microbiology, QC & Research laboratory in the Pharma industry for sterilization by steam. This laboratory sterilizer helps to demonstrate the temperature distribution in the loaded chamber is acceptable and that the items within the chamber receive a uniform heat treatment.
MMW - Product Portfolio
This document provides information on a company's portfolio of water purification products. It lists various models of water purification systems with their specifications, including reverse osmosis (RO) units, ultrafiltration units, and desalination units. The systems are intended for uses such as providing clean drinking water in humanitarian crises, expeditions, and for public buildings. Pictures and descriptions of some example models are provided, along with optional extras and specifications.
BMW Management
The document outlines guidelines for managing biomedical waste in hospitals. It discusses categorizing waste based on infectivity, proper segregation, collection, storage, and disposal methods. Training of staff, safety precautions, and regulatory compliance are important aspects of the waste management process. The goal is to minimize infectious waste production, safely dispose of waste, and prevent the spread of hospital-acquired infections.
STERILIZATION PROCESS & MANAGEMENT
STERILIZATION PROCESS & MANAGEMENTHamzah Meraj, Faculty of Architecture, Jamia Millia Islamia, New delhi
STERILIZATION
PROCESS & MANAGEMENT
Sterilizationistheprocessusedtorenderaproductfreefromallformsofviablemicro-organisms(bacteria,spores,fungi,andviruses)
Sterilizationisrequiredbecausenotallmicro-organismshavebeencompletelydestroyedduringthedecontaminationprocess.
WithintheSPD,thesterilizationareaiswheresterilizers(steam,and/orlowtemperatureprocesses),arelocatedincludingthespaceforloading,unloading,andcooling.Thiscanbeaccommodatedbyatwoorthreezonesystem.OT sterilisation
The document provides guidelines for cleaning and disinfection procedures in an operating theatre. It discusses general cleaning including daily scrubbing and disinfecting of surfaces. It also describes procedures for disinfecting instruments using chlorine solutions or glutaraldehyde. Various sterilization methods are outlined like autoclaving of linen and steam sterilization of instruments. The document also discusses sampling and culturing techniques to test the cleanliness of surfaces in the operating theatre.
BIO-MEDICAL WASTE TREATMENT AND DISPOSAL OVERVIEW IN INDIA
this upload on bio-medical waste treatment and disposal overview is improved version of my previous upload on the subject. The presentation highlights the bio-medical treatment status at Allahabad, India. The content is the result of my experience gained from routine inspections of various health care facilities located in Allahabad region.
MAC 222 Lec 4 Sterilization and disinfection.ppt
This document discusses various methods of sterilization and disinfection. It explains that sterilization kills all microbes including spores, while disinfection kills most but not all microbes or spores. Physical sterilization methods include moist heat above 100 degrees such as boiling and autoclaving, dry heat, radiation, and filtration. Chemical disinfectants range from high to low level and include alcohol, glutaraldehyde, chlorine releasing compounds, phenolic compounds, and hydrogen peroxide. Proper sterilization and disinfection are important for safety in laboratories and hospitals.
OT Fumigation presentation.pptx
Fumigation is a process used to sterilize operating theaters and other hospital areas using formaldehyde gas. It involves cleaning the area, sealing it, and heating a formaldehyde solution to generate gaseous formaldehyde. The gas kills microbes but is toxic, so protective equipment must be worn. After 12-24 hours, ammonia is released to neutralize the formaldehyde. A record of all fumigation details must be maintained. Several other toxic gases can also be used for fumigation but require special precautions due to their strong potency. Exposure to fumigation gases usually causes immediate side effects that are treated by inducing vomiting and giving medications to reduce the chemical concentration in the body.
WHO_Sterile Products.ppt
This document provides guidelines on good manufacturing practices for sterile pharmaceutical products. It discusses key requirements such as premises and equipment design to minimize contamination risks. It also covers processes like environmental monitoring, personnel training, sanitation procedures, and sterilization methods. Different air classifications are defined for areas depending on criticality of activities. Validation of sterile processes and periodic revalidation is emphasized to ensure sterility of products.
theater steri final uma (2) (1).pptx
1) Sterilization and disinfection have a long history dating back to ancient Greek and Roman times when practices like boiling water and hand washing were used.
2) In the 1800s, figures like Semmelweiss, Nightingale, and Lister advanced practices of sterilization and antisepsis in hospitals and operating rooms which reduced infection rates and mortality.
3) Modern sterilization practices in operating rooms focus on preventing surgical site infections through strict protocols for cleaning, disinfection, air filtration, sterile techniques, and care of equipment, personnel, and facilities.
Similar to Army Presentation (20)
Facility requirements for Hazardous drug Manufacturing
Facility requirements for Hazardous drug Manufacturing
Private dental practice after covid 19 pandemic outbreak
Private dental practice after covid 19 pandemic outbreak
BIO-MEDICAL WASTE TREATMENT AND DISPOSAL OVERVIEW IN INDIA
BIO-MEDICAL WASTE TREATMENT AND DISPOSAL OVERVIEW IN INDIA
Recently uploaded
Webinar: Designing a schema for a Data Warehouse
Are you new to data warehouses (DWH)? Do you need to check whether your data warehouse follows the best practices for a good design? In both cases, this webinar is for you.
A data warehouse is a central relational database that contains all measurements about a business or an organisation. This data comes from a variety of heterogeneous data sources, which includes databases of any type that back the applications used by the company, data files exported by some applications, or APIs provided by internal or external services.
But designing a data warehouse correctly is a hard task, which requires gathering information about the business processes that need to be analysed in the first place. These processes must be translated into so-called star schemas, which means, denormalised databases where each table represents a dimension or facts.
We will discuss these topics:
- How to gather information about a business;
- Understanding dictionaries and how to identify business entities;
- Dimensions and facts;
- Setting a table granularity;
- Types of facts;
- Types of dimensions;
- Snowflakes and how to avoid them;
- Expanding existing dimensions and facts.
June Patch Tuesday
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
Project Management Semester Long Project - Acuity
Acuity is an innovative learning app designed to transform the way you engage with knowledge. Powered by AI technology, Acuity takes complex topics and distills them into concise, interactive summaries that are easy to read & understand. Whether you're exploring the depths of quantum mechanics or seeking insight into historical events, Acuity provides the key information you need without the burden of lengthy texts.
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Taking AI to the Next Level in Manufacturing.pdf
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
Digital Marketing Trends in 2024 | Guide for Staying Ahead
https://www.wask.co/ebooks/digital-marketing-trends-in-2024
Feeling lost in the digital marketing whirlwind of 2024? Technology is changing, consumer habits are evolving, and staying ahead of the curve feels like a never-ending pursuit. This e-book is your compass. Dive into actionable insights to handle the complexities of modern marketing. From hyper-personalization to the power of user-generated content, learn how to build long-term relationships with your audience and unlock the secrets to success in the ever-shifting digital landscape.
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
Main news related to the CCS TSI 2023 (2023/1695)
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.Recently uploaded (20)
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
Digital Marketing Trends in 2024 | Guide for Staying Ahead
Digital Marketing Trends in 2024 | Guide for Staying Ahead
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
WeTestAthens: Postman's AI & Automation Techniques
WeTestAthens: Postman's AI & Automation Techniques
Army Presentation
- 1. TRATTARE IL RIFIUTO A BORDO
- 4. A SINGLE MACHINE TO SHRED DRY STERILIZE ANY KIND OF WASTE
- 6. 1. Sterilization chamber 2. Lid 3. Rotor 4. Motor 5. Stationary blade 6. IR pyrometer 7. Valve for water injection 8. Pockets for protection of biologic control kits 9. Treated product way-out valve 10. Container with waste to be treated 11. Loader 12. Vapours outlet 13. Pumps for vapours extraction 14. Condenser 15. Filter assembly 16. Vent outlet 17. Water connections 18. Pump for condensed 19. Condended outlet 20. Treated product outlet THE PROCESS
- 7. t - time (minutes) °C 0 5 10 15 20 25 0 ° 100 ° 200 °
- 8. PROCESS PHASES Is possible to treat the waste just with pasteurization process or with sterilization. Here is shown how the process change, based on the kind of process:
- 9. COMPLETELY SAFE THE FINAL PRODUCT IS VOLUME REDUCTION WEIGHT REDUCTION DRY NO SMELLS HIGH CALORIFIC VALUE
- 10. CONVERTER ADVANTAGES EASY TO SET-UP, no foundations are required CYCLE COMPLETELY AUTOMATIC NO SPECIFIC KNOWLEDGE FOR THE OPERATOR
- 11. NO PRESSURE EMERGENCY CYCLE FINAL PRODUCT COMPLETELY SAFE ZERO EMISSION SAFETY CONVERTER ADVANTAGES
- 12. CONVERTER FIELDS of APPLICATIONS Military hospitals, Medical aid centers, etc… H SERIE MO and DF SERIES Barracks, army structures, base fields, etc… Hospital Waste Including: Syringes, pipes, needles, scalpels, surgery waste, glass, plastics, gowns, etc… Unsorted Waste Including : Kitchen waste, municipal residuals, biological waste, packaging, cans, tins, glass, etc…
- 13. Military ships, platforms, aircraft carriers, etc… NV SERIE versione MOBILE Waste produced on board Including: Kitchen waste, infective medical waste, municipal residuals, biological waste, packaging, cans, tins, glass, etc… To take action immediately, wherever there is an emergency. CONVERTER FIELDS of APPLICATIONS
- 14. MOBILE VERSION COMPLETELY SELF-WORKING
- 16. Converter H25 Mobile Version Camouflage painting
- 17. OMP has a recognized organization, certified under the norms TS 16949:2002, UNI EN ISO 9001:2000 e UNI EN ISO 14001:2004 CERTIFICATIONS
- 18. Officine Meccaniche Pejrani srl Strada Moncalieri 99/36 Frazione Tetti Caglieri 10048 – Vinovo (To) ITALY