Potassium polyacrylate, also known as TRUE HYDROGEL, is a potassium salt of polyacrylic acid that functions as a water-retaining polymer. It can be applied dry by mixing 2-5 kg of TRUE HYDROGEL per cubic meter of backfill soil or 5 grams per liter of smaller soil quantities. TRUE HYDROGEL can also be used wet by dipping plant roots in a prepared solution before planting or in greenhouses by mixing 1-3 g of TRUE HYDROGEL per liter of growing substrate. For broadcast application, TRUE HYDROGEL is mixed into soil at a depth of 10 to 15 cm at a recommended rate before seeding or planting

1. TRUE HYDROGEL
Potassium polyacrylate is
a potassium salt of
polyacrylic acid with the
chemical formula
[−CH₂−CH−]n

2. How to use?
Dry Application
Large amounts like for the backfill around trees and the shrubs use 2-5 kg
of TRUE HYDROGEL/m3 or 1 litre of soil.
Smaller quantities of soil, use 5 grams of TRUE HYDROGEL for 1 litre
of soil.

3. Wet Application
Certain small plants’ roots and seedlings can be directly dipped into the
already prepared TRUE HYDROGEL before the plants are actually
planted. For this purpose, use 5 grams of TRUE HYDROGEL for 1 litre of
soil.

4. Greenhouse Application
Mix the TRUE HYDROGEL into the plant media at a concentration of 1
to 3 g/l or 1 to 3 kg/m3 of the substrate before planting. Irrigation is
required immediately after the planting is done in the container till the
soil gets saturated.

5. Broadcast Application
TRUE HYDROGEL is properly mixed and incorporated in the soil at a
recommended depth of 4 to 6 inches i.e. 10 to 15 cm before sowing or planting the
seed or during fertilizer application.