Anil Jain, one of the successful manufacturers of refrigerants, says the ways to arrest refrigerant gas leaks in a cylinder. Do not miss to read this informative article and be a part of threat to the atmosphere.

1. Anil Jain explained How to Arrest Refrigerant Gas Leaks in a Cylinder
Anil Jain, one of the successful manufacturers of refrigerants, says the ways to arrest refrigerant gas
leaks in a cylinder. Do not miss to read this informative article and be a part of threat to the
atmosphere.
Everyone isaware of the fact that refrigerants are nothing but substances capable of converting easily
from liquid to gaseous state. Hence, their application has increased day-by-day in several domains,
despite the high risk factors associated with their usage. Usually, refrigerants are stored in disposable
cylinders for application in air conditioners and refrigerators. Such kind of cylinders must be handled
withcare and it is mandatory to be aware of the hazards occurring due to leakage of refrigerant gases.
Anil Jain, Refex Industries Limited CEO guides us with few effective ways to prevent such kind of
accidents.
Anil Jain ‘Arrest of Gas Leaks’ in Cylinders – Simple and Effective Methods
Step 1 – Locate the Leak

2. The bestand most definitewayto identify exactlywhere the refrigerantleak hasoccurred isto use a gas
leakdetector.Thistype of detector will specifically detect the leak from a refrigerant coolant. You can
easily locate the exact leak area if you monitor the cylinder by a detector. The detector alerts the user
by providing audio-visual signal. In addition, you can apply soap oil on the spot to ascertain the leak.
Once the leak spot is identified, you must rectify it immediately.
Step 2 – Remove the Refrigerant
Before beginningto repairthe unit,youneedto remove the entire refrigerant from the cylinder. To do
this,youmust connecta refrigerantpumpto the cylinderandempty the refrigerantcoolant completely.
Pump usage and connections may vary slightly depending on the manufacturer. Hence, be certain to
read the manufacturer’s instruction manual thoroughly before using the pump. Finally, you must
condense the leftover vapour and make it danger-free.
Step 3 – Fix the Leak
If the leakisfoundin the valve, firstly you must clean the valve thoroughly and perform hydro testing.
Once done, make sure it is properly attached to the cylinder. After rectifying the value, retest the
cylinderwith a gas detector. If you still sense the leakage, you must replace the valve for sure, that is,
removing the existing valve and attaching a new one in its place.
Anil Jain Gases Leak – Precautionary Actions
 Please go through the product label and safety data sheet.
 Make sure there is enough ventilation.
 Do not expose refrigerant cylinders to sparks, flames or hot objects.
 While handling refrigerants, it is good to wear impervious gloves, safety glasses and other
protective device.
 In case of contact witheyesor skin, wash immediately with water and seek medical attention.
 If any chemical spills on the cylinder, immediately clear the surrounding.
 Never hit or drop the cylinder with any other object.
 Do not lift the cylinder holding the valve.
 Never leave an empty cylinder open because moisture in the atmosphere may enter.
 Never apply direct flame or live steam to the cylinder.
 Keep kids away from the usage area.

3. For additional information regarding Anil Jain arrest methods, kindly visit www.refex.co.in or
www.taniljain.com