Andy rail mono, bullet, land-sea craft1
•Download as PPTX, PDF•
0 likes•237 views
BUSINESS- INV 20 Bn$ REPAID 40 Bn$ in 4 Yrs` * CROSS COUNTRY SHIPPING 330 knots. SAVES 48,700 KM * OPEN CAST MINING DESERT SAND, COAL, ORE, SOIL BY NEW METHOD EXCAVATOR, SHIP 330 knt AT PIT LOAD, STORE DROP. * FPSO 3 MM WALL THICK. 3000 M DIA/DEPTH 21.2 Bn CBM. $100/CBM * ALL FUELS- FOSSIL, RENEWABLE FUELS POWER PLANTS * POWER PLANTS- COAL, LNG, OIL, NUCLEAR, CSP SOLAR ON BARGE. * 660 knt[ JET SPEED] FERRY FARE 1C/KM ROI= 1440 % * CONTAINER 330 knt FREIGHT 60C/KM/TEU ROI= 1080 % * JET 1200 KMPH FARE 2.5 C/KM ROI= 120 % * MISSILE 3, 6 MACH
Report
Share
Report
Share
![DESIGN COMPARED for SAME TON-HP
ITEMS NOW ANDY
WEIGHT 1000 T 1000 T
SPEED 100 300 kmph
HP 6250 6250
VOLUME 156 52 Lit
FUEL 625 210 Lit/Hr
KMPL 0.16 1.43 [9 Times]
M A APPAN, M E](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
Andy rail mono, bullet, land-sea craft
Andy Rail-Mono, Bullet, Land-Sea is a new transportation system designed by M.A. Appan, an engineer with 45 years of experience, that can operate on rail up to 600 kmph, on ground without rail up to 820 kmph, and both land and sea, carrying 1000-10,000 tons of cargo. The system has significantly higher speed and fuel efficiency compared to current options - it can achieve speeds 3 times higher and use only 1/3 the fuel for the same ton-horsepower. This is achieved through reduced rolling friction at wheels and drag and doze reduction at the nose. Financial analysis shows the new design would have much higher return on investment and generate more royalty income for the
Automotive
The document describes Andy's new designs for vehicles that significantly improve fuel efficiency and reduce emissions compared to current designs. Andy's bike design uses 1/3 the fuel and emits 1/6 the CO2 while achieving double the speed. His car and truck designs also use less fuel, produce fewer emissions, and have higher fuel efficiency and speeds than current designs. The document also briefly outlines Andy's new sea vehicle design with a single axle and front steering and rear propulsion without rear wheels. Andy's engine can use all fuels and is smaller than current engines but provides comparable power output. Production of Andy's vehicles is estimated to require investments of $30-100 million but yield profits of $150-200 million.
Car 2 t 1800 cc
The document compares the specifications of two cars, Andy's car and a normal car. Andy's car has the same power and volume as the normal car but doubles its speed and has twice the fuel efficiency while emitting half the CO2 and costing $1000 less. It achieves this through innovations like Andy Engine and Bearing which provide twice the speed for the same ton-horsepower and double the kilometers per liter along with low rolling friction at the front wheels for automotive low carbon design.
Ship, Ferry, Vlcc
The document proposes designs for ships, ferries, and cargo vessels that use an "Andy engine" and bearing technology. The Andy designs claim to achieve double the speed of conventional designs using less fuel and producing lower emissions. Specific designs are provided for ships weighing 1000 tons, ferries weighing 500-1000 tons, very large crude carriers (VLCCs) weighing 50,000-150,000 tons, and cargo vessels. The Andy designs are estimated to have higher fuel efficiency, speed, and lower carbon emissions compared to conventional designs.
X Prize Automotive
- The document describes a new automotive design by Andy Technology that runs on all fuels including solids, liquids, and gases. It consists of an Andy engine, Andy bearing, and jet components.
- The key advantages of the Andy design are higher speed (up to 166 kph), higher mileage (500% more), and lower fare (1/10 the cost per km) compared to conventional vehicles. It also uses 1/3 the volume of fuel and has 1/3 the CO2 emissions and 2/3 higher efficiency.
- Applying the Andy Technology could save billions per day in fuel costs and reduce CO2 emissions globally for automotive, rail, shipping, power plants and other sectors.
I i s f 2017 business present.ppt
The document describes a renewable energy technology called Catapult Water Renewable Energy developed by Muthukal Andy Appan. It uses the thrust from deep sea water at 6000 meters to power transportation and electricity generation without engines, fuel, or greenhouse gas emissions. Tables show the estimated fuel savings and costs for using this technology to power various vehicles and generate electricity at different megawatt scales. Required investments are also listed.
Rail
The document describes Andy's new rail design which uses 1/3 the fuel for the same horsepower and doubles the speed through low rolling friction bearings. It achieves 2.5x the speed, 7.5x the fuel efficiency and 1/7.5 the carbon emissions. The design is then scaled up further to achieve speeds of 1500-3000 kmph for large train-ships carrying 150,000 gross register tons traveling on sea, land and sea.
B p of low c, transports 500 mn$
This document proposes a new low carbon bus design that uses half the engine volume and fuel compared to a normal bus, while maintaining the same speed, seating capacity, and vehicle performance. It estimates that the low carbon bus would save 72,000 liters of fuel per year and reduce CO2 emissions by 2400 grams per kilometer. A business plan is outlined to invest 500 million dollars to manufacture 4,500 of the new low carbon buses, which is estimated to generate a net profit of 410 million dollars and an 82% return on investment within 3 years.
Recommended
Andy rail mono, bullet, land-sea craft
Andy Rail-Mono, Bullet, Land-Sea is a new transportation system designed by M.A. Appan, an engineer with 45 years of experience, that can operate on rail up to 600 kmph, on ground without rail up to 820 kmph, and both land and sea, carrying 1000-10,000 tons of cargo. The system has significantly higher speed and fuel efficiency compared to current options - it can achieve speeds 3 times higher and use only 1/3 the fuel for the same ton-horsepower. This is achieved through reduced rolling friction at wheels and drag and doze reduction at the nose. Financial analysis shows the new design would have much higher return on investment and generate more royalty income for the
Automotive
The document describes Andy's new designs for vehicles that significantly improve fuel efficiency and reduce emissions compared to current designs. Andy's bike design uses 1/3 the fuel and emits 1/6 the CO2 while achieving double the speed. His car and truck designs also use less fuel, produce fewer emissions, and have higher fuel efficiency and speeds than current designs. The document also briefly outlines Andy's new sea vehicle design with a single axle and front steering and rear propulsion without rear wheels. Andy's engine can use all fuels and is smaller than current engines but provides comparable power output. Production of Andy's vehicles is estimated to require investments of $30-100 million but yield profits of $150-200 million.
Car 2 t 1800 cc
The document compares the specifications of two cars, Andy's car and a normal car. Andy's car has the same power and volume as the normal car but doubles its speed and has twice the fuel efficiency while emitting half the CO2 and costing $1000 less. It achieves this through innovations like Andy Engine and Bearing which provide twice the speed for the same ton-horsepower and double the kilometers per liter along with low rolling friction at the front wheels for automotive low carbon design.
Ship, Ferry, Vlcc
The document proposes designs for ships, ferries, and cargo vessels that use an "Andy engine" and bearing technology. The Andy designs claim to achieve double the speed of conventional designs using less fuel and producing lower emissions. Specific designs are provided for ships weighing 1000 tons, ferries weighing 500-1000 tons, very large crude carriers (VLCCs) weighing 50,000-150,000 tons, and cargo vessels. The Andy designs are estimated to have higher fuel efficiency, speed, and lower carbon emissions compared to conventional designs.
X Prize Automotive
- The document describes a new automotive design by Andy Technology that runs on all fuels including solids, liquids, and gases. It consists of an Andy engine, Andy bearing, and jet components.
- The key advantages of the Andy design are higher speed (up to 166 kph), higher mileage (500% more), and lower fare (1/10 the cost per km) compared to conventional vehicles. It also uses 1/3 the volume of fuel and has 1/3 the CO2 emissions and 2/3 higher efficiency.
- Applying the Andy Technology could save billions per day in fuel costs and reduce CO2 emissions globally for automotive, rail, shipping, power plants and other sectors.
I i s f 2017 business present.ppt
The document describes a renewable energy technology called Catapult Water Renewable Energy developed by Muthukal Andy Appan. It uses the thrust from deep sea water at 6000 meters to power transportation and electricity generation without engines, fuel, or greenhouse gas emissions. Tables show the estimated fuel savings and costs for using this technology to power various vehicles and generate electricity at different megawatt scales. Required investments are also listed.
Rail
The document describes Andy's new rail design which uses 1/3 the fuel for the same horsepower and doubles the speed through low rolling friction bearings. It achieves 2.5x the speed, 7.5x the fuel efficiency and 1/7.5 the carbon emissions. The design is then scaled up further to achieve speeds of 1500-3000 kmph for large train-ships carrying 150,000 gross register tons traveling on sea, land and sea.
B p of low c, transports 500 mn$
This document proposes a new low carbon bus design that uses half the engine volume and fuel compared to a normal bus, while maintaining the same speed, seating capacity, and vehicle performance. It estimates that the low carbon bus would save 72,000 liters of fuel per year and reduce CO2 emissions by 2400 grams per kilometer. A business plan is outlined to invest 500 million dollars to manufacture 4,500 of the new low carbon buses, which is estimated to generate a net profit of 410 million dollars and an 82% return on investment within 3 years.
Sgp Power Point 2nd Submission
The document discusses how vehicle fuel efficiency and environmental friendliness has changed since the early 1900s. It provides information on advances in gasoline, electric vehicles, and fuel cells that have led to more efficient and less polluting vehicles. These include hydrogen fuel cell vehicles that have zero emissions, and hybrid electric vehicles that have lower emissions than gas-powered cars. The future of transportation is moving towards more widespread use of hydrogen and electric vehicles.
Automotive car 60 kmpl
The document describes an automotive car that achieves 60 kilometers per liter (kmpl) of fuel efficiency. It is developed by Andy Transport Technology and uses Andy Engine and Andy Bearing components. The car can reach 200 kph with an engine of 600cc that uses only 10/3 or 3.33 liters of fuel per hour, resulting in a fuel efficiency of 60 kmpl. It costs $15,000 and emits 7750 grams of carbon dioxide per hour. It was created by M Andy Appan, a mechanical engineer with 45 years of experience.
Transport Profit Run
Andy Technology has developed a rotary engine called the Andy Engine that requires 1/3 the volume, fuel, and carbon emissions compared to normal engines to produce the same horsepower. The Andy Engine and Andy Bearing technology allow vehicles to operate at double the speed for the same horsepower-tonnage ratio, using only 1/3 the fuel. This can result in up to 6 times the fuel efficiency (kmpl), 1/3 the carbon emissions, and 2/3 lower operating costs per ton-km compared to normal engines. The Andy Rotary Engine comes in various sizes from 30cm to 650cm in diameter and can produce power outputs from 175HP to 1.8 million HP while using only a fraction of
3 phase energy transport
This document discusses 3 types of energy resources for transportation: low carbon, no carbon, and free renewable energy from the sea bed. It describes Andy Transport Technology, which can double vehicle speed while using 1/3 the normal fuel. Vehicles powered by this technology would produce 1/6 the normal carbon emissions. Examples are given of potential applications to various vehicles like bikes, cars, trucks, rail, and ships. Free renewable energy transport is described using a catapult method to access high pressure water at sea depths of 6000 meters, requiring no engine or fuel. Performance metrics like tonnage, speed, horsepower needs, and fuel usage are listed for sample vehicles.
Automotive car 60 kmpl
The document describes an automotive technology that can achieve 60 kilometers per liter of fuel (kmpl) efficiency. The technology was developed by Andy Transport Technology and uses an Andy Engine and Andy Bearing components. It can achieve double the speed and use 1/3 the fuel compared to traditional engines per ton-horsepower. The technology results in 6 times the fuel efficiency, 33% lower carbon emissions, and 66% lower cost of energy. It can power a car to travel 200 kph using only 10/3 or 3.33 liters of fuel per hour, achieving a fuel efficiency of 60 kmpl. The cost of the technology is $15,000 and it produces 7750 grams of carbon emissions per hour. The
Formula 1 800 hp..800 cc same hp, 2 x speed
The document compares key specifications of a Formula 1 car, a regular car, and a new design concept from Andy Technology. Some key points of comparison include: the Formula 1 car has half the weight but twice the power of a regular car, uses much less fuel but has over twice the speed; the new Andy Technology design concept claims to achieve double the speed of a Formula 1 car using the same power but only one-third of the fuel, and six times the fuel efficiency resulting in one-sixth the carbon emissions.
Automotive
The document describes Andy's new designs for vehicles including bikes, cars, trucks, and a new sea car/bus that promise to significantly increase fuel efficiency and speed while reducing emissions. Some key features include smaller, more efficient rotary engines that can run on all fuels, lower rolling resistance, and jet propulsion. Analysis shows the new designs could achieve 2x speed, 6x kilometers per liter of fuel, and 1/6 the carbon emissions compared to traditional vehicles. The investment required for setting up production is estimated to be 200 million dollars and could see a 250% return on investment.
2 t car design
This document presents design specifications and performance metrics for various vehicle types including transport cars, race cars, bikes, trucks, mono-rails, ships, and ferries. It shows how new designs can achieve significant reductions in fuel consumption and carbon emissions compared to normal designs. For example, a new 2 ton transport car design can achieve 200 kmph speed on 100 HP using only 1/3 the fuel and reducing CO2 emissions by 33% compared to normal designs.
Andy Motors Fwd Profit
Andy Motors has developed a new Forward Wheel Drive (FWD) technology that can increase vehicle speed by 225% and fuel efficiency by 750% for the same ton-horsepower compared to current vehicles. The technology reduces CO2 emissions by 86.67% on average across bikes, cars, and trucks. Financial projections show the FWD technology investment of $4.6 billion would generate $22.05 billion in profits over 479%.
How to draw on the remarkable
This document discusses how innovation in technology, business models, and policy can help address challenges related to energy, climate change, food supply, and population growth. It provides examples of dramatic cost reductions in solar and wind energy as well as projections that renewable energy costs will continue to fall below grid prices. While problems remain, the document argues they are solvable if we draw on the power of ideas to drive further innovation in technology, business, and policy and through global cooperation.
Remat program
The document presents the REMAT program in Romania, which aims to reduce pollution by offering vouchers for trading in old, high-emission vehicles and tractors over 10 years old for newer, lower-emission models. Specifically, the program offers vouchers worth 3000 RON for cars and 17,000 RON for tractors to cover part of the cost of a new, cleaner vehicle. The goal is to upgrade the vehicle fleet and reduce carbon dioxide emissions from transportation and agricultural machinery.
Bp no carbon bus business 500 mn$
This document proposes a new design for transportation vehicles that uses air jet propulsion instead of an engine or fuel. Key points:
- The design would use compressed air at 30 bar pressure from a separate vessel to propel buses and other vehicles instead of a combustion engine or fuel.
- A sample 40-seat bus running 20 hours per day, 360 days per year on compressed air would have no fuel costs or carbon emissions compared to a normal bus. Fares could be kept low at 1-2 cents per kilometer.
- A business plan outlines investing $500 million to build the necessary facilities and purchase 2,400 buses. The estimated annual net profit would be $201.6 million, yielding a
Automotive
The document discusses Andy's new designs for automotive bikes, cars, trucks, and a new sea car/bus. Some key points:
- Andy's designs claim to use 1/3 the fuel for the same horsepower as normal designs, double the speed through low friction, and produce 1/6 the CO2 emissions.
- Specifications are provided for a sample bike, car, and truck comparing the parameters of Andy's design to normal designs, showing improvements such as higher fuel efficiency, lower emissions, and higher speeds for Andy's designs.
- Details are given for Andy's new rotary engine design claiming to run on all fuels and produce horsepower through a compact internal/external combustion system
Andy technology renewable energy. no ghge. 120 ppm
The document describes a new technology called Catapult Energy that harnesses renewable energy from the ocean to provide thrust and power without greenhouse gas emissions. It works by installing structures at depths of 3,500-6,000 meters underwater that could generate over 1.23 million pounds of thrust per square foot and supply energy to transportation industries like automotive, rail, shipping, and aerospace as well as power plants. This new technology is estimated to save $14.4 trillion annually globally by replacing fossil fuel infrastructure and needs $360 billion in initial investment over two years.
Air motor
The document discusses the efficiency of air motors compared to electric vehicles (EVs). It states that air motors can be more efficient than EVs and can power various transportation methods like bikes, cars, trucks, and rail. Air is compressed isothermally in multiple stages by a water pump at pressures of 3, 6, 9, and 12 kg/cm2, saving up to 50% of energy through regeneration. Tables show comparisons of efficiency and costs for different vehicles powered by gas, electricity, and compressed air. Air motors can range in size from 100mm diameter to 1360mm diameter and are used for electric motors in domestic, industrial, and transportation applications without overhead electric lines.
Andy low c , low fare transport
This document outlines transportation options and their associated costs, speeds, fuel efficiency and returns on investment. It compares trucks, rail, ferries, containerships, jets and missiles based on metrics like cost per kilometer transported, fuel efficiency and speed. It also lists contact information for M Andy Appan, a 48-year-old engineering expert from India and Malaysia.
Usa trade potential
This document identifies potential areas for international business partnerships and transportation technologies with high returns. It outlines opportunities in areas like automotive, bullet trains, cargo and container ships, ferries, oil tankers, gas platforms, and jet technologies that can operate at speeds from 1200 to 3600 km/h. It also discusses opportunities for all types of thermal power plants that do not require boilers or turbines and can use various fuels. The document claims these "Andy technologies" can reduce fuel use and emissions by 33% for the same power output. Large investments could be recouped within two years, reducing carbon emissions and generating annual returns of $15 trillion.
Andy technology automotive cost paid back in days
1) Andy Bearing and Jet technology can reduce fuel consumption and pay back the additional cost in a short period of time for vehicles like bikes, cars, and trucks compared to same vehicles without the technology.
2) For bikes, the extra cost is paid back in 15 days, for cars the extra cost is paid back in 38 days, and for trucks the extra cost is paid back in 63 days through reduced fuel costs from improvements in rolling friction and speed.
3) The document provides examples of fuel cost savings calculations based on usage hours and distance traveled to show the payback period for the added costs of Andy Bearing and Jet technologies for different vehicle types.
Andy technology automotive
1. Andy Transport Technology proposes new engine and bearing designs that can double or triple speed while reducing fuel consumption by 1/3 for the same ton-horsepower output in automotive, rail, ship, jet, and missile transport.
2. The new Andy Engine design uses a modified slider crank mechanism to generate 3 times the torque of a conventional engine for the same changes in pressure-volume, allowing it to develop the same power in 1/3 the volume or 300% power in the same volume while consuming the same fuel.
3. The Andy Bearing fits below non-drive wheels to reduce rolling friction and drag, potentially doubling vehicle speed when taking up 50% of the load.
Usa trade potential
This document identifies potential areas for international business partnerships and transportation technologies with high returns. It outlines opportunities in areas like automotive, bullet trains, cargo and container ships, ferries, oil tankers, gas platforms, and jet technologies that can operate at speeds from 1200 to 3600 km/h. It also discusses opportunities for all types of thermal power plants that do not require boilers or turbines and can use various fuels. The document claims these "Andy technologies" can reduce fuel use and emissions by 33% for the same power output. Global investments in these technologies could yield $15 trillion annually in returns while demonstrating technologies with a $2 million investment.
Sea car data1
The document contains technical specifications for two sea car prototypes developed by Delhi Firm Data Andy. The first prototype weighs 10 tons, can carry 40 passengers at 600 kmph with 330 horsepower at a cost of 1.2 Cr Rs. The second larger prototype weighs 100 tons, can carry 200 passengers at 600 kmph with 50 horsepower at a cost of 5 Cr Rs. Both were developed by lead engineer Muthukal Andy Appan with a technical demonstration of the first prototype in Chennai.
Fpso. 10 tips for econo fpso1
The document provides 10 tips for creating an economical FPSO (floating production storage and offloading vessel). The tips include splitting the FPSO into a drillship and FSO to reduce capital costs, using an Andy Rotary Engine to power the vessel and reduce operating costs associated with fuel, implementing proper staffing and management, adopting efficient technologies, and aiming for a 20% internal rate of return at $50 per barrel of oil to ensure the project's viability. By following these tips, the document estimates that $108 million in capital costs could be saved, covering ongoing operating expenses.
More Related Content
What's hot
Sgp Power Point 2nd Submission
The document discusses how vehicle fuel efficiency and environmental friendliness has changed since the early 1900s. It provides information on advances in gasoline, electric vehicles, and fuel cells that have led to more efficient and less polluting vehicles. These include hydrogen fuel cell vehicles that have zero emissions, and hybrid electric vehicles that have lower emissions than gas-powered cars. The future of transportation is moving towards more widespread use of hydrogen and electric vehicles.
Automotive car 60 kmpl
The document describes an automotive car that achieves 60 kilometers per liter (kmpl) of fuel efficiency. It is developed by Andy Transport Technology and uses Andy Engine and Andy Bearing components. The car can reach 200 kph with an engine of 600cc that uses only 10/3 or 3.33 liters of fuel per hour, resulting in a fuel efficiency of 60 kmpl. It costs $15,000 and emits 7750 grams of carbon dioxide per hour. It was created by M Andy Appan, a mechanical engineer with 45 years of experience.
Transport Profit Run
Andy Technology has developed a rotary engine called the Andy Engine that requires 1/3 the volume, fuel, and carbon emissions compared to normal engines to produce the same horsepower. The Andy Engine and Andy Bearing technology allow vehicles to operate at double the speed for the same horsepower-tonnage ratio, using only 1/3 the fuel. This can result in up to 6 times the fuel efficiency (kmpl), 1/3 the carbon emissions, and 2/3 lower operating costs per ton-km compared to normal engines. The Andy Rotary Engine comes in various sizes from 30cm to 650cm in diameter and can produce power outputs from 175HP to 1.8 million HP while using only a fraction of
3 phase energy transport
This document discusses 3 types of energy resources for transportation: low carbon, no carbon, and free renewable energy from the sea bed. It describes Andy Transport Technology, which can double vehicle speed while using 1/3 the normal fuel. Vehicles powered by this technology would produce 1/6 the normal carbon emissions. Examples are given of potential applications to various vehicles like bikes, cars, trucks, rail, and ships. Free renewable energy transport is described using a catapult method to access high pressure water at sea depths of 6000 meters, requiring no engine or fuel. Performance metrics like tonnage, speed, horsepower needs, and fuel usage are listed for sample vehicles.
Automotive car 60 kmpl
The document describes an automotive technology that can achieve 60 kilometers per liter of fuel (kmpl) efficiency. The technology was developed by Andy Transport Technology and uses an Andy Engine and Andy Bearing components. It can achieve double the speed and use 1/3 the fuel compared to traditional engines per ton-horsepower. The technology results in 6 times the fuel efficiency, 33% lower carbon emissions, and 66% lower cost of energy. It can power a car to travel 200 kph using only 10/3 or 3.33 liters of fuel per hour, achieving a fuel efficiency of 60 kmpl. The cost of the technology is $15,000 and it produces 7750 grams of carbon emissions per hour. The
Formula 1 800 hp..800 cc same hp, 2 x speed
The document compares key specifications of a Formula 1 car, a regular car, and a new design concept from Andy Technology. Some key points of comparison include: the Formula 1 car has half the weight but twice the power of a regular car, uses much less fuel but has over twice the speed; the new Andy Technology design concept claims to achieve double the speed of a Formula 1 car using the same power but only one-third of the fuel, and six times the fuel efficiency resulting in one-sixth the carbon emissions.
Automotive
The document describes Andy's new designs for vehicles including bikes, cars, trucks, and a new sea car/bus that promise to significantly increase fuel efficiency and speed while reducing emissions. Some key features include smaller, more efficient rotary engines that can run on all fuels, lower rolling resistance, and jet propulsion. Analysis shows the new designs could achieve 2x speed, 6x kilometers per liter of fuel, and 1/6 the carbon emissions compared to traditional vehicles. The investment required for setting up production is estimated to be 200 million dollars and could see a 250% return on investment.
2 t car design
This document presents design specifications and performance metrics for various vehicle types including transport cars, race cars, bikes, trucks, mono-rails, ships, and ferries. It shows how new designs can achieve significant reductions in fuel consumption and carbon emissions compared to normal designs. For example, a new 2 ton transport car design can achieve 200 kmph speed on 100 HP using only 1/3 the fuel and reducing CO2 emissions by 33% compared to normal designs.
Andy Motors Fwd Profit
Andy Motors has developed a new Forward Wheel Drive (FWD) technology that can increase vehicle speed by 225% and fuel efficiency by 750% for the same ton-horsepower compared to current vehicles. The technology reduces CO2 emissions by 86.67% on average across bikes, cars, and trucks. Financial projections show the FWD technology investment of $4.6 billion would generate $22.05 billion in profits over 479%.
How to draw on the remarkable
This document discusses how innovation in technology, business models, and policy can help address challenges related to energy, climate change, food supply, and population growth. It provides examples of dramatic cost reductions in solar and wind energy as well as projections that renewable energy costs will continue to fall below grid prices. While problems remain, the document argues they are solvable if we draw on the power of ideas to drive further innovation in technology, business, and policy and through global cooperation.
Remat program
The document presents the REMAT program in Romania, which aims to reduce pollution by offering vouchers for trading in old, high-emission vehicles and tractors over 10 years old for newer, lower-emission models. Specifically, the program offers vouchers worth 3000 RON for cars and 17,000 RON for tractors to cover part of the cost of a new, cleaner vehicle. The goal is to upgrade the vehicle fleet and reduce carbon dioxide emissions from transportation and agricultural machinery.
Bp no carbon bus business 500 mn$
This document proposes a new design for transportation vehicles that uses air jet propulsion instead of an engine or fuel. Key points:
- The design would use compressed air at 30 bar pressure from a separate vessel to propel buses and other vehicles instead of a combustion engine or fuel.
- A sample 40-seat bus running 20 hours per day, 360 days per year on compressed air would have no fuel costs or carbon emissions compared to a normal bus. Fares could be kept low at 1-2 cents per kilometer.
- A business plan outlines investing $500 million to build the necessary facilities and purchase 2,400 buses. The estimated annual net profit would be $201.6 million, yielding a
Automotive
The document discusses Andy's new designs for automotive bikes, cars, trucks, and a new sea car/bus. Some key points:
- Andy's designs claim to use 1/3 the fuel for the same horsepower as normal designs, double the speed through low friction, and produce 1/6 the CO2 emissions.
- Specifications are provided for a sample bike, car, and truck comparing the parameters of Andy's design to normal designs, showing improvements such as higher fuel efficiency, lower emissions, and higher speeds for Andy's designs.
- Details are given for Andy's new rotary engine design claiming to run on all fuels and produce horsepower through a compact internal/external combustion system
What's hot (13)
More from google
Andy technology renewable energy. no ghge. 120 ppm
The document describes a new technology called Catapult Energy that harnesses renewable energy from the ocean to provide thrust and power without greenhouse gas emissions. It works by installing structures at depths of 3,500-6,000 meters underwater that could generate over 1.23 million pounds of thrust per square foot and supply energy to transportation industries like automotive, rail, shipping, and aerospace as well as power plants. This new technology is estimated to save $14.4 trillion annually globally by replacing fossil fuel infrastructure and needs $360 billion in initial investment over two years.
Air motor
The document discusses the efficiency of air motors compared to electric vehicles (EVs). It states that air motors can be more efficient than EVs and can power various transportation methods like bikes, cars, trucks, and rail. Air is compressed isothermally in multiple stages by a water pump at pressures of 3, 6, 9, and 12 kg/cm2, saving up to 50% of energy through regeneration. Tables show comparisons of efficiency and costs for different vehicles powered by gas, electricity, and compressed air. Air motors can range in size from 100mm diameter to 1360mm diameter and are used for electric motors in domestic, industrial, and transportation applications without overhead electric lines.
Andy low c , low fare transport
This document outlines transportation options and their associated costs, speeds, fuel efficiency and returns on investment. It compares trucks, rail, ferries, containerships, jets and missiles based on metrics like cost per kilometer transported, fuel efficiency and speed. It also lists contact information for M Andy Appan, a 48-year-old engineering expert from India and Malaysia.
Usa trade potential
This document identifies potential areas for international business partnerships and transportation technologies with high returns. It outlines opportunities in areas like automotive, bullet trains, cargo and container ships, ferries, oil tankers, gas platforms, and jet technologies that can operate at speeds from 1200 to 3600 km/h. It also discusses opportunities for all types of thermal power plants that do not require boilers or turbines and can use various fuels. The document claims these "Andy technologies" can reduce fuel use and emissions by 33% for the same power output. Large investments could be recouped within two years, reducing carbon emissions and generating annual returns of $15 trillion.
Andy technology automotive cost paid back in days
1) Andy Bearing and Jet technology can reduce fuel consumption and pay back the additional cost in a short period of time for vehicles like bikes, cars, and trucks compared to same vehicles without the technology.
2) For bikes, the extra cost is paid back in 15 days, for cars the extra cost is paid back in 38 days, and for trucks the extra cost is paid back in 63 days through reduced fuel costs from improvements in rolling friction and speed.
3) The document provides examples of fuel cost savings calculations based on usage hours and distance traveled to show the payback period for the added costs of Andy Bearing and Jet technologies for different vehicle types.
Andy technology automotive
1. Andy Transport Technology proposes new engine and bearing designs that can double or triple speed while reducing fuel consumption by 1/3 for the same ton-horsepower output in automotive, rail, ship, jet, and missile transport.
2. The new Andy Engine design uses a modified slider crank mechanism to generate 3 times the torque of a conventional engine for the same changes in pressure-volume, allowing it to develop the same power in 1/3 the volume or 300% power in the same volume while consuming the same fuel.
3. The Andy Bearing fits below non-drive wheels to reduce rolling friction and drag, potentially doubling vehicle speed when taking up 50% of the load.
Usa trade potential
This document identifies potential areas for international business partnerships and transportation technologies with high returns. It outlines opportunities in areas like automotive, bullet trains, cargo and container ships, ferries, oil tankers, gas platforms, and jet technologies that can operate at speeds from 1200 to 3600 km/h. It also discusses opportunities for all types of thermal power plants that do not require boilers or turbines and can use various fuels. The document claims these "Andy technologies" can reduce fuel use and emissions by 33% for the same power output. Global investments in these technologies could yield $15 trillion annually in returns while demonstrating technologies with a $2 million investment.
Sea car data1
The document contains technical specifications for two sea car prototypes developed by Delhi Firm Data Andy. The first prototype weighs 10 tons, can carry 40 passengers at 600 kmph with 330 horsepower at a cost of 1.2 Cr Rs. The second larger prototype weighs 100 tons, can carry 200 passengers at 600 kmph with 50 horsepower at a cost of 5 Cr Rs. Both were developed by lead engineer Muthukal Andy Appan with a technical demonstration of the first prototype in Chennai.
Fpso. 10 tips for econo fpso1
The document provides 10 tips for creating an economical FPSO (floating production storage and offloading vessel). The tips include splitting the FPSO into a drillship and FSO to reduce capital costs, using an Andy Rotary Engine to power the vessel and reduce operating costs associated with fuel, implementing proper staffing and management, adopting efficient technologies, and aiming for a 20% internal rate of return at $50 per barrel of oil to ensure the project's viability. By following these tips, the document estimates that $108 million in capital costs could be saved, covering ongoing operating expenses.
Mechanical engineering services offered
This document describes mechanical engineering design services offered by Andy Engine, Andy Bearing, and Jet that enable low carbon technologies. Key points include:
- Andy Technology allows all transports and power plants to use 1/3 the fuel and emit 33-66% less carbon emissions for the same output.
- For transports, this means 6 times the fuel efficiency, 16.7% lower carbon emissions per km or ton-km carried. Automotive vehicles could achieve 60 kmpl and trucks 25 kmpl.
- For power plants, fuel and carbon emissions would be reduced by 33% per MW generated for all fuel types including coal, crude, LNG and biofuels.
- Investment is invited for
Mechanical engineering services offered
This document describes mechanical engineering design services offered by Andy Engine, Andy Bearing, and Jet that enable low carbon technologies. Key points include:
- Andy Technology allows all transports and power plants to use 1/3 the fuel and emit 33-66% less carbon emissions for the same output.
- For transports, this means 6 times the fuel efficiency, 16.7% lower carbon emissions per km or ton-km carried. Automotive vehicles could achieve 60 kmpl and trucks 25 kmpl.
- For power plants, fuel and carbon emissions would be reduced by 33% per MW generated for all fuel types including coal, crude, LNG and biofuels.
- Investment is invited for
Civil engineering services offerd for business
This document lists civil engineering design services offered such as mega structures like towers over 1000m tall and wheel towers 333m in diameter, float bridges from 300m to 30km long, and over bridges with spans from 1km to 3km. Other services include designing hangers over 1000m x 1000m that are 20m to 200m high, pre-cast concrete roads from 8m to 52m wide and 150mm thick, and burnt brick walls and floors/ceilings using local soil and wood without cement or steel. The services are offered by Muthukal Andy Appan, a 50-year expert in civil engineering from India.
New multi vista transport roi, royalty1
The document introduces the Andy Rotary Engine, a new multi-VISTA technology that can burn all fuels with 1/3 the fuel and volume of traditional engines to produce the same horsepower. The Andy Engine has no boiler or turbine and is suitable to replace internal and external combustion engines in automotive, rail, ship, and power plant applications. When combined with Andy Bearings and Jets, the technology allows vehicles and machines to operate at double the speed for the same ton-horsepower using 1/3 the fuel and producing 33% less CO2 emissions. Tables show sample vehicle and machine designs using the Andy technology that achieve 6 times the fuel efficiency and double the return on investment compared to traditional designs.
Low carbon technology flower ship, missile, g train
Low carbon transport technologies can achieve significant reductions in fuel consumption and carbon emissions across various modes of transport including automotive, rail, ship, and aircraft. Andy Technology's rotary engine and bearing designs can double speeds while reducing fuel usage by one-third for the same power output. Initial analysis shows technologies can achieve fuel efficiency improvements of up to 6 times for automotive and reductions in carbon emissions of 16.7% for transport and 33% for power plants on average. Widespread adoption could yield very high returns on investment of 50% to over 2400% depending on the application.
Andy ship, feryy, vlcc, container
This document discusses new engine and bearing designs from Andy Shipping that can significantly reduce fuel consumption and increase the speed and efficiency of large vessels like ships, ferries, and oil tankers. The key points are:
1) Andy Shipping's new engine design can achieve the same horsepower as traditional engines while using only one-third of the fuel, reducing fuel costs and carbon emissions substantially.
2) New bearing and jet designs reduce drag and increase top speeds, allowing vessels to travel at triple their normal speed while using the same horsepower.
3) Financial analysis shows the return on investment for ships using Andy Shipping's designs could be 2400% for ships and 3200% for ferries, as fuel
Andy rail mono, bullet, land-sea craft1
Three sentences summarizing the key details:
The document describes Andy Rail, a new transportation system designed by M.A. Appan that can operate on both rail and land at speeds up to 600 kmph on rail and 820 kmph on land using the same horsepower, with tracks ranging from 2.5 to 50 meters long. It provides comparisons showing Andy Rail uses 1/3 the fuel and has 9 times greater fuel efficiency than current systems for the same tonnage and horsepower while carrying more weight and traveling at triple the speed. The increased efficiency is achieved through reductions in rolling friction at wheels, drag, and pressure at the nose.
Royalty on profit by transport
Andy Design Transport provides innovative transport solutions across land, sea, and sky. Their technologies can achieve double the speed for the same horsepower or use 1/3 the fuel for the same power output. Their engines and systems produce 6 times the fuel efficiency (kmpl) and 16.67% less carbon emissions (CO2e) compared to conventional options. Royalty fees are paid to Andy Design Transport based on a percentage of the annual profit for each factory implementing their technologies.
Royalty on profit by transport
Andy Design Transport provides innovative transport solutions across land, sea, and sky. Their technologies can achieve double the speed or hauling capacity for the same horsepower compared to traditional options, while emitting only 1/6th the carbon dioxide. The company, led by expert Muthukal Andy Appan, has applications for automotive, rail, shipping, and aerospace vehicles including jets, missiles, and rockets. Andy Design Transport's systems are licensed through royalty agreements based on factory profits and can deliver significant cost savings as well as emissions reductions.
Epower presentation
Venture Capital Fund for Technology Demonstration:
£ 5.0 mn 2 yrs at Johor-Bahru, Malaysia.
Andy Rotary Engine: 12 hp/100cc;1500hp/12L;1.5mnhp/12kL
All Fuels are burnt. Fit for Automotive, Rail, Ship, Jet, Missile
1.Aero Jet Engine 1.5 m dia Propeller, 60 cm dia, 20 cm long,
Andy Rotary Engine. 3000 hp, No compressor, No turbine.
STOSL, VTOL 180 deg tilt able engines-2 no.Tail engine-1 no
2.Truck 15 T, 240 hp, 200 kmph, 30 kmpl, 77.5 co2e g/km
3.Truck 30 T, 240 hp, 100 kmph, 15 kmpl, 155 co2e g/km
4.Ship 100 T, 1200hp, 330 knt,...15 kmpl, 1.55 Co2e g/t-km
5.Yard, machine tools, help, consumables etc
niraima1 at gmail com
More from google (20)
Andy technology renewable energy. no ghge. 120 ppm
Andy technology renewable energy. no ghge. 120 ppm
Low carbon technology flower ship, missile, g train
Low carbon technology flower ship, missile, g train
Recently uploaded
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
For International shipping and maritime laws all wood must contain the ISPM 15 Stamp. Here is how and why.
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
this notes have been created
by Eric36 at nyamata ttc
after readings
pe book for y2sme .
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Recycled Concrete Aggregate in Construction Part II
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Bigdata of technology
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Modelagem de um CSTR com reação endotermica.pdf
Modelagem em função de transferencia. CSTR não-linear.
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaIron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology towards Sustainable Steelmaking
Recently uploaded (20)
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Recycled Concrete Aggregate in Construction Part II
Recycled Concrete Aggregate in Construction Part II
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Andy rail mono, bullet, land-sea craft1
- 1. ANDY RAIL- MONO, BULLET, LAND-SEA ON RAIL - 600 KMPH , ON GROUND- NO RAIL - 820 KMPH for SAME TON-HP TRACK : 2.5 Mt to 50 Mt in LAND SPEED : 100 to 1200 KMPH WEIGHT : 1000 T to 10,000 T POWER: 12,500 HP/1000 T/600 kmph TON-KMPL = 1350 M ANDY APPAN, M E 45 Yrs EXPERT, India
- 2. DESIGN COMPARED for SAME TON-HP ITEMS NOW ANDY WEIGHT 1000 T 1000 T SPEED 100 300 kmph HP 6250 6250 VOLUME 156 52 Lit FUEL 625 210 Lit/Hr KMPL 0.16 1.43 [9 Times] M A APPAN, M E
- 3. INV ROI ROYALTY . Mn$ % Mn$/yr . 2000 620 100 on RAIL 5000 1600 200 Land-Sea . ANDY DESIGN : TRIPLE SPEED, 1/3 FUEL for SAME TON-HP by REDUCED ROLLING FRICTION at WHEELS, DRAG,DOZE at NOSE. M A APPAN, M E