LOW-COST AUXILIARY POWER UNIT TO BE EXHIBITED BY TATA MOTORS EUROPEAN TECHNICAL CENTRE INTEGRATED INTO AN INNOVATIVE RANGE EXTENDER TRAILER CONCEPT FROM EP TENDER
LOW-COST AUXILIARY POWER UNIT TO BE EXHIBITED BY TATA MOTORS EUROPEAN TECHNICAL CENTRE INTEGRATED INTO AN INNOVATIVE RANGE EXTENDER TRAILER CONCEPT FROM EP TENDER
Project report on wireless based traffic control for emergency vehicleNeeraj Lohani
This project report is based on wireless based traffic control for emergency vehicle. In which we use the RF receiver and transmitter with an encoder and decoder module.
Implementation of anti-collision train prototype based on arduino microcontro...IJAAS Team
Because the electrical train become a popular mode and Eco-Friendly of transport in largest cities in the world in our day life and due to increase in the train accidents. In this paper a train collision avoidance system is designed and implemented using Arduino NANO and an ultrasonic sensor. A prototype is used to explain the system function using; two train samples on single track. The ultrasonic sensor is connected to the Arduino NANO to transmit the measured distance to the microcontroller and make the decision to stop the train. The ultrasonic sensor on both trains from the front end and continually measures the distance between them and when they reach the decided distance a signal to the trains engines will slow down or stop both trains to avoid a collision while when the ultrasonic sensors from the rear-end continually measure the distance between them and when it reaches the decided distance a signal to the train engine will slow down and stop the first train to avoid a collision.
V2V communication systems communicates with the approaching vehicle and avoids the accident by alerting the driver and often it drives away the vehicle if the driver fails to stop it. V2I communication system communicates with the server in the road and reduces the traffic taking place in the road.
In India, as the fuel cost continues to rise, railway transport plays an important role. Although there are, so many
options of transportation are available like flights, trains, buses etc but most of the people prefer trains only as it
is cost effective and comfortable way of travelling and hence in today’s world railway becomes the lifeline of
India. When anybody goes through the daily news, they come across many accidents which are related to
railroad. So there must be good railway safety for the people as the rail accidents are often dangerous in terms of
the severity and death etc, when compared with the other transportation. There are several reasons present for
railroad related accidents but the major reason is cracks in rails. It is the main cause of railway derailments and
has the capacity to induce major damage to economy of the world. Therefore more efforts are necessary for
achieving the good rail safety. This system introduced a method for rail crack detection. The proposed system is
LED-LDR and Arduino based rail track detection scheme. It is cost effective and simple way of monitoring the
condition of the rails on a continual basis for the improving the railway safety which consists of GSM module
and Encoder.
Its work like a cell phone recharge phone if recharge is over electricity gone after that we need to recharge acount main benift is that we can oprate it from any where to the world
This paper suggests a rail crack inspection using low cost sensors and Arduino
Duemilanove microcontroller board. The present inspection systems are more bulky, expensive and
have slow response time. Arduino Duemilanove microcontroller board has 14 digital input/output
pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator. The
Arduino Duemilanove can be programmed with the Arduino software and the major advantage of
using these boards is that they can program the microcontroller through the ICSP (In-Circuit Serial
Programming) header. The aforementioned functionality has been achieved by interfacing the GSM
module, GPS module and LED-LDR arrangement with a microcontroller. In this system the GPS
receives the signal and gives the current latitude and longitude of the crack. By using GSM the user
is able to receive the information through subscribed services and users can often continue to use
their mobile phones when they are traveling, hence GSM is also implemented in the present design.
The present design has a vast application in hardware industries like structural health monitoring
(SHM) of critical aircraft components, pipe, welding process etc .The sensors were able to detect
crack by LDRs and due to its flexible design it could be used as an embedded sensor for online and
unmanned monitoring systems.
Project report on wireless based traffic control for emergency vehicleNeeraj Lohani
This project report is based on wireless based traffic control for emergency vehicle. In which we use the RF receiver and transmitter with an encoder and decoder module.
Implementation of anti-collision train prototype based on arduino microcontro...IJAAS Team
Because the electrical train become a popular mode and Eco-Friendly of transport in largest cities in the world in our day life and due to increase in the train accidents. In this paper a train collision avoidance system is designed and implemented using Arduino NANO and an ultrasonic sensor. A prototype is used to explain the system function using; two train samples on single track. The ultrasonic sensor is connected to the Arduino NANO to transmit the measured distance to the microcontroller and make the decision to stop the train. The ultrasonic sensor on both trains from the front end and continually measures the distance between them and when they reach the decided distance a signal to the trains engines will slow down or stop both trains to avoid a collision while when the ultrasonic sensors from the rear-end continually measure the distance between them and when it reaches the decided distance a signal to the train engine will slow down and stop the first train to avoid a collision.
V2V communication systems communicates with the approaching vehicle and avoids the accident by alerting the driver and often it drives away the vehicle if the driver fails to stop it. V2I communication system communicates with the server in the road and reduces the traffic taking place in the road.
In India, as the fuel cost continues to rise, railway transport plays an important role. Although there are, so many
options of transportation are available like flights, trains, buses etc but most of the people prefer trains only as it
is cost effective and comfortable way of travelling and hence in today’s world railway becomes the lifeline of
India. When anybody goes through the daily news, they come across many accidents which are related to
railroad. So there must be good railway safety for the people as the rail accidents are often dangerous in terms of
the severity and death etc, when compared with the other transportation. There are several reasons present for
railroad related accidents but the major reason is cracks in rails. It is the main cause of railway derailments and
has the capacity to induce major damage to economy of the world. Therefore more efforts are necessary for
achieving the good rail safety. This system introduced a method for rail crack detection. The proposed system is
LED-LDR and Arduino based rail track detection scheme. It is cost effective and simple way of monitoring the
condition of the rails on a continual basis for the improving the railway safety which consists of GSM module
and Encoder.
Its work like a cell phone recharge phone if recharge is over electricity gone after that we need to recharge acount main benift is that we can oprate it from any where to the world
This paper suggests a rail crack inspection using low cost sensors and Arduino
Duemilanove microcontroller board. The present inspection systems are more bulky, expensive and
have slow response time. Arduino Duemilanove microcontroller board has 14 digital input/output
pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator. The
Arduino Duemilanove can be programmed with the Arduino software and the major advantage of
using these boards is that they can program the microcontroller through the ICSP (In-Circuit Serial
Programming) header. The aforementioned functionality has been achieved by interfacing the GSM
module, GPS module and LED-LDR arrangement with a microcontroller. In this system the GPS
receives the signal and gives the current latitude and longitude of the crack. By using GSM the user
is able to receive the information through subscribed services and users can often continue to use
their mobile phones when they are traveling, hence GSM is also implemented in the present design.
The present design has a vast application in hardware industries like structural health monitoring
(SHM) of critical aircraft components, pipe, welding process etc .The sensors were able to detect
crack by LDRs and due to its flexible design it could be used as an embedded sensor for online and
unmanned monitoring systems.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Democratizing Fuzzing at Scale by Abhishek Aryaabh.arya
Presented at NUS: Fuzzing and Software Security Summer School 2024
This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
1. Ambulance Drone Support System (ADSS)
Abstract:--
Thousands of people die because of Ambulance Delays. The time taken by ambulance to reach a patzent
depends a lot on the route, distance and the traffic en route . The helicopter support is working in certain places, but
requires a lot of money, and open space for landing. What if there was a way to support the patient to survive long enough
for the ambulance to arrive. The Ambulance Drone Support System is a way by which we can support a patient long
enough for the ambulance to come and take matters in hand from there.
Quad-Copter Configurations
2. [ Electromech Engineering Services , Nashik www.goelectromech.in
Fot this project Contact @ 9421390933,]
Keywords-
Leading project maker in Nashik, Electrical project in nashik goelectromeh.in, Electronic
project in nashik goelectromeh.in, computer project in nashik, Electrical project engineering
project in nashik goelectromeh.in, Electronic project engineering project in nashik
goelectromeh.in, Computer project engineering project in nashik goelectromeh.in,
Electrical project Diploma project in nashik goelectromeh.in, Electronic project Diploma
project in nashik goelectromeh.in, Computer project Diploma project in nashik goelectromeh.in.
![[ Electromech Engineering Services , Nashik www.goelectromech.in
Fot this project Contact @ 9421390933,]
Keywords-
Leading project maker in Nashik, Electrical project in nashik goelectromeh.in, Electronic
project in nashik goelectromeh.in, computer project in nashik, Electrical project engineering
project in nashik goelectromeh.in, Electronic project engineering project in nashik
goelectromeh.in, Computer project engineering project in nashik goelectromeh.in,
Electrical project Diploma project in nashik goelectromeh.in, Electronic project Diploma
project in nashik goelectromeh.in, Computer project Diploma project in nashik goelectromeh.in.](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)