Filtration technology is widely used but additive manufacturing has not yet been applied to filter production. The document proposes developing additive technologies for printing filters from metals and ceramics with controlled porosity. This would allow for more complex filter designs not possible with traditional methods. The plan involves developing specialized 3D printers then working with industrial partners to produce and test large filters.
Wire Mesh Filter elements, their construction materials and the need of filters are discussed to describe the significance of filters in the industries
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity.
Plastics distributors and fabricators have a wide array of abilities. Emco Industrial Plastics and displays shares a "taste" of some of the services and capabilities offered in this slide presentation. Click on the company logo on the bottom of each page to learn more about each topic
Metallic filters can be manufactured through powder metallurgy techniques like cold isostatic pressing and sintering metal powders. Common materials used include stainless steel, titanium, and aluminum alloys. Metallic filters have applications in filtration, heat exchange, sound absorption, energy absorption, and medical implants due to their uniform porosity, mechanical strength, and corrosion resistance. Key advantages over solid metals include lower density, higher surface area, and ability to form complex 3D shapes.
This document provides information on mist elimination solutions from GTC Technology. It discusses different types of mist eliminators including wire mesh, vane, and fiber bed mist eliminators. Wire mesh mist eliminators use layers of crimped metal wire to capture liquid droplets through inertia impaction. Vane mist eliminators use parallel vane profiles to change the gas direction and capture droplets. Fiber bed mist eliminators are suitable for capturing extremely fine submicron particles using diffusion. The document also discusses design considerations, materials of construction, applications and worldwide locations of GTC Technology.
PATT Filtration produces polymer filtration systems to remove contaminants from molten plastics. Their ROTARY III Constant Pressure Drop Continuous filtration system uses a revolving disk with screens to filter plastics while maintaining constant pressure. PATT emphasizes product quality, customer satisfaction, and custom engineering solutions. They have become a leader in polymer filtration through ongoing research and adapting their technologies to customers' specific needs.
A spot filter is a compact and small bag filter that is designed for the removal of dust from conveyors, elevators, and bunkers. Depending on the type of equipment, a spot filter can be installed horizontally or vertically.
This dust removal filter works by using a series of filter bags that are placed inside the unit. As air and dust enter the spot filter, the filter bags capture the dust particles and prevent them from being released into the surrounding environment. The clean air is then released back into the equipment or into the atmosphere. It means it is extremely efficient at capturing dust and other particulate matter.
Another advantage of spot filters is that they are very compact and can be easily installed in tight spaces. This makes them a great choice for use in conveyors, elevators, and bunkers, where space is often at a premium. It can also be used with a variety of pneumatic conveying systems to remove dust and other particulate matter from the conveying stream. These systems can include both pressure and vacuum systems, as well as dilute phase conveying systems and dense phase conveying systems.
Stratgem Pune, India, can provide you with a complete air pollution control system or single component equipment, as well as comprehensive services like field service, start-up service, and spare parts.
Wire Mesh Filter elements, their construction materials and the need of filters are discussed to describe the significance of filters in the industries
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity.
Plastics distributors and fabricators have a wide array of abilities. Emco Industrial Plastics and displays shares a "taste" of some of the services and capabilities offered in this slide presentation. Click on the company logo on the bottom of each page to learn more about each topic
Metallic filters can be manufactured through powder metallurgy techniques like cold isostatic pressing and sintering metal powders. Common materials used include stainless steel, titanium, and aluminum alloys. Metallic filters have applications in filtration, heat exchange, sound absorption, energy absorption, and medical implants due to their uniform porosity, mechanical strength, and corrosion resistance. Key advantages over solid metals include lower density, higher surface area, and ability to form complex 3D shapes.
This document provides information on mist elimination solutions from GTC Technology. It discusses different types of mist eliminators including wire mesh, vane, and fiber bed mist eliminators. Wire mesh mist eliminators use layers of crimped metal wire to capture liquid droplets through inertia impaction. Vane mist eliminators use parallel vane profiles to change the gas direction and capture droplets. Fiber bed mist eliminators are suitable for capturing extremely fine submicron particles using diffusion. The document also discusses design considerations, materials of construction, applications and worldwide locations of GTC Technology.
PATT Filtration produces polymer filtration systems to remove contaminants from molten plastics. Their ROTARY III Constant Pressure Drop Continuous filtration system uses a revolving disk with screens to filter plastics while maintaining constant pressure. PATT emphasizes product quality, customer satisfaction, and custom engineering solutions. They have become a leader in polymer filtration through ongoing research and adapting their technologies to customers' specific needs.
A spot filter is a compact and small bag filter that is designed for the removal of dust from conveyors, elevators, and bunkers. Depending on the type of equipment, a spot filter can be installed horizontally or vertically.
This dust removal filter works by using a series of filter bags that are placed inside the unit. As air and dust enter the spot filter, the filter bags capture the dust particles and prevent them from being released into the surrounding environment. The clean air is then released back into the equipment or into the atmosphere. It means it is extremely efficient at capturing dust and other particulate matter.
Another advantage of spot filters is that they are very compact and can be easily installed in tight spaces. This makes them a great choice for use in conveyors, elevators, and bunkers, where space is often at a premium. It can also be used with a variety of pneumatic conveying systems to remove dust and other particulate matter from the conveying stream. These systems can include both pressure and vacuum systems, as well as dilute phase conveying systems and dense phase conveying systems.
Stratgem Pune, India, can provide you with a complete air pollution control system or single component equipment, as well as comprehensive services like field service, start-up service, and spare parts.
This document discusses filtration and the use of fibres and fabrics for filtration. It begins by defining filtration as the separation of solids from fluids using a medium that allows only the fluid to pass. It then discusses the principles of filtration, including factors that impact efficiency like porosity and permeability. Finally, it provides examples of applications for textile filtration in areas like vacuum cleaners, medical uses, power stations, sewage disposal, water filtration and geotextiles.
The document discusses a new filter technology called Reinforced Media Optimization (RMO) developed by RoboVent for their Endurex line of filters which widens pleat spacing and adds internal support structures to maximize media surface area and filtration efficiency while reducing pressure drop for longer filter life. Several Endurex filter models are described that utilize different media types and coatings suited for various applications like welding fumes, metalworking dust, and abrasive blasting. The document promotes the benefits of RMO technology and Endurex filters for collecting dust, fumes, smoke and other pollutants from manufacturing processes.
A spot filter is a compact and small bag filter that is designed for the removal of dust from conveyors, elevators, and bunkers. Depending on the type of equipment, a spot filter can be installed horizontally or vertically. This dust removal filter works by using a series of filter bags that are placed inside the unit. As air and dust enter the spot filter, the filter bags capture the dust particles and prevent them from being released into the surrounding environment. The clean air is then released back into the equipment or into the atmosphere. It means it is extremely efficient at capturing dust and other particulate matter. For more detailed information Please visit www.stratgemprojects.com/spotfilter.html . Stratgem develops and manufactures Spot Filter, a dust remover, based on the needs and specifications of the customer. To know more please contact us www.stratgemprojects.com/contactus.html
The document provides an overview of 3D printing including its definition, history, types, industries that use it, and advantages/disadvantages. It defines 3D printing as a process that creates 3D objects by laying down successive layers of material under computer control. The history section notes that Hideo Kodama developed early 3D printing in 1981 and Chuck Hull invented the first 3D printer in 1987 using stereolithography. The document then describes various types of 3D printing processes and industries where it is used like aerospace, automotive, and medical.
The document discusses filtration processes and provides information about PT. LEITER INDONESIA, a company that offers process filtration solutions using fabrics from Sefar. It summarizes Sefar's offerings for various types of filtration equipment, including vacuum belt filters, rotary drum filters, rotary disc filters, belt press filters, filter presses, horizontal disc filters, leaf filters, tube presses, and multi-element candle filters. The benefits of Sefar's fabrics for these applications include optimized chemical resistance, increased filtration efficiency, low maintenance costs, and long service life.
This document provides information about Shenzhen Esocoo Industrial Co., Ltd., a manufacturer of SMT consumables established in 2004. It specializes in producing stencil wiping rolls, SMT splice tape, purification products, and anti-static products. The company aims to provide high-quality products at the best price along with professional technical support and excellent after-sales service. It has obtained ISO9001:2008 and RoHS product certifications to ensure quality. The document also describes the production and testing of stencil wiping paper used in circuit board manufacturing to clean stencils and remove solder paste residues thoroughly while preventing damage.
This document discusses the use of textiles in filtration applications. It begins with an introduction to filtration principles and processes. It then focuses on how various textile fibers and fabric constructions, such as woven, nonwoven and knitted, can be used as filter media. Specific applications where textiles are used for filtration are described, including vacuum cleaners, medical devices, power plants, water purification and more. The document discusses factors that influence filtration performance, such as fiber type, fabric properties and finishing treatments. It also provides examples of how textiles can be applied to purify air and water. In summary, the document outlines the role of textiles in filtration and provides details on textile materials and constructions suitable for various filtration
Powertech Pollution Controls Pvt. Ltd. is an ISO 9001:2008 certified company that designs and manufactures electrostatic air filters under the brand names Fumekiller and Dustkiller. These high efficiency filters can capture particles as small as 0.01 microns and are used by many major companies in India. The company offers a wide range of electrostatic filter modules of different sizes to suit various air flow rate requirements.
The document discusses computer numerical control (CNC) fabric cutting machines. It provides details on how CNC uses numerical values fed into the machine from a storage device to control movements. This allows for precise and predictable cutting of fabrics. Key components of CNC fabric cutters discussed include the bristle bed, vacuum system, perforated paper, and G-code programming. Advantages listed are high speeds, accuracy, and ability to cut complex patterns efficiently. Challenges include high initial costs and needing skilled operators. Popular brands of CNC cutters mentioned are Gerber, Eastman, Kuris, and Topcut Bullmer.
The document discusses various advanced construction techniques including 3D printing, photo catalytic concrete, self-healing concrete, zero cement concrete, hemp lime, wood-glass epoxy composites, and bamboo. 3D printing allows for complex components and entire buildings to be printed in concrete in a time and cost efficient manner. Photo catalytic concrete uses titanium dioxide to break down pollutants. Self-healing concrete can automatically repair cracks without human intervention. Zero cement concrete is an environmentally friendly alternative that uses waste materials like fly ash as binders instead of cement.
The document discusses various advanced construction techniques including 3D printing, photo catalytic concrete, self-healing concrete, zero cement concrete, hemp lime, wood-glass epoxy composites, and bamboo. 3D printing allows for complex components and entire buildings to be printed in concrete in a time and cost efficient manner. Photo catalytic concrete uses titanium dioxide to break down pollutants. Self-healing concrete can automatically repair cracks without human intervention. Zero cement concrete is an environmentally friendly alternative that uses waste materials like fly ash instead of cement.
Society has benefited tremendously from the development and utilization of mechanical devices which are implanted inside the body and are used to replace bones and joints, increase blood flow, and even measure blood chemistry. To further enhance the performance of these devices, the application of thin films to the external surfaces is an ongoing research and development interest at many companies. Engineers have a choice of a variety of technologies to apply these liquid coatings to these often complex surfaces ranging from vacuum technology to direct liquid application. The decision on what technology to use is a function of the liquid precursor used, the mechanism of coating formation and the geometry of the object to be coated. A critical quality and process control criterion is the consistency of the coating on the surface. Fluid delivery technology can play an important part in maintaining coating consistency. Pumps and liquid flow controllers are technologies being used today. For vapor coating processes, liquid vaporization technology is a critical link in the fluid delivery system. New flow and vaporization technology is available that can be applied to fluid delivery to improve the application of medical device coatings.
Six injection molding processing technologies for plastic products for home a...JasmineHL
This document discusses six plastic processing technologies used for home appliance plastic products: 1) Precision injection molding which allows for high precision and repeatability, 2) Rapid prototyping technology which allows for small batches without a mold, 3) Melt core injection which uses a core that melts and flows out to form a cavity, 4) Gas-assisted/water-assisted injection which injects gas or water during injection for a sandwich structure, 5) Electromagnetic dynamic injection which causes axial screw reciprocation for a more compact structure, and 6) Film injection which adheres a printed film to the surface. It also notes that home appliances require many molds and that mold technologies are developing to meet technical requirements.
MSE-4105-Chapter-2-Manufacturing of Composites.pdfShamahaKhondoker
This document discusses various processing techniques and manufacturing processes for fiber-reinforced polymer matrix composites. It describes structural, semi-structural, and non-structural processing techniques based on fiber alignment. Various manufacturing processes are then discussed, including hand lay-up, pultrusion, resin transfer molding, filament winding, compression molding, injection molding, blow molding, and infiltration. Key factors affecting the selection of manufacturing processes are identified as production rate, cost, part requirements, geometry, and material.
TSE Two Square Ecotechnologies provides air pollution control and management systems for industrial applications. It designs and manufactures systems like dust extraction, fume scrubbing, and ventilation using fabric filter bag houses. Bag houses remove dust from industrial processes in sectors like cement, steel, and mining. TSE bag houses use pulse jet or reverse air cleaning and come in online, offline, and insertable configurations for applications across industries. TSE has successfully installed systems for many Indian companies.
This presentation discusses textile filtration. It defines filtration as separating particles from a dispersing fluid using porous media. Various types of textile filters are described, including flat, deep, pleated, pocket, cartridge, drum, and bag filters. Key variables that impact filtration like filter material properties, particle characteristics, and process parameters are outlined. The principles of filtration such as interception and diffusion are also summarized. Applications of textile filtration in areas like vacuums, medicine, power plants, and water treatment are highlighted. Common fibers used in filtration media include natural, artificial, and synthetic options.
This presentation provides an overview of nonwoven materials, including their definition, properties, production processes, bonding methods, finishing treatments, and applications. Nonwovens are sheets of fibers or filaments that are formed into a web and bonded together without weaving or knitting. They are made through processes like drylaying, spunlaying, meltblowing, and wetlaying. Common bonding methods are chemical, thermal, and mechanical. Nonwovens are used widely in hygiene products, agriculture, filtration, medical products, and packaging due to their desirable properties such as absorbency, strength, and breathability.
This document discusses various coating methods used in industries. It begins by outlining the basic steps in a coating process, which includes preparing the coating solution, loading the substrate, applying the coating, drying, and winding. It then describes different coating methods like reverse roll, gravure, slot die, and air knife. Factors to consider when selecting a coating method include the substrate, solution properties, coverage needs, and production volume. The document also covers topics like covered rollers, considerations for selecting roll coating methods, and how roll coaters work.
Filtration is a process used to separate solids from liquids by passing the mixture through a porous medium that retains the solids. There are two main types - surface filtration and depth filtration. Filtration finds applications in producing sterile products, pharmaceuticals, and wastewater treatment. Key factors that influence filtration include properties of the solid, liquid, and slurry as well as temperature. Selection of the appropriate filter depends on the fluid properties, solid properties, concentration, flow rate, and sterilization needs.
This document discusses filtration and the use of fibres and fabrics for filtration. It begins by defining filtration as the separation of solids from fluids using a medium that allows only the fluid to pass. It then discusses the principles of filtration, including factors that impact efficiency like porosity and permeability. Finally, it provides examples of applications for textile filtration in areas like vacuum cleaners, medical uses, power stations, sewage disposal, water filtration and geotextiles.
The document discusses a new filter technology called Reinforced Media Optimization (RMO) developed by RoboVent for their Endurex line of filters which widens pleat spacing and adds internal support structures to maximize media surface area and filtration efficiency while reducing pressure drop for longer filter life. Several Endurex filter models are described that utilize different media types and coatings suited for various applications like welding fumes, metalworking dust, and abrasive blasting. The document promotes the benefits of RMO technology and Endurex filters for collecting dust, fumes, smoke and other pollutants from manufacturing processes.
A spot filter is a compact and small bag filter that is designed for the removal of dust from conveyors, elevators, and bunkers. Depending on the type of equipment, a spot filter can be installed horizontally or vertically. This dust removal filter works by using a series of filter bags that are placed inside the unit. As air and dust enter the spot filter, the filter bags capture the dust particles and prevent them from being released into the surrounding environment. The clean air is then released back into the equipment or into the atmosphere. It means it is extremely efficient at capturing dust and other particulate matter. For more detailed information Please visit www.stratgemprojects.com/spotfilter.html . Stratgem develops and manufactures Spot Filter, a dust remover, based on the needs and specifications of the customer. To know more please contact us www.stratgemprojects.com/contactus.html
The document provides an overview of 3D printing including its definition, history, types, industries that use it, and advantages/disadvantages. It defines 3D printing as a process that creates 3D objects by laying down successive layers of material under computer control. The history section notes that Hideo Kodama developed early 3D printing in 1981 and Chuck Hull invented the first 3D printer in 1987 using stereolithography. The document then describes various types of 3D printing processes and industries where it is used like aerospace, automotive, and medical.
The document discusses filtration processes and provides information about PT. LEITER INDONESIA, a company that offers process filtration solutions using fabrics from Sefar. It summarizes Sefar's offerings for various types of filtration equipment, including vacuum belt filters, rotary drum filters, rotary disc filters, belt press filters, filter presses, horizontal disc filters, leaf filters, tube presses, and multi-element candle filters. The benefits of Sefar's fabrics for these applications include optimized chemical resistance, increased filtration efficiency, low maintenance costs, and long service life.
This document provides information about Shenzhen Esocoo Industrial Co., Ltd., a manufacturer of SMT consumables established in 2004. It specializes in producing stencil wiping rolls, SMT splice tape, purification products, and anti-static products. The company aims to provide high-quality products at the best price along with professional technical support and excellent after-sales service. It has obtained ISO9001:2008 and RoHS product certifications to ensure quality. The document also describes the production and testing of stencil wiping paper used in circuit board manufacturing to clean stencils and remove solder paste residues thoroughly while preventing damage.
This document discusses the use of textiles in filtration applications. It begins with an introduction to filtration principles and processes. It then focuses on how various textile fibers and fabric constructions, such as woven, nonwoven and knitted, can be used as filter media. Specific applications where textiles are used for filtration are described, including vacuum cleaners, medical devices, power plants, water purification and more. The document discusses factors that influence filtration performance, such as fiber type, fabric properties and finishing treatments. It also provides examples of how textiles can be applied to purify air and water. In summary, the document outlines the role of textiles in filtration and provides details on textile materials and constructions suitable for various filtration
Powertech Pollution Controls Pvt. Ltd. is an ISO 9001:2008 certified company that designs and manufactures electrostatic air filters under the brand names Fumekiller and Dustkiller. These high efficiency filters can capture particles as small as 0.01 microns and are used by many major companies in India. The company offers a wide range of electrostatic filter modules of different sizes to suit various air flow rate requirements.
The document discusses computer numerical control (CNC) fabric cutting machines. It provides details on how CNC uses numerical values fed into the machine from a storage device to control movements. This allows for precise and predictable cutting of fabrics. Key components of CNC fabric cutters discussed include the bristle bed, vacuum system, perforated paper, and G-code programming. Advantages listed are high speeds, accuracy, and ability to cut complex patterns efficiently. Challenges include high initial costs and needing skilled operators. Popular brands of CNC cutters mentioned are Gerber, Eastman, Kuris, and Topcut Bullmer.
The document discusses various advanced construction techniques including 3D printing, photo catalytic concrete, self-healing concrete, zero cement concrete, hemp lime, wood-glass epoxy composites, and bamboo. 3D printing allows for complex components and entire buildings to be printed in concrete in a time and cost efficient manner. Photo catalytic concrete uses titanium dioxide to break down pollutants. Self-healing concrete can automatically repair cracks without human intervention. Zero cement concrete is an environmentally friendly alternative that uses waste materials like fly ash as binders instead of cement.
The document discusses various advanced construction techniques including 3D printing, photo catalytic concrete, self-healing concrete, zero cement concrete, hemp lime, wood-glass epoxy composites, and bamboo. 3D printing allows for complex components and entire buildings to be printed in concrete in a time and cost efficient manner. Photo catalytic concrete uses titanium dioxide to break down pollutants. Self-healing concrete can automatically repair cracks without human intervention. Zero cement concrete is an environmentally friendly alternative that uses waste materials like fly ash instead of cement.
Society has benefited tremendously from the development and utilization of mechanical devices which are implanted inside the body and are used to replace bones and joints, increase blood flow, and even measure blood chemistry. To further enhance the performance of these devices, the application of thin films to the external surfaces is an ongoing research and development interest at many companies. Engineers have a choice of a variety of technologies to apply these liquid coatings to these often complex surfaces ranging from vacuum technology to direct liquid application. The decision on what technology to use is a function of the liquid precursor used, the mechanism of coating formation and the geometry of the object to be coated. A critical quality and process control criterion is the consistency of the coating on the surface. Fluid delivery technology can play an important part in maintaining coating consistency. Pumps and liquid flow controllers are technologies being used today. For vapor coating processes, liquid vaporization technology is a critical link in the fluid delivery system. New flow and vaporization technology is available that can be applied to fluid delivery to improve the application of medical device coatings.
Six injection molding processing technologies for plastic products for home a...JasmineHL
This document discusses six plastic processing technologies used for home appliance plastic products: 1) Precision injection molding which allows for high precision and repeatability, 2) Rapid prototyping technology which allows for small batches without a mold, 3) Melt core injection which uses a core that melts and flows out to form a cavity, 4) Gas-assisted/water-assisted injection which injects gas or water during injection for a sandwich structure, 5) Electromagnetic dynamic injection which causes axial screw reciprocation for a more compact structure, and 6) Film injection which adheres a printed film to the surface. It also notes that home appliances require many molds and that mold technologies are developing to meet technical requirements.
MSE-4105-Chapter-2-Manufacturing of Composites.pdfShamahaKhondoker
This document discusses various processing techniques and manufacturing processes for fiber-reinforced polymer matrix composites. It describes structural, semi-structural, and non-structural processing techniques based on fiber alignment. Various manufacturing processes are then discussed, including hand lay-up, pultrusion, resin transfer molding, filament winding, compression molding, injection molding, blow molding, and infiltration. Key factors affecting the selection of manufacturing processes are identified as production rate, cost, part requirements, geometry, and material.
TSE Two Square Ecotechnologies provides air pollution control and management systems for industrial applications. It designs and manufactures systems like dust extraction, fume scrubbing, and ventilation using fabric filter bag houses. Bag houses remove dust from industrial processes in sectors like cement, steel, and mining. TSE bag houses use pulse jet or reverse air cleaning and come in online, offline, and insertable configurations for applications across industries. TSE has successfully installed systems for many Indian companies.
This presentation discusses textile filtration. It defines filtration as separating particles from a dispersing fluid using porous media. Various types of textile filters are described, including flat, deep, pleated, pocket, cartridge, drum, and bag filters. Key variables that impact filtration like filter material properties, particle characteristics, and process parameters are outlined. The principles of filtration such as interception and diffusion are also summarized. Applications of textile filtration in areas like vacuums, medicine, power plants, and water treatment are highlighted. Common fibers used in filtration media include natural, artificial, and synthetic options.
This presentation provides an overview of nonwoven materials, including their definition, properties, production processes, bonding methods, finishing treatments, and applications. Nonwovens are sheets of fibers or filaments that are formed into a web and bonded together without weaving or knitting. They are made through processes like drylaying, spunlaying, meltblowing, and wetlaying. Common bonding methods are chemical, thermal, and mechanical. Nonwovens are used widely in hygiene products, agriculture, filtration, medical products, and packaging due to their desirable properties such as absorbency, strength, and breathability.
This document discusses various coating methods used in industries. It begins by outlining the basic steps in a coating process, which includes preparing the coating solution, loading the substrate, applying the coating, drying, and winding. It then describes different coating methods like reverse roll, gravure, slot die, and air knife. Factors to consider when selecting a coating method include the substrate, solution properties, coverage needs, and production volume. The document also covers topics like covered rollers, considerations for selecting roll coating methods, and how roll coaters work.
Filtration is a process used to separate solids from liquids by passing the mixture through a porous medium that retains the solids. There are two main types - surface filtration and depth filtration. Filtration finds applications in producing sterile products, pharmaceuticals, and wastewater treatment. Key factors that influence filtration include properties of the solid, liquid, and slurry as well as temperature. Selection of the appropriate filter depends on the fluid properties, solid properties, concentration, flow rate, and sterilization needs.
The document discusses different types of masks and respirators, their construction, materials, and standards. It describes face masks as having minimum requirements and not for medical use. Medical face masks are tested according to standards and intended to prevent transmission of particles/droplets. Respirators are designed to filter both solid particles and liquid droplets for personal protective equipment. They are subject to standards like EN 149 and have features like tight fitting and volume design for breathing. Modern masks and respirators use multilayer construction with layers serving purposes like outer protection, inner comfort, and electrostatic filtration.
Additive manufacturing is currently at a rapid growth stage. New processes and technologies are being created, the old ones are being optimized.
There are already many companies in the market that produce various 3D printers, develop software and print parts.
Some perceive additive technologies as technologies to create new types of machine-tools, others as independent technologies.
But the commercial success of additive technologies has already caused discussion of different approaches. We're talking about the type of architecture. It's a closed and open architecture of devices for additive technologies.
Does it make sense to use open architecture in this sphere of technology?
Fine Systems Technologies provides technology consulting services such as product and technology development, requirements analysis, design, and project support. They work with clients to develop new devices, technologies, and production processes. Their team of engineers, designers, and technology specialists can complement a client's internal development department or handle full product development. Services are tailored to each project and may include consultation, concept development, prototyping, small production runs, and integration of electronics, optics, and other components.
Компания «Тонкие системные технологии» проводит техническое и технологическое консультирование.
Если нужно создать устройство, технологию, установку – мы можем в этом помочь.
Если нет собственного отдела разработок – мы можем разработать для вас продукт или технологию.
Компания «Тонкие системные технологии» создана для работы с нестандартными проектами. В ситуации, когда нет типовых решений, при разработке технологии или устройства необходим специальный подход к работе с поставленными задачами.
Это работа над новыми продуктами и технологиями, новые рынки и бизнес-модели, проекты на стыке нескольких областей, переход от идеи к разработке и от разработки к производству.
Компания «Тонкие системные технологии» сформирована для работы с новыми нестандартными проектами. Это необходимо при разработке новых технологий и продуктов.
In XWS sources light is produced by plasma
which emits light due to the continuous
energy input from a laser (optical discharge).
These light sources have been
developed as a replacement of traditional
gas discharge lamps (Deuterium-,
Tungsten-, Xenon- lamps etc.) and LEDs.
Compared to these, XWS sources have a
wider spectral range and higher spectral
brightness. Moreover, the technology of
plasma light sources allows developing
units with specific characteristics which
match special customer applications.
XWS — плазменный широкополосный источник излучения с лазерной накачкойVladislav Troshin
XWS — плазменный широкополосный источник излучения с лазерной накачкой.
В источниках XWS излучение даёт плазма, светящаяся под действием непрерывного лазерного излучения (оптический разряд). Эти источники разработаны для замены традиционных газоразрядных ламп (ксеноновых, дейтериевых, ртутных) и светодиодов. По сравнению с ними XWS имеет более высокую яркость и расширенный спектральный диапазон. Кроме того, технология плазменных источников излучения позволяет разрабатывать устройства со специфическими характеристиками для решения особых задач пользователей.
The document describes the structure of DNA and RNA molecules at the nucleotide level. It shows the phosphate backbone and sugar-phosphate groups that make up the structure, with nitrogenous bases bonding between strands in the DNA double helix or within RNA. Various DNA and RNA sequences are displayed.
Essentials of Automations: Exploring Attributes & Automation ParametersSafe Software
Building automations in FME Flow can save time, money, and help businesses scale by eliminating data silos and providing data to stakeholders in real-time. One essential component to orchestrating complex automations is the use of attributes & automation parameters (both formerly known as “keys”). In fact, it’s unlikely you’ll ever build an Automation without using these components, but what exactly are they?
Attributes & automation parameters enable the automation author to pass data values from one automation component to the next. During this webinar, our FME Flow Specialists will cover leveraging the three types of these output attributes & parameters in FME Flow: Event, Custom, and Automation. As a bonus, they’ll also be making use of the Split-Merge Block functionality.
You’ll leave this webinar with a better understanding of how to maximize the potential of automations by making use of attributes & automation parameters, with the ultimate goal of setting your enterprise integration workflows up on autopilot.
The Microsoft 365 Migration Tutorial For Beginner.pptxoperationspcvita
This presentation will help you understand the power of Microsoft 365. However, we have mentioned every productivity app included in Office 365. Additionally, we have suggested the migration situation related to Office 365 and how we can help you.
You can also read: https://www.systoolsgroup.com/updates/office-365-tenant-to-tenant-migration-step-by-step-complete-guide/
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...DanBrown980551
This LF Energy webinar took place June 20, 2024. It featured:
-Alex Thornton, LF Energy
-Hallie Cramer, Google
-Daniel Roesler, UtilityAPI
-Henry Richardson, WattTime
In response to the urgency and scale required to effectively address climate change, open source solutions offer significant potential for driving innovation and progress. Currently, there is a growing demand for standardization and interoperability in energy data and modeling. Open source standards and specifications within the energy sector can also alleviate challenges associated with data fragmentation, transparency, and accessibility. At the same time, it is crucial to consider privacy and security concerns throughout the development of open source platforms.
This webinar will delve into the motivations behind establishing LF Energy’s Carbon Data Specification Consortium. It will provide an overview of the draft specifications and the ongoing progress made by the respective working groups.
Three primary specifications will be discussed:
-Discovery and client registration, emphasizing transparent processes and secure and private access
-Customer data, centering around customer tariffs, bills, energy usage, and full consumption disclosure
-Power systems data, focusing on grid data, inclusive of transmission and distribution networks, generation, intergrid power flows, and market settlement data
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
The Department of Veteran Affairs (VA) invited Taylor Paschal, Knowledge & Information Management Consultant at Enterprise Knowledge, to speak at a Knowledge Management Lunch and Learn hosted on June 12, 2024. All Office of Administration staff were invited to attend and received professional development credit for participating in the voluntary event.
The objectives of the Lunch and Learn presentation were to:
- Review what KM ‘is’ and ‘isn’t’
- Understand the value of KM and the benefits of engaging
- Define and reflect on your “what’s in it for me?”
- Share actionable ways you can participate in Knowledge - - Capture & Transfer
Your One-Stop Shop for Python Success: Top 10 US Python Development Providersakankshawande
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
Northern Engraving | Nameplate Manufacturing Process - 2024Northern Engraving
Manufacturing custom quality metal nameplates and badges involves several standard operations. Processes include sheet prep, lithography, screening, coating, punch press and inspection. All decoration is completed in the flat sheet with adhesive and tooling operations following. The possibilities for creating unique durable nameplates are endless. How will you create your brand identity? We can help!
inQuba Webinar Mastering Customer Journey Management with Dr Graham HillLizaNolte
HERE IS YOUR WEBINAR CONTENT! 'Mastering Customer Journey Management with Dr. Graham Hill'. We hope you find the webinar recording both insightful and enjoyable.
In this webinar, we explored essential aspects of Customer Journey Management and personalization. Here’s a summary of the key insights and topics discussed:
Key Takeaways:
Understanding the Customer Journey: Dr. Hill emphasized the importance of mapping and understanding the complete customer journey to identify touchpoints and opportunities for improvement.
Personalization Strategies: We discussed how to leverage data and insights to create personalized experiences that resonate with customers.
Technology Integration: Insights were shared on how inQuba’s advanced technology can streamline customer interactions and drive operational efficiency.
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-EfficiencyScyllaDB
Freshworks creates AI-boosted business software that helps employees work more efficiently and effectively. Managing data across multiple RDBMS and NoSQL databases was already a challenge at their current scale. To prepare for 10X growth, they knew it was time to rethink their database strategy. Learn how they architected a solution that would simplify scaling while keeping costs under control.
Skybuffer SAM4U tool for SAP license adoptionTatiana Kojar
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...Jason Yip
The typical problem in product engineering is not bad strategy, so much as “no strategy”. This leads to confusion, lack of motivation, and incoherent action. The next time you look for a strategy and find an empty space, instead of waiting for it to be filled, I will show you how to fill it in yourself. If you’re wrong, it forces a correction. If you’re right, it helps create focus. I’ll share how I’ve approached this in the past, both what works and lessons for what didn’t work so well.
High performance Serverless Java on AWS- GoTo Amsterdam 2024Vadym Kazulkin
Java is for many years one of the most popular programming languages, but it used to have hard times in the Serverless community. Java is known for its high cold start times and high memory footprint, comparing to other programming languages like Node.js and Python. In this talk I'll look at the general best practices and techniques we can use to decrease memory consumption, cold start times for Java Serverless development on AWS including GraalVM (Native Image) and AWS own offering SnapStart based on Firecracker microVM snapshot and restore and CRaC (Coordinated Restore at Checkpoint) runtime hooks. I'll also provide a lot of benchmarking on Lambda functions trying out various deployment package sizes, Lambda memory settings, Java compilation options and HTTP (a)synchronous clients and measure their impact on cold and warm start times.
Must Know Postgres Extension for DBA and Developer during MigrationMydbops
Mydbops Opensource Database Meetup 16
Topic: Must-Know PostgreSQL Extensions for Developers and DBAs During Migration
Speaker: Deepak Mahto, Founder of DataCloudGaze Consulting
Date & Time: 8th June | 10 AM - 1 PM IST
Venue: Bangalore International Centre, Bangalore
Abstract: Discover how PostgreSQL extensions can be your secret weapon! This talk explores how key extensions enhance database capabilities and streamline the migration process for users moving from other relational databases like Oracle.
Key Takeaways:
* Learn about crucial extensions like oracle_fdw, pgtt, and pg_audit that ease migration complexities.
* Gain valuable strategies for implementing these extensions in PostgreSQL to achieve license freedom.
* Discover how these key extensions can empower both developers and DBAs during the migration process.
* Don't miss this chance to gain practical knowledge from an industry expert and stay updated on the latest open-source database trends.
Mydbops Managed Services specializes in taking the pain out of database management while optimizing performance. Since 2015, we have been providing top-notch support and assistance for the top three open-source databases: MySQL, MongoDB, and PostgreSQL.
Our team offers a wide range of services, including assistance, support, consulting, 24/7 operations, and expertise in all relevant technologies. We help organizations improve their database's performance, scalability, efficiency, and availability.
Contact us: info@mydbops.com
Visit: https://www.mydbops.com/
Follow us on LinkedIn: https://in.linkedin.com/company/mydbops
For more details and updates, please follow up the below links.
Meetup Page : https://www.meetup.com/mydbops-databa...
Twitter: https://twitter.com/mydbopsofficial
Blogs: https://www.mydbops.com/blog/
Facebook(Meta): https://www.facebook.com/mydbops/
Northern Engraving | Modern Metal Trim, Nameplates and Appliance PanelsNorthern Engraving
What began over 115 years ago as a supplier of precision gauges to the automotive industry has evolved into being an industry leader in the manufacture of product branding, automotive cockpit trim and decorative appliance trim. Value-added services include in-house Design, Engineering, Program Management, Test Lab and Tool Shops.