Al-Armor provides protective textured coatings for aluminum alloys that eliminate problems with state of the art coatings. Al-Armor coatings have a metallurgical bond to aluminum substrates that does not damage mechanical properties, bond strength similar to alloy tensile strength, contain only aluminum compounds so do not cause galvanic corrosion, and testing shows much better wear resistance than uncoated aluminum. Al-Armor is available in various surface finishes and provides outstanding bond strength, wear resistance, and corrosion resistance for aluminum alloys.

1. Al-Armor
Superior Coatings
For
Aluminum Alloys
Al-Armor, LLC provides protective textured coatings for
aluminum alloys that eliminate all the problems typical of
state of the art coatings for aluminum. The novel
features of Al-Armor coatings include the following:
Al-Armor has a metallurgical bond to age hardened aluminum alloys,
but coating deposition does not damage the mechanical properties of
the substrate.
 Al-Armor has bond strength similar to alloy tensile strength (>13,000
psi) compared to mechanically bonded products with typical bond
strength of about 2000 psi for other commercially available coatings.
Al-Armor contains only aluminum and aluminum compounds, so the
galvanic corrosion problems that are characteristic of state of the art
coatings are not possible. Thus, Al-Armor coatings have corrosion
resistance as good (C22) or much better (CZ) than the substrate.
ASTM G-77 sliding wear test results demonstrate that the Al-Armor
C22 product has 12X better wear resistance than uncoated alloy 6061 at
3.6 Kg load.
 Al-Armor can be manufactured in a variety of
surface finishes with measurements ranging
from 500 µ-in to 900 µ-in for the CZ product
line and up to 1200 µ-in for the C22 coatings.
If you need a texture coating for aluminum
alloys with outstanding bond strength, wear
resistance and corrosion resistance, then
Al-Armor is the solution to your problems!
For More Information see al-armor.com