TECHIMP is the major player in Condition Assessment and
Permanent Monitoring of electrical Assets.
What makes us unique?
Enhanced Data Analysis: Patented TECHIMP T-F map filter technology.
One for ALL: AQUILA the new portable PD Acquisition Unit
TiSCADA: Complete Network Monitoring – one user interface for all condition data.
PPS: Permanent Power Supply – where no auxiliary power is available.
Techimp AQUILA - The new portable Partial Discharge Acquisition Unit Techimp HQ
The design of TECHIMP’s portable is influenced by many years of field experience. It can cope with the toughest outdoor conditions while taking measurements on any electrical asset. The battery-powered unit allows testing activities for up to 20 hour without auxiliary power available. The setup of the unit is simple and fast allowing to take measurements within minutes.
The most outstanding feature is that it can be used for testing of MV and HV cables, power and distribution transformers, motors and generators, GIS and MV switchgears together with the right combination of sensors and filters.
TECHIMP is the major player in Condition Assessment and
Permanent Monitoring of electrical Assets.
What makes us unique?
Enhanced Data Analysis: Patented TECHIMP T-F map filter technology.
One for ALL: AQUILA the new portable PD Acquisition Unit
TiSCADA: Complete Network Monitoring – one user interface for all condition data.
PPS: Permanent Power Supply – where no auxiliary power is available.
Techimp AQUILA - The new portable Partial Discharge Acquisition Unit Techimp HQ
The design of TECHIMP’s portable is influenced by many years of field experience. It can cope with the toughest outdoor conditions while taking measurements on any electrical asset. The battery-powered unit allows testing activities for up to 20 hour without auxiliary power available. The setup of the unit is simple and fast allowing to take measurements within minutes.
The most outstanding feature is that it can be used for testing of MV and HV cables, power and distribution transformers, motors and generators, GIS and MV switchgears together with the right combination of sensors and filters.
Vehicle Speed detecter By PRAGYA AGARWALiamtheone5
The project mentioned here is “Speed checker and over speed detector for Highways”. This project is designed and developed by taking into consideration the problem mentioned above. We have used two sensors in this project. These sensors detect the vehicle speed. Condition is that, the two sensors should be installed at a distance of 100 meteres apart from one another.
Now-a-days we hear news about accidents on Highways very frequently. And in most of the cases main reason of accident is overspeed. Although all highways do have signboards indicating maximum speed limit for the sake of driver’s safety, but still people does not obey highway speed limit.
This is a presentation of the Sky Light Systems family by Nabla Quadro. It involves traffic flow monitoring systems (infomobility), smart parking management and adaptive traffic signal control (UTC).
Arduino Based Vehicle Abnormal Behavior Detection System using Camera with SD...ijtsrd
This paper presents a device to detect the vehicle's speed and recording the image. The major cause of road accident is mostly caused by human speed. The speed of a moving vehicle is determined by using calculation from a particular distance and time as an approach to estimate the vehicle speed. This system is designed to reduce the road accidents in the development of the vehicle speed detector system by using an IR sensor, Camera, 16x2 LCD, buzzer, LED and Arduino UNO. Police stations handle this system for reducing the vehicle's accidents conditions. In this system, two IR LED's transmitter and receiver sensor pairs, which are installed on the highway 27 cm apart, with the transmitter and the receiver of each pair on the same side of the road. The system displays the time taken by the vehicle in crossing the distance from one pair to the other from which the speed of the vehicle is calculated. If a vehicle exceeds the speed limit then LED is ON while the buzzing sound gives an indication to the police stations. The camera is used for recording the vehicle's images and LCD is used to display the vehicle's speed. Arduino UNO is the heart of the system, which controls all the function of the circuit. Ni Ni San Hlaing | Lae Yin Mon "Arduino Based Vehicle Abnormal Behavior Detection System using Camera with SD Card" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26519.pdfPaper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/26519/arduino-based-vehicle-abnormal-behavior-detection-system-using-camera-with-sd-card/ni-ni-san-hlaing
OBD GPS Tracker for Car – Virtually Connect Your Car to Your Digital Life
The OBD Car Tracking device allows you to connect your car to your digital life. Vehicle’s location data and engine performance analysis wirelessly syncs in to your smartphone or laptop. You can track your car’s location in real-time or view status reports of vehicle components via the mobile app or web platform.
To get more information about our dealers, distributors & partners and for placing bulk orders, please contact
ThinkRace Technology
ifm electronic has added new features and functions to the ifm product line of speed monitors. In addition to the high input frequency of up to 60,000 pulses / minute and configurable functions, these also include an extended operating temperature range up to -40 °C. The newly developed luminous OLED display allows an optimal indication of all display values.
Design and Construction of Speed Detection System for Vehiclesijtsrd
The objective of this paper is to detect the over speed for vehicles on the highway road. Although the maximum speed limit on the highway, many accidents keep on because of over speed driving. It is necessary to solve these problems through electronics circuit. This paper describes speed detection system for vehicles. The highway traffic police are easy to check over speed by using this system. This system mainly consists of Arduino UNO, two IR sensors MD 0138 Infrared Obstacle Avoidance Sensor , 1602A LCD display and buzzer. The detected speed is displayed on LCD. Moreover, if the vehicle crosses the limited speed, this system displays the condition of over speed on LCD and the buzzer is alarmed. Lae Yin Mon | Khin Khin Saw ""Design and Construction of Speed Detection System for Vehicles"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23173.pdf
Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23173/design-and-construction-of-speed-detection-system-for-vehicles/lae-yin-mon
Our Communication and Control device is a great additional equipment for various range of work machines.
Having this unit installed you would be able to monitor your whole working process and optimize it.
Immediate benfe t is reduction of operational cost.
This presentation deals with the most important part of LABVIEW which is the Data Acquisition which mainly deals with how the signal is generated and distributed virtually.
Vehicle Speed detecter By PRAGYA AGARWALiamtheone5
The project mentioned here is “Speed checker and over speed detector for Highways”. This project is designed and developed by taking into consideration the problem mentioned above. We have used two sensors in this project. These sensors detect the vehicle speed. Condition is that, the two sensors should be installed at a distance of 100 meteres apart from one another.
Now-a-days we hear news about accidents on Highways very frequently. And in most of the cases main reason of accident is overspeed. Although all highways do have signboards indicating maximum speed limit for the sake of driver’s safety, but still people does not obey highway speed limit.
This is a presentation of the Sky Light Systems family by Nabla Quadro. It involves traffic flow monitoring systems (infomobility), smart parking management and adaptive traffic signal control (UTC).
Arduino Based Vehicle Abnormal Behavior Detection System using Camera with SD...ijtsrd
This paper presents a device to detect the vehicle's speed and recording the image. The major cause of road accident is mostly caused by human speed. The speed of a moving vehicle is determined by using calculation from a particular distance and time as an approach to estimate the vehicle speed. This system is designed to reduce the road accidents in the development of the vehicle speed detector system by using an IR sensor, Camera, 16x2 LCD, buzzer, LED and Arduino UNO. Police stations handle this system for reducing the vehicle's accidents conditions. In this system, two IR LED's transmitter and receiver sensor pairs, which are installed on the highway 27 cm apart, with the transmitter and the receiver of each pair on the same side of the road. The system displays the time taken by the vehicle in crossing the distance from one pair to the other from which the speed of the vehicle is calculated. If a vehicle exceeds the speed limit then LED is ON while the buzzing sound gives an indication to the police stations. The camera is used for recording the vehicle's images and LCD is used to display the vehicle's speed. Arduino UNO is the heart of the system, which controls all the function of the circuit. Ni Ni San Hlaing | Lae Yin Mon "Arduino Based Vehicle Abnormal Behavior Detection System using Camera with SD Card" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26519.pdfPaper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/26519/arduino-based-vehicle-abnormal-behavior-detection-system-using-camera-with-sd-card/ni-ni-san-hlaing
OBD GPS Tracker for Car – Virtually Connect Your Car to Your Digital Life
The OBD Car Tracking device allows you to connect your car to your digital life. Vehicle’s location data and engine performance analysis wirelessly syncs in to your smartphone or laptop. You can track your car’s location in real-time or view status reports of vehicle components via the mobile app or web platform.
To get more information about our dealers, distributors & partners and for placing bulk orders, please contact
ThinkRace Technology
ifm electronic has added new features and functions to the ifm product line of speed monitors. In addition to the high input frequency of up to 60,000 pulses / minute and configurable functions, these also include an extended operating temperature range up to -40 °C. The newly developed luminous OLED display allows an optimal indication of all display values.
Design and Construction of Speed Detection System for Vehiclesijtsrd
The objective of this paper is to detect the over speed for vehicles on the highway road. Although the maximum speed limit on the highway, many accidents keep on because of over speed driving. It is necessary to solve these problems through electronics circuit. This paper describes speed detection system for vehicles. The highway traffic police are easy to check over speed by using this system. This system mainly consists of Arduino UNO, two IR sensors MD 0138 Infrared Obstacle Avoidance Sensor , 1602A LCD display and buzzer. The detected speed is displayed on LCD. Moreover, if the vehicle crosses the limited speed, this system displays the condition of over speed on LCD and the buzzer is alarmed. Lae Yin Mon | Khin Khin Saw ""Design and Construction of Speed Detection System for Vehicles"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23173.pdf
Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23173/design-and-construction-of-speed-detection-system-for-vehicles/lae-yin-mon
Our Communication and Control device is a great additional equipment for various range of work machines.
Having this unit installed you would be able to monitor your whole working process and optimize it.
Immediate benfe t is reduction of operational cost.
This presentation deals with the most important part of LABVIEW which is the Data Acquisition which mainly deals with how the signal is generated and distributed virtually.
RACO Verbatim Gateway successfully installed in 27 Saudi Electricity Company substations. If you would like to download this presentation please contact me.
SENSOR ID is a company founded by a team of young engineers, that polarizes its own activity into designing and production devices dedicated to the world of applications of IoT. Thanks to the experience gained with CUBIT Innovation Lab and University of Pisa, SensorID has developed a strong know-how in wireless technology standard integration and implementation and in wireless network topology design. SensorID built a complete portfolio of embedded electronic modules based on NFC, UHF, RFID.
UPM601-C Ultra High Frequency Partial Discharge Monitor | Rugged Monitoringrugged_monitoring
The Portable Ultra-High Frequency Partial Discharge (PD) Monitor allows high-voltage asset owners to continuously monitor insulation defects. It can also conduct offline PD measurements during high-voltage AC testing. The compact and rugged design of this portable monitor facilitates easy installation and initiation. The system can communicate with users through IEC61850 or the proprietary Rugged Enterprise/RM EYE software suite from Rugged Monitoring. Its simple design allows seamless interfacing with third-party protocols.
Read more : https://bit.ly/49qvp61
![About Aeron ,[object Object],[object Object],[object Object],[object Object]](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)