S3FOOD - Eureka funding for digitalisationCathMersh
Introduction to the pan-European EUREKA network for market-oriented, industrial R&D&I - a funding opportunity for digitalisation
Presentation at S3FOOD smart sensor study visit and matchmaking event
Some tricky ways to define the startup's market sizeAlex Gorin
Presentation for the workshop in Startup Accelerators and Venture Cafe Rotterdam.
Some indirect methods to define the market size of your startup. Usecases.
Who is exactly your audience? And how to understand which part of the market could be yours.
You can buy some well-done report online. But diving into this analysis deeply you’ll understand much more about your product, your competitors and your market penetration exactly. Let’s look at some tools, sources, and lifehacks to get information for indirect research.
Welcome to Visit us at BreakBulk Europe 2015Hacklin
Join us in Antwerp, 18-21 May 2015 for BreakBulk Europe - the largest exhibition & educational forum in the world focused on project cargo logistics professionals. Booth #830, Hall #4
S3FOOD - Eureka funding for digitalisationCathMersh
Introduction to the pan-European EUREKA network for market-oriented, industrial R&D&I - a funding opportunity for digitalisation
Presentation at S3FOOD smart sensor study visit and matchmaking event
Some tricky ways to define the startup's market sizeAlex Gorin
Presentation for the workshop in Startup Accelerators and Venture Cafe Rotterdam.
Some indirect methods to define the market size of your startup. Usecases.
Who is exactly your audience? And how to understand which part of the market could be yours.
You can buy some well-done report online. But diving into this analysis deeply you’ll understand much more about your product, your competitors and your market penetration exactly. Let’s look at some tools, sources, and lifehacks to get information for indirect research.
Welcome to Visit us at BreakBulk Europe 2015Hacklin
Join us in Antwerp, 18-21 May 2015 for BreakBulk Europe - the largest exhibition & educational forum in the world focused on project cargo logistics professionals. Booth #830, Hall #4
TIB – Bucharest International Technical FairMihaela Marcu
Bucharest International Technical Fair is an emblematic trade fair for Romexpo and an event of high importance for the Romanian national economy.
In 2014, the trade fair celebrates 40 editions. TIB was first organized in 1970 and starting with 1993 it has been internationally certified by the Global Association of the Exhibitions Industry – UFI, being included among the most important technical fairs at international level.
On the whole the organisers welcomed on the 3 days of the fair, from 04. December to 06. December 2018, about 1291 exhibitors and 35540 visitors on the Chinacoat in Guangzhou.
info@globalb2bcontacts.com
http://www.globalb2bcontacts.com
https://globalb2bcontacts.com/Technology-email-lists.html
https://globalb2bcontacts.com/sub-industry-email-database.html
https://globalb2bcontacts.com/email-database.html
https://globalb2bcontacts.com/Healthcare-email-list.html
Total Telecom Conferences and Awards 2018Rob Chambers
Overview of our events for 2018, including: Submarine Networks, Gigabit Access, Connected Britain, Carriers World and Total Telecom Congress.
Links to websites and team contacts. For more information email info@totaltele.com
Despite a sluggish overall economic situation, bad weather in eastern and central France and protests by farmers, MIDEST, the world’s leading industrial subcontracting show, which ran for the 43rd time from 19th to 22nd November at the Paris Nord Villepinte Exhibition Centre, was a real success. On opening it matched the previous year’s show in terms of the number of exhibitors (1,702 companies from 38 countries) and exhibition space but it then went on to attract 42,101 professionals from all sectors of industry, which was an increase of 7% on 2012. Not only were the numbers up but the visitors were highly qualified and came with plans for actual business projects.
The numerous events and initiatives reached out to a broad public, including, as they did, the show’s focus on energy, the choice of its first non-European country of the year, South Africa, the special Algerian day, the promotion of mechanical engineering trades to young girls by the FIM (mechanical engineering federation) and the b2fair– Business to Fairs® business meetings.
ABN AMRO: Voorzichtig herstel lijkt in aantocht, 28 januari 2013ABN AMRO
Voorzichtig economisch herstel lijkt in aantocht. ABN AMRO voorziet -0,25% krimp in 2013, echter door herstel export zal 2014 weer groei laten zien.Vooruitzichten voor de industriële sectoren zijn gematigd. Chemie en machinebouw zullen al eerste een volumegroei laten zien.
Social media in de industrie, ABN AMRO 9 april 2013ABN AMRO
Industrie genereert meer omzet door gerichte inzet social media
• Industriële bedrijven krijgen gezicht door social media
• Rol social media in inkoopproces wordt steeds groter
• Onderscheiden van concurrent kan door relatie centraal te stellen
Binnen de industrie - waar de gedachte heerst dat social media vooral voor consumenten bedoeld zijn - blijken social media daadwerkelijk bij te dragen aan een betere bedrijfsvoering. Zo verhoogt de inzet van social media de autoriteit, versterkt het de klantrelaties en stellen deze bedrijven zich meer open op. Hierdoor zetten zij zich meer op de kaart en verhogen ze hun naamsbekendheid. Waar nu nog anoniem geproduceerd wordt op afgelegen industrieterreinen in hallen zonder ramen zorgen Twitter, LinkedIn, YouTube en Facebook voor een sociaal gezicht. Lees verder in dit nieuwe rapport van ABN AMRO over ‘Social Media voor de Industrie’, een interactief naslagwerk dat zij ter gelegenheid van de eerste uitreiking van de IndustrialSocialMedia Award publiceert op 8 april 2013.
NB: Enkele hyperlinks bleken niet te werken in de 8 april-versie. Dit is de updated versie.
ING My Industry: Dutch Manufacturing 2010, nov 2006ABN AMRO
ONE VOICE, de Nederlandse industrie bestaat uit vele verschillende branches en subbranches. Elke branche opereert in een specifieke markt en is afhankelijk van specifieke trends en ontwikkelingen. Er zin echter meer overeenkomsten dan verschillen! Dit rapport is het resultaat van een unieke samenwerking tussen alle industriële branches op zo samen aan een beter imago te werken bij het brede publiek en de wens om een krachtig signaal af te geven richting de overheid.
Het rapport is geschreven op basis van een grote landelijke enquete en bevat 10 specifieke analyses en SWATs van de belangrijkste industriële sectoren in Nederland.
Abn amro rapport visie op industrie, mei 2014ABN AMRO
Nieuw rapport van ABN AMRO met fact sheets en korte trendbeschrijving voor de branches:
Technische groothandel
Machinebouw
Metaalbewerkingsindustrie
Producenten van metaalproducten
Windenergie en solar Verpakkingsmiddelenindustrie
Olie en gas toeleveranciers
Rubber- en kunststofproductenindustrie
TIB – Bucharest International Technical FairMihaela Marcu
Bucharest International Technical Fair is an emblematic trade fair for Romexpo and an event of high importance for the Romanian national economy.
In 2014, the trade fair celebrates 40 editions. TIB was first organized in 1970 and starting with 1993 it has been internationally certified by the Global Association of the Exhibitions Industry – UFI, being included among the most important technical fairs at international level.
On the whole the organisers welcomed on the 3 days of the fair, from 04. December to 06. December 2018, about 1291 exhibitors and 35540 visitors on the Chinacoat in Guangzhou.
info@globalb2bcontacts.com
http://www.globalb2bcontacts.com
https://globalb2bcontacts.com/Technology-email-lists.html
https://globalb2bcontacts.com/sub-industry-email-database.html
https://globalb2bcontacts.com/email-database.html
https://globalb2bcontacts.com/Healthcare-email-list.html
Total Telecom Conferences and Awards 2018Rob Chambers
Overview of our events for 2018, including: Submarine Networks, Gigabit Access, Connected Britain, Carriers World and Total Telecom Congress.
Links to websites and team contacts. For more information email info@totaltele.com
Despite a sluggish overall economic situation, bad weather in eastern and central France and protests by farmers, MIDEST, the world’s leading industrial subcontracting show, which ran for the 43rd time from 19th to 22nd November at the Paris Nord Villepinte Exhibition Centre, was a real success. On opening it matched the previous year’s show in terms of the number of exhibitors (1,702 companies from 38 countries) and exhibition space but it then went on to attract 42,101 professionals from all sectors of industry, which was an increase of 7% on 2012. Not only were the numbers up but the visitors were highly qualified and came with plans for actual business projects.
The numerous events and initiatives reached out to a broad public, including, as they did, the show’s focus on energy, the choice of its first non-European country of the year, South Africa, the special Algerian day, the promotion of mechanical engineering trades to young girls by the FIM (mechanical engineering federation) and the b2fair– Business to Fairs® business meetings.
ABN AMRO: Voorzichtig herstel lijkt in aantocht, 28 januari 2013ABN AMRO
Voorzichtig economisch herstel lijkt in aantocht. ABN AMRO voorziet -0,25% krimp in 2013, echter door herstel export zal 2014 weer groei laten zien.Vooruitzichten voor de industriële sectoren zijn gematigd. Chemie en machinebouw zullen al eerste een volumegroei laten zien.
Social media in de industrie, ABN AMRO 9 april 2013ABN AMRO
Industrie genereert meer omzet door gerichte inzet social media
• Industriële bedrijven krijgen gezicht door social media
• Rol social media in inkoopproces wordt steeds groter
• Onderscheiden van concurrent kan door relatie centraal te stellen
Binnen de industrie - waar de gedachte heerst dat social media vooral voor consumenten bedoeld zijn - blijken social media daadwerkelijk bij te dragen aan een betere bedrijfsvoering. Zo verhoogt de inzet van social media de autoriteit, versterkt het de klantrelaties en stellen deze bedrijven zich meer open op. Hierdoor zetten zij zich meer op de kaart en verhogen ze hun naamsbekendheid. Waar nu nog anoniem geproduceerd wordt op afgelegen industrieterreinen in hallen zonder ramen zorgen Twitter, LinkedIn, YouTube en Facebook voor een sociaal gezicht. Lees verder in dit nieuwe rapport van ABN AMRO over ‘Social Media voor de Industrie’, een interactief naslagwerk dat zij ter gelegenheid van de eerste uitreiking van de IndustrialSocialMedia Award publiceert op 8 april 2013.
NB: Enkele hyperlinks bleken niet te werken in de 8 april-versie. Dit is de updated versie.
ING My Industry: Dutch Manufacturing 2010, nov 2006ABN AMRO
ONE VOICE, de Nederlandse industrie bestaat uit vele verschillende branches en subbranches. Elke branche opereert in een specifieke markt en is afhankelijk van specifieke trends en ontwikkelingen. Er zin echter meer overeenkomsten dan verschillen! Dit rapport is het resultaat van een unieke samenwerking tussen alle industriële branches op zo samen aan een beter imago te werken bij het brede publiek en de wens om een krachtig signaal af te geven richting de overheid.
Het rapport is geschreven op basis van een grote landelijke enquete en bevat 10 specifieke analyses en SWATs van de belangrijkste industriële sectoren in Nederland.
Abn amro rapport visie op industrie, mei 2014ABN AMRO
Nieuw rapport van ABN AMRO met fact sheets en korte trendbeschrijving voor de branches:
Technische groothandel
Machinebouw
Metaalbewerkingsindustrie
Producenten van metaalproducten
Windenergie en solar Verpakkingsmiddelenindustrie
Olie en gas toeleveranciers
Rubber- en kunststofproductenindustrie
ABN AMRO Bedrijvigheid in de industrie blijft gunstig, 26 nov 2013ABN AMRO
Na een lange periode van krimp lijken de meeste indicatoren voor de industrie weer de goede kant op te wijzen. De inkoopmanagers bij industriële bedrijven blijven optimistisch, de stemming onder producenten is verbeterd en de gemiddelde dagproductie vertoonde eindelijk weer eens groei op jaarbasis. De vraag rest: is dit een tijdelijke opleving of zet dit herstel door?
ABN AMRO Aantal faillissementen blijft erg hoog, 10 juni 2013ABN AMRO
Aantal faillissementen blijft erg hoog. In Bouw en Industrie vielen zowel absoluut als relatief meeste faillissementen.
Er werden in mei 796 bedrijven en instellingen (rechtspersonen, dus excl. eenmanszaken) failliet verklaard. Het hoogste aantal sinds het begin van de reeks in 1981 volgens het CBS. In deze update enige achtergronden bij de gepresenteerde cijfers.
Smart Future: slimme technologie raakt ons hele levenABN AMRO
Slimme technologie leidt tot doorbraken in alle economische sectoren
• Nieuw tijdperk breekt aan waarin basisinnovaties oude structuren opschudden
• Interconnectiviteit door smart technologie heeft impact op alle economische sectoren
• Slimme technologie als aanjager van economische groei
De wereld staat aan de vooravond van een nieuwe fase in het internettijdperk, waarin alle dingen met elkaar gaan communiceren en - zonder tussenkomst van de mens - autonoom acties uitvoeren. Smart technology zal resulteren in nieuwe basisinnovaties die zullen leiden tot een afbraak van oude structuren en impact hebben op alle economische sectoren. Dit concludeert ABN AMRO in het rapport ‘SMART future. Slimme technologie raakt ons hele leven’, dat tijdens de Dutch Design Week in Eindhoven wordt gepresenteerd.
Smart schudt gehele economie op
Op dit moment bevinden we ons in een overgangsfase: ‘creative destruction’. Een proces van technologische veranderingen, waarbij bestaande en nieuwe uitvindingen zich ontwikkelen. Deze zullen, net als andere historische technologische doorbraken - van stoommachine tot microchip - uitgroeien tot basinnovaties die de economische structuur blijvend en ingrijpend veranderen. Smart technologie speelt een centrale rol: alles wordt een computer en onderling met elkaar verbonden. ABN AMRO denkt dat deze ontwikkelingen alle sectoren zullen raken. Zoals de zorg - waar robots de nieuwe ‘handen aan het bed’ worden - of de bouw, waar bewoners dankzij domotica hun huis volledig interactief kunnen bedienen. Nu nog via één centraal apparaat, straks mogelijk via spraak of een slimme bril. Ook in de industrie verandert er veel. Slimme fabrieken passen fabricageprocessen zelf aan zodra een storing optreedt. Voor alle sectoren geldt dat structuren en processen worden opgeschud en opnieuw uitgevonden.
Van Smart Farming tot Smart Money
In haar rapport schetst ABN AMRO toekomstscenario’s voor vijf economische sectoren. Zo vervult de Nederlandse agrarische sector een internationale voortrekkersrol op het gebied van Smart Farming. Deze nieuwe stap in agri-automatisering laat producenten betere beslissingen nemen met behulp van gedetailleerde meet- en regelhulpmiddelen. In de logistieke sector werken pioniers aan het Cross Chain Control Center (4C): een regiecentrum waar zij met behulp van slimme IT-toepassingen en datasharing goederenstromen bundelen. Zo zorgen ze voor een hogere beladingsgraad, minder kosten en een lagere CO2-uitstoot. In de bouw neemt de vraag naar Smart Homes toe, waarin door bouwoplossingen bewoners ondanks fysieke ongemakken of ouderdom thuis kunnen blijven wonen. ABN AMRO denkt dat domotica in de komende jaren een vlucht zal nemen: van een koelkast die zelf boodschappen bestelt tot sensoren die bij gebrek aan beweging in huis de thuiszorg zal waarschuwen. In de kledingindustrie zullen Smart Textiles - met een groeiprognose van ruim 400 procent in 8 jaar: 1,5 miljard dollar omzet in 2020 - ui
Abn amro rapport toeleverancier blijven of eigen product gaan maken, jan 2016ABN AMRO
- Nederlandse industriële toeleverancier moet inhaalslag maken bij transformatie naar oem’er;
- Toeleveranciers willen minder afhankelijkheid, meer internationale afnemers en hogere marges;
- Kleine gespecialiseerde toeleveranciers verdienen meer dan gemiddelde oem’er.
Het grootste deel van de Nederlandse industrie richt zich op toelevering. Dat is al van oudsher zo: ons land kent traditioneel een grote variëteit aan industriële toeleveranciers in het midden- en kleinbedrijf. De meeste onderdelen gaan naar het buitenland, bijvoorbeeld naar ons belangrijkste afzetland Duitsland. Want Nederland heeft zelf maar weinig grote original equipment manufacturers (oem’ers): bedrijven die onder eigen merknaam complete machines en apparaten op de markt brengen. Dit zorgt dat er in ons land weinig betrouwbare afnemers zijn voor grote, hoogtechnische toeleveranciers. En dat is een probleem, want het zet toeleveranciers in een afhankelijke en kwetsbare positie.
Servitization: service is the future of manufacturingABN AMRO
Servitization is the process whereby services are given an increasingly important role in the business model of manufacturing companies. In addition to – and sometimes at the expense of – traditional product and machine sales. Service turns from being a cost item into an opportunity to provide better service for the customer and thereby generate additional revenue. Servitization in the manufacturing industry can consist of companies proactively offering repair and overhaul services, spare parts and training in addition to their core products. But servitization also includes broader services such as consultancy, financing, insurance and logistics services. In this report ABN AMRO and Praetimus discuss the advantages, but also the challenges involved in the transition to a service-oriented business model.
ABN AMRO rapport social media in de industrie, 8 april 2013 (ZIE UPDATED VERS...ABN AMRO
Industrie genereert meer omzet door gerichte inzet social media
• Industriële bedrijven krijgen gezicht door social media
• Rol social media in inkoopproces wordt steeds groter
• Onderscheiden van concurrent kan door relatie centraal te stellen
Binnen de industrie - waar de gedachte heerst dat social media vooral voor consumenten bedoeld zijn - blijken social media daadwerkelijk bij te dragen aan een betere bedrijfsvoering. Zo verhoogt de inzet van social media de autoriteit, versterkt het de klantrelaties en stellen deze bedrijven zich meer open op. Hierdoor zetten zij zich meer op de kaart en verhogen ze hun naamsbekendheid. Waar nu nog anoniem geproduceerd wordt op afgelegen industrieterreinen in hallen zonder ramen zorgen Twitter, LinkedIn, YouTube en Facebook voor een sociaal gezicht. Lees verder in dit nieuwe rapport van ABN AMRO over ‘Social Media voor de Industrie’, een interactief naslagwerk dat zij ter gelegenheid van de eerste uitreiking van de IndustrialSocialMedia Award publiceert op 8 april 2013.
ABN AMRO rapport investeren in metaalbewerkingsmachines, febr 2014ABN AMRO
Na een aantal jaren van dalende omzetten, zien de vooruitzichten voor de metaalindustrie er nu weer gunstiger uit. Zowel het producenten- als het consumentenvertrouwen is toegenomen. Maar er zijn nog veel meer interessante ontwikkelingen gaande in deze sector. ABN AMRO Lease, Sector Advisory en Economisch Bureau Nederland, hebben daarom de belangrijkste ontwikkelingen in de metaalindustrie op een rij gezet. Deze ontwikkelingen zijn te lezen in de publicatie: Investeren in metaalbewerkingsmachines, low volume, high mix & high complexity.
Investeringen in de metaalindustrie worden groter en complexer. De markt vraagt in toenemende mate om producten in kleine aantallen, in een grote diversiteit en van grotere complexiteit. Industriële SLS-printers die metaal kunnen 3D-printen worden steeds meer aangeschaft door innovatieve bedrijven. Een andere belangrijke ontwikkeling is dat connectiviteit een rol gaat spelen en bepalend is voor de richting van de investeringen in de industrie. Het zijn met name innovaties in software die dit alles mogelijk maken. Kortom: software is de nieuwe hardware.
Rubber: vandaag zwart, morgen groen (Kunststof Magazine, mei 2013)ABN AMRO
De rubber- en rubberverwerkende industrie in Nederland – het bestaat wel, maar wat weten w e rover? Rubber blkt verrassend veelzijdiger te zijn dan verwacht. Het is bovendien niet alleen onmisbaar, maar ook onvervangbaar in tal van toepassingen.
In dit laatste artikel van het tweeluik over de rubberverwerkende industrie wordt ingegaan op
specifieke aspecten zoals beschikbaarheid en duurzaamheid, recycling en innovatie.
ABN AMRO rapport Bouwrobots winnen terrein, maart 2022ABN AMRO
Het gebruik van robots in de bouwsector is noodzakelijk om de enorme bouwopgave het hoofd te bieden, de bouw duurzamer en veiliger te maken en de faalkosten te verlagen. De Nederlandse bouwsector steekt tot 2030 zo’n 306 miljoen euro in robots. Verwacht wordt dat het aantal bouwrobots, van drones tot 3D-betonprinters, met jaarlijks gemiddeld 14,1 procent groeit. Een snelle toename, maar Nederland loopt vanwege een valste start internationaal nog wel achter.
ABN AMRO rapport Ondernemers onderschatten het risico op cybercriminaliteit, ...ABN AMRO
De kosten van cyberaanvallen zijn vorig jaar geëxplodeerd. Vooral sectoren die sterk inzetten op digitale dataverwerking en communicatie, zoals de industrie, de retail en de zorg, blijken kwetsbaar. Diefstal van data en het gijzelen van systemen nemen hals over kop toe. Ondanks deze toegenomen dreiging blijft de risicoperceptie van cybercriminaliteit onder ondernemers laag.
ABN AMRO rapport Services als verdienmodel voor de industrie, sept 2021ABN AMRO
Servitization is het proces waarbij dienstverlening een steeds grotere rol krijgt in het bedrijfsmodel van maakbedrijven. Het veranderproces naar servitization is niet eenvoudig. Dit rapport geeft richting en een stappenplan voor een winstgevende dienstverlening.
ABN AMRO AgriTech, Battle for agricultural robots begins, oct 2020 (en)ABN AMRO
Dutch AgriTech market can triple in ten years
Global population growth, labour shortages, scarcity of agricultural land and the need for sustainable food production will give a tremendous impulse to agricultural robotisation. ABN AMRO estimates current worldwide revenue in the ‘AgriTech market’ at more than EUR 6 billion. The Dutch market holds a share of 11.5% in that market, mainly thanks to milking and feeding robots. If the existing bottlenecks are addressed, the Dutch AgriTech market has the potential to triple in ten years from EUR 715 million to EUR 2.5 billion in 2030; that is an average growth of 13% per year.
BN AMRO Nederland na corona in vier scenarios (industrie), juli 2020ABN AMRO
De coronapandemie heeft enorme economische en maatschappelijke gevolgen. De snelheid en omvang waarmee de pandemie om zich heen heeft gegrepen, roept de vraag op hoe in de toekomst met dergelijke risico’s moet worden omgegaan en vooral wie deze moet dragen. Is het de overheid die altijd het beste antwoord op rampspoed heeft, of is de markt veel beter in staat om ontij te pareren? En is de burger het meest weerbaar binnen zijn eigen cocon, of wanneer hij veiligheid zoekt in gemeenschap met anderen?
Het zijn deze fundamentele vragen waarop we in dit nieuwe rapport antwoord hopen te geven. De winnaars van morgen zijn immers de bedrijven en instanties die flexibel kunnen inspelen op onverwachte gebeurtenissen of, nog beter, die een robuuste langetermijnstrategie weten te formuleren.
Robuuste strategie
Het formuleren van een robuuste strategie is makkelijker gezegd dan gedaan. Het vereist inzicht in de onzekerheden die van invloed zijn op de organisatie en haar ecosysteem. Dit kunnen onzekerheden zijn die specifiek voor een organisatie relevant zijn, of onzekerheden die betrekking hebben op maatschappelijke veranderingen van meer brede aard. In dit rapport gaan we in op twee altijd aanwezige spanningsvelden die momenteel veelvuldig in het publieke debat naar voren komen; het machtsevenwicht tussen overheid en vrije markt en de zoektocht naar een werkbare verhouding tussen individualisme en collectief handelen.
De combinatie van die twee spanningsvelden resulteert in vier scenarios voor de toekomst. Dit rapport beschrijft hoe die vier scenarios, op sectorniveau, zich kunnen ontvouwen in de periode na het overwinnen van de huidige crisis. Het doel is niet zozeer om met harde cijfers en puntschattingen precieze voorspellingen te geven, meer om in grote lijnen verschillende toekomstige werelden te schetsen ter ondersteuning van strategische discussies en plannen voor de toekomst.
Ondernemen is vooruitzien
We nodigen u daarom uit het rapport te downloaden, en de toekomst te verkennen aan de hand van vier alternatieve werelden: Vrijheid voor de sterken, Open hightech-gemeenschap, De eigen staat en De beschermde staat.
ABN AMRO rapport Winstmarge onder druk in tijden van hoogconjunctuur, maart 2019ABN AMRO
Ondanks hogere omzet staat winstmarge industrie onder druk
Ruim een derde van industriële bedrijven realiseert ondanks hoogconjunctuur lagere winstmarges. Hogere werkdruk leidt tot meer ziekteverzuim en uitval van personeel. Investeren in hogere arbeidsproductiviteit voorwaarde om winstmarges op peil te houden
• Nieuwe verdienmodellen cruciaal om meer waarde te creëren en meer winst te maken
ABN AMRO rapport Aandrijftechniek, sept 2019ABN AMRO
De toeleverketen van aandrijftechniek staat aan de vooravond van grote consolidatie. Belangrijke afnemers van aandrijvingen, zoals machinebouwers als Vanderlande en industriële producenten als Tata Steel, zetten in hoge mate in op automatisering en digitalisering van hun productieproces. Dit wordt gedreven door hun vraag om hogere efficiëntie, minder stilstand en lagere onderhoudskosten. Dit rapport gaat in op de veranderingen in deze omvangrijke sector. De nadruk ligt op de digitalisering en de gevolgen die dit heeft voor de strategie voor de partijen uit de keten.
BN AMRO rapport Raising the bars, oktober 2008ABN AMRO
Dit Nevat-rapport ‘Raising the bars’ in oktober 2008 beschrijft de ontwikkelingen in de samenwerking tussen fabrikanten van productiemachines en haar industriële toeleveranciers. Maar het geeft ook vijf ontwikkelrichtingen voor de Nederlandse toeleverancier om succesvol te blijven in een concurrerende, internationale markt.
In oktober 2019 is het vervolg gepubliceerd
3D-printing in Nederland: klein in omzet, groot in ideeënABN AMRO
De markt voor 3D-printing is wereldwijd miljarden waard maar in Nederland slechts honderd miljoen. De omzet verdubbelt echter elk jaar en wat onze industrie mist aan grote bedrijven maakt het ruimschoots goed aan grootse innovaties. ABN Amro heeft als enige bank een eigen 3D-printing specialist en kan daardoor bedrijven en investeerders perfect met elkaar matchen.
Bron: Ondernemingsbelang, editie 02-2017 door Jeroen Kuypers
Vraag naar metaalpoeder groeit door 3D-printingABN AMRO
Mondiale behoefte aan 3D-metaalgeprinte producten groeit sterk en geeft de vraag naar metaalpoeders een impuls
• Groei van 3D-metaalprinting in Nederland loopt echter flink achter
• Transparantie over markt en prijsvorming van metaalpoeders is laag
De internationale markt voor 3D-printen groeit nog steeds hard. Steeds meer eindproducten worden geprint en vooral metaalprinters produceren op industriële schaal voor de lucht- en ruimtevaart, medische markten, machinebouwers en maakindustrie. In 2015 bedroeg de wereldwijde omzet in de 3D-printing markt 4,9 miljard euro: een stijging van 25,9 procent ten opzichte van 2014. Ook de Nederlandse omzet groeit sneller dan verwacht, concluderen ABN AMRO en Berenschot in een gezamenlijk rapport. In 2016 was de Nederlandse 3D-printing markt goed voor zo’n 100 miljoen euro: een verdubbeling ten opzichte van 2015. ABN AMRO en Berenschot verwachten dat de omzet in 2017 verder zal groeien naar 120 miljoen euro.
ABN AMRO rapport: Op weg naar de circulaire autoABN AMRO
Consument dwingt auto-industrie om meer circulair te produceren De auto-industrie verandert en zal in een stroomversnelling komen, omdat de consument anders naar mobiliteit kijkt. Zo bewijst de groeiende vraag naar bedrijfsmodellen als ‘Car-as-a-Service’ en autodelen - een stijging van 300 procent in 2 jaar - dat de auto vaker als dienst wordt beschouwd. Dit leidt tot een verschuiving van
eigendom, een hogere bezettingsgraad en daardoor een kortere levensduur van auto’s. Deze optelsom vereist
een radicale innovatie van auto-ontwerp en materiaalgebruik, waardoor circulariteit in de auto-industrie prioriteit
moet worden.
Industrial Internet of Things; noodzaak voor industrie, kans voor IT-sector f...ABN AMRO
• Nieuwe verdienmodellen door Industrial Internet of Things belangrijker dan efficiencywinst
• Investeringen door de industrie kunnen EUR 2 miljard jaaromzet aan de IT-sector toevoegen
• Maar cultuurverschillen tussen Industrie en IT zijn grote belemmering
3D printing in Nederland een groeimarkt van 45 miljoenABN AMRO
ABN AMRO schat de Nederlandse marktomzet in 3D printing voor 2015 rond de 45 miljoen euro. Dit is een optelsom van de professionele én de consumentenmarkt. Ondanks de enorme hype rond 3D-printen, is een geschatte Nederlandse marktomzet van 45 miljoen nog steeds beperkt. Een fractie van onze totale industriële productie. 3D-printing als industrie vertegenwoordigt
dus maar 0,045% van de Nl omzet in industrie (excl chemie en food).
En toch: een groei van ruim 30% per jaar en een disruptief karakter maken 3D-printing tot een ontwikkeling om in
de gaten te houden. Het is niet een directe bedreiging voor de traditionele maakindustrie, maar een
interessante aanvulling op de huidige productieprocessen. Het Wohlers rapport 2014 schat dat op lange termijn
meer dan 2% van de industriële omzet verdiend zal worden met 3D-printen. Dit zou dus een markt betekenen van
minimaal 2 miljard euro in Nederland.
Artikel uit The Asset (jan. 2014). Pizza’s printen in de ruimte of het printen van telefoonhoesjes, sieraden of zelfs wapens. 3D-printen staat volop in de belangstelling. Op beleggingsgebied bestaat echter opvallend weinig keuze. is het een kwestie van tijd tot de massa voor kassa
zorgt of blijft het vooral een speeltje voor ‘geeks’?
ABN AMRO Zie ginds komt de 3D-printer, dec 2014ABN AMRO
De Nederlandse consumentenmarkt voor 3D-printen is in 2013 definitief ontwaakt en staat voor een doorbraak. ABN AMRO verwacht dat 3D-geprinte producten de consumentenmarkt vanaf volgend jaar zullen veroveren. Hoewel deze feestdagen waarschijnlijk nog geen zak met zelf geprinte cadeautjes bij de haard of de kerstboom zal staan, denkt ABN AMRO dat dit snel zal veranderen.
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024Neo4j
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
Removing Uninteresting Bytes in Software FuzzingAftab Hussain
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
GridMate - End to end testing is a critical piece to ensure quality and avoid...ThomasParaiso2
End to end testing is a critical piece to ensure quality and avoid regressions. In this session, we share our journey building an E2E testing pipeline for GridMate components (LWC and Aura) using Cypress, JSForce, FakerJS…
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
How to Get CNIC Information System with Paksim Ga.pptxdanishmna97
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Essentials of Automations: The Art of Triggers and Actions in FMESafe Software
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Climate Impact of Software Testing at Nordic Testing DaysKari Kakkonen
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Communications Mining Series - Zero to Hero - Session 1DianaGray10
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
zkStudyClub - Reef: Fast Succinct Non-Interactive Zero-Knowledge Regex ProofsAlex Pruden
This paper presents Reef, a system for generating publicly verifiable succinct non-interactive zero-knowledge proofs that a committed document matches or does not match a regular expression. We describe applications such as proving the strength of passwords, the provenance of email despite redactions, the validity of oblivious DNS queries, and the existence of mutations in DNA. Reef supports the Perl Compatible Regular Expression syntax, including wildcards, alternation, ranges, capture groups, Kleene star, negations, and lookarounds. Reef introduces a new type of automata, Skipping Alternating Finite Automata (SAFA), that skips irrelevant parts of a document when producing proofs without undermining soundness, and instantiates SAFA with a lookup argument. Our experimental evaluation confirms that Reef can generate proofs for documents with 32M characters; the proofs are small and cheap to verify (under a second).
Paper: https://eprint.iacr.org/2023/1886
zkStudyClub - Reef: Fast Succinct Non-Interactive Zero-Knowledge Regex Proofs
Infographic 3D printing market in The Netherlands
1. 14.000.000
500.000
7.000.000
500.000
€ 22 million
Service providers
Services
Products
Printing systems
Professional market € Home market €
The Dutch 3D-printing market
Forecast 2015: total revenue € 45 million
Materials
Services
Products
Personal printers
€ 23 million
1.000.000
500.000
1.500.000
20.000.000