This document provides a step-by-step guide to the sandblasting process, outlining its efficiency in removing paint, etching, and enhancing surfaces compared to traditional sandpaper. It emphasizes the importance of safety precautions, equipment preparation, and the selection of appropriate blasting media. Additionally, it promotes Big A's Place LLC as a supplier of sandblasting accessories and equipment.

1. A Step-by-Step Guide to the
Sandblasting Process

2. Scrap the sandpaper and opt for the quick
and efficient process of sandblasting.
Sandblasting is used on both creative and
industrial levels, from removing old paint to
etching and engraving.
Master the art of sandblasting by following
this guide. Read up on the process,
recommended equipment, sandblasting
accessories, and top tips.
A Step-by-Step Guide to the
Sandblasting Process

3. Used in a variety of professions, sandblasting is the process by which the surface of
an object is eroded by means of a concentrated stream of very fine sand.
Sandblaster guns refine a surface while also giving a decorative finish to craft
metals. It can be used to remove old paint, smooth a rough surface, roughen a
smooth surface or give shape to an object.
In and around the home, sandblasting replaces the use for sandpaper, eliminating
the need for hand-sanding and the mess that goes along with it. Sandblasting is
quick, efficient and delivers desirable results.

4. It is important to be aware of the necessary safety precautions that need to be
put into place before home or industrial sandblasting can take place. Take note
of the following:
 Wear safety goggles to protect your eyes;
 Make use of protective gloves;
 Ensure that you wear a mask to avoid inhaling the
tiny particles of debris, and
 To avoid a big clean-up, wear old clothes or
overalls.

5. The first step in the sandblasting process is to determine what kind of material and
equipment are necessary to complete the task.
It is also important to clean the surface upon which you will be working to ensure
that there is no residue which will result in a marred finish.
 Analyze the degree of work that is required, the type of
blasting media that is required, and what tools will need to
be used.
 Wipe down the surface of the object.
 Ensure that all the correct safety apparel is available.
 Explore the different types of blasting media – for
materials that are more difficult to work with, abrasive
mediums will need to be used. These include plastic
abrasives, glass beads, aluminium oxide, steel grit, and silicon carbide.

6. Prepare your surrounding area to avoid an unnecessary mess. Sandblasting
accessories include a sandblasting cabinet that is used to contain the blasting
media and stops it from flying all over the work area.
 Place duct tape over the areas that are not to be blasted.
 Open the cabinet and place the item in the center while ensuring that it is
stable. Close the compartment.
 Ensure that any delicate surfaces are
removed from the direct working area
to avoid damage.
 Use protective covering for areas of
concern.

7. Blast off! Once you have prepared your equipment and surroundings, get started
with your project.
It is important to keep in mind that sandblasting is a process the requires
practice before being able to perform the task properly. It is always a good idea
to practice before you begin with a major project.
 Turn the sandblaster on using the switch
on the side.
 Place your hands into the glove openings
and pick up equipment.
 Use the lever on the top of the sandblaster’s
nozzle to start the process. Ensure that you
coat the object evenly, keeping the blaster six
to twelve inches away.

8. Here are a few top tips that will ensure that your restoration process is
successful:
 It's All in the Sand. With a variety of fine sand to choose from, ensure that
you select one that won’t warp metal, is reusable, and doesn’t clog up your
machine.
 Air Compressors. Air compressors are not made for blasting. Ensure that you
take periodic breaks within the process to prolong the use of your compressor.
 Which to Choose. Depending on your workload
and the type of work that you are doing, opt for
either a siphon or pressurized system to do the job.
Establish which process will be easier and more
effective to avoid excessive costs.

9. The main benefits of the sandblasting process are:
 Sandblasting saves time and is more efficient than using sandpaper.
 Old, faded surfaces are evenly removed and cleaned.
 Sandblasting allows you to access corners and
areas that are difficult to reach.
 Sandblasting is particularly well suited to the
removal of rust which causes property damage.
 Make use of sandblasting to preserve the use
and longevity of your metal pipes, furniture, and
fittings.

10. Located in Michigan, Big A's Place LLC stocks a variety
of sandblasting accessories and equipment for both
home and industrial use.
As a direct distributor and aftermarket supplier, Big A’s
is home to sandblasting cabinets, parts, and portable
sandblasting equipment, as well as a collection of
safety products such as helmets and breathing filters.
Brands include: Pirate Brand, Kennametal, Malyn
Ceramics, and Everblast.
If you are looking for top quality sandblasting accessories and
equipment, give us a call on (616) 741-9237 or visit us at
www.sandblaster-parts.com.