De Booosting activiteit Gevelinnovaties in transformaties vond plaats op de 2e dag van de beurs Gevel2020 op woensdag 29 januari. Hier de lezing Closed Cavity Façades van Hans Jansen van Scheldebouw/Permasteelisa.
Deze activiteit was onderdeel van het programma van Gevel-ambassadeur Joost Heijnis, bouwtechnoloog bij architectenbureau cepezed en oud-Booosting voorzitter.
meer info
h.jansen@permasteelisagroup.com
joost.heijnis@cepezed.nl
https://www.gevel-online.nl/
https://booosting.nl/event/show/id/329
Simulating the Performance of the Unique MicroLouvre™ for Low Energy Building...SimScale
SimScale teams up with Smartlouvre Technology Ltd. to demonstrate how simulation technology can be used to evaluate the performance of MicroLouvre, a woven mesh of paper-thin bronze louvres. This product is used externally on windows and building facades to block and absorb heat, and control glare. As the only one of its kind on the market, MicroLouvre provides an option for low energy building designers that improves the performance of glazing while still allowing for daylight and natural ventilation.
SimScale evaluated the performance of Microlouvre testing its structural properties against airflow, solar, and thermal data.
Achieving the Passive House criteria on a high-rise, concrete-framed building located in Vancouver, BC.
Presented at the 2017 NAPHN Conference and Expo by Eric Catania, M.Eng., BEMP, CPHD, LEED AP BD+C, PHI Accredited Passive House Certifier.
China Morn offer comprehensive architectural glass solutions Morn expand to vacuum glass industry,working with Leadus and supply vacuum glass worldwide
Simulating the Performance of the Unique MicroLouvre™ for Low Energy Building...SimScale
SimScale teams up with Smartlouvre Technology Ltd. to demonstrate how simulation technology can be used to evaluate the performance of MicroLouvre, a woven mesh of paper-thin bronze louvres. This product is used externally on windows and building facades to block and absorb heat, and control glare. As the only one of its kind on the market, MicroLouvre provides an option for low energy building designers that improves the performance of glazing while still allowing for daylight and natural ventilation.
SimScale evaluated the performance of Microlouvre testing its structural properties against airflow, solar, and thermal data.
Achieving the Passive House criteria on a high-rise, concrete-framed building located in Vancouver, BC.
Presented at the 2017 NAPHN Conference and Expo by Eric Catania, M.Eng., BEMP, CPHD, LEED AP BD+C, PHI Accredited Passive House Certifier.
China Morn offer comprehensive architectural glass solutions Morn expand to vacuum glass industry,working with Leadus and supply vacuum glass worldwide
CPD Presentation: Key considerations when specifying weather louvresColt UK
The purpose of our presentation is to highlight areas of consideration for both Architects and Service Engineers to ensure that specifications adequately reflect design requirements and performance expectations.
Moving Towards more Energy Efficient Wood-frame Building EnclosureRDH Building Science
In regards to newly stated implications of NBC section 9.36. The new building enclosure energy efficiency requirements under the NBC section 9.36 require increased emphasis on continuous insulation having higher effective R-values. It gives prescriptive airtightness requirements, minimum equipment efficiency in regards to HVAC duct sealing/insulation and domestic hot water.
Building Enclosures For the Future - Building Tomorrows Buildings TodayGraham Finch
Presentation from the 2015 Buildex Conference in Vancouver BC. Covers a brief review of recent energy and building code changes in BC along with compliance tips followed by an in-depth discussion of various highly insulated wall and roof assemblies that can be built to meet the new requirements. Cladding attachment strategies through exterior insulation are covered in great detail.
Booosting (platform voor koplopers in bouwinnovatie) organiseerde een aantal workshops om deze uitdaging aan te gaan. Eén van de innovatieve uitkomsten van de workshops is: geen afval en meer CO2-reductie door verbetering isolatieglas. We halen bestaand isolatieglas uit elkaar en reinigen het. Daarna voegen we een specifieke folie toe en bouwen we het geheel op tot triple glas! Het is de bedoeling dat het gehele upgrade-proces mobiel kan plaatsvinden. Daarom willen we twee vrachtwagens ombouwen tot een werkplaats om het triple glas overal ter plekke te kunnen maken. Een enthousiast team heeft inmiddels een eerste succesvolle praktijkproef uitgevoerd en Booosting bestuurslid Rutger Snoek is hierover ook geïnterviewd. Kijk voor meer info ook op www.booosting.nl.
De Booosting activiteit Goood Woood stond 5 maart in het teken van circulair bouwen met hout en werd gehost door de collega’s van cepezed in Delft. Na afloop van de expertlezingen was er een rondleiding in Bouwdeel D(emontabel) van cepezed.
Hier de presentatie Houtconstructies van Rob Doomen - Pieters Bouwtechniek Delft.
Aankondiging van deze activiteit:
https://booosting.nl/event/show/id/326
More Related Content
Similar to 200129 Booosting@Gevel2020 - Hans Jansen Scheldebouw
CPD Presentation: Key considerations when specifying weather louvresColt UK
The purpose of our presentation is to highlight areas of consideration for both Architects and Service Engineers to ensure that specifications adequately reflect design requirements and performance expectations.
Moving Towards more Energy Efficient Wood-frame Building EnclosureRDH Building Science
In regards to newly stated implications of NBC section 9.36. The new building enclosure energy efficiency requirements under the NBC section 9.36 require increased emphasis on continuous insulation having higher effective R-values. It gives prescriptive airtightness requirements, minimum equipment efficiency in regards to HVAC duct sealing/insulation and domestic hot water.
Building Enclosures For the Future - Building Tomorrows Buildings TodayGraham Finch
Presentation from the 2015 Buildex Conference in Vancouver BC. Covers a brief review of recent energy and building code changes in BC along with compliance tips followed by an in-depth discussion of various highly insulated wall and roof assemblies that can be built to meet the new requirements. Cladding attachment strategies through exterior insulation are covered in great detail.
Booosting (platform voor koplopers in bouwinnovatie) organiseerde een aantal workshops om deze uitdaging aan te gaan. Eén van de innovatieve uitkomsten van de workshops is: geen afval en meer CO2-reductie door verbetering isolatieglas. We halen bestaand isolatieglas uit elkaar en reinigen het. Daarna voegen we een specifieke folie toe en bouwen we het geheel op tot triple glas! Het is de bedoeling dat het gehele upgrade-proces mobiel kan plaatsvinden. Daarom willen we twee vrachtwagens ombouwen tot een werkplaats om het triple glas overal ter plekke te kunnen maken. Een enthousiast team heeft inmiddels een eerste succesvolle praktijkproef uitgevoerd en Booosting bestuurslid Rutger Snoek is hierover ook geïnterviewd. Kijk voor meer info ook op www.booosting.nl.
De Booosting activiteit Goood Woood stond 5 maart in het teken van circulair bouwen met hout en werd gehost door de collega’s van cepezed in Delft. Na afloop van de expertlezingen was er een rondleiding in Bouwdeel D(emontabel) van cepezed.
Hier de presentatie Houtconstructies van Rob Doomen - Pieters Bouwtechniek Delft.
Aankondiging van deze activiteit:
https://booosting.nl/event/show/id/326
De Booosting activiteit Goood Woood stond 5 maart in het teken van circulair bouwen met hout en werd gehost door de collega’s van cepezed in Delft. Na afloop van de expertlezingen was er een rondleiding in Bouwdeel D(emontabel) van cepezed.
Hier de presentatie Bouwdeel D(emontabel) Bouwdeel D(emontabel) ontwerp en bouwproces van Jan Houtekamer - directeur cepezedbouwteam.
Aankondiging van deze activiteit:
https://booosting.nl/event/show/id/326
De Booosting activiteit Goood Woood stond 5 maart 2020 in het teken van circulair bouwen met hout en werd gehost door de collega’s van cepezed in Delft. Na afloop van de expertlezingen was er een rondleiding in Bouwdeel D(emontabel) van cepezed.
Hier de presentatie Nieuwe houten bouwproducten van
Bas Meeuwissen - technisch adviseur Metsä Wood.
Aankondiging van deze activiteit:
https://booosting.nl/event/show/id/326
De Booosting activiteit Goood Woood stond 5 maart in het teken van circulair bouwen met hout en werd gehost door de collega’s van cepezed in Delft. Na afloop van de expertlezingen was er een rondleiding in Bouwdeel D(emontabel) van cepezed.
Hier de presentatie Circulair bouwen en Bouwdeel D(emontabel) van Menno Rubbens - directeur cepezedprojects.
Aankondiging van deze activiteit:
https://booosting.nl/event/show/id/326
De Booosting activiteit Goood Woood stond 5 maart 2020 in het teken van circulair bouwen met hout en werd gehost door de collega’s van cepezed in Delft. Na afloop van de expertlezingen was er een rondleiding in Bouwdeel D(emontabel) van cepezed.
Hier de presentatie Trends in circulair bouwen met hout van Mathew Vola - directeur Arup
Aankondiging van deze activiteit
https://booosting.nl/event/show/id/326
11 februari 2020 organiseerden Booosting en Si-X een projectbezoek naar het Co-Creation Centre. Het onderwerp van deze activiteit was De Booosting activiteit was structureel verlijmen en het gebruik van siliconen in de bouw.
Daags ervoor verscheen dit artikel in Cobouw: Volledig glazen paviljoen kan aanval met bulldozer weerstaan.
aankondiging van deze activiteit
https://booosting.nl/event/show/id/328
presentaties van deze activiteit https://booosting.nl/news/show/id/1356
Het Co-Creation Centre wordt nu gebouwd op The Green Village in Delft.
30 januari 2020 gaf Thijs Asselbergs op de beurs GEVEL2020 de presentatie Second Life, de architectuur van morgen, over "circular upcycle + re-design of façades".
Hoe kun je een aanpak maken om grote Rijksgebouwen en het grootse ziekenhuis van Nederland, het AMC, geschikt te maken voor 2050?
Thijs Asselbergs is hoogleraar Architectural Engineering op de TU Delft faculteit Bouwkunde.
11 februari 2020: Booosting activiteit over én in het in aanbouw zijnde Co-Creation Centre met draagstructuur van glas en siliconen.
Hier de tegenlezing van Rutger Snoek, bestuurslid Booosting en expert vastgoed Rijksvastgoedbedrijf.
Aankondiging van deze activiteit:
https://booosting.nl/event/show/id/328
11 februari 2020: Booosting activiteit over én in het in aanbouw zijnde Co-Creation Centre met draagstructuur van glas en siliconen.
Hier de presentatie Nieuwe ontwikkelingen van Siliconen in de bouw van Valérie Hayez, Global Façade Engineering - Dow Silicones België.
Aankondiging van deze activiteit:
https://booosting.nl/event/show/id/328
11 februari 2020: Booosting activiteit over én in het in aanbouw zijnde Co-Creation Centre met draagstructuur van glas en siliconen.
Hier de presentatie over het constructief ontwerp van Diana de Krom - projectleider constructies ABT.
Aankondiging van deze activiteit:
https://booosting.nl/event/show/id/328
11 februari 2020: Booosting activiteit over én in het in aanbouw zijnde Co-Creation Centre met draagstructuur van glas en siliconen.
Hier de presentatie over het technisch ontwerp en de uitvoering van Wout Hoogendoorn, directeur Si-X.
Aankondiging van deze activiteit:
https://booosting.nl/event/show/id/328
11 februari 2020: Booosting activiteit over én in het in aanbouw zijnde Co-Creation Centre met draagstructuur van glas en siliconen.
Hier de presentatie over het architectonisch ontwerp door
Armand Paardekooper Overman - architect/associate Mecanoo.
Aankondiging van deze activiteit:
https://booosting.nl/event/show/id/328
11 februari 2020: Booosting activiteit over én in het in aanbouw zijnde Co-Creation Centre met draagstructuur van glas en siliconen.
Hier het welkomstwoord van Hubert Linssen - programmamanager van The Green Village.
Aankondiging van deze activiteit:
https://booosting.nl/event/show/id/328
11 februari 2020: Booosting activiteit over én in het in aanbouw zijnde Co-Creation Centre met draagstructuur van glas en siliconen.
Hier de introductie van Booosting voorzitter Robert Capel – Saleslead Octatube
In 2017 startten de Hogescholen Saxion Enschede en Hanze Groningen Bouwtex, het onderzoek naar de mogelijkheden van textiel voor de bouw in het kader van renovatie en herbestemming van gebouwen.
Op 16 januari 2020 is het onderzoek afgerond op Hanze Groningen met de presentatie van twee prototypen voor flexibele binnenwanden in het onderwijs. Hier de presentatie van de groep olv docent onderzoeker Clemens Bernardt.
.
In 2017 startten de Hogescholen Saxion Enschede en Hanze Groningen Bouwtex, het onderzoek naar de mogelijkheden van textiel voor de bouw in het kader van renovatie en herbestemming van gebouwen.
Op 16 januari 2020 is het onderzoek afgerond op Hanze Groningen met de presentatie van twee prototypen voor flexibele binnenwanden in het onderwijs. Hier de presentatie van Atto Harsta en Rinke Feenstra van Aldus Bouwinnovatie: Meervoudig ruimtegebruik in een moderne leeromgeving.
In 2017 startten de Hogescholen Saxion Enschede en Hanze Groningen Bouwtex, het onderzoek naar de mogelijkheden van textiel voor de bouw in het kader van renovatie en herbestemming van gebouwen.
Op 15 januari 2020 is het onderzoek afgerond met een eindevent. Hier de presentatie over de kansen van het gebruik van textiel in de bouw van Christian Struck, lector Sustainable Building Technology Saxion: Potential of textiles for building renovation.
In 2017 startten de Hogescholen Saxion Enschede en Hanze Groningen Bouwtex, het onderzoek naar de mogelijkheden van textiel voor de bouw in het kader van renovatie en herbestemming van gebouwen.
Op 15 januari 2020 is het onderzoek afgerond met een eindevent. Hier de presentatie van studente Moeywadee Sakhun van een opvouwbare roomdivider van het nonwoven, kunststof vliesmateriaal Colback.
In 2017 startten de Hogescholen Saxion Enschede en Hanze Groningen Bouwtex, het onderzoek naar de mogelijkheden van textiel voor de bouw in het kader van renovatie en herbestemming van gebouwen.
Op 15 januari 2020 is het onderzoek afgerond met een eindevent. Hier de studentenpresentatie van een binnenwand met een modulair kliksysteem van 100% pet-vilt, Flexitex.
More from Booosting platform voor koplopers in bouwinnovatie (20)
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Neuro-symbolic is not enough, we need neuro-*semantic*Frank van Harmelen
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Generating a custom Ruby SDK for your web service or Rails API using Smithyg2nightmarescribd
Have you ever wanted a Ruby client API to communicate with your web service? Smithy is a protocol-agnostic language for defining services and SDKs. Smithy Ruby is an implementation of Smithy that generates a Ruby SDK using a Smithy model. In this talk, we will explore Smithy and Smithy Ruby to learn how to generate custom feature-rich SDKs that can communicate with any web service, such as a Rails JSON API.
14. Referentie projecten
Roche Diagnostics
Location: Rotkreuz, Switzerland
Client: Roche Diagnostics Ltd
Architect: Burckhardt + Partner AG
Year of Completion: 2010
Building Type: Office
Area: 8,200m²
15. Referentie projecten
UCLH
Location: London, United Kingdom
Client: University College London Hospital
Architect:Hopkins Architects
Year of Completion: 2012
Building Type: Hospital
Area: 2,500m²
16. Referentie projecten
Allianz Suisse
Location: Zurich, Switzerland
Client: Allreal Generalunternehmung AG
Architect: Wiel Arets Architects (WAA)
Year of Completion: 2013
Use: Mixed – Office / Residential
Area: 26,650m²
17. Referentie projecten
Floyd building (JTI
headquarters)
Location: Geneva, Switzerland
Client: Implenia Enterprise Generale SA
Architect: SOM & Burckhardt & Partner
Year of Completion: 2016
Building Type: Office
Area: 15,900m²
19. Referentie projecten
IQL building S5 and building
S6
Location: London, UK
Client: Lendlease Development
Architect: Rogers Stirk Harbour & Partners
Year of Completion: 2018
Building Type: Office
Area: 18,000m²
20. Referentie projecten
The Circle
Location: Zurich, Swiss
Client: Flughafen Zürich AG / Swiss Life AG
Architect: iken Yamamoto & Field Shop
Year of Completion: 2019
Building Type: Office
Area: 14,000m²