Concise know how from EMKA - Enclosure/Cabinet GasketingEMKA (UK) Ltd
EMKA UK describe the different materials used in their enclosure/cabinet gaskets, along with the applications, properties and chemical resistance for each type. This includes EPDM, CR Compounds, TPE Compounds and Silicone Rubber for standard industrial use, fire protection and hygiene applications.
The Institution opened a new specialist training centre in Sheffield Business Park on Tuesday 13 October at a special event attended by Institution President Professor Richard Folkson and the Lord Mayor of Sheffield, Councillor Talib Hussain.
The third presentation was given by Richard Green, Senior Corrosion and Painting Inspection Trainer. Richard detailed the training and certification around corrosion and what it entailed.
Concise know how from EMKA - Enclosure/Cabinet GasketingEMKA (UK) Ltd
EMKA UK describe the different materials used in their enclosure/cabinet gaskets, along with the applications, properties and chemical resistance for each type. This includes EPDM, CR Compounds, TPE Compounds and Silicone Rubber for standard industrial use, fire protection and hygiene applications.
The Institution opened a new specialist training centre in Sheffield Business Park on Tuesday 13 October at a special event attended by Institution President Professor Richard Folkson and the Lord Mayor of Sheffield, Councillor Talib Hussain.
The third presentation was given by Richard Green, Senior Corrosion and Painting Inspection Trainer. Richard detailed the training and certification around corrosion and what it entailed.
In this issue of surfaces magazine, we travel far and wide as we take a look at a range of projects from Australia to Sweden.
- See how our Chartek® passive fire protection has been used on a chemical plant for 10 years
- Discover how Korean shipyards are experiencing a newbuilding boom for offshore drill ships
- Find out how we are helping a Chinese local water authority to cut the cost of its concrete protection
Searching For Fire-Rated Walling System?shamusgarry
If you are searching for Fire-Rated Walling System, then your search end here at Dincel Construction System. We offer best quality fire-rated walling systems at affordable prices in Australia. For more information, visit http://www.dincelconstructionsystem.com/
Silver Fox is a UK owned, UK based business. Our approach is a little different; we don’t charge an annual software licence fee and we don’t charge for support. The automated web updates are free of charge. Because of this we can closely develop and evolve our labelling systems, ensuring our solutions deliver maximum time savings.
The end result – the printed labels – are long lasting and highly durable
Performance is backed by extensive independent testing (see individual data sheets)
Quality is reliable and consistent
Ex-Stock delivery
We provide safety flooring for transportation like bus flooring and many others. Responsive Industries gives many designs, great range of flooring many colours and easy to buy all over world.
Extreme Materials: Robust Performance from Cable to Connector – White Paper S...NorthwireCable
Aggregating decades of interconnectivity knowledge, Northwire, Inc. (NWI) along with its partner The LEMO Group, has released Part IV of their “Extreme Environments, Complex Requirements” white paper series, titled “Extreme Materials: Robust Performance from Cable to Connector.”
Technical Bulletin 0213 Polyisocyanurate vs. Cellular Glass InsulationJoe Hughes
This Technical Bulletin is another in our series of white papers aimed at providing our clients, engineers, specifiers, contractors, fabricators, and friends with objective information on our products and those of our competitors. This Bulletin focuses on a comparison of the physical properties of closed cell2 polyisocyanurate3 (polyiso or PIR) rigid foam insulation products with those of cellular glass insulation products for demanding below-ambient applications such as cryogenic, refrigerant, and chilled water where energy efficiency, moisture intrusion, and condensation are issues.
Taconic NF-30 for 77-79 GHz Safety and Reliability ApplicationsManfred Huschka
Due to the expected potential growth of 77/79 GHz ADAS (Advanced river-Assistance System) several non-PTFE (Polytetra Fluoro Ethylene) laminates are trying to find their way into designs. However from electrical and mechanical reliability points of view non-reinforced PTFE/Ceramic laminates still provide a leading edge
Customer Bulletin 0610 Polyisocyanurate vs. Cellular Glass InsulationJoe Hughes
This Customer Bulletin is another in our series of white papers aimed at providing our clients, engineers, contractors, fabricators, and friends with objective information on our products and those of our competitors. This Bulletin focuses on a comparison of the physical properties of closed cell polyisocyanurate (PIR or polyiso) rigid foam insulation with those of cellular glass insulation for below ambient applications such as chilled water through cryogenic application where moisture intrusion or condensation can be an issue.
Cross Technical Solutions is an Irish company Specialising in the design, Installation, Service and Maintenance of Specialist Refrigeration systems.
Established with the Pharmaceutical & Food Industry and specialist refrigeration fields in mind we can provide a complete ‘Turn-Key’ package using in-house engineers and the latest design and drawing packages.
In this issue of surfaces magazine, we travel far and wide as we take a look at a range of projects from Australia to Sweden.
- See how our Chartek® passive fire protection has been used on a chemical plant for 10 years
- Discover how Korean shipyards are experiencing a newbuilding boom for offshore drill ships
- Find out how we are helping a Chinese local water authority to cut the cost of its concrete protection
Searching For Fire-Rated Walling System?shamusgarry
If you are searching for Fire-Rated Walling System, then your search end here at Dincel Construction System. We offer best quality fire-rated walling systems at affordable prices in Australia. For more information, visit http://www.dincelconstructionsystem.com/
Silver Fox is a UK owned, UK based business. Our approach is a little different; we don’t charge an annual software licence fee and we don’t charge for support. The automated web updates are free of charge. Because of this we can closely develop and evolve our labelling systems, ensuring our solutions deliver maximum time savings.
The end result – the printed labels – are long lasting and highly durable
Performance is backed by extensive independent testing (see individual data sheets)
Quality is reliable and consistent
Ex-Stock delivery
We provide safety flooring for transportation like bus flooring and many others. Responsive Industries gives many designs, great range of flooring many colours and easy to buy all over world.
Extreme Materials: Robust Performance from Cable to Connector – White Paper S...NorthwireCable
Aggregating decades of interconnectivity knowledge, Northwire, Inc. (NWI) along with its partner The LEMO Group, has released Part IV of their “Extreme Environments, Complex Requirements” white paper series, titled “Extreme Materials: Robust Performance from Cable to Connector.”
Technical Bulletin 0213 Polyisocyanurate vs. Cellular Glass InsulationJoe Hughes
This Technical Bulletin is another in our series of white papers aimed at providing our clients, engineers, specifiers, contractors, fabricators, and friends with objective information on our products and those of our competitors. This Bulletin focuses on a comparison of the physical properties of closed cell2 polyisocyanurate3 (polyiso or PIR) rigid foam insulation products with those of cellular glass insulation products for demanding below-ambient applications such as cryogenic, refrigerant, and chilled water where energy efficiency, moisture intrusion, and condensation are issues.
Taconic NF-30 for 77-79 GHz Safety and Reliability ApplicationsManfred Huschka
Due to the expected potential growth of 77/79 GHz ADAS (Advanced river-Assistance System) several non-PTFE (Polytetra Fluoro Ethylene) laminates are trying to find their way into designs. However from electrical and mechanical reliability points of view non-reinforced PTFE/Ceramic laminates still provide a leading edge
Customer Bulletin 0610 Polyisocyanurate vs. Cellular Glass InsulationJoe Hughes
This Customer Bulletin is another in our series of white papers aimed at providing our clients, engineers, contractors, fabricators, and friends with objective information on our products and those of our competitors. This Bulletin focuses on a comparison of the physical properties of closed cell polyisocyanurate (PIR or polyiso) rigid foam insulation with those of cellular glass insulation for below ambient applications such as chilled water through cryogenic application where moisture intrusion or condensation can be an issue.
Cross Technical Solutions is an Irish company Specialising in the design, Installation, Service and Maintenance of Specialist Refrigeration systems.
Established with the Pharmaceutical & Food Industry and specialist refrigeration fields in mind we can provide a complete ‘Turn-Key’ package using in-house engineers and the latest design and drawing packages.
The Airex Pro-System Kit is a 2-In-1 system that combines air-tight sealing w/ a wall-mounted piping outlet & UV/Vapor Retarder piping insulation protector for exterior applications of #HVAC refrigerant piping penetrations & outdoor insulation. http://www.airexmfg.com/prosystem
The Airex Pro-System Kit is a 2-In-1 system that combines air-tight sealing w/ a wall-mounted piping outlet & UV/Vapor Retarder piping insulation protector for exterior applications of #HVAC refrigerant piping penetrations & outdoor insulation. http://www.airexmfg.com/prosystem
Saving energy with insulation.
A decisive role in modern process guidance for reducing energy consumption is played by the insulating materials used in every refractory lining.
As invisible but important components in every refractory lining, high-temperature insulating materials reduce the lining's thermal profile and thereby protect the furnace's steel shell from excesive heating effects.
With our newly developed PROLITE®, we offer our customers a highly insulating material made of biogenic silicilic acid, which combines these factors in a sustainable way.
Pressure Sensitive Tapes for Building and Construction Industry.
Leading self dhesive solutions that meet the needs and requirements of every sector within the Building and Construction Market.
You may Download this Presentation on :
Click :
You are Welcome to watch this presentation on our YouTube channel as well :
Click : https://www.youtube.com/channel/UCgovR9rsYHWKLzdg4N5eLSQ?view_as=subscriber
Slip on fit - quick & easy to install connectors
Touchproof cable termination- fully screened connectors for safety
One part cable termination - built-in stress relief
Maintenance friendly - readily disconnectable
Nexans Euromold screened separable connectors and elbows are used to terminate highNexans Euromold Connectors voltage cables with polymeric insulation (XLPE & EPR) onto switchgear and transformer bushings up to 33kV. Screened separable connectors are also known as screened elbows or tee connectors. 2 types of connector are available i) Deadbreak : connector cannnot be connected/disconnected when energised ii) Loadbreak.
Euromold bushings are available for high voltage oil, air and gas insulated switchgear and transformers to CENELEC EN50180 and ANSI IEEE 386 standards.
Nexans Euromold Cable Connectors
Nexans Euromold manufacture 11kV-33kV pre-moulded EPDM separable elbow connectors, heat shrink cable joints and cable terminations, cold shrink cable joints and cable terminations and epoxy bushings for high voltage switchgear and transformers. Euromold cable accessories meet CENELEC HD929.1, CENELEC EN50180, IEC 137, IEEE 386 & 404. A screened cable connector is an encapsulated, safe to touch high voltage cable termination used to connect HV cables to the epoxy bushings of high voltage electrical equipment including transformers, switchgear and motors.
Advantages of Nexans Euromold HV Cable Connector Systems
No minimum distances required - suitable for compact HV substations
Safe to touch accidentally when energised
Maintenance free HV cable connectors and terminations
Quick and easy to install connectors by trained cable jointers
Fully watertight cable terminations - IP67 ingress protection
Complete cable connector ranges for 11kV to 33kV cable connections
Connectors suitable for outdoor cable termination without cable box
Tee connectors can be piggy-backed to allow multiple cable connections onto bushings
OverTec is a low pressure overmoulding system that positions between high pressure short cycle time processes for mass production and gravity fed, long cycle time processes for short runs and prototypes. It is a very cost effective way to seal and protect electronic components. Popular applications include connector potting, overmoulding PCBs, making electric cable glands, providing strain relief on cables and protecting sensors.
Ametalin CeaseFire™ - non-combustible, weather-proofing and vapour management...Ametalin
Ametalin are excited to announce the launch of CeaseFire™. The ultimate non-combustible weather-proofing and vapour management membrane for NCC fire-resisting systems in Australian buildings.
FRP for masonry, stone, flat/curved arch terracotta and cindercrete stabilization with a Class A Fire Rating for interior, exterior, and above or below grade (wet) applications.
When specified correctly fire protection materials
preserve property and can save lives. With so many
products available and so much at stake, gaining
expert advice on choosing the right products is vital
Bonding solutions for assembly operations - Market brochure
Thermobreak Sheet - Brochure 020914 D
1. Thermal Insulation
PHYSICALLYC R O S S L I N K E D
S E K I S U I T E C H N O L O G Y
PHYSICALLYC R O S S L I N K E D
S E K I S U I T E C H N O L O G Y
Closed Cell Physically crosslinked
polyolefin foam insulation
2. 2
Thermobreak®
is the leading and most innovative polyolefin foam thermal insulation available to the HVAC and Building industry
worldwide. Thermobreak’s performance is unsurpassed.
Thermobreak®
thermal insulation is an all-in-one closed cell physically crosslinked polyolefin foam that is manufactured in
compliance to ASTM C1427 Standard.
Thermobreak®
was developed in Australia and has sold worldwide for over 20 years. The revolutionary insulation product has a
factory applied reinforced foil facing and adhesive backing. Thermobreak®
enables much faster installation and eliminates many
errors and limitations encountered when using older insulation technology.
Thermobreak®
is manufactured using our proprietary physically crosslinked polyolefin foam technology, invented and
commercialised by the Sekisui Chemical group in Japan. The technology allows crosslinking of the polyolefin without the use of
chemical agents. Instead the Sekisui process utilises clean and precise crosslinking through irradiation (physical) means.
Sekisui has been manufacturing crosslinked polyolefin foams since 1967. Today Sekisui Foam division is the largest and leading
crosslinked polyolefin foam manufacturer in the world operating 10 foam factories located in Europe, USA, Thailand, Japan, Korea,
and Australia.
Our commitment to quality and the protection of the environment is embodied by our operations all being certified to both the ISO
9001 Quality Assurance and ISO 14001 Environmental standards.
Setting the Standard
PHYSICALLYC R O S S L I N K E D
S E K I S U I T E C H N O L O G Y
PHYSICALLYC R O S S L I N K E D
S E K I S U I T E C H N O L O G Y
3. Sidra Hospital Doha, Qatar
M&E Consultant KEO International
Marriott Hotel Abu Dhabi, UAE
M&E Consultant Herberger Engineers
Sama Beirut, Lebanon
M&E Consultant ERGA Group
4. 4
Technically Superior
Our unique physically crosslinked technology results in a smaller and more evenly distributed cell structure. Cell structure
directly affects thermal conductivity and vapour permeability. Both are key factors in insulation performance.
THICKNESS
(m)
AREA
(m2
)
THERMAL ENERGY
(W)
THERMAL
CONDUCTIVITY
RATE
(W-K-m)
TEMPERATURE DIFFERENCE
△T=T1
-T2
(K)
TEMPERATURE2
(K)
TEMPERATURE1
(K)
Thermal Conductivity: 0.032 W/mK (230
C) is the lowest
of any flexible insulation material. On equivalent thickness
basis, Thermobreak®
provides up to 18% better insulation
than elastomeric and chemically crosslinked foams.
Vapour Permeability of almost zero ensures our thermal
conductivity remains relatively constant for a period of 10
years thus significantly contributing to building sustainability
and energy cost reduction.
Building Sustainability, Energy Efficiency, Indoor Air Quality and Health & Safety, are all key
elements embodied in the Green Building concept.
Green buildings are designed to reduce the overall impact of the built environment on human
health and the natural environment through energy efficiency, protecting occupant health,
improving employee productivity, and reducing waste, pollution and environmental degradation.
Central to the green building concept is thermal insulation. Thermobreak®
insulation is
manufactured to support and comply with such initiatives and enables credit point accumulation
through various building accreditation systems such as LEED and Estidama.
> Green Star Compliant (VOC)
> No CFCs or HCFCs
> Zero Ozone Depletion Potential
(Montreal Protocol)
> Low GWP
> Superior thermal insulation
Energy Efficiency & Building Sustainability
> Relatively constant thermal conductivity over a 10 year period
> Zero PVC, Zero Formaldehyde
> Compliance to RoHS Directive
> Compliance to REACH Directive
> Resistance to Mould Growth
> Non-Allergenic Properties
Third Party Certification & Testing
Thermobreak®
is third party certified ensuring that our stated technical specifications and test results are third party verified
through factory inspection, audit and sample preparation. All our product testing is performed with ISO Certified
laboratories ensuring testing integrity and verification.
Vapour Permeability = 8.19 x 10-15
Kg/Pa.s.m
Permeability Resistance Factor: µ > 20,000
17025
5. 5
Burj Residences Dubai, UAE
M&E Consultant Holfrord Associates
Palm Twin Towers Doha, QATAR
M&E Consultant MZ & Partners
Lim Tower HCMC, Vietnam
M&E Consultant CASA (HK)
Zuellig Building Manila, Philippines
First LEED Platinum building in the Philippines
M&E Consultant Meinhardt Philippines
Binh Tuong Political Centre, Vietnam
M&E Consultant : CPG Vietnam
6. Dubai Marriott Hotel Al Jaddaf, Dubai, UAE
M&E Consultant CKR Consulting Engineers
Qatar Petroleum (QP) Plaza Doha, Qatar
M&E Consultant KEO International
Movenpick Hotel Bangalore, India
M&E Consultant Sankalpa Tech
Royal Adelaide Hospital Adelaide, South Australia
M&E Consultant Lehr Consultants Intl.
7. 7
Complete Range for your HVAC Insulation Needs
Thermobreak®
is available in a complete range to cover typical HVAC requirements:
> Thermobreak®
Sheet (duct and large pipes, underslab)
> Thermobreak Tube®
(preformed tube up to 10’ IPS (273mm ID) and 50mm wall thickness
> Thermobreak NO CLAD®
®
- Sheet and pipe insulation for external applications and heavy duty traffic areas
> Thermobreak Acoustiplus- Fibre free acoustic liner with factory applied acrylic adhesive
Proven Reliability for Over 20 Years
With Thermobreak®
installed in over 600 projects worldwide, our experience and results speak for themselves.
Tested and proven and in a variety of climatic conditions Thermobreak®
has established an enviable reputation as a quality,
reliable, closed cell insulation performing flawlessly and delivering significant energy savings to building owners and operators.
Technical Support & Distribution Network
Backed by the technical expertise of Sekisui, a global multinational, our commitment and technical support to our customers
is unrivalled. Our office locations throughout Asia Pacific, India and the Middle East provide technical support to our customers
and distributors.
This includes our ThermaCalc®
thickness selection software, heat flow and temperature profile analysis software, a series of
Technical Information Bulletins for M&E professionals, detailed Installation Instructions and full set of third party certificates.
Our extensive distribution network ensures that materials are locally available at all times.
Thermobreak®
is supplied with factory applied reinforced aluminium foil facing and
repositionable acrylic tissue adhesive system. Our materials are of the highest quality.
Our aluminium foil facing is reinforced providing additional physical protection to
the insulation and at the same time reducing heat flow.
Thermobreak®
is the only material that uses tissue interlayer based adhesive
system. Unlike conventional direct coated adhesives, our system ensures that the
adhesive provides 100% coverage on the duct surface and on the foam insulation.
This feature also provides the additional benefit of repositionability, an essential
requirement during installation. The insulation can be lifted off the duct numerous
times during alignment without tearing the insulation.
In keeping with current green building trends and demands such as indoor air quality,
our adhesive system is low VOC (Green Star) compliant and offers credit points for
building ratings systems such as LEED and Estidama.
Quality Materials Engineered to Last
Compliance to International Fire & Smoke Standards
Thermobreak®
has been tested and complies to International Fire and Smoke Standards including
> BRITISH (BS)
> ASTM
> AUSTRALIAN (AS)
> ISO
Our testing regime includes various thicknesses in the range to ensure safety across all thickness used in projects. It is the only
polyolefin foam based sheet insulation to achieve FM Approval to FM4924, a demanding large scale room corner fire test.
For your nearest distributor please consult our website.
> European (EN)