1d. Mass Spectrometer Powerpoint
•Download as PPT, PDF•
1 like•2,020 views
The document describes a 5 step mass spectrometry process where 1) a sample is vaporized, 2) the vapor is ionized by an electron gun, 3) the ions are accelerated and focused by an electric field, 4) the ions are deflected by a magnetic field, and 5) the ions are detected by an ion counter.
Report
Share
Report
Share
Recommended
080 intravascular micro bolometer catheter
This document provides information about infrared detection technology, including the principles of blackbody radiation, emissivity, and Planck's radiation law. It discusses different types of infrared detectors such as photon detectors, which require cooling, and thermal detectors, whose output depends on temperature changes from absorbed radiation. Examples of applications for infrared detectors include medical diagnosis, security/surveillance, and condition monitoring. The document also summarizes infrared imaging and different detector technologies.
Golay cell
A Golay cell is a temperature sensor that detects terahertz radiation. It works by using the expansion of xenon gas inside a sealed metal cylinder when heated by absorbed radiation to deform a flexible diaphragm. This motion is detected with a photocell and converted to an electrical signal proportional to radiation intensity. Golay cells can operate at room temperature, are sensitive detectors of broad spectrum terahertz radiation, and are used in applications like medical imaging and security scanning that take advantage of terahertz properties like penetration of materials.
HPS Neutron Meter presentation(updated)
1) The document discusses various types of neutron detectors, their detection principles, energy response characteristics, and challenges in accurately measuring neutron dose equivalent rates. It focuses on REM balls but also covers other technologies like TEPC, mixed gas detectors, and CLYC.
2) Key points covered include how detector response varies with neutron energy spectrum, factors of over or under response depending on energy, and importance of characterizing the neutron field energy spectrum. It also highlights challenges in accounting for directionality and mixed gamma/neutron exposures.
3) Newer portable neutron detectors like mixed gas, Domino, and CLYC provide alternatives to REM balls and aim to improve gamma rejection, energy response, and form factor for radiological
Chapter 3 detection devices
This document discusses various types of radiation detection devices, including film badges, ionization chambers, Geiger-Muller counters, proportional counters, scintillation counters, photographic plates, electroscopes, bubble chambers, solid-state detectors, cloud chambers, and spark counters. Each detection method works by using different processes like ionization, fluorescence, or track visualization to detect and sometimes quantify radiation levels or particle energy. Regular monitoring of radiation is important for safety when working with radioactive materials.
Thermal detectors of ir
Thermal detectors contain a small active element that absorbs radiation and experiences a temperature change. The temperature change is inversely proportional to the exposed surface area of the element. There are several types of thermal detectors including thermocouples, thermistors, and pneumatic devices like the Golay cell. Thermocouples use two dissimilar metals where radiation heats the junction and creates a potential difference. Thermistors are made of materials with resistance highly dependent on temperature. Pyroelectric detectors contain non-centrosymmetric crystals that generate an electric field in response to temperature change rate. The Golay cell consists of a gas-filled cylinder with a flexible diaphragm that deforms in response to pressure changes
High Resolution X-ray Spectroscopy using Iridium-Gold Phase Transition
An iridium/gold phase transition thermometer was used in a microcalorimeter to achieve high-resolution X-ray spectroscopy. The microcalorimeter demonstrated an energy resolution of 15.5 eV when measuring the 55Mn Kα1 X-ray line, showing potential for applications in astroparticle physics and analytical X-ray systems. The thermometer operates based on the temperature-dependent resistance of an iridium/gold bilayer film near its superconducting phase transition. Energy deposited by X-rays is measured as a temperature change in the thermometer, which is read out using SQUID amplification. Further improvements could yield even higher resolution and count rates suitable for applications including dark matter searches and s
Nuclear i nstrumentation
Nuclear radiation detectors function by detecting nuclear particles or radiation using two main principles: ionization and excitation of atoms. There are two main types of radiation detectors: gas-filled detectors like ionization chambers which measure ionization produced in a gas, and scintillation counters which use a scintillator material to produce light pulses from incident radiation that are then converted to electrical signals. Common radiation detectors include Geiger-Muller tubes, which use a gas-filled tube and high voltage to produce a cascade of ion pairs to detect radiation, and scintillation counters, which use a scintillator and photomultiplier tube to convert radiation interactions into light and then an electrical signal.
Recommended
080 intravascular micro bolometer catheter
This document provides information about infrared detection technology, including the principles of blackbody radiation, emissivity, and Planck's radiation law. It discusses different types of infrared detectors such as photon detectors, which require cooling, and thermal detectors, whose output depends on temperature changes from absorbed radiation. Examples of applications for infrared detectors include medical diagnosis, security/surveillance, and condition monitoring. The document also summarizes infrared imaging and different detector technologies.
Golay cell
A Golay cell is a temperature sensor that detects terahertz radiation. It works by using the expansion of xenon gas inside a sealed metal cylinder when heated by absorbed radiation to deform a flexible diaphragm. This motion is detected with a photocell and converted to an electrical signal proportional to radiation intensity. Golay cells can operate at room temperature, are sensitive detectors of broad spectrum terahertz radiation, and are used in applications like medical imaging and security scanning that take advantage of terahertz properties like penetration of materials.
HPS Neutron Meter presentation(updated)
1) The document discusses various types of neutron detectors, their detection principles, energy response characteristics, and challenges in accurately measuring neutron dose equivalent rates. It focuses on REM balls but also covers other technologies like TEPC, mixed gas detectors, and CLYC.
2) Key points covered include how detector response varies with neutron energy spectrum, factors of over or under response depending on energy, and importance of characterizing the neutron field energy spectrum. It also highlights challenges in accounting for directionality and mixed gamma/neutron exposures.
3) Newer portable neutron detectors like mixed gas, Domino, and CLYC provide alternatives to REM balls and aim to improve gamma rejection, energy response, and form factor for radiological
Chapter 3 detection devices
This document discusses various types of radiation detection devices, including film badges, ionization chambers, Geiger-Muller counters, proportional counters, scintillation counters, photographic plates, electroscopes, bubble chambers, solid-state detectors, cloud chambers, and spark counters. Each detection method works by using different processes like ionization, fluorescence, or track visualization to detect and sometimes quantify radiation levels or particle energy. Regular monitoring of radiation is important for safety when working with radioactive materials.
Thermal detectors of ir
Thermal detectors contain a small active element that absorbs radiation and experiences a temperature change. The temperature change is inversely proportional to the exposed surface area of the element. There are several types of thermal detectors including thermocouples, thermistors, and pneumatic devices like the Golay cell. Thermocouples use two dissimilar metals where radiation heats the junction and creates a potential difference. Thermistors are made of materials with resistance highly dependent on temperature. Pyroelectric detectors contain non-centrosymmetric crystals that generate an electric field in response to temperature change rate. The Golay cell consists of a gas-filled cylinder with a flexible diaphragm that deforms in response to pressure changes
High Resolution X-ray Spectroscopy using Iridium-Gold Phase Transition
An iridium/gold phase transition thermometer was used in a microcalorimeter to achieve high-resolution X-ray spectroscopy. The microcalorimeter demonstrated an energy resolution of 15.5 eV when measuring the 55Mn Kα1 X-ray line, showing potential for applications in astroparticle physics and analytical X-ray systems. The thermometer operates based on the temperature-dependent resistance of an iridium/gold bilayer film near its superconducting phase transition. Energy deposited by X-rays is measured as a temperature change in the thermometer, which is read out using SQUID amplification. Further improvements could yield even higher resolution and count rates suitable for applications including dark matter searches and s
Nuclear i nstrumentation
Nuclear radiation detectors function by detecting nuclear particles or radiation using two main principles: ionization and excitation of atoms. There are two main types of radiation detectors: gas-filled detectors like ionization chambers which measure ionization produced in a gas, and scintillation counters which use a scintillator material to produce light pulses from incident radiation that are then converted to electrical signals. Common radiation detectors include Geiger-Muller tubes, which use a gas-filled tube and high voltage to produce a cascade of ion pairs to detect radiation, and scintillation counters, which use a scintillator and photomultiplier tube to convert radiation interactions into light and then an electrical signal.
Ir detectors
This document discusses different types of infrared detectors, including thermal and quantum detectors. It provides details on thermal detectors such as thermocouples, bolometers, and pneumatic cells which detect infrared radiation by measuring the heating effect. Specifically, it describes how thermocouples generate a potential difference from heating a junction of dissimilar metals, and how pneumatic cells measure infrared intensity through the expansion of gas in a sealed chamber upon heating.
Uv spectroscopy
UV spectroscopy is a technique that uses ultraviolet light to analyze compounds. It works by measuring how much UV light is absorbed by a sample at different wavelengths. The amount of absorption depends on characteristics of the compound like its structure and bonds. UV spectroscopy is used in clinical labs and research to identify unknown compounds, determine compound purity, and study properties like double bonds and functional groups. It provides information about electronic transitions in molecules.
Scintillation Counter and Semiconductor Detector
Scintillation Counter and Semiconductor DetectorSri Ramakrishna Mission Vidyalaya College of Arts and Science,Coimbatore-20.
There are lot of instruments are used to detect the radiation.these two are widely used to detect the radiationThermal neutron flux distribution by using BF-3 counter
To determine thermal flux distribution flux for Am-Be source and source strength for same source with BF3 counter
To determine thermal flux distribution for Am-Be source moderated with water.
To calculate source strength for same source
Flame emission spectroscopy
Flame emission spectroscopy involves nebulizing a sample solution into a flame where it is vaporized and atomized. Atoms are excited by thermal collisions in the flame and emit radiation of characteristic wavelengths when returning to lower energy states. A monochromator selects the desired wavelength which is measured by a detector. This technique is used to qualitatively and quantitatively analyze samples for alkali and alkaline earth metal content. It provides a simple, fast analysis but has limitations such as spectral interferences and inability to detect non-metals.
Gorgeous
This document discusses various methods for temperature measurement. It outlines liquid-in-glass thermometers, which measure the expansion of liquid in a glass tube. Bimetallic thermometers use the differing expansion rates of two metals joined together. Electrical thermometers rely on the temperature dependence of a material's resistance. Infrared thermometers measure the thermal radiation emitted by an object. Pyrometers compare an object's radiation to that of a reference source to determine temperature without contact.
Atomic absorption spectrometer 13.4.17
The document describes the components and operating principles of an atomic absorption spectrometer. Key components include radiation sources like hollow cathode lamps, a flame atomizer to convert liquid samples into atoms, and a monochromator and detector to measure atomic absorption. Standards of known concentration are used to calibrate the instrument, which can then determine unknown concentrations of metals in liquid samples by correlating absorption measurements to the calibration curve. The technique is useful for quantitative multi-element analysis in fields like chemistry, metallurgy, and environmental testing.
Gm counter
The document summarizes a seminar on the Geiger-Muller (G-M) counter. It describes the G-M counter as a device invented in 1928 that uses a gas-filled tube to detect alpha, beta, and gamma radiation. When radiation enters the tube, it ionizes the gas molecules, producing a pulse of current between electrodes that is counted. The document discusses the construction, working principle, advantages, and applications of the G-M counter.
Infrared detector
An infrared detector is a device that detects infrared radiation. There are two main types - thermal detectors and photodetectors. Thermal detectors detect changes in temperature from infrared radiation, while photodetectors use semiconductors to directly detect photons. Infrared radiation was discovered in 1800 and has wavelengths longer than visible light. Infrared detectors work based on Planck's radiation law, Stephan Boltzmann law, and Wein's displacement law. They have applications in night vision, astronomy, tracking, art restoration, and more due to advantages like long battery life, reliability in day/night, and not requiring contact with detected objects.
Scintillations principle, working, merits & demerits & applications
Scintillation counter - instrumentation Principle, working, advantages and disadvantages and applications on various fields.
Reference : principles of biochemistry by wilson and walker.
Basic Principles of Radiation Thermometry and Thermometer Calibrations
This document provides an overview of radiation thermometry and calibration of radiation thermometers. It begins with definitions of blackbody radiation and emissivity. It then describes the components and design considerations of spectral radiation thermometers. The document discusses factors to consider for non-contact temperature measurements such as suitable target-sensor distance. It also covers detector types, advantages of radiation thermometers, and common calibration methods including fixed point calibration and spectral responsivity measurement. Finally, it identifies uncertainty sources that can affect the accuracy of radiation thermometer calibrations.
Atomic absorption spectroscopy ppt
Atomic absorption spectroscopy is a technique used to determine the concentration of trace metals in liquid samples. It works by measuring the absorption of light by ground state atoms in a flame. The sample is atomized in the flame and specific elements absorb light from a hollow cathode lamp emitting their characteristic wavelength. The amount of light absorbed is measured and the concentration of the element determined using a calibration curve. AAS is a sensitive and selective method used widely in fields like environmental analysis, food testing, and clinical analysis to determine concentrations of metals like sodium, calcium, lead and zinc.
Flame photometer
This document provides an overview of flame photometry, which is a technique used to determine the concentration of certain metal ions like sodium, potassium, calcium, and lithium. It describes the basic components and working of a flame photometer, including the nebulizer, burner, optical system, and photodetector. When a sample solution containing metal ions is introduced into the flame, the ions absorb energy and emit light of characteristic wavelengths. The intensity of emitted light can then be used for quantitative analysis of metal ion concentrations. Some applications mentioned are analysis of soils, fertilizers, drinks and other samples. Advantages include low cost and sensitivity down to ppm and ppb levels, while limitations are inability to detect non-radiating
Ftir, ndir and flame photometry
FTIR, NDIR, and flame photometry are spectroscopic techniques. FTIR uses a Michelson interferometer to shine various wavelengths of light at once on a sample to obtain infrared absorption data via Fourier analysis. NDIR measures the difference in infrared light absorption between a sample gas and a reference gas to determine concentrations. Flame photometry vaporizes metal salt solutions in a flame and analyzes the characteristic emission spectra of metals like potassium, lithium, calcium, sodium, and barium to detect their presence.
Flame photometry
Flame photometry is a technique that uses the characteristic wavelengths of light emitted from atoms excited in a flame to determine the concentration of certain metal ions in solutions. When a sample containing metal ions is introduced into a flame, the ions are atomized and excited to emit light of distinct wavelengths. The intensity of light emitted is directly proportional to the concentration of the metal ion in the sample. Common metal ions that can be analyzed using this technique include sodium, potassium, lithium, and calcium. Interferences from other ions may affect the results. Modern flame photometers use nebulizers to atomize samples, monochromators to select wavelengths, and detectors to measure light intensities.
Geiger muller counter
The document is a presentation about the Geiger-Muller counter given by Avinash Dhawal to Mr. Sudhir Bhardhwaj. It discusses the history, development, principle, and applications of the Geiger-Muller counter. The Geiger-Muller counter detects ionizing radiation such as alpha, beta, and gamma rays using ionization produced in a Geiger-Muller tube. It was originally developed in 1908 and an advanced model capable of detecting all radiation types was developed in 1928 by Geiger and Muller.
Flame photometer
Flame photometry is a technique that uses a flame photometer instrument to determine the concentration of certain metal ions like sodium, potassium, calcium, and lithium present in a sample. The instrument works by nebulizing the sample solution into a flame, which excites the metal ions. As the ions return to the ground state, they emit light at characteristic wavelengths. A photodetector then measures the light intensities, which correspond to the metal ion concentrations in the original sample. Flame photometry has applications in clinical analysis of body fluids and agricultural soil analysis.
Flame photometer, Atomic Absorbtion Spectrophotometer
This document discusses flame photometry and atomic absorption spectrophotometry. It begins by defining these techniques and their components. Flame photometry uses the characteristic colors emitted from flames to identify and quantify metal ions like sodium, potassium, and lithium. Atomic absorption spectrophotometry measures light absorption by atomized metal ions in a flame. The document then covers the principles, instrumentation, interferences, applications, and quality control of flame photometry.
Nuclear detectors
This document discusses different types of radiation detectors used for dosimetry. It begins by defining radiation and the different types. It then discusses dosimetry, including common dosimetric quantities like activity, exposure, and absorbed dose. The main types of radiation detectors covered are gas-filled detectors like ionization chambers and Geiger-Müller counters, as well as scintillation counters. Ionization chambers detect radiation by ionizing gas molecules, while GM counters amplify this signal. Scintillation counters use a scintillator to convert radiation into light, which is then converted to an electrical signal.
19. Coronary Heart Disease
The document provides instructions for a lesson plan on coronary heart disease. It includes tasks for students such as reading about how blood circulates, writing a letter explaining this to a physician, answering questions about arteries becoming narrowed, listing risk factors for heart attacks, and watching videos labeling a heart diagram. The objectives are to explain heart attacks and associated risks and how to reduce them.
9. Effects of Smoking on Health
This document provides objectives and ideas for creating educational materials about the harms of smoking. It suggests designing a poster or leaflet to persuade children not to start smoking or illustrate smoking's effects on the body. It then lists several harmful effects of smoking, including damage to the lungs' alveoli - the tiny air sacs where oxygen and carbon dioxide are exchanged. The alveoli walls are extremely thin, making them vulnerable to chemicals in tobacco smoke.
28. global warming
John Bailar, an American chemist born on May 13, 1904, discovered that inorganic compounds could exist as isomers, where compounds have the same chemical composition but different structural formulas. Bailar is recognized as the "father of American coordination chemistry". Isomers are compounds with the same chemical composition that have different structural formulas.
More Related Content
What's hot
Ir detectors
This document discusses different types of infrared detectors, including thermal and quantum detectors. It provides details on thermal detectors such as thermocouples, bolometers, and pneumatic cells which detect infrared radiation by measuring the heating effect. Specifically, it describes how thermocouples generate a potential difference from heating a junction of dissimilar metals, and how pneumatic cells measure infrared intensity through the expansion of gas in a sealed chamber upon heating.
Uv spectroscopy
UV spectroscopy is a technique that uses ultraviolet light to analyze compounds. It works by measuring how much UV light is absorbed by a sample at different wavelengths. The amount of absorption depends on characteristics of the compound like its structure and bonds. UV spectroscopy is used in clinical labs and research to identify unknown compounds, determine compound purity, and study properties like double bonds and functional groups. It provides information about electronic transitions in molecules.
Scintillation Counter and Semiconductor Detector
Scintillation Counter and Semiconductor DetectorSri Ramakrishna Mission Vidyalaya College of Arts and Science,Coimbatore-20.
There are lot of instruments are used to detect the radiation.these two are widely used to detect the radiationThermal neutron flux distribution by using BF-3 counter
To determine thermal flux distribution flux for Am-Be source and source strength for same source with BF3 counter
To determine thermal flux distribution for Am-Be source moderated with water.
To calculate source strength for same source
Flame emission spectroscopy
Flame emission spectroscopy involves nebulizing a sample solution into a flame where it is vaporized and atomized. Atoms are excited by thermal collisions in the flame and emit radiation of characteristic wavelengths when returning to lower energy states. A monochromator selects the desired wavelength which is measured by a detector. This technique is used to qualitatively and quantitatively analyze samples for alkali and alkaline earth metal content. It provides a simple, fast analysis but has limitations such as spectral interferences and inability to detect non-metals.
Gorgeous
This document discusses various methods for temperature measurement. It outlines liquid-in-glass thermometers, which measure the expansion of liquid in a glass tube. Bimetallic thermometers use the differing expansion rates of two metals joined together. Electrical thermometers rely on the temperature dependence of a material's resistance. Infrared thermometers measure the thermal radiation emitted by an object. Pyrometers compare an object's radiation to that of a reference source to determine temperature without contact.
Atomic absorption spectrometer 13.4.17
The document describes the components and operating principles of an atomic absorption spectrometer. Key components include radiation sources like hollow cathode lamps, a flame atomizer to convert liquid samples into atoms, and a monochromator and detector to measure atomic absorption. Standards of known concentration are used to calibrate the instrument, which can then determine unknown concentrations of metals in liquid samples by correlating absorption measurements to the calibration curve. The technique is useful for quantitative multi-element analysis in fields like chemistry, metallurgy, and environmental testing.
Gm counter
The document summarizes a seminar on the Geiger-Muller (G-M) counter. It describes the G-M counter as a device invented in 1928 that uses a gas-filled tube to detect alpha, beta, and gamma radiation. When radiation enters the tube, it ionizes the gas molecules, producing a pulse of current between electrodes that is counted. The document discusses the construction, working principle, advantages, and applications of the G-M counter.
Infrared detector
An infrared detector is a device that detects infrared radiation. There are two main types - thermal detectors and photodetectors. Thermal detectors detect changes in temperature from infrared radiation, while photodetectors use semiconductors to directly detect photons. Infrared radiation was discovered in 1800 and has wavelengths longer than visible light. Infrared detectors work based on Planck's radiation law, Stephan Boltzmann law, and Wein's displacement law. They have applications in night vision, astronomy, tracking, art restoration, and more due to advantages like long battery life, reliability in day/night, and not requiring contact with detected objects.
Scintillations principle, working, merits & demerits & applications
Scintillation counter - instrumentation Principle, working, advantages and disadvantages and applications on various fields.
Reference : principles of biochemistry by wilson and walker.
Basic Principles of Radiation Thermometry and Thermometer Calibrations
This document provides an overview of radiation thermometry and calibration of radiation thermometers. It begins with definitions of blackbody radiation and emissivity. It then describes the components and design considerations of spectral radiation thermometers. The document discusses factors to consider for non-contact temperature measurements such as suitable target-sensor distance. It also covers detector types, advantages of radiation thermometers, and common calibration methods including fixed point calibration and spectral responsivity measurement. Finally, it identifies uncertainty sources that can affect the accuracy of radiation thermometer calibrations.
Atomic absorption spectroscopy ppt
Atomic absorption spectroscopy is a technique used to determine the concentration of trace metals in liquid samples. It works by measuring the absorption of light by ground state atoms in a flame. The sample is atomized in the flame and specific elements absorb light from a hollow cathode lamp emitting their characteristic wavelength. The amount of light absorbed is measured and the concentration of the element determined using a calibration curve. AAS is a sensitive and selective method used widely in fields like environmental analysis, food testing, and clinical analysis to determine concentrations of metals like sodium, calcium, lead and zinc.
Flame photometer
This document provides an overview of flame photometry, which is a technique used to determine the concentration of certain metal ions like sodium, potassium, calcium, and lithium. It describes the basic components and working of a flame photometer, including the nebulizer, burner, optical system, and photodetector. When a sample solution containing metal ions is introduced into the flame, the ions absorb energy and emit light of characteristic wavelengths. The intensity of emitted light can then be used for quantitative analysis of metal ion concentrations. Some applications mentioned are analysis of soils, fertilizers, drinks and other samples. Advantages include low cost and sensitivity down to ppm and ppb levels, while limitations are inability to detect non-radiating
Ftir, ndir and flame photometry
FTIR, NDIR, and flame photometry are spectroscopic techniques. FTIR uses a Michelson interferometer to shine various wavelengths of light at once on a sample to obtain infrared absorption data via Fourier analysis. NDIR measures the difference in infrared light absorption between a sample gas and a reference gas to determine concentrations. Flame photometry vaporizes metal salt solutions in a flame and analyzes the characteristic emission spectra of metals like potassium, lithium, calcium, sodium, and barium to detect their presence.
Flame photometry
Flame photometry is a technique that uses the characteristic wavelengths of light emitted from atoms excited in a flame to determine the concentration of certain metal ions in solutions. When a sample containing metal ions is introduced into a flame, the ions are atomized and excited to emit light of distinct wavelengths. The intensity of light emitted is directly proportional to the concentration of the metal ion in the sample. Common metal ions that can be analyzed using this technique include sodium, potassium, lithium, and calcium. Interferences from other ions may affect the results. Modern flame photometers use nebulizers to atomize samples, monochromators to select wavelengths, and detectors to measure light intensities.
Geiger muller counter
The document is a presentation about the Geiger-Muller counter given by Avinash Dhawal to Mr. Sudhir Bhardhwaj. It discusses the history, development, principle, and applications of the Geiger-Muller counter. The Geiger-Muller counter detects ionizing radiation such as alpha, beta, and gamma rays using ionization produced in a Geiger-Muller tube. It was originally developed in 1908 and an advanced model capable of detecting all radiation types was developed in 1928 by Geiger and Muller.
Flame photometer
Flame photometry is a technique that uses a flame photometer instrument to determine the concentration of certain metal ions like sodium, potassium, calcium, and lithium present in a sample. The instrument works by nebulizing the sample solution into a flame, which excites the metal ions. As the ions return to the ground state, they emit light at characteristic wavelengths. A photodetector then measures the light intensities, which correspond to the metal ion concentrations in the original sample. Flame photometry has applications in clinical analysis of body fluids and agricultural soil analysis.
Flame photometer, Atomic Absorbtion Spectrophotometer
This document discusses flame photometry and atomic absorption spectrophotometry. It begins by defining these techniques and their components. Flame photometry uses the characteristic colors emitted from flames to identify and quantify metal ions like sodium, potassium, and lithium. Atomic absorption spectrophotometry measures light absorption by atomized metal ions in a flame. The document then covers the principles, instrumentation, interferences, applications, and quality control of flame photometry.
Nuclear detectors
This document discusses different types of radiation detectors used for dosimetry. It begins by defining radiation and the different types. It then discusses dosimetry, including common dosimetric quantities like activity, exposure, and absorbed dose. The main types of radiation detectors covered are gas-filled detectors like ionization chambers and Geiger-Müller counters, as well as scintillation counters. Ionization chambers detect radiation by ionizing gas molecules, while GM counters amplify this signal. Scintillation counters use a scintillator to convert radiation into light, which is then converted to an electrical signal.
What's hot (19)
Thermal neutron flux distribution by using BF-3 counter
Thermal neutron flux distribution by using BF-3 counter
Scintillations principle, working, merits & demerits & applications
Scintillations principle, working, merits & demerits & applications
Basic Principles of Radiation Thermometry and Thermometer Calibrations
Basic Principles of Radiation Thermometry and Thermometer Calibrations
Flame photometer, Atomic Absorbtion Spectrophotometer
Flame photometer, Atomic Absorbtion Spectrophotometer
More from Alan Crooks
19. Coronary Heart Disease
The document provides instructions for a lesson plan on coronary heart disease. It includes tasks for students such as reading about how blood circulates, writing a letter explaining this to a physician, answering questions about arteries becoming narrowed, listing risk factors for heart attacks, and watching videos labeling a heart diagram. The objectives are to explain heart attacks and associated risks and how to reduce them.
9. Effects of Smoking on Health
This document provides objectives and ideas for creating educational materials about the harms of smoking. It suggests designing a poster or leaflet to persuade children not to start smoking or illustrate smoking's effects on the body. It then lists several harmful effects of smoking, including damage to the lungs' alveoli - the tiny air sacs where oxygen and carbon dioxide are exchanged. The alveoli walls are extremely thin, making them vulnerable to chemicals in tobacco smoke.
28. global warming
John Bailar, an American chemist born on May 13, 1904, discovered that inorganic compounds could exist as isomers, where compounds have the same chemical composition but different structural formulas. Bailar is recognized as the "father of American coordination chemistry". Isomers are compounds with the same chemical composition that have different structural formulas.
13a. Intro To Aromatic Chemistry (Alan)
1) Kekulé originally proposed that benzene had alternating single and double bonds (the Kekulé structure), but this did not explain its chemical properties.
2) Pauling proposed that benzene's structure is better described as a hybrid involving delocalization of the p-electrons around the ring, giving it extra stability.
3) Thermodynamic evidence shows that benzene is more stable than expected based on separate double bonds, with the extra stability coming from delocalization across the ring.
Extraction Of Metals From Ores
The document discusses the extraction of metals from ores. It begins by defining key terms like rock, mineral, and ore. Rock is a mixture of minerals with no fixed composition, while a mineral occurs naturally and has a fixed chemical composition. An ore is a mineral that a metal can be economically extracted from. The document then provides examples of ancient copper and gold artifacts. It describes an experiment where copper is extracted from copper oxide by heating it with charcoal. Safety precautions for the experiment are outlined. Finally, it prompts the reader to identify the reactants and products in the reaction in order to write the word equation.
4. Bonding (Ionic Bonding)
The document discusses the nature of chemical bonds and different types of bonding:
1) Ionic bonding occurs between a metal and non-metal atom and involves the transfer of electrons. For example, in sodium chloride, the sodium atom loses an electron to become positively charged and the chlorine atom gains an electron to become negatively charged.
2) Covalent bonding and metallic bonding are the other two main types of chemical bonding at the atomic level.
3) Ionic bonds are very strong electrostatic attractions between oppositely charged ions that form an ionic lattice. This gives ionic substances high melting and boiling points and the ability to conduct electricity when molten or dissolved.
1b. Atomic & Structure
The document discusses the history of the atomic model from ancient Greek philosophers to modern theory. Democritus first proposed the idea of atoms in 460 BC. In the early 1900s, experiments by Thomson, Rutherford, and Bohr led to developments in the atomic model. Rutherford discovered the nucleus at the center of the atom in 1910. Bohr then proposed his atomic model in 1913 where electrons orbit the nucleus in defined shells. Later models like Schrodinger's probability cloud refined and improved upon understanding of atomic structure. The modern view is that the atom is mostly empty space with a dense nucleus at the center and electron cloud region.
2.Electronic Structure
The document discusses atomic structure and how atoms are represented. It explains that the atomic number of an atom equals the number of protons in the nucleus. The atomic mass of an atom equals the number of protons and neutrons in the nucleus. The number of protons equals the number of electrons. Electrons orbit the nucleus in shells, and each shell can only carry a set number of electrons.
1c. Isotopes, Ram, Qs
The document discusses isotopes and radioactive decay. It defines isotopes as atoms of the same element that have different numbers of neutrons. Three main types of nuclear radiation are described: alpha particles, beta particles, and gamma rays. Alpha particles have a +2 charge and consist of 2 protons and 2 neutrons. Beta particles are high-speed electrons. Gamma rays are highly energetic photons. Nuclear equations are provided to summarize alpha and beta decay, showing how the atom changes during radioactive decay.
1a. History Of The Atom (2)
1. The ancient Greek philosophers Empedocles and Democritus proposed early atomic theories, believing that all matter was made up of indivisible particles called atoms.
2. In the early 1900s, scientists such as Rutherford, Thomson, and Chadwick discovered the internal structure of atoms through experiments, finding that atoms consist of a small, dense nucleus surrounded by electrons.
3. Niels Bohr contributed to the modern atomic model in 1913 by proposing that electrons orbit the nucleus in fixed shells or energy levels.
More from Alan Crooks (10)
1d. Mass Spectrometer Powerpoint
- 1. Use the mouse to select a numbered step
- 3. ionisation by electron ‘gun’ 2
- 4. acceleration and focus by electric field 3
- 5. deflection by magnetic field 4
- 6. detection by ion counter
- 7. detection by ion counter deflection by magnetic field 4 acceleration and focus by electric field 3 ionisation by electron ‘gun’ 2 vaporisation of sample 1