9. Effects of Smoking on Health
•Download as PPT, PDF•
2 likes•1,002 views
This document provides objectives and ideas for creating educational materials about the harms of smoking. It suggests designing a poster or leaflet to persuade children not to start smoking or illustrate smoking's effects on the body. It then lists several harmful effects of smoking, including damage to the lungs' alveoli - the tiny air sacs where oxygen and carbon dioxide are exchanged. The alveoli walls are extremely thin, making them vulnerable to chemicals in tobacco smoke.
Report
Share
Report
Share
Recommended
Water proof boxes
Waterproof boxes/Junction box
1. The product weighs approximately 1/4 the weight of an iron box and can be easily installed or moved, The product is free from corrosion, carries superior insulation.
2. The Product has passed waterproof and dustproof carried out under rigid quality standards. (IP 66)
3. The use is also convenient for the installation of Terminal Substitution Rail, Button Box, Small Terminal, Signal, Relay and Sensor, Communication and joint Box etc.
4. High quality waterproof box series, new imported materials, no recycled material. Good strength. Can do transparent and opaque or PC material, with corresponding backplate for choice.
Use: Indoor and outdoor electrical, Communicate and fire equipment, Ironmaking & Steelmaking, Stone oil chemical, electronic plants...Bet
ter material: High quality thermoplastic ABS or polycarbonate (PC) or choose materials that subject to customers' preferance. ( No corrosive, antistatic, better insulation )
Thickness of the box: The thinnest part has an average thickness of 3 mm
Identification: CE, IP66
Installment: Inner install and outer install
Access hole: The position and size of holes can be processed according to the customers' requests; We have assorted waterproof joints, terminal blocks and mounting base plates for your reference.
Humanized design
19. Coronary Heart Disease
The document provides instructions for a lesson plan on coronary heart disease. It includes tasks for students such as reading about how blood circulates, writing a letter explaining this to a physician, answering questions about arteries becoming narrowed, listing risk factors for heart attacks, and watching videos labeling a heart diagram. The objectives are to explain heart attacks and associated risks and how to reduce them.
Corex Process in Iron Making
The COREX process is an alternative ironmaking process to the blast furnace that uses non-coking coal. It consists of two reactors - a reduction shaft and a melter-gasifier. In the reduction shaft, iron ore is reduced to DRI using counter-current reduction gas. The DRI is then transferred to the melter-gasifier where it is melted and carburized. Reactions in each reactor produce a high-quality reduction gas. The first commercial COREX plant was built in South Africa in 1987. Since then, larger COREX plants have been established worldwide, including in South Korea.
Lectures%202007%20 ironmaking
The document provides an overview of the ironmaking process, including:
- Coke making to produce pure carbon for the blast furnace
- Ore agglomeration through sintering or pelletizing to prepare the iron ore for the blast furnace
- The blast furnace which uses coke, iron ore, and flux to produce liquid iron through countercurrent reduction reactions at high temperatures
It describes the basic zones and reactions within the blast furnace to chemically reduce and physically convert iron oxides into liquid iron.
Aluminium Extraction
The document summarizes the process of extracting aluminium from bauxite ore. Bauxite ore is dissolved in cryolite to lower its melting point before being electrolyzed in a molten electrolyte. During electrolysis, positively charged aluminium ions move to the negatively charged carbon cathode, gaining electrons and forming aluminium atoms. Negatively charged oxide ions move to the positively charged carbon anode, losing electrons and forming oxygen gas. Some oxygen reacts with the carbon anode to form carbon dioxide, requiring frequent anode replacement. The overall process uses electrolysis to extract aluminium from bauxite ore dissolved in cryolite.
aluminium production process
The document discusses the two primary processes used to produce aluminum: the Bayer process and the Hall-Héroult process. The Bayer process extracts alumina (aluminum oxide) from bauxite ore. The Hall-Héroult process then uses electrolysis to reduce alumina into molten aluminum metal. It involves dissolving alumina in a molten cryolite bath and using carbon anodes and iron cathodes to apply a current and separate the aluminum ions from oxygen. This produces pure aluminum metal at the cathode and consumes the carbon anode.
Extraction Of Metals From Ores
The document discusses the extraction of metals from ores. It begins by defining key terms like rock, mineral, and ore. Rock is a mixture of minerals with no fixed composition, while a mineral occurs naturally and has a fixed chemical composition. An ore is a mineral that a metal can be economically extracted from. The document then provides examples of ancient copper and gold artifacts. It describes an experiment where copper is extracted from copper oxide by heating it with charcoal. Safety precautions for the experiment are outlined. Finally, it prompts the reader to identify the reactants and products in the reaction in order to write the word equation.
Production of iron and steel
The document discusses materials science and engineering, specifically focusing on the production of iron and steel. It begins with an introduction to materials science and engineering. It then describes the production process of pig iron, including raw material procurement, blast furnace production, and products. It further discusses various steel production methods like basic oxygen furnace and electric arc furnace production. Continuous casting and different steel products are also outlined. In summary, the document provides an overview of the key industrial processes for producing iron and steel, from raw materials to final products.
Recommended
Water proof boxes
Waterproof boxes/Junction box
1. The product weighs approximately 1/4 the weight of an iron box and can be easily installed or moved, The product is free from corrosion, carries superior insulation.
2. The Product has passed waterproof and dustproof carried out under rigid quality standards. (IP 66)
3. The use is also convenient for the installation of Terminal Substitution Rail, Button Box, Small Terminal, Signal, Relay and Sensor, Communication and joint Box etc.
4. High quality waterproof box series, new imported materials, no recycled material. Good strength. Can do transparent and opaque or PC material, with corresponding backplate for choice.
Use: Indoor and outdoor electrical, Communicate and fire equipment, Ironmaking & Steelmaking, Stone oil chemical, electronic plants...Bet
ter material: High quality thermoplastic ABS or polycarbonate (PC) or choose materials that subject to customers' preferance. ( No corrosive, antistatic, better insulation )
Thickness of the box: The thinnest part has an average thickness of 3 mm
Identification: CE, IP66
Installment: Inner install and outer install
Access hole: The position and size of holes can be processed according to the customers' requests; We have assorted waterproof joints, terminal blocks and mounting base plates for your reference.
Humanized design
19. Coronary Heart Disease
The document provides instructions for a lesson plan on coronary heart disease. It includes tasks for students such as reading about how blood circulates, writing a letter explaining this to a physician, answering questions about arteries becoming narrowed, listing risk factors for heart attacks, and watching videos labeling a heart diagram. The objectives are to explain heart attacks and associated risks and how to reduce them.
Corex Process in Iron Making
The COREX process is an alternative ironmaking process to the blast furnace that uses non-coking coal. It consists of two reactors - a reduction shaft and a melter-gasifier. In the reduction shaft, iron ore is reduced to DRI using counter-current reduction gas. The DRI is then transferred to the melter-gasifier where it is melted and carburized. Reactions in each reactor produce a high-quality reduction gas. The first commercial COREX plant was built in South Africa in 1987. Since then, larger COREX plants have been established worldwide, including in South Korea.
Lectures%202007%20 ironmaking
The document provides an overview of the ironmaking process, including:
- Coke making to produce pure carbon for the blast furnace
- Ore agglomeration through sintering or pelletizing to prepare the iron ore for the blast furnace
- The blast furnace which uses coke, iron ore, and flux to produce liquid iron through countercurrent reduction reactions at high temperatures
It describes the basic zones and reactions within the blast furnace to chemically reduce and physically convert iron oxides into liquid iron.
Aluminium Extraction
The document summarizes the process of extracting aluminium from bauxite ore. Bauxite ore is dissolved in cryolite to lower its melting point before being electrolyzed in a molten electrolyte. During electrolysis, positively charged aluminium ions move to the negatively charged carbon cathode, gaining electrons and forming aluminium atoms. Negatively charged oxide ions move to the positively charged carbon anode, losing electrons and forming oxygen gas. Some oxygen reacts with the carbon anode to form carbon dioxide, requiring frequent anode replacement. The overall process uses electrolysis to extract aluminium from bauxite ore dissolved in cryolite.
aluminium production process
The document discusses the two primary processes used to produce aluminum: the Bayer process and the Hall-Héroult process. The Bayer process extracts alumina (aluminum oxide) from bauxite ore. The Hall-Héroult process then uses electrolysis to reduce alumina into molten aluminum metal. It involves dissolving alumina in a molten cryolite bath and using carbon anodes and iron cathodes to apply a current and separate the aluminum ions from oxygen. This produces pure aluminum metal at the cathode and consumes the carbon anode.
Extraction Of Metals From Ores
The document discusses the extraction of metals from ores. It begins by defining key terms like rock, mineral, and ore. Rock is a mixture of minerals with no fixed composition, while a mineral occurs naturally and has a fixed chemical composition. An ore is a mineral that a metal can be economically extracted from. The document then provides examples of ancient copper and gold artifacts. It describes an experiment where copper is extracted from copper oxide by heating it with charcoal. Safety precautions for the experiment are outlined. Finally, it prompts the reader to identify the reactants and products in the reaction in order to write the word equation.
Production of iron and steel
The document discusses materials science and engineering, specifically focusing on the production of iron and steel. It begins with an introduction to materials science and engineering. It then describes the production process of pig iron, including raw material procurement, blast furnace production, and products. It further discusses various steel production methods like basic oxygen furnace and electric arc furnace production. Continuous casting and different steel products are also outlined. In summary, the document provides an overview of the key industrial processes for producing iron and steel, from raw materials to final products.
Iron & steel
This document provides information on iron and steel. It discusses the chemical and physical properties of iron, including its various allotropes and oxidation states. Iron exists in nature primarily in the form of hematite and magnetite ores. It can be extracted from its ores through smelting in blast furnaces, and further refined. Adding carbon to iron produces steel, which has vastly improved strength and hardness. The document details the production of pig iron, wrought iron, and various steel alloys through adjusting the carbon and other elemental contents. Key applications of iron and its alloys include infrastructure, machinery, tools and vehicles due to its high strength and low cost.
Secondary steel making processes
The document discusses different types and production processes of steel. It begins by introducing different types of steel based on carbon content, such as mild steel and alloy steels. It then describes the basic steelmaking route involving iron making, primary and secondary steelmaking, and continuous casting. The main secondary steelmaking processes discussed are AOD, VOD, CLU, ladle furnace treatment, and RH degassing. Each process's purpose and functioning are explained briefly.
Steel making process
The steel making process involves three main stages:
1) Preparing iron ore by removing impurities through washing, crushing, and sieving.
2) Using a blast furnace to heat iron ore, coke, and limestone above 1500°C to produce pig iron.
3) Further processing pig iron in a converter to reduce its carbon content and remove impurities by adding oxygen and scrap, producing the final liquid steel.
Steel making
The document discusses the structure and properties of metallurgical slags. It states that slags comprise complex compounds of oxides from gangue minerals and sulphides that protect the metal melt. The structure and properties of slags, such as basicity and viscosity, are controlled by their composition. Network forming oxides like SiO2 form stable hexagonal networks, while network breaking oxides like CaO disrupt these networks. The fraction of ionic and covalent bonding in oxides determines their behavior in slags.
Extraction Of Metals
The document discusses the extraction and processing of various metals. It describes how most metals are found in ores and require concentration and extraction of the pure metal. The extraction method depends on the metal's reactivity. Less reactive metals can be directly extracted from ores, while more reactive metals require electrolysis or reduction using carbon or other reagents. Common extraction techniques are also outlined for a number of metals including iron, aluminum, and zinc.
Aluminium Ppt
This document discusses the uses of aluminum in building construction. It begins with an introduction to aluminum, including its history, properties, and production. It then outlines various applications of aluminum in buildings, such as for external and internal components, equipment, industrial structures, prefabricated buildings, and finishes. The document concludes by noting aluminum's prevalence in the construction industry due to its light weight, corrosion resistance, workability, and recyclability.
Extraction Of Iron
The Step by Step Process of Extracting Iron from its Ore using the Blast Furnace with details of Chemical Reactions. Question Answers based on the process of extraction of metals.
28. global warming
John Bailar, an American chemist born on May 13, 1904, discovered that inorganic compounds could exist as isomers, where compounds have the same chemical composition but different structural formulas. Bailar is recognized as the "father of American coordination chemistry". Isomers are compounds with the same chemical composition that have different structural formulas.
13a. Intro To Aromatic Chemistry (Alan)
1) Kekulé originally proposed that benzene had alternating single and double bonds (the Kekulé structure), but this did not explain its chemical properties.
2) Pauling proposed that benzene's structure is better described as a hybrid involving delocalization of the p-electrons around the ring, giving it extra stability.
3) Thermodynamic evidence shows that benzene is more stable than expected based on separate double bonds, with the extra stability coming from delocalization across the ring.
4. Bonding (Ionic Bonding)
The document discusses the nature of chemical bonds and different types of bonding:
1) Ionic bonding occurs between a metal and non-metal atom and involves the transfer of electrons. For example, in sodium chloride, the sodium atom loses an electron to become positively charged and the chlorine atom gains an electron to become negatively charged.
2) Covalent bonding and metallic bonding are the other two main types of chemical bonding at the atomic level.
3) Ionic bonds are very strong electrostatic attractions between oppositely charged ions that form an ionic lattice. This gives ionic substances high melting and boiling points and the ability to conduct electricity when molten or dissolved.
1b. Atomic & Structure
The document discusses the history of the atomic model from ancient Greek philosophers to modern theory. Democritus first proposed the idea of atoms in 460 BC. In the early 1900s, experiments by Thomson, Rutherford, and Bohr led to developments in the atomic model. Rutherford discovered the nucleus at the center of the atom in 1910. Bohr then proposed his atomic model in 1913 where electrons orbit the nucleus in defined shells. Later models like Schrodinger's probability cloud refined and improved upon understanding of atomic structure. The modern view is that the atom is mostly empty space with a dense nucleus at the center and electron cloud region.
2.Electronic Structure
The document discusses atomic structure and how atoms are represented. It explains that the atomic number of an atom equals the number of protons in the nucleus. The atomic mass of an atom equals the number of protons and neutrons in the nucleus. The number of protons equals the number of electrons. Electrons orbit the nucleus in shells, and each shell can only carry a set number of electrons.
1d. Mass Spectrometer Powerpoint
The document describes a 5 step mass spectrometry process where 1) a sample is vaporized, 2) the vapor is ionized by an electron gun, 3) the ions are accelerated and focused by an electric field, 4) the ions are deflected by a magnetic field, and 5) the ions are detected by an ion counter.
1c. Isotopes, Ram, Qs
The document discusses isotopes and radioactive decay. It defines isotopes as atoms of the same element that have different numbers of neutrons. Three main types of nuclear radiation are described: alpha particles, beta particles, and gamma rays. Alpha particles have a +2 charge and consist of 2 protons and 2 neutrons. Beta particles are high-speed electrons. Gamma rays are highly energetic photons. Nuclear equations are provided to summarize alpha and beta decay, showing how the atom changes during radioactive decay.
1a. History Of The Atom (2)
1. The ancient Greek philosophers Empedocles and Democritus proposed early atomic theories, believing that all matter was made up of indivisible particles called atoms.
2. In the early 1900s, scientists such as Rutherford, Thomson, and Chadwick discovered the internal structure of atoms through experiments, finding that atoms consist of a small, dense nucleus surrounded by electrons.
3. Niels Bohr contributed to the modern atomic model in 1913 by proposing that electrons orbit the nucleus in fixed shells or energy levels.
One piece compressive Dental implant : data from Google Scholar
This is a primary review about one piece dental Implant
Digital Smile Design-An innovative tool in aesthetic dentistry.pptx
Digital Smile Design-An innovative tool in aesthetic dentistry.pptxDigital Smile Design-An innovative tool in aesthetic dentistry.pptxDigital Smile Design-An innovative tool in aesthetic dentistry.pptxDigital Smile Design-An innovative tool in aesthetic dentistry.pptxDigital Smile Design-An innovative tool in aesthetic dentistry.pptxDigital Smile Design-An innovative tool in aesthetic dentistry.pptxDigital Smile Design-An innovative tool in aesthetic dentistry.pptxv
Pharmacology of Prostaglandins, Thromboxanes and Leukotrienes
This presentation gives information on the pharmacology of Prostaglandins, Thromboxanes and Leukotrienes i.e. Eicosanoids. Eicosanoids are signaling molecules derived from polyunsaturated fatty acids like arachidonic acid. They are involved in complex control over inflammation, immunity, and the central nervous system. Eicosanoids are synthesized through the enzymatic oxidation of fatty acids by cyclooxygenase and lipoxygenase enzymes. They have short half-lives and act locally through autocrine and paracrine signaling.
biomechanics of running. Dr.dhwani.pptx
The biomechanics of running involves the study of the mechanical principles underlying running movements. It includes the analysis of the running gait cycle, which consists of the stance phase (foot contact to push-off) and the swing phase (foot lift-off to next contact). Key aspects include kinematics (joint angles and movements, stride length and frequency) and kinetics (forces involved in running, including ground reaction and muscle forces). Understanding these factors helps in improving running performance, optimizing technique, and preventing injuries.
2nd generation Antihistaminic-Part II.pptx
Fexofenadine is sold under the brand name Allegra.
It is a selective peripheral H1 blocker. It is classified as a second-generation antihistamine because it is less able to pass the blood–brain barrier and causes lesser sedation, as compared to first-generation antihistamines.
It is on the World Health Organization's List of Essential Medicines. Fexofenadine has been manufactured in generic form since 2011.
More Related Content
Viewers also liked
Iron & steel
This document provides information on iron and steel. It discusses the chemical and physical properties of iron, including its various allotropes and oxidation states. Iron exists in nature primarily in the form of hematite and magnetite ores. It can be extracted from its ores through smelting in blast furnaces, and further refined. Adding carbon to iron produces steel, which has vastly improved strength and hardness. The document details the production of pig iron, wrought iron, and various steel alloys through adjusting the carbon and other elemental contents. Key applications of iron and its alloys include infrastructure, machinery, tools and vehicles due to its high strength and low cost.
Secondary steel making processes
The document discusses different types and production processes of steel. It begins by introducing different types of steel based on carbon content, such as mild steel and alloy steels. It then describes the basic steelmaking route involving iron making, primary and secondary steelmaking, and continuous casting. The main secondary steelmaking processes discussed are AOD, VOD, CLU, ladle furnace treatment, and RH degassing. Each process's purpose and functioning are explained briefly.
Steel making process
The steel making process involves three main stages:
1) Preparing iron ore by removing impurities through washing, crushing, and sieving.
2) Using a blast furnace to heat iron ore, coke, and limestone above 1500°C to produce pig iron.
3) Further processing pig iron in a converter to reduce its carbon content and remove impurities by adding oxygen and scrap, producing the final liquid steel.
Steel making
The document discusses the structure and properties of metallurgical slags. It states that slags comprise complex compounds of oxides from gangue minerals and sulphides that protect the metal melt. The structure and properties of slags, such as basicity and viscosity, are controlled by their composition. Network forming oxides like SiO2 form stable hexagonal networks, while network breaking oxides like CaO disrupt these networks. The fraction of ionic and covalent bonding in oxides determines their behavior in slags.
Extraction Of Metals
The document discusses the extraction and processing of various metals. It describes how most metals are found in ores and require concentration and extraction of the pure metal. The extraction method depends on the metal's reactivity. Less reactive metals can be directly extracted from ores, while more reactive metals require electrolysis or reduction using carbon or other reagents. Common extraction techniques are also outlined for a number of metals including iron, aluminum, and zinc.
Aluminium Ppt
This document discusses the uses of aluminum in building construction. It begins with an introduction to aluminum, including its history, properties, and production. It then outlines various applications of aluminum in buildings, such as for external and internal components, equipment, industrial structures, prefabricated buildings, and finishes. The document concludes by noting aluminum's prevalence in the construction industry due to its light weight, corrosion resistance, workability, and recyclability.
Extraction Of Iron
The Step by Step Process of Extracting Iron from its Ore using the Blast Furnace with details of Chemical Reactions. Question Answers based on the process of extraction of metals.
Viewers also liked (7)
More from Alan Crooks
28. global warming
John Bailar, an American chemist born on May 13, 1904, discovered that inorganic compounds could exist as isomers, where compounds have the same chemical composition but different structural formulas. Bailar is recognized as the "father of American coordination chemistry". Isomers are compounds with the same chemical composition that have different structural formulas.
13a. Intro To Aromatic Chemistry (Alan)
1) Kekulé originally proposed that benzene had alternating single and double bonds (the Kekulé structure), but this did not explain its chemical properties.
2) Pauling proposed that benzene's structure is better described as a hybrid involving delocalization of the p-electrons around the ring, giving it extra stability.
3) Thermodynamic evidence shows that benzene is more stable than expected based on separate double bonds, with the extra stability coming from delocalization across the ring.
4. Bonding (Ionic Bonding)
The document discusses the nature of chemical bonds and different types of bonding:
1) Ionic bonding occurs between a metal and non-metal atom and involves the transfer of electrons. For example, in sodium chloride, the sodium atom loses an electron to become positively charged and the chlorine atom gains an electron to become negatively charged.
2) Covalent bonding and metallic bonding are the other two main types of chemical bonding at the atomic level.
3) Ionic bonds are very strong electrostatic attractions between oppositely charged ions that form an ionic lattice. This gives ionic substances high melting and boiling points and the ability to conduct electricity when molten or dissolved.
1b. Atomic & Structure
The document discusses the history of the atomic model from ancient Greek philosophers to modern theory. Democritus first proposed the idea of atoms in 460 BC. In the early 1900s, experiments by Thomson, Rutherford, and Bohr led to developments in the atomic model. Rutherford discovered the nucleus at the center of the atom in 1910. Bohr then proposed his atomic model in 1913 where electrons orbit the nucleus in defined shells. Later models like Schrodinger's probability cloud refined and improved upon understanding of atomic structure. The modern view is that the atom is mostly empty space with a dense nucleus at the center and electron cloud region.
2.Electronic Structure
The document discusses atomic structure and how atoms are represented. It explains that the atomic number of an atom equals the number of protons in the nucleus. The atomic mass of an atom equals the number of protons and neutrons in the nucleus. The number of protons equals the number of electrons. Electrons orbit the nucleus in shells, and each shell can only carry a set number of electrons.
1d. Mass Spectrometer Powerpoint
The document describes a 5 step mass spectrometry process where 1) a sample is vaporized, 2) the vapor is ionized by an electron gun, 3) the ions are accelerated and focused by an electric field, 4) the ions are deflected by a magnetic field, and 5) the ions are detected by an ion counter.
1c. Isotopes, Ram, Qs
The document discusses isotopes and radioactive decay. It defines isotopes as atoms of the same element that have different numbers of neutrons. Three main types of nuclear radiation are described: alpha particles, beta particles, and gamma rays. Alpha particles have a +2 charge and consist of 2 protons and 2 neutrons. Beta particles are high-speed electrons. Gamma rays are highly energetic photons. Nuclear equations are provided to summarize alpha and beta decay, showing how the atom changes during radioactive decay.
1a. History Of The Atom (2)
1. The ancient Greek philosophers Empedocles and Democritus proposed early atomic theories, believing that all matter was made up of indivisible particles called atoms.
2. In the early 1900s, scientists such as Rutherford, Thomson, and Chadwick discovered the internal structure of atoms through experiments, finding that atoms consist of a small, dense nucleus surrounded by electrons.
3. Niels Bohr contributed to the modern atomic model in 1913 by proposing that electrons orbit the nucleus in fixed shells or energy levels.
More from Alan Crooks (8)
Recently uploaded
One piece compressive Dental implant : data from Google Scholar
This is a primary review about one piece dental Implant
Digital Smile Design-An innovative tool in aesthetic dentistry.pptx
Digital Smile Design-An innovative tool in aesthetic dentistry.pptxDigital Smile Design-An innovative tool in aesthetic dentistry.pptxDigital Smile Design-An innovative tool in aesthetic dentistry.pptxDigital Smile Design-An innovative tool in aesthetic dentistry.pptxDigital Smile Design-An innovative tool in aesthetic dentistry.pptxDigital Smile Design-An innovative tool in aesthetic dentistry.pptxDigital Smile Design-An innovative tool in aesthetic dentistry.pptxv
Pharmacology of Prostaglandins, Thromboxanes and Leukotrienes
This presentation gives information on the pharmacology of Prostaglandins, Thromboxanes and Leukotrienes i.e. Eicosanoids. Eicosanoids are signaling molecules derived from polyunsaturated fatty acids like arachidonic acid. They are involved in complex control over inflammation, immunity, and the central nervous system. Eicosanoids are synthesized through the enzymatic oxidation of fatty acids by cyclooxygenase and lipoxygenase enzymes. They have short half-lives and act locally through autocrine and paracrine signaling.
biomechanics of running. Dr.dhwani.pptx
The biomechanics of running involves the study of the mechanical principles underlying running movements. It includes the analysis of the running gait cycle, which consists of the stance phase (foot contact to push-off) and the swing phase (foot lift-off to next contact). Key aspects include kinematics (joint angles and movements, stride length and frequency) and kinetics (forces involved in running, including ground reaction and muscle forces). Understanding these factors helps in improving running performance, optimizing technique, and preventing injuries.
2nd generation Antihistaminic-Part II.pptx
Fexofenadine is sold under the brand name Allegra.
It is a selective peripheral H1 blocker. It is classified as a second-generation antihistamine because it is less able to pass the blood–brain barrier and causes lesser sedation, as compared to first-generation antihistamines.
It is on the World Health Organization's List of Essential Medicines. Fexofenadine has been manufactured in generic form since 2011.
PGx Analysis in VarSeq: A User’s Perspective
Since our release of the PGx capabilities in VarSeq, we’ve had a few months to gather some insights from various use cases. Some users approach PGx workflows by means of array genotyping or what seems to be a growing trend of adding the star allele calling to the existing NGS pipeline for whole genome data. Luckily, both approaches are supported with the VarSeq software platform. The genotyping method being used will also dictate what the scope of the tertiary analysis will be. For example, are your PGx reports a standalone pipeline or would your lab’s goal be to handle a dual-purpose workflow and report on PGx + Diagnostic findings.
The purpose of this webcast is to:
Discuss and demonstrate the approaches with array and NGS genotyping methods for star allele calling to prep for downstream analysis.
Following genotyping, explore alternative tertiary workflow concepts in VarSeq to handle PGx reporting.
Moreover, we will include insights users will need to consider when validating their PGx workflow for all possible star alleles and options you have for automating your PGx analysis for large number of samples. Please join us for a session dedicated to the application of star allele genotyping and subsequent PGx workflows in our VarSeq software.
Pharmacology of Drugs for Congestive Heart Failure
Congestive Heart failure is caused by low cardiac output and high sympathetic discharge. Diuretics reduce preload, ACE inhibitors lower afterload, beta blockers reduce sympathetic activity, and digitalis has inotropic effects. Newer medications target vasodilation and myosin activation to improve heart efficiency while lowering energy requirements. Combination therapy, following an assessment of cardiac function and volume status, is the most effective strategy to heart failure care.
Call Girls in Kolkata 💯Call Us 🔝 7374876321 🔝 💃 Top Class Call Girl Servic...
Call Girls in Kolkata 💯Call Us 🔝 7374876321 🔝 💃 Top Class Call Girl Service Available
Breast cancer :hormonal discordance.pptx
Receptor Discordance in Breast Carcinoma During the Course of Life
Definition:
Receptor discordance refers to changes in the status of hormone receptors (estrogen receptor ERα, progesterone receptor PgR, and HER2) in breast cancer tumors over time or between primary and metastatic sites.
Causes:
Tumor Evolution:
Genetic and epigenetic changes during tumor progression can lead to alterations in receptor status.
Treatment Effects:
Therapies, especially endocrine and targeted therapies, can selectively pressure tumor cells, causing shifts in receptor expression.
Heterogeneity:
Inherent heterogeneity within the tumor can result in subpopulations of cells with different receptor statuses.
Impact on Treatment:
Therapeutic Resistance:
Loss of ERα or PgR can lead to resistance to endocrine therapies.
HER2 discordance affects the efficacy of HER2-targeted treatments.
Treatment Adjustment:
Regular reassessment of receptor status may be necessary to adjust treatment strategies appropriately.
Clinical Implications:
Prognosis:
Receptor discordance is often associated with a poorer prognosis.
Biopsies:
Obtaining biopsies from metastatic sites is crucial for accurate receptor status assessment and effective treatment planning.
Monitoring:
Continuous monitoring of receptor status throughout the disease course can guide personalized therapy adjustments.
Understanding and managing receptor discordance is essential for optimizing treatment outcomes and improving the prognosis for breast cancer patients.
Call Girls Electronic City 🥰 Bangalore Call Girl No Advance Book Now
Call Girls Electronic City 🥰 Bangalore Call Girl No Advance Book Now
Wabsite For Rant : babesbookhot@gmail.com
Call Girls Goa (india) +91-7426014248 Goa Call Girls
Call Girls Goa (india) +91-7426014248 Goa Call Girls
RESPIRATORY DISEASES by bhavya kelavadiya
The Children are very vulnerable to get affected with respiratory disease.
In our country, the respiratory Disease conditions are consider as major cause for mortality and Morbidity in Child.
Unlimited Fun With Call Girls Gurgaon ✅ 9711199012 💘 FULL CASH PAYMENT
Unlimited Fun With Call Girls Gurgaon ✅ 9711199012 💘 FULL CASH PAYMENT
Dr. Tan's Balance Method.pdf (From Academy of Oriental Medicine at Austin)
Home
Organization
Academy of Oriental Medicine at Austin
Academy of Oriental Medicine at Austin
Academy of Oriental Medicine at Austin
About AOMA: The Academy of Oriental Medicine at Austin offers a masters-level graduate program in acupuncture and Oriental medicine, preparing its students for careers as skilled, professional practitioners. AOMA is known for its internationally recognized faculty, award-winning student clinical internship program, and herbal medicine program. Since its founding in 1993, AOMA has grown rapidly in size and reputation, drawing students from around the nation and faculty from around the world. AOMA also conducts more than 20,000 patient visits annually in its student and professional clinics. AOMA collaborates with Western healthcare institutions including the Seton Family of Hospitals, and gives back to the community through partnerships with nonprofit organizations and by providing free and reduced price treatments to people who cannot afford them. The Academy of Oriental Medicine at Austin is located at 2700 West Anderson Lane. AOMA also serves patients and retail customers at its south Austin location, 4701 West Gate Blvd. For more information see www.aoma.edu or call 512-492-303434.
Giloy in Ayurveda - Classical Categorization and Synonyms
Giloy, also known as Guduchi or Amrita in classical Ayurvedic texts, is a revered herb renowned for its myriad health benefits. It is categorized as a Rasayana, meaning it has rejuvenating properties that enhance vitality and longevity. Giloy is celebrated for its ability to boost the immune system, detoxify the body, and promote overall wellness. Its anti-inflammatory, antipyretic, and antioxidant properties make it a staple in managing conditions like fever, diabetes, and stress. The versatility and efficacy of Giloy in supporting health naturally highlight its importance in Ayurveda. At Planet Ayurveda, we provide a comprehensive range of health services and 100% herbal supplements that harness the power of natural ingredients like Giloy. Our products are globally available and affordable, ensuring that everyone can benefit from the ancient wisdom of Ayurveda. If you or your loved ones are dealing with health issues, contact Planet Ayurveda at 01725214040 to book an online video consultation with our professional doctors. Let us help you achieve optimal health and wellness naturally.
ℂall Girls 𝕀ndore ( 000000000 ) 𝕍𝕚𝕡 ℂall girl Indore
ℂall Girls 𝕀ndore ( 000000000 ) 𝕍𝕚𝕡 ℂall girl Indore
Recently uploaded (20)
One piece compressive Dental implant : data from Google Scholar
One piece compressive Dental implant : data from Google Scholar
Digital Smile Design-An innovative tool in aesthetic dentistry.pptx
Digital Smile Design-An innovative tool in aesthetic dentistry.pptx
Pharmacology of Prostaglandins, Thromboxanes and Leukotrienes
Pharmacology of Prostaglandins, Thromboxanes and Leukotrienes
Pharmacology of Drugs for Congestive Heart Failure
Pharmacology of Drugs for Congestive Heart Failure
Call Girls in Kolkata 💯Call Us 🔝 7374876321 🔝 💃 Top Class Call Girl Servic...
Call Girls in Kolkata 💯Call Us 🔝 7374876321 🔝 💃 Top Class Call Girl Servic...
Call Girls Electronic City 🥰 Bangalore Call Girl No Advance Book Now
Call Girls Electronic City 🥰 Bangalore Call Girl No Advance Book Now
Tele Optometry (kunj'sppt) / Basics of tele optometry.
Tele Optometry (kunj'sppt) / Basics of tele optometry.
Call Girls Goa (india) +91-7426014248 Goa Call Girls
Call Girls Goa (india) +91-7426014248 Goa Call Girls
Unlimited Fun With Call Girls Gurgaon ✅ 9711199012 💘 FULL CASH PAYMENT
Unlimited Fun With Call Girls Gurgaon ✅ 9711199012 💘 FULL CASH PAYMENT
pharmacy exam preparation for undergradute students.pptx
pharmacy exam preparation for undergradute students.pptx
Dr. Tan's Balance Method.pdf (From Academy of Oriental Medicine at Austin)
Dr. Tan's Balance Method.pdf (From Academy of Oriental Medicine at Austin)
Giloy in Ayurveda - Classical Categorization and Synonyms
Giloy in Ayurveda - Classical Categorization and Synonyms
ℂall Girls 𝕀ndore ( 000000000 ) 𝕍𝕚𝕡 ℂall girl Indore
ℂall Girls 𝕀ndore ( 000000000 ) 𝕍𝕚𝕡 ℂall girl Indore
9. Effects of Smoking on Health
- 1. Smoking (cont’d)Smoking (cont’d) 28th April 2014 Objectives Design a poster to either: • persuade primary school children not to start smoking • Illustrate the effects of smoking on the body.
- 2. Design a leaflet… More ideas on next slides
- 3. Harmful to whole body
- 6. Which twin is the smoker? 22 years old
- 7. Chemicals in Tobacco Smoke
- 11. Air Sacs (Alveoli) • There are about 600 million alveoli in an adult. The total surface area is about 100m2 ~ one-third area of a tennis court. • The alveoli walls are only 7 millionths of a millimetre across (1 cell). This is one- fiftieth the thickness of a human hair.
- 12. Another type of smoking machine.