18th international scientific conference Business Logistics in Modern Management
October 11-12, 2018 - Osijek, Croatia
SUPPLY CHAIN PERFORMANCE MEASUREMENT SYSTEM
OF LOGISTICS SERVICE PROVIDERS. A CONCEPTUAL
FRAMEWORK AND RESEARCH AGENDA
Rafał�Haffer
Nicolaus Copernicus University, Toruń, Poland
E-mail: [email protected]
Received: May 30, 2018
Received revised: June 25, 2018
Accepted for publishing: July 4, 2018
Abstract
Currently, intensified globalization and consequent competitive pressures have
reemphasized the importance of logistics service providers (LSPs) in managing
logistics processes as well as customer and supplier relationships within the supply
chain management. This requires them to develop their business performance
measurement systems (BPMSs) towards supply chain performance measurement
systems (SCPMSs) a scope of which depends on the LSP advancement thus whether
it operates as a third-party logistics (3PL) provider, a lead logistics provider (LLP) or
a fourth party logistics (4PL) provider. However research on the topic of LSP
SCPMSs remains scarce as it usually concentrates on SCPMSs of the focal companies
orchestrating the whole supply chain (SC). At the same time LSPs have an exceptional
impact on SC performance as the operators connecting the SC links, and since they
operate within a portion of or the whole supply chains of the sectors they serve, they
need to develop not only the internal BPMSs, but also the external SCPMSs. The
present paper aims to consolidate knowledge on supply chain performance
measurement systems perceived and developed from the perspective of LSPs and
makes a three-fold contribution to the discussion. First, it proposes the LSP SCPMS
definition. Second, it develops a research framework that distinguishes key issues
which need consideration when examining the LSP SCPMSs, namely the LSP
advancement, the LSP SCPMS components such as applied subsystems, approaches,
ICT technologies and metrics including methods for metric selection followed by the
LSP SCPMS adoption consequences, characteristics and life cycle and finally
contextual factors constituting stimuli and barriers for the LSP SCPMS development.
Then a research agenda is presented to guide future research on the LSP SCPMSs.
This work is designed to inspire researchers to continue expanding the knowledge
about how to develop high-performing SCPMSs for different supply chain players
including LSPs.
Key words: LSP supply chain performance measurement system (LSP SCPMS),
logistics service providers (LSPs), research framework
Supply chain performance measurement system of logistics service providers. A conceptual framework…
Rafał�Haffer
86
1. INTRODUCTION
In�today’s�competitive�business�environment,�logistics�service�providers�(LSPs)�
play a critical role in the supply chains (SCs) of their customers as the operators
connecting the supply chain links. Since they affect SC performance they are
inc ...
Organizational structure, service capability and its impact on business perfo...Russ Merz, Ph.D.
Abstract: This study aims to verify what aspects related with organizational structure and service capability contribute to the performance of logistics providers in the business-to-business (B2B) context with client companies in supply chains. A sample of 80 logistics provider companies of the South of Brazil was surveyed, from a universe of companies that develop logistics activities, such as warehousing and inventory control, transportation, scheduled deliveries, port operations and customs clearance. The survey instrument consists of multiple scales to represent the construct variables related to organizational structure, service capability, and business performance. The answers re ect the logistics providers’ perception of their work performance for the main customer in the supply chain. Resorting to multivariate statistical analysis based on structural equations modeling – LV-PLS (Latent Variable – Partial Least Squares) with bootstrapping, we found that the sole attribute that contributes for a better business performance of the logistics provider is its ability to meet, both technically and operationally, the service contracted by the customer. The ability to provide logistics service is positively and signi cantly in uenced by an organizational structure endowed with both autonomy and organization.
Sustainable supply chain management in a circular economy slide shareAnna Aminoff
Presentation slides in KES SDM 2016 conference
Abstract: In the last few years, the circular economy has attracted increasing attention as a way to overcome the problems of the current production and consumption model based on continuous growth and increasing resource throughput. A circular economy is an industrial system that is restorative or regenerative by intention and design. Although supply chains are the key unit of action in the change towards a circular economy, the academic literature on supply chain management approaches in a circular economy is very much in its infancy. However, two distinct literature streams, namely sustainable supply chain management and product service systems, seem to offer valua-ble insights into the investigation of supply chain management in a circular economy. The aim of this paper is to analyse the main characteristics and challenges of supply chain management in a circular economy and identify how these two literature streams can contribute to researching it.
A UML-Based Approach for Modeling of Air Cargo Forwarder System of Third-Part...inventionjournals
Air freight forwarders as shippers and customers of the servers play an important role in the whole process of the supply chain. However, air freight forwarders are an operations-intensive industry involving many participants and complex operations. Therefore, a strong information system is needed to optimize the performance of cargo control between overseas business partners, customers and branch offices, and to improve competitiveness. The purpose of this study is to use a Unified Modeling Language (UML) to model the logistics provider's air freight forwarding system. First, the study will discuss the concepts of supply chain management, the characteristics of global logistics management, and the third-party definition of logistics providers - air freight forwarders. Then the study use UML as a modeling tool to construct an air cargo forward system. From this study can see that system modeled by UML is better suited to the real needs of the business than ever before and take the information flow along the supply chain with maximum cost-effectiveness, delivery, and flexibility.
International Journal of Business and Management Invention (IJBMI) is an international journal intended for professionals and researchers in all fields of Business and Management. IJBMI publishes research articles and reviews within the whole field Business and Management, new teaching methods, assessment, validation and the impact of new technologies and it will continue to provide information on the latest trends and developments in this ever-expanding subject. The publications of papers are selected through double peer reviewed to ensure originality, relevance, and readability. The articles published in our journal can be accessed online.
Organizational structure, service capability and its impact on business perfo...Russ Merz, Ph.D.
Abstract: This study aims to verify what aspects related with organizational structure and service capability contribute to the performance of logistics providers in the business-to-business (B2B) context with client companies in supply chains. A sample of 80 logistics provider companies of the South of Brazil was surveyed, from a universe of companies that develop logistics activities, such as warehousing and inventory control, transportation, scheduled deliveries, port operations and customs clearance. The survey instrument consists of multiple scales to represent the construct variables related to organizational structure, service capability, and business performance. The answers re ect the logistics providers’ perception of their work performance for the main customer in the supply chain. Resorting to multivariate statistical analysis based on structural equations modeling – LV-PLS (Latent Variable – Partial Least Squares) with bootstrapping, we found that the sole attribute that contributes for a better business performance of the logistics provider is its ability to meet, both technically and operationally, the service contracted by the customer. The ability to provide logistics service is positively and signi cantly in uenced by an organizational structure endowed with both autonomy and organization.
Sustainable supply chain management in a circular economy slide shareAnna Aminoff
Presentation slides in KES SDM 2016 conference
Abstract: In the last few years, the circular economy has attracted increasing attention as a way to overcome the problems of the current production and consumption model based on continuous growth and increasing resource throughput. A circular economy is an industrial system that is restorative or regenerative by intention and design. Although supply chains are the key unit of action in the change towards a circular economy, the academic literature on supply chain management approaches in a circular economy is very much in its infancy. However, two distinct literature streams, namely sustainable supply chain management and product service systems, seem to offer valua-ble insights into the investigation of supply chain management in a circular economy. The aim of this paper is to analyse the main characteristics and challenges of supply chain management in a circular economy and identify how these two literature streams can contribute to researching it.
A UML-Based Approach for Modeling of Air Cargo Forwarder System of Third-Part...inventionjournals
Air freight forwarders as shippers and customers of the servers play an important role in the whole process of the supply chain. However, air freight forwarders are an operations-intensive industry involving many participants and complex operations. Therefore, a strong information system is needed to optimize the performance of cargo control between overseas business partners, customers and branch offices, and to improve competitiveness. The purpose of this study is to use a Unified Modeling Language (UML) to model the logistics provider's air freight forwarding system. First, the study will discuss the concepts of supply chain management, the characteristics of global logistics management, and the third-party definition of logistics providers - air freight forwarders. Then the study use UML as a modeling tool to construct an air cargo forward system. From this study can see that system modeled by UML is better suited to the real needs of the business than ever before and take the information flow along the supply chain with maximum cost-effectiveness, delivery, and flexibility.
International Journal of Business and Management Invention (IJBMI) is an international journal intended for professionals and researchers in all fields of Business and Management. IJBMI publishes research articles and reviews within the whole field Business and Management, new teaching methods, assessment, validation and the impact of new technologies and it will continue to provide information on the latest trends and developments in this ever-expanding subject. The publications of papers are selected through double peer reviewed to ensure originality, relevance, and readability. The articles published in our journal can be accessed online.
From flop to flipped - A course transformationPer Olof Arnäs
This is the story of a course transformation process of course in Transport economics. In 2013, the course was rebooted. New material was added and both Active and Blended Learning was introduced (videos, e-learning, new exam type, large case work) resulting in much better evaluation grades and study results.
OPERATIONAL ANALYSIS OF A LOGISTIC PROCESS IN THE PETROLEUM EXPLORATION AND P...Fredjoger Mendes
The objective of this article was to demonstrate the research and use of an operations analysis model unique to logistic activities that could integrate the use of three tools to identify and analyze problems in a process and to prove the interdependence of losses and gains between the various factors that make up an activity. In this proposal the
research of context, concepts, application and evaluations on the models chosen for the integration was made. After designing the integrated model, it was tested in a real case
of application and the results of the analysis were obtained, taking care to contextualize all the technical, social and cultural aspects involved in the process. In the end, the conclusion
exposed the positive and negative aspects of the logistic process evaluated and demonstrated the effectiveness of the integration of tools, identifying opportunities for improvement with the prioritization and indication of a tool for the solution of the deviations.
As technology demands on logistics services providers (LSPs) become more intense, organizations are seeking to integrate or consolidate their third-part logistics (3PL) providers' solutions for tasks such as warehousing, inventory management, shipment management, cross-docking, order management, bar coding, analytics and far more. We offer a roadmap for selecting whether to make such a transition in logistics systems via a big bang or phased/pilot approach.
Course transformations: From flop to flippedPer Olof Arnäs
The story on two course redevelopment projects in logistics with flipped classroom, peer instruction, co-teaching and other methods (blended learning).
Assignment on logistic and Supply chain Management Anup Roy
future prospect of logistic management
Geographic information System (GIS) and global positions system (GPS) influence logistic management
the different form of Logistic Management
Simulation in the supply chain context a survey Sergio Terzia,.docxbudabrooks46239
Simulation in the supply chain context: a survey
Sergio Terzia,*, Sergio Cavalierib a Politecnico di Milano, Department of Economics, Industrial and Management Engineering, Piazza Leonardo da Vinci 32, 20133 Milan, Italy b Department of Industrial Engineering, Universita` di Bergamo, Viale Marconi 5, 24044 Dalmine, Italy Received 29 January 2003; accepted 13 June 2003
Abstract
The increased level of competitiveness in all industrial sectors, exacerbated in the last years by the globalisation of the economies and by the sharp fall of the final demands, are pushing enterprises to strive for a further optimisation of their organisational processes, and in particular to pursue new forms of collaboration and partnership with their direct logistics counterparts. As a result, at a company level there is a progressive shift towards an external perspective with the design and implementation of new management strategies, which are generally named with the term of supply chain management (SCM). However, despite the flourish of several IT solutions in this context, there are still evident hurdles to overcome, mainly due to the major complexity of the problems to be tackled in a logistics network and to the conflicts resulting from local objectives versus network strategies. Among the techniques supporting a multi-decisional context, as a supply chain (SC) is, simulation can undoubtedly play an important role, above all for its main property to provide what-if analysis and to evaluate quantitatively benefits and issues deriving from operating in a co-operative environment rather than playing a pure transaction role with the upstream/downstream tiers. The paper provides a comprehensive review made on more than 80 articles, with the main purpose of ascertaining which general objectives simulation is generally called to solve, which paradigms and simulation tools are more suitable, and deriving useful prescriptions both for practitioners and researchers on its applicability in decision-making processes within the supply chain context. # 2003 Elsevier B.V. All rights reserved. Keywords: Parallel and distributed simulation; Supply chain management; High level architecture; Survey 1. Introduction Modern industrial enterprises operate in a rapidly changing world, stressed by even more global competition, managing world-wide procurement and unforeseeable markets, supervising geographically distributed production plants, striving for the provision of outstanding products and high quality customer service. More than in the past, companies which are not able to revise periodically their strategies and, accordingly, to modify their organisational processes seriously risk to be pulled out from the competitive edge. In the 1990s, companies have made huge efforts for streamlining their internal business processes, identifying and enhancing the core activities pertaining to the product value chain, and invested massively in new intra-company information and communicat.
1. Analyze the case and determine the factors that have made KFC a s.docxaulasnilda
1. Analyze the case and determine the factors that have made KFC a successful global business.
2. Why are cultural factors so important to KFC’s sales success in India and China?
3. Spot the cultural factors in India that go against KFC’s original recipe.
4. Why did Kentucky Fried Chicken change its name to KFC?
5. What PESTEL factors contributed to KFC’s positioning?
6. How does the SWOT analysis of KFC affect the future of KFC?
Points to be considered:
1. Please follow 6th edition of the APA Format.
2. On separate page, the word "Abstract,' centered on paper followed by 75-100 word overview.
3. References needs to be Peer Reviewed Articles.
4. This assignment should be 15-20 pages excluding the title and reference pages. The paper should contain at least one graph, figure, chart, or table.
5. Please use the questions as Headings for the topics in the Paper.
I have attached the case study document below.
.
1. A.Discuss how the concept of health has changed over time. B.Di.docxaulasnilda
1. A.Discuss how the concept of "health" has changed over time. B.Discuss how the concept has evolved to include wellness, illness, and overall well-being. C.How has health promotion changed over time? D.Why is it important that nurses implement health promotion interventions based on evidence-based practice?
2. A.Compare and contrast the three different levels of health promotion (primary, secondary, tertiary). B.Discuss how the levels of prevention help determine educational needs for a patient.
.
More Related Content
Similar to 18th international scientific conference Business Logistics in.docx
From flop to flipped - A course transformationPer Olof Arnäs
This is the story of a course transformation process of course in Transport economics. In 2013, the course was rebooted. New material was added and both Active and Blended Learning was introduced (videos, e-learning, new exam type, large case work) resulting in much better evaluation grades and study results.
OPERATIONAL ANALYSIS OF A LOGISTIC PROCESS IN THE PETROLEUM EXPLORATION AND P...Fredjoger Mendes
The objective of this article was to demonstrate the research and use of an operations analysis model unique to logistic activities that could integrate the use of three tools to identify and analyze problems in a process and to prove the interdependence of losses and gains between the various factors that make up an activity. In this proposal the
research of context, concepts, application and evaluations on the models chosen for the integration was made. After designing the integrated model, it was tested in a real case
of application and the results of the analysis were obtained, taking care to contextualize all the technical, social and cultural aspects involved in the process. In the end, the conclusion
exposed the positive and negative aspects of the logistic process evaluated and demonstrated the effectiveness of the integration of tools, identifying opportunities for improvement with the prioritization and indication of a tool for the solution of the deviations.
As technology demands on logistics services providers (LSPs) become more intense, organizations are seeking to integrate or consolidate their third-part logistics (3PL) providers' solutions for tasks such as warehousing, inventory management, shipment management, cross-docking, order management, bar coding, analytics and far more. We offer a roadmap for selecting whether to make such a transition in logistics systems via a big bang or phased/pilot approach.
Course transformations: From flop to flippedPer Olof Arnäs
The story on two course redevelopment projects in logistics with flipped classroom, peer instruction, co-teaching and other methods (blended learning).
Assignment on logistic and Supply chain Management Anup Roy
future prospect of logistic management
Geographic information System (GIS) and global positions system (GPS) influence logistic management
the different form of Logistic Management
Simulation in the supply chain context a survey Sergio Terzia,.docxbudabrooks46239
Simulation in the supply chain context: a survey
Sergio Terzia,*, Sergio Cavalierib a Politecnico di Milano, Department of Economics, Industrial and Management Engineering, Piazza Leonardo da Vinci 32, 20133 Milan, Italy b Department of Industrial Engineering, Universita` di Bergamo, Viale Marconi 5, 24044 Dalmine, Italy Received 29 January 2003; accepted 13 June 2003
Abstract
The increased level of competitiveness in all industrial sectors, exacerbated in the last years by the globalisation of the economies and by the sharp fall of the final demands, are pushing enterprises to strive for a further optimisation of their organisational processes, and in particular to pursue new forms of collaboration and partnership with their direct logistics counterparts. As a result, at a company level there is a progressive shift towards an external perspective with the design and implementation of new management strategies, which are generally named with the term of supply chain management (SCM). However, despite the flourish of several IT solutions in this context, there are still evident hurdles to overcome, mainly due to the major complexity of the problems to be tackled in a logistics network and to the conflicts resulting from local objectives versus network strategies. Among the techniques supporting a multi-decisional context, as a supply chain (SC) is, simulation can undoubtedly play an important role, above all for its main property to provide what-if analysis and to evaluate quantitatively benefits and issues deriving from operating in a co-operative environment rather than playing a pure transaction role with the upstream/downstream tiers. The paper provides a comprehensive review made on more than 80 articles, with the main purpose of ascertaining which general objectives simulation is generally called to solve, which paradigms and simulation tools are more suitable, and deriving useful prescriptions both for practitioners and researchers on its applicability in decision-making processes within the supply chain context. # 2003 Elsevier B.V. All rights reserved. Keywords: Parallel and distributed simulation; Supply chain management; High level architecture; Survey 1. Introduction Modern industrial enterprises operate in a rapidly changing world, stressed by even more global competition, managing world-wide procurement and unforeseeable markets, supervising geographically distributed production plants, striving for the provision of outstanding products and high quality customer service. More than in the past, companies which are not able to revise periodically their strategies and, accordingly, to modify their organisational processes seriously risk to be pulled out from the competitive edge. In the 1990s, companies have made huge efforts for streamlining their internal business processes, identifying and enhancing the core activities pertaining to the product value chain, and invested massively in new intra-company information and communicat.
Similar to 18th international scientific conference Business Logistics in.docx (20)
1. Analyze the case and determine the factors that have made KFC a s.docxaulasnilda
1. Analyze the case and determine the factors that have made KFC a successful global business.
2. Why are cultural factors so important to KFC’s sales success in India and China?
3. Spot the cultural factors in India that go against KFC’s original recipe.
4. Why did Kentucky Fried Chicken change its name to KFC?
5. What PESTEL factors contributed to KFC’s positioning?
6. How does the SWOT analysis of KFC affect the future of KFC?
Points to be considered:
1. Please follow 6th edition of the APA Format.
2. On separate page, the word "Abstract,' centered on paper followed by 75-100 word overview.
3. References needs to be Peer Reviewed Articles.
4. This assignment should be 15-20 pages excluding the title and reference pages. The paper should contain at least one graph, figure, chart, or table.
5. Please use the questions as Headings for the topics in the Paper.
I have attached the case study document below.
.
1. A.Discuss how the concept of health has changed over time. B.Di.docxaulasnilda
1. A.Discuss how the concept of "health" has changed over time. B.Discuss how the concept has evolved to include wellness, illness, and overall well-being. C.How has health promotion changed over time? D.Why is it important that nurses implement health promotion interventions based on evidence-based practice?
2. A.Compare and contrast the three different levels of health promotion (primary, secondary, tertiary). B.Discuss how the levels of prevention help determine educational needs for a patient.
.
1. Abstract2. Introduction to Bitcoin and Ethereum3..docxaulasnilda
1.
Abstract
2.
Introduction to Bitcoin and Ethereum
3.
Background
a. How do we understand Ethereum and Smart Contracts?
b. Blockchain Cryptocurrency and Smart Contracts
c. What are Pros and Cons of using Ethereum?
d. Ethereum Virtual Machine
4.
Platforms or Programming for Smart Contracts
5.
Smart Contract Applications
6.
Research Methodology
a. Current Smart Contract Applications
b. Security Issues
c. Privacy Issues
d. Performance Issues
7.
Ethereum System and Solidity Smart Contracts
a. What do we understand about Ethereum and the Likes?
b. How does Ethereum and the likes work?
8.
Ethereum and Hyperledger in Smart Contracts
9.
What can we get by the term Scalability?
10.
Smart Contracting Programming and High-Level Issues
a. Usability
b. Ethical and Legal Issues
11.
Specifications and Implementations
12.
Pros and Cons of using Ethereum Smart Contracts
13.
Current Trends on Ethereum
14.
Future State of Ethereum Smart Contracts or Virtual Machines
15.
Conclusion
Note: Paper about Ethereum
20 pages
ppt 12-14 slides.
No plagiarism,
APA , Citations, and references.
.
1. A. Compare vulnerable populations. B. Describe an example of one .docxaulasnilda
1. A. Compare vulnerable populations. B. Describe an example of one of these groups in the United States or from another country. C.Explain why the population is designated as "vulnerable." Include the number of individuals belonging to this group and the specific challenges or issues involved. D. Discuss why these populations are unable to advocate for themselves, the ethical issues that must be considered when working with these groups, and how nursing advocacy would be beneficial.
2. A. How does the community health nurse recognize bias, stereotypes, and implicit bias within the community? B. How should the nurse address these concepts to ensure health promotion activities are culturally competent? C. Propose strategies that you can employ to reduce cultural dissonance and bias to deliver culturally competent care. D. Include an evidence-based article that addresses the cultural issue. E. Cite and reference the article in APA format.
.
1. A highly capable brick and mortar electronics retailer with a l.docxaulasnilda
1. A highly capable brick and mortar electronics retailer with a loyal regional customer base (such as Fry's) should adopt which of the following medium term strategies?
"50% off" sale every month
Divest
Niche or harvest
Invest in R&D
2. Amazon's strategy involves offering expanded variety but at very competitive prices. This is primarily achieved through
Economies of scope
Focus on international markets
Economies of scale
Innovative products
3. Uber is an example of industry chaining in which of the following ways?
Economies of scale for service providers
Economies of scope for customers
Improving access and reduced search costs for customers and service providers
Lower wages for service providers and lower prices for customers
4. Shareholder returns are primarily derived from
Growth in share value and dividend payments
dividend payments only
Growth in company profits
Growth in the share value only
5. Strategy is defined best as:
A unique value proposition supported by sound financial decisions
A unique value proposition supported by synergies in operations
A unique value proposition supported by aggressive marketing
A unique value proposition supported by a complex supply chain
6. The cost of attracting new customers is the highest with which of the following groups?
Early adopters
Late majority
Laggards
Innovators
7. In the context of the Differentiation (Quality) vs Efficiency trade-off curve, the efficient frontier refers to:
The company that provides maximum quality for a given cost
The company that provides minimum cost
The company that provides maximum quality
The company that maximizes efficiency
8. Nike hiring sports stars to be brand ambassadors is an example of which of the following mechanisms?
Market development
Customer segmentation
Product development
Market penetration
9. Which of the following is an indication of strategic committment of a company in an industry
Lowering wages of the workforce
Increased technology investment
Acquiring real-estate in an urban location of demand
Increased divident payments for two years in a row
10. A pharma company with a deep roster of capable engineers and scientists and that is the market leader is best advised to begin development of a new drug as:
A partnership with smaller competitors
License its innovation from other laboratories
An independent venture
Smaller scale effort
11. The most valuable competency in the declining phase of an industry is:
Resposiveness
Innovation
Efficiency
Quality
12. There is often limited capacity relative to demand in the early growth period of an industry because:
Capacity is very expensive in the later stages of an industry
Only few companies have products or technologies in a budding industry
Prices tend to be low in the embryonic stage
Many companies compete for early advantage in an emerging industry
13. If the willingness to pay of .
1. A. Research the delivery, finance, management, and sustainabili.docxaulasnilda
1. A. Research the delivery, finance, management, and sustainability methods of the U.S. health care system.
B. Evaluate the effectiveness of one or more of these areas on quality patient care and health outcomes.
C.Propose a potential health care reform solution to improve effectiveness in the area you evaluated and predict the expected effect.
D. Describe the effect of health care reform on the U.S. health care system and its respective stakeholders.
E.Support your post with a peer-reviewed journal article.
2. The Affordable Care Act was signed into law by President Barack Obama in March 2010. Many of the provisions of the law directly affect health care providers. Review the following topic materials:
"About the Affordable Care Act"
"Health Care Transformation: The Affordable Care Act and More"
What are the most important elements of the Affordable Care Act in relation to community and public health? What is the role of the nurse in implementing this law?
.
1. All of the following artists except for ONE used nudity as part.docxaulasnilda
1. All of the following artists except for ONE used nudity as part of her/ his work:
a) Ana Mendieta
b) Carolee Schneeman
c) Yoko Ono
d) Judy Chicago
e) Robert Mapplethorpe
2. All of the following except ONE are features of Conceptualism (though not all apply to every Conceptualist work)
a) Audience participation
b) Use of text/language within visual works
c) Direct criticism of the art museum
d) Very expensive artworks
e) Sets of instructions to follow
f) Temporary or fleeting projects
3. Please match the following description with correct art movement or tendency:
1) Minimalism
2) Fluxus
3) Abstract Expressionism
4) Feminist practices
5) Conceptualism
A. Created action paintings that blurred the line between art and life
B. Included works drawing attention to the unethical actions of art museums
C. An idealistic to recalibrate the human senses
D. A loose knit international group of artists that made performances and other unconventional works
E. Argued that the criteria for determining historical value in visual art has been too narrow
4. The following art movement or tendencies except for ONE can be considered to have been responses to Abstract Expressionism (through sometimes for very different reasons)
a) Conceptualism
b) Pop Art
c) Earthwork
d) Surrealism
e) Minimalism
.
1. According to the article, what is myth and how does it functi.docxaulasnilda
1. According to the article, what is myth and how does it function as a naturalizing agent?
2. What is a sign?What is its relation to myth?
3. If advertising “is not an attempted sale of products – evidence shows that consumers are able to resist ‘advertising in the imperative’(12.) – but a ‘clear expression of a culture’ and cultural beliefs” then what does the iPod advert express about current culture?
4. What does the iPod advert presented in the article “sell”?
Attachments have resources
.
1. 6 Paragraph OverviewReflection on Reading Assigbnment Due Before.docxaulasnilda
1. 6 Paragraph Overview/Reflection on Reading Assigbnment Due Before Class Commences
The Critical Theorists: Critical Legal Theory, Critical Race Theory, Critical Feminist Theory, & Critical Latinx Theory
Wacks Chapters 13 & 14
Bix Chapter 19
2.6 Paragraph Overview/Reflection on Reading Assigbnment Due Before Class Commences
Why Obey the Law & Why Punish?
Wacks Chapters 11 & 12
Bix Chapters 9 & 16
3.6 Paragraph Overview/Reflection on Reading Assigbnment Due Before Class Commences
Wacks Chapter 10
Bix Chapter 10
.
1. A.Compare independent variables, B.dependent variables, and C.ext.docxaulasnilda
1. A.Compare independent variables, B.dependent variables, and C.extraneous variables. D.Describe two ways that researchers attempt to control extraneous variables. E.Support your answer with peer-reviewed articles.
2. A.Describe the "levels of evidence" B. and provide an example of the type of practice change that could result from each.
.
1. According to the Court, why is death a proportionate penalty for .docxaulasnilda
1. According to the Court, why is death a proportionate penalty for child rape? Do you agree? Explain your reasons.
2. Who should make the decision as to what is the appropriate penalty for crimes? Courts? Legislatures? Juries? Defend your answer.
3. In deciding whether the death penalty for child rape is cruel and unusual, is it relevant that Louisiana is the only state that punishes child rape with death?
4. According to the Court, some crimes are worse than death. Do you agree? Is child rape one of them? Why? Why not?
THE RESPONSE TO THE FOUR QUESTIONS ALL TOGETHER SHOULD LEAD ADD UP TO 400 WORDS IN TOTAL.
.
1- Prisonization What if . . . you were sentenced to prison .docxaulasnilda
1- Prisonization?
What if . . . you were sentenced to prison? Do you believe you would become a more seasoned criminal or would learning criminal ways from those who were caught make you a worse criminal? Explain
2- Gangs of Prison?
What if . . . you were appointed as warden at a medium security prison which had a terrible problem with gang affiliations? What methods would you employ to combat the problem? Explain.
3-The solidarity of inmate culture (Big House era) developed through several characteristics. Name them?
.
1. 250+ word count What is cultural and linguistic competence H.docxaulasnilda
1. 250+ word count
What is cultural and linguistic competence? How does this competency apply to public health? Why is this important to the practice of public health?
2. 250+ word count
Reflect on your own cultural and linguistic competence. How confident are you in your ability to address the needs of diverse communities? How do you think you could improve your level of cultural and linguistic competence?
.
1. 200 words How valuable is a having a LinkedIn profile Provid.docxaulasnilda
1. 200 words How valuable is a having a LinkedIn profile? Provide example to support your statement.
2. 200 words What benefits does it add your academic and professional development? Provide example to support your statement.
3. 200 words How does having this profile contribute to networking as healthcare and public health professionals? Provide example to support your statement.
4. 200 words What other social media and networking platforms are available to network with other healthcare and public health professionals? Provide example to support your statement.
.
1. According to recent surveys, China, India, and the Philippines ar.docxaulasnilda
1. According to recent surveys, China, India, and the Philippines are the three most popular countries for IT outsourcing. Write a short paper (2-4 paragraphs) explaining what the appeal would be for US companies to outsource IT functions to these countries. You may discuss cost, labor pool, language, or possibly government support as your reasons. There are many other reasons you may choose to highlight in your paper. Be sure to use your own words.
2.) Many believe that cloud computing can reduce the total cost of computing and enhance “green computing” (environmental friendly). Why do you believe this to be correct? If you disagree, please explain why?
.
1. Addressing inflation using Fiscal and Monetary Policy tools.S.docxaulasnilda
1. Addressing inflation using Fiscal and Monetary Policy tools.
Scenario - The US economy is currently experiencing high rates of inflation. You
have Fiscal and Monetary policy tools available to address this problem:
a. To attack the problem of inflation you must select one Monetary Policy
tool and one Fiscal Policy tool. Write down the name of your Fiscal Policy
tool and your Monetary Policy tool.
i. Think the options through and write down your choices.
b. Please explain why you selected the tools that you selected and why you did
not select the other choices? Do this for both monetary and fiscal policy
tools!
i. Specifically, explain what is so good about the tool you selected and what is not so
good about the tools you did not select? Do this for both the Monetary Policy tool
and the Fiscal Policy tool. The key here is to use some decision criteria in making
your choice.
c. Thoroughly and completely explain how your solution (both the monetary
and the fiscal policy tool) would work to solve the problem of inflation, and
indicate the impact your solution would have on at least 5 key economic
variables. Be specific.
i. Present this using the chain of events format with up or down arrows to indicate the
direction of impact on each variable. I need to see the detail.
2. Addressing recession using Fiscal and Monetary Policy tools.
Scenario - The US economy is currently experiencing recession. You have Fiscal
and Monetary policy tools available to address this problem:
a. To attack the problem of recession, you must select at least one Monetary
Policy tool and one Fiscal Policy tool. Write down the name of your Fiscal
Policy tool and your Monetary Policy tool.
i. Think the options through and write down your choices.
b. Please explain why you selected the tools that you selected and why you did
not select the other choices? Do this for both monetary and fiscal policy
tools!
i. Specifically, explain what is so good about the tool you selected and what is not so
good about the tools you did not select? Do this for both the Monetary Policy tool
and the Fiscal Policy tool. The key here is to use some decision criteria in making
your choice.
c. Thoroughly and completely explain how your solution (both monetary and
fiscal policy tools) would work to solve the problem of recession, and
indicate the impact your solution would have on the key economic
variables. Be specific.
i. Present this using the chain of events format with up or down arrows to indicate the
direction of impact on each variable. I need to see the detail.
3. Please list and explain the 4 key supply side growth factors we discussed, and
discuss the viability (do-ability) of each in terms of getting our economy growing
again, given that today our economy is not growing.
a. The slides should provide you with what you need here.
b. The issue of viability – if the economy is growing slowly or not at all, do we have any chance
of achieving suc.
1. A vulnerability refers to a known weakness of an asset (resou.docxaulasnilda
1. A vulnerability refers to a
known
weakness of an asset (resource) that can be exploited by one or more attackers. In other words, it is a known issue that allows an attack to succeed.
For example, when a team member resigns and you forget to disable their access to external accounts, change logins, or remove their names from company credit cards, this leaves your business open to both intentional and unintentional threats. However, most vulnerabilities are exploited by automated attackers and not a human typing on the other side of the network.
Testing for vulnerabilities is critical to ensuring the continued security of your systems. Identify the weak points. Discuss at least four questions to ask when determining your security vulnerabilities.
2.
Topic:
Assume that you have been hired by a small veterinary practice to help them prepare a contingency planning document. The practice has a small LAN with four computers and Internet access. Prepare a list of threat categories and the associated business impact for each. Identify preventive measures for each type of threat category. Include at least one major disaster in the plan. 200-300 words.
.
1. According to the readings, philosophy began in ancient Egypt an.docxaulasnilda
1. According to the readings, philosophy began in ancient Egypt and then spread to Greece.
True/False
2. This question is based on the presentation of logical concepts in the first reading.
Consider the following argument: "All chemists are Lutheran. Rita is Lutheran. So, Rita must be a chemist."
Is the argument …
Deductive & Invalid
Inductive & Valid
Deductive & Strong
Inductive & Weak
3. Would Socrates agree or disagree with the following statement:
Each of us invents his or her own truth and if you feel it in your heart and really want it to be true then don't listen to those who criticize your belief.
He would agree
He would disagree
4. According to the first reading, Thales asked some important "gateway" questions. Which of the following is not one of the gateway questions discussed in the reading:
Does the diverse range of things we experience have a single common explanation or cause?
Does God exist?
Is the universe intelligible?
5. Scientism is the belief that science is one of many paths to truth about the world.
True/False
6. Deductive arguments always aim to show
The conclusion is probably true
The conclusion must be true
7. In the type of argument known as _____, we begin with premises about a phenomenon or state of affairs to be explained; then we reason from those premises to an explanation for that state of affairs.
deduction
inference to the best explanation
syllogism
anaological induction
8. In the online lecture, the multiverse hypothesis is put forward by Stenger in support of theism.
True/False
9. According to the reading, the cosmic coincidences were known in ancient times.
True/False
10. According to the reading, the problem with Darwin's claim that his theory of natural selection explains all the order in nature is that no evolutionary process of natural selection is possible unless a background system of amazing complexity already exists; but since it must exist prior to any evolutionary process, it cannot be explained as the result of an evolutionary process.
True/False
11. Suppose we have two highly improbable hypotheses: H1 and H2. Suppose H2 is slightly less improbable than H1, all else equal.
According to the presentation of best explanation arguments in the reading, H2 presents a more reasonable explanation than H1.
True/False
12. According to the reading, the fine tuning argument shows that we can know with certainty that an intelligent designer exists.
True/False
13. According to the readings, science cannot possibly explain the source of the order in the universe.
True/False
14. The design argument is presented in the readings as an analogical argument and it is also presented as an inference to the best explanation.
True/False
15. According to the online readings, Ockham's Razor favors the multiverse theory over theism,
True/False
16. The proposition that Mount Rainier has snow on its peak would be an example of a proposition known to be true a priori.
True/False
17. Which of the foll.
1-Explain what you understood from the paper with (one paragraph).docxaulasnilda
1-Explain what you understood from the paper with (one paragraph)
2-What is a Lorenze curve and how is it disputed by Paglin
3-What is the method used in the paper and what can you say about the data used and the empirical aspect of the paper.
4-What other common measurements out there for measuring income inequality, poverty, and development gap.
.
1-Explanation of how healthcare policy can impact the advanced p.docxaulasnilda
1-Explanation of how healthcare policy can impact the advanced practice nurse profession
2-Explanation of why advocacy is considered an essential component of the advance practice nurse's role
3- Discuss the four pillars of Transformational leadership and the effect it may have on influencing policy change
Description
Explanation of how healthcare policy can impact the advanced practice nurse profession
Research healthcare policy for APNs on a state and national level and the impact on the APN profession
Explanation of why advocacy is considered an essential component of the advance practice nurse's role
Describe advocacy in healthcare terminology.
Discuss how advocacy is an essential role of the APN and the impact on patient care.
Discuss the four pillars of Transformational leadership and the effect it may have on influencing policy change
Define Transformational leadership.
Discuss how Transformational Leadership may have an effect on influencing policy change
Critically analyze how healthcare systems and APRN practice are organized and influenced by ethical, legal, economic and political factors.
Demonstrate professional and personal growth concerning the advocacy role of the advanced practice nursing in fostering policy within diverse healthcare settings.
Advocate for institutional, local, national and international policies that fosters person-centered healthcare and nursing practice.
All writing submitted should reflect graduate student quality and APA writing rules. All writing informed by outside sources should include APA formatted citations and associated scholarly, current references. 1500 words
.
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
How to Split Bills in the Odoo 17 POS ModuleCeline George
Bills have a main role in point of sale procedure. It will help to track sales, handling payments and giving receipts to customers. Bill splitting also has an important role in POS. For example, If some friends come together for dinner and if they want to divide the bill then it is possible by POS bill splitting. This slide will show how to split bills in odoo 17 POS.
Ethnobotany and Ethnopharmacology:
Ethnobotany in herbal drug evaluation,
Impact of Ethnobotany in traditional medicine,
New development in herbals,
Bio-prospecting tools for drug discovery,
Role of Ethnopharmacology in drug evaluation,
Reverse Pharmacology.
This is a presentation by Dada Robert in a Your Skill Boost masterclass organised by the Excellence Foundation for South Sudan (EFSS) on Saturday, the 25th and Sunday, the 26th of May 2024.
He discussed the concept of quality improvement, emphasizing its applicability to various aspects of life, including personal, project, and program improvements. He defined quality as doing the right thing at the right time in the right way to achieve the best possible results and discussed the concept of the "gap" between what we know and what we do, and how this gap represents the areas we need to improve. He explained the scientific approach to quality improvement, which involves systematic performance analysis, testing and learning, and implementing change ideas. He also highlighted the importance of client focus and a team approach to quality improvement.
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdfTechSoup
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
The Roman Empire A Historical Colossus.pdfkaushalkr1407
The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence.
The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth.
Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration.
The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority.
Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages.
Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.
The Indian economy is classified into different sectors to simplify the analysis and understanding of economic activities. For Class 10, it's essential to grasp the sectors of the Indian economy, understand their characteristics, and recognize their importance. This guide will provide detailed notes on the Sectors of the Indian Economy Class 10, using specific long-tail keywords to enhance comprehension.
For more information, visit-www.vavaclasses.com
The Art Pastor's Guide to Sabbath | Steve ThomasonSteve Thomason
What is the purpose of the Sabbath Law in the Torah. It is interesting to compare how the context of the law shifts from Exodus to Deuteronomy. Who gets to rest, and why?
Instructions for Submissions thorugh G- Classroom.pptxJheel Barad
This presentation provides a briefing on how to upload submissions and documents in Google Classroom. It was prepared as part of an orientation for new Sainik School in-service teacher trainees. As a training officer, my goal is to ensure that you are comfortable and proficient with this essential tool for managing assignments and fostering student engagement.
Instructions for Submissions thorugh G- Classroom.pptx
18th international scientific conference Business Logistics in.docx
1. 18th international scientific conference Business Logistics in
Modern Management
October 11-12, 2018 - Osijek, Croatia
SUPPLY CHAIN PERFORMANCE MEASUREMENT SYSTEM
OF LOGISTICS SERVICE PROVIDERS. A CONCEPTUAL
FRAMEWORK AND RESEARCH AGENDA
Rafał�Haffer
Nicolaus Copernicus University, Toruń, Poland
E-mail: [email protected]
Received: May 30, 2018
Received revised: June 25, 2018
Accepted for publishing: July 4, 2018
Abstract
Currently, intensified globalization and consequent competitive
pressures have
reemphasized the importance of logistics service providers
(LSPs) in managing
logistics processes as well as customer and supplier
relationships within the supply
chain management. This requires them to develop their business
performance
measurement systems (BPMSs) towards supply chain
performance measurement
systems (SCPMSs) a scope of which depends on the LSP
2. advancement thus whether
it operates as a third-party logistics (3PL) provider, a lead
logistics provider (LLP) or
a fourth party logistics (4PL) provider. However research on the
topic of LSP
SCPMSs remains scarce as it usually concentrates on SCPMSs
of the focal companies
orchestrating the whole supply chain (SC). At the same time
LSPs have an exceptional
impact on SC performance as the operators connecting the SC
links, and since they
operate within a portion of or the whole supply chains of the
sectors they serve, they
need to develop not only the internal BPMSs, but also the
external SCPMSs. The
present paper aims to consolidate knowledge on supply chain
performance
measurement systems perceived and developed from the
perspective of LSPs and
makes a three-fold contribution to the discussion. First, it
proposes the LSP SCPMS
definition. Second, it develops a research framework that
distinguishes key issues
which need consideration when examining the LSP SCPMSs,
namely the LSP
advancement, the LSP SCPMS components such as applied
subsystems, approaches,
ICT technologies and metrics including methods for metric
selection followed by the
LSP SCPMS adoption consequences, characteristics and life
cycle and finally
contextual factors constituting stimuli and barriers for the LSP
SCPMS development.
Then a research agenda is presented to guide future research on
the LSP SCPMSs.
This work is designed to inspire researchers to continue
3. expanding the knowledge
about how to develop high-performing SCPMSs for different
supply chain players
including LSPs.
Key words: LSP supply chain performance measurement system
(LSP SCPMS),
logistics service providers (LSPs), research framework
Supply chain performance measurement system of logistics
service providers. A conceptual framework…
Rafał�Haffer
86
1. INTRODUCTION
In�today’s�competitive�business�environment,�logistics�se
rvice�providers�(LSPs)�
play a critical role in the supply chains (SCs) of their customers
as the operators
connecting the supply chain links. Since they affect SC
performance they are
increasingly viewed as strategic partners who can play an
exceptional role in
improving SC performance and thereby provide a sustained
competitive advantage.
Hence, the growing tendency among firms from all sectors to
outsource their logistics
activities that are more costly and time consuming to LSPs
(Ellram et al., 2006).
Outsourcing these activities enables companies to reduce costs
and focus on their core
4. activities where they build a competitive advantage over
adversaries (Christopher,
2005). LSPs play also a key role in facilitating supply chain
integration (Mortensen
& Lemoine, 2008; Knemeyer & Murphy, 2004) and in some
cases even managing
entire supply chains (Jayaram & Tan, 2010). Many researchers
claim that supply chain
will not be effective unless logistics service providers do not
measure and monitor the
company performance in a flow of functions (such as
transportation and warehousing)
rather than individual activities (Robertson et al., 2002). To
manage the SC of their
customers effectively, LSPs need to analyse the data collected
from various sources
constantly and convert them into actionable information. This
requires them to
develop their business performance measurement systems
(BPMSs) towards supply
chain performance measurement systems (SCPMSs). The scope
of logistics processes
as�well�as�SC�members’� relationships�which�need�
to�be�measured�and�monitored�
within LSP SCPMS will depend on the LSP advancement thus
whether it operates as
a third-party logistics (3PL) provider, a lead logistics provider
(LLP) or a fourth party
logistics (4PL) provider. This means that along with the
evolution of logistics
outsourcing, particularly the emergence of 4PL providers whose
competency is
mainly to monitor supply chains, specifically supply chain
networks, there is also a
growing need for LSP SCPMS development.
5. According to the resource-
based�view�(RBV),�company’s�strategic� resources�
including tangible and intangible resources play a vital role in a
firm to generate
sustainable competitive advantage (Wernerfelt, 1984; Barney,
1991; Rumelt, 1991;
Peteraf, 1993, Teece et al., 1997; Hall, 1992). A performance
measurement system
(PMS), likewise a SCPMS, constitutes a bundle of strategic
resources which helps
companies to develop organizational capabilities (including
dynamic and ordinary
capabilities; see Teece et al., 1997) and enhance organizational
learning enabling
identification of areas of concern and success through
performance monitoring (Star
et al., 2016). In case of LSPs, these capabilities, the
development of which is mediated
by SCPMS, refer to as logistics service capabilities and
capabilities to shape and
exploit networks. The quality of these capabilities determines
the LSPs’� success,�
however it may also influence the success of other SC members.
The traditional RBV argues that supernormal earnings result
from resources
controlled by a single firm (Barney, 1991). However, the
relational view (Dyer and
Singh, 1998), an extension of RBV incorporating social network
theory (Eisenhardt
& Schoonhoven, 1996; Granovetter, 1985) has expanded this
focus, with scholarly
attention�beginning�to�recognise�the�importance�of�resou
rces�which�lie�outside�a�firm’s�
boundaries (Duschek, 2004; Mathews, 2003). Complementary
resource combinations
6. 18th international scientific conference Business Logistics in
Modern Management
October 11-12, 2018 - Osijek, Croatia
87
between partnering firms can be a source of their competitive
advantage, with the
idiosyncratic nature of the relational assets making it difficult
for competitors to
imitate (Gulati et al., 2000, via Cousins et al., 2008). This
means that collaborative
relationships within individual SCs and SC networks, which
have been rapidly
growing across many industries, may lead to the collaborative
advantage. Thus, since
a PMS can be a source of a competitive advantage of a single
firm e.g. a LSP, a
SCPMS may be considered within a framework of the
collaborative advantage (Dyer
& Singh, 1998), rather than one of the competitive advantage,
as influencing a SC
performance it may generate advantages to all SC actors. The
collaborative advantage
is a resource that requires a long-term orientation and may
ultimately create greater
benefits than a traditional zero-sum based approach to
competition (Dyer, 2000).
Through cooperation, partners can profit from rents that can
only be generated by
working jointly (Cousins et al., 2008). The ability of the LSP to
derive these relational
7. rents is at least, in part, dependent on how effective the LSP
SCPMS is in building
and leveraging collaborative partnerships with the SC.
The idea which is behind this conceptual paper is to inspire
researchers to
continue expanding the knowledge about how to develop high-
performing SCPMSs
for different supply chain players with the special emphasis on
LSPs. The paper is
organised as follows. The evolution of LSPs is described in
Section 2. Section 3
includes a discussion about the differences between BPMS and
SCPMS. An attempt
at conceptualizing the LSP SCPMS is made in Section 4.
Section 5 presents the LSP
SCPMS research framework and agenda and Section 6 ends the
paper with the
conclusion.
2. LOGISTICS SERVICE PROVIDERS
Logistics service providers, also called third-party logistics
(3PL) providers,
provide a variety of logistics related services, including, for
instance, transportation,
warehousing, distribution and freight consolidation (Domingues
et al., 2015). This
means that they are usually associated with the offering of
multiple, bundled logistics
services, rather than just isolated transport or warehousing
functions (Leahy et al.,
1995). An interesting point of view explaining the differences
between the first-,
second-, third- and fourth party logistics providers is presented
by Lu and Su (2002
8. via Krakovics, 2008). According to their work 1PL is a small
company that executes
its own logistics; 2PL is a provider of simple services, such as
storage or
transportation; 3PL is a logistics operator that offers a whole
range of services and
management. Its natural evolution is 4PL, which is the single
connection between a
customer and the logistics operators, being responsible for
hiring other 3PL and 2PL,
and managing the logistics process end-to-end. Van Hoek and
Chong (2001) define
4PL as a supply chain service provider that participates rather
in supply chain co-
ordination than operational services. It is highly information
based and co-ordinates
multiple asset-based players on behalf of its clients.
In view of the above, logistics service providers were initially
3PLs. However
more recently, a new generation of providers, called lead
logistics providers (LLPs)
and fourth party logistics (4PL) providers, have radically
altered the logistics industry.
Supply chain performance measurement system of logistics
service providers. A conceptual framework…
Rafał�Haffer
88
They notably offer complete logistics service without
necessarily possessing the
9. physical assets (means of transport, warehouses, etc.). These
providers are gradually
becoming orchestrators within individual supply chains and in
the supply chain
networks (Fulconis & Paché,� 2018).� As orchestrators, LLPs
and 4PL providers
organize and coordinate flows of products for shippers, by
mobilizing the logistical
capacities of a large number of subcontracting firms.
3PL providers specialize in execution of physical activities
linked to transport,
handling and storage of products for shippers. These activities
may be supplemented
by high added value activities like co-manufacturing, co-
packing, crossdocking,
pooling, reverse logistics, after-sales support and customer
service (e.g. customs
brokerage) (Jayaram & Tan, 2010). This means that 3PLs are
playing ever increasing
roles in extended supply chains transforming from movers of
goods to strategic value-
added entities, what does not change the fact that they generally
operate in the road
transport sector. Contemporary 3PL arrangements are based on
formal (both short-
and long-term) contractual relations as opposed to spot
purchases of logistics services
(Murphy & Poist, 1998).
By comparison, the activities of LLPs and 4PL providers are
executed by an LSP
that assembles its own resources, capacities and technologies,
and those of other
providers, to design and steer complex supply chains (DGITM,
2010 via Fulconis and
10. Paché, 2018). Whether they own the means of production,
warehouses and trucks
(case of LLP) or not (case of 4PL provider), these LSPs
mobilize their logistics
engineering competencies to optimize flows and select the best
providers. They are
thus stakeholders that coordinate activities between the shipper,
end customer and
sometimes other 3PL or 2PL providers. LLPs and 4PL providers
may be 3PLs that
diversify their offer, management consulting firms, supply chain
specialists (global
supply chain management) or IT services companies (Fulconis
& Paché,� 2018).�
Companies originally specializing in financial services, IT
services and management
consulting entered the market of logistics services by
developing competences in
information systems and supply chain planning (Selviaridis &
Spring, 2007).
The importance of LSP services has been continuously
increasing due to
growing number of firms and globalization of their business.
The flexibility in service,
accuracy in order, and on-time delivery are just prerequisites to
compete, while
delivery time reduction is real element for the best class
logistics networks (Bottani
& Rizzi, 2006 via Kumar, 2008).
3. BPMS VS SCPMS
The research results indicate that organizations applying
integrated performance
measurement system as a tool supporting management process
11. achieve better business
results than those which do not use it (Lingle & Schiemann
1996; Haffer, 2014).
Therefore, during the last decades business performance
measurement has been
arousing interest of researchers and practitioners of many
different disciplines in the
field of management such as strategic management, quality
management, operations
management, process management, human resources
management, information
systems management, marketing management, finance
management and management
18th international scientific conference Business Logistics in
Modern Management
October 11-12, 2018 - Osijek, Croatia
89
accounting. Each of these disciplines contributes to the
development of performance
measurement approaches, methodologies and systems.
At the same time, there is lack of consensus among the
representatives of the
mentioned disciplines about how to define business performance
measurement system
(Dumond, 1994). Diversity of the research carried out in the
field of performance
measurement makes it even more complicated. Such a thesis
may be well illustrated
by the BPMS definition review found in the literature (Franco-
12. Santos et al. 2007).
From an operations management point of view, performance
measurement system is
usually defined as a set of metrics used to quantify both
efficiency and effectiveness
of actions (Neely et al., 1995) which is very often defined from
four different
measurement perspectives: financial, customer, internal, as well
as learning and
growth (Kaplan & Norton 2004); or as the reporting process that
gives feedback to
employees on the outcome of actions (Bititci et al., 1997).
Strategic management
perspective makes it possible to capture two other aspects of the
BPMS. Firstly, it
reflects the procedures used to cascade down the business
performance measures used
to implement the strategy within the organization (Gates, 1999).
Secondly, the BPMS
provides the organization with the information necessary to
challenge the content and
validity of the strategy (Ittner et al., 2003). From a management
accounting
perspective, the BPMS is considered to be synonymous with
management planning
and budgeting (Otley, 1999).
The issue of measuring performance along the supply chain has
been raised,
probably for the first time, only in the late 90. of the previous
century (Van Hoek,
1998). Also, one of the first SCPMS frameworks was proposed
in 1999 (Beamon),
whereas previous articles had only focused on costing models
for inter-firm activities
(e.g. Cavinato, 1992; Ellram & Feitzinger, 1997).
13. The definition of SCPMS goes beyond the one of BPMS (see
Figure 1). While
a BPMS, according to the above-mentioned definition, is a set
of metrics used to
quantify the efficiency and effectiveness of actions aimed at
supporting the
implementation of strategies at various levels, a SCPMS is
defined as a set of metrics
used to quantify the efficiency and effectiveness of supply chain
processes and
relationships, spanning multiple organizational functions and
multiple firms and
enabling SC orchestration (Maestrini et al., 2017). Thus a
SCPMS is a much more
complex system comparing to a BPMS which is usually referred
to as one of the
SCPMS components namely the internal SCPMS. In such a case
its role is to monitor
and control the processes that take place
within�the�firm’s�boundaries�(the�source-
make-deliver sequence according to the SCOR model).
Instead, the external SCPMS is intended to monitor and control
the inter-firm
processes and relationships and can be further decomposed into
a supplier PMS and a
customer PMS (Maestrini et al., 2017). A supplier PMS can be
defined as a set of
metrics� measuring� the� efficiency� and� effectiveness�
of� suppliers’� actions� and� the�
goodness of the relationship with them (Hald & Ellegaard,
2011; Luzzini et al., 2014),
whereas a customer PMS as a set of metrics measuring the
efficiency and
effectiveness�of�customers’�actions�and�the�goodness�of
14. �the�relationship�with�them.�
Within external SCPMS companies usually focus on the
immediate supplier or
customer rather than encompassing multiple SC tiers (e.g.
supplier's suppliers or
customer's customers), because of technological barriers or
relational inertia (Barratt
Supply chain performance measurement system of logistics
service providers. A conceptual framework…
Rafał�Haffer
90
& Oke, 2007; Barratt & Barratt, 2011). Nevertheless, synthetic
information on critical
performance from various downstream or upstream parties
(avoiding information
overload) could improve the alignment of the extended SC, thus
achieving both
single-firm and overall SC objectives (Maestrini & Luzzini,
2015).
Lastly, many-to-many SCPMS which is a set of metrics used to
quantify both the
efficiency and the effectiveness of inter-firm processes shared
by multiple buyers and
multiple suppliers (Maestrini et al., 2017) needs to be indicated
as another category
of�external�SCPMS�according�to�the�most�recent�studie
s�(Stefanović� & Stefanović,�
2011, Raj & Sharma, 2015; Cecere, 2014). This type of SCPMS
can be found in such
industries as automotive, pharma and retail. In these cases the
15. SCPMS is usually
developed as a web- or cloud-based solution by a third-party IT
service provider for
the benefit of all supply chain actors and is promoted by a focal
company or an
industry association as a shared tool to solve specific SC
challenges. The system
enables a flexible many-to-many type of interaction, whereby it
can be decided which
type of information is shared and by whom (Maestrini et al.,
2017).
Supply chain performance measurement system of logistics
service providers. A conceptual framework…
Rafał�Haffer
92
4. LSP SCPMS – DEFINITION AND SUBSYSTEMS
Despite the increased interest in applying and improving
SCPMS, the number of
researchers investigating the whole life cycle (design,
implementation, use and
review) of SCPMSs is still not sufficient, as most works focus
on the SCPMS design
phase, with particular emphasis on the identification and
description of metrics
(Maestrini et al., 2017). In case of the most sophisticated
SCPMSs equipped with
external SCPMSs, such as multi-tier SCPMSs and many-to-
16. many SCPMSs, there is
no literature and research evidence or it is anecdotal (Maestrini
et al., 2017). There
are also only few studies in SCPMS referring to LSP industry
(e.g. Choy et al., 2008;
Kayakutlu & Buyukozkan, 2011; Jothimani & Sarmah, 2014), as
the majority of LSP
studies refer to BPMS, unlike SCPMS (Sun and Hu, 2010; Wong
et al., 2014; Wang
et al., 2015; Domingues et al., 2015; Joo & Yun, 2017). At the
same time, since LSPs
may operate within the whole supply chains of the sectors they
serve, they need to
develop not only the internal, but also the external SCPMSs.
Hence, LSPs, being a
strategic SC member of their customers, not only develop
critical performance
indicators set for assessing their logistics operations, but also
create a PMS for
measuring the capability of other members within the chain by
focusing on sub-
contracted�LSPs�and�customers’�suppliers�(Choy�et�al.,�
2008).�Thus�they�develop�the�
external subsystems of their SCPMSs which enable them to
orchestrate a whole or a
part of SC depending on their advancement as the LSPs,
reflected in three generations
of providers: from 3PL through LLP to 4PL.
If a LSP operates as a typical 3PL provider between at least two
links of the
supply chain i.e. connects the 3PL customer
with�customer’s�supplier�providing�them�
with a variety of logistics related services, then it may naturally
develop its PMS
towards first-tier external SCPMS such as first-tier PMS of
17. customers and customers'
suppliers as well as first-tier�LSP�suppliers’�PMS which
encompasses sub-contracted
LSPs. The scope of such a 3PL SCPMS is shown graphically in
Figure 2. Of course,
it may need to be extended along with growing number of
customers within the same
supply chain or the other ones.
If a 3PL provider evolves and becomes a lead logistics provider
(LLP) or a fourth
party logistics (4PL) provider, than its PMS also needs to be
upgraded. It can be
potentially supplemented with such external subsystems as first-
tier or multi-tier PMS
of customers and customers' suppliers, first-tier or multi-
tier�LSP�suppliers’�PMS�as�
well as many-to-many SCPMS. At the same time SCPMSs of
LLPs and 4PL providers
may encompass actors of different SCs making these providers
the orchestrators in
the supply chain networks (Fulconis & Paché,�2018). The
scope of a LLP/4PL SCPMS
is shown graphically in Figure 3.
18th international scientific conference Business Logistics in
Modern Management
October 11-12, 2018 - Osijek, Croatia
93
Figure 2. Scope of SCPMS for LSP: 3PL
18. Source: the author
Figure 3. Scope of SCPMS for LSP: LLP and/or 4PL
Source: Fulconis & Paché,�2018,�adapted�by�the�author
In view of the above, it is proposed to define a LSP SCPMS as a
set of metrics
used to quantify the efficiency and effectiveness of SC
processes and relationships,
spanning multiple organizational functions and multiple firms
and enabling a logistic
service provider to orchestrate a whole or a part of SC. The
definition and structure of
the LSP SCPMS along with a scope description of each
subsystem is presented in
Figure 4.
Taking into account the level of complexity that an LSP SCPMS
might reach,
the system is split into its different subsystems, as a single LSP
might be willing to
monitor not necessarily the entire set of processes involving all
the SC tiers but only
one portion of a supply chain it serves. Thus in the first layer
two subsystems are
distinguished, namely the internal and external SCPMSs. The
role of an internal
SCPMS�is� to�monitor�and�control� the�processes� that�
take�place�within� the� firm’s�
boundaries (the source-make-deliver sequence according to the
SCOR model) and
19. 18th international scientific conference Business Logistics in
Modern Management
October 11-12, 2018 - Osijek, Croatia
95
relationship among different organisational functions. In turn,
the external SCPMS is
intended to monitor and control the inter-firm processes and
relationships.
In the second layer only external SCPMS is further decomposed
into (i) a LSP
supplier�PMS,�(ii)�a�customer�PMS,�(iii)�a�customer’s�
supplier�PMS�and�(iv)�many-
to-many SCPMS. As regards three first foregoing components,
they can be defined as
a set of metrics measuring the efficiency and effectiveness of
actions of (i) LSP
suppliers,�(ii)�customers�and�(iii)�customers’�suppliers,�r
espectively,�and�the�goodness�
of the relationship with them. Instead, a many-to-many SCPMS
is a set of metrics
used to quantify both the efficiency and the effectiveness of
inter-firm processes
shared by multiple buyers and multiple suppliers. In this case
the SCPMS can be
developed as a web- or cloud-based solution by a third-party IT
service provider for
the benefit of selected or all supply chain actors and is
promoted by a logistics service
provider as a shared tool to solve specific SC challenges. In
case of 3PL providers
these actors could be only first-tier partners i.e. the LSP
20. suppliers such as the sub-
contracted carriers, the LSP customers and their suppliers. In
case of LLPs and 4PL
providers a many-to-many SCPMS could encompass multiple
SC tiers including LSP
suppliers’�suppliers,�LSP�customers’�customers
and�suppliers�of�customers’�suppliers.�
A distinction between the first-tier and multi-tier partners
included in the LSP SCPMS
is drawn in the third layer of the scheme presented in Figure 4.
As far as the issue of SCPMSs is concerned, it is necessary to
emphasize that the
existing frameworks usually take into consideration a
perspective of the focal actors
of supply chains. Thus, it is anticipated that the foregoing
definition of LSP SCPMS
and its subsystems, which focuses on the perspective of LSP
industry, may add value
to the scientific discussion about SCPMS development and
clarify the scope of the
further research.
5. CONCEPTUAL FRAMEWORK AND RESEARCH AGENDA
Now�that�the�definition�of�logistics�service�provider’s�s
upply�chain�performance�
measurement system was developed, a broad framework of LSP
SCPMS will be
proposed (see Figure 5). Elements in the framework include the
LSP advancement,
the LSP SCPMS components such as applied subsystems,
approaches, information
and communication technology (ICT) and metrics including
methods for metric
selection followed by the LSP SCPMS adoption consequences,
21. characteristics and life
cycle and finally contextual factors constituting stimuli and
barriers for the LSP
SCPMS development. These elements of the framework are
recognized as issues
worth considering in research on LSP SCPMSs. However it
should be stressed that
they are not fully complementary as they have some common
parts, e.g. ICT
technology used in LSP SCPMSs can be considered as the
contextual factor
determining the development of these systems or the methods
used for metric
selection in LSP SCPMSs are the foundation of uncertainty
theory based approach
applied in system design. Different configurations of the
framework components may
be used when designing a research and formulating research
questions. In the
following sections, a short description of each element of the
framework will be
provided as well as directions for further research will be
pointed out.
18th international scientific conference Business Logistics in
Modern Management
October 11-12, 2018 - Osijek, Croatia
97
The contextual factors constitute the overarching setting and are
22. listed on the
upper part of the framework. Contextual factors consist of
economic factors, such as
the level of economic development (developed economies,
economies in transition,
and developing economies), globalisation processes, economic
growth rates, financial
crises, levels of employment, interest rates or inflation rates;
legal factors (e.g.
consumer protection), political factors (political stability,
terrorism, tax policies, etc.),
socio-cultural factors (such as culture, demographic
distribution, population growth
rates, lifestyle changes), technological factors (level of
digitalization, accessibility of
ICT technology including state of fintech, etc.), and industry
factors (competitive
pressure, customer requirements' evolution, etc.). Within a
group of these factors
stimuli and barriers for the LSP SCPMS development may
occur.
As regards the LSP advancement (described in chapter 2) it is
interesting how
the LSP SCPMSs differ depending on whether a logistics
service provider operates as
a third-party logistics provider, a lead logistics provider or a
fourth party logistics
provider. These differences may concern the approaches
adopted, subsystems
developed (described in chapter 4), ICT technology used as well
as methods for
metrics selection applied. Especially an application of the
external SCPMSs needs to
be recognised. More probably 3PLs develop first-tier PMSs and
LLPs as well as 4PLs
23. apply multi-tier PMSs, however this should be examined. The
question is also how
great an insight into the operations of the SC partners on the
next tiers is needed in
order to manage effectively the SC information and material
flow. Do LSPs apply
many-to-many SCPMSs on first-tier level or maybe only on
multi-tier level? Do they
develop web- or cloud-based solutions by themselves or they
outsource them from a
third-party IT service provider. What kind of ICT technology
they use to assure access
to real-time data and efficient SC management?
The LSP SCPMS approaches determine the types of metrics to
be adopted and
the SCPMS component to be tackled. According to Maestrini et
al. (2017) the SCPMS
approaches recurring most often in the literature include the
following:
� Supply chain balanced scorecard (SCBSC). The well-known
four dimensions of
the BSC developed by Kaplan & Norton (1992) (i.e. finance,
customer, internal
business process, learning and growth) are shaped according to
the scope of
supply chain management (SCM), by considering: SCM goals,
end-customer
benefit, financial benefit, SCM improvement. The idea behind
the SCBSC is to
design an SC strategy coherent with the business strategy,
including critical
success factors within the four performance dimensions above.
� SCOR-based. The supply chain operations reference (SCOR)
24. model developed
by the Supply Chain Council (SCC) in 1996 is an important
reference for both
researchers and practitioners in the area of SCM. An SCOR-
based SCPMS
provides a balanced set of performance measures: cycle time
metrics, cost
metrics, service quality metrics and asset metrics. These metrics
are then
grouped according to the five distinctive management processes,
namely plan,
source, make, deliver and return. In some cases metrics are also
classified
according to their strategic, tactical or operational nature. This
approach aims to
link the internal SC (make) with the external upstream (source),
downstream
(deliver) and return (reverse) SC.
Supply chain performance measurement system of logistics
service providers. A conceptual framework…
Rafał�Haffer
98
� Resource output flexibility. This approach is based on the
above-mentioned
work of Beamon (1999). Three performance areas are
considered: resources
(various dimensions of cost are monitored, e.g. distribution
cost, manufacturing
cost, with the purpose of fostering efficiency); output (various
dimensions of
25. customer service are reported); flexibility (it measures the
ability to respond to
a changing environment). This approach is thought to assess the
SCM
capabilities of a specific firm and keeps a mainly internal
perspective.
� Process-based. The unit of analysis is the supply chain
process: demand
management, order fulfilment, manufacturing flow management,
procurement,
demand forecasting and so on. Quantitative and qualitative
performance
measures to assess the efficiency and effectiveness of each
supply chain process
are proposed. These processes entail activities performed by
different actors and
thus include multiple firms in the evaluation process.
Najmi et al. (2013) in their proposal of the SCPMS approaches
point out like
Maestrini et al. (2017) three identical approaches, namely, the
process-based as well
as SCBSC and SCOR-based approaches, with the last two under
the perspective-based
brand, as well as three additional approaches which are as
follows:
� Hierarchical based. An example of this approach is a use of
the hierarchical
metrics. In this case they are classified into strategic, tactical
and operational
levels of management. They can be next grouped in cells at the
intersection of
planning level and the supply chain activity (i.e. plan, source,
make/assemble,
26. and deliver) or the category of BSC (i.e. finance, customer,
internal business
process, learning and growth).
� Six sigma based. Six-sigma approach was developed by
Motorola in 1987 (Xu,
2008). The six-sigma metrics can be used for performance
measuring of various
processes and entities on a common scale and for benchmarking
against world-
class standards. Six-sigma approach makes it possible to
measure the overall
performance of supply chain system processes and cascade
down to the lowest
level, where those activities of a sub process within an
individual organization
process take place. The common six-sigma metrics are dpo
(defects per
opportunity), dpu (defects per unit), z-value or the sigma value,
throughput yield,
rolled throughput yield, etc.
� Uncertainty theory based. The models of SC performance
evaluation system
which are developed on the basis of this approach are expected
to consider fuzzy
environment. For this purpose the authors apply different
methods such as a
fuzzy set theory model (Chan & Qi, 2003) favouring fuzzy
ratios for selecting
measures, a fuzzy preference matrix (Parkan & Wang, 2007) to
derive decision
makers’�subjective�ranking�of�the�metrics�or�a�fuzzy�r
esolution�approach�(Chen�
and Larbani, 2005) to focus on the SC performance with respect
to various
27. alliances among partners.
The next issue in the proposed framework are the methods used
in LSP SCPMSs
for metric selection. Concerning the metrics, most approaches
entail both financial
and non-financial as well as both quantitative and qualitative
metrics. In this respect,
a consistent stream of literature addresses the process of metric
selection in SCPMSs,
proposing the application of mathematical algorithms and
techniques. Some of them
were mentioned above when describing uncertainty theory based
approaches to
18th international scientific conference Business Logistics in
Modern Management
October 11-12, 2018 - Osijek, Croatia
99
system design. According to Maestrini et al. (2017) the
techniques that literature most
often refers to are as follows:
� Analytic hierarchy process (AHP). AHP method, proposed by
Saaty (2008), is a
widely used method for decision making. It is a framework for
structuring a
decision problem, for representing and quantifying its elements,
for relating
those elements to the overall goals and for evaluating
alternative solutions by
28. pairwise comparison. It has been used several times to help
decision makers in
KPI selection. When the AHP is performed in a fuzzy
environment, application
of fuzzy AHP (FAHP) is recommended.
� Questionnaires. A method consisting of a series of questions
with the purpose of
gathering information from different respondents and making a
proper synthesis
to guide decision making.
� Analytic network process (ANP). The ANP is a more general
form of the AHP
used in multi-criteria decision analysis. The AHP structures a
decision problem
into a hierarchy with a goal, decision criteria and alternatives;
on the other hand,
the ANP structures the decision problem as a network of
possibilities. Like the
AHP, it is developed through a system of pairwise comparisons
to measure the
weights of the components of the structure and finally to rank
the alternatives in
the decision. When the ANP is performed in a fuzzy
environment, application
of fuzzy ANP (FANP) is recommended.
� Technique for order preference by similarity to ideal solution
(TOPSIS).
TOPSIS is proposed by Chen & Hwang (1992) and is one of the
principal
techniques for MCDM problems. The TOPSIS method is used
for normalization
and final ranking. It defines two kinds of solutions: the ideal
solution, and the
29. negative ideal solution. The ideal solution is regarded as the
maximal benefits
solution; it consists of all best values of criteria. On the
contrary, the negative
ideal solution is treated as the minimal benefits solution; it is
composed of all
worst values of criteria. TOPSIS defines solutions as the points
which are nearest
to the ideal point and farthest from the negative ideal solution
at the same time.
(Jothimani and Sarmah, 2014). This technique can be applied to
compensate for
the imprecise ranking of the AHP.
Najmi et al. (2013) in their proposal of the methods used in LSP
SCPMSs for
metric selection point out like Maestrini et al. (2017) AHP as
well as five additional
techniques which are as follows:
� Simulation. The main objective of using the simulation
technique for SC
performance evaluation and modelling is learning about the
interrelations among
parameters in the SC. Such a supply chain simulation study can
be used, for
example, to evaluate alternative supply chain designs with
respect to quality,
lead-times and costs as the key performance parameters
(Persson & Olhager,
2002).
� Data envelopment analysis (DEA). There are diverse
applications of DEA in the
SC performance evaluation process, e.g. it can be used as a tool
for measuring
30. SC efficiency (technical and cost ones) based on inputs and
outputs variables
(Wong & Wong, 2007) or as a benchmarking tool for supply
chain performance
measurement (Wong & Wong, 2008).
Supply chain performance measurement system of logistics
service providers. A conceptual framework…
Rafał�Haffer
100
� Delphi. This technique can be utilized to tackle the SC
performance evaluation
problem. The Delphi technique is a systematic, interactive
forecasting method,
which allows obtaining forecasts from an independent panel of
experts, over two
or more rounds. An example of Delphi technique application
can be the study of
Bigliardi and Bottani (2010) where authors adopted this
technique with the aim
of obtaining a high degree of consensus on the key performance
indicators to be
included in a model for the food supply chain management.
� Heuristic techniques. Heuristic techniques are not a formal
problem-solving
model as such, but can be used as an approach to problem
solving, where
solutions are not expected to produce a perfect or optimal
solution. They find
application also in the SC performance evaluation. The study of
31. Angerhofer and
Angelides (2006) is a good example of heuristic techniques
utilization. The
authors modelled the constituents (i.e. topology, levels of
collaboration of the
stakeholders, processes, supporting technology, and the
business strategy
employed) of a collaborative supply chain, key parameters they
influence and
performance indicators.
� Hybrid techniques. When developing the models for SC
performance
measurement also hybrid techniques can be used, e.g. the
Choquet integral
operator and MACBETH techniques extended by considering
the SCOR model
break-down for expressing the overall performance of a SC
(Berrah & Cliville´,�
2007).
The next element of the presented framework is ICT technology
used in LSP
SCPMS. According to various authors (Choy et al., 2008;
Maestrini et al., 2017; Tan
et al., 2006), diverse information technology solutions are being
used in SCPMSs to
quickly and reliably collect and analyse data, starting with basic
technologies and
ending with more advanced, namely RFID, Internet of Things
(IoT), artificial
intelligence (AI) tools, big data, Business Intelligence (BI)
analytics and web-based
or cloud-based platforms, which are able to interface with
traditional ERP systems.
Indeed, the role of ICT technology is of primary importance to
32. configure and
implement any PMSs and external SCPMSs in particular
(Nudurupati et al., 2011).
To measure supply chain performance in the LSP industry, firms
need to
incorporate parameters on operations efficiency and service
effectiveness to ensure
that they have a balanced framework (Lai et al., 2004). Also, a
more symmetrical
balance between internally focused and externally oriented
measures is needed for the
design of performance measurement system in the SCM (Choy
et al., 2008).
Additionally, as LSPs offer their customers a wide range of
logistics services such as
transportation, warehousing, inventory management, etc., which
may be partially or
fully sub-contracted and preferably are integrated, or bundled
together, by the
provider, there is a need to measure and monitor the company
performance in a flow
of foregoing functions rather than individual activities. At the
same time it is shown
by a recent literature survey on logistics and supply chains that
there is still a big gap
on reconsidering inter-functional and inter-company measures
(Sachan & Datta,
2005). It all makes the complexity of LSP SCPMS need to grow.
Therefore, the role of a real-time Business Intelligence (BI)
approach to SC
analytics, supporting firms such as LSPs that are service
oriented and seeking
customer loyalty and retentions, cannot be overestimated.
(Jothimani & Sarmah,
33. 18th international scientific conference Business Logistics in
Modern Management
October 11-12, 2018 - Osijek, Croatia
101
2013). Lastly, also AI tools, IoT, big data and web-based or
cloud-based platforms
have� played� an� increasingly� important� role� in�
today’s� industrial� applications� as�
facilitators of the SC performance measurement process (Tan et
al., 2006, Maestrini
et al., 2017).
As regards the next element of the prososed framework which is
SCPMS life
cycle, when conducting a research in LSP SCPMSs all four
stages of their life cycle
shoud be taken into account, namely (Neely et al., 1995; Braz,
et al., 2011): (i) SCPMS
design: answering the questions of what to measure and how to
select the limited set
of metrics, information on the unit of analysis of the
measurement process, the
performance dimensions to tackle, the specific metrics to adopt,
the overall SCPMS
approach; (ii) SCPMS implementation: the procedures to follow
to put the SCPMS in
place; (iii) SCPMS use: actions stimulated by the measurement
process; (iv) SCPMS
review: the process of reviewing performance measures and
targets.
34. Another proposal is to examine LSPs for the characteristics of
their SCPMSs.
Franco-Santos et al. (2007) provide the main characteristics of a
PMS: features
(properties or elements); roles (purposes or functions); and
processes (series of actions
that constitute a PMS). The features are the performance
measures and the supporting
infrastructure, which can vary from manual to automated
mechanisms, to acquire,
collate, sort, analyse, interpret, and disseminate appropriate
information to the
decision makers. There are five roles: (i) measuring
performance, (ii) strategy
management, (iii) communication, (iv) influencing behaviour,
and (v) learning and
improvement. The processes can be grouped into five
categories: (i) selection and
design of measures, (ii) collection and manipulation of data,
(iii) information
management, (iv) performance evaluation and rewards, and (v)
system review (Braz,
et al., 2011). It would be interesting to determine these
characteristics for LSP
SCPMSs.
The last component of the proposed research framework are LSP
SCPMS
adoption consequences. According to Maestrini et al. (2017)
they include: (i) the
outcomes of implementing and using SCPMSs; (ii) the impact of
LSP SCPMS on SC
performance including operational and business performance of
LSP and other SC
actors; (iii) the impact of (external) LSP SCPMSs on
35. relationship capabilities (e.g.
collaboration, trust, commitment, SC integration); (iv) barriers
and criticalities of the
adoption.
A research agenda on LSP SCPMSs including possible research
questions is
presented in Table 1.
Table 1. Research agenda on LSP SCPMSs
Possible research questions SCPMS life
cycle stage
Research
method
Approach
What is the level of LSP SCPMSs
advancement as regards applied
subsystems, approaches, ICT
technologies, metrics including
methods for metric selection as well
as characteristics (features, roles and
processes)?
Design Survey Theory
testing
Supply chain performance measurement system of logistics
service providers. A conceptual framework…
Rafał�Haffer
36. 102
What is the impact of a LSP
advancement on a LSP SCPMS
advancement?
Design Survey Theory
testing
How do LSP SCPMSs vary
depending on a generation level of
LSP (3PL, LLP or 4PL)?
Design and
implementation
Case
study
(multiple)
Theory
building
How do LSPs design and implement
their external SCPMSs including
first-tier PMSs, multi-tier PMSs and
many-to-many SCPMSs as regards
such issues as: an ICT system
infrastructure, a scope: single supply
chain process vs multiple supply
chain processes and roles and
attitudes of different supply chain
tiers on the platform?
Design and
implementation
37. Case
study
Theory
building
What are the stimuli and barriers to
LSP SCPMS development?
Implementation
and use
Survey Theory
testing
How do LSPs deal in their SCPMSs
with such issues as: reliability of data
collection and performance
calculation; frequency and formality
of the reporting; systematic review of
metrics and targets?
Implementation
and review
Survey
Case
study
Theory
testing
Theory
building
38. What is the impact of LSP SCPMS
on SC performance including
operational and business performance
of LSP and other SC actors?
Implementation
and use
Survey Theory
testing
What is the impact of (external) LSP
SCPMS on supply network
relationships (companies on different
tiers, companies within the same tier)
and relationship capabilities (e.g.
collaboration, trust, commitment, SC
integration, etc.)?
Implementation
and use
Survey Theory
testing
Source: the author (based on Maestrini et al., 2017)
6. CONCLUSION
The LSPs are changing. They are becoming indispensable
entities in supply
chain monitoring, and even in the implementation of business-
to-business cooperation
strategies whose organizational response corresponds to specific
structural forms
39. (Fulconis and Paché,� 2018).� Well� known� for� almost�
30� years,� these� forms� are�
described as network organizations or virtual organizations
(Christopher, 2016). This
means that advanced LCPs are able today to radically transform
the organization and
18th international scientific conference Business Logistics in
Modern Management
October 11-12, 2018 - Osijek, Croatia
103
functioning of supply chains. Especially LLPs and 4PL
providers are capable of using
their acquired monitoring expertise to implement innovative
logistical architectures
without the need to possess multiple physical assets, or
resources (Fulconis�and�Paché,�
2018). This expertise is obviously based on their ability to
acquire, collate, sort,
analyse, interpret, and disseminate appropriate information to
the decision makers
within the whole supply chain network. LSPs develop this
ability through their
SCPMS development enabling integrated evaluation of
information and material
flow.
This work was designed to inspire researchers to continue
expanding the
knowledge about how to develop high-performing SCPMSs for
different supply chain
40. players including LSPs. An application of the proposed
framework may help in better
understanding of how LSPs develop their SCPMSs and what the
impact of them is on
SC performance, supply network relationships and relationship
capabilities.
7. REFERENCES
Angerhofer, B.J. & Angelides, M.C. (2006). A model and a
performance
measurement system for collaborative supply chains. Decision
Support Systems, 42,
p. 283-301.
Barney, J.B. (1991). Firm Resources and Sustained Competitive
Advantage. Journal
of Management, 17(1), p. 99-120.
Barratt, M. & Barratt, R. (2011). Exploring internal and
external supply chain
linkages: evidence from the field. Journal of Operations
Management, 29(5), p. 514-
528.
Barratt, M. & Oke, A. (2007). Antecedents of supply chain
visibility in retail supply
chains: a resource-based theory perspective. Journal of
Operations Management, 25,
p. 1217-1233.
Beamon, B.M. (1999). Measuring supply chain performance.
International Journal of
Operations and Production Management, 19(3), p. 275-292.
Berrah,�L.�&�Cliville´,�V.�(2007).�Towards an
41. aggregation performance measurement
system model in a supply chain context. Computers in Industry,
58, p. 709-719.
Bigliardi, B. & Bottani, E. (2010). Performance measurement in
the food supply
chain: a balanced scorecard approach. Facilities, 28(5/6), p.
249-260.
Bititci U.S., Carrie A.S. & Mcdevitt L. (1997). Integrated
performance measurement
systems: a development guide. International Journal of
Operations & Production
Management, 17(5&6), p. 522-535.
Bottani, E. & Rizzi, A. (2006). A fuzzy TOPSIS methodology to
support outsourcing
of logistics services. Supply Chain Management: An
International Journal, 11(4), p.
294-308.
Supply chain performance measurement system of logistics
service providers. A conceptual framework…
Rafał�Haffer
104
Braz, R.G.F., Scavarda, L.F. & Martins, R.A. (2011). Reviewing
and improving
performance measurement systems: An action research.
International Journal of
Production Economics, 133, p. 751-760.
42. Cavinato, J.L. (1992). A total cost/value model for supply chain
competitiveness.
Journal of Business Logistics, 13(2), p. 285-301.
Cecere, L. (2014). Building business-to-business supply chain
networks. Supply
Chain Insights, p. 1-30.
Chan, F.T.S. & Qi, H.J. (2003). An innovative performance
measurement method for
supply chain management. Supply Chain Management: An
International Journal,
8(3/4), p. 209-223.
Chen, S.J. & Hwang, C.L. (1992). Fuzzy Multiple Attribute
Decision Making:
Methods and Applications, Berlin: Springer-Verlag.
Chen, Y.W. & Larbani, M. (2005). Simulating the performance
of supply chain with
various alliances. International Journal of Advanced
Manufacturing Technology, 25,
p. 803-810.
Chopra, P.K. (Ed.). (2014). Quality, Excellence and
Measurement. A tribute to
Professor Gopal K. Kanji. Leeds: Wisdom House Publications,
p. 269-290.
Choy, K.L., Chow, H.K.H., Tan, K.H., Chan, C.-K., Mok,
E.C.M. & Wang, Q. (2008).
Leveraging the supply chain flexibility of third party logistics -
Hybrid knowledge-
based system approach. Expert Systems with Applications,
35(4), p. 1998-2016.
43. Christopher, M. (2016). Logistics and supply chain
management, 5th edition, Harlow:
FT Publishing.
Christopher, M. (2005). Logistics and Supply Chain
Management - Strategies for
Reducing Cost and Improving Service, 3rd Edition, Financial
Times/Prentice Hall.
Cousins, P.D., Lawson, B. & Squire, B. (2008). Performance
measurement in strategic
buyer-supplier relationships. The mediating role of socialization
mechanisms.
International Journal of Operations & Production Management,
28(3), p. 238-258.
Domingues,�M.L.,�Reis,�V.�&�Macário,�R.�(2015).�A�c
omprehensive�framework�for�
measuring performance in a third-party logistics provider.
Transportation Research
Procedia, 10, p. 662-672.
Dumond E.J. (1994). Making best use of performance-measures
and information.
International Journal of Operations & Production Management,
14(9), p. 16-31.
Duschek, S. (2004). Inter-firm resources and sustained
competitive advantage.
Management Revue, 15(1), p. 53-73.
Dyer, J.H. & Singh, H. (1998). The relational view: cooperative
strategy and sources
of interorganizational competitive advantage. Academy of
Management Review,
23(4), p. 660-679.
44. Dyer, J.H. (2000). Collaborative Advantage: Winning through
Extended Enterprise
Supplier Networks, Oxford: Oxford University Press.
18th international scientific conference Business Logistics in
Modern Management
October 11-12, 2018 - Osijek, Croatia
105
Eisenhardt, K.M. & Schoonhoven, C.B. (1996). Resource-based
view of strategic
alliance formation: strategic and social effects in
entrepreneurial firms. Organization
Science, 7(2), p. 136-150.
Ellram, L. M., Stock, J. R., Lambert, D. M. & Grant, D. B.
(2006). Fundamentals of
Logistics Management, European edition: McGraw‑Hill.
Ellram, L.M. & Feitzinger, E. (1997). Using total profit analysis
to model supply chain
decisions. Journal of Costing Management, 8(1), p. 1-14.
Franco-Santos M., Kennerley M., Micheli P., Martinez V.,
Mason S., Marr B., Gray
D. & Neely A. (2007). Towards a definition of business
performance measurement
system. International Journal of Operations & Production
Management, 27(8), p.
784-801.
45. Fulconis,�F.�&�Paché,�G.�(2018).�Supply�chain�monitori
ng:�LLPs�and�4PL�providers�
as orchestrators. Procedia - Social and Behavioral Sciences,
238, p. 9-18.
Gabus, A. & Fontela, E. (1973). Perceptions of the World
Problem Atique:
Communication Procedure. Communicating with Those Bearing
Collective
Responsibility. DEMATEL Report No.1, Geneva: Battelle
Geneva Research Centre.
Gates S. (1999). Aligning Strategic Performance Measures and
Results, New York:
The Conference Board.
Granovetter, M.S. (1985). Economic action and social structure:
the problem of
embeddedness. American Journal of Sociology, 9(3), p. 481-
510.
Gulati, R., Nohria, N. & Zaheer, A. (2000). Strategic networks.
Strategic Management
Journal, 21(3), p. 203-15.
Haffer, R. (2014). Business performance measurement systems
versus business results
and business excellence. The case of Poland, In Chopra, P.K.
(Ed.). Quality,
Excellence and Measurement. A tribute to Professor Gopal K.
Kanji. Leeds: Wisdom
House Publications, p. 269-290.
Hald, K.S. & Ellegaard, C. (2011). Supplier evaluation
processes: the shaping and
46. reshaping of supplier performance. International Journal of
Operations and
Production Management, 31(8), p. 888-910.
Hall, R. (1992). The strategic analysis of intangible resources.
Strategic Management
Journal, 13(1), p. 135-144.
Ittner C., Larcker D. & Randall T. (2003). Performance
implications of strategic
performance measurement in financial service firms.
Accounting, Organizations and
Society, 28(7&8), p. 715-741.
Jayaram, J. & Tan, K.-Ch. (2010). Supply chain integration with
third-party logistics
providers, International Journal of Production Economics, 125,
p. 262-271.
Joo, S.-J. & Yun, G. (2017). Examining the influence of
information system ratings
on the performance of 3PL companies. International Journal of
Logistics Systems and
Management, 26(3), p. 316-328.
Supply chain performance measurement system of logistics
service providers. A conceptual framework…
Rafał�Haffer
106
Jothimani, D. & Sarmah, S.P. (2014). Supply chain performance
measurement for
47. third party logistics. Benchmarking, 21(6), p. 944-963.
Kaplan R.S. & Norton D.P. (2004). Strategy Maps: Converting
Intangible Assets into
Tangible Outcomes, Boston: Harvard Business School Press.
Kaplan, R.S. & Norton, D.P. (1992). The balanced scorecard -
measures that drive
performance. Harvard Business Review. 70, p. 71-79.
Kayakutlu, G. & Buyukozkan, G. (2011). Assessing
performance factors for a 3PL in
a value chain. International Journal of Production Economics,
131, p. 441-452.
Knemeyer, A.M. & Murphy, P.R. (2004). Evaluating the
performance of third-party
logistics arrangements: a relationship marketing perspective.
Journal of Supply Chain
Management, 40(1), p. 35-51.
Krakovics, F., Leal, J.E., Mendes Jr., P. & Santos, R.L. (2008).
Defining and
calibrating performance indicators of a 4PL in the chemical
industry in Brazil.
International Journal of Production Economics, 115, p. 502-514.
Kumar, P. (2008). An integrated model of AHP and TOPSIS for
3PL evaluation. Asia-
Pacific Business Review, IV (3), p. 14-21.
Lai, K.-H., Ngai, E.W.T. & Cheng, T.C.E. (2004). An empirical
study of supply chain
performance in transport logistics. International Journal of
Production Economics,
87(3), p. 321-331.
48. Leahy, S.E., Murphy, P.R. & Poist, R.F. (1995), Determinants
of successful logistical
relationships: a third party provider perspective. Transportation
Journal, 35(2), p. 5-
13.
Lingle J.H. & Schiemann W.A. (1996). From balanced scorecard
to strategy gauge.
Is measurement worth it? Management Review, March, p. 56-
62.
Lu, H. & Su, Y. (2002). An approach towards overall supply
chain efficiency.
(Unpublished
Master�Thesis).�School�of�Economics�and�Commercial�L
aw,�Göteborg�
University.
Luzzini, D., Caniato, F. & Spina, G. (2014). Designing vendor
evaluation systems: an
empirical analysis. Journal of Purchasing & Supply
Management, 20(2), p. 113-129.
Maestrini, V. & Luzzini, D. (2015). Supply chain performance
measurement system
lifecycle. Academy of Management Proceedings, 1, 11530.
Maestrini, V., Luzzini, D., Maccarrone, P. & Caniato, F. (2017).
Supply chain
performance measurement systems: A systematic review and
research agenda.
International Journal of Production Economics, 183, p. 299-315.
Mathews, J.A. (2003). Competitive dynamics and economic
learning: an extended
49. resource-based view. Industrial and Corporate Change, 12 (1),
p. 115-45.
Mortensen, O. & Lemoine, O.W. (2008). Integration between
manufacturers and third
party logistics providers? International Journal of Operations &
Production
Management, 28(4), p. 331-359.
18th international scientific conference Business Logistics in
Modern Management
October 11-12, 2018 - Osijek, Croatia
107
Murphy, P.R. & Poist, R.F. (1998), Third-party logistics usage:
an assessment of
propositions based on previous research, Transportation
Journal, 37(4), p. 26-35.
Najmi, A., Gholamian, M.R., Makui, A. (2013). Supply chain
performance models:
A literature review on approaches, techniques, and criteria.
Journal of Operations and
Supply Chain Management, 6(2), July-December, p. 94-113.
Neely A., Gregory M.J. & Platts K. (1995). Performance
measurement system design:
a literature review and research agenda. International Journal of
Operations &
Production Management, 15(4), p. 80-116.
Nudurupati, S.S., Bititci, U.S., Kumar, V. & Chan, F.T.S.
50. (2011). State of the art
literature review on performance measurement. Computers &
Industrial Engineering.
60(2), p. 279-290.
Otley D.T. (1999). Performance management: a framework for
management control
systems research. Management Accounting Research, 10(4), p.
363-382.
Parkan, C. & Wang, J. (2007). Gauging the performance of a
supply chain.
International Journal of Productivity and Quality Management,
2(2), p. 141-176.
Persson, F., Olhager, J. (2002). Performance simulation of
supply chain designs.
International Journal of Production Economics, 77(3), p. 231-
245.
Peteraf, M.A. (1993). The cornerstones of competitive
advantage: a resource-based
view. Strategic Management Journal, 14(3), p. 179-191.
Raj, S. & Sharma, A. (2015). Supply chain management in the
cloud: how can cloud
based computing make supply chains more competitive?
Accenture Report, p. 1-11.
Rumelt, R.P. (1991). How much does industry matter? Strategic
Management
Journal, 12(3), p. 167-185.
Saaty, T.L. (2008). Decision making with the analytic hierarchy
process. International
Journal of Services Sciences. 1(1), p. 83-98.
51. Sachan, A. & Datta, S. (2005). Review of supply chain
management and logistics
research. International Journal of Physical Distribution &
Logistics Management.
35(9), p. 664-705.
Selviaridis, K. & Spring, M. (2007). Third party logistics: a
literature review and
research agenda. The International Journal of Logistics
Management, 18(1), p. 125-
150.
Star, S., Russ-Eft, D., Braverman, M.T. & Levine, R. (2016).
Performance
Measurement and Performance Indicators: A Literature Review
and a Proposed
Model for Practical Adoption. Human Resource Development
Review, 15(2), p. 151-
181.
Stefanović,� N.� &� Stefanović,� D.� (2011).� Supply�
chain� performance� measurement�
system based on scorecards and web portals. Computer Science
and Information
Systems, 8(1), p. 167-192.
Supply chain performance measurement system of logistics
service providers. A conceptual framework…
Rafał�Haffer
108
52. Sun, X. & Hu, S. (2010). The application of BSC in the TPL
enterprise performance
evaluation, Logistics and Supply Chain Research in China -
Proceedings of the 3rd
International Conference on Logistics and Supply Chain
Management, ILS, p. 328-
333.
Tan, K., Lim, C., Platts, K. & Koay, H. (2006). Managing
manufacturing technology
investments: An intelligent learning system approach.
International Journal of
Computer Integrated Manufacturing, 19(1), p. 4-13.
Teece, D., Pisano, G. & Shuen, A. (1997). Dynamic Capabilities
and Strategic
Management. Strategic Management Journal, 18(7), p. 509-533.
Van Hoek, R.I. & Chong, I. (2001). Epilogue: UPS logistics –
practical approaches to
the e-supply chain, International Journal of Physical
Distribution & Logistics
Management, 31(6), p. 463-468.
Van Hoek, R.I. (1998). Measuring the unmeasurable -
Measuring and improving
performance in the supply chain. Journal of Supply Chain
Management, 3, p. 187-
192.
Wang, M., Jie, F. & Abareshi, A. (2015). Business Logistics
Performance
Measurement in Third-Party Logistics: An Empirical Analysis
of Australian Courier
Firms. International Journal of Business and Information, 10(3),
p. 323-336.
53. Wernerfelt, B. (1984). A resource-based view of the firm.
Strategic Management
Journal, 5, p. 171-180.
Wong, D.W.C., Choy, K.L., Chow, H.K.H. & Lin, C. (2014).
Assessing a cross-
border logistics policy using a performance measurement
system framework: The
case of Hong Kong and the pearl river delta region.
International Journal of Systems
Science, 45(6), p. 1306-1320.
Wong, W.P. & Wong, K.Y. (2007). Supply chain performance
measurement system
using DEA modelling. Industrial Management & Data Systems,
107(3), p. 361-381.
Wong, W.P. & Wong, K.Y. (2008). A review on benchmarking
of supply chain
performance measures. Benchmarking: An International Journal,
15(1), p. 25-51.
Xu, J. (2008). A Six-Sigma Based Methodology for Performance
Measurement of
Supply Chain, Proceedings of the 4th International Conference
on Wireless
Communications. Networking and Mobile Computing.
Reproduced with permission of copyright owner. Further
reproduction
prohibited without permission.
54. Module 1 Discussion
Discussion: Leadership and Social Justice
Refer to the reading Critical Evaluation of Education Reform
by Waters (2010).
· What role do you feel social justice plays in U.S. educational
reform efforts?
· Will social justice play a role in the decisions you make as an
educational leader?
(My concentration is PK-12 Education)