Here are the names of the personal protective equipment shown in the pictures: 1. Safety Goggles 2. Face Shield 3. Hard Hat 4. Ear Plugs 5. Respirator 6. Gloves 7. Safety Shoes 8. Coveralls 9. Apron 10. Dust Mask

2. DIRECTIONS: IDENTIFY THE FOLLOWING SENTENCES AND WRITE THE CORRECT ANSWER THAT
WILL MAKE THE SENTENCES COMPLETE BY SELECTING THE RIGHT WORD GIVEN IN THE BOX.
1. What executive order governs the Establishment of an Occupational Safety and Health Center in the
Employees’ Compensation Commission?
2. It is a cross-disciplinary area concerned with protecting the safety, health and welfare of people
engaged in work.
3. It is a situation that poses a level of threat to life, health, property, or environment.
4. They are the workers, companies, public or private offices, trade unions and workers’ organizations or
any organizations/communities requesting for or requiring technical assistance from the OSHC.
5. This refers to the office, premises or worksite where a worker is temporary or habitually assigned.
6. He/She refers to any member of the labor force, whether employed or unemployed, wage or non-wage.
7. The goal of all occupational safety and health programs is to foster a __________.
8. It is a type of hazard wherein an organism that is foreign (in presence or concentration) to the
organism being affected.
9. It is a physical factor within the environment that harms the musculoskeletal system.
10.It is defined as the probability that exposure to a hazard will lead to a negative consequence.
Worker Executive Order No. 307 Client
Risk Workplace
Biological Technical Assistance and Advice
Orgonomic Hazard
Occupational Health and Safety

4. PHILIPPINE
OCCUPATIONAL
HEALTH AND
SAFETY
STANDARDS
• Occupational Safety and Health is a cross-
disciplinary area concerned with protecting the safety,
health and welfare of people engaged in work. The goal
of all occupational safety and health programs is to
foster a safe work environment. As a secondary effect, it
may also protect co-workers, family members,
employers, customers, suppliers, nearby communities,
and other members of the public who are impacted by
the workplace environment. It may involve interactions
among many subject areas, including medicine,
occupational well-being, public health, safety
engineering / industrial engineering, chemistry, health
physics and others.
• The Occupation Safety and Health Center in the
country is established by Executive order No. 307. The
implementing rules and regulations are issued by the
Employees Compensation Commission (ECC).

5. • These Implementing Rules and Regulations are issued pursuant to
the authority of the Employees Compensation Commission (ECC)
under Section 8 of Executive Order No. 307 establishing the
Occupational Safety and Health Center (OSHC).
• The main objectives of the OSC are follows:
• prevent, eliminate or reduce work-related injuries, illnesses
and deaths
• implement effectively occupational health and safety
programs that will promote the health, efficiency and general
well-being of the Filipino workers through the improvement of
the quality of his working life that will enhance significantly
the productivity of industries and business
• maintain an expert intelligence and training center for
industrial disease and occupational safety
PHILIPPINE OCCUPATIONAL
HEALTH AND SAFETY
STANDARDS

6. PHILIPPINE OCCUPATIONAL
HEALTH AND SAFETY STANDARDS
• Coverage of Services
The Services of the Occupational Safety and Health Center (OSHC) covers the
preventive (primary, secondary, tertiary prevention) aspects of occupational safety and
health in every workplace, public or private.
The Center serves as the authority on Occupational Safety and Health in the areas of
research, training, and information dissemination and technical services.
The Center undertakes studies and research in all aspect of occupational safety and
health. It focuses and studies:
 To prevent and reduce occupational and work-related injuries and illnesses;
 To continuously review and support the updating of the list of occupational
illnesses as prescribed in PD 626, Employees’ Compensation and State Insurance
Fund; and
 To aid standard setting and enforcement of OSH Standards.

7. HAZARDS AND RISKS AND ITS
EFFECTS
• A hazard is a situation that poses a level of threat to life, health, property, or environment.
Most hazards are dormant or potential, with only a theoretical risk of harm. However, once a
hazard becomes "active", it can create an emergency situation. A hazard does not exist when
it is not happening. A hazardous situation that has come to pass is called an incident.
Hazard and vulnerability interact together to create risk.
• Hazards are sometimes classified into three modes:
• Dormant - The situation has the potential to be hazardous, but no people, property,
or environment is currently affected by this. For instance, a hillside may be unstable,
with the potential for a landslide, but there is nothing below or on the hillside that
could be affected.
• Armed - People, property, or environment are in potential harm's way.
• Active - A harmful incident involving the hazard has actually occurred. Often this is
referred to not as an "active hazard" but as an accident, emergency, incident, or
disaster.

8. HAZARDS AND RISKS AND ITS EFFECTS
TYPES OF HAZARDS
1. Biological
A biological hazard is one originating from an organism that is foreign (in presence or concentration) to
the organism being affected. Many biological hazards are associated with food, including certain viruses,
parasites, fungi, bacteria, and plant and seafood toxins. Pathogenic Campylobacter and Salmonella are
common food borne biological hazards. The hazards from these bacteria can be avoided through risk
mitigation steps such as proper handling, storing, and cooking of food. Disease in humans can come
from biological hazards in the form of infection by bacteria, viruses, or parasites.
2. Chemical
A chemical can be considered a hazard if by virtue of its intrinsic properties can cause harm or danger to
humans, property, or the environment. Some chemicals occur naturally in certain geological formations,
such as radon gas or arsenic. Other chemicals include products with commercial uses, such as
agricultural and industrial chemicals, as well as products developed for home use. Pesticides, which are
normally used to control unwanted insects and plants, may cause a variety of negative effects on non-
target organisms.
3. Mechanical
A mechanical hazard is any hazard involving a machine or process. Motor vehicles, aircraft, and air bags
pose mechanical hazards. Compressed gases or liquids can also be considered a mechanical hazard.

9. HAZARDS AND RISKS AND ITS EFFECTS
TYPES OF HAZARDS
4. Physical
A physical hazard is a naturally occurring process that has the potential to create loss or damage. Physical
hazards include, but are not limited to, earthquakes, floods, and tornadoes. Physical hazards often have
both human and natural elements. Flood problems can be affected by climate fluctuations and storm
frequency, both natural elements, and by land drainage and building in a flood plain, human elements.
Another physical hazard, X-rays, are naturally occurring from solar radiation, but have been utilized by
humans for medical purposes; however, overexposure can lead to cancer, skin burns, and tissue damage.
5. Ergonomic
It is a physical factor within the environment that harms the musculoskeletal system. Ergonomic hazards
include uncomfortable workstation height and poor body positioning. Ergonomic hazards are caused by
poorly designed workplaces or processes. Examples are poor lighting, or a job that requires you to repeat
the same movement over and over. An office receptionist that has to type an abundant amount of
documents may be affected by ergonomic hazards. If she/he is not seated they will have back pain, neck
pain, bad eye sight and leg cramps.
One of the most basic health practices in any workplace is having it free from common workplace
hazard. Workplace hazards vary from one working environment to another. Because there are so many
types of hazards, the three that will be discussed are mechanical hazards, biological hazards, and
chemical hazards.

10. HAZARDS AND RISKS AND ITS EFFECTS
Effect of Hazards in Workplace
1. Mechanical Hazards
• The severity of the injury depends on mostly how the accident happens
like slips, falls and entanglement. It is the responsibility of the company
to make sure all risks are minimized.
2. Chemical Hazards
• Everywhere around us see chemical and mixture of chemicals. Some
chemicals are acidic while some are extremely volatile. The workplace
health risks involved any particular chemical is hard to determine
without first knowing what exactly the chemical is and what
environment it is in.
3. Biological Hazards
• Viruses, diseases and other forms of sickness and biological hazards are
the hardest to manage when it comes to the workplace. The most
common areas of transmitting disease are in public areas and at work
so workplace health is seriously threatened by biological hazards. One
more reason why biological hazards are hard to manage is their ability
to travel from place to place.

11. • Hazard vs. Risk
The terms hazard and risk are often used
interchangeably, however, in terms of risk
assessment, these are two very distinct
terms. As defined above, a hazard is any
biological, chemical, mechanical, or physical
agent that is reasonably likely to cause harm
or damage to humans or the environment
with sufficient exposure or dose. Risk is
defined as the probability that exposure to a
hazard will lead to a negative consequence,
or more simply, Risk = Hazard x Dose
(Exposure).
HAZARDS AND
RISKS AND ITS
EFFECTS

12. 1. A hazard is a condition that poses a level of threat to life, health, property, or environment.
2. The situation has the potential to be hazardous, but no people, property, or environment is currently
affected by this is categorized active hazard.
3. For every company, all job descriptions must have occupational hazards.
4. Accident prone areas should have signs that warn people.
5. Risk is defined as the probability that exposure to a hazard will lead to a positive consequence.
6. All chemicals are hazardous to man.
7. Ergonomics hazards include earthquakes, floods, and tornadoes.
8. Ergonomics is a physical factor within the environment that harms the musculoskeletal system.
9. Compressed gases or liquids can also be considered a mechanical hazard.
10. Pesticides are normally used to control unwanted insects and plants may cause a variety of negative
effects on non-target organisms.
11.A hazardous situation that has come to pass is called an accident.
12.Regular medical checkups that will monitor the employees’ health can also prevent the transfer of
diseases between employees.
13.A biological hazard is one originating from an organ that is foreign to the organism being affected.
14.Motor vehicles, aircraft, and air bags pose mechanical hazards.
15.Removing occupational hazards is only one way of improving worker protection.
Directions: Tell whether the following sentences are true
or false.

13. Directions: Classify and describe the following pictures as to the types of
hazard – Biological, Chemical, Mechanical, Physical or Ergonomic.
1 5 9 13
2 6 10 14
3 7 11 15
4 8 12 16

14. Directions: Identify the following sentences by choosing correct word
provided in the box.
1. It is a constitutional law designed to make sure that all Filipinos have safe air to breathe.
2. It is otherwise known as the Philippine Clean Air Act.
3. These are precautions that are taken to prevent or reduce the likelihood of fire that may result in death, injury or
damage of property.
4. This is the collection, transport, processing recycling, or disposal of waste materials.
5. It aims to reduce, or avoid the potential losses from hazards, assure prompt and appropriate assistance to
victims of disaster, and achieve rapid and effective recovery.
6. This is a written emergency procedures plan which describes what actions must be taken to minimize hazards.
7. It refers to various measures taken to prevent contagious diseases from being spread from a patient to other
patients, health care workers, and visitors, or from others to a particular patient.
8. This process is the reduction or removal of chemical agents.
9. This plan is used to describe the need to remove all participants from the safe grad area and the hotel due to a
fire alarm (real or false) or other reason.
10.A kind of isolation that is used for diseases that are spread through particles that are exhaled.
Decontamination RA 8749 Disaster Management
Contingency Plan Evacuation Respiratory Isolation
Isolation Clean Air Act Fire Safety
Waste Management

15. Directions: Identify the following Personal Protective Equipment by
writing its name on your paper.
1 2 3 4 5
6 7 8 9 10