This document provides a short introduction to additive manufacturing (AM) technology, also known as 3D printing. It begins with definitions of AM and discusses its history from the invention of stereolithography in the 1980s. The document then covers the main AM processes like stereolithography, powder bed fusion, and material jetting. It also outlines advantages like design complexity, speed, and customization as well as disadvantages such as accuracy limitations and intellectual property issues. Application examples are given for industries like aerospace, healthcare, and consumer products. In conclusion, AM allows complex designs that improve performance for reduced costs.
This document provides an introduction to additive manufacturing (AM) technologies. It defines AM as "joining materials to make objects from 3D model data, usually layer upon layer." The document discusses the history and evolution of terms used for AM such as rapid prototyping. It also summarizes key AM processes like stereolithography and powder bed fusion. Advantages of AM include design complexity, speed, and weight reduction. Disadvantages include accuracy limitations and challenges with support material removal. The document outlines applications of AM across many industries.
The document provides an introduction to additive manufacturing (AM) technology. It defines AM as "a process of joining materials to make objects from 3D model data, usually layer upon layer." The document discusses the history and various applications of AM across industries like automotive, aerospace, and medical. It also outlines advantages like design complexity and customization enabled by AM. Challenges include limitations of materials and size of printable objects. Overall, the document gives a high-level overview of what AM is and its potential impact on various industries.
Additive manufacturing 3D Printing technologySTAY CURIOUS
Additive manufacturing 3D Printing
3D printing is the process of building an object one thin layer at a time. It is fundamentally additive rather than subtractive in nature. To many, 3D printing is the singular production of often-ornate objects on a desktop printer.
The document discusses additive manufacturing (AM) techniques for thermoplastics. It describes fused deposition modeling (FDM) as the most commonly used AM process, where a plastic filament is heated and extruded through a nozzle to build 3D objects layer by layer. Common thermoplastics used in FDM include ABS, PLA, and nylon. The document outlines applications of FDM like rapid prototyping, manufacturing tools, and customized medical and consumer products. It concludes by discussing the company's vision to support 3D printing innovation in India through testing and collaboration with research organizations.
The document discusses additive manufacturing (AM) techniques for thermoplastics. It describes fused deposition modeling (FDM) as the most commonly used AM process, where a plastic filament is extruded through a heated nozzle to build 3D objects layer by layer. Common thermoplastics used in FDM include ABS, PLA, and nylon. The document outlines applications of FDM such as rapid prototyping, manufacturing tools, small series production, and customized medical devices. It concludes by outlining the company's vision to support 3D printing innovation in India through testing and collaboration with research organizations.
The 3D printing process builds a three-dimensional object from a computer-aided design model, usually by successively adding material layer by layer, which is why it is also called additive manufacturing,
This document provides an introduction and overview of additive manufacturing (AM). It defines AM as a process of joining materials to make 3D objects layer by layer, and describes some key aspects including input, methods, materials, and applications. The document discusses how AM has advanced rapidly in recent decades, providing advantages like the ability to directly produce complex parts in a relatively short time without tools or molds. Historical developments are outlined, showing how AM technologies have evolved from early systems in the 1980s to many commercial options today.
The document provides an introduction to additive manufacturing (AM) including definitions, principles, types of prototypes, advantages, and commonly used terms. It discusses how AM works by building 3D objects layer by layer from a digital file. Key points covered include the 7 main AM processes classified by ISO/ASTM, the history and development of stereolithography, and benefits of AM for designers, engineers, and manufacturing.
This document provides an introduction to additive manufacturing (AM) technologies. It defines AM as "joining materials to make objects from 3D model data, usually layer upon layer." The document discusses the history and evolution of terms used for AM such as rapid prototyping. It also summarizes key AM processes like stereolithography and powder bed fusion. Advantages of AM include design complexity, speed, and weight reduction. Disadvantages include accuracy limitations and challenges with support material removal. The document outlines applications of AM across many industries.
The document provides an introduction to additive manufacturing (AM) technology. It defines AM as "a process of joining materials to make objects from 3D model data, usually layer upon layer." The document discusses the history and various applications of AM across industries like automotive, aerospace, and medical. It also outlines advantages like design complexity and customization enabled by AM. Challenges include limitations of materials and size of printable objects. Overall, the document gives a high-level overview of what AM is and its potential impact on various industries.
Additive manufacturing 3D Printing technologySTAY CURIOUS
Additive manufacturing 3D Printing
3D printing is the process of building an object one thin layer at a time. It is fundamentally additive rather than subtractive in nature. To many, 3D printing is the singular production of often-ornate objects on a desktop printer.
The document discusses additive manufacturing (AM) techniques for thermoplastics. It describes fused deposition modeling (FDM) as the most commonly used AM process, where a plastic filament is heated and extruded through a nozzle to build 3D objects layer by layer. Common thermoplastics used in FDM include ABS, PLA, and nylon. The document outlines applications of FDM like rapid prototyping, manufacturing tools, and customized medical and consumer products. It concludes by discussing the company's vision to support 3D printing innovation in India through testing and collaboration with research organizations.
The document discusses additive manufacturing (AM) techniques for thermoplastics. It describes fused deposition modeling (FDM) as the most commonly used AM process, where a plastic filament is extruded through a heated nozzle to build 3D objects layer by layer. Common thermoplastics used in FDM include ABS, PLA, and nylon. The document outlines applications of FDM such as rapid prototyping, manufacturing tools, small series production, and customized medical devices. It concludes by outlining the company's vision to support 3D printing innovation in India through testing and collaboration with research organizations.
The 3D printing process builds a three-dimensional object from a computer-aided design model, usually by successively adding material layer by layer, which is why it is also called additive manufacturing,
This document provides an introduction and overview of additive manufacturing (AM). It defines AM as a process of joining materials to make 3D objects layer by layer, and describes some key aspects including input, methods, materials, and applications. The document discusses how AM has advanced rapidly in recent decades, providing advantages like the ability to directly produce complex parts in a relatively short time without tools or molds. Historical developments are outlined, showing how AM technologies have evolved from early systems in the 1980s to many commercial options today.
The document provides an introduction to additive manufacturing (AM) including definitions, principles, types of prototypes, advantages, and commonly used terms. It discusses how AM works by building 3D objects layer by layer from a digital file. Key points covered include the 7 main AM processes classified by ISO/ASTM, the history and development of stereolithography, and benefits of AM for designers, engineers, and manufacturing.
The document provides an introduction to additive manufacturing (AM) including definitions, principles, types of prototypes, advantages, and commonly used terms. It discusses how AM works by building 3D objects layer by layer from a digital file. Key points covered include the 7 main AM processes classified by ISO/ASTM, the history and development of stereolithography, and benefits of AM for designers, engineers, and manufacturing.
3D Printing Technology PPT by ajaysingh_02AjaySingh1901
This PPT make on 3D printing Technology or additive manufacturing in which we cover the need, history importants, future scope, trend before the 3DP, advantage and disadvantage, limitations, application of 3DP
Additive manufacturing (3D printing) has matured and is being adopted beyond prototyping. As technologies improve and costs decrease, 3D printing allows for greater design flexibility, reduced lead times, and customized products. While prototyping remains common, other growing uses include product development, innovation, and efficiency gains. Wider adoption faces challenges around file formats, production volumes, and the need for more engineers experienced in 3D printing design.
This document provides an overview of 3D printing technology. It discusses how 3D printing works by laying down successive layers of material to create three dimensional objects from digital files. The document outlines several 3D printing methods like selective laser sintering, stereolithography, and fused deposition modeling. It also discusses the history of 3D printing and provides examples of current applications in fields like product development, medicine, architecture, and art. The document concludes by suggesting 3D printing will significantly reduce product development times and costs while its full impacts on business and society are still unknown.
IRJET- Analysis and Review of Rapid Prototyping Technology, & Study of Materi...IRJET Journal
This document discusses 3D printing technology and materials used in the 3D printing process. It begins with an introduction to rapid prototyping and additive manufacturing technologies. It then provides details on the general principles and processes involved, including CAD modeling, file conversion, printing, post-processing, and different 3D printing methods like vat photopolymerization, powder bed fusion, fused deposition modeling, and others. Finally, it discusses materials that can be used for 3D printing, including metals, polymers, and their combinations. The goal is to provide an overview of 3D printing technologies and materials to help guide selection for different applications.
Rapid prototyping techniques allow for the quick creation of physical models and prototypes. The main techniques discussed are stereo lithography (SLA), laminated object manufacturing (LOM), selective laser sintering (SLS), fused deposition modeling (FDM), and solid ground curing. FDM works by extruding plastic or metal through a heated nozzle to build layers. Rapid prototyping provides benefits like decreased development time and costs from minimizing mistakes. However, it may overlook important steps and lead to endless revisions if not used carefully. Future developments could allow metal prototypes at higher accuracy and change manufacturing by enabling more end-user production.
Graphene-based 3D printed circuit boardIRJET Journal
This document discusses using graphene to create 3D printed circuit boards via additive manufacturing. It begins with background on additive manufacturing and how it differs from traditional manufacturing methods. The authors propose using graphene ink for 3D printing due to graphene's high electrical conductivity and strength. The objectives are to extract graphene, create a homogeneous graphene ink, and develop an attachment for existing 3D printers to enable graphene-based 3D printing. The document reviews the evolution of additive manufacturing technologies and materials.
The document provides an overview of 3D printing including its history, working principles, types of printing processes, and conclusions about its use. It discusses how 3D printing has gained importance in manufacturing over the past decade as an additive process. The working principle involves forming a 3D model, printing the model layer-by-layer, and finishing the model. Different printing types are described like stereolithography, laminated object manufacturing, and fused deposition modeling. In conclusion, 3D printing is positioned to become more widely used for prototyping and production, though challenges around quality and intellectual property protection remain.
Rapid prototyping (RP) has emerged as a key enabling technology that can shorten product design and development time. This article discusses the role of RP in 'time compression' engineering and provides a brief description of three RP processes: stereolithography, selective laser sintering, and fused deposition modelling. The article also outlines different applications of RP technology in areas like functional models, patterns for investment casting, and medical/surgical models. Finally, it discusses future developments needed to further advance this field.
This document discusses rapid prototyping and provides details on various rapid prototyping techniques. It begins by defining what a prototype is and explaining the development of rapid prototyping from manual methods to soft and then rapid prototyping using additive manufacturing. Specific rapid prototyping techniques covered include stereolithography (SLA), selective laser sintering (SLS), laminated object manufacturing (LOM), and fused deposition modeling (FDM). Applications of rapid prototyping include design, engineering analysis, and tooling. Advantages are listed as fast, accurate production with minimal material waste, while limitations include staircase effects and cost.
This document summarizes a seminar on additive manufacturing technologies. It discusses the history of 3D printing, which was developed in 1984. It then describes several common additive manufacturing techniques like selective laser sintering, fused deposition modeling, and stereolithography. Applications of 3D printing discussed include uses in architecture, automotive, medical, food, and aerospace. The document outlines advantages like reduced costs and complex geometries along with disadvantages like high machine costs and size limitations. It concludes by noting the growing scope of additive manufacturing.
This document discusses 3D printing and its history and applications. 3D printing creates physical models from digital data layer by layer and was first introduced in 1982. It allows for lower prototyping costs and more design iterations compared to traditional manufacturing. Common 3D printing techniques mentioned include stereo lithography, fused deposition modeling, and selective laser sintering. The document outlines the 3D printing process and applications in fields such as defense, medicine, and manufacturing.
Rapid prototyping allows engineers to create physical models using 3D CAD data and layer-by-layer construction. The process involves designing a part in CAD software, converting it to an STL file, slicing the digital model into layers, and building a physical prototype one layer at a time. Rapid prototyping reduces costs and development time by finding design issues earlier compared to traditional prototyping methods.
This document summarizes a presentation on 3D printing. It begins with an introduction and overview of the topics to be covered, which include the history of 3D printing, how the process works, applications, advantages and disadvantages, and the future of the technology. It then goes into more detail on the history, additive manufacturing processes like fused deposition modeling, the basic steps of 3D printing, current and potential applications across different industries, benefits and limitations, and promising areas of future growth and development for 3D printing.
The document summarizes additive manufacturing (AM) techniques. It discusses the history of AM, which began in 1984 with the development of stereolithography. It then describes common AM processes like fused deposition modeling, selective laser sintering, laminated object manufacturing and stereolithography. Advantages of AM include reduced costs, ability to create complex geometries, and on-location manufacturing. Disadvantages include high machine costs and slow print speeds. Applications discussed include use in the medical, automotive, and construction industries. The scope of AM is growing with the creation of the first 3D printed car and plans for 3D printed buildings.
This document provides information about 3D printing from the National Institute of Technology in Hamirpur, India. It defines 3D printing as a process that creates physical objects by depositing material layer by layer based on a digital model. The document then discusses the history and development of 3D printing, including the first commercial 3D printer in 1987, and covers various 3D printing technologies, materials, applications and benefits and limitations.
It is a group of technologies that build 3D objects by adding layer-upon-layer of materials where the material may be plastic, metal, concrete even in future it may be human tissues also.
By group of technologies we mean 3D Printing, Rapid Prototyping (RP), Direct Digital Manufacturing (DDM), layered manufacturing and additive fabrication here.
This is a presentation I made for the Pacific Design and Manufacturing conference in February, 2014. There were three presentations and this was the first one. It takes a look at some of the new materials in 3D Printing.
The document provides an introduction to additive manufacturing (AM) including definitions, principles, types of prototypes, advantages, and commonly used terms. It discusses how AM works by building 3D objects layer by layer from a digital file. Key points covered include the 7 main AM processes classified by ISO/ASTM, the history and development of stereolithography, and benefits of AM for designers, engineers, and manufacturing.
3D Printing Technology PPT by ajaysingh_02AjaySingh1901
This PPT make on 3D printing Technology or additive manufacturing in which we cover the need, history importants, future scope, trend before the 3DP, advantage and disadvantage, limitations, application of 3DP
Additive manufacturing (3D printing) has matured and is being adopted beyond prototyping. As technologies improve and costs decrease, 3D printing allows for greater design flexibility, reduced lead times, and customized products. While prototyping remains common, other growing uses include product development, innovation, and efficiency gains. Wider adoption faces challenges around file formats, production volumes, and the need for more engineers experienced in 3D printing design.
This document provides an overview of 3D printing technology. It discusses how 3D printing works by laying down successive layers of material to create three dimensional objects from digital files. The document outlines several 3D printing methods like selective laser sintering, stereolithography, and fused deposition modeling. It also discusses the history of 3D printing and provides examples of current applications in fields like product development, medicine, architecture, and art. The document concludes by suggesting 3D printing will significantly reduce product development times and costs while its full impacts on business and society are still unknown.
IRJET- Analysis and Review of Rapid Prototyping Technology, & Study of Materi...IRJET Journal
This document discusses 3D printing technology and materials used in the 3D printing process. It begins with an introduction to rapid prototyping and additive manufacturing technologies. It then provides details on the general principles and processes involved, including CAD modeling, file conversion, printing, post-processing, and different 3D printing methods like vat photopolymerization, powder bed fusion, fused deposition modeling, and others. Finally, it discusses materials that can be used for 3D printing, including metals, polymers, and their combinations. The goal is to provide an overview of 3D printing technologies and materials to help guide selection for different applications.
Rapid prototyping techniques allow for the quick creation of physical models and prototypes. The main techniques discussed are stereo lithography (SLA), laminated object manufacturing (LOM), selective laser sintering (SLS), fused deposition modeling (FDM), and solid ground curing. FDM works by extruding plastic or metal through a heated nozzle to build layers. Rapid prototyping provides benefits like decreased development time and costs from minimizing mistakes. However, it may overlook important steps and lead to endless revisions if not used carefully. Future developments could allow metal prototypes at higher accuracy and change manufacturing by enabling more end-user production.
Graphene-based 3D printed circuit boardIRJET Journal
This document discusses using graphene to create 3D printed circuit boards via additive manufacturing. It begins with background on additive manufacturing and how it differs from traditional manufacturing methods. The authors propose using graphene ink for 3D printing due to graphene's high electrical conductivity and strength. The objectives are to extract graphene, create a homogeneous graphene ink, and develop an attachment for existing 3D printers to enable graphene-based 3D printing. The document reviews the evolution of additive manufacturing technologies and materials.
The document provides an overview of 3D printing including its history, working principles, types of printing processes, and conclusions about its use. It discusses how 3D printing has gained importance in manufacturing over the past decade as an additive process. The working principle involves forming a 3D model, printing the model layer-by-layer, and finishing the model. Different printing types are described like stereolithography, laminated object manufacturing, and fused deposition modeling. In conclusion, 3D printing is positioned to become more widely used for prototyping and production, though challenges around quality and intellectual property protection remain.
Rapid prototyping (RP) has emerged as a key enabling technology that can shorten product design and development time. This article discusses the role of RP in 'time compression' engineering and provides a brief description of three RP processes: stereolithography, selective laser sintering, and fused deposition modelling. The article also outlines different applications of RP technology in areas like functional models, patterns for investment casting, and medical/surgical models. Finally, it discusses future developments needed to further advance this field.
This document discusses rapid prototyping and provides details on various rapid prototyping techniques. It begins by defining what a prototype is and explaining the development of rapid prototyping from manual methods to soft and then rapid prototyping using additive manufacturing. Specific rapid prototyping techniques covered include stereolithography (SLA), selective laser sintering (SLS), laminated object manufacturing (LOM), and fused deposition modeling (FDM). Applications of rapid prototyping include design, engineering analysis, and tooling. Advantages are listed as fast, accurate production with minimal material waste, while limitations include staircase effects and cost.
This document summarizes a seminar on additive manufacturing technologies. It discusses the history of 3D printing, which was developed in 1984. It then describes several common additive manufacturing techniques like selective laser sintering, fused deposition modeling, and stereolithography. Applications of 3D printing discussed include uses in architecture, automotive, medical, food, and aerospace. The document outlines advantages like reduced costs and complex geometries along with disadvantages like high machine costs and size limitations. It concludes by noting the growing scope of additive manufacturing.
This document discusses 3D printing and its history and applications. 3D printing creates physical models from digital data layer by layer and was first introduced in 1982. It allows for lower prototyping costs and more design iterations compared to traditional manufacturing. Common 3D printing techniques mentioned include stereo lithography, fused deposition modeling, and selective laser sintering. The document outlines the 3D printing process and applications in fields such as defense, medicine, and manufacturing.
Rapid prototyping allows engineers to create physical models using 3D CAD data and layer-by-layer construction. The process involves designing a part in CAD software, converting it to an STL file, slicing the digital model into layers, and building a physical prototype one layer at a time. Rapid prototyping reduces costs and development time by finding design issues earlier compared to traditional prototyping methods.
This document summarizes a presentation on 3D printing. It begins with an introduction and overview of the topics to be covered, which include the history of 3D printing, how the process works, applications, advantages and disadvantages, and the future of the technology. It then goes into more detail on the history, additive manufacturing processes like fused deposition modeling, the basic steps of 3D printing, current and potential applications across different industries, benefits and limitations, and promising areas of future growth and development for 3D printing.
The document summarizes additive manufacturing (AM) techniques. It discusses the history of AM, which began in 1984 with the development of stereolithography. It then describes common AM processes like fused deposition modeling, selective laser sintering, laminated object manufacturing and stereolithography. Advantages of AM include reduced costs, ability to create complex geometries, and on-location manufacturing. Disadvantages include high machine costs and slow print speeds. Applications discussed include use in the medical, automotive, and construction industries. The scope of AM is growing with the creation of the first 3D printed car and plans for 3D printed buildings.
This document provides information about 3D printing from the National Institute of Technology in Hamirpur, India. It defines 3D printing as a process that creates physical objects by depositing material layer by layer based on a digital model. The document then discusses the history and development of 3D printing, including the first commercial 3D printer in 1987, and covers various 3D printing technologies, materials, applications and benefits and limitations.
It is a group of technologies that build 3D objects by adding layer-upon-layer of materials where the material may be plastic, metal, concrete even in future it may be human tissues also.
By group of technologies we mean 3D Printing, Rapid Prototyping (RP), Direct Digital Manufacturing (DDM), layered manufacturing and additive fabrication here.
This is a presentation I made for the Pacific Design and Manufacturing conference in February, 2014. There were three presentations and this was the first one. It takes a look at some of the new materials in 3D Printing.
Similar to 04_Sahner_AdditiveManufacturing_27032015.pptx (20)
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...IJECEIAES
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Rainfall intensity duration frequency curve statistical analysis and modeling...bijceesjournal
Using data from 41 years in Patna’ India’ the study’s goal is to analyze the trends of how often it rains on a weekly, seasonal, and annual basis (1981−2020). First, utilizing the intensity-duration-frequency (IDF) curve and the relationship by statistically analyzing rainfall’ the historical rainfall data set for Patna’ India’ during a 41 year period (1981−2020), was evaluated for its quality. Changes in the hydrologic cycle as a result of increased greenhouse gas emissions are expected to induce variations in the intensity, length, and frequency of precipitation events. One strategy to lessen vulnerability is to quantify probable changes and adapt to them. Techniques such as log-normal, normal, and Gumbel are used (EV-I). Distributions were created with durations of 1, 2, 3, 6, and 24 h and return times of 2, 5, 10, 25, and 100 years. There were also mathematical correlations discovered between rainfall and recurrence interval.
Findings: Based on findings, the Gumbel approach produced the highest intensity values, whereas the other approaches produced values that were close to each other. The data indicates that 461.9 mm of rain fell during the monsoon season’s 301st week. However, it was found that the 29th week had the greatest average rainfall, 92.6 mm. With 952.6 mm on average, the monsoon season saw the highest rainfall. Calculations revealed that the yearly rainfall averaged 1171.1 mm. Using Weibull’s method, the study was subsequently expanded to examine rainfall distribution at different recurrence intervals of 2, 5, 10, and 25 years. Rainfall and recurrence interval mathematical correlations were also developed. Further regression analysis revealed that short wave irrigation, wind direction, wind speed, pressure, relative humidity, and temperature all had a substantial influence on rainfall.
Originality and value: The results of the rainfall IDF curves can provide useful information to policymakers in making appropriate decisions in managing and minimizing floods in the study area.
Software Engineering and Project Management - Introduction, Modeling Concepts...Prakhyath Rai
Introduction, Modeling Concepts and Class Modeling: What is Object orientation? What is OO development? OO Themes; Evidence for usefulness of OO development; OO modeling history. Modeling
as Design technique: Modeling, abstraction, The Three models. Class Modeling: Object and Class Concept, Link and associations concepts, Generalization and Inheritance, A sample class model, Navigation of class models, and UML diagrams
Building the Analysis Models: Requirement Analysis, Analysis Model Approaches, Data modeling Concepts, Object Oriented Analysis, Scenario-Based Modeling, Flow-Oriented Modeling, class Based Modeling, Creating a Behavioral Model.
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...IJECEIAES
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Software Engineering and Project Management - Software Testing + Agile Method...Prakhyath Rai
Software Testing: A Strategic Approach to Software Testing, Strategic Issues, Test Strategies for Conventional Software, Test Strategies for Object -Oriented Software, Validation Testing, System Testing, The Art of Debugging.
Agile Methodology: Before Agile – Waterfall, Agile Development.
Gas agency management system project report.pdfKamal Acharya
The project entitled "Gas Agency" is done to make the manual process easier by making it a computerized system for billing and maintaining stock. The Gas Agencies get the order request through phone calls or by personal from their customers and deliver the gas cylinders to their address based on their demand and previous delivery date. This process is made computerized and the customer's name, address and stock details are stored in a database. Based on this the billing for a customer is made simple and easier, since a customer order for gas can be accepted only after completing a certain period from the previous delivery. This can be calculated and billed easily through this. There are two types of delivery like domestic purpose use delivery and commercial purpose use delivery. The bill rate and capacity differs for both. This can be easily maintained and charged accordingly.
Build the Next Generation of Apps with the Einstein 1 Platform.
Rejoignez Philippe Ozil pour une session de workshops qui vous guidera à travers les détails de la plateforme Einstein 1, l'importance des données pour la création d'applications d'intelligence artificielle et les différents outils et technologies que Salesforce propose pour vous apporter tous les bénéfices de l'IA.
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
04_Sahner_AdditiveManufacturing_27032015.pptx
1. 1
Thomas Sahner EN/MME
Dipl. Ing Mechanics
Ing. Process Engineering
Eur. Ing. FEANI ( Federation of European Engineering associations )
Member of the:
Metal Powder Industries Federation (MPIF)
Association of German engineers (VDI)
ORGANISATION EUROPÉENNE POUR LA RECHERCHE NUCLÉAIRE
CERNEUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH
2. EN-MME/ Th. Sahner 2
Additive Manufacturing
Short introduction to the technology
INTRODUCTION
3. EN-MME/ Th. Sahner 3
Additive Manufacturing
Short introduction to the technology
INTRODUCTION:
WHAT IS IT:
Additive Manufacturing by ASTM (American Society for
Testing and Materials ): “Process of joining materials to
make objects from 3D model data, usually layer upon layer,
as opposed to subtractive manufacturing methodologies,
such as traditional machining”
NAMING:
Rapid Prototyping: This term was used in the beginning of the professional use of the
technology because the main application was the manufacturing of prototypes, mock ups and
sample parts.
Todays most common terminologies are:
ADDITIVE MANUFACTURING (AM) or 3D PRINTING
“I GUESS THE TWO DEFINITIONS ARE VALID”
4. EN-MME/ Th. Sahner 4
Additive Manufacturing
Short introduction to the technology
INTRODUCTION:
But:
Additive Manufacturing (AM) concerns as well some other technologies
Powder Injection Moulding (PIM), comprising Metal Injection Moulding (MIM) and Ceramic Injection
Moulding (CIM), is an advanced manufacturing technology for the production of complex, high
volume net-shape components.
5. EN-MME/ Th. Sahner 5
Additive Manufacturing
Short introduction to the technology
INTRODUCTION:
But:
Additive Manufacturing (AM) concerns as well some other technologies
Powder sintering is the process of blending fine powdered materials, pressing them into a desired
shape or form (compacting), and then heating the compressed material in a controlled atmosphere
to bond the material (sintering). The powder metallurgy process generally consists of four basic
steps: powder manufacture, powder blending, compacting, and sintering. Compacting is generally
performed at room temperature, and the elevated-temperature process of sintering is usually
conducted at atmospheric pressure. Optional secondary processing often follows to obtain special
properties or enhanced precision.
6. EN-MME/ Th. Sahner 6
Additive Manufacturing
Short introduction to the technology
INTRODUCTION:
But:
Additive Manufacturing (AM) concerns as well some other technologies
Hybrid ( Additive and Subtractive manufacturing)
Laser Cladding Process with traditional machining
Laser Cladding Process description
In laser cladding, the laser beam is defocused on the workpiece with a selected spot size. The
powder coating material is carried by an inert gas through a powder nozzle into the melt pool. The
laser optics and powder nozzle are moved across the workpiece surface to deposit single tracks,
complete layers or even high-volume build-ups.
7. 1983 Charles Hull invents
Stereolithography (SLA) Charles ‘Chuck’
Hull was the first to develop a
technology for creating solid objects
from a CAD/CAM file, inventing the process he termed
‘stereolithography’ in 1983. SLA works by curing and
solidifying successive layers of liquid photopolymer resin
using an ultraviolet laser. The field that came to be known
variously as 'additive manufacturing', 'rapid prototyping'
and '3D printing' was born.
EN-MME/ Th. Sahner 7
Additive Manufacturing
Short introduction to the technology
History of 3D Printing:
The earliest 3D printing technologies first became visible in
the late 1980’s, at which time they were called Rapid
Prototyping (RP) technologies. This is because the processes
were originally conceived as a fast and more cost-effective
method for creating prototypes for product development
within industry.
1980-2000
2000-
8. EN-MME/ Th. Sahner 8
Additive Manufacturing
Short introduction to the technology
The AM value chain consists of five steps – AM system providers are active in most areas of the value chain
Material System Software
Application
design
Production
Mainly: Creation of
metal powder
> Powder with high
purity and a very
narrow distribution
of the granular size
(usually 30µm)
> Hard to get from
large providers due
to small orders
>Usually sold by
AM system
providers
Players:
> Höganäs
> TLS Technik
> San
> etc.
>Usually stand-
alone powder bed
fusion systems
> System providers
with low levels of
vertical integration,
standard
components
usually made by
contract
manufacturers
> Providers
integrate
components system
& software
Players:
> EOS
> SLM Solutions
> Concept Laser
> etc.
>Differentiation
between process
control and
enhancement
software
> Process control
from system prov.
> Add-on software
such as automatic
support generation,
design optimization
By specialized
companies
Players:
> Materialise
> netfabb
> With
> etc.
> Support for end
customers
> Can be complex
and demanding
> Done by system
providers, software
developers and/or
service providers
> Not every service
provider is able to
design applications
Players:
> 3T PRD
> Concept Laser
> EOS
> etc.
>Different produc-
tion scenarios:
- Large OEM
- Contract manu-
facturer/service
provider
- Specialized part
manufacturer
> Production is
normally not done
by AM System
providers
Players:
> 3T PRD
> Janke Engin.
> Layer Wise
> etc.
9. EN-MME/ Th. Sahner 9
Additive Manufacturing
Short introduction to the technology
President Obama announced his plan to invest $1 billion to catalyse a
national network of up to 15 manufacturing innovation institutes…
Pilot institute : National Additive Manufacturing Innovation Institute
(NAMII) with a budget of 30 M$ in 2013
“3D PRINTING’S POTENTIAL TO REVOLUTIONIZE
MANUFACTURING IS QUICKLY BECOMING A
REALITY.”
In the frame of the Horizon 2020 project many European and National
Networks are founded to see the potential of the technology.
10. EN-MME/ Th. Sahner 10
Additive Manufacturing
Short introduction to the technology
As of today, AM applications have been developed in various industries
AM Revenues per industry segment (2012)
CONSUMER PROD./
ELECTRONICS
AUTOMOTIVE MEDICAL/DENTAL
AEROSPACE TOOLS/MOLDS OTHER
370 [EUR m] 380 [EUR m]
320 [EUR m]
180 [EUR m] 230 [EUR m] 330 [EUR m]
Source: Wohlers Associates; Expert interviews; Roland Berger
11. EN-MME/ Th. Sahner 11
Additive Manufacturing
Short introduction to the technology
Advantages:
Design complexity and freedom:
The advent of 3D printing has seen a proliferation of products (designed in digital environments), which involve levels of complexity that
simply could not be produced physically in any other way. While this advantage has been taken up by designers and artists to impressive
visual effect, it has also made a significant impact on industrial applications, whereby applications are being developed to materialize
complex components that are proving to be both lighter and stronger than their predecessors.
Speed:
You can create complex parts within hours , with limited human resources. Only machine operator is needed for loading the data and the
powder material, start the process and finally for the finishing. During the manufacturing process no operator is needed.
Customisation
3D printing processes allow for mass customisation — the ability to personalize products according to individual needs and requirements.
Even within the same build chamber, the nature of 3D printing means that numerous products can be manufactured at the same time
according to the end-users requirements at no additional process cost.
Tool-less
For industrial manufacturing, one of the most cost-, time- and labour-intensive stages of the product development process is the production
of the tools. For low to medium volume applications, industrial 3D printing — or additive manufacturing — can eliminate the need for tool
production and, therefore, the costs, lead times and labour associated with it. This is an extremely attractive proposition, that an increasing
number or manufacturers are taking advantage of. Furthermore, because of the complexity advantages stated above, products and
components can be designed specifically to avoid assembly requirements with intricate geometry and complex features further eliminating
the labour and costs associated with assembly processes.
Extreme Lightweight design
AM enable weight reduction via topological optimization
12. EN-MME/ Th. Sahner 12
Additive Manufacturing
Short introduction to the technology
Advantages:
Sustainable / Environmentally Friendly
3D printing is also emerging as an energy-efficient technology that can provide environmental efficiencies in terms of both the
manufacturing process itself, utilising up to 90% of standard materials, and, therefore, creating less waste, but also throughout an additively
manufactured product’s operating life, by way of lighter and stronger design that imposes a reduced carbon footprint compared with
traditionally manufactured products.
No storage cost
Since 3D printers can “print” products as and when needed, and does not cost more than mass manufacturing, no expense on storage of
goods is required.
Increased employment opportunities
Widespread use of 3D printing technology will increase the demand for designers and technicians to operate 3D printers and create
blueprints for products.
13. EN-MME/ Th. Sahner 13
Additive Manufacturing
Short introduction to the technology
Disadvantages:
Questionable Accuracy
3D printing is primarily a prototyping technology, meaning that parts created via the technology are mainly test parts. As with any viable
test part, the dimensions have to be precise in order for engineers to get an accurate read on whether or not a part is feasible. While 3D
printers have made advances in accuracy in recent years, many of the plastic materials still come with an accuracy disclaimer. For
instance, many materials print to either +/- 0.1 mm in accuracy, meaning there is room for error.
Support material removal
When production volumes are small, the removal of support material is usually not a big issue. When the volumes are much higher, it
becomes an important consideration. Support material that is physically attached is of most concern.
Limitations of raw material
At present, 3D printers can work with approximately 100 different raw materials. This is insignificant when compared with the enormous
range of raw materials used in traditional manufacturing. More research is required to devise methods to enable 3D printed products to be
more durable and robust.
Considerable effort required for application design and for setting process parameters
Complex set of around 180 material, process and other parameters and specific design required to fully profit from the technology
Material cost:
Today, the cost of most materials for additive systems ( Powder ) is slightly greater than that of those used for traditional manufacturing .
Material properties:
A limited choice of materials is available. Actually, materials and there properties (e.g., tensile property, tensile strength, yield strength,
and fatigue) have not been fully characterized. Also, in terms of surface quality, even the best RM processes need perhaps secondary
machining and polishing to reach acceptable tolerance and surface finish.
14. EN-MME/ Th. Sahner 14
Additive Manufacturing
Short introduction to the technology
Disadvantages:
Intellectual property issues
The ease with which replicas can be created using 3D technology raises issues over intellectual property rights. The availability of
blueprints online free of cost may change with for-profit organizations wanting to generate profits from this new technology.
Limitations of size
3D printing technology is currently limited by size constraints. Very large objects are still not feasible when built using 3D printers.
Cost of printers
The cost of buying a 3D printer still does not make its purchase by the average householder feasible. Also, different 3D printers are
required in order to print different types of objects. Also, printers that can manufacture in color are costlier than those that print
monochrome objects.
Unchecked production of dangerous items
Liberator, the world’s first 3D printed functional gun, showed how easy it was to produce one’s own weapons, provided one had access to
the design and a 3D printer. Governments will need to devise ways and means to check this dangerous tendency.
15. EN-MME/ Th. Sahner 15
Additive Manufacturing
Short introduction to the technology
Rapid
Prototyping
Rapid
Manufacturing
Rapid
Tooling
Rapid
Spareing
PRODUCT LIVE CYCLE
Idea Death of
the part
Over the last years AM technology became valid for the hole lifecycle of a product
Production planning
Testing
Design
Concept
16. EN-MME/ Th. Sahner 16
Additive Manufacturing
Short introduction to the technology
Time Cost
Complexity
of the part
ADDITIVE MANUFACTURING
17. EN-MME/ Th. Sahner 17
Additive Manufacturing
Short introduction to the technology
“SEE THE DIFFERENCE IN THE CONCEPTION OF THE PART”
Conventionally designed and produced cast
steel nacelle hinge bracket for an Airbus A320
(top) and optimised titanium version of the
nacelle hinge bracket made by additive
manufacturing technology.
Commercial airplanes can have up to several
hundred seed belt buckles. A standard buckle
weight is around 155g in St. and 120g in Al.
With AM the weight was reduced to 68 g in Ti.
Saving over the lifetime of an A380:
Fuel: 3.300.000 l
CO2 emission: 0,74Mt
18. EN-MME/ Th. Sahner 18
Additive Manufacturing
Short introduction to the technology
Part manufacturing
- Advantage for sport shoe manufacturer is
the data exchange between development and
production over night. e.g. ADIDAS with
the development in Germany an the
production side in China.
Example for medical application
- 3D printing can be personalised
- Giving back life quality
19. EN-MME/ Th. Sahner 19
Additive Manufacturing
Short introduction to the technology
NASA has carried out parabolic flights that mimic
microgravity to test "additive manufacturing“
Many other applications for printing on-site
The assembly can be personalised
and printed in one process.
20. EN-MME/ Th. Sahner 20
Additive Manufacturing
Short introduction to the technology
The fast packaging solution, French postal
The part is scanned in the post office and a
cutter is cutting the different layer on site.
For her Spring/Summer 2015 collection, presented in Paris, Dutch
fashion designer Iris van Herpen unveiled 3D-printed garments and
accessories "grown" that explores the interplay of magnetic forces.
Her inspiration of this collection came after she visited CERN, and the
Large Hadron Collider
21. EN-MME/ Th. Sahner 21
Additive Manufacturing
Short introduction to the technology
Chocolate printer
Concrete Printer
Figure Print
22. EN-MME/ Th. Sahner 22
Additive Manufacturing
Short introduction to the technology
APPLICATION DESIGN
23. EN-MME/ Th. Sahner 23
Additive Manufacturing
Short introduction to the technology
CAD Model
Preparation
Build Process
Post Process
PART
CAD Design
CAD Translator
File
Verification
Orientation
Support
Parameters
Part Build
Cleaning
Support remove
Post curing
Material
Chemical
properties
Physical
properties
24. EN-MME/ Th. Sahner 24
Additive Manufacturing
Short introduction to the technology
Easy Cutting Path
Angled surfaces
25. EN-MME/ Th. Sahner 25
Additive Manufacturing
Short introduction to the technology
Supports
Holes
26. EN-MME/ Th. Sahner 26
Additive Manufacturing
Short introduction to the technology
Down Ward Facing Surfaces
27. EN-MME/ Th. Sahner 27
Additive Manufacturing
Short introduction to the technology
Increased Performance of a Hydraulic Actuator
Original design
Building
cavities
Redesign of supports and channels
With new channel shape
Optimized design
28. EN-MME/ Th. Sahner 28
Additive Manufacturing
Short introduction to the technology
PROCESSES
29. EN-MME/ Th. Sahner 29
Additive Manufacturing
Short introduction to the technology
Major AM processes based on Hopkinson and Dickens’ classification
AM Processes
Liquid Based
Powder Based
Solid Based
• Stereolithography
• Jetting Systems
• Direct Light Processing
• Selective Laser Sintering
• Three-Dimensional Printing
• Fused Metal Deposite Systems
• Electron Beam Melting
• Selective Laser Melting
• Selective Masking Sintering
• Selective Inhibition Sintering
• Electro photographic Layered
Manufacturing
• High Speed Sintering
• Fused Deposition Modelling
• Sheet Stacking Technologies
30. EN-MME/ Th. Sahner 30
Additive Manufacturing
Short introduction to the technology
Stereolithography (SL)
is widely recognized as the first 3D printing process;
it was certainly the first to be commercialised. SL is a
laser-based process that works with photopolymer
resins, that react with the laser and cure to form a
solid in a very precise way to produce very accurate
parts.
It is a complex process, but simply put, the photopolymer
resin is held in a vat with a movable platform inside. A laser beam is directed in the X-Y axes across the
surface of the resin according to the 3D data supplied to the machine (the .stl file), whereby the resin
hardens precisely where the laser hits the surface. Once the layer is completed, the platform within the vat
drops down by a fraction (in the Z axis) and the subsequent layer is traced out by the laser. This
continues until the entire object is completed and the platform can be raised out of the vat for removal.
Because of the nature of the SL process, it requires support structures for some parts, specifically those
with overhangs or undercuts. These structures need to be manually removed. In terms of other post
processing steps, many objects 3D printed using SL need to be cleaned and cured. Curing involves
subjecting the part to intense light in an oven-like machine to fully harden the resin. Stereolithography is
generally accepted as being one of the most accurate 3D printing processes with excellent surface finish.
However limiting factors include the post-processing steps required and the stability of the materials over
time, which can become more brittle.
31. EN-MME/ Th. Sahner 31
Additive Manufacturing
Short introduction to the technology
Digital Light Processing (DLP)
is a similar process to Stereolithography in that it is a 3D printing
process that works with photopolymers. The major difference is
the light source. DLP uses a more conventional light source, such
as an arc lamp, with a liquid crystal display panel or a deformable
mirror device (DMD), which is applied to the entire surface of the
vat of photopolymer resin in a single pass, generally making it faster
than SL.
Also like SL, DLP produces highly accurate parts with excellent resolution, but its similarities also
include the same requirements for support structures and post-curing. However, one advantage of DLP
over SL is that only a shallow vat of resin is required to facilitate the process, which generally results in
less waste and lower running costs.
32. EN-MME/ Th. Sahner 32
Additive Manufacturing
Short introduction to the technology
Laser sintering and laser melting (SL, SLM)
are interchangeable terms that refer to a laser based
3D Printing process that works with powdered
materials.
The laser is traced across a powder bed of tightly
Compacted powdered material, according to the
3D data fed to the machine, in the X-Y axes.
As the laser interacts with the surface of the
powdered material it sinters, or fuses, the particles
to each other forming a solid. As each layer is
completed the powder bed drops incrementally and a roller smoothes the powder over the surface of the
bed prior to the next pass of the laser for the subsequent layer to be formed and fused with the previous
layer.
The build chamber is completely sealed as it is necessary to maintain a precise temperature during the
process specific to the melting point of the powdered material of choice. Once finished, the entire
powder bed is removed from the machine and the excess powder can be removed to leave the ‘printed’
parts. One of the key advantages of this process is that the powder bed serves as an in-process support
structure for overhangs and undercuts, and therefore complex shapes that could not be manufactured in
any other way are possible with this process.
33. EN-MME/ Th. Sahner 33
Additive Manufacturing
Short introduction to the technology
Laser sintering and laser melting (SL, SLM)
However, on the downside, because of the high temperatures required for laser sintering, cooling times
can be considerable. Furthermore, porosity has been an historical issue with this process, and while
there have been significant improvements towards fully dense parts, some applications still necessitate
infiltration with another material to improve mechanical characteristics.
Laser sintering can process plastic and metal materials, although metal sintering does require a much
higher powered laser and higher in-process temperatures. Parts produced with this process are much
stronger than with SL or DLP, although generally the surface finish and accuracy is not as good.
34. Fused Deposition Modelling FDM & Freeform Fabrication FFF
3D printing utilizing the extrusion of thermoplastic material is
easily the most common — and recognizable — 3DP process.
The most popular name for the process is Fused Deposition
Modelling, due to its longevity, however this is a trade name,
registered by Stratasys, the company that originally developed it.
Stratasys’ FDM technology has been around since the early 1990’s
and today is an industrial grade 3D printing process. However,
the proliferation of entry-level 3D printers that have emerged since
2009 largely utilize a similar process, generally referred to as Freeform Fabrication, but in a more basic
form due to patents still held by Stratasys. The earliest RepRap machines and all subsequent evolutions
— open source and commercial employ extrusion methodology. However, following Stratasys’ patent
infringement filing against Afinia there is a question mark over how the entry-level end of the market
will develop now, with all of the machines potentially in Stratasys’ firing line for patent infringements.
The process works by melting plastic filament that is deposited, via a heated extruder, a layer at a time,
onto a build platform according to the 3D data supplied to the printer. Each layer hardens as it is
deposited and bonds to the previous layer.
EN-MME/ Th. Sahner 34
Additive Manufacturing
Short introduction to the technology
35. Fused Deposition Modelling FDM & Freeform Fabrication FFF
Stratasys has developed a range of proprietary industrial grade materials for its FDM process that are
suitable for some production applications. At the entry-level end of the market, materials are more
limited, but the range is growing. The most common materials for entry-level FFF 3D printers are ABS
and PLA.
The FDM/FFF processes require support structures for any applications with overhanging geometries.
For FDM, this entails a second, water-soluble material, which allows support structures to be relatively
easily washed away, once the print is complete.
Alternatively, breakaway support materials are also possible, which can be removed by manually
snapping them off the part.
Support structures, or lack thereof, have generally been a limitation of the entry level FFF 3D printers.
However, as the systems have evolved and improved to incorporate dual extrusion heads, it has
become less of an issue.
In terms of models produced, the FDM process from Stratasys is an accurate and reliable process that
is relatively office/studio- friendly, although extensive post-processing can be required. At the entry-
level, as would be expected, the FFF process produces much less accurate models, but things are
constantly improving.
The process can be slow for some part geometries and layer-to- layer adhesion can be a problem,
resulting in parts that are not watertight. Again, post-processing using Acetone can resolve these issues.
EN-MME/ Th. Sahner 35
Additive Manufacturing
Short introduction to the technology
36. EN-MME/ Th. Sahner 36
Additive Manufacturing
Short introduction to the technology
Laminated object manufacturing (LOM)
is a rapid prototyping system developed by Helisys Inc.
In it, layers of adhesive-coated paper, plastic, or metal
laminates are successively glued together and cut to shape
with a knife or laser cutter. Objects printed with this
technique may be additionally modified by machining or
drilling after printing.
Typical layer resolution for this process is defined by the
material feedstock and usually ranges in thickness from
one to a few sheets of copy paper.
37. EN-MME/ Th. Sahner 37
Additive Manufacturing
Short introduction to the technology
Binder Jetting
There are two 3D printing process that utilize a jetting technique.
Binder jetting: where the material being jetted is a binder,
and is selectively sprayed into a powder bed of the part material
to fuse it a layer at a time to create/print the required part.
As is the case with other powder bed systems, once a layer is
completed, the powder bed drops incrementally and a roller or
blade smoothes the powder over the surface of the bed, prior to
the next pass of the jet heads, with the binder for the subsequent layer to be formed and fused with the
previous layer.
Advantages of this process, like with SLS, include the fact that the
need for supports is negated because the powder bed itself provides this functionality. Furthermore, a
range of different materials can be used, including ceramics and food. A further distinctive advantage of
the process is the ability to easily add a full colour palette which can be added to the binder.
The parts resulting directly from the machine, however, are not as strong as with the sintering process
and require post-processing to ensure durability.
38. EN-MME/ Th. Sahner 38
Additive Manufacturing
Short introduction to the technology
Voxeljet
voxeljet is one of the leading manufacturers of industrial
3D printing systems and operates service centres in
Germany, USA and UK for the "on-demand production" of
molds and models for metal casting.
voxeljet SYSTEMS business division focuses on the
development, production and distribution of the fastest and
most powerful 3D printing systems in the market. Today,
voxeljet has a well-coordinated product range that reaches
from smaller entry models to large-format machines, and
therefore offers the perfect 3D print system for many
application areas.
39. EN-MME/ Th. Sahner 39
Additive Manufacturing
Short introduction to the technology
Tooling
3D printed tool inserts in polymer to print plastic
parts which can not printed directly with
3D printers (e.g. PP )
40. EN-MME/ Th. Sahner 40
Additive Manufacturing
Short introduction to the technology
MATERIALS
41. EN-MME/ Th. Sahner 41
Additive Manufacturing
Short introduction to the technology
AM Materials
However, there are now way too many proprietary materials from the many different 3D printer vendors
to cover them all here.
Instead, we will look at the most popular types of material in a more generic way. And also a couple of
materials that stand out.
Liquid Based Powder Based Solid Based
What do we have at CERN:
Today we are only able to manufacture some polymers
The planning is to get a metall machine in 2015 in our main workshop
42. EN-MME/ Th. Sahner 42
Additive Manufacturing
Short introduction to the technology
SLA® Viper si2 system
Acura Bluestone
43. EN-MME/ Th. Sahner 43
Additive Manufacturing
Short introduction to the technology
3D Printer
For simple models, the purpose is
in the rapid prototyping and 3D
Mock-ups.
The mechanical properties can be
improved by epoxy impregnation
Binder Jetting
44. EN-MME/ Th. Sahner 44
Additive Manufacturing
Short introduction to the technology
AM Materials
Nylon, or Polyamide, is commonly used in powder form with the sintering process or in filament form
with the FDM process. It is a strong, flexible and durable plastic material that has proved reliable for 3D
printing. It is naturally white in colour but it can be coloured — pre- or post printing. This material can
also be combined (in powder format) with powdered aluminium to produce another common 3D
printing material for sintering Alumide.
ABS is another common plastic used for 3D printing, and is widely used on the entry-level FDM 3D
printers in filament form. It is a particularly strong plastic and comes in a wide range of colours.
ABS can be bought in filament form from a number of non- propreitary sources, which is another reason
why it is so popular.
PLA is a bio-degradable plastic material that has gained traction with 3D printing for this very reason. It
can be utilized in resin format for DLP/SL processes as well as in filament form for the FDM process. It
is offered in a variety of colours, including transparent, which has proven to be a useful option for some
some applications of 3D printing. However it is not as durable oras flexible as ABS.
45. EN-MME/ Th. Sahner 45
Additive Manufacturing
Short introduction to the technology
AM Materials
LayWood is a specially developed 3D printing material for entry- level extrusion 3D printers. It comes
in filament form and is a wood/polymer composite (also referred to as WPC).
A growing number of metals and metal composites are used for industrial grade 3D printing. Two of the
most common are aluminium and cobalt derivatives.
One of the strongest and therefore most commonly used metals for 3D printing is Stainless Steel in
powder form for the sintering/ melting/EBM processes. It is naturally silver, but can be plated with other
materials to give a gold or bronze effect.
In the last couple of years Gold and Silver have been added to the range of metal materials that can be
3D printed directly, with obvious applications across the jewellery sector. These are both very strong
materials and are processed in powder form.
Titanium is one of the strongest possible metal materials and has been used for 3D printing industrial
applications for some time.
Supplied in powder form, it can be used for the sintering/melting/ EBM processes.
46. EN-MME/ Th. Sahner 46
Additive Manufacturing
Short introduction to the technology
AM Materials
Ceramics
Ceramics are a relatively new group of materials that can be used for 3D printing with various levels of
success. The particular thing to note with these materials is that, post printing, the ceramic parts need to
undergo the same processes as any ceramic part made using traditional methods of production - namely
firing and glazing.
Paper
Standard A4 copier paper is a 3D printing material employed by the proprietary SDL process supplied
by Mcor Technologies. The company operates a notably different business model to other 3D printing
vendors, whereby the capital outlay for the machine is in the mid-range, but the emphasis is very much
on an easily obtainable, cost-effective material supply, that can be bought locally. 3D printed models
made with paper are safe, environmentally friendly, easily recyclable and require no post-processing.
Bio Materials
There is a huge amount of research being conducted into the potential of 3D printing bio materials for a
host of medical (and other) applications. Living tissue is being investigated at a number of leading
institutions with a view to developing applications that include printing human organs for transplant, as
well as external tissues for replacement body parts. Other research in this area is focused on developing
food stuffs - meat being the prime example.
47. EN-MME/ Th. Sahner 47
Additive Manufacturing
Short introduction to the technology
AM Materials
Bio Materials
There is a huge amount of research being conducted into the potential of 3D printing bio materials for a
host of medical (and other) applications. Living tissue is being investigated at a number of leading
institutions with a view to developing applications that include printing human organs for transplant, as
well as external tissues for replacement body parts.
Food
Experiments with extruders for 3D printing food substances has increased dramatically over the last
couple of years. Chocolate is the most common (and desirable). There are also printers that work with
sugar and some experiments with pasta and meat. Looking to the future, research is being undertaken, to
utilize 3D printing technology to produce finely balanced whole meals.
Other
And finally, one company that does have a unique (proprietary) material offering is Stratasys, with its
digital materials for the Objet Connex 3D printing platform. This offering means that standard Objet 3D
printing materials can be combined during the printing process — in various and specified
concentrations to form new materials with the required properties. Up to 140 different Digital Materials
can be realized from combining the existing primary materials in different ways.
Concrete
48. EN-MME/ Th. Sahner 48
Additive Manufacturing
Short introduction to the technology
RIKS
49. EN-MME/ Th. Sahner 49
Additive Manufacturing
Short introduction to the technology
Safety features
Powder handling & changing - The following risks may be experienced while working with the systems:
Risk or damage to respiratory tract and lungs when handling metal powders and filter dust and suspected
carcinogenic effect of the metal powder and filter dust. It is strongly recommended to wear breathing protection
(respiratory mask; particle filter P2D or P3D) and NEVER inhale the dust when filling, emptying and cleaning the
build envelope (build module, dosing chamber, coater, powder overflow) and when emptying the collecting
container and filter cartridge of the extraction and filter unit.
Risk of eye damage when handling metal powder and filter dust. It is strongly recommended to wear eye
protection (close-fitting safety goggles) when filling, emptying and cleaning the build envelope (build module,
dosing chamber, coater, powder overflow) and when emptying the collecting container and filter cartridge of the
extraction and filter unit.
Risk of compressed air outlet. Compressed air can escape if compressed air lines and union joints are opened or
damaged. It is strongly recommended to wear safety gloves due to risk of skin damage. The toxic nickel in the metal
powder and filter dust can cause irreversible damage or a sensitisation through skin contact (allergic reaction).
Risk of suspected carcinogenic effect of the metal powder and filter dust. A longer period inhaling of powder dust
may cause accumulation of powder in lungs, blood and other organs which has a strong carcinogenic effect.
Laser system
The principal risks of the laser system are the following:
Laser is “invisible” (Class 1). This means that the human eye cannot detect the beam if it impacts the eye. It is
highly recommended to activate the laser only when the door is closed due to protective action of the door crystal.
Special precaution should be made with docking/undocking of the build chamber. The laser may impact with the
part and suffer severe damage.
50. EN-MME/ Th. Sahner 50
Additive Manufacturing
Short introduction to the technology
3D printers are energy hogs
When melting plastic with heat or lasers, 3D printers consume about 50 to 100 times more electrical energy than injection
molding to make an item of the same weight, according to research by Loughborough University. In 2009, research at
MIT's Environmentally Benign Manufacturing program showed that laser direct metal deposition (where metal powder is
fused together) used hundreds of times the electricity as traditional casting or machining. Because of this, 3D printers are
better for small batch runs. Industrial-sized 3D printers may not be the answer to lessening our use of coal power any
time soon.
Unhealthy air emissions
3D printers may pose a health risk when used in the home, according to researchers at the Illinois Institute of Technology.
The emissions from desktop 3D printers are similar to burning a cigarette or cooking on a gas or electric stove. The 2013
study was the first to measure these airborne particle emissions from desktop 3D printers. While heating the plastic and
printing small figures, the machines using PLA filament emitted 20 billion ultrafine particles per minute, and the ABS
emitted up to 200 billion particles per minute. These particles can settle in the lungs or the bloodstream and pose health
risk, especially for those with asthma.
Reliance on plastics
One of the biggest environmental movements in recent history has been to reduce reliance on plastics, from grocery bags
to water bottles to household objects that can be made from recycled materials instead. The most popular—and
cheapest—3D printers use plastic filament. Though using raw materials reduces the amount of waste in general, the
machines still leave unused or excess plastic in the print beds. PLA is biodegradable, but ABS filament is still the most
commonly used type of plastic. The plastic byproduct ends up in landfills. If 3D printing is going to be industrialized,
that byproduct or other recycled plastic needs to be reused.
51. EN-MME/ Th. Sahner 51
Additive Manufacturing
Short introduction to the technology
IP and licensing deals
In January, 3D Systems acquired Gentle Giant Ltd., which owned the licensing rights to toy franchises such as The
Hobbit, The Walking Dead, Harry Potter, Alien, and Star Wars. Gartner has said that companies may lose at least $100
billion in four years to licensing or IP owners. 3D printing will change the business market—and the black market for
these items—and the legislation will have to rush to catch up. This potential digital piracy situation is comparable to the
way the internet challenged the movie and music industries for copyrights, trademarks, and illegal downloads.
Gun control loopholes
The first successful 3D printed gun is old news, but its ramifications are very important. Companies are popping up
around the world, attempting to sell these guns and/or the CAD designs for them. Engineering firm Solid Concepts has
even fired rounds out of the first 3D printed metal gun. Congress' Undetectable Firearms Act, which bans guns that can't
be detected by metal detectors or x-ray scanners, was renewed for 10 years. It left a loophole in the law, however: 3D
printed guns with a tiny piece of metal aren't banned by the Act. Legislators are attempting to close that loophole now,
after Congress ignored the issue for quite some time, with special requirements for printed guns.
Responsibility of manufacturers
Weapons can be 3D printed. So can safety equipment such as helmets, wheels for bikes, and toys for small children. Of
course there is the issue of intellectual property and trademark, but the larger issue involves responsibility. If a person
shoots a gun and harms or kills someone, stabs someone with a 3D printed knife, or breaks their neck while riding on a
bike with a 3D printed helmet, who is held accountable? The owner of the printer, the manufacturer of the printer, or the
irresponsible person who thought it was a good idea to produce and use an untested product?
52. EN-MME/ Th. Sahner 52
Additive Manufacturing
Short introduction to the technology
Bioprinting ethics and regulation
Cornell bioengineers and physicians created an artificial ear that looks and acts like a natural one.
The conversations about the ethics of bioprinting have already begun. Organovo is printing liver cells as well as eye
tissue cells in a partnership with the National Eye Institute and National Center for Advancing Translational Sciences.
Scientists have also proposed mixing human stem cells with canine muscle cells to create enhanced organ tissue. Printing
cartilage is still the most realistic type of bioprinting, and printing whole organs is still many years away, but 3D printing
is growing in medicine quite rapidly. Conversations about the moral, ethical, and legal issues surrounding bioprinting
have started, but they will inevitably cause a lot more controversy as it becomes more commonplace.
Possibility of 3D printed drugs
Assembling chemical compounds on a molecular level using a 3D printer is possible. A researcher at the University of
Glasglow created a prototype of a 3D "Chemputer" that makes drugs and medicine. He wants to revolutionize the
pharmaceutical industry by allowing patients to print their own medicine with a chemical blueprint they get from the
pharmacy. Of course, this is a very long way off, but it stands to enable DIY chemists to create anything from cocaine to
ricin.
Safety of items that come into contact with food
Kitchenware is popular to 3D print, but the safety of the materials used is questionable.
You can print out a fork or spoon with your MakerBot, but if you use ABS plastic, it is not BPA-free. Luckily, new
filaments that are safer to put in your mouth are being created for this specific reason, but they aren't widely available yet.
Many 3D printers have spaces where bacteria can easily grow if they aren't cleaned properly, as well. In order to more
safely-produced 3D printed food and kitchenware, there may be a need for an FDA-approved machine. People probably
don't want to eat genetically-engineered pizza off of toxic plates.
53. EN-MME/ Th. Sahner 53
Additive Manufacturing
Short introduction to the technology
Some commercial aspects
54. EN-MME/ Th. Sahner 54
Additive Manufacturing
Short introduction to the technology
The costs of RM Fabrication depends basically on:
Part fabrication costs
The costs of RM parts depends on these parameters:
- Volume of the part.
- Cost of materials.
- Cost of consumables.
- Height of the part.
- Height of supports
- Number of slices
Man Power
0,1-0,5 FTE
Space requirements
Approx. 25-30m2 for the machine, container, generator stocking room
Auxiliary equipment ( temporary )
Electro erosion, milling machine and compressed air
55. EN-MME/ Th. Sahner 55
Additive Manufacturing
Short introduction to the technology
Peripherals & Consumable
Powder materials
Lifting and transportation device for material handling
Build platform ( first set is delivered with the order)
Cleaning and handling: hand sieves , brush, gloves filter mask shovel….
Recoaster blades
Antistatic waste bags
Maintenance
Software maintenance
Machine maintenance
56. EN-MME/ Th. Sahner 56
Additive Manufacturing
Short introduction to the technology
heures/5ans 9000 13500 18000 21500 27000
coût/heure €80.16 €55.44 €43.08 €37.04 €30.72
Coût machine
Années
Semaines activées
par année
Pièces par
semaine
Heure de
construction
par pièce
Nombre d’
heures de
construction
en 5ans
5 45 2 20 9000 heures
Prix de la
machine
Prix de la
machine par
heure
485000 Euro 53.89 Euro/heure
Maintenance
Années
Active mois
par année
Prix par
mois
Prix
maintenance
en 5ans
5 11 €1`910.00 105`050.00 Euro
Prix
maintenance
par heure
11.67 Euro/heure
Con
sommables
Laser Durée de vie en heures Prix Laser Laser/heure
10000 €60`000.00 6.00 Euro/heure
Racleur
Racleur
par semaine Prix racleur Racleur/heure
1 €45.00 1.13 Euro/heure
Plaque de base Plate/semaine
Prix Plaque
de base Plate/heure
0.2 €50.00 0.25 Euro/heure
Logiciel Licence & Maintenance L&M/année L&M/heure
€13`000.00 7.22 (Euro/heure)
Cout estime par heure de construction 80.16 (Euro/heure)
57. EN-MME/ Th. Sahner 57
Additive Manufacturing
Short introduction to the technology
Tableau 3 : Comparaison de coût total (Cas1 fabrication maison/ Cas2 fabrication externe)
Comparaison de coût total
Cas 1 int.
Imprimante 3D
Cas 2 ext.
par service
Coût des actifs amortissables (€) 485.000
Valeur résiduelle (€) 48.500
Durée de vie en années 5
Capital engage moyen (€) [Cem] 266.750
Prévision de production d’unités par an 60 60
Capital et autres coûts fixes :[KF]
Intérêt moyen du capital engage moyen(€) [KZAB]
Taux d’amortissement par an (€) [AB]
Autres coûts fixes, contrat de maintenance (€)
26.675
87.300
21.010
Total des coûts fixes (€) 134.985
Coûts variables par an: [KV]
Frais de personnel (€) 3.600
Matériau (€) 12.000
Coût du service (€) 0 120.000
Total des coûts variables (€) 15.600 120.000
Coût total par an (€) [KG] 150.585 120.000
Tableau 1 : Supposition Cas 1
Coût d’investissement de l’imprimante 3D 485.000 €
La durée d’utilisation 5 ans
Produit de la liquidation ou valeur résiduelle 48500 €
Maintenance - et coûts de réparation pour 1 an 21.010 €
Coûts du matériel au cm3 0,20 €
Volume moyen par unité 1000 cm3
coûts des pièces à l'unité 200,00 €
Frais de personnel par pièce 60,00 €
Pièces fabriquées par mois 5 pièces
Pièces fabriquées par an 60 pièces
Taux d'intérêt implicite (I) 10 %
58. EN-MME/ Th. Sahner 58
Additive Manufacturing
Short introduction to the technology
Future
59. EN-MME/ Th. Sahner 59
Additive Manufacturing
Short introduction to the technology
What we are doing at CERN:
Printing models in some polymer materials at CERN
Subcontracting parts in polymer
Subcontracting parts in metal
Exploring ceramic materials
Exploring the installation of an 3D metal printer
Several collaboration agreements in 3D printing
R&D to print pure Copper and Niobium
Further R&D of materials
Contact to universities and other organisations
60. EN-MME/ Th. Sahner 60
Additive Manufacturing
Short introduction to the technology
?
Many exiting examples can be found under: http://www.3ders.org/applications.html
61. EN-MME/ Th. Sahner 61
Additive Manufacturing
Short introduction to the technology
Thank you for your attention
Merci pour votre attention