02 drilling preparation ui 15 sep 2007
•
1 like•218 views
The document outlines the key elements of a drilling plan for an oil and gas well, including: 1. Rig specifications and layout, size calculations, torque and drag calculations, casing and cementing procedures, wellhead design and installation. 2. Mud engineering and design, directional drilling plan, drill string design, drilling optimization, bit selection, and formation evaluation including logging, coring, and testing. 3. Health, safety, environment procedures and an emergency response plan.
Report
Share
Report
Share
Download to read offline
Recommended
The southwestern border_area
This map depicts the Southwestern border area of an unspecified country. It shows distances of 300 miles on the left and right sides and 150 miles on the top, with the bottom extending 300 miles. The map was created by Prof. Schmidt and PJ on August 10, 2010.
presentation-IX-SURVEY-MODIF
IXBlue is a company that specializes in measuring and understanding physical marine environments. It has 35 employees and generates over 8.5 million euros in annual revenue, 30% of which comes from marine renewable energy projects. IXBlue has offices in France, the UK, and Australia. It operates its own fleet of vessels and provides oceanographic measurements, hydrographic and geophysical surveys, environmental studies, and vessel sea trials. IXBlue prioritizes highly trained personnel, safety, and environmentally friendly operations.
The 3 minute actuarial certificate
This document describes how to obtain an actuarial certificate in just 3 minutes by starting on the home page, entering fund, member, and transaction details, agreeing to terms, making a payment, and receiving the certificate - all in only 3 minutes for a cost of $110 plus GST.
A Look Into Offshore and Drill Preparation | Maritime Drilling School
How Offshore rigs operate and Land rigs need a lot of preparation when it comes to the paperwork to the drilling initial holes to set up the rig there is a lot of work that goes into it. In this presentation you'll learn all about how a land rig site is prepared.
CEMVIEW | Cementing Engineering Toolbox
Calculation of volumes, materials, cost required for cementing operations has been challenging. CEMVIEW allows users to quickly and accurately perform the calculations through visual and animated schematics. Users can create realistic, various combinations of casing / liner strings for land or offshore wells in one session.
MMD Question Paper
This document contains information about an examination for a Mechanisms and Mechanical Design course, including eight multi-part questions covering topics like pantographs, linkages, cams, gears, springs, and other mechanical systems. The questions range from simple calculations to more complex design problems. The document provides diagrams, equations, and specific values to help students solve the problems.
01 cálculos de cementación primaria
This document provides instructions for calculating key parameters for primary cement jobs, including:
- Slurry and preflush volumes based on annular capacities from caliper logs
- Cement quantities based on total slurry volume and slurry yield
- Displacement volume based on float collar depth and casing capacity
- Water requirements for mixing, washing, displacement, and equipment cleaning
- Maximum lifting force to prevent casing buoyancy issues during pumping
Worked examples are provided to demonstrate how to perform the calculations for a sample well cementing job.
Subsurface Pumps, pumpsandpipesmdhc
The document discusses various pumping systems used in oil and gas extraction. It lists several common pumping methods including gas lift, plunger lift, sucker rod pumps, electric submersible pumps, hydraulic jet pumps, progressing cavity pumps, and notes that the challenge is efficiently transferring energy to deeper pumps in increasingly difficult environments. It concludes by inviting questions about oilfield pumping equipment photos.
Recommended
The southwestern border_area
This map depicts the Southwestern border area of an unspecified country. It shows distances of 300 miles on the left and right sides and 150 miles on the top, with the bottom extending 300 miles. The map was created by Prof. Schmidt and PJ on August 10, 2010.
presentation-IX-SURVEY-MODIF
IXBlue is a company that specializes in measuring and understanding physical marine environments. It has 35 employees and generates over 8.5 million euros in annual revenue, 30% of which comes from marine renewable energy projects. IXBlue has offices in France, the UK, and Australia. It operates its own fleet of vessels and provides oceanographic measurements, hydrographic and geophysical surveys, environmental studies, and vessel sea trials. IXBlue prioritizes highly trained personnel, safety, and environmentally friendly operations.
The 3 minute actuarial certificate
This document describes how to obtain an actuarial certificate in just 3 minutes by starting on the home page, entering fund, member, and transaction details, agreeing to terms, making a payment, and receiving the certificate - all in only 3 minutes for a cost of $110 plus GST.
A Look Into Offshore and Drill Preparation | Maritime Drilling School
How Offshore rigs operate and Land rigs need a lot of preparation when it comes to the paperwork to the drilling initial holes to set up the rig there is a lot of work that goes into it. In this presentation you'll learn all about how a land rig site is prepared.
CEMVIEW | Cementing Engineering Toolbox
Calculation of volumes, materials, cost required for cementing operations has been challenging. CEMVIEW allows users to quickly and accurately perform the calculations through visual and animated schematics. Users can create realistic, various combinations of casing / liner strings for land or offshore wells in one session.
MMD Question Paper
This document contains information about an examination for a Mechanisms and Mechanical Design course, including eight multi-part questions covering topics like pantographs, linkages, cams, gears, springs, and other mechanical systems. The questions range from simple calculations to more complex design problems. The document provides diagrams, equations, and specific values to help students solve the problems.
01 cálculos de cementación primaria
This document provides instructions for calculating key parameters for primary cement jobs, including:
- Slurry and preflush volumes based on annular capacities from caliper logs
- Cement quantities based on total slurry volume and slurry yield
- Displacement volume based on float collar depth and casing capacity
- Water requirements for mixing, washing, displacement, and equipment cleaning
- Maximum lifting force to prevent casing buoyancy issues during pumping
Worked examples are provided to demonstrate how to perform the calculations for a sample well cementing job.
Subsurface Pumps, pumpsandpipesmdhc
The document discusses various pumping systems used in oil and gas extraction. It lists several common pumping methods including gas lift, plunger lift, sucker rod pumps, electric submersible pumps, hydraulic jet pumps, progressing cavity pumps, and notes that the challenge is efficiently transferring energy to deeper pumps in increasingly difficult environments. It concludes by inviting questions about oilfield pumping equipment photos.
Solid particle erosion sand monitoring and transport and erosion corrosion ...
This document summarizes a two-day short course on solid particle erosion, sand monitoring and transport, and erosion-corrosion in oil and gas production taught by Dr. Siamack Shirazi. The course is aimed at managers, operators, researchers, and engineers involved in production equipment. Attendees will learn how to predict and manage erosion using modeling software, monitor sand production, and understand CO2 corrosion and erosion-corrosion scenarios. The course will cover multiphase flow fundamentals, erosion mechanisms, prediction models, sand management, CO2 corrosion modeling, and erosion-corrosion case studies.
borehole 2.pdf
This document presents the results of Screw Driving Sounding (SDS) tests conducted at two sites in Malaysia and compares the SDS data to Standard Penetration Test (SPT) and Mackintosh Probe Test (MPT) data. At a site in Batu Pahat, SDS data correlated well with SPT data, with a coefficient of determination (R2) of 0.721. At a site in Cheras, SDS data correlated well with MPT data, with an R2 of 0.851. The preliminary findings suggest SDS testing has potential for soil characterization in site investigations in Malaysia.
Checklist for site preparation and establishment
This checklist outlines the key site preparation steps and considerations for a construction project, including geology, soil engineering, clearing/grubbing, demolition, earthwork, utilities, paving, and landscaping. It provides detailed questions to evaluate each area to ensure worker safety, proper planning and execution of tasks, compliance with regulations, and assignment of responsibilities. Adhering to this comprehensive checklist will help facilitate a well-organized and incident-free site preparation process.
Sand Control
Course Description
The business of fuelling the world through hydrocarbon production must be carried out with optimum profitability. Participants will learn how sand production and inadvertent formation damage can erode these profits. Methods and procedures will be presented to guide the participants in decision making with regard to completing a well with optimum control of formation sand while incurring minimal damage to the well or production zone. Extensive theory will be presented illustrating why certain practices should either be employed or strictly avoided. The very latest in the use of forecasting methods, tools, techniques, and personal experiences will be presented.
By attending the 5 day training course, you will be able to:
Assess how rock will fail and how this analysis is used to determine the appropriate sand control method.
Interpret particle size distribution data.
Determine the appropriate sand control method when provided with appropriate reservoir and production data.
Select completion equipment and associated tooling for sand control (screens, gravels, work strings, barrier valves etc.)
Produce an outline installation procedure for the main types of sand control.
Troubleshoot sand control problems.
cv english hendra fix
Hendra Permana is seeking a position with an expected salary of Rp. 5,000,000,00. He has experience in diving, hydrology, GIS mapping, risk assessment, and HSE auditing and documentation. Currently he works as an HSE Staff at PT. Nana Yamano Technik Drilling Oil & Gas Companies where he ensures safety compliance and reporting. He holds several certificates in safety, diving, and languages.
Curriculum Vitae
Ghulam Asghar is seeking a career-oriented position utilizing his education and 8 years of experience in petroleum geology, mineral exploration, structural geology, and hydrology. He has a BS in geology from the University of Sindh and has worked on various projects studying coal reserves, drilling tube wells, and exploring barite, lead, and zinc deposits. His experience includes core logging, sample analysis, lithological mapping, resource estimation, and supervising drilling operations. He is proficient in English, Urdu, Sindhi, and Siraiki and has experience using geological software such as Surfer, Coral Draw, AutoCade, RockWorks, and MapInfo.
Curriculum Vitae
Ghulam Asghar is seeking a career-oriented position utilizing his education and 8 years of experience in petroleum geology, mineral exploration, structural geology, and hydrology. He has a BS in geology from the University of Sindh with a 3.4 CGPA. His work experience includes exploring coal reserves, drilling tube wells, and barite, lead and zinc exploration. Currently he is working on a water master plan for the Thar Coal Field involving hydrological studies. He is proficient in geological software and has strong English, Urdu, Sindhi and Siraiki language skills.
Loading Facility Concept.pptx
The document outlines the engineering requirements and outputs for designing an LNG loading facility concept. The concept includes a mooring buoy, rigid pipeline, pipe supports, and flexible line to transport LNG from an LNG carrier ship to shore. For each component, the document lists the required input data and the engineering outputs which would be designed, such as the mooring analysis, pipeline routing and sizing, pipe support structures, and flexible line sizing. The overall goal is to design an LNG loading facility that can safely and reliably transport LNG from ship to shore via the different components.
Conceptual and geometric design of tunnel and quantity estimation
This document provides a conceptual and geometric design for the Nahhaki Tunnel and quantity estimation in Pakistan. It includes a literature review on tunnel design and construction aspects such as site selection, ventilation systems, hazard reporting, and risk assessment. The study area, available data sets, methodology, and outputs from ArcGIS and CAD software are also described. The project aims to construct a tunnel through a ridge to reduce travel time. Surveying, software tools, and design are used to establish the tunnel route and associated structures while addressing issues and ensuring safety standards are met.
KL ITB - NTU - NUS
Presentation for visiting NUS - NTU Singapore
Ocean Engineering ITB Master/Graduate Student Field Trip
August 26-29th, 2013
credits: Ajie Nur Rendragaha
Foundations for New Champlain Bridge Corridor Project
This is a report on the project done in iNSE 6230 at Concordia University. It shows all the phases done in the project.
Intern report - IMC
This document is a summer internship report prepared by Kartik Sharma for his internship with IMC-SRG Consulting (P) Limited from May-June 2013. The report provides acknowledgments, an introduction to the internship, and sections on geotechnical analysis, working in AutoCAD Map 3D, and working in Surpac software. Key activities included geotechnical analysis of a fluorite mining project in Morocco for Gujarat Fluorochemicals Ltd, designing a pit model in AutoCAD Map 3D, and optimizing a pit design and creating a 3D solid model in Surpac software.
Cv career history
Joseph Z. Bracic has over 30 years of experience as a petroleum engineer working on completion and production projects around the world. He has worked as a consultant for companies like Hess Corporation and as an advisor for Arabian Gulf Oil Company. Some of his responsibilities have included completion design, artificial lift optimization, sand control evaluation, and production strategy development. He utilizes his expertise in areas like hydraulic fracturing, chemical compatibility testing, downhole monitoring, and reservoir surveillance to improve well and field performance.
Introduction to Mudlogging
Very basic Idea about mudlogging field for starter and new comers. A very brief summary of working experience of Oil rig.
GSA 2015 - Computer Based Facies Simulations in Orebodies: Benefits, Drawback...
Many computer program packages are available to utilize in geostatistical interpretation. These include VULCAN, PETRA, GEOGRAPHIX, and in the case of this example I will be using SGEMS - a freeware program. Kriging : Derives the best linear estimate of the variable over a given surface. Smoothing properties of interpolation algorithms replace local detail and replace with a good average. Geologists and reservoir engineers / mining conditions require finer scaled details of reservoir heterogeneity – Kriging is the average of numerous realizations, we may want to see these iterations to determine best fit scenarios
FOUNDRY FORGING AND WELDING LABORATORY 2022 PART A.pdf
The document provides information about foundry, forging, and welding lab experiments conducted at the University B.D.T College of Engineering. It includes sections on testing molding sand and core sand properties, safety precautions for the lab, objectives and outcomes of the course, and content that will be covered including molding sand tests, welding practice, and forging operations. The document serves as a manual for students outlining the experiments and procedures they will perform in the lab.
Update - CV[2 e] - --AIS
This curriculum vitae outlines the educational and professional experience of Doghudje Ojefiadowho Felix. He received a B.Sc. in Mechanical Engineering from the University of Lagos in 1980. His career includes over 30 years of experience managing construction and commissioning projects in the oil and gas industry in Nigeria, working for companies like Shell, Frontier Oil Limited, and other contractors. He currently serves as the Pre-Commissioning Manager for a gas pipeline project.
Petunjuk-Praktis-Nikon-Nivo-C-Series-Indonesia-1.pdf
Manual ini memberikan instruksi tentang pengoperasian Total Station Nikon Nivo C series, mencakup pengenalan alat, prosedur pengukuran, dan pengukuran poligon/traverse. Alat ini mampu mengukur dengan dan tanpa prisma, menggunakan Windows CE."
More Related Content
Similar to 02 drilling preparation ui 15 sep 2007
Solid particle erosion sand monitoring and transport and erosion corrosion ...
This document summarizes a two-day short course on solid particle erosion, sand monitoring and transport, and erosion-corrosion in oil and gas production taught by Dr. Siamack Shirazi. The course is aimed at managers, operators, researchers, and engineers involved in production equipment. Attendees will learn how to predict and manage erosion using modeling software, monitor sand production, and understand CO2 corrosion and erosion-corrosion scenarios. The course will cover multiphase flow fundamentals, erosion mechanisms, prediction models, sand management, CO2 corrosion modeling, and erosion-corrosion case studies.
borehole 2.pdf
This document presents the results of Screw Driving Sounding (SDS) tests conducted at two sites in Malaysia and compares the SDS data to Standard Penetration Test (SPT) and Mackintosh Probe Test (MPT) data. At a site in Batu Pahat, SDS data correlated well with SPT data, with a coefficient of determination (R2) of 0.721. At a site in Cheras, SDS data correlated well with MPT data, with an R2 of 0.851. The preliminary findings suggest SDS testing has potential for soil characterization in site investigations in Malaysia.
Checklist for site preparation and establishment
This checklist outlines the key site preparation steps and considerations for a construction project, including geology, soil engineering, clearing/grubbing, demolition, earthwork, utilities, paving, and landscaping. It provides detailed questions to evaluate each area to ensure worker safety, proper planning and execution of tasks, compliance with regulations, and assignment of responsibilities. Adhering to this comprehensive checklist will help facilitate a well-organized and incident-free site preparation process.
Sand Control
Course Description
The business of fuelling the world through hydrocarbon production must be carried out with optimum profitability. Participants will learn how sand production and inadvertent formation damage can erode these profits. Methods and procedures will be presented to guide the participants in decision making with regard to completing a well with optimum control of formation sand while incurring minimal damage to the well or production zone. Extensive theory will be presented illustrating why certain practices should either be employed or strictly avoided. The very latest in the use of forecasting methods, tools, techniques, and personal experiences will be presented.
By attending the 5 day training course, you will be able to:
Assess how rock will fail and how this analysis is used to determine the appropriate sand control method.
Interpret particle size distribution data.
Determine the appropriate sand control method when provided with appropriate reservoir and production data.
Select completion equipment and associated tooling for sand control (screens, gravels, work strings, barrier valves etc.)
Produce an outline installation procedure for the main types of sand control.
Troubleshoot sand control problems.
cv english hendra fix
Hendra Permana is seeking a position with an expected salary of Rp. 5,000,000,00. He has experience in diving, hydrology, GIS mapping, risk assessment, and HSE auditing and documentation. Currently he works as an HSE Staff at PT. Nana Yamano Technik Drilling Oil & Gas Companies where he ensures safety compliance and reporting. He holds several certificates in safety, diving, and languages.
Curriculum Vitae
Ghulam Asghar is seeking a career-oriented position utilizing his education and 8 years of experience in petroleum geology, mineral exploration, structural geology, and hydrology. He has a BS in geology from the University of Sindh and has worked on various projects studying coal reserves, drilling tube wells, and exploring barite, lead, and zinc deposits. His experience includes core logging, sample analysis, lithological mapping, resource estimation, and supervising drilling operations. He is proficient in English, Urdu, Sindhi, and Siraiki and has experience using geological software such as Surfer, Coral Draw, AutoCade, RockWorks, and MapInfo.
Curriculum Vitae
Ghulam Asghar is seeking a career-oriented position utilizing his education and 8 years of experience in petroleum geology, mineral exploration, structural geology, and hydrology. He has a BS in geology from the University of Sindh with a 3.4 CGPA. His work experience includes exploring coal reserves, drilling tube wells, and barite, lead and zinc exploration. Currently he is working on a water master plan for the Thar Coal Field involving hydrological studies. He is proficient in geological software and has strong English, Urdu, Sindhi and Siraiki language skills.
Loading Facility Concept.pptx
The document outlines the engineering requirements and outputs for designing an LNG loading facility concept. The concept includes a mooring buoy, rigid pipeline, pipe supports, and flexible line to transport LNG from an LNG carrier ship to shore. For each component, the document lists the required input data and the engineering outputs which would be designed, such as the mooring analysis, pipeline routing and sizing, pipe support structures, and flexible line sizing. The overall goal is to design an LNG loading facility that can safely and reliably transport LNG from ship to shore via the different components.
Conceptual and geometric design of tunnel and quantity estimation
This document provides a conceptual and geometric design for the Nahhaki Tunnel and quantity estimation in Pakistan. It includes a literature review on tunnel design and construction aspects such as site selection, ventilation systems, hazard reporting, and risk assessment. The study area, available data sets, methodology, and outputs from ArcGIS and CAD software are also described. The project aims to construct a tunnel through a ridge to reduce travel time. Surveying, software tools, and design are used to establish the tunnel route and associated structures while addressing issues and ensuring safety standards are met.
KL ITB - NTU - NUS
Presentation for visiting NUS - NTU Singapore
Ocean Engineering ITB Master/Graduate Student Field Trip
August 26-29th, 2013
credits: Ajie Nur Rendragaha
Foundations for New Champlain Bridge Corridor Project
This is a report on the project done in iNSE 6230 at Concordia University. It shows all the phases done in the project.
Intern report - IMC
This document is a summer internship report prepared by Kartik Sharma for his internship with IMC-SRG Consulting (P) Limited from May-June 2013. The report provides acknowledgments, an introduction to the internship, and sections on geotechnical analysis, working in AutoCAD Map 3D, and working in Surpac software. Key activities included geotechnical analysis of a fluorite mining project in Morocco for Gujarat Fluorochemicals Ltd, designing a pit model in AutoCAD Map 3D, and optimizing a pit design and creating a 3D solid model in Surpac software.
Cv career history
Joseph Z. Bracic has over 30 years of experience as a petroleum engineer working on completion and production projects around the world. He has worked as a consultant for companies like Hess Corporation and as an advisor for Arabian Gulf Oil Company. Some of his responsibilities have included completion design, artificial lift optimization, sand control evaluation, and production strategy development. He utilizes his expertise in areas like hydraulic fracturing, chemical compatibility testing, downhole monitoring, and reservoir surveillance to improve well and field performance.
Introduction to Mudlogging
Very basic Idea about mudlogging field for starter and new comers. A very brief summary of working experience of Oil rig.
GSA 2015 - Computer Based Facies Simulations in Orebodies: Benefits, Drawback...
Many computer program packages are available to utilize in geostatistical interpretation. These include VULCAN, PETRA, GEOGRAPHIX, and in the case of this example I will be using SGEMS - a freeware program. Kriging : Derives the best linear estimate of the variable over a given surface. Smoothing properties of interpolation algorithms replace local detail and replace with a good average. Geologists and reservoir engineers / mining conditions require finer scaled details of reservoir heterogeneity – Kriging is the average of numerous realizations, we may want to see these iterations to determine best fit scenarios
FOUNDRY FORGING AND WELDING LABORATORY 2022 PART A.pdf
The document provides information about foundry, forging, and welding lab experiments conducted at the University B.D.T College of Engineering. It includes sections on testing molding sand and core sand properties, safety precautions for the lab, objectives and outcomes of the course, and content that will be covered including molding sand tests, welding practice, and forging operations. The document serves as a manual for students outlining the experiments and procedures they will perform in the lab.
Update - CV[2 e] - --AIS
This curriculum vitae outlines the educational and professional experience of Doghudje Ojefiadowho Felix. He received a B.Sc. in Mechanical Engineering from the University of Lagos in 1980. His career includes over 30 years of experience managing construction and commissioning projects in the oil and gas industry in Nigeria, working for companies like Shell, Frontier Oil Limited, and other contractors. He currently serves as the Pre-Commissioning Manager for a gas pipeline project.
Similar to 02 drilling preparation ui 15 sep 2007 (17)
Solid particle erosion sand monitoring and transport and erosion corrosion ...
Solid particle erosion sand monitoring and transport and erosion corrosion ...
Conceptual and geometric design of tunnel and quantity estimation
Conceptual and geometric design of tunnel and quantity estimation
Foundations for New Champlain Bridge Corridor Project
Foundations for New Champlain Bridge Corridor Project
GSA 2015 - Computer Based Facies Simulations in Orebodies: Benefits, Drawback...
GSA 2015 - Computer Based Facies Simulations in Orebodies: Benefits, Drawback...
FOUNDRY FORGING AND WELDING LABORATORY 2022 PART A.pdf
FOUNDRY FORGING AND WELDING LABORATORY 2022 PART A.pdf
More from yudi05
Petunjuk-Praktis-Nikon-Nivo-C-Series-Indonesia-1.pdf
Manual ini memberikan instruksi tentang pengoperasian Total Station Nikon Nivo C series, mencakup pengenalan alat, prosedur pengukuran, dan pengukuran poligon/traverse. Alat ini mampu mengukur dengan dan tanpa prisma, menggunakan Windows CE."
06 hydraulic workover unit trisakti 25 nov 2007
This document discusses hydraulic workover units (HWO units) used for well maintenance. It provides information on:
- What an HWO unit is and its history of development since 1929
- The uses of HWO units, which include pulling/running completions, fishing, cementing, and more
- The types of HWO units - short stroke and long stroke
- Specifications for short stroke and long stroke units including maximum lift/snubbing forces, stroke length, and torque ratings
- Benefits of using HWO units such as versatility of use onshore/offshore, ease of transportation, ability to pull and push, and reduced costs
- Components of an HWO unit including j
05 well testing trisakti 25 nov 2007
This document provides an overview of well testing equipment and procedures used by Power Well Service Groups and Halliburton to evaluate oil and gas reservoirs. It begins by expressing appreciation for the companies providing well testing presentation materials. It then covers various types of well testing equipment like drill stem testing tools and surface testing packages. The remainder of the document discusses objectives and details of drill stem testing and describes components of typical open hole and cased hole drill stem testing systems. It also covers surface well testing facilities, data acquisition systems, reporting formats, and emergency shutdown systems.
03 drilling recent development ui 17 sep 2007
This document summarizes recent developments in drilling technology, including continuous circulating systems, managed pressure drilling, dual gradient systems, casing while drilling, solid expandable tubulars, high angle/extended reach drilling, integrated hole quality monitoring, rotary steering systems, torque and drag management, and flexible rig technologies. It provides definitions, diagrams, and examples for each technology.
Buku bahasa arab_mi_1_siswa
Buku ini berisi penjelasan tentang pelajaran Bahasa Arab untuk siswa kelas 1 Madrasah Ibtidaiyah yang menerapkan Kurikulum 2013. Buku ini berisi kosa kata dan kalimat Bahasa Arab tentang topik kegiatan sehari-hari seperti mengabsen, berkenalan, alat tulis menulis, peralatan sekolah, angka 1-10, nama hari, buah-buahan, dan warna-warna.
More from yudi05 (19)
224572323-Petunjuk-Praktis-Nikon-Nivo-C-Series-Indonesia-1.pdf
224572323-Petunjuk-Praktis-Nikon-Nivo-C-Series-Indonesia-1.pdf
Petunjuk-Praktis-Nikon-Nivo-C-Series-Indonesia-1.pdf
Petunjuk-Praktis-Nikon-Nivo-C-Series-Indonesia-1.pdf
Recently uploaded
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
Time Division Multiplexing (TDM) is a method of transmitting multiple signals over a single communication channel by dividing the signal into many segments, each having a very short duration of time. These time slots are then allocated to different data streams, allowing multiple signals to share the same transmission medium efficiently. TDM is widely used in telecommunications and data communication systems.
### How TDM Works
1. **Time Slots Allocation**: The core principle of TDM is to assign distinct time slots to each signal. During each time slot, the respective signal is transmitted, and then the process repeats cyclically. For example, if there are four signals to be transmitted, the TDM cycle will divide time into four slots, each assigned to one signal.
2. **Synchronization**: Synchronization is crucial in TDM systems to ensure that the signals are correctly aligned with their respective time slots. Both the transmitter and receiver must be synchronized to avoid any overlap or loss of data. This synchronization is typically maintained by a clock signal that ensures time slots are accurately aligned.
3. **Frame Structure**: TDM data is organized into frames, where each frame consists of a set of time slots. Each frame is repeated at regular intervals, ensuring continuous transmission of data streams. The frame structure helps in managing the data streams and maintaining the synchronization between the transmitter and receiver.
4. **Multiplexer and Demultiplexer**: At the transmitting end, a multiplexer combines multiple input signals into a single composite signal by assigning each signal to a specific time slot. At the receiving end, a demultiplexer separates the composite signal back into individual signals based on their respective time slots.
### Types of TDM
1. **Synchronous TDM**: In synchronous TDM, time slots are pre-assigned to each signal, regardless of whether the signal has data to transmit or not. This can lead to inefficiencies if some time slots remain empty due to the absence of data.
2. **Asynchronous TDM (or Statistical TDM)**: Asynchronous TDM addresses the inefficiencies of synchronous TDM by allocating time slots dynamically based on the presence of data. Time slots are assigned only when there is data to transmit, which optimizes the use of the communication channel.
### Applications of TDM
- **Telecommunications**: TDM is extensively used in telecommunication systems, such as in T1 and E1 lines, where multiple telephone calls are transmitted over a single line by assigning each call to a specific time slot.
- **Digital Audio and Video Broadcasting**: TDM is used in broadcasting systems to transmit multiple audio or video streams over a single channel, ensuring efficient use of bandwidth.
- **Computer Networks**: TDM is used in network protocols and systems to manage the transmission of data from multiple sources over a single network medium.
### Advantages of TDM
- **Efficient Use of Bandwidth**: TDM all
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Recycled Concrete Aggregate in Construction Part II
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
this notes have been created
by Eric36 at nyamata ttc
after readings
pe book for y2sme .
The Python for beginners. This is an advance computer language.
Python language is very important language at this time. we can easily understand this language by these notes.
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
For International shipping and maritime laws all wood must contain the ISPM 15 Stamp. Here is how and why.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Modelagem de um CSTR com reação endotermica.pdf
Modelagem em função de transferencia. CSTR não-linear.
Recently uploaded (20)
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
Recycled Concrete Aggregate in Construction Part II
Recycled Concrete Aggregate in Construction Part II
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
The Python for beginners. This is an advance computer language.
The Python for beginners. This is an advance computer language.
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
02 drilling preparation ui 15 sep 2007
- 1. By R. Harry Eddyarso PT. SARIPARI PERTIWI ABADI 15 September 2006 “KMI Goes to Campus Program” Komunitas Migas Indonesia – Universitas Indonesia
- 2. 1. Rig Type Including Rig Lay-Out Diagram (for Land Rig & Swamp Barge) 2. Rig Size Calculation 3. Torque & Drag Calculation 4. Casing / Liner Design & Cementing Procedures 5. Wellhead Design & Installation 6. Mud Engineering & Design 7. Directional Drilling Plan & Drill String Design 8. Drilling Hydraulic Optimization 9. Bit Selection 10.Formation Evaluation (Logging, Coring) 11.BOP Stack Diagram & Well Control Procedures 12.Drill Stem Testing Procedures, Well Stimulation and or Well Completion 13.Health, Safety, Environment 14.Emergency Response Plan (ERP) 15. Etc
- 10. Closest location between fault and well path at depth –3064’ tvdss Closest distance from the fault = 95 mtr. Fault position error bar = 30 mtr. Drilling target radius = 50 ft.
- 11. Open Hole Logging Package: 1. Resistivity / Sonic 2. Density / Porosity 3. Core Sampling 4. Dipmeter 5. RFT 6. Velocity Survey Cased Hole Logging Package: 1. CBL/VDL/CET
- 12. Net to Gross map Gross Net Net B-29A2 Net to Gross Map