POH=-log[OH-] =-log(0.005) =2.301 PH=14-2.301=11..pdf

•

0 likes•3 views

POH=-log[OH-] =-log(0.005) =2.301 PH=14-2.301=11.69 Solution POH=-log[OH-] =-log(0.005) =2.301 PH=14-2.301=11.69.

More from singhanubhav1234

Silica Fume is a very reactive pozzolana because of its chemical and physical properties. Pozzolona reacts with the Calcium Hydroxide which is by product of the hydration reaction to form compounds having cementitious properties. Hence when silica fume is not used, the calcium hydroxide (Formed after hydration reaction) remains as it is which does not have any cementitious properties. By adding Silica fume, calcium hydorxide is converted to cementitious products. Solution Silica Fume is a very reactive pozzolana because of its chemical and physical properties. Pozzolona reacts with the Calcium Hydroxide which is by product of the hydration reaction to form compounds having cementitious properties. Hence when silica fume is not used, the calcium hydroxide (Formed after hydration reaction) remains as it is which does not have any cementitious properties. By adding Silica fume, calcium hydorxide is converted to cementitious products..

Silica Fume is a very reactive pozzolana because of its chemical and.pdf

singhanubhav1234

Problem 01 #!usrbinperl use strict; use warnings; $_ = .pdf

singhanubhav1234

enzymes active site does not have the exact sha.pdf

singhanubhav1234

Multicasting: It is the communication between a single sender and multiple receivers on a network. Typical uses include the updating of mobile workers from a home office and the episodic issuance of online newsletters IGMP works as: Internet Group Management Protocol is allows a host to promote its multicast group membership to adjacent switches and routers. IGMP is used by the TCP/IP protocol set to achieve dynamic multicasting When a multicast transmission initiates the software creates a multicast group. This multicast group address consists of an IP address by the first octet in the range 224 – 239 and is particular in the IP packet as the end address for this traffic. The host initiate the transmission send a message to the 224.0.0.2 address specify the multicast group address. And the switch receives this message and adds the multicast group to its table and adds the receiving port as a member of the group. PIM works as: The PIM protocol can be configured to work on IPv4 and IPv6 networks. Multicast protocols are used to carry multicast packets from one source to multiple receivers. They ease better bandwidth use and use less host and router processing and ideal for usage in applications such as video and audio. PIM is a usually used multicast routing protocol. SDN: Software Defined Networking is an upcoming architecture that is dynamic, manageable and adaptable of making it perfect for the dynamic nature of today\'s applications. Open Flow: Open Flow is enable for researchers to run experimental protocols in the campus networks we use every day. Open Flow is added as a feature to saleable Ethernet switches, routers and wireless access points and provide a regular hook to allow researchers to run experiments without require vendors to expose the inner workings of their network devices. Solution Multicasting: It is the communication between a single sender and multiple receivers on a network. Typical uses include the updating of mobile workers from a home office and the episodic issuance of online newsletters IGMP works as: Internet Group Management Protocol is allows a host to promote its multicast group membership to adjacent switches and routers. IGMP is used by the TCP/IP protocol set to achieve dynamic multicasting When a multicast transmission initiates the software creates a multicast group. This multicast group address consists of an IP address by the first octet in the range 224 – 239 and is particular in the IP packet as the end address for this traffic. The host initiate the transmission send a message to the 224.0.0.2 address specify the multicast group address. And the switch receives this message and adds the multicast group to its table and adds the receiving port as a member of the group. PIM works as: The PIM protocol can be configured to work on IPv4 and IPv6 networks. Multicast protocols are used to carry multicast packets from one source to multiple receivers. They ease better bandwidth use and use less host and route.

MulticastingIt is the communication between a single sender and m.pdf

singhanubhav1234

just moved a new USB 2.0 device from a new system to an older system. The new device worked properly on the new system but doesn’t install properly on the older system. All other USB devices work properly on the older system. C. The old system’s BIOS is out-of-date and needs to be upgraded. Solution just moved a new USB 2.0 device from a new system to an older system. The new device worked properly on the new system but doesn’t install properly on the older system. All other USB devices work properly on the older system. C. The old system’s BIOS is out-of-date and needs to be upgraded..

just moved a new USB 2.0 device from a new system to an older system.pdf

singhanubhav1234

Introduction Few things are more aggravating to produce on a worksite than concrete. Bags of cement, sand, aggregate (gravel) and possibly other additives must be delivered to the construction area. A supply of clean water is also necessary, along with a rented concrete mixing hopper. Even after all the dusty and heavy ingredients have been loaded into the hopper, one small error in the wet/dry ratio can render an entire batch of concrete unusable. One common solution to this messy and time-consuming problem is “READY MIX CONCRETE”. Ready-mix concrete (RMC) is a ready-to-use material, with predetermined mixture of cement, sand, aggregates and water. RMC is a type of concrete manufactured in a factory according to a set recipe or as per specifications of the customer, at a centrally located batching plant. It is delivered to a worksite, often in truck mixers capable of mixing the ingredients of the concrete en route or just before delivery of the batch. This results in a precise mixture, allowing specialty concrete mixtures to be developed and implemented on construction sites. The second option available is to mix the concrete at the batching plant and deliver the mixed concrete to the site in an agitator truck, which keeps the mixed concrete in correct form. In the case of the centrally mixed type, the drum carrying the concrete revolves slowly so as to prevent the mixed concrete from \"segregation\" and prevent its stiffening due to initial set. However, in the case of the truck-mixed concrete, the batched materials (sand, gravel and cement) are carried and water is added just at the time of mixing. In this case the cement remains in contact with the wet or moist material and this phase cannot exceed the permissible period, which is normally 90 minutes. The use of the RMC is facilitated through a truck-mounted \'boom placer\' that can pump the product for ready use at multi-storied construction sites. A boom placer can pump the concrete up 80 meters. Objective - Manufacturing process of ready mix concrete. Procedure – Materials required for RMC – Admixture: A substance added to the basic concrete mixture to alter one or more properties of the concrete; i.e. fibrous materials for reinforcing, water repellent treatments, and coloring compounds. Aggregate: Inert particles (i.e. gravel, sand, and stone) added to cement and water to form concrete. Cement: Dry powder that reacts chemically with water to bind the particles of aggregate, forming concrete. Portland cement is typically used in concrete production. Fly ash: Fly ash is a by-product from coal-fired electricity generating power plants. The coal used in these power plants is mainly composed of combustible elements such as carbon, hydrogen and oxygen (nitrogen and sulfur being minor elements), and non-combustible impurities (10 to 40%) usually present in the form of clay, shale, quartz, feldspar and limestone. As the coal travels through the high-temperature zone in the furnace, the combus.

IntroductionFew things are more aggravating to produce on a worksi.pdf

singhanubhav1234

D) Rb Solution D) Rb .pdf

singhanubhav1234

idkSolutionidk.pdf

singhanubhav1234

function [M]=trajectory3(x,y,z,pitcher,roll,yaw,scale_factor,step,selector,varargin); % operate trajectory2(x,y,z,pitcher,roll,yaw,scale_factor,step,[selector,SoR]) % % % x,y,z center mechanical phenomenon (vector) [m] % % pitcher,roll,yaw euler\'s angles [rad] % % issue|multiplier|multiplier factor} standardisation factor [scalar] % (related to body craft dimension) % % step angle sampling issue [scalar] % (the points variety between 2 body models) % % chooseor select the body model [string] % % gripen JAS thirty-nine Gripen heli chopper % mig Mig ah64 Apache chopper % Felis catus Tomcat(Default) a10 % jet Generic jet cessna Cessna % 747 Boeing 747 airplane Generic airplane % md90 MD90 jet shuttle space vehicle % dc10 DC-10 jet % % elective INPUT: % % % read sets the camera read. Use Matlab\'s \"viewer\" as argument to reprocess this read. % % Note: % % Refernce System: % X body- The axial force on the X body axis is % positive on forward; the momentum around X body % is positive roll clockwise as viewered from behind; % Y body- The facet force on the Y body axis is % positive on the correct wing; the instant around Y % body is positive in pitcher up; % Z body- the conventional force on the Z body axis is % positive down; the instant around Z body is positive % roll clockwise as viewered from higher than. % % ******************************* % operate Version three.0 % 7/08/2004 (dd/mm/yyyy) % Valerio Scordamaglia % v.scordamaglia@tiscali.it % ******************************* if nargin<9 disp(\' Wrong:\'); disp(\' Wrong: Invalid variety Inputs!\'); M=0; return; end if (len(x)~=len(y))|(len(x)~=len(z))|(len(y)~=len(z)) disp(\' Wrong:\'); disp(\' Uncorrect Dimension of the middle mechanical phenomenon Vectors. Please Check the size\'); M=0; return; end if ((len(pitcher)~=len(roll))||(len(pitcher)~=len(yaw))||(len(roll)~=len(yaw))) disp(\' Wrong:\'); disp(\' Uncorrect Dimension of the euler\'\'s angle Vectors. Please Check the size\'); M=0; return; end if len(pitcher)~=len(x) disp(\' Wrong:\'); disp(\' Size match between euler\'\'s angle vectors and center mechanical phenomenon vectors\'); M=0; return end if step>=len(x) disp(\' Wrong:\'); disp(\' angle samplig reckon of vary. scale back step\'); M=0; return end if step<1 step=1; end if nargin==10 theViewer=cell2mat(varargin(1)); end if nargin>10 disp(\'Too several inputs arguments\'); M=0; return end if nargin<10 theViewer=[82.50 2]; end mov=nargout; cur_dir=pwd; if strcmp(selector,\'shuttle\') load shuttle; V=[-V(:,2) V(:,1) V(:,3)]; V(:,1)=V(:,1)-round(sum(V(:,1))/size(V,1)); V(:,2)=V(:,2)-round(sum(V(:,2))/size(V,1)); V(:,3)=V(:,3)-round(sum(V(:,3))/size(V,1)); elseif strcmp(selector,\'helicopter\') load helicopter; V=[-V(:,2) V(:,1) V(:,3)]; V(:,1)=V(:,1)-round(sum(V(:,1))/size(V,1)); V(:,2)=V(:,2)-round(sum(V(:,2))/size(V,1)); V(:,3)=V(:,3)-round(sum(V(:,3))/size(V,1)); elseif strcmp(selector,\'747\') load boeing_747; V=[V(:,2) V(:,1) V(:,3)]; V(:,1)=V(:,1)-round(sum(V(:,1))/size(V,1)); V(:.

function [M]=trajectory3(x,y,z,pitcher,roll,yaw,scale_factor,step,se.pdf

singhanubhav1234

Evolution of mitochondria. Mitochondria are believed to have arisen as prokaryotic cells that got entrapped within a eukaryotic cell. This event is believed to have occurred 1.4 billion years ago. This theory is the Endosymbiotic theory of the origin of mitochondria. It states that mitochondria were probably evolved from specialized bacteria which through the phenomenon of endocytosis were incorporated in to the cytoplasm of an eukaryote. There is no experimental evidence for the above theory but circumstantial evidence has been put forward by researchers. They are., Solution Evolution of mitochondria. Mitochondria are believed to have arisen as prokaryotic cells that got entrapped within a eukaryotic cell. This event is believed to have occurred 1.4 billion years ago. This theory is the Endosymbiotic theory of the origin of mitochondria. It states that mitochondria were probably evolved from specialized bacteria which through the phenomenon of endocytosis were incorporated in to the cytoplasm of an eukaryote. There is no experimental evidence for the above theory but circumstantial evidence has been put forward by researchers. They are.,.

Evolution of mitochondria.Mitochondria are believed to have arisen.pdf

singhanubhav1234

DSolutionD.pdf

singhanubhav1234

Answer: Recombinant DNA Technology: It is the set of techniques that enables the DNA from different sources to be identified, isolated, and recombined so that new characterstics can be introduced into an organism. One of the main techniques in recombinant DNA technology is DNA cloning. The DNA cloning produces an unlimited number of copies of a particular DNA segment (from a single ancestral DNA molecule). The Recombinant DNA Technology was engineered by Stanley Norman Cohen and Herbert Boyer in 1973. The cell based DNA cloning involve following 4 steps: 1) Construction of recombinant DNA molecule: The hybrid DNA molecules are constructed by in-vitro covalant attachment (ligation) of the desired DNA fragments to a replicon. 2) Transformation: The recombinant DNA molecules are transferred into host cells, in which the chosen replicon can undergo DNA replication. 3) Selective propogation of cell clones: The targeted cells were propogated in the selective liquid medium. 4) Isolation of recombinant DNA clones: The recombinant DNA clones are selectively isolated. * The enzymes used in the recombinant DNA technology are basically of 4 types: DNA polymerase, Nucleases, Restriction Enzymes, Isoschizomers Restriction enzymes: Most naturally occuring DNA molecules are much larger than can be readily analysed in the lab. To study individual gene and individual site on DNA, the large DNA molecules must be broken into small (managable) fragments. This could be done using restriction enzymes. The restriction enzymes are bacterial enzymess that able to cut double- stranded DNA molecules (by cleaving the phosphodiester bonds) at a specific nucleotide sequence, called a restriction site. The term restriction comes from the fact that these enzymes restrict the entry of foreign DNA in the bacteria. There are some enzymes that cut a three base pair sequence while others can cut four, six, and even eight base pair target sequence in a DNA molecule, usually palindromic. The naturally occurring restriction endonucleases are categorized into four groups (Types I, II III, and IV) based on their composition and enzyme cofactor requirements, the nature of their target sequence, and the position of their DNA cleavage site relative to the target sequence. For example: the one widely used restriction enzyme, EcoRI, named because it was found in certain strain of Escherichia coli and was the first (I) such enzyme found in that species. Plasmids: Plasmid are naturally occuring cicular, extrachromosomal, autonomously replicating DNA, present in many prokaryotic and few eukaryotic organisms. These are range in size from 1 Kbp to over 300 Kbp. The cloning vectors, replicating genetic element used to carry a fragment of target DNA into a host cell for the purpose of cloning. The important features of a plasmid are as follows: Solution Answer: Recombinant DNA Technology: It is the set of techniques that enables the DNA from different sources to be identified, isolated, and recom.

AnswerRecombinant DNA Technology It is the set of techniques tha.pdf

singhanubhav1234

a. Major categories: 1. Chromosomal disorders: Due to numerical or physical abnormality at the chromosome level. 2. Monogenic disorders: Due to mutation in single gene 3. Complex/Multifactorial disorders: Due to mutation in one or more than one genes together with extrinsic factors. Some genetic diseases are called as complex or multifactirial because they are caused due the combined effect of more than one factors (gene mutation along with environmental factors) and therefore they are complex un nature. For example if there is mutation in TGFA gene in a pregnant mother and sge is also exposed to smoking, she will have a significant risk of having cleft lip/palate in her child. Any of the two factor alone is not sufficient to cause disaese. b. According CDC, the leading causes of death are 1.heart attacks followed by 2, cancers, 3.respiratory diseases, 4.accidents, 5.stroke, 6.Alzheimer\'s disease, 7.diabetes, 8.influenza/pneumonia, 9.nephritis/nephrotic syndrome/nephrosis and 10.suicide. Of these 1,2,3,5,6, and 7 have genetic sysceptibility and comes under complex/multifactorial disorders. 3 and 8 are infectious diseases. c. The above disease frequency ranking applies to USA, whereas in Newyork 5th is slightly higher than 4th. In World heart attack is at the top followed by respiratory diseases, HIV and cancers. Cancer is higher in USA as compared to many other parts of the world may be due to higher incidence of smoking, fast food and industrialization. Solution a. Major categories: 1. Chromosomal disorders: Due to numerical or physical abnormality at the chromosome level. 2. Monogenic disorders: Due to mutation in single gene 3. Complex/Multifactorial disorders: Due to mutation in one or more than one genes together with extrinsic factors. Some genetic diseases are called as complex or multifactirial because they are caused due the combined effect of more than one factors (gene mutation along with environmental factors) and therefore they are complex un nature. For example if there is mutation in TGFA gene in a pregnant mother and sge is also exposed to smoking, she will have a significant risk of having cleft lip/palate in her child. Any of the two factor alone is not sufficient to cause disaese. b. According CDC, the leading causes of death are 1.heart attacks followed by 2, cancers, 3.respiratory diseases, 4.accidents, 5.stroke, 6.Alzheimer\'s disease, 7.diabetes, 8.influenza/pneumonia, 9.nephritis/nephrotic syndrome/nephrosis and 10.suicide. Of these 1,2,3,5,6, and 7 have genetic sysceptibility and comes under complex/multifactorial disorders. 3 and 8 are infectious diseases. c. The above disease frequency ranking applies to USA, whereas in Newyork 5th is slightly higher than 4th. In World heart attack is at the top followed by respiratory diseases, HIV and cancers. Cancer is higher in USA as compared to many other parts of the world may be due to higher incidence of smoking, fast food and industrialization..

a. Major categories1. Chromosomal disorders Due to numerical or .pdf

singhanubhav1234

Alcohols are organic molecules that have a very polar -OH unit somewhere. That\'s the soluble part, or the \"Like\" part that interacts with water. For instance methanol (CH3OH) or ethanol (CH3CH2OH) are infinitely soluble in water or miscible with water. As the organic molecule gets bigger, e.g., (CH3CH2CH2CH2CH2CH2CH2CH2CH2-OH) then the interactions of the other part of the molecule, or the nonpolar part of the molecule become very significant. Since these types of interactions are mostly dispersive in nature, water has a harder time disrupting those interactions to cause the solvation process to proceed. Solution Alcohols are organic molecules that have a very polar -OH unit somewhere. That\'s the soluble part, or the \"Like\" part that interacts with water. For instance methanol (CH3OH) or ethanol (CH3CH2OH) are infinitely soluble in water or miscible with water. As the organic molecule gets bigger, e.g., (CH3CH2CH2CH2CH2CH2CH2CH2CH2-OH) then the interactions of the other part of the molecule, or the nonpolar part of the molecule become very significant. Since these types of interactions are mostly dispersive in nature, water has a harder time disrupting those interactions to cause the solvation process to proceed..

Alcohols are organic molecules that have a very p.pdf

singhanubhav1234

A NEWVIEW OF GRAVITY Entropy and Gravity may be crucial concepts for explaining roots of familiar force. Gravity may be defined as masses attract each other. To scholars you could explain that space- time is warped by mass Or that without gravity, the laws of physics would differ for people moving at changing velocities. Such a simple question, has defied a direct answer for centuries. A flurry of recent papers have examined this new idea, which mixes principles from string theory and black hole physics with basic old-fashioned thermodynamics. Nobody has expressed the gravity-as-entropy except theorist Erik Verlinde of the University of Amsterdam in an online paper(arXiv.org/abs/1001.0785v1). His recipe replicates Newton\'s law of gravitational attraction, and then with some additional mathematical seasoning he arrives at Einstein\'s general relativity, the modern and undefeated champion of gravity theories. Verlinde\'s analysis indicates that gravity emerges from physical dynamics analogous to basic thermodynamic processes. \"Using only … concepts like energy, entropy and temperature,\" he writes, \"Newton\'s laws appear naturally and practically unavoidably.\" some extending Verlinde\'s idea to encompass the history of the universe. Rapid expansion just after the Big Bang and the more recent accelerating expansion of the universe might all fit into the entropic-gravity picture of reality. Entropy means \"disorder,\" with a tendency for higher entropy taken to mean that things like to get messier any system not resupplied with useful energy reaches equilibrium, and entropy is maximized. More technically, it is a measure of how likely a system is to be in its particular configuration. Low entropy describes systems with a very improbable arrangement of their parts. Curiously, the equations relating entropy to probability are precisely the same as the math used by computer scientists to quantify information. As the molecules spread out, information about their location diminishes and entropy rises. Such loss of information--or increasing entropy--drives many natural processes, such as osmosis, the mysterious migration of water across a membrane. In 1995, Ted Jacobson of the University of Maryland demonstrated that the equations of Einstein\'s general theory of relativity could be derived from basic thermodynamic principles, who discovered parallels between ordinary thermodynamics and the physics of black holes. Bekenstein showed that a black hole has entropy, determined by all the matter and energy it has swallowed. Hawking demonstrated that black holes have a temperature. Since black holes are basically nothing more than pure gravity. In 1993 Dutch Nobel physics laureate Gerard \'t Hooft. proposed that reality shares common features with holograms, like the flashy images embedded in credit cards that store apparently three-dimensional information on a flat surface. In a similar way, \'t Hooft asserted, information about the contents in three-d.

A NEWVIEW OF GRAVITYEntropy and Gravity may be crucial concepts fo.pdf

singhanubhav1234

4. Answer is colloid. follicular cells, C cells are cells in the thyroid. Calcitonin and parathyroid hormone are synthesised by the thyroid. 5. Answer T3 and T4. the hypothalamus senses the levels of the two homones and when their circulation is low releases the thyrotropic releasing hormone which stimulates the pituitary to release TSH. 6. The androgen is the male sex hormone produced in the testes. 7. ACTH is a peptide hormone Solution 4. Answer is colloid. follicular cells, C cells are cells in the thyroid. Calcitonin and parathyroid hormone are synthesised by the thyroid. 5. Answer T3 and T4. the hypothalamus senses the levels of the two homones and when their circulation is low releases the thyrotropic releasing hormone which stimulates the pituitary to release TSH. 6. The androgen is the male sex hormone produced in the testes. 7. ACTH is a peptide hormone.

4. Answer is colloid. follicular cells, C cells are cells in the thy.pdf

singhanubhav1234

256Solution256.pdf

singhanubhav1234

1A) One of the best explanation for why we conform/obey in the real world is, generally people are concerned over the thinking of other people. They tend to behave in such manner that they can correlate with others in properties like behaviors, belief, attitudes and feelings. 1B) Participants obey the researcher is also based on the above explanations. The participants obey because the researchers have more knowledge and information than them and the other fact is the participants have to be in norms of research, institute or centre. So they have to obey researchers. 2A) No; such obedience is not always beneficial. There are many examples where pupils are tending to obey the researcher in such a way that they can even forget the ethical rules. Obeying societal norms and expectations sometimes create disturbing behavior. Society is made of people so the welfare of people will create welfare society. 2B) Deviant behavior is the behavior which denies the societal norms and expectations. They are not harmful always. The criminal mind from deviant behavior can be created if it is from abnormal, inappropriate or dysfunctional mental processes. This is relied to individual’s personality. Solution 1A) One of the best explanation for why we conform/obey in the real world is, generally people are concerned over the thinking of other people. They tend to behave in such manner that they can correlate with others in properties like behaviors, belief, attitudes and feelings. 1B) Participants obey the researcher is also based on the above explanations. The participants obey because the researchers have more knowledge and information than them and the other fact is the participants have to be in norms of research, institute or centre. So they have to obey researchers. 2A) No; such obedience is not always beneficial. There are many examples where pupils are tending to obey the researcher in such a way that they can even forget the ethical rules. Obeying societal norms and expectations sometimes create disturbing behavior. Society is made of people so the welfare of people will create welfare society. 2B) Deviant behavior is the behavior which denies the societal norms and expectations. They are not harmful always. The criminal mind from deviant behavior can be created if it is from abnormal, inappropriate or dysfunctional mental processes. This is relied to individual’s personality..

1A) One of the best explanation for why we conformobey in the real .pdf

singhanubhav1234

1. Water supplies are treated with chlorine to kill pathogens. Chlorine reacts well with many other chemicals because it is a strong oxidant. What does this mean? Answer: Option 4 Because chlorine is strongly electronegative and needs one electron to fill its outer shell, it strongly pulls electrons from other substances. Explanation: Chlorine is known to be one of the most electronegative atoms of the periodic table ( with a value of approx 3 in the pauling scale). This means that it has a very strong tendancy to attract electron. Also Chlorine (Atomic number 17, configuration of electrons 2, 8, 7) has seven electrons in the valence shell so it needs one electron to fill its outer shell . 2. Tests to monitor water safety often report the number of fecal coliform bacteria found in samples. Which of the following statements accurately reflects water safety recommendations based upon fecal coliform levels? Answer : Here by mistake the first two options are exactly same, one of them probably needs to be corrected to If the level of fecal coliform bacteria is low, then the water is safe for drinking and recreational purposes. This option will be the correct option. Explanation: Fecal coliforms are bacteria which indicate that the water might have been exposed to fecal matter. They are an excellant proxy to make sure that the water doesn\'t contain any human pathogens. So if the Fecal coliforms count is low it indicates that the chances of water containing any human pathogen is also low and therefore it can be used for drinking and recreational purposes 3. When an individual has severe diarrhea, as can occur with cholera, rehydration solution with glucose, salt, sodium bicarbonate, and potassium chloride can be administered. Why is it important to use a solution like this rather than simply giving the individual water? Answer: Option 1: Diarrhea causes the loss of electrolytes, not just fluids, and it is important to replace the electrolytes as well. Glucose is transported into intestinal epithelial cells, along with sodium, by symporters. It is included as well because glucose is not sufficiently absorbed while sodium is lacking. Explanation: The answer is self explanatory 4.Vibrio cholerae is a human pathogen that causes cholera. It has an unusual shape distinctive of its genus. Considering that it does not have one of the most common bacterial shapes, what is the shape of this species? Answer Option 2 - Curved rod Explanation:Vibrio\'s unique curved rod shape is also called the \"comma\" shape. Just helps to remember it more easily 5. Legionella pneumophilia can grow in water and is transmitted in aerosols. Which of these has an infection NOT been linked to? Answer option 4 -ocean water 6. On a global scale, the most important waterborne bacterial pathogens are __________. Answer Option 4 -Vibrio cholerae and Salmonella enterica serovar Typhi 7. Food that is heavily salted or candied does not need to be refrigerated. Why not? Answer option 2 -E.

1. Water supplies are treated with chlorine to kill pathogens. Chlor.pdf

singhanubhav1234

1. stub is usually used for temporary substitute for the code that y.pdf

singhanubhav1234

More from singhanubhav1234 (20)

Silica Fume is a very reactive pozzolana because of its chemical and.pdf

Problem 01 #!usrbinperl use strict; use warnings; $_ = .pdf

enzymes active site does not have the exact sha.pdf

MulticastingIt is the communication between a single sender and m.pdf

just moved a new USB 2.0 device from a new system to an older system.pdf

IntroductionFew things are more aggravating to produce on a worksi.pdf

D) Rb Solution D) Rb .pdf

idkSolutionidk.pdf

function [M]=trajectory3(x,y,z,pitcher,roll,yaw,scale_factor,step,se.pdf

Evolution of mitochondria.Mitochondria are believed to have arisen.pdf

DSolutionD.pdf

AnswerRecombinant DNA Technology It is the set of techniques tha.pdf

a. Major categories1. Chromosomal disorders Due to numerical or .pdf

Alcohols are organic molecules that have a very p.pdf

A NEWVIEW OF GRAVITYEntropy and Gravity may be crucial concepts fo.pdf

4. Answer is colloid. follicular cells, C cells are cells in the thy.pdf

256Solution256.pdf

1A) One of the best explanation for why we conformobey in the real .pdf

1. Water supplies are treated with chlorine to kill pathogens. Chlor.pdf

1. stub is usually used for temporary substitute for the code that y.pdf

Recently uploaded

Simple, Complex, and Compound Sentences Exercises.pdf

stareducators107

MuleSoft Integration with AWS Textract | Calling AWS Textract API |AWS - Cloud Native Meetup #4 Event Link:- https://meetups.mulesoft.com/events/details/mulesoft-aws-cloud-native-presents-unveiling-the-heart-of-mulesoft-intelligent-document-processing-aws-textract/ Agenda ● Introduction to Textract ● Document Processing using AWS Textract ● AWS Textract UseCases ● AWS Textract API ● Calling AWS Textract API from Postman ● Demo - Textract Integration with MuleSoft ● QnA ◈ Important Links https://aws.amazon.com/textract/resources/ https://docs.aws.amazon.com/textract/latest/dg/API_AnalyzeDocument.html https://docs.aws.amazon.com/general/latest/gr/textract.html https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_aws-signing.html https://ambassadorpatryk.com/2021/01/discover-how-to-sign-aws-api-request-using-dataweave/ https://github.com/djuang1/awsv4auth-extension For Upcoming Meetups Join AWS - Cloud Native Meetup Group - https://meetups.mulesoft.com/aws-cloud-native/ Youtube:- youtube.com/@mulesoftmysore Mysore WhatsApp group:- https://chat.whatsapp.com/EhqtHtCC75vCAX7gaO842N Speaker:- Shubham Chaurasia - https://www.linkedin.com/in/shubhamchaurasia1/ Priya Shaw - https://www.linkedin.com/in/priya-shaw Organizers:- Shubham Chaurasia - https://www.linkedin.com/in/shubhamchaurasia1/ Robin Sinha - https://www.linkedin.com/in/robin-sinha

MuleSoft Integration with AWS Textract | Calling AWS Textract API |AWS - Clou...

MysoreMuleSoftMeetup

VAMOS CUIDAR DO NOSSO PLANETA! .

Colégio Santa Teresinha

UGC NET Paper 1 Unit 7 DATA INTERPRETATION.pdf

Nirmal Dwivedi

This presentation covers the essential parameters of Unit 2 Operations Processes of the subject Operations & Supply Chain Management. Topics Covered: Volume Variety and Flow. Types of Processes and Operations Systems - Continuous Flow system and intermittent flow systems.Job Production, Batch Production, Assembly line and Continuous Flow, Process and Product Layout. Design of Service Systems, Service Blueprinting.

OSCM Unit 2_Operations Processes & Systems

Sandeep D Chaudhary

When Quality Assurance Meets Innovation in Higher Education - Report launch w...

Gary Wood

How to Add a Tool Tip to a Field in Odoo 17

Celine George

PANDITA RAMABAI- Indian political thought GENDER.pptx

akanksha16arora

Introduction to TechSoup’s Digital Marketing Services and Use Cases

TechSoup

FICTIONAL SALESMAN/SALESMAN SNSW 2024.pdf

Pondicherry University

COMMUNICATING NEGATIVE NEWS - APPROACHES .pptx

annathomasp01

OS-operating systems- ch05 (CPU Scheduling) ...

Dr. Mazin Mohamed alkathiri

Unit 3 Emotional Intelligence and Spiritual Intelligence.pdf

Dr Vijay Vishwakarma

A procedure when multiple vendors are asked to submit proposals for a supply contract or project. It helps businesses to assess offers and select the best vendor based on factors like cost, quality, and other relevant factors. In Odoo 17, the Call for Tenders feature has undergone significant improvements, making procurement process management more efficient and seamless. Accessing and managing this feature can still be done through the same interface as Blanket Orders, with the addition of creating an exclusive agreement type for Call for Tenders.

How to Manage Call for Tendor in Odoo 17

Celine George

TỔNG HỢP HƠN 100 ĐỀ THI THỬ TỐT NGHIỆP THPT TOÁN 2024 - TỪ CÁC TRƯỜNG, TRƯỜNG...

Nguyen Thanh Tu Collection

Wellbeing inclusion and digital dystopias.pptx

Jisc

Observing-Correct-Grammar-in-Making-Definitions.pptx

AdelaideRefugio

diagnosting testing bsc 2nd sem.pptx....

Ritu480198

Personalisation of Education by AI and Big Data - Lourdes Guàrdia

EADTU

Program code examples (known also as worked examples) play a crucial role in learning how to program. Instructors use examples extensively to demonstrate the semantics of the programming language being taught and to highlight the fundamental coding patterns. Programming textbooks allocate considerable space to present and explain code examples. To make the process of studying code examples more interactive, CS education researchers developed a range of tools to engage students in the study of code examples. These tools include codecasts (codemotion,codecast,elicasts), interactive example explorers (WebEx, PCEX), and tutoring systems (DeepTutor). An important component in all types of worked examples is code explanations associated with specific code lines or code chunks of an example. The explanations connect examples with general programming knowledge explaining the role and function of code fragments or their behavior. In textbooks, these explanations are usually presented as comments in the code or as explanations on the margins. The example explorer tools allow students to examine these explanations interactively. Tutoring systems, which engage students in explaining the code, use these model explanations to check student responses and provide scaffolding. In all these cases, to make a worked example re-usable beyond its presentation in a lecture, the explanations have to be authored by instructors or domain experts i.e., produced and integrated into a specific system. As the experience of the last 10 years demonstrated, these explanations are hard to obtain. Those already collected are usually “locked” in a specific example-focused system and can’t be reused. The purpose of this working group is to support broader re-used of worked examples augmented with explanations. Our current plan is to develop а standard approach to represent explained examples. This approach will enable an example created for any of the existing systems to be explored in a standard format and imported into any other example-focused system. We plan to follow a successful experience of the PEML working group focused on re-using programming exercises.

SPLICE Working Group:Reusable Code Examples

Peter Brusilovsky

Recently uploaded (20)

Simple, Complex, and Compound Sentences Exercises.pdf

MuleSoft Integration with AWS Textract | Calling AWS Textract API |AWS - Clou...

VAMOS CUIDAR DO NOSSO PLANETA! .

UGC NET Paper 1 Unit 7 DATA INTERPRETATION.pdf

OSCM Unit 2_Operations Processes & Systems

When Quality Assurance Meets Innovation in Higher Education - Report launch w...

How to Add a Tool Tip to a Field in Odoo 17

PANDITA RAMABAI- Indian political thought GENDER.pptx

Introduction to TechSoup’s Digital Marketing Services and Use Cases

FICTIONAL SALESMAN/SALESMAN SNSW 2024.pdf

COMMUNICATING NEGATIVE NEWS - APPROACHES .pptx

OS-operating systems- ch05 (CPU Scheduling) ...

Unit 3 Emotional Intelligence and Spiritual Intelligence.pdf

How to Manage Call for Tendor in Odoo 17

TỔNG HỢP HƠN 100 ĐỀ THI THỬ TỐT NGHIỆP THPT TOÁN 2024 - TỪ CÁC TRƯỜNG, TRƯỜNG...

Wellbeing inclusion and digital dystopias.pptx

Observing-Correct-Grammar-in-Making-Definitions.pptx

diagnosting testing bsc 2nd sem.pptx....

Personalisation of Education by AI and Big Data - Lourdes Guàrdia

SPLICE Working Group:Reusable Code Examples