enzymes active site does not have the exact sha.pdf
•
0 likes•2 views
enzyme\'s active site does not have the exact shape of substrate, but the substrate brings about or induces a change in the shape of the active site Solution enzyme\'s active site does not have the exact shape of substrate, but the substrate brings about or induces a change in the shape of the active site.
Report
Share
Report
Share
Download to read offline
Recommended
the Zn(OH)2 precipitation reaction equation Zn2.pdf
the Zn(OH)2 precipitation reaction equation: Zn2+ + 2OH- = Zn(OH)2 the
Zn(OH)42- complex formation equation: Zn2+ + 4OH- = Zn(OH)4^2- Precipitate will not
form.
Solution
the Zn(OH)2 precipitation reaction equation: Zn2+ + 2OH- = Zn(OH)2 the
Zn(OH)42- complex formation equation: Zn2+ + 4OH- = Zn(OH)4^2- Precipitate will not
form..
The side facing the SUN will absorb Infra-red rad.pdf
The side facing the SUN will absorb Infra-red radiation from the sun and thus heat
up. If the asteroid is made of heat conductive material, then the heat will transfer through the
asteroid to the other side
Solution
The side facing the SUN will absorb Infra-red radiation from the sun and thus heat
up. If the asteroid is made of heat conductive material, then the heat will transfer through the
asteroid to the other side.
Stereoisomers are isomeric molecules that have th.pdf
Stereoisomers are isomeric molecules that have the same molecular formula and
sequence of bonded atoms (constitution), but that differ only in the three-dimensional
orientations of their atoms in space. This contrasts with structural isomers, which share the same
molecular formula, but the bond connections and/or their order differ(s) between different
atoms/groups. In stereoisomers, the order and bond connections of the constituent atoms remain
the same, but their orientation in space differ. stereo isomers are classifides in to two types
(1)enantiomers (2)diastereomers Enantiomers are two stereoisomers that are related to each other
by a reflection: They are mirror images of each other, which are non-superimposable. Human
hands are a macroscopic example of stereoisomerism. Every stereogenic center in one has the
opposite configuration in the other. Two compounds that are enantiomers of each other have the
same physical properties, except for the direction in which they rotate polarized light and how
they interact with different optical isomers of other compounds. As a result, different
enantiomers of a compound may have substantially different biological effects. Pure enantiomers
also exhibit the phenomenon of optical activity and can be separated only with the use of a chiral
agent. In nature, only one enantiomer of most chiral biological compounds, such as amino acids
(except glycine, which is achiral), is present. Diastereomers are stereoisomers not related through
a reflection operation. They are not mirror images of each other. These include meso
compounds, cis-trans (E-Z) isomers, and non-enantiomeric optical isomers. Diastereomers
seldom have the same physical properties. In the example shown below, the meso form of
tartaric acid forms a diastereomeric pair with both levo and dextro tartaric acids, which form an
enantiomeric pair.
Solution
Stereoisomers are isomeric molecules that have the same molecular formula and
sequence of bonded atoms (constitution), but that differ only in the three-dimensional
orientations of their atoms in space. This contrasts with structural isomers, which share the same
molecular formula, but the bond connections and/or their order differ(s) between different
atoms/groups. In stereoisomers, the order and bond connections of the constituent atoms remain
the same, but their orientation in space differ. stereo isomers are classifides in to two types
(1)enantiomers (2)diastereomers Enantiomers are two stereoisomers that are related to each other
by a reflection: They are mirror images of each other, which are non-superimposable. Human
hands are a macroscopic example of stereoisomerism. Every stereogenic center in one has the
opposite configuration in the other. Two compounds that are enantiomers of each other have the
same physical properties, except for the direction in which they rotate polarized light and how
they interact with different optical isomers of other compounds. As a result, different
enantiomer.
Salt dissolving in water physical or chemical Def.pdf
Salt dissolving in water physical or chemical Definition Salt water - Salt water or
saltwater may refer to: Saline water, water containing dissolved salts; Brine, water saturated or
nearly saturated with salt; Brackish water, water that is saltier ..... Solubility equilibrium -
Solubility equilibrium is any type of chemical equilibrium relationship between solid and
dissolved states of a compound at saturation. Solubility equilibria involve application of
chemical principles and constants to predict solubility of substances under specific conditions
(because solubility is sensitive to the conditions, while the constants are less so). The substance
that is dissolved can be an organic solid such as sugar or an ionic solid such as table salt. The
main difference is that ionic solids dissociate into constituent ions when they dissolve in water.
Most commonly water is the solvent of interest, although the same basic principles apply with
any solvent. In the case of environmental science studies of water quality, the total concentration
of dissolved solids (not necessarily at saturation) is referred to as total dissolved solids.
Dissolution of an organic solid can be described as an equilibrium between the substance in its
solid and dissolved forms:.... Salt water - Saline water, water containing dissolved salts; Brine,
water saturated or nearly saturated with salt; Brackish water, water that is saltier than fresh
water, but not as salty as ..... Ammonium hydrosulfide - Ammonium hydrosulfide is the
chemical compound with the formula (NH 4)SH. It is the salt derived from the ammonium cation
and the hydrosulfide anion. By passing hydrogen sulfide mixed with a slight excess of ammonia
gives the colourless, micaceous crystals. It dissolves readily in water.. Why is the Ocean Salty?
Geography II series, from TMW Media. All water, even rainwater contains dissolved chemicals
which scientists call \'Salts.\' These salts eventually wash down into rivers and streams and
eventually find their way into oceans and seas.Subjects covered include: The origin of the sea.
The sources of salt. The components of sea water. The salinity of the sea and its variability. How
sea life affects sea waters composition. ... Geography Oceans Water Salt Sediments physical
science TMW Media trailer ... Purifying Salt Peter Procedures for purifying chemicals are being
invented and re-invented all the time. Purification depends very much on the chemicals that are
considered the contamination, and their properties compare to the chemical you are trying to
purify. The mixture that you are trying to purify will dictate how easy the purification process
will be. There are no \'one fit all solutions\', and indeed, some chemicals are so hard to purify that
the finished purified product fetch amazing prices. Purifying Potassium Nitrate (KNO3)
Recrystallization is a physical method targeting the purification of compounds. The procedure
involves dissolving a compound in a hot solvent to for.
POH=-log[OH-] =-log(0.005) =2.301 PH=14-2.301=11..pdf
POH=-log[OH-] =-log(0.005) =2.301 PH=14-2.301=11.69
Solution
POH=-log[OH-] =-log(0.005) =2.301 PH=14-2.301=11.69.
Not really. Strontium carbonate can only dissolve.pdf
Not really. Strontium carbonate can only dissolve in water at the rate of about
0.1g/L. However, it dissolves more readily in dilute acids (causing a reaction--strontium
carbonate is a base) and in fully-carbonated wate
Solution
Not really. Strontium carbonate can only dissolve in water at the rate of about
0.1g/L. However, it dissolves more readily in dilute acids (causing a reaction--strontium
carbonate is a base) and in fully-carbonated wate.
Lattice energy increases with charge multiplicity.pdf
Lattice energy increases with charge multiplicity and relative size of ions involved.
For those listed, CaO has 2+/- ions and will therefore have the highest lattice energy. LiI, LiF,
and RbI all have 1+/- ions. The combination of ions that have the smallest separation (assuming
the ions touch, we just add ionic radii for this) will have the highest lattice energy in this
group.....this would be LiF; the combination of ions that have the largest separation will have the
smallest lattice energy ..... this would be RbI. Least negative ...........---> most negative RbI, LiI,
LiF, CaO Ions that exist in ionic solids are surrounded by oppositely charged ions in an orderly
way. Metallic ions by themselves would have have such order to them. Atoms are held together
in different types of solids by different types of bonding forces. For example a network solid like
diamond involves localized covalent bonds between the C atoms where as an ionic solid such as
NaClinvolves the attraction of oppositely charged ions , or Coulombic forces of attraction. (This
answer is not meant to be exhaustive my any means.)
Solution
Lattice energy increases with charge multiplicity and relative size of ions involved.
For those listed, CaO has 2+/- ions and will therefore have the highest lattice energy. LiI, LiF,
and RbI all have 1+/- ions. The combination of ions that have the smallest separation (assuming
the ions touch, we just add ionic radii for this) will have the highest lattice energy in this
group.....this would be LiF; the combination of ions that have the largest separation will have the
smallest lattice energy ..... this would be RbI. Least negative ...........---> most negative RbI, LiI,
LiF, CaO Ions that exist in ionic solids are surrounded by oppositely charged ions in an orderly
way. Metallic ions by themselves would have have such order to them. Atoms are held together
in different types of solids by different types of bonding forces. For example a network solid like
diamond involves localized covalent bonds between the C atoms where as an ionic solid such as
NaClinvolves the attraction of oppositely charged ions , or Coulombic forces of attraction. (This
answer is not meant to be exhaustive my any means.).
Lucas Test uses HCl and ZnCl2, it proceeds via Sn.pdf
Lucas Test uses HCl and ZnCl2, it proceeds via Sn1 mechanism tertiary alcohols
will be the most reactive followed by secondary alcohols. Primary alcohols will not be reactive.
Solution
Lucas Test uses HCl and ZnCl2, it proceeds via Sn1 mechanism tertiary alcohols
will be the most reactive followed by secondary alcohols. Primary alcohols will not be reactive..
Recommended
the Zn(OH)2 precipitation reaction equation Zn2.pdf
the Zn(OH)2 precipitation reaction equation: Zn2+ + 2OH- = Zn(OH)2 the
Zn(OH)42- complex formation equation: Zn2+ + 4OH- = Zn(OH)4^2- Precipitate will not
form.
Solution
the Zn(OH)2 precipitation reaction equation: Zn2+ + 2OH- = Zn(OH)2 the
Zn(OH)42- complex formation equation: Zn2+ + 4OH- = Zn(OH)4^2- Precipitate will not
form..
The side facing the SUN will absorb Infra-red rad.pdf
The side facing the SUN will absorb Infra-red radiation from the sun and thus heat
up. If the asteroid is made of heat conductive material, then the heat will transfer through the
asteroid to the other side
Solution
The side facing the SUN will absorb Infra-red radiation from the sun and thus heat
up. If the asteroid is made of heat conductive material, then the heat will transfer through the
asteroid to the other side.
Stereoisomers are isomeric molecules that have th.pdf
Stereoisomers are isomeric molecules that have the same molecular formula and
sequence of bonded atoms (constitution), but that differ only in the three-dimensional
orientations of their atoms in space. This contrasts with structural isomers, which share the same
molecular formula, but the bond connections and/or their order differ(s) between different
atoms/groups. In stereoisomers, the order and bond connections of the constituent atoms remain
the same, but their orientation in space differ. stereo isomers are classifides in to two types
(1)enantiomers (2)diastereomers Enantiomers are two stereoisomers that are related to each other
by a reflection: They are mirror images of each other, which are non-superimposable. Human
hands are a macroscopic example of stereoisomerism. Every stereogenic center in one has the
opposite configuration in the other. Two compounds that are enantiomers of each other have the
same physical properties, except for the direction in which they rotate polarized light and how
they interact with different optical isomers of other compounds. As a result, different
enantiomers of a compound may have substantially different biological effects. Pure enantiomers
also exhibit the phenomenon of optical activity and can be separated only with the use of a chiral
agent. In nature, only one enantiomer of most chiral biological compounds, such as amino acids
(except glycine, which is achiral), is present. Diastereomers are stereoisomers not related through
a reflection operation. They are not mirror images of each other. These include meso
compounds, cis-trans (E-Z) isomers, and non-enantiomeric optical isomers. Diastereomers
seldom have the same physical properties. In the example shown below, the meso form of
tartaric acid forms a diastereomeric pair with both levo and dextro tartaric acids, which form an
enantiomeric pair.
Solution
Stereoisomers are isomeric molecules that have the same molecular formula and
sequence of bonded atoms (constitution), but that differ only in the three-dimensional
orientations of their atoms in space. This contrasts with structural isomers, which share the same
molecular formula, but the bond connections and/or their order differ(s) between different
atoms/groups. In stereoisomers, the order and bond connections of the constituent atoms remain
the same, but their orientation in space differ. stereo isomers are classifides in to two types
(1)enantiomers (2)diastereomers Enantiomers are two stereoisomers that are related to each other
by a reflection: They are mirror images of each other, which are non-superimposable. Human
hands are a macroscopic example of stereoisomerism. Every stereogenic center in one has the
opposite configuration in the other. Two compounds that are enantiomers of each other have the
same physical properties, except for the direction in which they rotate polarized light and how
they interact with different optical isomers of other compounds. As a result, different
enantiomer.
Salt dissolving in water physical or chemical Def.pdf
Salt dissolving in water physical or chemical Definition Salt water - Salt water or
saltwater may refer to: Saline water, water containing dissolved salts; Brine, water saturated or
nearly saturated with salt; Brackish water, water that is saltier ..... Solubility equilibrium -
Solubility equilibrium is any type of chemical equilibrium relationship between solid and
dissolved states of a compound at saturation. Solubility equilibria involve application of
chemical principles and constants to predict solubility of substances under specific conditions
(because solubility is sensitive to the conditions, while the constants are less so). The substance
that is dissolved can be an organic solid such as sugar or an ionic solid such as table salt. The
main difference is that ionic solids dissociate into constituent ions when they dissolve in water.
Most commonly water is the solvent of interest, although the same basic principles apply with
any solvent. In the case of environmental science studies of water quality, the total concentration
of dissolved solids (not necessarily at saturation) is referred to as total dissolved solids.
Dissolution of an organic solid can be described as an equilibrium between the substance in its
solid and dissolved forms:.... Salt water - Saline water, water containing dissolved salts; Brine,
water saturated or nearly saturated with salt; Brackish water, water that is saltier than fresh
water, but not as salty as ..... Ammonium hydrosulfide - Ammonium hydrosulfide is the
chemical compound with the formula (NH 4)SH. It is the salt derived from the ammonium cation
and the hydrosulfide anion. By passing hydrogen sulfide mixed with a slight excess of ammonia
gives the colourless, micaceous crystals. It dissolves readily in water.. Why is the Ocean Salty?
Geography II series, from TMW Media. All water, even rainwater contains dissolved chemicals
which scientists call \'Salts.\' These salts eventually wash down into rivers and streams and
eventually find their way into oceans and seas.Subjects covered include: The origin of the sea.
The sources of salt. The components of sea water. The salinity of the sea and its variability. How
sea life affects sea waters composition. ... Geography Oceans Water Salt Sediments physical
science TMW Media trailer ... Purifying Salt Peter Procedures for purifying chemicals are being
invented and re-invented all the time. Purification depends very much on the chemicals that are
considered the contamination, and their properties compare to the chemical you are trying to
purify. The mixture that you are trying to purify will dictate how easy the purification process
will be. There are no \'one fit all solutions\', and indeed, some chemicals are so hard to purify that
the finished purified product fetch amazing prices. Purifying Potassium Nitrate (KNO3)
Recrystallization is a physical method targeting the purification of compounds. The procedure
involves dissolving a compound in a hot solvent to for.
POH=-log[OH-] =-log(0.005) =2.301 PH=14-2.301=11..pdf
POH=-log[OH-] =-log(0.005) =2.301 PH=14-2.301=11.69
Solution
POH=-log[OH-] =-log(0.005) =2.301 PH=14-2.301=11.69.
Not really. Strontium carbonate can only dissolve.pdf
Not really. Strontium carbonate can only dissolve in water at the rate of about
0.1g/L. However, it dissolves more readily in dilute acids (causing a reaction--strontium
carbonate is a base) and in fully-carbonated wate
Solution
Not really. Strontium carbonate can only dissolve in water at the rate of about
0.1g/L. However, it dissolves more readily in dilute acids (causing a reaction--strontium
carbonate is a base) and in fully-carbonated wate.
Lattice energy increases with charge multiplicity.pdf
Lattice energy increases with charge multiplicity and relative size of ions involved.
For those listed, CaO has 2+/- ions and will therefore have the highest lattice energy. LiI, LiF,
and RbI all have 1+/- ions. The combination of ions that have the smallest separation (assuming
the ions touch, we just add ionic radii for this) will have the highest lattice energy in this
group.....this would be LiF; the combination of ions that have the largest separation will have the
smallest lattice energy ..... this would be RbI. Least negative ...........---> most negative RbI, LiI,
LiF, CaO Ions that exist in ionic solids are surrounded by oppositely charged ions in an orderly
way. Metallic ions by themselves would have have such order to them. Atoms are held together
in different types of solids by different types of bonding forces. For example a network solid like
diamond involves localized covalent bonds between the C atoms where as an ionic solid such as
NaClinvolves the attraction of oppositely charged ions , or Coulombic forces of attraction. (This
answer is not meant to be exhaustive my any means.)
Solution
Lattice energy increases with charge multiplicity and relative size of ions involved.
For those listed, CaO has 2+/- ions and will therefore have the highest lattice energy. LiI, LiF,
and RbI all have 1+/- ions. The combination of ions that have the smallest separation (assuming
the ions touch, we just add ionic radii for this) will have the highest lattice energy in this
group.....this would be LiF; the combination of ions that have the largest separation will have the
smallest lattice energy ..... this would be RbI. Least negative ...........---> most negative RbI, LiI,
LiF, CaO Ions that exist in ionic solids are surrounded by oppositely charged ions in an orderly
way. Metallic ions by themselves would have have such order to them. Atoms are held together
in different types of solids by different types of bonding forces. For example a network solid like
diamond involves localized covalent bonds between the C atoms where as an ionic solid such as
NaClinvolves the attraction of oppositely charged ions , or Coulombic forces of attraction. (This
answer is not meant to be exhaustive my any means.).
Lucas Test uses HCl and ZnCl2, it proceeds via Sn.pdf
Lucas Test uses HCl and ZnCl2, it proceeds via Sn1 mechanism tertiary alcohols
will be the most reactive followed by secondary alcohols. Primary alcohols will not be reactive.
Solution
Lucas Test uses HCl and ZnCl2, it proceeds via Sn1 mechanism tertiary alcohols
will be the most reactive followed by secondary alcohols. Primary alcohols will not be reactive..
The answer isD. they are significantly higher than the boiling po.pdf
The answer is:
D. they are significantly higher than the boiling points of other compounds
This is due to the stronger hydrogen bonding present
Solution
The answer is:
D. they are significantly higher than the boiling points of other compounds
This is due to the stronger hydrogen bonding present.
Silica Fume is a very reactive pozzolana because of its chemical and.pdf
Silica Fume is a very reactive pozzolana because of its chemical and physical properties.
Pozzolona reacts with the Calcium Hydroxide which is by product of the hydration reaction to
form compounds having cementitious properties. Hence when silica fume is not used, the
calcium hydroxide (Formed after hydration reaction) remains as it is which does not have any
cementitious properties. By adding Silica fume, calcium hydorxide is converted to cementitious
products.
Solution
Silica Fume is a very reactive pozzolana because of its chemical and physical properties.
Pozzolona reacts with the Calcium Hydroxide which is by product of the hydration reaction to
form compounds having cementitious properties. Hence when silica fume is not used, the
calcium hydroxide (Formed after hydration reaction) remains as it is which does not have any
cementitious properties. By adding Silica fume, calcium hydorxide is converted to cementitious
products..
Problem 01 #!usrbinperl use strict; use warnings; $_ = .pdf
Problem 01:
#!/usr/bin/perl
use strict;
use warnings;
$_ = \"Let’s rent a bus!\";
s/(.)(\\w).*(\\2).*(.)$/$1$2$3$4/ ;
print \"[\" ; print ; print \"]\";
exit;
output : [Lee!]
Solution
Problem 01:
#!/usr/bin/perl
use strict;
use warnings;
$_ = \"Let’s rent a bus!\";
s/(.)(\\w).*(\\2).*(.)$/$1$2$3$4/ ;
print \"[\" ; print ; print \"]\";
exit;
output : [Lee!].
MulticastingIt is the communication between a single sender and m.pdf
Multicasting:
It is the communication between a single sender and multiple receivers on a network. Typical
uses include the updating of mobile workers from a home office and the episodic issuance of
online newsletters
IGMP works as:
Internet Group Management Protocol is allows a host to promote its multicast group membership
to adjacent switches and routers. IGMP is used by the TCP/IP protocol set to achieve dynamic
multicasting
When a multicast transmission initiates the software creates a multicast group. This multicast
group address consists of an IP address by the first octet in the range 224 – 239 and is particular
in the IP packet as the end address for this traffic. The host initiate the transmission send a
message to the 224.0.0.2 address specify the multicast group address. And the switch receives
this message and adds the multicast group to its table and adds the receiving port as a member of
the group.
PIM works as:
The PIM protocol can be configured to work on IPv4 and IPv6 networks.
Multicast protocols are used to carry multicast packets from one source to multiple receivers.
They ease better bandwidth use and use less host and router processing and ideal for usage in
applications such as video and audio. PIM is a usually used multicast routing protocol.
SDN:
Software Defined Networking is an upcoming architecture that is dynamic, manageable and
adaptable of making it perfect for the dynamic nature of today\'s applications.
Open Flow:
Open Flow is enable for researchers to run experimental protocols in the campus networks we
use every day. Open Flow is added as a feature to saleable Ethernet switches, routers and
wireless access points and provide a regular hook to allow researchers to run experiments
without require vendors to expose the inner workings of their network devices.
Solution
Multicasting:
It is the communication between a single sender and multiple receivers on a network. Typical
uses include the updating of mobile workers from a home office and the episodic issuance of
online newsletters
IGMP works as:
Internet Group Management Protocol is allows a host to promote its multicast group membership
to adjacent switches and routers. IGMP is used by the TCP/IP protocol set to achieve dynamic
multicasting
When a multicast transmission initiates the software creates a multicast group. This multicast
group address consists of an IP address by the first octet in the range 224 – 239 and is particular
in the IP packet as the end address for this traffic. The host initiate the transmission send a
message to the 224.0.0.2 address specify the multicast group address. And the switch receives
this message and adds the multicast group to its table and adds the receiving port as a member of
the group.
PIM works as:
The PIM protocol can be configured to work on IPv4 and IPv6 networks.
Multicast protocols are used to carry multicast packets from one source to multiple receivers.
They ease better bandwidth use and use less host and route.
just moved a new USB 2.0 device from a new system to an older system.pdf
just moved a new USB 2.0 device from a new system to an older system. The new device
worked properly on the new system but doesn’t install properly on the older system. All other
USB devices work properly on the older system.
C. The old system’s BIOS is out-of-date and needs to be upgraded.
Solution
just moved a new USB 2.0 device from a new system to an older system. The new device
worked properly on the new system but doesn’t install properly on the older system. All other
USB devices work properly on the older system.
C. The old system’s BIOS is out-of-date and needs to be upgraded..
IntroductionFew things are more aggravating to produce on a worksi.pdf
Introduction
Few things are more aggravating to produce on a worksite than concrete. Bags of cement, sand,
aggregate (gravel) and possibly other additives must be delivered to the construction area. A
supply of clean water is also necessary, along with a rented concrete mixing hopper. Even after
all the dusty and heavy ingredients have been loaded into the hopper, one small error in the
wet/dry ratio can render an entire batch of concrete unusable. One common solution to this
messy and time-consuming problem is “READY MIX CONCRETE”.
Ready-mix concrete (RMC) is a ready-to-use material, with predetermined mixture of cement,
sand, aggregates and water. RMC is a type of concrete manufactured in a factory according to a
set recipe or as per specifications of the customer, at a centrally located batching plant.
It is delivered to a worksite, often in truck mixers capable of mixing the ingredients of the
concrete en route or just before delivery of the batch. This results in a precise mixture, allowing
specialty concrete mixtures to be developed and implemented on construction sites. The second
option available is to mix the concrete at the batching plant and deliver the mixed concrete to the
site in an agitator truck, which keeps the mixed concrete in correct form.
In the case of the centrally mixed type, the drum carrying the concrete revolves slowly so as to
prevent the mixed concrete from \"segregation\" and prevent its stiffening due to initial set.
However, in the case of the truck-mixed concrete, the batched materials (sand, gravel and
cement) are carried and water is added just at the time of mixing. In this case the cement remains
in contact with the wet or moist material and this phase cannot exceed the permissible period,
which is normally 90 minutes.
The use of the RMC is facilitated through a truck-mounted \'boom placer\' that can pump the
product for ready use at multi-storied construction sites. A boom placer can pump the concrete
up 80 meters.
Objective -
Manufacturing process of ready mix concrete.
Procedure –
Materials required for RMC –
Admixture: A substance added to the basic concrete mixture to alter one or more properties of
the concrete; i.e. fibrous materials for reinforcing, water repellent treatments, and coloring
compounds.
Aggregate: Inert particles (i.e. gravel, sand, and stone) added to cement and water to form
concrete.
Cement: Dry powder that reacts chemically with water to bind the particles of aggregate,
forming concrete. Portland cement is typically used in concrete production.
Fly ash: Fly ash is a by-product from coal-fired electricity generating power plants. The coal
used in these power plants is mainly composed of combustible elements such as carbon,
hydrogen and oxygen (nitrogen and sulfur being minor elements), and non-combustible
impurities (10 to 40%) usually present in the form of clay, shale, quartz, feldspar and limestone.
As the coal travels through the high-temperature zone in the furnace, the combus.
function [M]=trajectory3(x,y,z,pitcher,roll,yaw,scale_factor,step,se.pdf
function [M]=trajectory3(x,y,z,pitcher,roll,yaw,scale_factor,step,selector,varargin);
% operate trajectory2(x,y,z,pitcher,roll,yaw,scale_factor,step,[selector,SoR])
%
%
% x,y,z center mechanical phenomenon (vector) [m]
%
% pitcher,roll,yaw euler\'s angles [rad]
%
% issue|multiplier|multiplier factor} standardisation factor [scalar]
% (related to body craft dimension)
%
% step angle sampling issue [scalar]
% (the points variety between 2 body models)
%
% chooseor select the body model [string]
%
% gripen JAS thirty-nine Gripen heli chopper
% mig Mig ah64 Apache chopper
% Felis catus Tomcat(Default) a10
% jet Generic jet cessna Cessna
% 747 Boeing 747 airplane Generic airplane
% md90 MD90 jet shuttle space vehicle
% dc10 DC-10 jet
%
% elective INPUT:
%
%
% read sets the camera read. Use Matlab\'s \"viewer\" as argument to reprocess this
read.
%
% Note:
%
% Refernce System:
% X body- The axial force on the X body axis is
% positive on forward; the momentum around X body
% is positive roll clockwise as viewered from behind;
% Y body- The facet force on the Y body axis is
% positive on the correct wing; the instant around Y
% body is positive in pitcher up;
% Z body- the conventional force on the Z body axis is
% positive down; the instant around Z body is positive
% roll clockwise as viewered from higher than.
%
% *******************************
% operate Version three.0
% 7/08/2004 (dd/mm/yyyy)
% Valerio Scordamaglia
% v.scordamaglia@tiscali.it
% *******************************
if nargin<9
disp(\' Wrong:\');
disp(\' Wrong: Invalid variety Inputs!\');
M=0;
return;
end
if (len(x)~=len(y))|(len(x)~=len(z))|(len(y)~=len(z))
disp(\' Wrong:\');
disp(\' Uncorrect Dimension of the middle mechanical phenomenon Vectors. Please Check
the size\');
M=0;
return;
end
if ((len(pitcher)~=len(roll))||(len(pitcher)~=len(yaw))||(len(roll)~=len(yaw)))
disp(\' Wrong:\');
disp(\' Uncorrect Dimension of the euler\'\'s angle Vectors. Please Check the size\');
M=0;
return;
end
if len(pitcher)~=len(x)
disp(\' Wrong:\');
disp(\' Size match between euler\'\'s angle vectors and center mechanical phenomenon
vectors\');
M=0;
return
end
if step>=len(x)
disp(\' Wrong:\');
disp(\' angle samplig reckon of vary. scale back step\');
M=0;
return
end
if step<1
step=1;
end
if nargin==10
theViewer=cell2mat(varargin(1));
end
if nargin>10
disp(\'Too several inputs arguments\');
M=0;
return
end
if nargin<10
theViewer=[82.50 2];
end
mov=nargout;
cur_dir=pwd;
if strcmp(selector,\'shuttle\')
load shuttle;
V=[-V(:,2) V(:,1) V(:,3)];
V(:,1)=V(:,1)-round(sum(V(:,1))/size(V,1));
V(:,2)=V(:,2)-round(sum(V(:,2))/size(V,1));
V(:,3)=V(:,3)-round(sum(V(:,3))/size(V,1));
elseif strcmp(selector,\'helicopter\')
load helicopter;
V=[-V(:,2) V(:,1) V(:,3)];
V(:,1)=V(:,1)-round(sum(V(:,1))/size(V,1));
V(:,2)=V(:,2)-round(sum(V(:,2))/size(V,1));
V(:,3)=V(:,3)-round(sum(V(:,3))/size(V,1));
elseif strcmp(selector,\'747\')
load boeing_747;
V=[V(:,2) V(:,1) V(:,3)];
V(:,1)=V(:,1)-round(sum(V(:,1))/size(V,1));
V(:.
Evolution of mitochondria.Mitochondria are believed to have arisen.pdf
Evolution of mitochondria.
Mitochondria are believed to have arisen as prokaryotic cells that got entrapped within a
eukaryotic cell. This event is believed to have occurred 1.4 billion years ago. This theory is the
Endosymbiotic theory of the origin of mitochondria. It states that mitochondria were probably
evolved from specialized bacteria which through the phenomenon of endocytosis were
incorporated in to the cytoplasm of an eukaryote. There is no experimental evidence for the
above theory but circumstantial evidence has been put forward by researchers. They are.,
Solution
Evolution of mitochondria.
Mitochondria are believed to have arisen as prokaryotic cells that got entrapped within a
eukaryotic cell. This event is believed to have occurred 1.4 billion years ago. This theory is the
Endosymbiotic theory of the origin of mitochondria. It states that mitochondria were probably
evolved from specialized bacteria which through the phenomenon of endocytosis were
incorporated in to the cytoplasm of an eukaryote. There is no experimental evidence for the
above theory but circumstantial evidence has been put forward by researchers. They are.,.
AnswerRecombinant DNA Technology It is the set of techniques tha.pdf
Answer:
Recombinant DNA Technology: It is the set of techniques that enables the DNA from different
sources to be identified, isolated, and recombined so that new characterstics can be introduced
into an organism. One of the main techniques in recombinant DNA technology is DNA cloning.
The DNA cloning produces an unlimited number of copies of a particular DNA segment (from a
single ancestral DNA molecule). The Recombinant DNA Technology was engineered by Stanley
Norman Cohen and Herbert Boyer in 1973.
The cell based DNA cloning involve following 4 steps:
1) Construction of recombinant DNA molecule: The hybrid DNA molecules are constructed by
in-vitro covalant attachment (ligation) of the desired DNA fragments to a replicon.
2) Transformation: The recombinant DNA molecules are transferred into host cells, in which the
chosen replicon can undergo DNA replication.
3) Selective propogation of cell clones: The targeted cells were propogated in the selective liquid
medium.
4) Isolation of recombinant DNA clones: The recombinant DNA clones are selectively isolated.
* The enzymes used in the recombinant DNA technology are basically of 4 types:
DNA polymerase, Nucleases, Restriction Enzymes, Isoschizomers
Restriction enzymes: Most naturally occuring DNA molecules are much larger than can be
readily analysed in the lab. To study individual gene and individual site on DNA, the large DNA
molecules must be broken into small (managable) fragments. This could be done using
restriction enzymes. The restriction enzymes are bacterial enzymess that able to cut double-
stranded DNA molecules (by cleaving the phosphodiester bonds) at a specific nucleotide
sequence, called a restriction site. The term restriction comes from the fact that these enzymes
restrict the entry of foreign DNA in the bacteria. There are some enzymes that cut a three base
pair sequence while others can cut four, six, and even eight base pair target sequence in a DNA
molecule, usually palindromic.
The naturally occurring restriction endonucleases are categorized into four groups (Types I, II
III, and IV) based on their composition and enzyme cofactor requirements, the nature of their
target sequence, and the position of their DNA cleavage site relative to the target sequence.
For example: the one widely used restriction enzyme, EcoRI, named because it was found in
certain strain of Escherichia coli and was the first (I) such enzyme found in that species.
Plasmids: Plasmid are naturally occuring cicular, extrachromosomal, autonomously replicating
DNA, present in many prokaryotic and few eukaryotic organisms. These are range in size from 1
Kbp to over 300 Kbp. The cloning vectors, replicating genetic element used to carry a fragment
of target DNA into a host cell for the purpose of cloning. The important features of a plasmid are
as follows:
Solution
Answer:
Recombinant DNA Technology: It is the set of techniques that enables the DNA from different
sources to be identified, isolated, and recom.
a. Major categories1. Chromosomal disorders Due to numerical or .pdf
a. Major categories:
1. Chromosomal disorders: Due to numerical or physical abnormality at the chromosome level.
2. Monogenic disorders: Due to mutation in single gene
3. Complex/Multifactorial disorders: Due to mutation in one or more than one genes together
with extrinsic factors.
Some genetic diseases are called as complex or multifactirial because they are caused due the
combined effect of more than one factors (gene mutation along with environmental factors) and
therefore they are complex un nature. For example if there is mutation in TGFA gene in a
pregnant mother and sge is also exposed to smoking, she will have a significant risk of having
cleft lip/palate in her child. Any of the two factor alone is not sufficient to cause disaese.
b. According CDC, the leading causes of death are 1.heart attacks followed by 2, cancers,
3.respiratory diseases, 4.accidents, 5.stroke, 6.Alzheimer\'s disease, 7.diabetes,
8.influenza/pneumonia, 9.nephritis/nephrotic syndrome/nephrosis and 10.suicide. Of these
1,2,3,5,6, and 7 have genetic sysceptibility and comes under complex/multifactorial disorders. 3
and 8 are infectious diseases.
c. The above disease frequency ranking applies to USA, whereas in Newyork 5th is slightly
higher than 4th.
In World heart attack is at the top followed by respiratory diseases, HIV and cancers. Cancer is
higher in USA as compared to many other parts of the world may be due to higher incidence of
smoking, fast food and industrialization.
Solution
a. Major categories:
1. Chromosomal disorders: Due to numerical or physical abnormality at the chromosome level.
2. Monogenic disorders: Due to mutation in single gene
3. Complex/Multifactorial disorders: Due to mutation in one or more than one genes together
with extrinsic factors.
Some genetic diseases are called as complex or multifactirial because they are caused due the
combined effect of more than one factors (gene mutation along with environmental factors) and
therefore they are complex un nature. For example if there is mutation in TGFA gene in a
pregnant mother and sge is also exposed to smoking, she will have a significant risk of having
cleft lip/palate in her child. Any of the two factor alone is not sufficient to cause disaese.
b. According CDC, the leading causes of death are 1.heart attacks followed by 2, cancers,
3.respiratory diseases, 4.accidents, 5.stroke, 6.Alzheimer\'s disease, 7.diabetes,
8.influenza/pneumonia, 9.nephritis/nephrotic syndrome/nephrosis and 10.suicide. Of these
1,2,3,5,6, and 7 have genetic sysceptibility and comes under complex/multifactorial disorders. 3
and 8 are infectious diseases.
c. The above disease frequency ranking applies to USA, whereas in Newyork 5th is slightly
higher than 4th.
In World heart attack is at the top followed by respiratory diseases, HIV and cancers. Cancer is
higher in USA as compared to many other parts of the world may be due to higher incidence of
smoking, fast food and industrialization..
Alcohols are organic molecules that have a very p.pdf
Alcohols are organic molecules that have a very polar -OH unit somewhere. That\'s
the soluble part, or the \"Like\" part that interacts with water. For instance methanol (CH3OH)
or ethanol (CH3CH2OH) are infinitely soluble in water or miscible with water. As the organic
molecule gets bigger, e.g., (CH3CH2CH2CH2CH2CH2CH2CH2CH2-OH) then the interactions
of the other part of the molecule, or the nonpolar part of the molecule become very significant.
Since these types of interactions are mostly dispersive in nature, water has a harder time
disrupting those interactions to cause the solvation process to proceed.
Solution
Alcohols are organic molecules that have a very polar -OH unit somewhere. That\'s
the soluble part, or the \"Like\" part that interacts with water. For instance methanol (CH3OH)
or ethanol (CH3CH2OH) are infinitely soluble in water or miscible with water. As the organic
molecule gets bigger, e.g., (CH3CH2CH2CH2CH2CH2CH2CH2CH2-OH) then the interactions
of the other part of the molecule, or the nonpolar part of the molecule become very significant.
Since these types of interactions are mostly dispersive in nature, water has a harder time
disrupting those interactions to cause the solvation process to proceed..
A NEWVIEW OF GRAVITYEntropy and Gravity may be crucial concepts fo.pdf
A NEWVIEW OF GRAVITY
Entropy and Gravity may be crucial concepts for explaining roots of familiar force.
Gravity may be defined as masses attract each other. To scholars you could explain that space-
time is warped by mass Or that without gravity, the laws of physics would differ for people
moving at changing velocities.
Such a simple question, has defied a direct answer for centuries. A flurry of recent papers have
examined this new idea, which mixes principles from string theory and black hole physics with
basic old-fashioned thermodynamics.
Nobody has expressed the gravity-as-entropy except theorist Erik Verlinde of the University of
Amsterdam in an online paper(arXiv.org/abs/1001.0785v1). His recipe replicates Newton\'s law
of gravitational attraction, and then with some additional mathematical seasoning he arrives at
Einstein\'s general relativity, the modern and undefeated champion of gravity theories.
Verlinde\'s analysis indicates that gravity emerges from physical dynamics analogous to basic
thermodynamic processes. \"Using only … concepts like energy, entropy and temperature,\" he
writes, \"Newton\'s laws appear naturally and practically unavoidably.\"
some extending Verlinde\'s idea to encompass the history of the universe. Rapid expansion just
after the Big Bang and the more recent accelerating expansion of the universe might all fit into
the entropic-gravity picture of reality.
Entropy means \"disorder,\" with a tendency for higher entropy taken to mean that things like to
get messier any system not resupplied with useful energy reaches equilibrium, and entropy is
maximized. More technically, it is a measure of how likely a system is to be in its particular
configuration. Low entropy describes systems with a very improbable arrangement of their parts.
Curiously, the equations relating entropy to probability are precisely the same as the math used
by computer scientists to quantify information. As the molecules spread out, information about
their location diminishes and entropy rises.
Such loss of information--or increasing entropy--drives many natural processes, such as osmosis,
the mysterious migration of water across a membrane.
In 1995, Ted Jacobson of the University of Maryland demonstrated that the equations of
Einstein\'s general theory of relativity could be derived from basic thermodynamic principles,
who discovered parallels between ordinary thermodynamics and the physics of black holes.
Bekenstein showed that a black hole has entropy, determined by all the matter and energy it has
swallowed. Hawking demonstrated that black holes have a temperature. Since black holes are
basically nothing more than pure gravity.
In 1993 Dutch Nobel physics laureate Gerard \'t Hooft. proposed that reality shares common
features with holograms, like the flashy images embedded in credit cards that store apparently
three-dimensional information on a flat surface. In a similar way, \'t Hooft asserted, information
about the contents in three-d.
4. Answer is colloid. follicular cells, C cells are cells in the thy.pdf
4. Answer is colloid. follicular cells, C cells are cells in the thyroid. Calcitonin and parathyroid
hormone are synthesised by the thyroid.
5. Answer T3 and T4. the hypothalamus senses the levels of the two homones and when their
circulation is low releases the thyrotropic releasing hormone which stimulates the pituitary to
release TSH.
6. The androgen is the male sex hormone produced in the testes.
7. ACTH is a peptide hormone
Solution
4. Answer is colloid. follicular cells, C cells are cells in the thyroid. Calcitonin and parathyroid
hormone are synthesised by the thyroid.
5. Answer T3 and T4. the hypothalamus senses the levels of the two homones and when their
circulation is low releases the thyrotropic releasing hormone which stimulates the pituitary to
release TSH.
6. The androgen is the male sex hormone produced in the testes.
7. ACTH is a peptide hormone.
1A) One of the best explanation for why we conformobey in the real .pdf
1A) One of the best explanation for why we conform/obey in the real world is, generally people
are concerned over the thinking of other people. They tend to behave in such manner that they
can correlate with others in properties like behaviors, belief, attitudes and feelings.
1B) Participants obey the researcher is also based on the above explanations. The participants
obey because the researchers have more knowledge and information than them and the other fact
is the participants have to be in norms of research, institute or centre. So they have to obey
researchers.
2A) No; such obedience is not always beneficial. There are many examples where pupils are
tending to obey the researcher in such a way that they can even forget the ethical rules. Obeying
societal norms and expectations sometimes create disturbing behavior. Society is made of people
so the welfare of people will create welfare society.
2B) Deviant behavior is the behavior which denies the societal norms and expectations. They are
not harmful always. The criminal mind from deviant behavior can be created if it is from
abnormal, inappropriate or dysfunctional mental processes. This is relied to individual’s
personality.
Solution
1A) One of the best explanation for why we conform/obey in the real world is, generally people
are concerned over the thinking of other people. They tend to behave in such manner that they
can correlate with others in properties like behaviors, belief, attitudes and feelings.
1B) Participants obey the researcher is also based on the above explanations. The participants
obey because the researchers have more knowledge and information than them and the other fact
is the participants have to be in norms of research, institute or centre. So they have to obey
researchers.
2A) No; such obedience is not always beneficial. There are many examples where pupils are
tending to obey the researcher in such a way that they can even forget the ethical rules. Obeying
societal norms and expectations sometimes create disturbing behavior. Society is made of people
so the welfare of people will create welfare society.
2B) Deviant behavior is the behavior which denies the societal norms and expectations. They are
not harmful always. The criminal mind from deviant behavior can be created if it is from
abnormal, inappropriate or dysfunctional mental processes. This is relied to individual’s
personality..
1. Water supplies are treated with chlorine to kill pathogens. Chlor.pdf
1. Water supplies are treated with chlorine to kill pathogens. Chlorine reacts well with many
other chemicals because it is a strong oxidant. What does this mean?
Answer: Option 4 Because chlorine is strongly electronegative and needs one electron to fill its
outer shell, it strongly pulls electrons from other substances.
Explanation: Chlorine is known to be one of the most electronegative atoms of the periodic table
( with a value of approx 3 in the pauling scale). This means that it has a very strong tendancy to
attract electron. Also Chlorine (Atomic number 17, configuration of electrons 2, 8, 7) has seven
electrons in the valence shell so it needs one electron to fill its outer shell .
2. Tests to monitor water safety often report the number of fecal coliform bacteria found in
samples. Which of the following statements accurately reflects water safety recommendations
based upon fecal coliform levels?
Answer : Here by mistake the first two options are exactly same, one of them probably needs to
be corrected to
If the level of fecal coliform bacteria is low, then the water is safe for drinking and recreational
purposes.
This option will be the correct option.
Explanation: Fecal coliforms are bacteria which indicate that the water might have been exposed
to fecal matter. They are an excellant proxy to make sure that the water doesn\'t contain any
human pathogens. So if the Fecal coliforms count is low it indicates that the chances of water
containing any human pathogen is also low and therefore it can be used for drinking and
recreational purposes
3. When an individual has severe diarrhea, as can occur with cholera, rehydration solution with
glucose, salt, sodium bicarbonate, and potassium chloride can be administered. Why is it
important to use a solution like this rather than simply giving the individual water?
Answer: Option 1: Diarrhea causes the loss of electrolytes, not just fluids, and it is important to
replace the electrolytes as well. Glucose is transported into intestinal epithelial cells, along with
sodium, by symporters. It is included as well because glucose is not sufficiently absorbed while
sodium is lacking.
Explanation: The answer is self explanatory
4.Vibrio cholerae is a human pathogen that causes cholera. It has an unusual shape distinctive of
its genus. Considering that it does not have one of the most common bacterial shapes, what is the
shape of this species?
Answer Option 2 - Curved rod
Explanation:Vibrio\'s unique curved rod shape is also called the \"comma\" shape. Just helps to
remember it more easily
5. Legionella pneumophilia can grow in water and is transmitted in aerosols. Which of these has
an infection NOT been linked to?
Answer option 4 -ocean water
6. On a global scale, the most important waterborne bacterial pathogens are __________.
Answer Option 4 -Vibrio cholerae and Salmonella enterica serovar Typhi
7. Food that is heavily salted or candied does not need to be refrigerated. Why not?
Answer option 2 -E.
1. stub is usually used for temporary substitute for the code that y.pdf
1. stub is usually used for temporary substitute for the code that yet to be written.
2. it removes the last entry in the array.
Solution
1. stub is usually used for temporary substitute for the code that yet to be written.
2. it removes the last entry in the array..
Supporting (UKRI) OA monographs at Salford.pptx
How libraries can support authors with open access requirements for UKRI funded books
Wednesday 22 May 2024, 14:00-15:00.
BÀI TẬP BỔ TRỢ TIẾNG ANH GLOBAL SUCCESS LỚP 3 - CẢ NĂM (CÓ FILE NGHE VÀ ĐÁP Á...
BÀI TẬP BỔ TRỢ TIẾNG ANH GLOBAL SUCCESS LỚP 3 - CẢ NĂM (CÓ FILE NGHE VÀ ĐÁP Á...Nguyen Thanh Tu Collection
https://app.box.com/s/hqnndn05v4q5a4k4jd597rkdbda0fniiMore Related Content
More from singhanubhav1234
The answer isD. they are significantly higher than the boiling po.pdf
The answer is:
D. they are significantly higher than the boiling points of other compounds
This is due to the stronger hydrogen bonding present
Solution
The answer is:
D. they are significantly higher than the boiling points of other compounds
This is due to the stronger hydrogen bonding present.
Silica Fume is a very reactive pozzolana because of its chemical and.pdf
Silica Fume is a very reactive pozzolana because of its chemical and physical properties.
Pozzolona reacts with the Calcium Hydroxide which is by product of the hydration reaction to
form compounds having cementitious properties. Hence when silica fume is not used, the
calcium hydroxide (Formed after hydration reaction) remains as it is which does not have any
cementitious properties. By adding Silica fume, calcium hydorxide is converted to cementitious
products.
Solution
Silica Fume is a very reactive pozzolana because of its chemical and physical properties.
Pozzolona reacts with the Calcium Hydroxide which is by product of the hydration reaction to
form compounds having cementitious properties. Hence when silica fume is not used, the
calcium hydroxide (Formed after hydration reaction) remains as it is which does not have any
cementitious properties. By adding Silica fume, calcium hydorxide is converted to cementitious
products..
Problem 01 #!usrbinperl use strict; use warnings; $_ = .pdf
Problem 01:
#!/usr/bin/perl
use strict;
use warnings;
$_ = \"Let’s rent a bus!\";
s/(.)(\\w).*(\\2).*(.)$/$1$2$3$4/ ;
print \"[\" ; print ; print \"]\";
exit;
output : [Lee!]
Solution
Problem 01:
#!/usr/bin/perl
use strict;
use warnings;
$_ = \"Let’s rent a bus!\";
s/(.)(\\w).*(\\2).*(.)$/$1$2$3$4/ ;
print \"[\" ; print ; print \"]\";
exit;
output : [Lee!].
MulticastingIt is the communication between a single sender and m.pdf
Multicasting:
It is the communication between a single sender and multiple receivers on a network. Typical
uses include the updating of mobile workers from a home office and the episodic issuance of
online newsletters
IGMP works as:
Internet Group Management Protocol is allows a host to promote its multicast group membership
to adjacent switches and routers. IGMP is used by the TCP/IP protocol set to achieve dynamic
multicasting
When a multicast transmission initiates the software creates a multicast group. This multicast
group address consists of an IP address by the first octet in the range 224 – 239 and is particular
in the IP packet as the end address for this traffic. The host initiate the transmission send a
message to the 224.0.0.2 address specify the multicast group address. And the switch receives
this message and adds the multicast group to its table and adds the receiving port as a member of
the group.
PIM works as:
The PIM protocol can be configured to work on IPv4 and IPv6 networks.
Multicast protocols are used to carry multicast packets from one source to multiple receivers.
They ease better bandwidth use and use less host and router processing and ideal for usage in
applications such as video and audio. PIM is a usually used multicast routing protocol.
SDN:
Software Defined Networking is an upcoming architecture that is dynamic, manageable and
adaptable of making it perfect for the dynamic nature of today\'s applications.
Open Flow:
Open Flow is enable for researchers to run experimental protocols in the campus networks we
use every day. Open Flow is added as a feature to saleable Ethernet switches, routers and
wireless access points and provide a regular hook to allow researchers to run experiments
without require vendors to expose the inner workings of their network devices.
Solution
Multicasting:
It is the communication between a single sender and multiple receivers on a network. Typical
uses include the updating of mobile workers from a home office and the episodic issuance of
online newsletters
IGMP works as:
Internet Group Management Protocol is allows a host to promote its multicast group membership
to adjacent switches and routers. IGMP is used by the TCP/IP protocol set to achieve dynamic
multicasting
When a multicast transmission initiates the software creates a multicast group. This multicast
group address consists of an IP address by the first octet in the range 224 – 239 and is particular
in the IP packet as the end address for this traffic. The host initiate the transmission send a
message to the 224.0.0.2 address specify the multicast group address. And the switch receives
this message and adds the multicast group to its table and adds the receiving port as a member of
the group.
PIM works as:
The PIM protocol can be configured to work on IPv4 and IPv6 networks.
Multicast protocols are used to carry multicast packets from one source to multiple receivers.
They ease better bandwidth use and use less host and route.
just moved a new USB 2.0 device from a new system to an older system.pdf
just moved a new USB 2.0 device from a new system to an older system. The new device
worked properly on the new system but doesn’t install properly on the older system. All other
USB devices work properly on the older system.
C. The old system’s BIOS is out-of-date and needs to be upgraded.
Solution
just moved a new USB 2.0 device from a new system to an older system. The new device
worked properly on the new system but doesn’t install properly on the older system. All other
USB devices work properly on the older system.
C. The old system’s BIOS is out-of-date and needs to be upgraded..
IntroductionFew things are more aggravating to produce on a worksi.pdf
Introduction
Few things are more aggravating to produce on a worksite than concrete. Bags of cement, sand,
aggregate (gravel) and possibly other additives must be delivered to the construction area. A
supply of clean water is also necessary, along with a rented concrete mixing hopper. Even after
all the dusty and heavy ingredients have been loaded into the hopper, one small error in the
wet/dry ratio can render an entire batch of concrete unusable. One common solution to this
messy and time-consuming problem is “READY MIX CONCRETE”.
Ready-mix concrete (RMC) is a ready-to-use material, with predetermined mixture of cement,
sand, aggregates and water. RMC is a type of concrete manufactured in a factory according to a
set recipe or as per specifications of the customer, at a centrally located batching plant.
It is delivered to a worksite, often in truck mixers capable of mixing the ingredients of the
concrete en route or just before delivery of the batch. This results in a precise mixture, allowing
specialty concrete mixtures to be developed and implemented on construction sites. The second
option available is to mix the concrete at the batching plant and deliver the mixed concrete to the
site in an agitator truck, which keeps the mixed concrete in correct form.
In the case of the centrally mixed type, the drum carrying the concrete revolves slowly so as to
prevent the mixed concrete from \"segregation\" and prevent its stiffening due to initial set.
However, in the case of the truck-mixed concrete, the batched materials (sand, gravel and
cement) are carried and water is added just at the time of mixing. In this case the cement remains
in contact with the wet or moist material and this phase cannot exceed the permissible period,
which is normally 90 minutes.
The use of the RMC is facilitated through a truck-mounted \'boom placer\' that can pump the
product for ready use at multi-storied construction sites. A boom placer can pump the concrete
up 80 meters.
Objective -
Manufacturing process of ready mix concrete.
Procedure –
Materials required for RMC –
Admixture: A substance added to the basic concrete mixture to alter one or more properties of
the concrete; i.e. fibrous materials for reinforcing, water repellent treatments, and coloring
compounds.
Aggregate: Inert particles (i.e. gravel, sand, and stone) added to cement and water to form
concrete.
Cement: Dry powder that reacts chemically with water to bind the particles of aggregate,
forming concrete. Portland cement is typically used in concrete production.
Fly ash: Fly ash is a by-product from coal-fired electricity generating power plants. The coal
used in these power plants is mainly composed of combustible elements such as carbon,
hydrogen and oxygen (nitrogen and sulfur being minor elements), and non-combustible
impurities (10 to 40%) usually present in the form of clay, shale, quartz, feldspar and limestone.
As the coal travels through the high-temperature zone in the furnace, the combus.
function [M]=trajectory3(x,y,z,pitcher,roll,yaw,scale_factor,step,se.pdf
function [M]=trajectory3(x,y,z,pitcher,roll,yaw,scale_factor,step,selector,varargin);
% operate trajectory2(x,y,z,pitcher,roll,yaw,scale_factor,step,[selector,SoR])
%
%
% x,y,z center mechanical phenomenon (vector) [m]
%
% pitcher,roll,yaw euler\'s angles [rad]
%
% issue|multiplier|multiplier factor} standardisation factor [scalar]
% (related to body craft dimension)
%
% step angle sampling issue [scalar]
% (the points variety between 2 body models)
%
% chooseor select the body model [string]
%
% gripen JAS thirty-nine Gripen heli chopper
% mig Mig ah64 Apache chopper
% Felis catus Tomcat(Default) a10
% jet Generic jet cessna Cessna
% 747 Boeing 747 airplane Generic airplane
% md90 MD90 jet shuttle space vehicle
% dc10 DC-10 jet
%
% elective INPUT:
%
%
% read sets the camera read. Use Matlab\'s \"viewer\" as argument to reprocess this
read.
%
% Note:
%
% Refernce System:
% X body- The axial force on the X body axis is
% positive on forward; the momentum around X body
% is positive roll clockwise as viewered from behind;
% Y body- The facet force on the Y body axis is
% positive on the correct wing; the instant around Y
% body is positive in pitcher up;
% Z body- the conventional force on the Z body axis is
% positive down; the instant around Z body is positive
% roll clockwise as viewered from higher than.
%
% *******************************
% operate Version three.0
% 7/08/2004 (dd/mm/yyyy)
% Valerio Scordamaglia
% v.scordamaglia@tiscali.it
% *******************************
if nargin<9
disp(\' Wrong:\');
disp(\' Wrong: Invalid variety Inputs!\');
M=0;
return;
end
if (len(x)~=len(y))|(len(x)~=len(z))|(len(y)~=len(z))
disp(\' Wrong:\');
disp(\' Uncorrect Dimension of the middle mechanical phenomenon Vectors. Please Check
the size\');
M=0;
return;
end
if ((len(pitcher)~=len(roll))||(len(pitcher)~=len(yaw))||(len(roll)~=len(yaw)))
disp(\' Wrong:\');
disp(\' Uncorrect Dimension of the euler\'\'s angle Vectors. Please Check the size\');
M=0;
return;
end
if len(pitcher)~=len(x)
disp(\' Wrong:\');
disp(\' Size match between euler\'\'s angle vectors and center mechanical phenomenon
vectors\');
M=0;
return
end
if step>=len(x)
disp(\' Wrong:\');
disp(\' angle samplig reckon of vary. scale back step\');
M=0;
return
end
if step<1
step=1;
end
if nargin==10
theViewer=cell2mat(varargin(1));
end
if nargin>10
disp(\'Too several inputs arguments\');
M=0;
return
end
if nargin<10
theViewer=[82.50 2];
end
mov=nargout;
cur_dir=pwd;
if strcmp(selector,\'shuttle\')
load shuttle;
V=[-V(:,2) V(:,1) V(:,3)];
V(:,1)=V(:,1)-round(sum(V(:,1))/size(V,1));
V(:,2)=V(:,2)-round(sum(V(:,2))/size(V,1));
V(:,3)=V(:,3)-round(sum(V(:,3))/size(V,1));
elseif strcmp(selector,\'helicopter\')
load helicopter;
V=[-V(:,2) V(:,1) V(:,3)];
V(:,1)=V(:,1)-round(sum(V(:,1))/size(V,1));
V(:,2)=V(:,2)-round(sum(V(:,2))/size(V,1));
V(:,3)=V(:,3)-round(sum(V(:,3))/size(V,1));
elseif strcmp(selector,\'747\')
load boeing_747;
V=[V(:,2) V(:,1) V(:,3)];
V(:,1)=V(:,1)-round(sum(V(:,1))/size(V,1));
V(:.
Evolution of mitochondria.Mitochondria are believed to have arisen.pdf
Evolution of mitochondria.
Mitochondria are believed to have arisen as prokaryotic cells that got entrapped within a
eukaryotic cell. This event is believed to have occurred 1.4 billion years ago. This theory is the
Endosymbiotic theory of the origin of mitochondria. It states that mitochondria were probably
evolved from specialized bacteria which through the phenomenon of endocytosis were
incorporated in to the cytoplasm of an eukaryote. There is no experimental evidence for the
above theory but circumstantial evidence has been put forward by researchers. They are.,
Solution
Evolution of mitochondria.
Mitochondria are believed to have arisen as prokaryotic cells that got entrapped within a
eukaryotic cell. This event is believed to have occurred 1.4 billion years ago. This theory is the
Endosymbiotic theory of the origin of mitochondria. It states that mitochondria were probably
evolved from specialized bacteria which through the phenomenon of endocytosis were
incorporated in to the cytoplasm of an eukaryote. There is no experimental evidence for the
above theory but circumstantial evidence has been put forward by researchers. They are.,.
AnswerRecombinant DNA Technology It is the set of techniques tha.pdf
Answer:
Recombinant DNA Technology: It is the set of techniques that enables the DNA from different
sources to be identified, isolated, and recombined so that new characterstics can be introduced
into an organism. One of the main techniques in recombinant DNA technology is DNA cloning.
The DNA cloning produces an unlimited number of copies of a particular DNA segment (from a
single ancestral DNA molecule). The Recombinant DNA Technology was engineered by Stanley
Norman Cohen and Herbert Boyer in 1973.
The cell based DNA cloning involve following 4 steps:
1) Construction of recombinant DNA molecule: The hybrid DNA molecules are constructed by
in-vitro covalant attachment (ligation) of the desired DNA fragments to a replicon.
2) Transformation: The recombinant DNA molecules are transferred into host cells, in which the
chosen replicon can undergo DNA replication.
3) Selective propogation of cell clones: The targeted cells were propogated in the selective liquid
medium.
4) Isolation of recombinant DNA clones: The recombinant DNA clones are selectively isolated.
* The enzymes used in the recombinant DNA technology are basically of 4 types:
DNA polymerase, Nucleases, Restriction Enzymes, Isoschizomers
Restriction enzymes: Most naturally occuring DNA molecules are much larger than can be
readily analysed in the lab. To study individual gene and individual site on DNA, the large DNA
molecules must be broken into small (managable) fragments. This could be done using
restriction enzymes. The restriction enzymes are bacterial enzymess that able to cut double-
stranded DNA molecules (by cleaving the phosphodiester bonds) at a specific nucleotide
sequence, called a restriction site. The term restriction comes from the fact that these enzymes
restrict the entry of foreign DNA in the bacteria. There are some enzymes that cut a three base
pair sequence while others can cut four, six, and even eight base pair target sequence in a DNA
molecule, usually palindromic.
The naturally occurring restriction endonucleases are categorized into four groups (Types I, II
III, and IV) based on their composition and enzyme cofactor requirements, the nature of their
target sequence, and the position of their DNA cleavage site relative to the target sequence.
For example: the one widely used restriction enzyme, EcoRI, named because it was found in
certain strain of Escherichia coli and was the first (I) such enzyme found in that species.
Plasmids: Plasmid are naturally occuring cicular, extrachromosomal, autonomously replicating
DNA, present in many prokaryotic and few eukaryotic organisms. These are range in size from 1
Kbp to over 300 Kbp. The cloning vectors, replicating genetic element used to carry a fragment
of target DNA into a host cell for the purpose of cloning. The important features of a plasmid are
as follows:
Solution
Answer:
Recombinant DNA Technology: It is the set of techniques that enables the DNA from different
sources to be identified, isolated, and recom.
a. Major categories1. Chromosomal disorders Due to numerical or .pdf
a. Major categories:
1. Chromosomal disorders: Due to numerical or physical abnormality at the chromosome level.
2. Monogenic disorders: Due to mutation in single gene
3. Complex/Multifactorial disorders: Due to mutation in one or more than one genes together
with extrinsic factors.
Some genetic diseases are called as complex or multifactirial because they are caused due the
combined effect of more than one factors (gene mutation along with environmental factors) and
therefore they are complex un nature. For example if there is mutation in TGFA gene in a
pregnant mother and sge is also exposed to smoking, she will have a significant risk of having
cleft lip/palate in her child. Any of the two factor alone is not sufficient to cause disaese.
b. According CDC, the leading causes of death are 1.heart attacks followed by 2, cancers,
3.respiratory diseases, 4.accidents, 5.stroke, 6.Alzheimer\'s disease, 7.diabetes,
8.influenza/pneumonia, 9.nephritis/nephrotic syndrome/nephrosis and 10.suicide. Of these
1,2,3,5,6, and 7 have genetic sysceptibility and comes under complex/multifactorial disorders. 3
and 8 are infectious diseases.
c. The above disease frequency ranking applies to USA, whereas in Newyork 5th is slightly
higher than 4th.
In World heart attack is at the top followed by respiratory diseases, HIV and cancers. Cancer is
higher in USA as compared to many other parts of the world may be due to higher incidence of
smoking, fast food and industrialization.
Solution
a. Major categories:
1. Chromosomal disorders: Due to numerical or physical abnormality at the chromosome level.
2. Monogenic disorders: Due to mutation in single gene
3. Complex/Multifactorial disorders: Due to mutation in one or more than one genes together
with extrinsic factors.
Some genetic diseases are called as complex or multifactirial because they are caused due the
combined effect of more than one factors (gene mutation along with environmental factors) and
therefore they are complex un nature. For example if there is mutation in TGFA gene in a
pregnant mother and sge is also exposed to smoking, she will have a significant risk of having
cleft lip/palate in her child. Any of the two factor alone is not sufficient to cause disaese.
b. According CDC, the leading causes of death are 1.heart attacks followed by 2, cancers,
3.respiratory diseases, 4.accidents, 5.stroke, 6.Alzheimer\'s disease, 7.diabetes,
8.influenza/pneumonia, 9.nephritis/nephrotic syndrome/nephrosis and 10.suicide. Of these
1,2,3,5,6, and 7 have genetic sysceptibility and comes under complex/multifactorial disorders. 3
and 8 are infectious diseases.
c. The above disease frequency ranking applies to USA, whereas in Newyork 5th is slightly
higher than 4th.
In World heart attack is at the top followed by respiratory diseases, HIV and cancers. Cancer is
higher in USA as compared to many other parts of the world may be due to higher incidence of
smoking, fast food and industrialization..
Alcohols are organic molecules that have a very p.pdf
Alcohols are organic molecules that have a very polar -OH unit somewhere. That\'s
the soluble part, or the \"Like\" part that interacts with water. For instance methanol (CH3OH)
or ethanol (CH3CH2OH) are infinitely soluble in water or miscible with water. As the organic
molecule gets bigger, e.g., (CH3CH2CH2CH2CH2CH2CH2CH2CH2-OH) then the interactions
of the other part of the molecule, or the nonpolar part of the molecule become very significant.
Since these types of interactions are mostly dispersive in nature, water has a harder time
disrupting those interactions to cause the solvation process to proceed.
Solution
Alcohols are organic molecules that have a very polar -OH unit somewhere. That\'s
the soluble part, or the \"Like\" part that interacts with water. For instance methanol (CH3OH)
or ethanol (CH3CH2OH) are infinitely soluble in water or miscible with water. As the organic
molecule gets bigger, e.g., (CH3CH2CH2CH2CH2CH2CH2CH2CH2-OH) then the interactions
of the other part of the molecule, or the nonpolar part of the molecule become very significant.
Since these types of interactions are mostly dispersive in nature, water has a harder time
disrupting those interactions to cause the solvation process to proceed..
A NEWVIEW OF GRAVITYEntropy and Gravity may be crucial concepts fo.pdf
A NEWVIEW OF GRAVITY
Entropy and Gravity may be crucial concepts for explaining roots of familiar force.
Gravity may be defined as masses attract each other. To scholars you could explain that space-
time is warped by mass Or that without gravity, the laws of physics would differ for people
moving at changing velocities.
Such a simple question, has defied a direct answer for centuries. A flurry of recent papers have
examined this new idea, which mixes principles from string theory and black hole physics with
basic old-fashioned thermodynamics.
Nobody has expressed the gravity-as-entropy except theorist Erik Verlinde of the University of
Amsterdam in an online paper(arXiv.org/abs/1001.0785v1). His recipe replicates Newton\'s law
of gravitational attraction, and then with some additional mathematical seasoning he arrives at
Einstein\'s general relativity, the modern and undefeated champion of gravity theories.
Verlinde\'s analysis indicates that gravity emerges from physical dynamics analogous to basic
thermodynamic processes. \"Using only … concepts like energy, entropy and temperature,\" he
writes, \"Newton\'s laws appear naturally and practically unavoidably.\"
some extending Verlinde\'s idea to encompass the history of the universe. Rapid expansion just
after the Big Bang and the more recent accelerating expansion of the universe might all fit into
the entropic-gravity picture of reality.
Entropy means \"disorder,\" with a tendency for higher entropy taken to mean that things like to
get messier any system not resupplied with useful energy reaches equilibrium, and entropy is
maximized. More technically, it is a measure of how likely a system is to be in its particular
configuration. Low entropy describes systems with a very improbable arrangement of their parts.
Curiously, the equations relating entropy to probability are precisely the same as the math used
by computer scientists to quantify information. As the molecules spread out, information about
their location diminishes and entropy rises.
Such loss of information--or increasing entropy--drives many natural processes, such as osmosis,
the mysterious migration of water across a membrane.
In 1995, Ted Jacobson of the University of Maryland demonstrated that the equations of
Einstein\'s general theory of relativity could be derived from basic thermodynamic principles,
who discovered parallels between ordinary thermodynamics and the physics of black holes.
Bekenstein showed that a black hole has entropy, determined by all the matter and energy it has
swallowed. Hawking demonstrated that black holes have a temperature. Since black holes are
basically nothing more than pure gravity.
In 1993 Dutch Nobel physics laureate Gerard \'t Hooft. proposed that reality shares common
features with holograms, like the flashy images embedded in credit cards that store apparently
three-dimensional information on a flat surface. In a similar way, \'t Hooft asserted, information
about the contents in three-d.
4. Answer is colloid. follicular cells, C cells are cells in the thy.pdf
4. Answer is colloid. follicular cells, C cells are cells in the thyroid. Calcitonin and parathyroid
hormone are synthesised by the thyroid.
5. Answer T3 and T4. the hypothalamus senses the levels of the two homones and when their
circulation is low releases the thyrotropic releasing hormone which stimulates the pituitary to
release TSH.
6. The androgen is the male sex hormone produced in the testes.
7. ACTH is a peptide hormone
Solution
4. Answer is colloid. follicular cells, C cells are cells in the thyroid. Calcitonin and parathyroid
hormone are synthesised by the thyroid.
5. Answer T3 and T4. the hypothalamus senses the levels of the two homones and when their
circulation is low releases the thyrotropic releasing hormone which stimulates the pituitary to
release TSH.
6. The androgen is the male sex hormone produced in the testes.
7. ACTH is a peptide hormone.
1A) One of the best explanation for why we conformobey in the real .pdf
1A) One of the best explanation for why we conform/obey in the real world is, generally people
are concerned over the thinking of other people. They tend to behave in such manner that they
can correlate with others in properties like behaviors, belief, attitudes and feelings.
1B) Participants obey the researcher is also based on the above explanations. The participants
obey because the researchers have more knowledge and information than them and the other fact
is the participants have to be in norms of research, institute or centre. So they have to obey
researchers.
2A) No; such obedience is not always beneficial. There are many examples where pupils are
tending to obey the researcher in such a way that they can even forget the ethical rules. Obeying
societal norms and expectations sometimes create disturbing behavior. Society is made of people
so the welfare of people will create welfare society.
2B) Deviant behavior is the behavior which denies the societal norms and expectations. They are
not harmful always. The criminal mind from deviant behavior can be created if it is from
abnormal, inappropriate or dysfunctional mental processes. This is relied to individual’s
personality.
Solution
1A) One of the best explanation for why we conform/obey in the real world is, generally people
are concerned over the thinking of other people. They tend to behave in such manner that they
can correlate with others in properties like behaviors, belief, attitudes and feelings.
1B) Participants obey the researcher is also based on the above explanations. The participants
obey because the researchers have more knowledge and information than them and the other fact
is the participants have to be in norms of research, institute or centre. So they have to obey
researchers.
2A) No; such obedience is not always beneficial. There are many examples where pupils are
tending to obey the researcher in such a way that they can even forget the ethical rules. Obeying
societal norms and expectations sometimes create disturbing behavior. Society is made of people
so the welfare of people will create welfare society.
2B) Deviant behavior is the behavior which denies the societal norms and expectations. They are
not harmful always. The criminal mind from deviant behavior can be created if it is from
abnormal, inappropriate or dysfunctional mental processes. This is relied to individual’s
personality..
1. Water supplies are treated with chlorine to kill pathogens. Chlor.pdf
1. Water supplies are treated with chlorine to kill pathogens. Chlorine reacts well with many
other chemicals because it is a strong oxidant. What does this mean?
Answer: Option 4 Because chlorine is strongly electronegative and needs one electron to fill its
outer shell, it strongly pulls electrons from other substances.
Explanation: Chlorine is known to be one of the most electronegative atoms of the periodic table
( with a value of approx 3 in the pauling scale). This means that it has a very strong tendancy to
attract electron. Also Chlorine (Atomic number 17, configuration of electrons 2, 8, 7) has seven
electrons in the valence shell so it needs one electron to fill its outer shell .
2. Tests to monitor water safety often report the number of fecal coliform bacteria found in
samples. Which of the following statements accurately reflects water safety recommendations
based upon fecal coliform levels?
Answer : Here by mistake the first two options are exactly same, one of them probably needs to
be corrected to
If the level of fecal coliform bacteria is low, then the water is safe for drinking and recreational
purposes.
This option will be the correct option.
Explanation: Fecal coliforms are bacteria which indicate that the water might have been exposed
to fecal matter. They are an excellant proxy to make sure that the water doesn\'t contain any
human pathogens. So if the Fecal coliforms count is low it indicates that the chances of water
containing any human pathogen is also low and therefore it can be used for drinking and
recreational purposes
3. When an individual has severe diarrhea, as can occur with cholera, rehydration solution with
glucose, salt, sodium bicarbonate, and potassium chloride can be administered. Why is it
important to use a solution like this rather than simply giving the individual water?
Answer: Option 1: Diarrhea causes the loss of electrolytes, not just fluids, and it is important to
replace the electrolytes as well. Glucose is transported into intestinal epithelial cells, along with
sodium, by symporters. It is included as well because glucose is not sufficiently absorbed while
sodium is lacking.
Explanation: The answer is self explanatory
4.Vibrio cholerae is a human pathogen that causes cholera. It has an unusual shape distinctive of
its genus. Considering that it does not have one of the most common bacterial shapes, what is the
shape of this species?
Answer Option 2 - Curved rod
Explanation:Vibrio\'s unique curved rod shape is also called the \"comma\" shape. Just helps to
remember it more easily
5. Legionella pneumophilia can grow in water and is transmitted in aerosols. Which of these has
an infection NOT been linked to?
Answer option 4 -ocean water
6. On a global scale, the most important waterborne bacterial pathogens are __________.
Answer Option 4 -Vibrio cholerae and Salmonella enterica serovar Typhi
7. Food that is heavily salted or candied does not need to be refrigerated. Why not?
Answer option 2 -E.
1. stub is usually used for temporary substitute for the code that y.pdf
1. stub is usually used for temporary substitute for the code that yet to be written.
2. it removes the last entry in the array.
Solution
1. stub is usually used for temporary substitute for the code that yet to be written.
2. it removes the last entry in the array..
More from singhanubhav1234 (20)
The answer isD. they are significantly higher than the boiling po.pdf
The answer isD. they are significantly higher than the boiling po.pdf
Silica Fume is a very reactive pozzolana because of its chemical and.pdf
Silica Fume is a very reactive pozzolana because of its chemical and.pdf
Problem 01 #!usrbinperl use strict; use warnings; $_ = .pdf
Problem 01 #!usrbinperl use strict; use warnings; $_ = .pdf
MulticastingIt is the communication between a single sender and m.pdf
MulticastingIt is the communication between a single sender and m.pdf
just moved a new USB 2.0 device from a new system to an older system.pdf
just moved a new USB 2.0 device from a new system to an older system.pdf
IntroductionFew things are more aggravating to produce on a worksi.pdf
IntroductionFew things are more aggravating to produce on a worksi.pdf
function [M]=trajectory3(x,y,z,pitcher,roll,yaw,scale_factor,step,se.pdf
function [M]=trajectory3(x,y,z,pitcher,roll,yaw,scale_factor,step,se.pdf
Evolution of mitochondria.Mitochondria are believed to have arisen.pdf
Evolution of mitochondria.Mitochondria are believed to have arisen.pdf
AnswerRecombinant DNA Technology It is the set of techniques tha.pdf
AnswerRecombinant DNA Technology It is the set of techniques tha.pdf
a. Major categories1. Chromosomal disorders Due to numerical or .pdf
a. Major categories1. Chromosomal disorders Due to numerical or .pdf
Alcohols are organic molecules that have a very p.pdf
Alcohols are organic molecules that have a very p.pdf
A NEWVIEW OF GRAVITYEntropy and Gravity may be crucial concepts fo.pdf
A NEWVIEW OF GRAVITYEntropy and Gravity may be crucial concepts fo.pdf
4. Answer is colloid. follicular cells, C cells are cells in the thy.pdf
4. Answer is colloid. follicular cells, C cells are cells in the thy.pdf
1A) One of the best explanation for why we conformobey in the real .pdf
1A) One of the best explanation for why we conformobey in the real .pdf
1. Water supplies are treated with chlorine to kill pathogens. Chlor.pdf
1. Water supplies are treated with chlorine to kill pathogens. Chlor.pdf
1. stub is usually used for temporary substitute for the code that y.pdf
1. stub is usually used for temporary substitute for the code that y.pdf
Recently uploaded
Supporting (UKRI) OA monographs at Salford.pptx
How libraries can support authors with open access requirements for UKRI funded books
Wednesday 22 May 2024, 14:00-15:00.
BÀI TẬP BỔ TRỢ TIẾNG ANH GLOBAL SUCCESS LỚP 3 - CẢ NĂM (CÓ FILE NGHE VÀ ĐÁP Á...
BÀI TẬP BỔ TRỢ TIẾNG ANH GLOBAL SUCCESS LỚP 3 - CẢ NĂM (CÓ FILE NGHE VÀ ĐÁP Á...Nguyen Thanh Tu Collection
https://app.box.com/s/hqnndn05v4q5a4k4jd597rkdbda0fniiMule 4.6 & Java 17 Upgrade | MuleSoft Mysore Meetup #46
Mule 4.6 & Java 17 Upgrade | MuleSoft Mysore Meetup #46
Event Link:-
https://meetups.mulesoft.com/events/details/mulesoft-mysore-presents-exploring-gemini-ai-and-integration-with-mulesoft/
Agenda
● Java 17 Upgrade Overview
● Why and by when do customers need to upgrade to Java 17?
● Is there any immediate impact to upgrading to Mule Runtime 4.6 and beyond?
● Which MuleSoft products are in scope?
For Upcoming Meetups Join Mysore Meetup Group - https://meetups.mulesoft.com/mysore/
YouTube:- youtube.com/@mulesoftmysore
Mysore WhatsApp group:- https://chat.whatsapp.com/EhqtHtCC75vCAX7gaO842N
Speaker:-
Shubham Chaurasia - https://www.linkedin.com/in/shubhamchaurasia1/
Priya Shaw - https://www.linkedin.com/in/priya-shaw
Organizers:-
Shubham Chaurasia - https://www.linkedin.com/in/shubhamchaurasia1/
Giridhar Meka - https://www.linkedin.com/in/giridharmeka
Priya Shaw - https://www.linkedin.com/in/priya-shaw
Shyam Raj Prasad-
https://www.linkedin.com/in/shyam-raj-prasad/
Honest Reviews of Tim Han LMA Course Program.pptx
Personal development courses are widely available today, with each one promising life-changing outcomes. Tim Han’s Life Mastery Achievers (LMA) Course has drawn a lot of interest. In addition to offering my frank assessment of Success Insider’s LMA Course, this piece examines the course’s effects via a variety of Tim Han LMA course reviews and Success Insider comments.
2024.06.01 Introducing a competency framework for languag learning materials ...
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
678020731-Sumas-y-Restas-Para-Colorear.pdf
KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...
Letter from the Congress of the United States regarding Anti-Semitism sent June 3rd to MIT President Sally Kornbluth, MIT Corp Chair, Mark Gorenberg
Dear Dr. Kornbluth and Mr. Gorenberg,
The US House of Representatives is deeply concerned by ongoing and pervasive acts of antisemitic
harassment and intimidation at the Massachusetts Institute of Technology (MIT). Failing to act decisively to ensure a safe learning environment for all students would be a grave dereliction of your responsibilities as President of MIT and Chair of the MIT Corporation.
This Congress will not stand idly by and allow an environment hostile to Jewish students to persist. The House believes that your institution is in violation of Title VI of the Civil Rights Act, and the inability or
unwillingness to rectify this violation through action requires accountability.
Postsecondary education is a unique opportunity for students to learn and have their ideas and beliefs challenged. However, universities receiving hundreds of millions of federal funds annually have denied
students that opportunity and have been hijacked to become venues for the promotion of terrorism, antisemitic harassment and intimidation, unlawful encampments, and in some cases, assaults and riots.
The House of Representatives will not countenance the use of federal funds to indoctrinate students into hateful, antisemitic, anti-American supporters of terrorism. Investigations into campus antisemitism by the Committee on Education and the Workforce and the Committee on Ways and Means have been expanded into a Congress-wide probe across all relevant jurisdictions to address this national crisis. The undersigned Committees will conduct oversight into the use of federal funds at MIT and its learning environment under authorities granted to each Committee.
• The Committee on Education and the Workforce has been investigating your institution since December 7, 2023. The Committee has broad jurisdiction over postsecondary education, including its compliance with Title VI of the Civil Rights Act, campus safety concerns over disruptions to the learning environment, and the awarding of federal student aid under the Higher Education Act.
• The Committee on Oversight and Accountability is investigating the sources of funding and other support flowing to groups espousing pro-Hamas propaganda and engaged in antisemitic harassment and intimidation of students. The Committee on Oversight and Accountability is the principal oversight committee of the US House of Representatives and has broad authority to investigate “any matter” at “any time” under House Rule X.
• The Committee on Ways and Means has been investigating several universities since November 15, 2023, when the Committee held a hearing entitled From Ivory Towers to Dark Corners: Investigating the Nexus Between Antisemitism, Tax-Exempt Universities, and Terror Financing. The Committee followed the hearing with letters to those institutions on January 10, 202
The geography of Taylor Swift - some ideas
Geographical themes connected with Taylor Swift's ERAS tour - coming to the UK in June 2024
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH A...
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH ANSWERS.
Instructions for Submissions thorugh G- Classroom.pptx
This presentation provides a briefing on how to upload submissions and documents in Google Classroom. It was prepared as part of an orientation for new Sainik School in-service teacher trainees. As a training officer, my goal is to ensure that you are comfortable and proficient with this essential tool for managing assignments and fostering student engagement.
Biological Screening of Herbal Drugs in detailed.
Biological screening of herbal drugs: Introduction and Need for
Phyto-Pharmacological Screening, New Strategies for evaluating
Natural Products, In vitro evaluation techniques for Antioxidants, Antimicrobial and Anticancer drugs. In vivo evaluation techniques
for Anti-inflammatory, Antiulcer, Anticancer, Wound healing, Antidiabetic, Hepatoprotective, Cardio protective, Diuretics and
Antifertility, Toxicity studies as per OECD guidelines
special B.ed 2nd year old paper_20240531.pdf
Instagram:-
https://instagram.com/special_education_needs_01?igshid=YmMyMTA2M2Y=
WhatsApp:-
https://chat.whatsapp.com/JVakNIYlSV94x7bwunO3Dc
YouTube:-
https://youtube.com/@special_education_needs
Teligram :- https://t.me/special_education_needs
Slide Shere :-
https://www.slideshare.net/shabnambano20?utm_campaign=profiletracking&utm_medium=sssite&utm_source=ssslideview
Thesis Statement for students diagnonsed withADHD.ppt
Presentation required for the master in Education.
A Strategic Approach: GenAI in Education
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
Home assignment II on Spectroscopy 2024 Answers.pdf
Answers to Home assignment on UV-Visible spectroscopy: Calculation of wavelength of UV-Visible absorption
Acetabularia Information For Class 9 .docx
Acetabularia acetabulum is a single-celled green alga that in its vegetative state is morphologically differentiated into a basal rhizoid and an axially elongated stalk, which bears whorls of branching hairs. The single diploid nucleus resides in the rhizoid.
1.4 modern child centered education - mahatma gandhi-2.pptx
Child centred education is an educational approach that priorities the interest, needs and abilities of the child in the learning process.
Recently uploaded (20)
BÀI TẬP BỔ TRỢ TIẾNG ANH GLOBAL SUCCESS LỚP 3 - CẢ NĂM (CÓ FILE NGHE VÀ ĐÁP Á...
BÀI TẬP BỔ TRỢ TIẾNG ANH GLOBAL SUCCESS LỚP 3 - CẢ NĂM (CÓ FILE NGHE VÀ ĐÁP Á...
Mule 4.6 & Java 17 Upgrade | MuleSoft Mysore Meetup #46
Mule 4.6 & Java 17 Upgrade | MuleSoft Mysore Meetup #46
2024.06.01 Introducing a competency framework for languag learning materials ...
2024.06.01 Introducing a competency framework for languag learning materials ...
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH A...
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH A...
Instructions for Submissions thorugh G- Classroom.pptx
Instructions for Submissions thorugh G- Classroom.pptx
Thesis Statement for students diagnonsed withADHD.ppt
Thesis Statement for students diagnonsed withADHD.ppt
Home assignment II on Spectroscopy 2024 Answers.pdf
Home assignment II on Spectroscopy 2024 Answers.pdf
1.4 modern child centered education - mahatma gandhi-2.pptx
1.4 modern child centered education - mahatma gandhi-2.pptx
enzymes active site does not have the exact sha.pdf
- 1. enzyme's active site does not have the exact shape of substrate, but the substrate brings about or induces a change in the shape of the active site Solution enzyme's active site does not have the exact shape of substrate, but the substrate brings about or induces a change in the shape of the active site